Can the candy bar be used as a monitor

Table of Contents

Main component

The main component of this circuit is a small adapter. a capture device that allows you to convert the HDMI signal via the USB port into a format that is available for display and streaming: https://besprovodnoe.ru/catalog/perekhodniki-konvertery-adaptery-kabeli-preobrazovateli/adapter- dlya.

It can be connected to a laptop, PC / monoblock, smartphone and tablet and watch and broadcast the signal online from any HDMI source. There are also versions of capture cards with a large number of input ports, which will allow not only to receive a signal from HDMI, but also from analog ports for video and sound, as well as connect a microphone, a pass-through monitor and other additional devices: https://besprovodnoe.ru/ catalog / perekhodniki-konvertery-adaptery-kabeli-preobrazovateli / filter / hd_ca.

How to connect a candy bar to a computer

To make the connection, you need an HDMI to HDMI cable. One end of the wire must be connected to the appropriate connector on the processor. The other end attaches to the monoblock. Connection is carried out exactly to the HDMI connector. Output.

Further, it is necessary to put the device into a mode in which it receives the incoming signal. As a rule, there is a corresponding button on its body.

By SIMple manipulations from the monoblock, you can make a full-fledged computer monitor.

Subscribe to our Social Networks

Hello dear readers! Today we will touch on a rather popular topic. turning a computer, smartphone or tablet into a full-fledged monitor, as well as streaming from a camera, DSLR, set-top box (PlayStation 4, Xbox ONE etc.) and any HDMI to youtube via a smartphone.

What computer, smartphone or tablet you need?

For SIMple display of the picture on the screen, you need any computer with a USB3 port:

candy, used, monitor

laptop, smartphone or tablet with a USB Type-C port: or a mobile device with any other port, but with an adapter to USB Type-C or USB3.0 Host:

If, in addition to displaying, you also need to stream (for example, on youtube), then the device must have Internet access with a tariff plan that gives speed and allows you to spend traffic in such volumes (on a FullHD signal, lay about 5 Mb / s. this is about 40-50 megabyte of outgoing traffic per minute of video with sound). Of course, it’s better to have unlimited traffic.

For what and who needs it

  • Let’s say you have a constant need for a monitor “with you”. we will tell you how to turn a smartphone into a monitor;
  • Do you have a large tablet that would be nice to use as a monitor or even a TV. connected to a computer or satellite and game console? Let’s show you how to do it;
  • Your chic candy bar does not have a video input with sound and cannot be used as an external screen.!
  • We brought a laptop with a good screen to the dacha and we want to play a game console on it or watch satellite TV through a receiver;
  • You have a camera with HDMI output or a game console and you need to quickly and efficiently organize a stream on youtube, twitch or any other streaming service. Get your smartphone out of your. let’s get started!

What we will watch on the screen and stream?

It can be any device with an HDMI output (as well as miniHDMI and microHDMI if there is a “tail” to HDMI). HDMI is a digital interface that outputs video with audio in high quality (from SD to HD / FullHD and UHD 4K). Such an interface is present on almost all modern multimedia devices. on computers, laptops, cameras, cameras, players, TV-game and satellite consoles, media players and other devices with video and sound output:

What is monoblock

In SIMple words, this is a system unit and a monitor assembled in one case. It looks like a regular liquid crystal screen, but is somewhat thicker. It also houses various controls.

This type of personal computer has several advantages. It:

  • Compact size. We can say that its main advantage. In terms of size, it does not differ much from TVs of medium diagonals. At the same time, it has a full-fledged filling, like a full-fledged PC. Thanks to this, it takes up a minimum of space on the desktop, and if necessary, you don’t have to buy a special computer desk at all. Compact PC easy to fit on any surface.
  • Convenience. The device is self-sufficient. There is no need to connect the processor to the monitor, so the number of wires used is reduced. After all, a mouse and keyboard are enough for work. If desired, you can connect speakers, but the standard acoustics of monoblocks are usually of high quality.
  • Some models have a very user-friendly touch screen.
  • Almost silent operation.

The disadvantages include:

There is only one minus, but a big one. In terms of their characteristics, they are close to notebooks with average parameters. Since the design is quite compact, it does not allow placing ordinary components, and due to the close location of the matrix, the requirements for them are quite stringent. Everything should be small and have a low temperature during operation. It is impossible to improve them on your own.

Usually such devices are used for work by professional photographers and designers. High display characteristics and a rather powerful processor allow you to work with special programs that are rather “heavyweight”.

Can I use a candy bar as a monitor

Sometimes a person uses a candy bar for a while, and then buys a processor. And then he has a question: “Can I use it as a screen or do I need to buy a monitor?”.

ATTENTION! It is possible to connect only if the monoblock has an HDMI INPUT, that is, it is able to receive the incoming signal.

Use the all-in-one as a monitor

The first personal computers were huge in size and combined both display and hardware components. With the development of digital technologies, their size gradually decreased, and monitors began to be manufactured separately from the system unit.

Connection

The broadcast can be launched in 3 SIMple steps:

  • Install the application on your PC or mobile device (indicated in the instructions);
  • Connect your capture card to HDMI source and to PC / mobile device;
  • Turn on HDMI source and run the app!

The HDMI source is now displayed on your screen.
Starting a webcast is as easy as connecting. see the instructions for more details!

Now you know how to connect any Smart device as a second monitor to any computer, as well as how to use smartphones, tablets and monoblocks as a screen for sources with an HDMI port.
For any questions you can contact us, contact information. https://besprovodnoe.ru/contacts/.

Due to the limited space on the desktop, there is a need to connect to iMac 27 (late 2012) a system unit with Windows 8 installed.
There is only one input to the iMac. thunderbolt. When connected to it, for example, a Macbook Air via a thunderbolt to thunderbolt cord and pressing Command F2 on the keyboard, the iMac does an excellent job of a monitor. Now we are trying to connect a system unit to the iMac that has 1) thunderbolt; 2) mini display port; 3) HDMI, DVI.
For reference: the motherboard is maximus V extreme from Asus on the Z77 chip (built-in VGA. Intel HD4000), the latest BIOS version is installed. video card. GTX690 from the same ASUS.
Go.
1. We connect to the iMac using a proprietary cable from Apple (thunderbolt-thinderbolt) the system unit via thunderbolt installed on the motherboard, boot computers.
Command F2. no reaction.
2. We connect the system unit to the iMac using a proprietary cable from Apple (thunderbolt-thinderbolt) via the mini display port on the video card, boot computers.
Command F2. no reaction.
3. We do what is indicated in paragraphs 1 and 2. but with the computers turned on.
Command F2. no reaction.
4. We enable LucidLogix Virtu MPV support in the BIOS, install drivers for Windows 8, do everything that is indicated in p.1, p.2, p.3
Command F2. no reaction.
I read that there are some Asus plans to release ThunderboltEX, which will be able to take a signal from the mini display port of the video card, and pass it to the thunderbolt on the motherboard.
Not found on sale. Considering that the built-in video chip Intel HD4000, which, in theory, should provide a picture via Thunderbolt, does not do this, I doubt that the device will allow you to connect the iMac 27 as a monitor.
In general, I shared my tests. I ask for advice on what else you can try. Surely there are already external devices that convert the signal from mini display port, DVI, HDMI to thunderbolt.
Or maybe I’m doing something wrong. Maybe you need to install some drivers?

How to use a laptop as a monitor?

Just connect with a cable? No, that won’t work. We tell you how to do it right.

An old laptop can always be used. For example, connect it as a second monitor on a PC (yes, you can also connect it to the main one) We will tell you about several ways to do it.

We use built-in utilities

If both computers are connected to the same Wi-Fi network, then you can connect the two devices using the Internet. Windows 10 has a screen projection feature that uses the Miracast standard. Therefore, first find out if your device supports this technology.

READ  Redmi 8 how to take a screenshot of the screen

To connect, follow these steps:

  • Right-click on the “Start” menu in the lower left corner of the screen and select “System”.
  • Further in the left menu find the section “Projecting to this computer”.
  • Adjust the parameters as you wish. For example, a PIN and the need to enter it every time you connect.
  • Then, on the desktop computer, press the WIN R key combination and enter the mstsc command.
  • In the field that appears, enter the name of the laptop.

You can read more about this method in our other article. Don’t be discouraged if you can’t connect the first time. Because there are so many factors that can hinder a successful connection. For example, firewall settings, antivirus software, disabled service, and so on.

We use remote control utilities

We can also recommend a universal method for all platforms. a remote control utility such as TeamViewer. In this case, it doesn’t matter at all what operating system you have and how you are connected to the Internet. And you don’t have to use the most popular product. You can use any analogue: AeroAdmin, AnyDesk, RemotePC and others.

In order to use the services of most of these programs, you will need to know the laptop ID and the specified password. Of course, the software must be installed on both computers. Also, many products are free, do not require additional configuration and are translated into Russian, which makes this method itself SIMple and convenient.

Why you can’t connect the monitor with a cable?

The vast majority of laptops are equipped with a video interface. This is usually VGA or DVA. You might think that it is enough to connect the computer and the corresponding connector with a cable. But this is not the case. Do not forget that such video interfaces are video OUTPUT, that is, the signal is broadcast FROM the laptop.

Only some premium models have video INPUTS that act as signal receivers. Some laptops also have a corresponding switch, which is located near the connector, but such chips are quite rare. Therefore, in most cases, you will not be able to transfer a picture from a PC to a laptop using a regular cable.

Is it possible to connect a Mac as a monitor?

For owners of Apple devices, a SIMilar function is also provided. It’s called Back to My Mac, which works through iCloud. Starting with macOS High Sierra, access to setting up a remote connection is carried out through the “Sharing” window.

Connecting a laptop to a PC using a cable

This method requires preparation. buying a cable if it is not there. To correctly determine the required cord, it is worth finding out the connectors of the devices. You can find devices with VGA, DP ports (for example, MSI GE62 2QF), HDMI, USB. Pay attention to this when choosing a cable.

Recommendations on how to properly connect a laptop to a computer using a cable:

  • One end of the cord must be inserted into the laptop connector, the other into the PC port.
  • Start both devices.
  • After the desktop appears on the screen, click on an empty space with the right mouse button.
  • In the menu that appears, select “Properties” or “Screen resolution” (depending on the OS), the display options will appear.
  • There will also be a list and pictures with monitors, you need to select the connected laptop monitor by name or click on the image under number 2.
  • In the field “Multiple screens” select “Show desktop on”.
  • To save all changes, click on “OK”.

How to use a laptop as a monitor for a computer: 3 ways to connect

If the PC screen is out of order, and there is no opportunity or time to purchase a new one, you can use the laptop as a monitor. Also, the option is suitable so as not to dispose of a non-working laptop, and still use it for some time.

An important nuance: the laptop display must be working.

The article provides detailed instructions on how to connect a laptop screen to a computer using a cable, program or video capture card. The methods are also useful if you need to demonstrate in all its “glory” information from a laptop on a large monitor.

May be interested in: What are the laptops?

Controlling a PC on a laptop via remote access programs

If you don’t have a cable at hand, you can use the wireless method to connect your laptop and PC. The method is relevant for owners of Apple devices. There is a special option called Air Display (not available in all versions of the devices, you may need to install the application).

The program is freely available, it can be easily downloaded from the Internet. To install, you just need to follow the instructions, everything is intuitive.

If the program is already on your laptop, then you can connect to the PC as follows:

  • select the program icon on the taskbar and click on it;
  • in the window that opens with a list of available devices, select the desired one;
  • click on Connect and wait for the connection.

That’s it, now you can display an image, text information from a computer to a laptop. Air Display helps to use monitors together, all actions are carried out as a remote connection.

Connecting with a video capture card

Another way is to purchase a USB video capture card. This will provide an opportunity to seamlessly use both a monitor and a keyboard in a laptop. The board is connected with one side to the PC, the other to the laptop.

You can work with the board from any device equipped with USB connectors. All drivers are included, so there will be no problems installing it. At the same time, the best option is to use a standard wired connection between a PC and a laptop, since this will require fewer resources.

The advice in this manual is very real and useful even for non-computer technicians. The first and third methods involve small additional expenses. buying a cable and a video capture card. The second method is optimal for owners of “apple” devices, there is no need to spend money, just install the application. The choice of the method of connecting a laptop to a PC is up to the user, who only has to study all 3 and choose the most convenient, fast and SIMple of them.

Can I use a candy bar as a monitor

Sometimes a person uses a candy bar for a while, and then buys a processor. And then he has a question: “Can I use it as a screen or do I need to buy a monitor?”.

What is monoblock

In SIMple words, this is a system unit and a monitor assembled in one case. It looks like a regular liquid crystal screen, but is somewhat thicker. It also houses various controls.

This type of personal computer has several advantages. It:

  • Compact size. We can say that its main advantage. In terms of size, it does not differ much from TVs of medium diagonals. At the same time, it has a full-fledged filling, like a full-fledged PC. Thanks to this, it takes up a minimum of space on the desktop, and if necessary, you don’t have to buy a special computer desk at all. Compact PC easy to fit on any surface.
  • Convenience. The device is self-sufficient. There is no need to connect the processor to the monitor, so the number of wires used is reduced. After all, a mouse and keyboard are enough for work. If desired, you can connect speakers, but the standard acoustics of monoblocks are usually of high quality.
  • Some models have a very user-friendly touch screen.
  • Almost silent operation.

The disadvantages include:

There is only one minus, but a big one. In terms of their characteristics, they are close to notebooks with average parameters. Since the design is quite compact, it does not allow placing ordinary components, and due to the close location of the matrix, the requirements for them are quite stringent. Everything should be small and have a low temperature during operation. It is impossible to improve them on your own.

Usually such devices are used for work by professional photographers and designers. High display characteristics and a rather powerful processor allow you to work with special programs that are rather “heavyweight”.

You can make a monitor from a monoblock

The first personal computers were huge in size and combined both display and hardware components. With the development of digital technologies, their size gradually decreased, and monitors began to be manufactured separately from the system unit.

How to connect a candy bar to a computer

To make the connection, you need an HDMI to HDMI cable. One end of the wire must be connected to the appropriate connector on the processor. The other end attaches to the monoblock. Connection is carried out exactly to the HDMI connector. Output.

Further, it is necessary to put the device into a mode in which it receives the incoming signal. As a rule, there is a corresponding button on its body.

By SIMple manipulations from the monoblock, you can make a full-fledged computer monitor.

How to enable AirPlay on MacBook Pro?

How to enable AirPlay on Mac to stream to Apple TV

2) Click the AirPlay icon on the menu bar. If you don’t have the icon, select the Apple icon System Preferences Monitors and check the box next to Show replay options in the menu bar, if available. 3) Now click on the AirPlay icon and select Apple TV.

How to cast screen from Mac to TV?

Duplicate or extend your Mac display

  • Connect your Mac to the same Wi-Fi network as your Apple TV or AirPlay 2-compatible smart TV.
  • On a Mac, click the icon in the menu bar at the top of the screen.
  • Select an Apple TV or an AirPlay 2-compatible Smart TV.

How to connect two Mac computers?

How to quickly transfer large files from Mac to Mac by organizing a local network

  • Connect both Macs with a Thunderbolt (FireWire) cable using the same-named connector (adapters may be needed).
  • On a Mac, open System Preferences, select the Network section and click on Thunderbolt Bridge with an arbitrary IP address.

Can I use a candy bar as a monitor?

The connection diagram is SIMple. we take an hdmi cable, insert one end into the system unit (HDMI-OUTPUT), insert the other end into a monoblock (HDMI-INPUT). It remains to switch the candy bar to the signal receiving mode, usually there is a button on the case, press it and the picture from the system unit is displayed on the screen of our All-in-One PC.

How to use a MacBook as a monitor?

Using extended desktop mode

  • Make sure the external monitor is turned on and connected to your Mac.
  • Choose Apple () System Preferences, then click Displays.
  • Go to the “Location” tab.
  • Make sure the Enable Monitor Mirroring checkbox is unchecked.
READ  Can I Clean The Monitor With Alcohol

How to play PS 4 on Mac?

How to play PlayStation 4 via Mac

  • Download the Remote Play app from here.
  • After installation, log into the PS Network.
  • Connect both devices to the same Wi-Fi network
  • Then you can either independently “pair” the devices, or provide this to the machine (it usually copes).
  • Launch the application and connect the controller to the laptop (via cable)
  • Click Start.

Can PlayStation 4 be connected to a laptop?

Connecting PlayStation 4 to laptop or monitor using HDMI cable

  • Connect the HDMI cable to the corresponding connector on the back of the PlayStation 4.
  • Connect the other end of the wire to the HDMI connector on the laptop.
  • Start both devices.
  • To transmit sound, you need to connect headphones or speakers to the console.

Can PlayStation 4 be connected to a computer?

On PlayStation 4, select [Settings] [Remote Play Connection Settings] [Add Device].
.

  • Click on the link to download the installation file [PlayStation 4 Remote Play].
  • Run the installer and follow the instructions on the screen.
  • Connect controller to PC or Mac.

Can a Mac be used as a monitor?

iMac as external display

You can use your iMac as a monitor using TDM (Target Display Mode). This feature is supported by the previous generation 27 ”iMac (Thick) and all new iMacs with Thunderbolt.

How to watch TV channels from the monitor?

To use the monitor as a TV, it is enough to acquire TV tuner. It can be connected via VGA connector and enjoy the available TV channels. If you don’t want to spend money on a new device, you can SIMply replace one single card with a video signal decoder.

In fact, this can be more difficult than in words. So if you are not particularly strong in technology, take the monitor to the specialists, they will replace anything for a modest fee.

Some are still just wondering if the monitor can be used as a TV, while others are already enjoying their savings. It is better not to resort to experiments with technology if you are not sure that you can return everything “as it was before.”.

In an attempt to save money on the purchase of household appliances, many wondered whether the monitor can be used as a TV without additional costs? Given the current for equipment, the question is more than relevant. And why spend money on buying a separate TV in the garage or in the kitchen when you can use an old monitor standing idle?

How to use a laptop as a monitor?

You can connect a laptop to a monitor using it in a SIMilar way. Directly connecting it to the system unit, bypassing the monitor, will not work. There are two options:

For the lazy

Most likely you will be able to use only the VGA connector.

Download any remote control software.

It is enough to find a suitable cable and connect it to the screen.

Run it on both devices and enter the required data.

In “Screen Resolution” select the primary and secondary monitor.

Enjoy the same picture and control. (need internet access)

But in both moments there are nuances:

  • By connecting the cable, we, by and large, bypass the system unit. It turns out that not the laptop is connected to the computer, but the screen to the laptop. And we can only use the data that is on the hard drive of the laptop.
  • In the second case, you can face even more problems. You cannot run a program without a working monitor. They sync over the internet, so both devices must have a stable network connection.
  • It is not possible to connect a laptop directly to a personal computer. In essence, it would be a union of two autonomous systems.

How to use a TV as a monitor?

Plasma TV hanging on the wall for several years can be used as a monitor:

  • It is enough to inspect it for the necessary connectors.
  • Standard VGA or HDMI will do, these two ports are found on almost every modern TV and on every video card.
  • It remains to find a cable with which you can connect the system unit and plasma.
  • The system does not require installation of drivers or anything like that.
  • If the TV is connected in parallel with the monitor, you should pay a little attention to the settings.
  • In screen resolutions, everything is intuitive. choose a monitor, adjust the resolution and make it the main one.

Now you can display any image on the big screen. Some retro games will look especially epic at this resolution. To turn off the plasma, just remove the cable and you can watch your favorite TV channels again.

Information Security

Today, a person’s entire life is “believed” around information flows:

  • Data can be obtained SIMply by turning on the TV.
  • Information comes in an endless stream from the Internet, from news sites.
  • Printed editions have receded into the background and create only background “information noise”.
  • Even grandmothers at the entrance are not discussing for vegetables, but geopolitical problems.

The rapid change in environmental conditions forces a person to adapt to changes. And what to do when these changes happen ten times a day, with new news from all over the world? The body is not adapted to such emotional stress, our ancestors learned about all the changes with a great delay and were rarely interested in events on the other side of the globe. And we constantly have to do this in order to “keep our nose downwind”.

There is only one way out of the situation: do not take everything to heart, isolate yourself from the endless stream of data and give your consciousness an opportunity to take a break from all this cycle for at least a couple of weeks.

Monitor as a TV

The most difficult moment is using an ordinary monitor as a TV. Take the time to see if you bought a monitor with a built-in video decoder. The probability of this event is not so high, but it is.

It is best to bring it to your friends in the service along with a new board and pay for the work of specialists. The very next day it will be possible to pick up your now TV. And it will cost much less than buying a new plasma.

  • The monitor can still be connected to the system unit through the connectors.
  • An antenna or cable can be used to watch TV channels.
  • The picture quality depends on the screen resolution.

Video tutorial: making a TV from a monitor

In this video, Timur Bogomolov will show and explain in detail how he made a full-fledged color TV out of a monitor:

Which is more convenient, a monitor or a TV

Depends on financial capabilities and purposes of application. If you buy a computer monitor with a large display, then the use of a TV as a computer monitor immediately disappears. It is expensive.

A monitor is suitable for working with graphic pictures. TV does not convey the fidelity required for such delicate work. When working with browsers on the Internet, it is better not to use a TV.

  • First, the TV set is not always adaptive.
  • Secondly, the graphics will look ridiculous on the big screen.

Convenience is an important factor. Especially if you have to spend more than 8 hours on a PC. Doing this on the TV is uncomfortable, fatigue overpowers literally in the first half of the day.

We evaluate the positive and negative sides of the TV as a monitor.

The big screen is the dream of gamers, because you can plunge into the gaming world much deeper. But, it is worth considering such a technical feature as Input Lag. This is the delay in displaying images for a certain period of time.

The cursor when moving the gaming mouse on a PC instantly follows your movements, unlike TV, where the action takes place with slowdown. If on a physical level this is not so noticeable, then it affects inveterate players. The indicator is measured in milliseconds (ms), for a comfortable game. no more than 40 ms. It is important to consider these nuances first of all. Everything else is secondary.

What TVs can be connected to a computer

One way or another, but not every TV screen will serve as a computer monitor. It all depends on the resolution of the TV. Large diagonal and small resolution promises to show coarse-grained “pictures”. Standard TV models have twice as many pixels as monitors. A good option would be 1920 × 1080 pixel resolution. But, this is not the limit. The larger the diagonal, the larger the pixel should be.

Whether a TV can be used instead of a monitor depends on the user’s needs. A 32-inch diagonal is enough to work with office applications, browsers on the Internet. You can play games and watch videos on a diagonal of 36 ″ and above.

Connecting a TV to a Computer

It’s SIMple. The only nuance can be in the absence of suitable connectors on both devices. But this task is fixable.

How to connect a TV instead of a monitor? Via cable or Wi-Fi.

  • HDMI and DisplayPort cables provide a high-quality display of pictures in Full HD quality and excellent sound, without additional connections.
  • But VGA, DVI should be used in the absence of the above plugs. Why? Read below.

On the topic: 5 effective ways to connect a TV monitor to a PC

The easiest and most common connection method. There may be several such connectors on the TV set. One cable carries high quality audio and picture. No other cables are needed, provided that the TV and video card are equipped with this port.

Using DVI and VGA

DVI transmits a high quality picture. But, you can’t do without an audio wire.

Let’s analyze three variants of DVI-cable in the table:

Unlike the modernized DVI, VGA is a legacy interface. Only “pictures” are not of the best quality. It will not display the picture in HD format. In addition, you need to use a cable (RGA) or “minijack” (3.5 Jack) to transfer the audio signal. Modern TV models are not equipped with it. Both devices must be off to connect.

The TV does not have DVI-I, but there is a PC video card. connecting devices to help. Options: DVI — VGA or DVI — HDMI.

“Disadvantages” of cords. fastening connection of the socket. If caught on the cord, damage to both devices cannot be avoided.

DisplayPort

Transmits image, video content and audio signals as packets. Provides high quality transmission without the help of other devices. Sound or video can be transmitted separately. The difference from HDMI is the application. Despite the fact that the latter can be synchronized with a PC, its main purpose is multimedia equipment.

The adapter will help you sync the cord to your DisplayPort source and VGA display. Or connect to 1 channel DVI or HDMI display.

READ  How to remove the black bar on the right monitor

Undeniably a better option than a cord. There is no need to place the system unit near the TV due to the short cable length. This affects the attractive appearance of the room without a lot of hanging cords.

“Minus”. depends on the net speed. It connects if the Internet is at least 30 Mbps. Wireless sync in three ways:

  • via Wi-Fi adapter (external). For TV sets without a general Wi-Fi adapter;
  • via DLNA. For home LAN. On the PC, connect network discovery and file sharing. To activate, go to the “Network and Sharing Center”. In the TV menu, click on the wireless connection;
  • via WiDi software (Miracast). It is a home media server for conveniently dubbing content playbacks to external devices via Wi-Fi.

TV as a monitor. can I use: 4 steps to connect

A TV monitor instead of a computer monitor. yes, you can! Video content, gaming, presentations. all this is more spectacular to look at on large screens. There are drawbacks in operation. But this is nothing compared to what opportunities open up to the user.

Setting up the TV after connecting to a computer

You will need a remote control. Press the “Source” or “Input” button on it. Further setup on PC:

  • On Windows 7 and later, press WindowsP to open the Project menu. For other versions. on the PC desktop, right-click and select “Properties”.
  • Decide in what form the “pictures” will be displayed. in our case it is “Computer”.
  • If necessary, enter the screen resolution in the corresponding window using the slider.

Can the TV be used as a computer monitor? Yes. But the aspects to be judged can change your mind. Consider the degree of need and the technical parameters of the TV. Having found this out, there will be no difficulties with synchronization.

Monoblocks with IPS matrix (matte / glossy)

List of all-in-one computers with IPS-matrices, indicating the type of coating (matte / glossy) and other screen characteristics.

Monoblock model Matrix type Resolution Diagonal Coverage
HP EliteOne 800 All-in-One IPS 1920 x 1080 23 ” matt
HP ProOne 600 G1 All-in-One IPS 1920 x 1080 21.5 ” matt
Acer Aspire Z3-615 IPS 1920 x 1080 23 ” glossy
Lenovo ThinkCentre All-In-One M93z IPS 1920 x 1080 23 ” matt
Lenovo ThinkCentre M92z IPS 1920 x 1080 23 ” there is no data
Apple iMac 21.5 IPS 1920 x 1080 21.5 ” glossy
Apple iMac 27 IPS 2560×1440 27 ” glossy
Lenovo B50 IPS 1920 x 1080 23.8 ” glossy
Lenovo B750 IPS 2560×1080 29 ” glossy
HP ENVY Beats Special Edition IPS 1920 x 1080 23 ” glossy
HP ENVY Beats Special Edition IPS 1920 x 1080 23 ” there is no data
ASUS All-in-One PC ET2322INTH IPS 1920 x 1080 23 ” glossy
Dell Inspiron 23 5348 IPS 1920 x 1080 23 ” matt

Monoblock display does not turn on, possible reasons

All-in-one display does not turn on. black screen, but at the same time the computer is running, the noise of the fans is heard, the lights are on, the disks are spinning, this is how you can describe the malfunction of the monoblock computer display. There can be many reasons, consider the most possible of them.

  • Problems are related to the operation of the computer’s video card, the video card does not work correctly, for example, the power cable has come off or the card has partially crawled out of the slot or does not work at all. Try replacing it with a new or proven working one.
  • Perhaps it is a failure or incorrect operation of the computer BIOS. To solve the problem, you should perform the BIOS reset procedure, usually to do this, you must press a certain key combination at boot. Each manufacturer may have its own settings for this function, take an interest on the official websites of the companies.
  • Another possible reason. the wire from the video card to the monoblock monitor has moved away, so whether or not it can be determined only visually, disassembling the monoblock and carefully inspect the wires.
  • And the most unpleasant reason for the breakdown. the matrix control electronics broke down, roughly speaking, the screen itself was covered, something happened to the matrix, then only carry it for repair to replace the microcircuits, maybe they will help.
  • It also happens that the monoblock shows a white screen, there may be a bad contact of the loop or its complete malfunction, or the matter is in the matrix control electronics.

Which type of screen is better?

The best picture quality and viewing angles will be the screen on the IPS-matrix, when viewed from above and from below at an angle, the colors are not distorted, only the contrast drops slightly, the black color looks deep, dark, white also has no extraneous shades. On matrices of a different type of PVA or MVA, you can also achieve almost the same quality as on IPS matrices. SIMpler screens lose contrast and vividness of the picture at large viewing angles, but on the other hand, we look at the screen almost always directly, in this case the picture is good, and the price of monoblocks with these types of matrices is lower. Here it is worth considering whether it is worth overpaying?

Usually, the characteristics of a monoblock do not indicate the type of matrix and its quality can be determined only by eye or in comparison with other devices that have known screen parameters, such as monitors or laptops. Also, screens are glossy and matte, the first ones give glare from lighting, especially in the sun, matte ones do not glare, but they are much less common than glossy ones, for some reason manufacturers mainly produce monoblocks with gloss, the reason remains a mystery. If you have a choice, of course take a candy bar with a matte screen.

Use the all-in-one as a monitor

In some cases, for example, connecting a game console, system unit, laptop or just need a second monitor, it becomes necessary to use a monoblock computer as a monitor, the question arises whether AIO can work as a display and, if so, how to do it?

Yes, you can connect the candy bar as a monitor if the candy bar has HDMI-IN. The connection diagram using an hdmi cable is elementary: the cable from the system unit comes out of the HDMI-OUTPUT port and is connected on the monoblock to the HDMI-IN port. Next, the All-in-One PC is switched to the signal receiver mode, there must be a special button or setting. And that’s it, you can enjoy the picture from an external source, SIMply and easily!

Make sure the monoblock has an HDMI-IN port, otherwise you won’t be able to connect it as a monitor

Just remember that the monoblock will consume electricity the same way, that is, much more than a monitor of comparable size and it is at least impractical to use a full-fledged computer as a monitor.

What is a touch screen for?

First of all, the sensor. is an interface control tool, many operations have been SIMplified or reduced in number of actions thanks to touch control. Touch control is convenient and visual, intuitive, it became easier to manage programs, more multimedia capabilities appeared.

For the gaming industry, the touch screen is just a godsend, new directions and types of games, greater immersion in the gameplay, greater interactivity. So far there are not so many games for the sensor, but active work in this direction is undoubtedly carried out.

Touch game

How to enable / disable the touch screen on a monoblock

There are situations when it is necessary to turn off the sensor on the monoblock screen, how to do this, see the instructions below.

In order to disable the touch screen, we will use the standard settings in windows. Click Start Control Panel Click Browse By Category Pen and Touch. In the dialog box that opens, select the Tangency tab. To disable the touch screen, uncheck “Use your finger as an input device”, to enable, tick the same item and click “OK” to confirm with saving the operation.

Pen and touch

Use your finger as an input device

Unfortunately in Windows 8 there is no setting to disable the touchscreen, but you can disable it in another way. Go to Device Manager, HID Devices, HID-Compliant Touchscreen, right-click and select Disable. In the dialog box with a question about disconnecting, select “Yes”.

HID compliant touch screen, disable

Thus, you can disable or enable the touch screen not only on the all-in-one, but also on other devices running Windows, such as laptops with a touch screen or tablets.

Monoblock touch screens. types, settings, faults

Monoblock computer screen. this is one of its main advantages. All-in-one PC screens range in size from 15 to an impressive 27 inches, and are able to meet the needs of any user. If you are looking for an all-in-one for entertainment and gaming, screen size and quality are critical, then powerful all-in-one gaming cones with large screens and high-performance panels are your ideal candidate. For business and unassuming users, machines with screens of medium diagonal (17-20 inches) and medium parameters of matrices are suitable, you do not need to overpay for what you do not need and there is still not much difference by eye.

Synthesizer on the monoblock computer screen, let’s play?

Large touch screen. this is what makes all-in-one computers stand out from other large electronics, and while the touch screen in mobile devices has become a common thing for us, for large screens touch technology is new. Other names used to refer to the touch screen: Touch Screen, Touch Panel, touch panel.

Cleaning the screen and body of the monoblock

Cleaning the monoblock computer screen, like the entire AIO PC as a whole, should be carried out regularly. Since the accessories of the candy bar are packed in a small space, in such a cramped situation with dust pollution, problems with cooling the candy bar may begin, the processor and video card may overheat, the monoblock screen will also heat up, which can lead to unstable operation and even breakdown.

Cleaning the case can be divided into two stages, the first. This is a regular quick cleaning, just vacuum all holes and crevices, trying to suck out as much as possible. Second. general cleaning, disassemble the back cover of the monoblock and also vacuum everything thoroughly, you do not need to do this often, once every six months or a year. And do not forget to wipe in both cases with a damp cloth.

BICBON.COM 2021