Flashing Monitor Screen What To Do Windows 10

Eliminate screen flickering in Windows 10

Screen flickering in Windows 10 usually occurs due to a display driver error or incompatible programs. To determine if the display driver or program is causing the problem, check the Task Manager for flickering. Then with that in mind, update, rollback or uninstall the display driver, or update or uninstall.

To learn more, click on any of the following headings and details will be displayed.

Press the Ctrl Alt Delete key combination to open the Task Manager. If you don’t see the Task Manager after pressing Ctrl Alt Delete, press the Ctrl Shift Esc keyboard shortcut to open the Task Manager.

If Task Manager flickers along with other items on the screen, the display driver is likely causing the problem. In this case, see Resolving Display Driver Problems.

If the Task Manager is not flickering while another part of the screen is flickering, the problem is likely to be caused by an incompatible program. In this case, see Updating or uninstalling an incompatible program.

For more information about flickering or distorted display of Surface Pro 4 laptop screen, see Surface Pro 4 laptop display flickering or distorted display.

If you have problems displaying the screen content correctly, you may need to start your computer in Safe Mode and follow these steps.

If Windows Update recently installed updates to your device, the display driver is rolled back. If not, try updating or uninstalling the display driver to fix flickering or distorted screen content.

Rollback the display driver

In the search box on the taskbar, type device manager, select it from the list of results.

Click the arrow to expand the adapters section.

Under adapters, right-click the adapter, select Properties.

Go to the Driver tab and select Roll Back Driver So.

You must have administrator rights to roll back or remove a device or driver package using Device Manager.

If the Roll Back Driver option is not available, Windows does not have a pre-driver to roll back to and this process cannot be completed.

Update your display driver

In the search box on the taskbar, type device manager, select it from the list of results.

Click the arrow to expand the adapters section.

Under adapters, right-click the adapter, select Updates.

You may need to contact your PC or adapter manufacturer to download the latest drivers for your system.

Removing the display driver

In the search box on the taskbar, type device manager, select it from the list of results.

Click the arrow to expand the adapters section.

Under adapters, right-click the adapter, select Properties.

Select the Uninstall driver for this device check box and click OK.

Reboot your device and Windows will try to install the driver.

If the Uninstall driver for this device check box does not appear, start your computer in Safe Mode.

Otherwise, check for updates on the manufacturer’s website for a specific program.

Some programs may be incompatible with Windows 10 and may cause flickering or distorted display of the screen contents. Try to uninstall the program by following these steps.

Click the Start button and select Settings Programs Programs and Features. Programs are displayed after a few seconds.

Scroll through the list and find the program you want to uninstall.

Select the program and click the Uninstall button Uninstall. When prompted for confirmation, click Yes.

After uninstalling the first program, restart your device and check if the problem with flickering or distorted display of the screen content is resolved. If nothing has changed, uninstall programs one by one until the problem is resolved.

Reinstall the program

Click on the Microsoft Store icon on the taskbar.

Select My Library.

Select the program you want to reinstall, click Install.

If the program is not from the Microsoft Store, reinstall it from the manufacturer’s website.

Ways to Fix Flickering Screen Issues in Windows 10

There are two ways to fix the error with Screen blinking:

  • Removing an incompatible application;
  • reinstalling the driver.

In the first case, we do the following:

  • We press “CtrlShiftEsc”. The Task Manager will open. Click “File”, “Run a new task”.
  • Enter “msc”. Go to the element “Computer Management”.
  • Select “Event Viewer”, then “Windows Logs”. Here you need to open the sections “Applications” and “System”.
  • The log will show all errors on which the exe service crashed. Determine which program has recently caused an error and Remove it.

To uninstall a program in Windows 10, follow these steps:

  • Click “WinR” and enter “cpl”. You can also open “Programs and Features” in the classic way through the “Control Panel”.
  • We find in the list the program due to which the screen blinks.
  • If the problem was related to a system component, click on the Corresponding section and uncheck the application.

It should be noted that often the screen flickers due to NortonAntivirus (and other antivirus programs), IDT Audio, iCloud.

If the desktop flickers after removing these programs, we recommend running a system scan for errors. To do this, do the following:

  • Right-click on the “Start” icon and select “Command Prompt (Administrator)”.
  • In order, we enter the commands “sfc / scannow”.
  • If this command did not find errors and did NOT fix them, you should enter “dism / online / cleanup-image / restorehealth”

After completing all the above steps, you should restart your computer.

In the second case, namely in the case of damaged or incompatible drivers, the steps will be as follows:

  • We press “Start”, “Shutdown”, hold down the Shift button and press “Restart”.
  • The computer will restart and a window with an option to choose an action will appear. We press “Diagnostics”.
  • In the next window, click “Advanced options”.
  • Press “F5” to boot Windows 10 in safe mode with network driver support.
  • Now we open the “Device Manager”. Right-click on the “Start” button and select the appropriate command. We find the driver in the manager. We select “rollbacks” and reboot the system as usual.
  • If rolling back the driver to an earlier version did NOT fix the error, try updating the driver and then uninstalling and installing a new one. After completing each operation, we reboot the system as usual.

If you have two cards installed, disable one and boot normally. We test each of them. Download and replace the drivers for the card that caused the problem when the system boots.

Additionally

It happens that in Windows 10 the welcome screen blinks, and after the system boots it stops. if the previous options did not help, the problem can be solved in 2 ways. creating a temporary profile and then deleting it. And updating the system using Media Creation Tools. this option is the longest, but most likely it will help your device.

Sometimes the problem may lie on the surface, but it is difficult to notice. If the desktop icons blink in Windows 10. check if your F5 key is stuck, it is she who is responsible for restarting and updating the desktop, browser and much more.

Also, try other tips that may help your problem:

  • Reinstall the card into an additional port on the motherboard (if any)
  • Return to a restore point or reset the system
  • Update the system or reinstall it
  • Check operation on another screen or display

In our article, we tried to thoroughly study the reasons why the Windows 10 computer monitor blinks, as well as all the possible ways to eliminate the common error. Hope this article helped in solving this problem.

Why is the desktop blinking?

Below I have given you. which captures how the Windows 10 desktop is constantly updated. The sight is funny, at first, but then depressing, since in most cases you will NOT be able to get a working desktop from a shortcut, they will just constantly jump and will not be clickable, but if in there will be an opportunity to launch something, it will be very difficult.

In most cases, the desktop is refreshed every second for a number of reasons, which we discuss below:

  • The most common option, which is also my favorite, is because of a new update, there are a lot of such problems, and they happen with every major Microsoft update, the recent example with Windows 1809, which has already been recalled, is a broken Internet or Missing sound, in a word merry.
  • The second option is problems with Windows services
  • Third point. this is a problem with device drivers
  • System files and their dependencies are damaged
  • Well, don’t forget about physical problems or equipment incompatibility
READ  How To Make The Monitor Main Display Win 10

Turn off sound notifications

If the above tips did not help and the shortcuts on the desktop are still blinking in Windows 10, then it is possible that the system settings, namely accessibility, are to blame. To disable them, follow these steps:

  • Open Windows Settings (Wini combination)
  • Open the “Sound” tab and for the value “Visualize sound alerts” set “No visual alerts”

File Explorer application error

“Windows 10 monitor screen blinks on startup: what to do?”. familiar to many programmers question. After all, after the official release of Windows 10, forums and specialized sites flooded with questions, one of which is the blinking Windows 10 screen.

The problem was poor testing of the system on different configurations and with different software. Due to compatibility issues on many devices, there was a situation where the screen was frequently refreshed, and some applications were constantly restarted.

Previously, this situation was observed if the following applications were installed on your PC. Avast, Norton Antivirus, iCloud, IDT Audio, AeroGlass. For a quick solution, Disable or uninstall these apps.

Restore system files

Anyway, the problem is relevant and the Windows 10 monitor screen periodically blinks, do not know how to fix it? Next, we try to scan the system for corrupted files. For you need:

  • Run a command prompt window as Administrator
  • Enter the following command
  • As the command completes, enter the following

Fixing a Blinking Desktop through uninstalling programs

If your system is responsible, then go to the control panel in the “Programs and Features” item, if available, then in the task manager that we called earlier, click at the top of the menu “File. Start a new task”

write in the window execute, magic word appwiz.cpl.

In the list of programs to remove, due to which your desktop screen blinks, you can select

  • Norton Antivirus, Nod32, Other Antivirus Programs
  • ICloud Utility
  • I DT Audio (faulting module IDTNC64.cpl)

We choose in “Programs and components desired item” and click “Delete”, after which you can restart your Windows 10 operating system.

Planned reinstallation of Windows 7 on 10: scammers versus retirees

Blinking windows 10 desktop solved in a minute

Good afternoon! Dear readers and guests of the major IT blog Pyatilistnik.org. While the whole world is raging about the installation of the Windows October 1809 update and solves a bunch of problems, for example, a black desktop screen, we will analyze one more problem related to this operating system, namely, we will analyze how to fix the situation when the windows 10 desktop is blinking or he might be a morgue. And as it turned out, you can easily find in this excellent product.

Why is the desktop blinking?

Below I have given you. which captures how the Windows 10 desktop is constantly updated. The sight is funny, at first, but then depressing, since in most cases you will NOT be able to get a working desktop from a shortcut, they will just constantly jump and will not be clickable, but if in there will be an opportunity to launch something, it will be very difficult.

In most cases, the desktop is refreshed every second for a number of reasons, which we discuss below:

  • The most common option, which is also my favorite, is because of a new update, there are a lot of such problems, and they happen with every major Microsoft update, the recent example with Windows 1809, which has already been recalled, is a broken Internet or Missing sound, in a word merry.
  • The second option is problems with Windows services
  • Third point. this is a problem with device drivers
  • System files and their dependencies are damaged
  • Well, don’t forget about physical problems or equipment incompatibility

Restore system files on a blinking Windows 10 screen

If your desktop is still blinking in Windows 10 and the first two methods did not help you, we try to scan your operating system for corrupted system files. This is done very simply, you run the command term as administrator and enter commands in it, you can also run it in the Task Manager window, as in the case with “Programs and components above, type cmd only”.

sfc / scannow (also wait for its execution)

Blinking windows 10 desktop solved in a minute

Good afternoon! Dear readers and guests of the major IT blog Pyatilistnik.org. While the whole world is raging about the installation of the Windows October 1809 update and solves a bunch of problems, for example, a black desktop screen, we will analyze one more problem related to this operating system, namely, we will analyze how to fix the situation when the windows 10 desktop is blinking or he might be a morgue. And as it turned out, you can easily find in this excellent product.

Fixing a blinking desktop through uninstalling programs

If your system is responsible, then go to the Control Panel in the “Programs and Features” item, if available, then in the task manager that we called earlier, click the “File. Start a new task”

write in the window execute, magic word appwiz.cpl.

In the list of programs to remove, due to which your desktop screen blinks, you can select

  • Norton Antivirus, Nod32, Other Antivirus Programs
  • ICloud Utility
  • I DT Audio (faulting module IDTNC64.cpl)

We choose in “Programs and components desired item” and click “Delete”, after which you can restart your Windows 10 operating system.

Safe Mode Manipulation

If you are so lucky that your desktop is still blinking, then most likely you have a problem at the driver level. To fix this, you can help us with Windows 10 Safe Mode, in which I already talked, see the link for how to get into it. The only select option “Enable Safe Mode Loading Network Drivers”

Open Device Manager. And you try to reinstall the driver or device. To do this, right-click on the adapter and delete it

After that, we update the configuration and check. If this does not help, then I advise you to update all drivers on the motherboard and on the card, you can download everything from the official website, or use the SamDrivers driver pack to automatically update all equipment.

If the situation is the opposite, and arose after installing fresh drivers on the card, then we also try them Rollback.

If there are 2 cards, you can turn them off One by one and try to boot in normal mode. The problematic driver will be the one that will be disabled at the time of successful loading. After all the manipulations with the drivers, Do not forget to reboot the system to apply the settings.

Disable item “Simulated flash

When icons or shortcuts on the Windows 10 desktop are blinking, you can try disabling visual sound alerts. This is done very simply, you press the Win and I hotkeys, in total, you will open the system parameters, you go into special abilities. further to the sound tab, and find the parameter there “Visualize sound alerts”, select an item without visual alerting.

Deleting the AeroGlass folder

While still in the same safe mode, delete the contents of the C: \ Program Files (x86) \ AeroGlass folder. AeroGlass. it is an application for making transparency or glass effects. It was cut from Windows 8.1 and Windows 10, but many install it separately.

What to do if the desktop is updated?

And so, if your Windows 10 desktop is blinking, then follow these steps. The easiest option is to reboot (as with error code 19), no matter how simple it sounds, 99% of problems in Microsoft are solved this way, and when the desktop blinks, NOT an exception.

If the problem persists, then we try to restart these services, which for some reason behave incorrectly. In order to do this, you need to go into the service snap-in, to do this, open the Run window, using the Win and R keyboard shortcut, entering the word services.msc in it

If, due to the flashing of the screen, nothing is pressed on the desktop, then press the magic key combination CTRLALTDELETE, you will see a window with additional parameters. Select item “Task Manager”.

Go to the Services tab where you should find two services

  • Control Panel Item Support “Problem reports and solutions” (Problem Reports and Solution Control Panel Support)
  • Windows Error Report Service

Right-click on any of them, and select the item from the context menu “Open Services”, to open the main equipment, with great functionality.

We also find services here:

  • Control Panel Item Support “Problem reports and solutions” (Problem Reports and Solution Control Panel Support)
  • Windows Error Report Service

Click on each of them with the right mouse click and select the item from the context menu “Stop”. After that, the screen and desktop in Windows 10 will stop flashing.

In 80% of cases, this helps to fix the situation that the Windows 10 desktop is updated, but unfortunately not 100%. The next method we will have to remove possible programs.

READ  Honor Phone Won'T Turn On Screen

Identifying driver problems

To correctly install the drivers, you need to know the model of the card and monitor used. It is strongly recommended that you download the driver packages from the official websites of the equipment manufacturers or install them from the disks supplied with the equipment (if available). Third-party sources, in addition to the drivers themselves, may contain viruses built into them, which will soon appear.

If you have satellite TV

Setting up satellite broadcasting is carried out using a TV, receiver and antenna. A dish or a provider’s cable is used as source. The receiver decodes the received signal by transmitting the picture. Malfunctions in any of the points of the signal transmission circuit will lead to screen flickering, distortion of the displayed picture. The occurrence of other malfunctions is NOT excluded.

Another way is to simply disconnect everything from the TV. If the defect persists, it means that there are external problems. you need to replace the cable. But the receiver can be subordinated only by the master, because the defect is most likely in the receiving module.

What to do if your monitor flickers

Since it may not be possible to establish exactly what caused the problem at once, it makes sense to act by the method of elimination, that is, by enumerating the options indicated below. The aLGorithm of actions for elimination of auto goods problem is as follows:

  • During the use of some types of monitors, it is periodically required to demagnetize them. The problem is solved using the button located on the device body or by selecting an option in the display menu.
  • In the operating system settings, the refresh rate is selected, and not supported by this monitor. For reconfiguration, boot the operating system in safe mode and set the refresh rate supported by the device in the display settings.
  • Incorrectly installed card or monitor drivers. You must download and install the appropriate software.
  • The program currently being executed is set to operation modes NOT supported by the monitor or card. You should adjust its image parameters so that they correspond to the modes supported by the hardware.
  • Exposure to malicious software, including computer viruses. To solve the problem, you should use a fresh antivirus program, run a deep scan on your computer, and then remove the detected malware.
  • Hardware malfunctions. both card and monitor. In this case, if there is no experience in eliminating such malfunctions, you should contact a computer repair company or a specialist.

Below are more detailed recommendations for solving the problem.

Microsoft recommendations

The first thing that representatives of the Windows 10 developer company recommend is to perform the following aLGorithm.

Launch the “Task Manager” using the context menu of the taskbar or the key combination “CtrlShiftEsc”.

If the flickering has disappeared or the Task Manager window is excluded from the flickering zone, then it is caused by some running program. It is better to remove such an application from the system altogether.

We go to the “Administration” “Control Panel”.

Expand “Event Viewer” and click on “Windows Logs”.

We open the files “System” and “Applications” one by one, study the information of the “Warning” or “Error” level placed in them.

Close the program for the first time, complete the Corresponding Process, and update the Problem Application from the official website.

If after installing a new version of the application the error does NOT disappear. Remove the software product. This is done through a standard uninstaller, a link to which can be found in the “Start”, or through the “Programs and Features” component located in the “Control Panel”.

Based on the experience of many users, we can conclude that image flickering in Windows 10 disappears after removing Norton Antivirus and Some other security programs, iCloud, IDT Audio for x64.

In the second case, after installing Windows 10, there were problems with the graphic card driver: It did not install, or the installer cannot update the driver.

Here you just need to download the driver for your card from the manufacturer’s website, remove the old one and install the new one, followed by restarting the computer. The easiest way to do this is through the “Update Center”.

We go to “Update and Security”.

  • If the first tab contains the “Check Now” button (this means that automatic check for updates is turned off in Windows 10), click on it.
  • After checking for updates or if there is a “Install now” button, click on its icon.

Wait for Windows 10 to complete the update and restart the computer.

The last thing you can do to solve the problem when the screen is flickering is to completely remove the driver for the graphics adapter and monitor, followed by manual installation of the necessary software downloaded from the manufacturer’s website.

If, due to the flashing of the monitor, you cannot perform the above steps, boot Windows 10 in “safe mode”, and then update the software regarding the adapter and display.

If you have two adapters on one computer (discrete and integrated), deactivate them one by one to determine which driver is causing the display to flicker. This is done in the “Task Manager”: calling the context menu of the map and click “Shutdown”, then restart the computer.

Flashing Monitor Screen What To Do Windows 10

For what reasons the monitor screen flickers?

Due to malfunctions with the monitor screen Not only the level of quality and productivity of work decreases, but also severe eye fatigue appears, as a result of which vision is actively impaired. It is worth examining the main reasons for this kind of malfunction.

Let’s consider the main causes of flickering on the monitor screen

Table of the main causes of flickering on the monitor screen.

Name and description of cause Remedy
The monitor has not been demagnetized for a long time. Some models need to be demagnetized after prolonged operation for proper operation.You need to go to the monitor settings, find there an option called “monitor demagnetization” and enable it. In some cases, the corresponding buttons are located directly on the monitor itself
The computer is set to the wrong monitor refresh rateIt is worth checking the frequency level, and, if necessary, set the maximum value
Incorrectly installed or not working GPU driversYou should go to the GPU manufacturer’s website, download the latest version of the drivers and install them. You can first check which version is installed right now
The presence of viruses or infected programs on the computerIt is enough to update the anti-virus database, start a scan, wait a certain time and then remove viruses
Hardware problems. They can be observed both in the map and in the monitorIt is recommended to take the PC to a specialized company or call a qualified technician at home

Application errors

In this case, the symptom looks like this. the operating system behaves correctly until a certain program is launched, there are problems with the image. But when you start any of the programs or, for example, a game, the image on the screen is distorted, dead people start, or horizontal stripes go. If it is possible to change its settings without leaving the application, you must do so, go to the corresponding menu in the program.

If there is such a possibility, the program may have a separate exe-file that allows you to configure it before the main application starts. It is also possible to change the resolution and refresh rate of the screen in the so-called config files of the application. This requires certain experience, or in SEPARATE cases, you can find step-by-step instructions for changing the settings in this program on the Internet.

Screen blinks in windows 10. what to do about it

Solving hardware problems

If the software image failed to get rid of the flickering of the laptop screen, most likely the problem is related to the failure or malfunction of one or more components responsible for displaying the image on the laptop screen.

The first step is to make sure that the card installed in the laptop does not overheat during operation. To do this, you can use various programs, which allow you to see the heating of the graphics accelerator during operation.

Please note: a clear symptom that the screen flickers due to overheating of the card is the absence of a problem when working “on cold”, that is, immediately after turning on the computer. If the screen is flickering due to overheating of the laptop graphics adapter, we recommend that you do the following:

If the screen is flickering due to overheating of the laptop graphics adapter, we recommend that you do the following:

  • Clean the laptop from accumulated dust and replace the thermal grease on the card chip;
  • Place the computer on a cooling pad and avoid blocking the ventilation holes on it, for example, when placing the computer on a soft surface.

Another common hardware prerequisite for screen flickering may be the bend of the loop responsible for displaying the image. Make sure, and not pinch the wire, if you disassemble the computer and visually assess the loop for damage and inspect its location.

READ  How To Make Time On iPhone Screen

Much more complex problems that can lead to flickering of the laptop screen are: problems with the matrix and burned out elements of the motherboard or card. If one of these problems occurs, you can get rid of the malfunction only by replacing components or with the help of specialists.

Note: It is quite easy to make sure that the screen flickers due to a faulty matrix. You need to connect your laptop to an external monitor or TV

If the image on it does NOT flicker, the problem is most likely in the matrix or in the loop.

Removal via “Settings”

  • Open the preferences panel by pressing the Win I keys on your keyboard. If that doesn’t work, click the Start button, and then select Settings.
  • Select System → Apps and features. After a while, a list of applications will appear.
  • Scroll down the list to find the application to uninstall. Select an app, and then select Uninstall. If you are prompted to confirm your selection in the User Account Control dialog box, click Yes. The application can be uninstalled automatically or a separate uninstaller appears, requiring additional steps to be taken in order to uninstall the application.

How to fix the screen flickering problem

The first thing you need to do is find out what is actually causing the screen to blink in Windows 10.

You can quickly find out by opening the Task Manager with the introduction of the keyboard shortcut Ctrl Shift Esc.

Next step. take a look at the screen and see if the task manager is blinking.

If everything on the screen is blinking and the Task Manager has comments, then you are dealing with an incompatible application. In the case where the task manager flickers along with everything else on the screen, then the problem is most likely with the graphics drivers.

After you have found out what is the cause of the problem, you can follow these steps to fix the problem.

  • remove incompatible applications;
  • update graphics drivers.

Flashing monitor screen what to do windows 10

Is your PC display constantly flashing? This could be a problem with an incompatible application or device driver. Here’s what you can do to fix it.

Generally speaking, most users should not have significant difficulty installing or upgrading to Windows 10. However, building an operating system that runs on thousands of hardware configurations is challenging, so some PCs are expected to experience problems.

One of the common problems that many users usually encounter in Windows 10 is flashing or flickering on the screen, which can be caused by incompatible applications or display drivers.

In this guide, we’ll show you how to troubleshoot monitor blinking in Windows 10.

  • how to fix the screen flickering problem;
  • how to remove incompatible applications;
  • how to update graphics drivers.

How to uninstall incompatible apps

Although there are a large number of applications that can cause problems, usually the blinking is caused by third-party antivirus or applications developed for previous versions of Windows.

If you have installed Norton Antivirus, iCloud and IDT Audio, these are applications known in the past as causing problems.

To remove incompatible apps, do the following:

  • Open settings.
  • Click on system.
  • Click on Apps and Features.
  • Select the application causing the problem and click Uninstall.
  • Click Delete again to confirm.

After uninstalling applications that may be causing the problem, restart your computer and see if that solves the problem.

If you’ve successfully fixed the issue but need an app, be sure to visit the software company’s support website for more information, an updated version, or alternative options that will work on Windows 10.

How to update your graphics drivers

If Task Manager is blinking along with everything else on the screen, the problem is most likely with the card driver.

In this case, it is recommended that you uninstall the current driver while the computer is in Safe Mode, and then reinstall the latest driver update. We recommend using Display Driver Uninstalle to uninstall the driver.

Windows Update always provides the Most Compatible Device Drivers, but this does NOT mean that they are the most recent version available. Alternatively, instead of using Windows Update, you can download and install the correct driver manually from your card manufacturer’s website. of course you will need to find out which card is installed on your computer, and you can find it by looking at the system information computer.

Here is a list of the most popular support sites for downloading the latest drivers:

If the latest driver does not fix the flickering issue on your computer, as a last resort, you can try downloading and installing an older driver from the manufacturer’s support website (if available). Although you may miss new improvements and features, sometimes an older driver version may work better on your computer.

The caveat when installing an older version of the driver is that Windows Update may try to replace it with a newer version. If a previous version is running on your computer, you can temporarily prevent the operating system from updating a specific driver.

How to fix the screen flickering problem

The first thing you need to do is find out what is actually causing the screen to blink in Windows 10.

You can quickly find out by opening the Task Manager with the introduction of the keyboard shortcut Ctrl Shift Esc.

Next step. take a look at the screen and see if the task manager is blinking.

If everything on the screen is blinking and the Task Manager has comments, then you are dealing with an incompatible application. In the case where the task manager flickers along with everything else on the screen, then the problem is most likely with the graphics drivers.

After you have found out what is the cause of the problem, you can follow these steps to fix the problem.

  • remove incompatible applications;
  • update graphics drivers.

Flashing monitor screen what to do windows 10

Is your PC display constantly flashing? This could be a problem with an incompatible application or device driver. Here’s what you can do to fix it.

Generally speaking, most users should not have significant difficulty installing or upgrading to Windows 10. However, building an operating system that runs on thousands of hardware configurations is challenging, so some PCs are expected to experience problems.

One of the common problems that many users usually encounter in Windows 10 is flashing or flickering on the screen, which can be caused by incompatible applications or display drivers.

In this guide, we’ll show you how to troubleshoot monitor blinking in Windows 10.

  • how to fix the screen flickering problem;
  • how to remove incompatible applications;
  • how to update graphics drivers.

How to uninstall incompatible apps

Although there are a large number of applications that can cause problems, usually the blinking is caused by third-party antivirus or applications developed for previous versions of Windows.

If you have installed Norton Antivirus, iCloud and IDT Audio, these are applications known in the past as causing problems.

To remove incompatible apps, do the following:

  • Open settings.
  • Click on system.
  • Click on Apps and Features.
  • Select the application causing the problem and click Uninstall.
  • Click Delete again to confirm.

After uninstalling applications that may be causing the problem, restart your computer and see if that solves the problem.

If you’ve successfully fixed the issue but need an app, be sure to visit the software company’s support website for more information, an updated version, or alternative options that will work on Windows 10.

How to update your graphics drivers

If Task Manager is blinking along with everything else on the screen, the problem is most likely with the card driver.

In this case, it is recommended that you uninstall the current driver while the computer is in Safe Mode, and then reinstall the latest driver update. We recommend using Display Driver Uninstalle to uninstall the driver.

Windows Update always provides the Most Compatible Device Drivers, but this does NOT mean that they are the most recent version available. Alternatively, instead of using Windows Update, you can download and install the correct driver manually from your card manufacturer’s website. of course you will need to find out which card is installed on your computer, and you can find it by looking at the system information computer.

Here is a list of the most popular support sites for downloading the latest drivers:

If the latest driver does not fix the flickering issue on your computer, as a last resort, you can try downloading and installing an older driver from the manufacturer’s support website (if available). Although you may miss new improvements and features, sometimes an older driver version may work better on your computer.

The caveat when installing an older version of the driver is that Windows Update might try to replace it with a newer version. If a previous version is running on your computer, you can temporarily prevent the operating system from updating a specific driver.

| Contacts | Content | RSS