After loading windows, black screen without cursor
Problem with multiple displays and default monitor selection
a) When working with multiple displays, you can press the WinP key combination. A window will appear with the choice of the mode of operation of multiple monitors. If you have a black screen problem, try selecting “Second screen only” or “Computer screen only”.
b) If using multiple monitors, try leaving only the main display connected and restarting the computer. If an image appears, it is worth checking which display is assigned in the system as the main one.
restart your computer
If Automatic Repair didn’t fix the Windows 10 black screen without cursor issues, try restarting your computer by selecting “Reset this PC using Keep my files”.
Performing a reset lets you choose which files you want to keep or delete and then reinstall Windows.
Here’s how to do it.
- Click Start
- Click Settings.
- Click Update & Security
- Click Recovery in the left pane.
- Click Reset this PC.
- Click Start.
- Select the option Keep my files.
Note. all your personal files will be deleted and your settings will be reset. Any apps you installed will be uninstalled and only pre-installed apps that came with your PC will be reinstalled.
Did any of these solutions help you fix Windows 10 black screen without cursor issues on your computer? Let us know in the comments below.
Editor’s note. This post was originally published in November 2017 and has been since completely revamped and updated for freshness, accuracy, and comprehensiveness.
Windows users of different versions, from XP to 10, sometimes face a strange problem. Immediately after loading the operating system, the disappearance of its logo, or after logging into the account, a blank black screen appears instead of the desktop. There may be a mouse cursor on it, but nothing else happens. Why it can happen and how to fix it.
Rolling back video card drivers
Boot your computer in Safe Mode and go to Device Manager. Expand the item “Video adapters” and right-click on the device you are using, select “Properties”.
Go to the “Driver” tab and select “Roll back”, confirming your action.
Disconnect the device and reactivate it.
Black screen appearing on Windows 10
If a black screen during installation could indicate an incorrect operation of the installer itself, then the appearance of this problem after many months of using Windows 10 may require additional steps to solve it.
The likely reason is that the signal is transmitted through a different output than the one to which the monitor is connected (for example, via HDMI, when the monitor is connected via DVI or vice versa)
Probable solution: Try to connect the monitor through other outputs on the video card or swap if you have two identical outputs on the card.
Probable cause: The signal is being transmitted to the second display. If you have multiple monitors connected to your computer, the system may send the main signal to a different monitor than the main one.
Probable solution: Turn on your additional monitor or TV, most likely you will already see an image on this screen. To return the signal to the main monitor, use the keyboard shortcut “Windows” and “P”, where select from the list to which monitor to send the main signal or duplicate the signal to both devices
Disable Fast Startup or Hibernation
The quick start function helps to save the system state during shutdown. In turn, this allows faster downloads. Sometimes the presence of such a regime causes certain problems. Try turning off fast startup (hibernation). These settings are made on the command line.
To disable hibernation, run the command:
and restart your computer. If the download goes well, then hibernation can be re-enabled with the command:
If disabling the mode did not help, then you should try disabling Fast Startup. Windows 8 and early versions of Windows 10 allow this to be done in power settings. But in the latest builds, disabling is possible only through the registry. Here’s how to do it:
Run Command Prompt and enter the command:
reg add “HKLM \ SYSTEM \ CurrentControlSet \ Control \ Session Manager \ Power” / v HiberbootEnabled / t REG_DWORD / d 0 / f
This command will set the HiberbootEnabled parameter to zero in the fast system startup branch. Reboot your computer.
Black screen appears when booting Windows 10
There can be several reasons for a black screen instead of the Windows desktop. This happens if the wrong default monitor is selected, drivers or Windows updates are installed incorrectly, a poorly configured antivirus may prevent loading, the explorer.exe file may be corrupted, or it may not autostart correctly. Conflicting programs can also cause the problem.
Depending on the symptoms, you can choose one or another solution.
If a black screen appears immediately when you turn on the computer and there is no BIOS or Windows splash screen on the screen, then the problem is not in the operating system. It is worth checking the startup of the computer itself and the performance of its main components.
If a black screen appears after the BIOS window, but before Windows boots (the underscore cursor may blink), then the problem lies in the system boot loader or in the disk drive.
If a menu with options appears on a black background, then you should try to select the usual boot Windows or the last good configuration.
If a message with an error code appears on a black (blue) background, then you need to search the Internet for what exactly is causing this particular problem.
In this article, we will consider in detail the situation when the system booted, but instead of the desktop, a blank black screen appeared without any inscriptions or icons. In this case, the cursor pointer may be present. Please note that in most such cases it is possible to access the system menu by loading it in Safe Mode or by calling the “Task Manager” and using it to enter certain commands.
Below we provide various solutions to solve the black screen problem in Windows.
Black screen in Windows 10, solved in a minute
After updating or installing Windows 10, as well as after a normal reboot of an already successfully installed system, you get a black screen with a mouse pointer, and you do not know what to do, do not rush to get upset and delete the system, there is a way out. In general, this glitch has been going on since Windows 8.1, earlier I told you how the black screen is eliminated in windows 8.1, I advise you to read it too if the methods below do not help you.
The problem is very often associated with glitches of NVidia or AMD Radeon video cards, but this is not the only reason. In this manual, we will consider the situation when Windows 10 boots, sounds are heard, but nothing is displayed on the screen except for an annoying mouse, or you may face another possible situation when a black screen appears after sleep or hibernation (or after turning off and then turning on the computer).
If you have multiple video outputs, try switching the connection to a different port. Often a driver update can include changes that, for unknown reasons, may send the video signal to the wrong port (DisplayPort, HDMI, DVI, Thunderbolt, VGA).
Note: In some cases, in windows 10, a black screen may be caused by a connected second monitor. In this case, try to disable it, and if it did not work, then go to the system blindly (described below, in the section about rebooting), then press WindowsP, once the down key and Enter.
In many cases, you will see a black screen on your device because Windows 10 has lost communication with the display. When this happens, you can use the Windows keyboard shortcut Ctrl Shift B. which restarts the video driver and renews the connection to the monitor. Your screen should blink and refresh, it’s like hitting the F5 key in your browser.
On tablets (such as Surface Pro or Surface Go), you can turn on the screen by pressing the volume up and down buttons SIMultaneously three times.
No matter how funny it sounds, I saw a person who SIMply forgot to turn on his monitor screen, which is why he saw a black screen, and how could it be otherwise
Disk errors can also cause a black screen. To fix them, you need to run the command using the Command Line:
replace “C” with the name of the drive on which the system is installed.
If errors are found as a result of the check, you need to fix them using the command:
The system will indicate that this volume is in use and will offer to check at the next reboot. It is worth answering in the affirmative (Y) and restarting the computer.
Windows 10 black screen without cursor [FIX]
Author Belov Oleg To read 8 min. Views 756 Published 03.09.
Many users have contacted us with black screen error messages on Windows 10, especially with a missing cursor. We have several solutions to offer you people in need.
When something goes wrong on your computer, you can get a blank or black screen.
A black screen can occur in any of the following cases:
- Before and / or after logging into Windows 10
- Black screen with rotating dots
- During setup
- During the update
Each of these instances have their own troubleshooting and how to fix them, but if you get a black screen without a cursor in Windows 10. this is more than meets the eye.
The root causes are usually outdated or corrupted drivers, output to unexpected ports, and sometimes problems with the Lock Screen application. We recommend that you update your drivers automatically using this driver update tool (100% safe and tested by us). This way, you prevent loss of files and even permanent damage to your computer.
Here are some solutions to help you fix Windows 10 black screen without cursor issues.
- Insert the media into the tray or port.
- Start downloading. To do this, when turning on the PC, press F several times
- The screen for selecting the language to be skipped appears.
- In the next window, click on the small link in the lower left corner with a characteristic inscription.
- The first menu appears, the meaning of which is obvious. Click on the desired option (Search and elimination.).
- A menu appears with tons of available options.
Some will want to roll back to a previous version. This is only possible if a dozen have risen recently. In fact, this option is not suitable for most citizens after August 2016. Because the rollback is possible within no more than 30 days from the date of the update. Billy Gates has provided the option to update after that date only to “people with disabilities.” For them, this item may be relevant.
If the system does not want to boot when you turn on the computer, and the display remains black, try the following procedure:
- Start the PC. As soon as the BIOS transfers control to the hard drive, turn off the power. Do the same again.
- You heard that you don’t need to do this, but in this case, for the third time, the loading screen will change to the menu shown below on the screen.
- Press F8 to enter the boot method selection mode. A whole list of options appears, which is not difficult to figure out. If the PC does not start due to the video driver, press 3 and so on. 4 will enable safe mode.
- We choose what we need and start loading. Be careful with option 6, it is not for the faint of heart (very difficult to work).
- From under safe mode, try rolling back new drivers.
The dozen is constantly being cleaned, so the restore points disappear. But this is the first system where in 80% of cases there is at least one slice. If the system does not start, use the very first menu item. The OS selection menu immediately appears. Of course, it’s a dozen. Then a search will be made, and in the worst case, this is waiting for us.
For this reason, the first thing to do when the boot screen does not display on the desktop is to check the restore points.
This is not explicitly stated, but many complain about problems after the update. Perhaps this is a common occurrence, and many are struggling with the same. Look at this topic at least. One and a half thousand people found it useful.
You will see that the problem is not an isolated one, therefore, it cannot be solved at the moment. According to the text, there are both complaints and angry responses regarding the “raw” product. Just roll back as described above and don’t worry about Microsoft issues. It is striking that the list of solutions is extensive, and there are relatively few satisfied people. This is a system issue that can be solved by rolling back drivers and using restore points.
It is not known exactly what this partition does, but after it, the performance is often restored, the system boots and starts working. It is possible that the utility is overwriting the boot loader. We’ve talked about this earlier. Shown several ways to rewrite a partition using diskpart. The text is called Windows 10 Boot Loader Repair.
Black screen when loading Windows 10: we treat with and without a cursor
It’s rare to see a black screen when booting into Windows 10, but it does happen. Various variations are possible: with or without a cursor. It doesn’t matter when the problem appeared: after update, after download, by itself, or caused by a virus.
A unified recovery tool is used to fix it. The installed instance allows you to start the mode through shutdown (holding Shift), but in our case you will have to do it differently. Your best bet is to get bootable media somewhere, although there is another way.
Even a powerful computer sometimes hangs for a long time after updating. Give him another chance. As for netbooks, the authors have updated this to ten all night. I did everything myself. After installation, the bit capacity of the operating system increased, and the computer began to play games with 3D graphics.
So, if the shutdown caused a black screen to appear. Before removing this banner, take care to get the bootable media.
How to roll back a driver
Usually a dozen does not warn when installing new drivers. Therefore, there is a 99% chance that it is impossible to understand why the system stopped loading. The second problem is that the system does not provide information about the installation date. But if the screen is black, then there is a high probability of graphics failure. From safe mode, enter the Device Manager. Checking the installed driver.
If the Rollback. button is active (as in this case), press it immediately. There is a chance that after updating the driver, the screen resolution is incorrect when the computer is turned on. Sometimes the issue cannot be resolved after booting in Safe Mode. And instead of the desktop, we see emptiness, although the speakers play a unique greeting melody. In this case, select the option with a low screen resolution.