Failed to recover iPhone error 4010

Restart your computer

After downloading the latest version of iTunes (if you did not have it before), you may need to restart your PC in order to check if error 4005 appears again now. Restart your computer using the Start. Shutdown. Restart command. Also, check for updates to your PC operating system and drivers and install them if necessary.

Using Tenorshare TunesCare

The surest, fastest, and most effective way is to go straight to the specialized Tenorshare TunesCare software designed to solve any iTunes problem. The application is available to absolutely everyone, has a user-friendly interface and helps to troubleshoot iTunes in just a couple of clicks.

Download Tenorshare TunesCare software from the developer’s official website and install it on your PC.

Connect your iOS device to PC using a USB cable and launch the program.

Select “Fix All iTunes Errors”.

The program will start downloading the drivers for iTunes, after which the faults will be automatically fixed by the TunesCare program, and iTunes will also be automatically restarted for further work.

Reboot iOS device

Restart your iPhone, iPad or iPod. Perhaps the error occurred only due to a temporary system failure of the iOS device.

iPhone X, iPhone 8, or iPhone 8 Plus: Press and immediately release the Volume Up button. Press and immediately release the volume down button. After that, hold down the side button until the “apple” appears.

iPhone 7 or iPhone 7 Plus: Press the side and volume down buttons at the same time until an apple appears on the screen.

iPhone 6s and earlier, iPad or iPod touch: Press the Home and Top (Side) buttons on the screen at the same time until Apple appears on the screen.

After rebooting, reconnect the device and check if iTunes works with it.

6 Ways to Fix Error 4005 When Restoring iPhone

Checking the USB port and USB cable

Sometimes error 4005 is caused by a malfunctioning USB port. It is easy to check (and thus fix the problem) by plugging the cable into a different port on your PC. If the port is okay, also check the cable itself for faults by connecting it to another PC. In addition, you can also try to restore your iOS device on another computer.

Launching an antivirus program

To make sure that the error is not a result of a virus or malware infection on your computer, run the antivirus installed on your PC. If suddenly you do not have it. immediately install it! Many of these problems will be prevented. If infected files or programs are found, perform a comprehensive cleaning of your computer. It will not be superfluous to also clean the system of temporary files and folders.

How to fix error 4005 on iPhone, iPad and iPod

Error 4005 can occur when updating or restoring iPhone, iPad or iPod and means that your device cannot be restored. In this article, we offer our readers some simple and effective ways to fix error 4005 on iPhone.

The causes of error 4005 in iTunes can be different, ranging from malicious actions of virus programs that prevent the successful operation of programs on an iOS device, including iTunes, to malfunctions of Apple Mobile Device Support (AMDS). In addition, the error may be hidden in the iTunes software itself, for example, the download package may be damaged or the installation was not completely completed.

Before you start taking any action to resolve error 4005 on your iOS device, make sure that the following prerequisites are met:

  • 1) the battery of your device is fully charged;
  • 2) the available memory on the device is at least 1 GB;
  • 3) the latest version of iTunes is installed on your PC.

So, below we present to you several ways to fix error 4005 “Failed to restore iPhone“.

The root solution to the problem

If all the above methods did not fix the situation, and the 4005 error still appears, the third-party application Tenorshare ReiBoot will be an effective tool to fix it. designed to solve any iOS system problem. The program works with versions of iPhone XS MAX / XS / XR / X / 8/8 Plus / 7/7 Plus / 6s / 6 / 5s, as well as products of the iPad and iPod touch line.

Download Tenorshare ReiBoot software from the developer’s official website and install it on your PC.

Connect your iOS device to PC using a USB cable and run the program.

After the program detects your device, click Enter recovery mode.

Run iTunes, which will detect your device in recovery mode and through which you can restore your device.

Thus, it is not difficult to fix error 4005, you just need to immediately turn to programs specially designed for such cases, such as Tenorshare TunesCare or Tenorshare ReiBoot, and in a couple of minutes you will be able to work with your restored iPhone without any problems. In addition, these programs are useful to have on your PC in case of any other errors or any iOS failures.

How to Fix Error 4000 On Itunes “The iPhone could not be updated. An unknown error occurred (4010).”

Windows operating system

The search for the IPSW file on a Windows device is based on the iOS hardware you are using, username, and Windows version. Open Windows Explorer and type.ipsw in the search bar. Be sure to check your entire computer. Once you find the file, delete it.

Windows XP: Open C: drive and select Documents and Settings. Choose Application, and then click Apple Computer, In the iTunes folder, you will find the IPSW file.

Windows 7, 8, 10 and Vista: Open C: drive and select users. Choose AppData and then click Roaming. In the Apple Computer folder, click iTunes and this is where you will find the IPSW file.

The iPhone Could Not be Restored or Updated An Unknown Error Occurred (4010) (4013) [Fixed]

Diagnose connectors and USB cables.

Basically, this is the first method to try before diving into fixing the “iPhone failed to update” error 14. You need to make sure that all the UB cables connected to the phone are working properly, as something wrong with them could cause an error.

READ  How to save audio from whatsapp to iPhone

Use an original Apple USB cable. Look for specific Made for ‘logos to ensure authenticity.

Use any other Apple cable.

Plug the cable into any other device and check if it works.

Plug the cable directly into the PC, not into the USB port of the keyboard.

IPhone failed to update error 14

This error occurs when trying to update or restore iOS versions using the iTunes app. This is also known as iTunes error 14. This error is commonly attributed to the following:

  • Defective USB cable
  • Incorrect firmware update
  • Outdated iTunes
  • Unstable network connection
  • Corrupted IPSW file
  • Insufficient storage

PS: If you face issues like iPhone Update Error 4000 or iTunes keeps asking for password, here are the best solutions for you.

Use your iPhone warranty to fix the “iPhone 14 update failed” error.

If even a hard reset could not fix your phone, then there is nothing else you can try on your part to fix the phone. All iPhones come with a one-year warranty. So if your iPhone hasn’t been over a year old, just take it to the Apple Store and exchange it for a new model.

Here’s how to work with the app:

Download the application to any computer and open it. Click on the System Repair button in the main menu.

Click the iTunes Repair tab and then select the Fix iTunes Errors option from the list. The application will immediately start checking the iTunes components and thereby fix them.

After the repair is done and you see that error 14 is still occurring, go back to the app and click the Advanced Repair button, this will give an improved fundamental problem solving.

If the error persists even after doing this, you can try selecting the Troubleshoot iTunes Connection Problems option to fix connection problems in iTunes.

Also, let’s find out how to fix update not available with this Apple ID and iPhone Error 4013 easily.

Select the IPSW file manually

If the above method for deleting the IPSW file did not work, you can try manually selecting the specific IPSW file you want to use in iTunes. Here’s how to do it:

  • Click on the Option key on Mac devices. Press the Shift key on Windows devices.
  • Now click the Restore button.
  • Click on the specific IPSW file you want to install.

Here’s how to work with the app:

Download the application to any computer and open it. Click on the System Repair button in the main menu.

Connect the problematic iPhone to this PC using any Lightning cable. Now select the Standard Mode option which will start the process of fixing error 14.

The app will first detect your iPhone model and then the latest firmware for it, which needs to be downloaded later. Click on the Start button and then wait as the process will take some time.

Once the firmware download is finished, the app will immediately start scanning the device and then repair it. After that, a notification will appear on the main screen of the application. The whole process will take less than ten minutes and your phone will be updated.

Hard reset iPhone to fix “Failed to update iPhone 14″ error.

This may be the last option for fixing iPhone failed to update 14. However, this method involves data loss and you should back up any important data in advance. Let’s see how to do it:

Press the sleep and home buttons at the same time and hold them for about 10 seconds, the screen will turn black and the phone will restart.

Hold the buttons down until the Apple logo appears on the phone screen, and then release them. Wait until the logo disappears from the screen.

The phone will now automatically reboot and that’s all you need to do after that. this is to enter the password.

Problems with security settings

ITunes error numbers: 2, 4, 6, 9, 1611, 9006.

These errors appear when a firewall, antivirus, or firewall prevents the connection to Apple update servers or device.

How to fix iTunes error

You can fix most errors in iTunes yourself by following these steps:

  • End the programs on the computer that are blocking iTunes from connecting to the Apple update server, if it does not help, uninstall them.
  • Disable your firewall, antivirus, or firewall while restoring or updating your iOS device.
  • Replace the USB cable connecting your iPhone or iPad to your computer with the original one. Learn to identify the original cable from a fake.
  • Connect your iPhone or iPad to a different USB port. It is better to use the USB ports located on the back of the system unit. I do not recommend connecting devices to USB ports on the keyboard, USB hubs and the front panel of the system unit. there are errors when connecting iPhone and iPad.
  • Try to completely remove iTunes and all its elements using CCleaner for Windows or ClenMyMac for Mac OS X. Then install the latest version of iTunes.
  • Try to restore or update your iOS device on another computer.

Sometimes, when trying to update the iPhone, the following message may pop up: “The iPhone could not be updated, an unknown error 4000 occurred” Next, we will find out why this error appears and how to fix it.

Network errors

ITunes error numbers: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200.

  • “An error occurred while downloading the software”.
  • “The device is not supported for the requested build”.

These warnings indicate that there is a problem with the computer’s connection to the Apple update server or to the iPhone and iPad.

READ  How to set up Apple Watch 3 with iPhone

Solutions for error 4000 when updating iPhone

Solution Install update via iPhone

If the error occurs during the automatic download of the update through iTunes, then you can try installing it directly through your iPhone. To do this, you need to do the following:

  • connect iPhone to a wireless Wi-Fi network;
  • go to “Settings”;
  • select the “General” section and go to the “Software update” subsection;
  • click on the “Download and Install” button.

Then iOS will find the latest update for the iPhone and automatically install it. With this upgrade option, error 4000 will not bother you.

Set up your operating system and update iTunes

IPhone error 4000 can occur if iTunes is out of date or iPhone is unable to sync with Apple’s server. There are many factors that can de-sync your iPhone from Apple’s server. These can be erratic time and date settings, using a guest account, an un-updated Windows or Mac, third-party software, and malware.

How to properly sync your device with iTunes:

  • Use an account with administrator rights.
  • Set Windows Date, Time and Time Zone Correctly.
  • Update your operating system (Windows) to the latest version.
  • Make sure iTunes is up to date.
  • If Windows is infected with malware, run an antivirus.
  • After scanning your computer, disable antivirus and other software that might interfere with the process, such as VPN and firewall.
  • Remove iPhone passcode before updating, or make sure you can enter passcode when needed.

Can’t update iPhone error 4000

Error 4000 when updating iPhone is a frequent guest for Apple users. The error message contains the following information:

Failed to update iPhone “iPhone”. An unknown error has occurred (4000).

After studying the problem in detail, we came to the conclusion that error 4000 when updating iPhone can appear for three specific reasons.

  • IPhone already has the latest updates. Often this problem occurs due to the fact that iTunes is trying to install the updates already installed on the iPhone. Simply put, an error with this code can serve as a kind of signal that your iPhone does not need to be updated.
  • The updated device is locked. Error 4000 can occur if the updated iPhone has a passcode. Unlock your device before updating.
  • Outdated version of iTunes. In some cases, an outdated version of iTunes causes this error. It is enough to install the latest version of the program on your PC, after which the error should disappear.

Now let’s see how you can fix this problem and complete the iPhone update safely.

USB problems

ITunes error numbers are 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014. You may also see an Invalid Answer warning “.

Fixing unknown error 3194 in iTunes when restoring iPhone: 19 comments

The information is helpful, thank you. It is also interesting that in the search engine this site is higher than the site “you-know-who”, which also has a similar infa)

“74.208.105.171 gs.Apple.com”
this line is missing

iTunes updated, deleted, reinstalled, checked hosts, still gives an error. tried on different computers. nothing helps

In the “File” menu, select the “Open” item and go to the C: WindowsSystem32driversetc folder. The hosts file lies there.

And should. Perhaps you have it hidden and therefore not displayed.

Thank you so much! The first tip helped! It turns out it was necessary to update iTunes

Hello. I had a jailbreak installed on my iPad, I decided to erase everything from the iPad that I could not do, now my iPad is rebooting all the time and the apple is on fire. So I decided to try to restore through dfu and got out error 3194. Now I’ve updated iTunes, and I’m downloading the update. question. when jailbreak will it work ?

updated iTunes but the downloaded iOS disappeared what to do?

Maybe you just need to download it again.

Hello, I did everything as you wrote, it still gives an error what to do?

Hello, I want to upgrade to iOS 8.4, I don’t know if this is possible or not? I don’t want to use iOS 9. iPad is jailbroken

For those who do not have the Hosts file. Think a little. Sometimes, at least.
Notepad automatically searches for.txt files, and hosts, if you have not touched anything before, “lies” as a regular file that is not displayed if you search for.txt.
At the bottom right when searching, change from.txt to All and everything will “lie”.

Hello. I had a jailbreak installed on my iPad, I decided to erase everything from the iPad that I could not do, now my iPad is rebooting all the time and the apple is on fire. So I decided to try to restore through dfu and got out error 3194. Now I’ve updated iTunes, and I’m downloading the update. question. when jailbreak will it work ?
————————————————————————————————
The same story, only with the iPhone 4, there was a jailbreak, dropped the content and settings. made a custom firmware via sn0wbreeze, I upload it via iTunes, error 3194, etc. host everything is clean, no Apple, even initially there was no.

Good afternoon, can you help with error iphone 3503

How to fix error 3194 in iTunes

The way to eliminate the error depends on the reason for its occurrence. If the reason is hardware, you should contact an authorized service center. Apple equipment is difficult to repair and, in particular, repairing the iPhone 6 is a painstaking and complicated process, the guys from iFixit rated the maintainability of the iPhone 5s at only 6 points out of 10. Therefore, we strongly advise against undertaking an iPhone or iPad repair with your own hands.

failed, recover, iphone, error

To fix the error in case of problems with the modem, you may need to either completely replace it, or restore contact connections. Of course, the specialists of the service center will “scout” you for a complete replacement of the modem, but there is nowhere to go.

READ  Where is music stored on iPhone

Software causes of error 3194

The reasons why this error occurs in the event of a software problem are:

    The computer does not have the latest version of iTunes.

The hosts file contains redirects of iTunes requests to third-party servers (Cydia caching servers).

  • Filtering TCP / IP addresses, firewall or security software (antivirus).
  • Hardware causes of error 3194

    Unfortunately, error 3194 isn’t just a software problem. If it appears when the status bar is filled by 2/3 (75%), with a probability of 99% it can be argued that the reason is a problem with the device’s modem or its power supply.

    Practical experience correcting error 21

    The apple lights up when turned on and constantly reboots, when the cable is connected. the iTunes icon and that’s it. When I connected it to the computer via a cable, the program said that I needed to update or restore.

    When flashing / restoring, there was ERROR 21. With this, the voltage on the battery was only 3.6 volts for charging, it did not react when measuring the voltage on the board was 0. After disassembling the device, an oxide was found near the capacitor C135 next to the transmitter. the capacitor dropped out, put it on charge. charging went on the connector of the battery board, a voltage of 1.2 volts appeared when flashing / restoring, it gave an error 6.

    Changed to another computer with Windows 7 64 bit disabled antivirus and firewall. I connected only the phone, without connecting third-party USB devices, the Internet was via Wi-Fi downloaded the firmware separately and during the firmware I pressed the Shift button and selected the firmware file (preferably a path without Russian letters). Update failed, restored. It didn’t work the first time. So you have to try. At first, there was also an error 6. As a result of long attempts, everything worked out. TA started working. Try it might help.

    Hardware problems

    ITunes error numbers: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 53, 56, 1002, 1004, 1011, 1012, 1014, 1667 or 1669.

    Appears when hardware malfunctions in iOS devices or a computer interfere with the update or data recovery.

    Why error 4013 occurs?

    There can be several reasons for the error. At the same time, it regularly appears on old 4s, 5 or 5s, and on “medium” models 6 and 7 versions. As a rule, outdated iTunes firmware is to blame. In this case, a simple and effective solution is to install the latest version of this program and try again to restore or update the device.

    It also happens that the computer software (software) is the cause of the error. As a result, a reboot of the system and device saves. Once upon a time, this also requires an OS update. Problems on the hardware side of the iPhone can also cause error 4013. These may be problems with connectors, microcircuits, etc. An unstable Internet network can also serve as the basis for this malfunction.

    In some cases, a damaged or non-original USB cable that is used to connect an iPhone to a PC contributes to the appearance of error 4013. At the same time, the USB port itself can “freak”, causing failures and not allowing the procedure for restoring or updating the gadget.

    As you can see, there are many reasons why a message suddenly popped up on the screen warning that an unknown error 4013 has occurred. Therefore, to make it easier for you, we have prepared a whole algorithm of actions that should be followed to eliminate it.

    For reference! Please note that error 4013 during recovery can pop up on various devices with the iOS operating system. Including the latest iPhone models.

    Using a different PC

    Internal resources also wear out, which leads to incorrect operation.

    If the problem persists, although the OS and the program are new, you should try updating the device on another PC.

    failed, recover, iphone, error

    Cooling the device

    A more adequate option would be to warm up the chips with a soldering station, but it would be even more correct to solder the contacts of the microcircuits, the power controller, since it is often the soldering that is damaged on impact, while the integrity of the other elements remains normal. In the absence of appropriate skills, it is better not to touch the “stuffing” of the device and entrust the matter to professionals, otherwise an undesirable outcome of the situation for your iPhone or iPad is likely.

    Additional recommendations

    In case of unsuccessful attempts to restore the functionality of the gadget yourself, you should contact an authorized service center.

    connect to a different USB port

    In this method, you only need to connect your computer to an alternate USB port. For example, for a stationary computer, it is recommended to use the USB port on the back of the system unit, and you should not connect to USB 3.0.

    How to troubleshoot error 4013

    complete reinstallation of iTunes

    In this method, we suggest that you reinstall iTunes, after completely removing the program from your computer.

    After you finish uninstalling iTunes, restart your operating system, and then download and install the new version of the Media Combine on your computer.

    | Contacts | Content | RSS