Error 4005 when restoring iPhone 5s

Errors preventing the firmware update and how to fix them

Sometimes, for various reasons, it is not possible to complete the process of flashing the phone due to errors, each of which has its own code. 50, 47, 14, 3194, 4005, 4013, 4014, etc. Consider the error codes, as a result of which they arise and how to fix them.

error, 4005, restoring, iphone

Error 50 occurs due to the lack of response to the application from the server. At number 50, it occurs not only during the firmware, but also when downloading any content from the iTunes Store. Usually the cause of the occurrence is antivirus software settings.

To resolve the issue when Code 50 appears, do the following:

  • Sign out and sign back into your iTunes account;
  • Disable all anti-virus applications;
  • Try to download iOS again for the device;
  • To solve the problem with the appearance of fault 50, you can also try to uninstall iTunes and reinstall it.

Not always doing these steps leads to the fact that the code 50 stops interfering with the phone update. Sometimes the 50th error is a consequence of the actions of viruses that delete files associated with iTunes. Therefore, if there is no result, scan your PC for viruses and get rid of them if found.

Sometimes error 50 disappears after cleaning the system from garbage (temporary folders and files) with the appropriate software, when updating the drivers. You can check the OS system files with the sfc / scannow command (in the Run window field, run as administrator). this way important Windows data can be returned, including those associated with the appearance of code 50.

Error 3014 occurs when there is not enough free space on the HDD while performing an update. Firmware takes up a lot of space during the upgrade, so error 3014 is often resolved by freeing up disk space. To do this, simply remove unnecessary music and movies, trash, etc.

Perhaps when Error 47 appears, you are dealing with a hardware problem with the IMEI storage chip. This is even more indicated by the lack of information about the firmware version of the modem and IMEI in the “About device” section. Code 47 also appears when moisture gets into the modem. A serious case. they can get rid of 7 only in the service by replacing the microcircuit.

Sometimes Windows itself throws Error 47, although it seems that it is an iTunes error. This is due to the fact that the OS cannot use the device, since it is prepared for safe shutdown, but it has not yet been disconnected from the computer. Then, to eliminate failure 47, it is enough to remove the device from the socket and reconnect.

Error 14 may prevent you from resetting the settings and updating your phone for several reasons. First, Code 14 will cause the crash due to corrupted firmware files. Often, error 14 occurs when trying to install a non-original iOS on an iPhone. Solving problem 14 during installation. download the archive again from the support site.

The 14th error often occurs due to problems with the equipment, in particular with the USB port or the cable itself. To fix 4, it will be enough to replace the cable or connect the iOS update gadget to a different port. Sometimes the problem also occurs due to false positives of the antivirus. change the settings or disable applications. error 14 may disappear.

In the simplest case, code 3194 indicates that the version of iTunes with which you are trying to flash the iPhone 5S is outdated. To eliminate Error 3194 in this case, it is enough to reinstall this software on the computer.

Also, the appearance of code 3194 during the update indicates that the Apple server does not have SHSH hashes for this firmware together with your gadget. Therefore, you cannot switch to this version of iOS. error 3194 is eliminated after downloading the current version of the OS for the gadget.

You can also try to delete the data 74.208.105.171 gs.Apple.com from the hosts file. The file is located:

  • C: \ Windows \ System32 \ drivers \ etc \ hosts (Windows);
  • / etc / hosts. (Mac OS).

Attempt to disable security software to remove code 3194. In iPhone 5S, malfunction 3194 also occurs when trying to rollback to the old version of the OS. in modern iOS, such a Downgrade is impossible.

The device generates code 4005 when a critical failure occurs while updating the device. It can occur in Recovery mode. Therefore, so that Error 4005 does not interfere with the recovery process for any systemic reasons, run it in DFU mode. Try using a different USB cable as well. Also, sometimes disabling the antivirus helps to eliminate the error 4005 during the update.

Problem 4005 may also be the result of not the most recent software versions. Try downloading the latest firmware, reinstall iTunes, and then flash your phone in DFU mode. As a last resort, try to avoid crash 4005 by transferring work to another computer with iTunes. If this does not help, error 4005 is probably the result of hardware problems that can only be fixed in the service.

Ways to restore the device to work

The iPhone can occasionally experience various kinds of problems. glitches appear, the phone does not respond to button presses, or the wait is too long. Recovery methods in these cases may differ, however, if the problem is serious, often when using “softer” methods of resetting the parameters, failures 47, 14, 4014,4013, 4005, 3194, etc.

Update in DFU mode bypassing iOS phone

Unlike the one discussed above, updating in this mode will destroy user information on the iPhone 5S, so it is advisable to make a backup before performing it. But such a reinstallation of the OS often helps to avoid crashes with codes 50, 47, 14, 3014, 3194, 4005, 4013, 4014, etc. Do not forget to download the latest version of iOS for your phone through the Apple support site. For this:

  • go to http://www.getios.com/ and select the name of your device in the appropriate field;
  • specify the device model in the The Model drop-down list;
  • select the iOS version (for iPhone 5S, it cannot be lower than the seventh);
  • click Download and get ready to download a file weighing several gigabytes.

The update itself is done as follows:

  • Connect your device to your computer via USB cable.
  • Put the gadget in DFU mode by performing the following settings:

○ hold down the Power and Home buttons;

○ after the screen turns off, release the Power key while continuing to hold Home (the wait will take 10 seconds);

○ if the login to DFU was performed correctly, the computer will notify you through iTunes that the device is in the appropriate mode, while it itself will remain turned off, nothing should be displayed on the display.

  • After iTunes detects the device, hold down Shift and click on the restore button.
  • Specify the directory with the previously downloaded iOS version.
  • After the end of the firmware, the program will offer to return the archived user data from the backup.

If there is no backup, you just have to disconnect the device from the computer. It should be noted that updating the device in DFU mode by formatting the memory and installing the OS in its cleared area is more correct, while failures 47, 3194, 4005, etc. occur quite rarely. Therefore, in case of serious problems, if the gadget is frozen and the usual methods do not help, you need to restore it through DFU.

2005, 2009

Codes 2005 and 2009 usually indicate data cable problems. To be able to reflash the device and avoid crashes in 2005 and 2009, disconnect USB devices on the PC, leaving only the keyboard and mouse and the gadget itself. Perform recovery again.

If the problems with the appearance of Error 2005 and 2009 still persist, try disabling your antivirus applications and scan your PC system files for damage.

Soft Reset

When the gadget is frozen, sometimes you can bring it out of this state through a reboot:

  • Press and hold the Power and Home buttons at the same time for about 10 seconds;
  • After the “apple” logo appears, release the keys.

It is possible that glitches in the iPhone 5S will disappear after that.

Parameter reset sequence

The sequence of actions when restarting iPhone 5S in Recovery mode is as follows:

  • Turn off your phone.
  • Hold the Home key on the device and connect it via the USB cable, while continuing to hold Home.
  • Release the key only after the iPhone 5S displays the iTunes logo and USB cable.
  • As soon as you stop holding the button on the phone, a message about successful connection will be displayed.
  • In the iTunes window on your computer, click on the restore button.

The process will go automatically. After a maximum of 3 minutes, you will receive the corrected settings and saved user information.

How to fix errors while recovering Iphone 5s

IPhone 5S functionality and settings can be seriously impaired due to incorrect installation of applications. Often, if the phone freezes, the only solution to get the device back to work from Apple is to carry out the standard recovery procedure. We will describe how to independently completely return the previous functionality to the “apple” device.

We use standard Recovery Mode

Make sure you are ready to reset in Recovery mode:

If all the preparations are done, you can restore your iPhone 5S.

Error 4005 when restoring iPhone 5S: solving the problem by restarting your phone

This is the first way to quickly bring your phone to life. It is considered quite safe, since in this case you do not have to worry about the fact that data from the device may be irretrievably lost.

In order to fix error 4005 when restoring iPhone 5S, you must first restart the PC on which iTunes is installed, and then do the same with the iPhone itself. If you do not need to perform any complex manipulations to restart the computer, then things are different with a smartphone.

READ  How to set up Apple Watch 3 with iPhone

In this case, a forced restart is required. To execute it, you need to press the “on / off” button on the smartphone, while holding “Home” at the same time, and wait 10-12 seconds until the device turns off on its own. Next, you just need to wait until the phone is fully loaded and try to reinstall the updates for iTunes.

It did not help? Still showing error 4005 when restoring iPhone 5S? The solution to the problem may be different.

DFU recovery

This method is rather complicated, since in this case you will have to first copy all the necessary files and folders from the phone. This mode is considered emergency, therefore it is activated in the most desperate situations.

To turn on DFU, you need to turn off your phone and connect it to your PC using a USB cable. After that, you need to activate iTunes on your computer.

At the next stage, you need to press the button on the smartphone that is responsible for turning on the device for 3 seconds and, without releasing it, additionally press the “Home” button. In this position, you need to hold the buttons for about 10 seconds. After that, you can release the power key. However, the Home button must remain pressed until the phone detects iTunes software.

After that, a dialog box should pop up on the monitor in which the user will be prompted to activate the system restore process.

Replacing the USB cable

Quite often, such troubles are caused by the fact that the user is using a non-original or non-working cable. In this case, it is recommended that you replace the wire with one that has been certified by Apple.

Error 4005 when restoring iPhone 5S: how to fix

Most owners of modern gadgets are often faced with the fact that any communication device fails for no apparent reason. This problem was not on the side of Bosch and the owners of “apple” products. If error 4005 appears on the screen when restoring iPhone 5S, then this may indicate a variety of malfunctions. However, more often than not, the problem lies with iTunes. It is possible that the owner of the phone tried to reflash the device on his own or simply damaged the gadget. Also, water that got into the smartphone could lead to such malfunctions.

However, the most common error 4005 when restoring iPhone 5S occurs when trying to update iTunes. Let’s consider the most effective options for fixing it. If none of them turns out to be effective, then the only chance to restore the device to work. contact the master.

ITunes update

If the software on the phone is outdated, then this may well lead to similar troubles. Therefore, to fix error 4005 when restoring iPhone 5S, you should check the iTunes version and re-download the program if necessary. To do this, it is recommended to use only the official website of the manufacturer.

If all else fails, what to do?

You can try to fix error 4005 when restoring iPhone 5s by completely reinstalling iTunes. To do this, you must first turn on your computer and find all the installed “iTunes” files in it. After removing these components, make sure that there is no residual data on the PC and reboot the device. At the next stage, just go to the official Apple website and re-download the software.

If none of this helped, then most likely the problem lies not in the software part. In this case, it is necessary to repair the device itself. In the service center, such procedures are carried out only after detailed diagnostics, so it is worth preparing for impressive financial costs. If it turns out that the phone is not working due to mechanical damage, then the repair will be most difficult. Therefore, it is better to take care of your beloved iPhone and do not try to reflash it yourself, as this can also lead to serious malfunctions.

Error 4005 when restoring and updating iPhone

Most often, the owners of the iPhone 4S contact the service centers for the repair of smartphones, who complain about problems with the firmware. As a result, the irreplaceable gadget either does not turn on at all, or an error appears on the screen. Often, such breakdowns can lead to not the most pleasant consequences: the loss of all personal data or the complete failure of the phone (in this case, restoring the iPhone is impossible).

There are many reasons for such troubles. It is possible that there was a download error or the user tried to install third-party software on the smartphone. Also, a fairly common cause of breakdown is a hardware malfunction, which can be caused by mechanical damage or moisture penetration into the iPhone 4S case.

However, this does not mean that in order to “reanimate” a smartphone, you need to spend money on expensive diagnostics. There is a chance to fix your phone yourself.

So, most often users are faced with an unknown error 4005. Let’s consider the probable reasons for the appearance of such an inscription and methods for solving the problem.

Problems connecting iPhone via USB

Error 4005 may be caused by a problem with the USB cable. This is also evidenced by codes 9, 13, 1600, 1643 and others. In this situation, the most logical solution would be to change the wire. If, however, reconnecting does not solve the problem, then it is necessary to check the settings of the antivirus programs, it is possible that they prohibit the connection of third-party cables. It is also recommended to restart the iPhone and disable the firewall and firewall for a while.

iTunes update

If an old version of the media player is installed on the smartphone, then this may well lead to similar problems. To solve them, you need to check iTunes for available updates. If they are, then you need to install them. However, it should be borne in mind that you can download any software only from the official website of the device manufacturer, in this case we are talking about Apple.

reinstalling iTunes

If even after the procedure for updating the media player, error 4005 continues to flaunt on the screen, then this may be caused by communication failures. The only solution in this situation is to completely reinstall iTunes. To do this, you must first completely remove the program from the phone. over, you need to capture not only the “media combine”, but also other components of Apple. This will help additional utilities that allow you to remove the entire software.

After that, you can reinstall iTunes.

Synchronization problems

Quite often, error 4005 occurs while syncing iPhone, iTunes and computer. This is due to the fact that during the download of the data package, some of the necessary files are lost, and the software is not completely updated.

In this situation, there is no need to panic, since such a problem is considered the simplest one, which any user can cope with. The first thing to understand is that iTunes and iPhone were developed by the same company, respectively, such failures cannot lead to irreparable consequences in the form of a significant malfunction of the device. Don’t blame the developers either. IT technology is a collection of functions that need to be implemented in a tiny device. Therefore, such failures are quite normal costs. If there is error 4005 on the iPhone screen, then you can perform a few simple manipulations that will help restore iPhone without losing data.

Security bugs

Cell phones, as well as laptops and tablets, are very often installed with anti-virus programs, firewalls, firewalls and other utilities necessary to protect user data. However, when flashing or restoring the iPhone, this software may perceive manipulations with the phone as an attempt to load virus software into it. In this case, very often various errors appear on the screen (4013, 9, 4005 and others), indicating a communication failure. To avoid troubles, it is necessary to disable all programs of this type during the device update.

reboot

Before seeking qualified help, it is worth trying the simplest method of solving most problems. If an error occurs while synchronizing multiple devices, you need to restart both the iPhone itself and the PC. Typically, computers restart on their own, and the iPhone has to be turned off and on forcibly. To do this, you must simultaneously hold down the power button and the “Home” key and wait about 10-15 seconds. After this time, a sharp shutdown of the smartphone should occur. After that, you just need to wait until the device is fully loaded and check if the 4005 error has disappeared.

If the problem persists, then it’s time for more serious action.

Restarting devices

The first solution that comes to mind when any crashes occur is to reboot. In most cases, software errors are temporary, and after a full reboot, everything returns to correct operation. How to do:

In models where a large button is not provided, which is responsible for going to the main menu and unlocking, only the “Side button” is used.

Reinstall iTunes

iTunes shows an unknown error 4013 when restoring the iPhone. which means you need to reinstall the program, after checking the official website for updates. How to reinstall:

  • we start the program, in the upper part we find the “Help” tab;
  • click on the “Updates” item and start the search process;
  • if there are updates, a window will be displayed;
  • press the update confirmation and start the process;
  • after completion, the program will restart on its own.
READ  How to remove payment information on iPhone

You can also download the program from the official website.

Replacing the USB cable

A USB cable is a wounded part of the package of any gadget. With active use, contacts are broken and data is not transferred correctly, and frequent disconnections can occur, which leads to errors. Replace accessories only with original ones.

If you have any questions or complaints. let us know

Using cold

Exposure to low temperatures. an extreme life hack will get rid of the error. The gadget is pre-turned off and put into the freezer in an airtight bag. The residence time in the freezer is 15 minutes. Then it is taken out of the refrigerator and left at room temperature. After acquiring normal temperature, it connects to the PC and turns on. The error should disappear, otherwise you should contact the service.

Connecting to a different USB port

It is not uncommon for high-speed data ports to stop working correctly during the upgrade process. Fixes the situation by switching to a working port and retrying.

Error 4013 when restoring iPhone 4S, 5S, SE, 6, 7, 8, X via iTunes: reasons and what to do?

Error 4013 when restoring iPhone 4s, 5s, SE, 6, 7, 8, X is direct evidence of mechanical damage to the gadget. Occurs on machines that have been repaired due to shock and moisture. In our article we will tell you about the problem and how to fix it.

Error 4013 when restoring iPhone 4s, 5s, SE, 6, 7, 8, X: red screen and restart

The iPhone could not be restored “error 4013” and a red screen and restart indicates a problem with contacts. One of the recovery methods is strong heating or cooling of the gadget for a period of 30-40 minutes. To carry out the work, you will need a professional soldering station and special skills.

ITunes error classification

  • Communication Problems (Network Errors)
    ITunes Errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200.
    Also, notifications may appear:
  • “An error occurred while downloading the software”.
  • “The device is not supported for the requested build”.

These errors and warnings appear when there is a problem connecting your computer to an Apple update server or device.

  • Problems with security software settings (firewall, antivirus, firewall)
    ITunes Errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844.
    These errors are caused by antivirus, Windows firewall, or firewall blocking the connection to Apple servers.
  • Problems with the USB connection of the device
    ITunes Errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, 4016, Invalid Answer, Retry Request to recover after its completion.
  • Hardware problems
    ITunes Errors: (-1), 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 53, 56, 1002, 1004, 1011, 1012, 1014, 1667 or 1669.
    Occurs in case of hardware malfunctions with the iPhone, iPad and iPod Touch: with a modem, with a Wi-Fi module, a power connector, a battery, and so on.
  • ITunes errors when restoring, updating and syncing iPhone, iPod Touch and iPad (error codes, causes and remedies)

    Sometimes, when restoring, updating and syncing iPhone, iPod Touch and iPad, unknown errors appear in iTunes, and you cannot perform the necessary actions with the iOS device. In our guide, you will find the error decryption and possible solutions.

    Errors that occur during the recovery / update and synchronization process can be both software and hardware-related problems in the iPhone, iPod Touch and iPad: some are easy to fix (restarting the computer or changing the USB port), others require hardware repair.

    Common ways to fix errors in iTunes

    Most of the errors in iTunes can be fixed by yourself:

    • Remove or terminate programs on your computer that may be blocking iTunes from connecting to Apple’s update server.
    • Disable security software while restoring or updating iPhone and iPad.
    • Use an original USB cable to connect iOS devices to your computer. Otherwise, this is possible. Try to replace it.
    • Connect your device to a different USB port. On a stationary computer, use the USB ports located on the motherboard. It is not recommended to connect an iPhone or iPad to the USB ports on the multimedia keyboard, USB hub or on the front panel of the system unit. errors may occur when connecting the device.
    • Completely uninstall iTunes and all its components using the “Aninstaller”, Uninstall Tool (for Windows), for example. Then install the latest version of the program.
    • Restore / Refresh iPhone / iPad on Another Windows or Mac Computer.

    The table below deciphers all known iTunes error codes when restoring, updating, syncing, and downloading content from the iTunes Store, and provides possible solutions.

    Iphone 5s Stuck on apple Logo error 4013 ,error 9 ,error 4005,error 4013 or 4014 By NG

    Last data update: September 29, 2015

    Changelog: 09/29/2015. Added “Standard methods for troubleshooting errors in iTunes”, updated information and added useful links.

    ITunes error guide and how to fix them

    Error number Most likely cause Recommended solutionError number Most likely cause Recommended solution
    oneThe firmware is not supported by the device or the iTunes version is out of dateMake sure you are using the firmware for your device model and update iTunes
    2The firmware is recognized, but assembled and packaged incorrectly and therefore cannot be used. Occurs when working with custom firmwares with hacking and unlocking in which bad ASR Patch is used (The problem is relevant for Sn0wBreeze versions below 1.7)Use a different firmware
    3Problem in the operation of the modem part of the deviceContact an Authorized Service Center
    fouriTunes cannot connect to Apple service serversThird-party software may be blocking ports on your computer and preventing iTunes from connecting to Apple servers.
    Check the settings in the hosts file in / Windows / system32 / drivers / etc / for entries like “xx.xxx.xx.xxx gs.Apple.com”. If the line is present, place a # sign in front of it and save the changes. Try again
    5, 6It is impossible to install the firmware due to damaged boot logos, or because the device is turned on in the wrong service mode (for example, if the firmware is designed for DFU Mode, and you are trying to recover through Recovery Mode)Enter the device into DFU mode, if it doesn’t help. create your own firmware or load another
    8The firmware is not supported by the device (for example, you downloaded the firmware for the wrong generation of the device)Download the firmware supported by your device model
    9Kernel panic in an iOS device when working with firmware. Usually occurs when the data transfer via the USB cable is interrupted, or when the firmware is incompatible with the selected recovery modeRestore the firmware via DFU Mode. Check the mechanical connection of the device to the computer. Plug the cable into a different port or replace the USB cable
    tenIncorrectly assembled custom firmware due to which the low-level LLB loader was damaged or completely missingCreate custom firmware yourself, or upload another custom firmware
    elevenA number of files required for downloading were not found in the ipsw firmware fileCreate custom firmware yourself, or upload another custom firmware
    thirteenProblem with USB cable or 30-pin (lightning) connector, or trying to install iOS beta from WindowsReplace the standard cable or change the USB port. Disable USB 2.0 support in the computer BIOS
    14During the flashing process, a violation of the integrity of the ipsw file of the firmware was detectedDisable antivirus software, disable firewall, change USB cable or connect your iOS device to a different port on your computer, download a different firmware
    17Upgrading from one custom firmware to another custom firmwareUse Recovery Mode or DFU Mode to upgrade to custom firmware
    eighteenThe iOS device media library is damagedIn most cases, only a flashing will help.
    19“ITunes could not sync to iPhone ‘[iPhone name]’ due to an unknown error (-19).” The error occurs after updating iPhone 3G, iPhone 4 to a later version of iOS, during a backup while syncing iPhone with iTunes.Uncheck the Automatically sync if iPhone is connected checkbox on the Overview tab in the Devices menu. Connected Machine Model ”in iTunes, remove and connect iPhone. Then sync again. If the error persists, you need to restore the device to a new firmware, before that, create a backup copy in iCloud, so that after recovery you do not lose user data.
    20Device is included in Recovery Mode instead of DFU ModeTurn the device into DFU Mode
    21DFU error occurred during jailbreak.
    In some cases, error 21 occurs due to hardware problems (dead battery, low battery).
    To enable the device in DFU Mode, use the Pwnage Tool, sn0wbreeze or redsn0w utilities.
    If the above measures do not help, you should fully charge the battery, if this does not help, the device battery will need to be replaced.
    23Can’t read device IMEI or MAC address (at least iTunes can’t do that)If the problem persists on other firmware versions, there is most likely a hardware problem.
    26Incorrectly assembled custom firmware and, as a result, an error occurred when accessing NOR memoryCreate custom firmware yourself, or upload another custom firmware
    27, sometimes 29Looping error in iTunes 8.0 to 9.1Update iTunes to version 10 or later
    28Mechanical damage to the bottom cable or dock connector in the deviceContact an Authorized Service Center
    29Hardware problem with battery, bottom ribbon cable, or power controllerContact an Authorized Service Center to replace the battery, ribbon cable, or power controller
    31Unable to take the device out of DFU mode. Most often occurs due to hardware problemsContact an Authorized Service Center
    34Insufficient hard disk space to install softwareFree up space on the drive where iTunes is installed
    35Incorrect iTunes folder permissions on Mac OS XLaunch Disk Utility and restore access rights. (in terminal.app, enter the command: sudo chmod.R 700 / Users / [username] / Music / iTunes / iTunes Media. where [username] is the username)
    37Low-level bootloader (LLB) in the firmware does not match the device modelCreate custom firmware yourself, or upload another custom firmware
    39, 40, 306, 10054No access to activation and signing serversDisable Windows Firewall and antivirus programs. Update iTunes to the latest version
    54Software glitch while transferring data from device. In most cases, it occurs on unauthorized computers or when transferring compromised applicationsDelete “old” backups. Deauthorize your computer in the iTunes Store (Store menu in iTunes) and try again
    414Age limit for downloaded contentChange the year of birth in your Apple ID (in iTunes, under Store. View My Account)
    1002Unknown error while copying firmware files to deviceRepeat the flashing procedure
    1004Temporary problems on Apple servers (not received from the server SHSH hashes for the device)Repeat the flashing procedure later
    1008Apple ID contains invalid charactersChange your Apple ID without using prohibited characters. Try not to use anything other than Latin letters and numbers in your Apple ID
    1011, 1012Hardware problem with the modem part of the iPhone or iPadTry restarting your device. If the error persists, contact the service center.
    1013-1015ITunes trying to downgrade modem version in iPhone / iPadThe flashing was successful, but the iPhone / iPad cannot boot to iOS on its own with a downgraded modem firmware. In the TinyUmbrella utility, use the “Kick Device Out of Recovery” feature
    1050Apple activation servers are temporarily unavailableTry to activate your device later
    1140Problem syncing photos from iPhoto on Mac OS XDelete the iPod Photo Cache folder (in the context menu of the iPhoto library file, select Show Package Contents and delete the
    1394Damage to system files in the device as a result of unsuccessful jailbreakRestore the device and repeat the jailbreak procedure
    1413-1428Error while transferring data via USB cableCheck the USB connection of the device to the computer, cable integrity and the good condition of the USB port. Change port
    1430, 1432Device not recognizedMay indicate a hardware problem. Change the USB cable, connect the device to a different USB port, connect the device to another computer
    1450Can’t make changes to iTunes library fileOn Mac OS X, restore permissions, on Windows, check the owner and permissions of the iTunes library folder
    1600, 1611Restoration to custom firmware is carried out in DFU Mode, although it should be performed from Recovery ModeEnter the device into Recovery Mode and try again
    1601iTunes cannot get full access to the deviceDisable all background processes, change USB port or USB cable, reinstall iTunes
    1602iTunes could not detect the device while preparing to updateCheck the hosts file for entries like “xx.xxx.xx.xxx gs.Apple.com”, if any, comment them out (insert a “#” before the line). Disable all background processes, change USB port or USB cable
    1603, 1604Trying to restore a device without jailbreak to custom firmwareJailbreak your device with the current firmware. Please note: jailbreak using Spirit and on the JailbreakMe website is not complete and also leads to similar errors.
    1608ITunes components are damagedReinstall iTunes
    1609The version of iTunes to work with your device is outdatedUpdate iTunes to the latest version
    1619iTunes cannot with the device in DFU mode, in normal mode it successfully recognizes itUpdate iTunes to the latest version
    1644Third-party programs are accessing the firmware fileClose all programs running in the background, disable firewall and antivirus, restart your computer
    1646iTunes could not recognize the device in active modeReboot iOS device, restart iTunes
    2001Mac OS X driver problemUpdate Mac OS X to the latest version
    2002ITunes access to the device is blocked by other system processesClose running programs, disable antivirus, restart your computer
    2003USB port operation problemConnect your device to a different USB port or a different computer
    2005Damaged USB cableReplace cable
    3000, 3004, 3999No access to the firmware signing serverAccess blocked by a third party app, disable firewall and antivirus
    3001, 5103.42210iTunes cannot download videos due to hashing errorsUpdate iTunes, locate and delete the “SC Info” system folder (Windows 7:
    READ  Where is the copy of iPhone stored on computer

    \ Documents and Settings \ All Users \ Application Data \ Apple Computer \ iTunes; Mac OS X:

    Reboot (Soft Reset) the device to restore it

    How do I restart a gadget? Step-by-step instruction:

    • Simultaneously press and hold the Power and Home buttons for 10 seconds.
    • When the “apple” logo appears, release the buttons.

    Reset via settings menu

    Step-by-step instructions for restoring iPhone 5S using standard device tools:

    • It is required to open the device settings menu.
    • In the category “General” activate the command “Reset”.

    Of the 6 proposed options, attention should be paid to two:

    • “Factory reset”, which allows you to return the phone to its original state and save all user data;
    • “Reset settings and content”, which destroys all data except factory settings.

    Important! Such a reset lasts no more than 1 minute, but if the above methods did not work, further actions will be carried out through iTunes.

    Recovery in DFU mode bypassing iOS device

    If you choose this update mode, user information will be destroyed on the iPhone 5S, which determines the need for a preliminary backup. Among the positive characteristics of such a reinstallation of the OS is the prevention of further failures with code 50, 47, 14, 30 14, 31 94, 40 05, 40 13, 40 14, etc.

    Before starting the procedure, the developers suggest preloading the current version of iOS through the Apple support site, this requires:

    • Go to http://www.getios.com/ and indicate the name of the device in the appropriate field.
    • In the The Model drop-down list, specify the device model.
    • Select iOS version (starting from 7th).
    • Click Download and get ready to download a file weighing several gigabytes.

    Standard ways to recover your device

    If the programs are installed incorrectly, the functionality and settings of the iPhone 5S can be seriously damaged. Usually, if the phone “freezes”, a simple and effective solution for the normal functioning of the device from Apple is to restore.

    Fix iPhone 5 iTunes Error 4005 Restore Hardware Repair / исправление ошибок 4005

    Causes and solutions to error 4005 on iPhone 5s

    When restoring Iphone 5s software, error 4005 usually occurs for one of the reasons:

    • Crashes during download or incomplete installation of iTunes software.
    • Corrupted iTunes registries due to recent software changes (installs or uninstalls) related to iTunes.
    • Virus / Malware Impact on Windows File or Application Folders Associated with iTunes.
    • Malicious or mistaken deletion of files associated with iTunes by another program (during installation or update).

    Eliminating possible causes will ensure that the error does not repeat itself in the future.

    The main symptoms of error 4005

    Error 4005 (when restoring Iphone 5 or installing programs, when iTunes is running, shutting down Windows) has a number of symptoms:

    • Error 4005 is displayed and the active application window crashes.
    • PC crashes frequently after crash code 4005 when launching a specific application.
    • The message “The iPhone [device name] could not be restored” appears.
    • Slow Windows operation and responsiveness to mouse or keyboard.
    • Periodic PC freeze for a few seconds.

    Update. step-by-step instruction

    Having connected the device to a PC using a USB cable, you should switch the gadget to DFU mode through a number of settings:

    • Hold down the Power and Home buttons.
    • Release the Power button when the screen turns off and hold down “Home” (for 10 sec.).
    • If you enter DFU correctly, the PC will inform you through iTunes about setting the appropriate mode for the phone (it will be turned off, nothing will be displayed on the display).

    After identifying the device through iTunes, it is important to hold Shift and click on the “Restore” button.

    Specify directory with preloaded iOS version.

    At the end of the firmware, the application will offer to return the archived user data from the backup. If there is no backup copy, it is enough to disconnect the device from the PC.

    It is important to understand that updating the phone in DFU mode by formatting the memory and installing the OS in its cleared zone is carried out more correctly, which will lead to a low probability of failures 47, 3194, 4005.

    | Contacts | Content | RSS