Black Screen When Turning On The TV

Black screen on Samsung TV. causes and remedies

When you turn on a SAMSUNG TV, no image appears on the display. Instead of a television picture, a black screen. In this case, the sound is broadcast without any defects. In 90% of cases, the cause of a black screen on a SAMSUNG TV is a hardware problem. It is difficult to identify the problem on your own, but for people who DO NOT understand technology and boards it is impossible. Therefore, the best solution would be to contact the nearest service center.

In any case, you need to know the main reasons that can become a problem in transferring images to a SAMSUNG TV screen.

If the SAMSUNG TV does not turn on at all, we recommend that you first read our instructions.

SETUP REPAIR AND USE SAMSUNG EQUIPMENT

Samsung is one of the leaders in the sale of household appliances and mobile devices. In the past year alone, more than 1,000,000 units of various products from the Korean giant have been sold. Our site will help users to select, use and configure Samsung equipment.

Choose your Samsung device following our tips and tests

Communicate, ask questions, get high-quality tech. support from site experts

Matrix problems

Most often, the main reason for all problems with the display on SAMSUNG TVs is a matrix breakdown. The matrix may fail due to a short circuit or mechanical damage: falling TV on a hard surface or moisture getting inside the device.

Black Screen When Turning On The TV

A faulty matrix cannot be repaired. The only solution to the problem is to replace this component with a new one. You can do this yourself (this requires professional skills in the repair of household appliances) or in a technical service.

Broken power supply

Another reason why the SAMSUNG TV has a black screen instead of an image, but there is sound, is a breakdown of the power supply.

To carry out self-diagnosis, you need to do the following:

  • First you need to discharge the capacitors. To do this, completely unplug the TV and unplug it.
  • Remove the back cover and check the functionality of the fuses, cables and cables.
  • Now carry out a visual inspection of the power supply: if it has charred or melted resistors and capacitors, then these components need to be urgently replaced.
  • Measure the voltage of the output circuit of the power supply. all measurements should coincide with the topics that are indicated in the technical documentation of the SAMSUNG TV.

burnt capacitors

Capacitors can burn out in the TV. they are used to store the charge and energy of the electric field. This problem is especially common in models with a liquid crystal display. One of the reasons for the breakdown of THESE components is sudden voltage drops.

To determine if the capacitors are faulty, you need to remove the back cover of the TV. All the main components, which are responsible for TV operation, are on the board. If the capacitors are swollen. slightly increased in size. this means that an urgent replacement of parts is required. Sometimes swollen capacitors explode, which can be a prerequisite for the breakdown of second components that are on the board.

The matrix cable is damaged

The image on the SAMSUNG TV may disappear due to damage to the matrix loop. a set of contacts and wires that connect the board that forms the image and the display.

To check the performance of the loop, you need to perform a visual inspection of the wires. The damaged areas can be re-soldered to help restore the screen to work. At the same time, there is a high probability of repeated breakdown of the matrix loop.

Therefore, the best solution to the problem is to replace this component with a new one. When choosing a matrix cable, you need to pay attention to the TV model. the part must be original and compatible with the TV brand.

SAMSUNG TV Cable Test

The first step is to check the cable that is responsible for signal transmission (HDMI, antenna, television), and the cable of the Internet provider, which provides digital television services.

There are two ways to check the cable:

  • Search for damaged contacts. To do this, you need to remove the sheath. an insulating material made of PVC or HDPE, under which the wires are located. Next, you should diagnose the contacts and plug (connector, which is inserted into the TV).
  • Using additional software. You can install Monitor Asset Manager (MonInfo) on your computer. The utility detects problems associated with signal transmission to the screen of TVs and monitors. If the program detects a cable malfunction, you need to perform a manual cable check. most likely there are damaged contacts.

Inverter problems

Inverter may burn out in SAMSUNG TV. It is responsible for supplying voltage to the backlight lamps, adjusts the image level and brightness, protects microcircuits and boards from overloads, and short circuits.

If the inverter is defective, the display will stop showing light. This means that instead of the image, the TV will display a regular black screen.

To determine the breakdown of the inverter, you need to conduct a visual inspection of the main components of the TV, which are located on the board under the back cover. To check this component, you need a multimeter. a special device for measuring various electrical quantities.

The inverter can burn out in transformers, lamps or controllers, which are located on the lamps. The burnt part must be replaced with a new one. In some cases, the inverter can be repaired. for this you need a soldering iron.

backlight broke

A black screen on SAMSUNG TV may appear due to a broken LED backlight. When the LEDs fail, the picture with the image ceases to be displayed on the display. the polymer liquid crystal layer ceases to be illuminated.

Solving the problem yourself is difficult, but possible: here are detailed instructions. This requires special equipment and parts. To accurately fix problems with LED backlighting, you need to take the TV to a certified service center.

There is no picture on the TV, but there is sound. how to fix the problem

In our time, a rare person does without a TV. Every year the models become thinner, larger and offer more and more new functionalities. Modern plasma screens with Smart TV technology have little in common with devices that were on sale some ten years ago. However, the commonality between the old and new generations still remains. breakdowns and malfunctions still happen. The reasons can be very different: blows, falling, ingress of moisture and direct sunlight, or an elementary marriage. In this article, we will take a closer look at what to do if the TV has lost the image, but there is sound. Let’s figure it out. Go!

What to do if there is no picture on the TV

First, it should be noted that a similar malfunction occurs quite often in a variety of brands of TVs. TVs of all brands are equally affected by this: Samsung, LG, PhilIPs, Sony, Panasonic and many others. Therefore, it makes no sense to blame the manufacturer.

There are many reasons for the absence of an image on the screen, and you will hardly be able to determine it yourself by eye. Most likely, you will still have to contact a service center or other repair service. It all depends on the nature of the problem. on this below.

It happens that when you turn on the TV, a splash screen with the manufacturer’s logo appears first (LG, Samsung, PhilIPs, and so on), after which the screen simply goes out. With this, you can change channels and hear the sound. Some users noticed that after a while the image appears, but when you turn it on again, everything repeats and there is no picture. In this case, try the following tips:

  • Check the connection of the receiver cord as it may have become disconnected. Make sure the cord is plugged in securely. If there is a signal from the set-top box, many TVs simply turn off the screen.
  • Also, the problem may be in the cable itself. The wire may be damaged or simply be of poor quality. This applies not only to HDMI cables, but also to cables with bells. In them, the transmission of an audio signal and a signal occurs through separate wires, and the problem may lie simply in a broken wire or poor contact. In some cases, replacing the wire can correct the situation.
  • Check the power cable. It must also be securely connected.
  • Some users have found a rather original way to solve the problem. to increase the volume to the maximum (or close to it). After a few seconds, the image will appear and then you can set an acceptable volume level.
READ  How To Make An Application On The Home Screen

Please note that all of the above tips will only help if the screen is working. This is indicated by the splash screen when the TV is switched on. If the screen saver is absent and the screen is constantly dark, this already indicates that some component of the TV that is responsible for the image is out of order.

There are several components, the failure of which can be a prerequisite for the absence of a picture on the screen. The breakdown of the inverter is quite common, which supplies voltage to the backlight lamps. The lamps themselves can also fail, and this, in turn, provokes a breakdown of the power supply. In addition to the faults listed above, it is not uncommon for a matrix or motherboard to break down. Also, the problem may lie in the loops, converter and decoder. In this case, non-working parts and elements will have to be replaced with new ones.

It is not recommended to carry out repairs on your own, since modern TVs are quite complex devices, and you risk aggravating the situation even more. If the above simple tips did not help, then the most correct solution would be to contact the professionals, since the disassembly of the TV will be required. It can be a service center of a manufacturing company or a private office, where repairs will be carried out efficiently and quickly.

One way or another, it is impossible to determine what is the reason for the breakdown of your TV without a thorough inspection. In any case, the device must be disassembled and diagnosed for non-working parts and components. It is best that this is carried out in a workshop with the appropriate conditions, however, if you do not like this option, then many telemasters provide all these services at home.

Of course, replacing some parts can cost a pretty penny, but it should be noted that matrices or motherboards themselves rarely fail. Usually, damage occurs as a result of physical damage to the part, for example, when the TV falls or gets wet. In general, you will NOT do without a telemaster.

Now you know what to do if the TV has lost the picture, but there is sound. You will also understand what could be the reason for such a malfunction. Write in the comments if this article was useful for you, share with other users your experience in solving similar situations, and ask any questions of interest on the topic of this article.

Why does a black screen appear on TV and sound works

Try to find out if your TV has a mute function. This is true for newer LCD / LED TVs such as:

  • PhilIPs (Philips)
  • Toshiba (Toshiba)
  • Sony (Sony)
  • LG (LG)
  • Samsung (Samsung).

Certain TVs tend to mute: This function allows you to listen to the sound of your TV or DVD player while the screen is turned off. Make sure not to enable this function.

But if we exclude all factors from the outside, then only the problem remains at the hardware level. Let’s see what’s the matter.

A common cause of malfunction of new TVs, due to which the image disappears when sound is present, is the failure of lamps or screen backlight LEDs.

The easiest way to determine if the problem is in the backlight or not is: take any light source (lamp, hand-held flashlight or even a flashlight on your phone) and, when you turn on the TV, bring the light source to the screen.

If you see that the image is there, but it is very hard to see, then your lamps or LED strip are out of order. Of course, there is a possibility that the color module, power supply, frame and line scan unit, tuner or matrix are out of order.

If you are NOT an expert in this matter, it is rather difficult to replace or repair the listed parts, therefore, this work should be carried out only by a TV repair specialist.

Why is there a black screen on the TV, but the sound remains?

You are faced with such a problem on the TV: the TV screen is black, but there is sound. Naturally, due to this malfunction, viewing programs is NOT possible. In this article, we’ll show you what to do about this problem. What caused the picture to disappear? Let’s look at the internal and external causes of the problem.

  • To understand what is out of order, first: we look at the equipment. If the equipment is completely new, this malfunction may appear due to the manufacturer’s defect.
  • If the device has served you for several years, there is a possibility that the batteries or backlights are out of order.

It follows from practice that the technique itself most often has nothing to do with it: This malfunction is not always the result of equipment failure. Uninterrupted image reproduction depends not only on internal elements (boards, circuits, blocks), but also on external ones (antenna cable, distribution box, etc.)

DO NOT worry if you just see a black screen when you turn on the TV.

There is a chance that the solution to the problem is very close:

  • Antenna cable (cord)
  • Distribution board;
  • plug;
  • An external antenna located on the roof is the most vulnerable elements in this problem.

Inspect these items, especially the plug. Basically, it is connected from the back to a special connector (socket).

First you need to pull it out of the connector and insert it back. There is a possibility that due to poor contact, the signal fed through the connector is weak. This could be one of the sources of image fading.

Next, you need to connect a second TV (of course, a working one) to the antenna wire in order to check the signal quality.

If, after connecting, a poor-quality signal began to arrive or there is simply an image, then most likely the problem is either in the external antenna or in the antenna cable.

If there is a malfunction in the external antenna, then it remains only to call the organization responsible for its maintenance.

Proper handling of the TV is the key to its long-term service!

Often equipment fails due to improper operation.

Unscrupulous attitude to the appearance of minor faults, mechanical stress, penetration of moisture into the body. all this leads to wear of the components, as a result of which malfunctions appear.

One of the most vulnerable spots in modern TVs is the inverter. This part fails quite often. An inverter is an expensive part, so a specialist will often recommend repairing it rather than changing it. This problem, which caused the disappearance of the picture, typical for TVs of LG and Samsung models.

What is the reason for the missing image on the TV screen connected via HDMI?

Let’s just superficially touch on the connection via HDMI of a computer to a TV. In rare cases, with this connection, the image may disappear quite often. The first thing to do is test the HDMI cable itself. Also check if hibernation is running on your computer.

The sound can also be played, but the picture will not be. Basically, HDMI cable connections can be handled by anyone, and this is NOT a major issue if you have a solid and intact HDMI cable. But this issue has its own pitfalls, which the user may encounter.

So what to do. If you do not have an image when connecting, check the cable for kinks, bends, breaks, if there is such damage, you need to replace the HDMI cable.

You also need to check your settings and make sure your computer has NOT entered sleep mode. Another option is connector failure. In this case, you need to refer the technician for repair to specialists.

These are the main reasons due to which, when connected via HDMI, the TV does NOT display an image.

Don’t forget to tell the author “thanks”, “like” or repost:

Common causes of a black screen on a smartphone

Because of what such a defect may occur:

  • Mechanical damage to the display hardware after the fall of the smartphone;
  • As a result of water ingress into the device (loop closure)
  • Natural burnout of display hardware;
  • Firmware crash causing the display to NOT start (hangs on a black screen).

In rare cases, if the display on the phone does not work, then this may mean mechanical damage to the processor, due to which the device cannot be restored.

When you turn on the phone black screen

Damage associated with a smartphone display is most often a hardware failure and requires specialist intervention. At home, you can try to solve the problem, the phone works, but the screen is black. This article will help diagnose the cause of the breakdown, also described some methods of repairing and restoring a mobile device.

READ  How to flip the screen on iPhone

How to fix the problem with firmware and deep reboot

A black screen on your phone is a clear sign of a system or hardware failure. It is hardly possible to fix this by simply rebooting the device. The first thing to do is to do a deep reboot by simultaneously pressing the volume key and the Power button.

The next way to solve this problem is to restore the operating system firmware, as a result of which all factory parameters will be reset. In this case, only Android devices can be flashed. Assess your capabilities and skills. If restarting and resetting the settings did NOT help, and you cannot update the operating system yourself, Contact the specialists.

To activate the firmware process, you need to enter Recovery mode. The procedure can be performed both with the introduction of third-party software and with the factory update mode. The standard keyboard shortcut for entering Protected Mode is the Volume Up and Power (Lock) button. Depending on the phone model, the combination may change (for example, instead of the volume up button, you will have to press the volume down button).

Next, you need to find the item Reboot, which means system update. If you are using third-party Recovery, you should initially reset the basic parameters in the “wIPe data / factory reset” menu. Next, go to the “install zIP” menu and select the location where the firmware file will be downloaded from. After consent and confirmation of the operation, the update process will begin. Upon completion, the corresponding inscription in English will appear at the bottom (something like Completed). The last action in this operation is to reboot the smartphone, after which the operating system with the display should start loading.

If, when you turn on the phone, the black screen continues to appear even after the firmware, then the problem lies in hardware damage. The same applies to cases when the screen displays a picture, but the backlight does not light up.

If you could not find a solution to your problem. then Contact our Service Center for help

Solving technical problems

To solve the technical problems of how to remove the black screen, it would be wise to use the following plan of action:

  • It is required to make sure that the personal computer is turned on. For this, the presence of working light signals, the sound of a working cooler is checked. In this case, the cursor does NOT appear.
  • It is checked whether the connection cables to the system unit, power cables to the monitor, and whether the button on the monitor is enabled.
  • If a black screen appears when you turn on the computer, then a check is made where the cable is connected to the socket. If necessary, you can reconnect the cable.
  • If your computer uses a built-in and an external card, then you need to check to which of THESE devices the monitor is connected. You may need to switch the cord to a different connector.

In laptops, an output is almost always provided for connecting an external monitor. If, when starting the laptop, you hear the sound of the coolers, which is accompanied by a black screen on the computer, then it is likely that the mode of operation with external monitors was launched on purpose or by accident. On the keyboard, you should find the function keys for controlling the operation of the external monitor and try to turn on the internal display.

The F7 key turns on / off the internal screen, and the F8 key controls the combination of output to the internal / external laptop monitor. They must be pressed at the same time as the function key, which is usually denoted Fn.

Different operating modes are switched by successive pressing of the following key combination: Fn and F8. Considering the question of how to remove a black screen, you can try this method if the laptop’s internal monitor was accidentally turned off.

Causes and solutions to black screen when you turn on your computer

The appearance of a black screen when loading the operating system can at least cause confusion in the user. What is the cause of the malfunction when a black screen appears when the computer is turned on? In this case, there seems to be a launch, but the image does NOT appear (nothing is shown on the monitor). In some cases, even the cursor is missing, there is a signal and it is required to take measures to quickly correct the situation.

Then how to remove a black screen on a working computer when, when turned on, an image does not appear on it? First of all, concepts are required, what exactly is the cause of the malfunction. The reasons for such a breakdown include technical and software, but in 50% of cases the user is to blame due to his inattention, and sometimes simply not knowledge.

Solving software glitch problems

If you encounter a black screen after turning on your computer due to malware or software glitch, then the following steps are recommended:

  • Try booting your operating system in safe mode. If you succeed in this, then you need to continue to follow the steps below. If not, then the only option would be to boot the operating system with the introduction of external media.
  • When the operating system is booted into Safe Mode, it’s worth checking the refresh rate and screen resolution settings. If the computer monitor was not included in this, then they need to be replaced with the correct ones.
  • Then the card drivers are updated. Although safe mode is used, it should be done using Device Manager.
  • If the monitor has been turned on for a long time on the computer, then you need to launch the anti-virus program and carefully scan the PC for the possibility of infection with malicious software. Ruthlessly destroy all files that pose a threat.
  • After completing all the steps, the computer should be rebooted.

When the monitor turns on, turns off immediately, or a black screen appears after upgrading to a new monitor, do the following:

  • Old monitor connects to computer.
  • The minimum screen resolution and refresh rate are set to 60 Hz. This is done in a special utility of the card driver or in the display properties.
  • The computer connects to a new monitor. Now you need to adjust the screen resolution and frequency for the new display.

Main reasons

The technical reasons why the monitor does not turn on, the cursor is not visible and the standard inscriptions are missing at boot are as follows:

  • The PC is switched to a mode for working with an external monitor (in this case, the absence of a signal is relevant for laptops).
  • Loop failure (also a problem only for laptops).
  • card malfunction.
  • The cable was connected NOT to that connector.
  • The cable comes off, which connects the system unit and the monitor. again a black screen appears after loading.
  • The power is off in the monitor, so it does not start, nothing appears on the screen, not even the cursor.
  • monitor malfunction.

Software malfunctions that lead to the fact that the monitor does not turn on when the computer starts up, a black screen appears, include:

  • The presence of a malicious program that prevents the computer from performing work. It is because of her that a black screen is shown on the monitor.
  • Inappropriate screen resolution.
  • The update frequency on the computer card is incorrect.
  • Incorrect operation of the boot loader or drivers.

Unusual reasons

What if the black screen is NOT caused by hardware or software? A black screen may appear due to the banal carelessness of users, which sometimes reach the point of absurdity. Before starting to search for complex causes of the problem, it is worth checking your attentiveness:

  • Could you intentionally or accidentally reduce the brightness of the monitor to a minimum? Then you will NOT say that the monitor turned on for 2 seconds and goes out, but there is no image.
  • Do the metal parts of the PC “short-circuit”? Static electricity can enter computer cases. The device will start shutting down suddenly for the user, even when booting up. This problem is often caused by touching the body of elements conducting current, or a large accumulation of dust inside the system unit.
  • It is worth listening to the sound of the cooler. Is the fan running or unusual sounds? Often, due to a malfunction of the cooling system, a sudden shutdown of the PC occurs. To avoid this problem, the computer must be kept clean. It should not be leaned against cabinets, walls, and NOT near batteries.

In any case, the appearance of a black screen does not necessarily lead the user to panic. In a fit of fear or bewilderment, you can only aggravate the situation. You cannot knock on the system unit and the monitor, this will not solve the problem, or it may even completely disable the computer. It is still not recommended to disassemble the system unit on your own and switch the wires in it if you have no experience in fixing it, and you do not know how the computer works.

READ  How To Enable Freesync On The Monitor

The screen suddenly goes blank and the TV turns off

Samsung TV works fine, but suddenly the screen goes dark and the device turns off. When turned on, the problem can be repeated many times.

  • Energy saving feature enabled. go to settings and disable it.
  • Timer activated “Sleep”. check if the timer is on and disable it.
  • TV goes into standby. signal problem for more than 10 minutes, check connection.

The screen suddenly goes blank and the TV turns off

Samsung TV works fine, but suddenly the screen goes dark and the device turns off. When turned on, the problem can be repeated many times.

  • Energy saving feature enabled. go to settings and disable it.
  • Timer activated “Sleep”. check if the timer is on and disable it.
  • TV goes into standby. signal problem for more than 10 minutes, check connection.

Black screen when turning on Samsung TV

Samsung LED TVs are reliable and popular devices. In the TV of the latest generations of the manufacturer, faults in the first year of operation are found in 5-7% of users. The most common problem is the lack of an image on the screen.

Missing image on Samsung LED TV

We offer step-by-step instructions for restoring the screen of Samsung LED TVs. In 50% of cases, the absence of an image can be eliminated on your own, rather than calling the wizard. So, what to do if the image on your Samsung TV is missing:

  • Check the power supply and that all plugs are connected correctly. If there is electricity, you DO NOT feel the characteristic smell of burning from the TV or the outlet, the breakdown lies in the TV itself.
  • Check the functionality of the device: the presence of sound, loading the splash screen at startup, the operation of the remote control and buttons on the case. If the TV does not turn on, try unplugging for 10 seconds and then plugging it back in. If the image is still there, then go to step 3.
  • Restore TV factory settings. Go to the menu “Support”. “Self-diagnosis”. “Reset”. After entering the pin code, the TV will return to factory settings, having previously turned off and on.
  • On TVs that are equipped with the function “Autodiagnostics”, you can run an image test. During testing, the device checks all settings and the operation of key elements. If the test does not start, then the problem cannot be solved without disassembling the TV.

Life hack: If the Samsung LCD TV responds to the remote control and has sound, but no picture, then try increasing the volume to the maximum. In some cases, such a simple method helps to restore the normal picture.

If none of the above helped to return the image to the screen, the TV must be disassembled to identify the cause of the breakdown and eliminate it. It is better to entrust the disassembly of the device to the employees of the service center or an experienced telemaster.

Self-disassembly of Samsung LED TV

The principle and procedure for disassembling Samsung TVs is virtually the same for all models. It is necessary to put the device face down and Unscrew the rear panel screws, open the latches. Carefully remove the panel and inspect the microcircuits. As a rule, there are two of them. Check the connection of the loops. If everything is in order, then you should check the LED backlight and inverter.

The normal input voltage to the inverter is 10-15 Volts, the output is 60-120 Volts. The parameter depends on the diagonal of the screen: the larger it is, the more voltage. If the voltage is absent or much lower than normal, then the inverter is faulty. Replacement or repair is required. Is the voltage normal? We check the LED backlight strips, apply voltage to each. Having identified the faulty tape, we replace it with a new one. If all tapes are normal, the LED driver is probably burned out, which needs to be replaced.

You are faced with such a problem on the TV: the TV screen is black, but there is sound. Naturally, due to this malfunction, viewing programs is NOT possible. In this article, we’ll show you what to do about this problem. What caused the picture to disappear? Let’s look at the internal and external causes of the problem.

  • To understand what is out of order, first: we look at the equipment. If the equipment is completely new, this malfunction may appear due to the manufacturer’s defect.
  • If the device has served you for several years, there is a possibility that the batteries or backlights are out of order.

It follows from practice that the technique itself most often has nothing to do with it: This malfunction is not always the result of equipment failure. Uninterrupted image reproduction depends not only on internal elements (boards, circuits, blocks), but also on external ones (antenna cable, distribution box, etc.)

DO NOT worry if you just see a black screen when you turn on the TV.

There is a chance that the solution to the problem is very close:

  • Antenna cable (cord)
  • Distribution board;
  • plug;
  • An external antenna located on the roof is the most vulnerable elements in this problem.

Inspect these items, especially the plug. Basically, it is connected from the back to a special connector (socket).

First you need to pull it out of the connector and insert it back. There is a possibility that due to poor contact, the signal fed through the connector is weak. This could be one of the sources of image fading.

Next, you need to connect a second TV (of course, a working one) to the antenna wire in order to check the signal quality.

If, after connecting, a poor-quality signal began to arrive or there is simply an image, then most likely the problem is either in the external antenna or in the antenna cable.

If there is a malfunction in the external antenna, then it remains only to call the organization responsible for its maintenance.

There are images on the screen, there is sound

The TV screen looks dark and the unit reacts to remote control signals. When switched on / off, a splash screen with a corporate logo appears.

  • No signal. check external antenna connection.
  • Incorrect brightness settings. go to the “Pictures” menu and adjust the brightness, turn off the power saving mode.
  • Faulty LED backlight. panel disassembly and replacement required Burned out LED strips.
  • Damage to the inverter. an electricity converter that supplies current to the LED.

When the inverter and LEDs are faulty, the image on the screen is actually present, but in the absence of backlight, it becomes very dark. To diagnose the problem, darken the room and bring a flashlight to the screen. If you see an image, the problem is with the LEDs or the inverter. You can replace faulty parts yourself or call a technician.

Self-disassembly of Samsung LED TV

The principle and procedure for disassembling Samsung TVs is virtually the same for all models. It is necessary to put the device face down and Unscrew the rear panel screws, open the latches. Carefully remove the panel and inspect the microcircuits. As a rule, there are two of them. Check the connection of the loops. If everything is in order, then you should check the LED backlight and inverter.

The normal input voltage to the inverter is 10-15 Volts, the output is 60-120 Volts. The parameter depends on the diagonal of the screen: the larger it is, the more voltage. If the voltage is absent or much lower than normal, then the inverter is faulty. Replacement or repair is required. Is the voltage normal? We check the LED backlight strips, apply voltage to each. Having identified the faulty tape, we replace it with a new one. If all tapes are normal, the LED driver is probably burned out, which needs to be replaced.

Samsung LED TVs are reliable and popular devices. In the TV of the latest generations of the manufacturer, faults in the first year of operation are found in 5-7% of users. The most common problem is the lack of an image on the screen.

The screen has picture and sound

Samsung TV looks like it is turned off, does not respond to remote control signals (remotes).

  • Lack of power. check the back of the TV and the outlet.
  • Processor failure. diagnostics and qualified repair required.

Proper handling of the TV is the key to its long-term service!

Often equipment fails due to improper operation.

Unscrupulous attitude to the appearance of minor faults, mechanical stress, penetration of moisture into the body. all this leads to wear of the components, as a result of which malfunctions appear.

One of the most vulnerable spots in modern TVs is the inverter. This part fails quite often. An inverter is an expensive part, so a specialist will often recommend repairing it rather than changing it. This problem, which caused the disappearance of the picture, typical for TVs of LG and Samsung models.

| Contacts | Content | RSS