Error 4005 when restoring iPhone

Table of Contents

Fix iTunes error

There is something wrong with my iPhone and I don’t know what to do now. Please, help! Now I can’t restore my phone! When I tried to restore my iPhone 7 via iTunes, it didn’t work, but the error message appeared: “Failed to restore iPhone / iPad. An unknown error has occurred (9/4005/4013/4014). ” I wonder if this problem can be solved? Please give me the easiest and most efficient way. Many thanks! “-David

It may not always run smoothly when you try to update or restore iPhone or iPad via iTunes but failed with error 9/4005/4013 / 4014. Your iPhone may freeze or disconnect, which means you cannot successfully restore iPhone / iPad. Usually your phone can have a lot of problems, such as getting stuck in the Apple logo or restarting automatically multiple times, etc. These problems can likely occur due to USB connection, computer operating system issues, iPhone system issues, or for the fact that a viral infection can also cause an error. Your iPhone? How to fix iTunes error and restore iOS devices successfully? Now in this article, we are going to tell you the best solution to get rid of iTunes error 9/4005/4013/4014 in two ways.

How to fix iTunes error 9/4005/4013/4014 when restoring iPhone

Download the program and connect the device to your PC. First, you have to install iOS System Recovery on your computer and run it. Then connect your iPhone with a USB cable.

error, 4005, restoring, iphone

The program will automatically identify your device. Then you can see many different interface options and click on “Fix iOS System” under “ Tools.” Then just click on “Run” Option to Continue.

Start Firmware Download In this step, the program will help you install the latest iOS version on your iPhone and identify your phone model and type. Then click “Repair”.

To fix the iTunes error on your phone, you must install the firmware. It will take a while and you must wait patiently and not unplug or operate the device during the boot process.

Restore iPhone System to Normal After that, iOS System Recovery will automatically start the recovery process.

After you can see some words like “System fix done on the interface, then you can use and restore your iPhone without data loss.

Social Share

Stay tuned for future events and news

Fix iTunes error 9/4005/4013/4014 when restoring iPhone

Fixed iTunes error 9/4005/4013/4014 via iOS System Restore

Biggest iOS System Restore is for users to fix iTunes error 9, 4005, 4013 or 4014 when restore iPhone and get their iPhone, iPad and iPod touch back to normal. It fixes almost all abnormal problems of iOS system, such as: freeze in recovery mode, DFU mode; stuck in connect to iTunes mode or restart multiple times; iPhone / iPad becomes black screen, red or blue screen, or freezes and not responding at all. Sometimes, if you have these common scenarios and your phone encounters an error (9/4005/4013/4014), then you can use iOS System Recovery as soon as possible. In addition, iOS System Recovery is fully compatible with Windows and Mac versions and supports system requirements such as the latest iOS 11 and earlier.

Now you can download the trial version of iOS System Recovery to your computer first and refer to the tutorial below and fix iTunes error 9/4005/4013/4014 easily.

Free download iOS System Recovery:

Fix iTunes 9/4005/4013/4014 Error with iTunesFix Tool

iTunesFix tool is generally recommended as the best way to fix iTunes problems, like fix iTunes 9/4005/4013/4014 iPhone Restore Error. It is an awesome tool to fix iTunes errors and problems without data loss, such as iTunes can’t connect, iTunes failed to install / update, iTunes iOS backup / restore problems, etc. What’s more, it can also clean up unnecessary iTunes files selectively or all at once: cache, logs, cookies, junk, old iOS backups, software updates used, etc.; Completely uninstall iTunes on computer, including iTunes media (music, videos / movies, playlist), iOS backups, iTunes / iOS update files, other useless iTunes files, related components and user data. To summarize, it provides you with the easiest way to get iTunes back to normal.

Run the program on the computer First, run the iTunesFix program on the computer, it will automatically detect your iTunes.

Select the fix mode If there are no problems with iTunes and its components, you will be in the home interface of the program. Choose one of the repair modes. Here are “Fix iTunes Connect Problems”, “Fix iTunes Install / Update Problems”, “Restore Backup / Restore Errors”, “Fix Other iTunes Problems”; “Quick Clean”, “Deep Clean”, “Wipe Out” are available.

To fix iTunes error 2/13/56/1002/3194/4037 and other unknown errors, select Fix Other iTunes Problems.

Fix iTunes error and return it to normal In the last step, click “Repair” to start repairing. Please keep the Internet stable until the completion of the recovery process.

When the repairs are complete, click “Open iTunes” to launch iTunes and try again.

Checking the USB port and USB cable

Sometimes error 4005 is caused by a malfunctioning USB port. It is easy to check (and thus fix the problem) by plugging the cable into a different port on your PC. If the port is okay, also check the cable itself for faults by connecting it to another PC. In addition, you can also try to restore your iOS device on another computer.

Restart your computer

After downloading the latest version of iTunes (if you did not have it before), you may need to restart your PC in order to check if error 4005 appears again now. Restart your computer using the Start. Shutdown. Restart command. Also, check for updates to your PC operating system and drivers and install them if necessary.

Launching an antivirus program

To make sure that the error is not a result of a virus or malware infection on your computer, run the antivirus installed on your PC. If suddenly you do not have it. immediately install it! Many of these problems will be prevented. If infected files or programs are found, perform a comprehensive cleaning of your computer. It will not be superfluous to also clean the system of temporary files and folders.

How to fix error 4005 on iPhone, iPad and iPod

Error 4005 can occur when updating or restoring iPhone, iPad or iPod and means that your device cannot be restored. In this article, we offer our readers some simple and effective ways to fix error 4005 on iPhone.

The causes of error 4005 in iTunes can be different, ranging from malicious actions of virus programs that prevent the successful operation of programs on an iOS device, including iTunes, to malfunctions of Apple Mobile Device Support (AMDS). In addition, the error may be hidden in the iTunes software itself, for example, the download package may be damaged or the installation was not completely completed.

Before taking any action to resolve error 4005 on your iOS device, make sure that the following prerequisites are met:

  • 1) the battery of your device is fully charged;
  • 2) the available memory on the device is at least 1 GB;
  • 3) the latest version of iTunes is installed on your PC.

So, below we present to you several ways to fix error 4005 “Failed to restore iPhone”.

Reboot iOS device

Restart your iPhone, iPad or iPod. Perhaps the error occurred only due to a temporary system failure of the iOS device.

iPhone X, iPhone 8, or iPhone 8 Plus: Press and immediately release the Volume Up button. Press and immediately release the volume down button. After that, hold down the side button until the “apple” appears.

iPhone 7 or iPhone 7 Plus: Press the side and volume down buttons at the same time until an apple appears on the screen.

iPhone 6s and earlier, iPad or iPod touch: Press the Home and Top (Side) buttons on the screen at the same time until Apple appears on the screen.

After rebooting, reconnect the device and check if iTunes works with it.

Using Tenorshare TunesCare

The surest, fastest, and most effective way is to go straight to the specialized Tenorshare TunesCare software designed to solve any iTunes problem. The application is available to absolutely everyone, has a user-friendly interface and helps to troubleshoot iTunes in just a couple of clicks.

Download Tenorshare TunesCare software from the developer’s official website and install it on your PC.

Connect your iOS device to PC using a USB cable and launch the program.

READ  How to Save Up for an iPhone at 12

Select “Fix All iTunes Errors”.

The program will start downloading the drivers for iTunes, after which the faults will be automatically fixed by the TunesCare program, and iTunes will also be automatically restarted for further work.

Ways to Fix Error 4005 When Restoring iPhone

Update iTunes to fix iTunes error 4005

The first thing you need to do before using iTunes is to always check the version of it. Otherwise, outdated iTunes can cause a variety of iTunes errors, including error 4005 iPhone 7 and others. Well, you can deal with improper iTunes download or installation by updating to the latest version too.

For Mac users, you can go to the iTunes dropdown menu to see if there is a version of iTunes available. If you are using iTunes on Windows, you can open the Help menu in the toolbar and select Check for Updates to complete the iTunes update.

Restart your computer to fix iTunes error 4005

If restarting iTunes is not the correct solution, you can restart your computer to give it a try. This is a good way to erase the registry and fix minor iTunes problems. So you can consider it as a 6 hardware solution for your iPhone 4005. Alternatively, you can force restart your iOS device to fix the problem.

Fix iPhone Error 4005 Using iOS System Recovery [Best Way]

If you don’t know why iPhone error 4005 occurs, you can turn to Apeaksoft iOS System Restore for help. It is an easy-to-use iTunes error fixer program that allows you to fix errors 4005. So you can use iOS System Recovery as your first choice to fix iPhone error 4005.

  • Fix iPhone from iTunes, error codes, DFU mode, recovery mode, Apple logo and any abnormal situations.
  • IOS system repair only without risk to your device.
  • Supports iOS 10.3 / 11/12 and iPhone X / 8 Plus / 8/7 Plus / 7 / SE / 6s Plus / 6s / 6 Plus / 6 / 5s / 5c / 5 / 4S, iPad Pro, iPad Air, iPad Air, iPad iPod and more.
  • Easy to use and secure enough not to lose data during iOS system restore.

Download for WinDownload for Mac

Step 1. Run iOS System Restore

Download iPhone error fixer 4005 for free. Launch it and select “iOS System Restore” to easily fix iTunes error 4005 and other iTunes errors.

Connect your iPhone to your Windows or Mac computer with a lightning USB cable. Then click the “Start” button in the lower right corner.

You can see various instructions on how to put your iPhone into DFU mode. Choose the most suitable model according to the iOS model you have. Then follow the step by step instructions to open the DFU Mode.

Step 4. Check the information of the discovered iOS device

This iOS System Recovery can detect your iOS device automatically. In this way, you can see the basic information about your iPhone or iPad on the home screen. Check and fix if there is anything inconsistent with your iOS device. Otherwise, your iPhone may be locked during the process.

Click the “Repair” button to start downloading the firmware and fixing the 4005 error on your iPhone or iPad. It will take a few minutes to complete the process. Don’t unplug your iPhone or iPad while recovering iPhone error 4005. It can also be a great helper if your iPhone gets stuck in the update process.

Check USB cable and USB port

Make sure you have properly connected your iPhone to your computer. If you are not sure if this is a malfunction of the USB cable or USB port. You can replace a new USB cable or plug into a different USB port.

Restart iTunes to Fix iTunes Error 4005

If you have iPhone 5/6 error 4005 Hardware and other problems, you can close and then restart iTunes to fix simple errors automatically. Sometimes iTunes just freezes with small glitches, so you can restart iTunes to fix error 4005 in iTunes with ease.

How to Fix iPhone Error 4005 with Top 5 Solutions

Many people report that they have iPhone Error 4005 when they try to update or restore their iPhone, iPad or iPod. In short, iPhone error 4005 breaks the connection between the iOS device and the Apple server. A common situation is that your iPhone or iPad is frozen in DFU mode or other system errors with the message “iPhone [device name] could not be restored. An unknown error has occurred (4005) “.

In fact, when you receive iTunes error 4005, you are already notified of certain issues. To resolve error 4005 in iTunes, you can read the following causes and solutions carefully. This is your complete guide on how to fix iPhone error 4005.

  • how to fix iPhone error 4005
  • What is iTunes Error 4005
  • what is causing iPhone error 4005

How to fix iPhone Error 4005 (5 Best Solutions)

Needless to say, you want to quickly get out of a bad situation and fix this iPhone error 4005. So, in the first part, we will show you 5 best methods to help you fix this problem. You can now try them one by one to fix iPhone error 4005.

What is iTunes error 4005 and why iPhone error 4005

ITunes error 4005 is a common iPhone, iPad and iPod error. This usually happens when updating or restoring. You may get similar iTunes error codes such as iTunes error 9 iTunes error 4013 and iTunes error 4014.As a result, you must first fix error 4005 on iPhone 5 and other iOS models. Otherwise, you will not be able to proceed with the iPhone update or restore process. There are many possible causes of iPhone error 4005, just read and check.

  • IOS system problems.
  • Broken links.
  • Launch the old version of iTunes.
  • Forget to completely disable iCloud data backup.
  • Don’t download or install iTunes properly.
  • IPhone Cannot Connect to Computer Due to USB Connection Issues.
  • Virus infection or malware attacks.
  • Apple mobile support is faulty.

No matter what is causing the iTunes error 4005, you can also try the solutions above. If you want to restart your iPhone and you find the above solutions are a little tricky to work with, then you can try resetting your iPhone without using iTunes.

With the above symptoms and reasons, things will be easy to get rid of iPhone error 4005. In addition, you can fix other similar iTunes errors with the recommended iOS System Recovery.

That’s all for how to fix iPhone error 4005. Hope you find something helpful from this article. If you have a new solution for iTunes error 4005, you can write down and share with us.

Replacing the USB cable

Quite often, such troubles are caused by the fact that the user is using a non-original or non-working cable. In this case, it is recommended that you replace the wire with one that has been certified by Apple.

Error 4005 when restoring iPhone 5S: how to fix

Most owners of modern gadgets are often faced with the fact that any communication device fails for no apparent reason. This problem did not pass by the owners of “apple” products. If error 4005 appears on the screen when restoring iPhone 5S, then this may indicate a variety of malfunctions. However, more often than not, the problem lies with iTunes. It is possible that the owner of the phone tried to reflash the device on his own or simply damaged the gadget. Also, water that got into the smartphone could lead to such malfunctions.

However, the most common error 4005 when restoring iPhone 5S occurs when trying to update iTunes. Let’s consider the most effective options for fixing it. If none of them turns out to be effective, then the only chance to restore the device to work. contact the master.

DFU recovery

This method is rather complicated, since in this case you will have to first copy all the necessary files and folders from the phone. This mode is considered emergency, therefore it is activated in the most desperate situations.

To turn on DFU, you need to turn off your phone and connect it to your PC using a USB cable. After that, you need to activate iTunes on your computer.

At the next stage, you need to press the button on the smartphone that is responsible for turning on the device for 3 seconds and, without releasing it, additionally press the “Home” button. In this position, you need to hold the buttons for about 10 seconds. After that, you can release the power key. However, the Home button must remain pressed until the phone detects iTunes software.

After that, a dialog box should pop up on the monitor in which the user will be prompted to activate the system restore process.

ITunes update

If the software on the phone is outdated, then this may well lead to similar troubles. Therefore, to fix error 4005 when restoring iPhone 5S, you should check the iTunes version and re-download the program if necessary. To do this, it is recommended to use only the official website of the manufacturer.

Error 4005 when restoring iPhone 5S: solving the problem by restarting your phone

This is the first way to quickly bring your phone to life. It is considered quite safe, since in this case you do not have to worry about the fact that data from the device may be irretrievably lost.

In order to fix error 4005 when restoring iPhone 5S, you must first restart the PC on which iTunes is installed, and then do the same with the iPhone itself. If you do not need to perform any complex manipulations to restart the computer, then things are different with a smartphone.

In this case, a forced restart is required. To perform it, you need to press the “on / off” button on the smartphone, while holding “Home” at the same time, and wait 10-12 seconds until the device turns off on its own. Next, you just need to wait until the phone is fully loaded and try to reinstall the updates for iTunes.

READ  IPhone Video Maker Apps

It did not help? Still showing error 4005 when restoring iPhone 5S? The solution to the problem may be different.

If all else fails, what to do?

You can try to fix error 4005 when restoring iPhone 5s by completely reinstalling iTunes. To do this, you must first turn on your computer and find all the installed “iTunes” files. After removing these components, make sure that there is no residual data on the PC and reboot the device. At the next stage, just go to the official Apple website and re-download the software.

If none of this helped, then most likely the problem lies not in the software part. In this case, it is necessary to repair the device itself. In the service center, such procedures are carried out only after detailed diagnostics, so it is worth preparing for impressive financial costs. If it turns out that the phone is not working due to mechanical damage, then the repair will be the most difficult to carry out. Therefore, it is better to take care of your beloved iPhone and do not try to reflash it yourself, as this can also lead to serious malfunctions.

Recovering through DFU mode

We enter the iPhone into DFU mode for different iPhone models, this is done differently in this case, let’s look at the example of the iPhone 7 and here are the instructions for other smartphones.

  • Turn off the iPhone and connect it to the computer;
  • Hold down the power button for three seconds;
  • Without releasing it, press the “Home” or volume down button, hold it for 10 seconds and then release it;
  • We hold the second button for another five seconds;
  • After iTunes will report that it has found the iPhone in recovery mode and will offer to restore it. In this case, the smartphone screen must be black.
  • We agree and the recovery process will begin.

Error 4005 when restoring iPhone. Decision

Today we will analyze the error 4005 that occurs when restoring an iPhone. We will give some advice on how to fix this error yourself, and for interest, let’s see which components malfunction leads to error 4005.

We recover with the help of special programs

There are many dedicated iPhone recovery programs, the most popular ones are listed below.

  • Dr. fone is quite simple to use, download, install, run, go to the “Repair” section. Then we follow the prompts of the system in the process, it will download and install the firmware itself.
  • 3uTools here we download everything the same, install it, go to the “Firmware and JB” section, “Firmware”, select the desired firmware. If you want to save the data on the device, check the box next to Quick Flash Mode. Then we press the green button “Firmware”
  • ReiBoot is another program, unfortunately, it is paid. Download it on the official website, install it, press the button “Fix all iOS problems” “Start” and the program will start restoring the iPhone.

Hardware problems error 4005

  • You can try to disassemble the iPhone, remove the battery terminal, wait a little and put it back. If there is a friend, another battery can be replaced;
  • There was a case that after replacing the compass chip, the problem disappeared;
  • If moisture gets into the iPhone, the board may have a short circuit which leads to this error.

Perhaps that’s all if you have questions or wishes, write in the Комментарии и мнения владельцев. Thank you!

cable change

Replacing the USB wire has already been written about earlier. However, it is worth considering a few more features of the cable error. In some situations, the wire may simply be damaged. However, even Apple-certified cables may not work properly. Therefore, it is worth trying several different options before excluding such a cause of breakdown.

Security bugs

Cell phones, as well as laptops and tablets, are very often installed with anti-virus programs, firewalls, firewalls and other utilities necessary to protect user data. However, when flashing or restoring the iPhone, this software may perceive manipulations with the phone as an attempt to load virus software into it. In this case, very often various errors appear on the screen (4013, 9, 4005 and others), indicating a communication failure. To avoid troubles, you must disable all programs of this type during the device update.

iTunes update

If an old version of the media player is installed on the smartphone, then this may well lead to similar problems. To solve them, you need to check iTunes for available updates. If they are, then you need to install them. However, it should be borne in mind that you can download any software only from the official website of the device manufacturer, in this case we are talking about Apple.

Problems connecting iPhone via USB

Error 4005 may be caused by a problem with the USB cable. This is also evidenced by codes 9, 13, 1600, 1643 and others. In this situation, the most logical solution would be to change the wire. If, however, reconnecting does not solve the problem, then it is necessary to check the settings of the antivirus programs, it is possible that they prohibit the connection of third-party cables. It is also recommended to restart the iPhone and disable the firewall and firewall for a while.

Synchronization problems

Quite often, error 4005 occurs while syncing iPhone, iTunes and computer. This is due to the fact that during the download of the data package, some of the necessary files are lost, and the software is not completely updated.

In this situation, there is no need to panic, since such a problem is considered the simplest one, which any user can cope with. The first thing to understand is that iTunes and iPhone were developed by the same company, respectively, such failures cannot lead to irreparable consequences in the form of a significant malfunction of the device. Don’t blame the developers either. IT technology is a collection of functions that need to be implemented in a tiny device. Therefore, such failures are quite normal costs. If there is error 4005 on the iPhone screen, then you can perform a few simple manipulations that will help restore iPhone without losing data.

Error 4005 when restoring and updating iPhone

Most often, the owners of the iPhone 4S contact the service centers for the repair of smartphones, who complain about problems with the firmware. As a result, the irreplaceable gadget either does not turn on at all, or an error appears on the screen. Often, such breakdowns can lead to not the most pleasant consequences: the loss of all personal data or the complete failure of the phone (in this case, iPhone recovery is impossible).

There are many reasons for such troubles. It is possible that there was a download error or the user tried to install third-party software on the smartphone. Also, a fairly common cause of breakdown is a hardware malfunction, which can be caused by mechanical damage or moisture penetration into the iPhone 4S case.

However, this does not mean that in order to “reanimate” a smartphone, you need to spend money on expensive diagnostics. There is a chance to fix your phone yourself.

So, most often users are faced with an unknown error 4005. Let’s consider the probable reasons for the appearance of such an inscription and methods for solving the problem.


Before seeking qualified help, it is worth trying the simplest method of solving most problems. If an error occurs while synchronizing multiple devices, you need to restart both the iPhone itself and the PC. Typically, computers restart on their own, and the iPhone has to be turned off and on forcibly. To do this, you must simultaneously hold down the power button and the “Home” key and wait about 10-15 seconds. After this time, a sharp shutdown of the smartphone should occur. After that, you just need to wait until the device is fully loaded and check if the 4005 error has disappeared.

If the problem persists, then it’s time for more serious action.

recovery via DFU

If all of the above methods turned out to be powerless, and error 4005 has not disappeared on the iPhone screen, then you can take a chance and restart the device in a special emergency mode of the DFU, which was developed by Apple in case of serious software failures of smartphones.

To do this, you need to follow several steps:

  • Disable iPhone.
  • Connect the device to a computer using a USB cable.
  • Launch iTunes Media Player on PC.
  • Press the shutdown button on the smartphone first for 3 seconds, and then, without releasing it, press “Home”. You need to hold the key combination for 10 seconds.
  • Release the mute button and hold Home until the iPhone detects the media player.

After that, a message should appear on the screen prompting you to perform the recovery procedure. At its end, the problem should be resolved, but in this case, most likely, there will be a complete loss of the last data.

After completing all the manipulations, it is recommended to perform a full scan of the iPhone and computer for viruses.

cable change

Replacing the USB wire has already been written about earlier. However, it is worth considering a few more features of the cable error. In some situations, the wire may simply be damaged. However, even Apple-certified cables may not work properly. Therefore, it is worth trying several different options before excluding such a cause of breakdown.

Reinstall iTunes

Damaged or simply outdated drivers can also cause disharmony and the inability to update or restore iPhone. It is recommended that you refresh your drivers and then try to resume the procedure.

The operating system tools also allow you to return to a previous state when the 4005 error has not yet occurred. If the problem is related to a system failure, this solution is quite effective.

Tools such as WinThruster are used to automatically repair registry files to provide scanning and error repairs. Before the procedure, the program creates a backup copy.

It is only possible to manually correct registry entries if you have the appropriate skills, since even the smallest incorrect action can lead to serious trouble.

READ  How to download photos from icloud to iPhone

Before the procedure, you also need to make a backup.

Usually, this error pops up in the following cases:

  • When the iPad suddenly, for whatever reason, loses its connection with the computer system while it is being updated;
  • In case of damage to the boot package or incomplete installation of the program to work with the “apple” device. iTunes;
  • Due to damage to the data of the iTunes program in the registry of your operating system, which may occur due to actions related to the installation or removal of this program;
  • Damage to your personal computer by a virus or malicious software;
  • Inoperative USB cable. for connecting computer and iPad.

iPhone not flashing, error (29)

As in cases with other iTunes errors, if the iPhone is not flashed, and the program generates an error (29), there can be several reasons for this malfunction: from an outdated version of iTunes or a USB cable malfunction to hardware problems of the device.

At the same time, hardware problems can be of a very diverse nature: from problems with the bottom connector to the compatibility of the battery with the motherboard, when checking which during the firmware an error is issued (29).

In such cases, you must either replace the iPhone battery with a new one, then reflash the device; or reflash with a temporary installation of another battery.

The root solution to the problem

If all the above methods did not fix the situation, and the 4005 error still appears, the third-party application Tenorshare ReiBoot will be an effective tool to fix it. designed to solve any iOS system problem. The program works with versions of iPhone XS MAX / XS / XR / X / 8/8 Plus / 7/7 Plus / 6s / 6 / 5s, as well as products of the iPad and iPod touch line.

Download Tenorshare ReiBoot software from the developer’s official website and install it on your PC.

Connect your iOS device to PC using a USB cable and launch the program.

After the program detects your device, click Enter recovery mode.

Run iTunes, which will detect your device in recovery mode and through which you can restore your device.

Thus, it is not difficult to fix error 4005, you just need to immediately turn to programs specially designed for such cases, such as Tenorshare TunesCare or Tenorshare ReiBoot, and in a couple of minutes you will be able to work with your restored iPhone without any problems. In addition, these programs are useful to have on your PC in case of any other errors or any iOS failures.

Reinstall iTunes

Another method to solve the problem is to uninstall the program and then reinstall it. Having completely removed iTunes from the section with the software installed on the computer, download the latest version of the installer from the official resource and install the application.

DFU mode

  • turn off the iPhone in the standard way;
  • we connect the device to the computer using the original USB cable;
  • we launch the iTunes service;
  • press “Power” and hold it for 3 seconds, after which, without releasing the power button, press “Home” and hold both these buttons at the same time;
  • after 10 seconds release “Power”, but not “Home”;
  • hold the “Home” button further until iTunes detects “apple” in DFU.

The steps taken will result in a disaster recovery option. The user will be offered the only option for further actions. press the “Restore iPhone” button and follow the prompts on the screen.

Instead of going the hard way and using barbaric methods of interrupting the operating system, it is better to use another computer with the latest version of iTunes installed on it. But if the same problem occurs on another PC, then you can completely eliminate software malfunctions and start more radical measures.

Error 4013.4014 or 4005 in iTunes when restoring iPhone 6: methods to solve

Apple technology is considered to be of the highest quality and, equally importantly, incredibly reliable. However, nothing and no one is immune from various kinds of troubles, breakdowns and mistakes. In today’s article, we will consider the scourge of all modern models of iPhone 6 smartphones. errors in iTunes when trying to restore a device. These errors can be 4013,4014,4005 or any other fault numbering.

Let’s take a closer look at this issue. So, let’s imagine the following situation: something happened to your iPhone 6 and you decided to restore its firmware using iTunes installed on your computer. However, various problems can occur when connecting iPhone 6 to computer. For example, iTunes may simply not recognize the connected device, or a failure may occur during an attempt to restore the firmware, which ends with one of the indicated or other numbered errors.

Here is the error text that you can see when trying to connect to the computer:

There is an issue with the iPhone “iPhone” where it now requires an update or restore (4014).

The problem can be fixed by updating the iPhone, which retains your settings and personal data. However, if the update did not work, you may have to click on Restore, which will erase all settings and personal data. If you backed up your iPhone to this computer or to iCloud, then you will be given the option to restore the backup to iPhone.

One way or another, the problem needs to be fixed, and the iPhone 6 cannot lie forever without restoration. However, first you need to determine the causes of the problem when restoring through iTunes and the appearance of various kinds of errors. There can be a lot of reasons, but let’s take a look at the most common ones:

  • The problem is on the computer side. It is possible that the user’s system has a problem with the Apple driver that detects and connects the device to the computer.
  • Problems with USB cables that connected the iPhone 6 to the computer. Perhaps the cable itself or the USB connection interface has been damaged due to some external influence. Also, such problems can occur when using cables from third party manufacturers.
  • There is a problem with iTunes. In most cases, such incidents occur when using an outdated version of Apple software.
  • Worst case scenario, there is some kind of hardware damage to your iPhone 6.

There are other reasons, but they are less likely. So, what we have on hand: the iPhone needs to be updated or restored, but iTunes cannot recognize the device or refers to errors 4013, 4014, 4005 and similar numbering. Now let’s take a look at what can be done in this situation.

Fixing Errors When Restoring iPhone 6 Using iTunes

Let’s go through the methods that have proven themselves in eliminating this problem from other users of Apple products.

  • Immediately, you need to make sure that you have the latest version of iTunes installed on your system. Often times, errors in this software are due to the fact that something is outdated. Go to the iTunes download page on Apple’s official website and download the latest version of the program from there. However, do not forget to remove the outdated version from your computer before doing this. This way you can reinstall iTunes cleanly.
  • If the problem with errors and the inability to update / restore iPhone lies in the USB cable, then you can try to replace it, and then risk performing the desired operation again.
  • We continue to analyze the problem with USB. Some users claimed that their problem with errors 4013, 4014, 4005 and others were caused by an incorrectly working USB port in the computer. The tip is this: try plugging your iPhone 6 into a different USB port and then update / restore the firmware via iTunes. If everything goes well, then you will have to solve problems with the USB port.
  • Another great way to solve this problem is to use DFU mode on your iPhone 6. What is this mode for? Well, usually, it is used to restore the firmware on the device if the classic method with iTunes does not work for some reason. So, let’s look at how to enter this mode and still restore your iPhone:
  • First, connect your iPhone 6 to your computer using a USB cable.
  • Then you need to hold down the Home and Power keys at the same time for about ten seconds.
  • After ten seconds, stop holding the Power button, but still keep holding the Home button.
  • You need to hold “Home” until your PC detects iPhone 6 in DFU mode.
  • After entering DFU mode, then everything will be already simple and you only need to follow the instructions on your computer monitor to restore iPhone 6.
  • We were able to get to the very last method in this article, and it may seem rather strange to you, and for someone it is extremely costly. To get rid of errors 4013, 4014, 4005, etc. when trying to restore iPhone 6 via iTunes, you need to change the battery on your smartphone. On the web, you can see a huge number of posts on sites, topics in forums and videos that changing the battery on the iPhone 6, as well as other iPhone models with the same problem, can help overcome difficulties. Yes, it sounds incredibly strange, but simply replacing the battery can help you overcome errors and problems when trying to restore your iPhone 6.
  • We hope that this article helped to cope with errors 4013, 4014, 4005 when restoring the firmware or updating your iPhone 6. If you still did not manage to do anything on your own, then it is not your fault, since Apple technology, and in general, any technique is rather complicated and sometimes you just need to contact a specialist. over, it is possible that your iPhone 6 has hardware problems.

    BICBON.COM 2021