Black screen when turning on Windows 10
Reinstalling Windows from a USB flash drive
There is a fairly simple solution. reinstall Windows 10 from a USB stick. “Fresh” OS works stably, conflicts with hardware can occur, but this does not happen very often.
All you need to create such a portable installer is a USB stick, a work computer, an ISO image with Windows 10, and the Rufus program. It is required to write Windows to a USB flash drive. so,
- Launching Rufus.
- In the Boot selection, specify the location of the iso file.
- In Device, select the media to which the Windows Installer is recorded.
- The rest of the settings can be left alone, they will be set automatically.
- Press Start, wait for the end of the recording.
- Reboot the PC, specifying the USB flash drive in the BIOS as the priority bootloader.
- Reinstall Windows.
Hardware driver conflict with Windows 10
When loading Windows 10. black screen. This happened after installing the drivers from DriverPack Solution. After starting the system, a black screen is displayed, while the cursor is visible, there are sounds from programs that were opened in the browser. Windows does not respond to anything, restarting did not help, and does not enter safe mode.
How to fix. You can use a bootable disk or a Windows 10 flash drive, select a recovery mode, specify a rollback point before installing the drivers. Black screen after booting Windows 10 is likely to go away.
You can also enter Windows Safe Mode in the following way.
In addition to the above methods, manual replacement of hardware (namely, a video card) or switching through the BIOS of an external video card to an integrated one (if any) helps. Sequencing:
- Insert another video card into the motherboard.
- Try to log in and remove the old drivers manually.
- Change the video card to the old one and turn on the PC.
How to remove black screen when booting Windows 10
Almost all Windows users saw a black screen at boot time. This is a sure sign that the OS cannot boot correctly. Restarting does not always help.
Unfortunately, even installing the latest version of the OS. Windows 10. does not insure against a black screen. This is often due to software compatibility issues, conflicting / outdated drivers, and other factors.
In this guide, we will look at various options for bypassing the black screen for Windows 10. If you have an older version of the OS, refer to this instruction for Windows 7 (it is also relevant for Windows 8 and partially XP).
Resetting BIOS to factory settings
When trying to reinstall Windows 10, I went into the BIOS to prioritize booting from a USB flash drive. But along the way, I activated some option. and the computer turned off. After restarting, only a black screen is observed. The PC does not respond to the keyboard shortcut. Tell me, please, what can it be?
How to fix. In this case, there is not a Windows 10 problem, but an error during the hardware initialization phase. Simply put, the computer’s OS does not recognize the hard drive and boots from another device. To solve this problem, you need to go to the BIOS menu and change the boot priority, specifying the hard disk or SSD as the boot device.
- You can enter the BIOS most often by holding Del or F2 while starting the PC.
- In the Boot (Boot device priority) section, it is enough to specify the desired device or change the order by moving the HDD name to the top of the list.
- Save settings and reboot PC.
Boot in safe mode and remove viruses
Viruses like to disable the operating system. As a result, Windows either works with errors or does not load correctly.
How to restore Windows boot if damaged by viruses? If safe mode works and the OS allows you to work in it, perform a comprehensive (i.e. maximum) virus scan. It is not at all necessary to install a paid antivirus, I would recommend Dr Web CureIt (you can download it here), this solution is quite suitable for emergency cases.
- Boot Windows in Safe Mode.
- Install Dr Web CureIt, Run Scan.
- Wait for the scan to finish, move the infected files to Quarantine.
- Restart Windows 10 normally.
Answers to readers’ questions
Windows 10 after logging in gives a black screen and we have a smaller blue screen and it says “there was a problem, please try again”. I’m doing the recovery, it’s successful, but (!) After booting the system and logging in from the beginning, it shows my wallpaper icons and so on for a few seconds I’m happy, and then again just a black screen pops up, as if something is interfering or is there an error somewhere? Help I do not know what to think already and what to try! Drivers? HDD error?
The problem is this. I have Windows 10, when it is turned on, it boots, everything is shown on the monitor, then a black screen, sounds. as when turned on, but the screen is black, there is no mouse cursor. Before that, I disconnected all the wires, since the button broke, but I made it and connected everything in place. Tell me what to do?
I have Windows 10. OS prompted me to install new drivers. I installed them. Further, after switching on, a black screen with a cursor began to appear. You wrote above that you need to reinstall Windows, but how to do it without the screen and Windows itself?
The PC worked. I put it on sleep mode. After a few hours, I turned it on, and the monitor is black, the system unit works, but Windows does not start. There is nothing on the screen, not even a cursor. I tried through f8. nothing happens. Windows 10 operating system.
Hello. From the very morning my laptop hung and the Internet stopped working (I have Windows 10). In the evening, it began to turn off and after a while only a black screen and a cursor appeared. I tried to check it for errors, but this screen still appears. Safe mode works, but no updates have been observed in the last 4 days.
The screen is black, shows the logo, but Windows 10 does not start, enter the BIOS via F9, Yepo 737A laptop, the new one has not yet used (did not have time) at startup, the English language, I wanted to change, that’s all
Hello!) The problem is this, when the computer is restarted, a black screen, the system unit makes a noise, but Windows does not load, because there is no sound, installed the official drivers, reinstalled Windows 7/10, a new hard drive (more precisely, an SSD). I don’t remember if this happened after replacing the processor. But I bought a Xeon E5440 with Ali at one time, flashed the BIOS, after a while 2 slots for RAM stopped working, only 2 out of 4 slots work. The problem is solved only by shutting down, not rebooting the PC. “
A black screen without a cursor, I didn’t do anything like that before, but before that the screen rippled and shifted for a very long time. There seems to be an installation disk for the monitor. Can you tell me how to fix it all?
When you turn it on, the inscription “Asus” is displayed, as usual, and then just a black screen with a disappearing underscore at the top left and that’s it. There is no cursor, f8 does not lead to anything when loading, if you wait, then nothing happens
Installed the program from the disk to the computer and the screen turned off, the computer itself is working and music is playing, what to do?
Hello. I was playing a game the other day, everything froze and vertical sandy stripes appeared on the monitor. I reboot the computer and during Windows boot, when it almost comes to entering the password, just a black screen, the desktop does not load. You can enter safe mode. Windows reinstalled, does not help. Windows 10 pro.
Good day! We have assembled a completely new computer, haven’t really used it yet. One evening, while watching the series, the screen just went out, but the PC did not turn off. After rebooting, there is no video signal on the screen, and the PC itself turns on and off (the fans light up, vidyaha, but the monitor does not receive a signal). Thank you in advance!
Hello. The problem is as follows. When you turn on the computer, it does not turn on, there is a black screen, the system unit is noisy. The fan of the processor and power supply is running. RAM is installed, all cables are working (tested on another PC), the monitor is working, on the mat. all cables are perfectly installed on the board. I tried to change the power supply unit, it did not help. I checked the processor, it is clean, no signs of warming up. RAM is clean too. I looked after the computer well. The connectors also work. I tried to install a new working video card, it did not help either. The problem arose after 2 months of inactivity. When turned on, nothing appears on the monitor, a black screen and that’s it. Mat. the fee does not squeak (it seems that it did not give it before) Help solve the problem, the problem arose on its own. I don’t want to throw it out. The craftsmen could not fix it, they say it is necessary to change the board, but they do not specifically know where the problem may be on the board. The board is not cheap, and the PC is not a new generation. Help solve the problem. Thank you in advance!
Boot in Safe Mode
If the system does not boot during normal startup, you can use safe mode. Need to:
- Hold down the F8 key while logging in.
- Select the most suitable option by clicking in the range from 4 to 6.
It will automatically reboot and enter Safe Mode.
Turn off high contrast
A contrast level that is too high may result in a black screen after entering the password on the system. To disable you need:
- Boot into Safe Mode.
- Run keyboard shortcut Win I.
- Go to the section “Accessibility”.
- On the left in the menu, open the “High Contrast” item.
- Move the slider to the inactive position under the inscription “Enable high contrast mode”.
Stopping the RunOnce Process
RunOnce is for managing temporary tasks. A failure in the utility can lead to system malfunctions. To deactivate the process, you need:
- Go to the “Task Manager” with the keyboard shortcut Ctrl Alt Delete.
- Find RunOnce among the running applications. select and click “End task”.
- Search for a component in the “Services” tab, right-click, click “Stop”.
- To restart a computer.
Ways to fix black screen when turning on your computer
There are many ways to fix startup failures. A black screen may occur due to manipulations performed during operation:
- connecting third-party devices to the video card connector;
- incorrect installation of drivers;
- activity of malicious software (software), due to the lack of antivirus;
- crash in running applications.
It is necessary to consistently follow the recommendations to eliminate errors:
- deactivation of fast launch;
- boot in safe mode;
- checking for connection problems;
- advanced startup using bootable media.
Removing and reinstalling video card drivers
Perhaps the failure occurs due to incorrect operation of the video card driver. In this case, you need to uninstall the software and perform the installation again:
- Go to Safe Mode.
- Perform a system search “Device Manager”, open.
- Find the video card in the “Video adapters” tab.
- Click on the name of the PCM device, select “Properties”.
- In the “Driver” window, click on Remove.
- Wait until the end of the process, restart the computer.
Black screen on Windows 10 startup
Black screen when loading Windows 10 is a problem associated with incorrectly installed operating system (OS) updates or a violation of the integrity of system files. The manifestations of incorrect operation of the OS can be different, for example, a dark background and a circle appear instead of the cursor, or there is no sound and reactions to the use of peripheral devices.
- Ways to fix black screen when turning on your computer
- Deactivating Fast Launch
- Boot in Safe Mode
- Checking for connection problems
- Advanced startup using bootable media
- Problem Occurs After System Upgrade
- Removing updates
- Rollback via a restore point
- Black screen after entering password
- Restart Windows 10
- Shutting down and restarting explorer.exe
- Using the integrated video chip
- Removing and reinstalling video card drivers
- Display detection
- Disconnecting unnecessary devices
- Turn off high contrast
- Stopping the RunOnce Process
- Uninstalling security software
- Create a new account
Restart Windows 10
If such a failure occurs, restarting your computer may help. Perhaps the error is temporary and will disappear after restarting. If necessary, you can use safe mode.
How To Fix Black Screen After Boot On Windows 10 | Easy Fix For Black Screen Of Death
If successful, it is recommended to check your computer for malicious software, reinstall or update drivers, delete unnecessary files to free up disk space.
Invalid screen resolution
Often the reason for the appearance of a black screen is an incorrectly selected display resolution. In this case, the user will not be able to use the Windows graphical shell.
The problem is solved by starting the video mode at low resolution. This parameter is activated when safe mode is on. You need:
- Remove inserted CD and disconnect USB devices (excluding peripherals).
- While restarting the personal computer, hold down the F8 button on the keyboard.
- Select the “Advanced Boot Options” option.
- Find in the list “Enable low-resolution video mode”.
To change the resolution, select the option “Enable low-resolution video mode”
After applying this parameter, the screen resolution will be 640 × 480 pixels (all devices support it). Then you can log in and set the appropriate screen resolution in the “Display Settings”.
Installing new drivers for the video card
A black screen may appear after updating and installing drivers on the video card. At the same time, when using standard connectors like VGA, such problems may not occur.
How to Fix Windows 10 Black Screen After Login? (7 Ways)
The solution to the problem is to reinstall the graphics adapter software:
- Log into the OS through Safe Mode with Network Driver Support.
- Open the official website of the manufacturer of your video card model.
- Specify the series, model of your device, as well as the bitness of the installed operating system, and then search for the appropriate software. The exception is when your video card is outdated and not supported by the operating system you are using.
Log into the official website of the video card manufacturer and find the software to install
It should be noted that it is recommended not to download and install test driver variations. They can be unstable and cause errors in the computer.
All that remains is to download and install the software, and then restart your personal computer.
Conflicts with connected devices
Often the problem associated with the appearance of a black screen appears when several monitors are simultaneously connected to one personal computer.
If a black screen appears after connecting a second monitor, you should disconnect it and restart the PC
The solution to this problem is very simple. just turn off the second device, and then restart the PC.
To restart your PC on a black screen, follow these steps:
- Wait until the personal computer boots up, then press the Backspace key on the keyboard several times (it is necessary to exit the lock screen and, with the password set, delete all characters).
- Enter the password for the account, if one is set. Remember that by default in Windows 10, when the operating system starts, Russian is set. You can switch the layout by pressing the Win Spacebar buttons at the same time.
- Use the Win R combination and specify the shutdown r / command and confirm the action with the Enter key. Press it a second time and the computer will restart.
This method will allow you to reboot your device in an optimal way, even when the screen is off or black. Otherwise, you will know that the problem is precisely in the operation of the device’s graphics adapter driver.
If your computer has integrated and discrete graphics cards, try connecting the cable from the monitor to the integrated graphics adapter (usually the connector is on the motherboard). After that, turn on the device again and check the result.
If the integrated graphics adapter was disabled in the BIOS settings (usually done by the user himself), then take care to activate it again, otherwise the method will not work.
Types of black screens
Most of the problems associated with displaying graphic elements directly depend on the installed drivers for the video card and the operability of the device itself. In this case, the black screen can be of two types: with or without a mouse pointer.
One of the common reasons for a black screen with a cursor can be the installation of updates for Windows 10
This error can occur after installing regular updates for the Windows 10 operating system, waking up from sleep or hibernation mode, and when starting the device.
Clean install of the operating system
The last resort, which should only be used if none of the above options helped, is a clean install of the Windows 10 operating system. This can be done using the appropriate media that contains the OS image.
It must be said that the user will have to completely format the installed hard drive, so that the problem does not recur later with a newly installed OS. This can be done when selecting a partition for installation using the “Format” button.
To reinstall Windows 10, do the following:
- Enter BIOS using the Del button when the computer boots.
- Change the boot parameters of the components so that the component to which the media with the image is connected (USB flash drive or CD) is launched first. Save changes and exit.
Find the Boot partition in the BIOS and change the boot order of the system elements
Specify the required options to install Windows 10 and follow the instructions
Follow the instructions described and wait for the installation to complete. When you start the Windows 10 operating system, all the necessary software will be installed automatically.
There can be several reasons for the appearance of a problem in the form of a black screen with a cursor, and they are associated with software or hardware malfunctions:
- incorrect screen resolution, and therefore the graphical interface is not displayed;
- a malfunction of the graphics adapter driver;
- malfunction of the video card or power supply (low power).
The same problem may appear if errors occur in the operation of the operating system after:
- incorrect installation of software or system updates;
- incorrect cleaning of the computer (for example, after working in the system registry);
- emergence of malware.
Viruses and Trojans can seriously damage the state of your personal computer. Most of these programs are created with the aim of deleting or damaging important system files. In this case, if the user has not secured himself in advance by installing an antivirus, he will see a black screen. In this case, the cursor can be displayed and react to user manipulations.
The solution to the problem is quite complex and specific. To do this, you need to do the following:
- Turn off the personal computer and unplug the power cord.
- Open the system unit and remove the hard drive, having previously disconnected all the cables.
- Connect your hard drive to a working computer.
- Install antivirus or use the existing one to scan the connected drive.
Diagnose and check the connected hard drive using antivirus
Such a check will quickly and effectively get rid of an urgent problem.
If you are not sure that you can handle all the manipulations on your own (for example, connect the cable to the wrong connector), it is better to call the wizard. Otherwise, you risk losing your hard drive.
Disable AppReadiness Service
In the task manager, find the “Services” tab and find the AppReadiness service, if it is enabled, then through the right click try to disable it, and set the “Manual” startup type in the properties. Then we restart the computer.
Removing and reinstalling video card drivers
If the previous method did not work, you should try to remove the video card drivers from Windows 10. You can do this in safe mode or in low-resolution mode, and I will now tell you how to get into it, seeing only a black screen (two ways for different situations).
If you manage to press the CTRL ALT DELETE key combination against the background of a black screen and you see a blue window with the ability to manipulate the computer, then hold down the SHIFT key and select restart in the right corner.
As a result, you will be taken to the “Select Action” menu. We select the item “Troubleshooting”
Next, select “Additional parameters”
If CTL ALT DELETE doesn’t work. On the login screen (black), press Backspace several times, then Tab 5 times, press Enter, then up once and holding Shift, Enter again. Wait about a minute (the diagnostics, recovery, system rollback menu will load, which you probably won’t see either).
- Down three times. Enter. down two times. Enter. left two times.
- For computers with BIOS and MBR. down once, Enter. For computers with UEFI. two times down. Enter. If you do not know which option you have. press “down” once, and if you get into the UEFI settings (BIOS), then use the option with two clicks.
- Press Enter again.
The computer will reboot and show you the special boot options. Using the number keys 3 (F3) or 5 (F5) to start Low Resolution Mode or Safe Mode with Networking. Once booted, you can either try to run System Restore in the Control Panel, or delete the existing video card drivers, and then restart Windows 10 in normal mode (the image should appear) and reinstall them.
If this method of booting the computer for some reason does not work, you can try the following option:
- Log in to Windows 10 with a password (as described at the beginning of the instructions).
- Press WinX keys.
- Press up 8 times, and then. Enter, the command line will open.
At the command prompt, enter (must be in English):
Additionally: if you have a bootable USB flash drive with Windows 10 or a recovery disc, then you can use them: Restore Windows 10 (you can try using restore points, as a last resort. resetting the system).
How to fix random black screens
And then there are black screens that happen out of the blue. Windows 10’s new servicing model (that is, endless fixes and updates) means that Windows updates, fixes, security fixes, and driver updates are often downloaded in the background and installed at night, completely invisible to you. If you want to determine which Windows updates are installed and when, you can, but if they already passed you by and gave you a black screen, try booting into Safe Mode. Then they should be removed. To open the control panel and go to “Programs and Features”, then find the item “View installed updates”
Then we look at the latest updates and delete them, do not forget to then restart your computer and check the result.
A corrupted user profile can sometimes cause a black screen. Trying to boot into Safe Mode, creating a new user account, and then trying to log in to it may help. In the task manager, call a new task, or if safe mode allows you to open Start or display the Run window, after pressing the WIN R keys, then type netplwiz.
You will see the “User Accounts” window, click the “Add” button
We select “Sign in without a Microsoft account” and then.
We fill in the details of the new account.
Done. A new account has been created. It remains to give her administrative rights.
Select a new user, go to his properties and assign him the “Administrator” group
In the end, it turned out like this, now you can try to log in as a new user. The data can then be easily restored by copying it from the old profile.
RunOnce processes could also be the culprit. If you all see a black screen after logging in, press Control Shift Esc on your keyboard, this will launch the Task Manager. Click the Processes and Services tab, and then locate all instances of RunOnce32.exe or RunOnce.exe. If you find that they are running, stop the process, cancel the application, or terminate the service. It is better for the service to set it manually at startup.
Disconnecting unnecessary devices
Peripherals connected to your computer may cause a black screen or black screen with spinning dots during startup. If you encounter something similar, disconnect all peripherals (such as printers, cameras, removable drives, Bluetooth, and other USB devices) from your computer.
Start your computer again and if everything works fine, then you have a problem with one of your peripherals. You can figure out which one is causing the problem by plugging in one peripheral at a time until you stumble upon the one that is causing the conflict. Once you know the device that is causing the problem, unplug it, restart your computer, and then do a web search to see if there is a hotfix or contact the device manufacturer for help.
Restart Windows 10
One of the working ways to fix the problem with a black screen after re-enabling Windows 10, which seems to be quite workable for owners of AMD (ATI) Radeon graphics cards, is to completely restart the computer and then disable Fast Startup of Windows 10.
In order to do this blindly, after booting the computer with a black screen, press the Backspace key several times (left arrow to delete a character). this will remove the lock screen saver and remove any characters from the password input field if you accidentally entered them there.
After that, switch the keyboard layout (if required, by default in Windows 10 it is usually Russian, you can switch it almost guaranteed with the Windows Spacebar keys) and enter your account password. Press Enter and wait for the system to boot.
The next step is to restart your computer. To do this, press the WindowsR keys on the keyboard, wait 5-10 seconds, enter (again, you may need to switch the keyboard layout if you have Russian by default):
and press Enter. After a few seconds, press Enter again and wait about a minute, the computer will have to reboot. quite possibly, this time you will see an image on the screen.
The second way to restart Windows 10 with a black screen is after turning on the computer, press the Backspace key several times (or you can use a space or any character), then press the Tab key five times (this will take us to the on / off icon on the lock screen), press Enter, then. the “Up” key and again Enter. After that, the computer will restart.
If none of these options allow you to restart your computer, you can try (potentially dangerous) force shutting down your computer by holding down the power button for a long time. And then turn it back on.
If, as a result of all the proposed, the image appears on the screen, then it is precisely in the operation of the video card drivers after a quick start (which is used by default in Windows 10) and to avoid a repetition of the error.
Restarting Windows Explorer
Very often, users do not turn off the computer, but simply put it to sleep. Windows system is not without sin, and it can easily freeze services, the cornerstone for the system is the explorer.exe service (Explorer). First of all, in order to fix your black screen on your Windows 10, try restarting File Explorer. To do this, press the key combination CTRLSHIFTESC (Simultaneously) on the background of the black screen. As a result, “Task Manager” will open for you. We find the “Explorer” service there, right-click on it and select the “Restart” item.
If you do not have an active process, then you can select the menu “File. Start new task”
We write in the window of a new task, explorer.exe and press Enter. As a result, the explorer service will be running, and the black screen at the entrance may disappear.
If the CTRLSHIFTDEL key combination did not help you and the task manager did not appear, then you can press CTRLALTDEL on the background of the black screen and select the “Task Manager” item, and then the sequence of actions as above.
Note 2: If you see the login screen, and after login, a black screen appears, then try the next option. On the login screen, click on the on-off button at the bottom right, and then hold down Shift and click Restart. In the menu that opens, select Diagnostics. Advanced Options. System Restore.
Updating the BIOS on a computer
Recently I saw a case that a user updated his Windows 10 1809 to version 1903 and received a black screen at the entrance, as a result, it turned out that his hardware did not perceive the new version of the system. The way out of it was to update the hardware BIOS through Windows Safe Mode, or the opposite situation, when an advanced user, on the contrary, installed a fresh BIOS version and it turned out to be unfinished, I saw an example from my friend, when he rolled onto his Asus through the ez update utility, the fresh version, after rebooting I admired the black screen, all the manipulations given above had no effect, rolling back the BIOS version to the previous one brought everything back to work.