Honor phone black screen what to do
What to do if you forgot your Private Space password?
To solve this problem, Android offers an alternative. to answer simple questions. They are installed when the gadget is turned on for the first time. If you did not do this initially, the only option to fix the problem is to delete.
Full factory reset via Recovery
- turn on the phone;
- simultaneously hold down the volume rocker and reboot;
- upon displaying the manufacturer’s logo, lower the buttons;
- wait until the smartphone restarts;
- perform the transition Wipe data / factory reset “/ Wipe data / factory reset
Confirm the operation. On older models, you need to press the buttons that are located on the side. On new products, buttons with these functions are located on the sensor itself.
How to unlock your phone with a fingerprint
To unlock the phone with your fingerprint, you need to touch the special reader (located on the back panel) with your index finger. There are backup options. a pattern or a code; Smart unlocking offers alternative options.
How to unlock Honor and Huawei smartphone if forgot password / key?
“How to unlock Honor and Huawei phone if forgot password?”. an important question in 2021, when it was not possible to remember the secret combination. The user is at a loss as to what he could have indicated. He begins to randomly introduce ill-conceived combinations, further aggravating the situation. Read about the solution to this problem below.
Tips for avoiding future problems
To avoid hard unlocking, experts recommend:
- make a backup;
- apply smart unlocking;
- write pin-code.
The first option assumes all important information to be stored on an additional source. Initially use smart unlock. Well, if you prefer the classic blocking options, then write down the password in a notepad. Despite the simplicity of memorizing the date of birth and phone number, experts do not recommend using such combinations. They’re easy to hack.
Restoring access through a Google account
After entering the wrong password, Honor and Huawei are locked for 60 seconds. Subsequent attempts block the device for half an hour, with a subsequent increase in time. During these periods, you can only activate emergency calls.
But the user needs to click “Forgot your password?” And then:
- enter data to open e-mail;
- confirm the entered data.
To implement this method, you need a stable Internet connection. You can also use Wi-Fi or mobile internet.
There are additional ways to unlock the screen, without using a password. Smart Look. It is used on devices that accept face, fingerprint reading as a security code. With this function, you don’t have to think about what to do if you can’t remember your password. The smartphone always accepts the owner’s personal ID.
To set up smart unlock, the user needs to follow the instructions:
- open “Settings”;
- perform the transition “Security and privacy” / “Fingerprint” or Face recognition “.
How to Unlock Huawei and Honor Phone If Forgot Password
Methods for unlocking Huawei and Honor phones, if you forgot the pattern, are a little similar on any Android.
- Google account. an easy option for Jimail mail owners;
- factory reset. requires more attention, but is also possible.
The first option functions after pressing the “Forgot the access code?” Button. But on newer gadgets, this option is simply not displayed. The second option involves the complete deletion of data.
Another way to unlock is the ADB program, which offers to customize Android using a PC. But the method only works with “USB Debugging”.
- Download Android Studio.
- Open the TEMP folder.
- Double click on Android-sdk.7z.
- Extract platform-tools to any other location, and then drag it to the root of the C drive.
- Change the folder name in ADB to make it easier to use later.
- Connect the device and new drivers to it.
If automatic drivers were not taken into account in the manufacture, then install the universal version. by downloading the Google USB Driver using the Device Manager.
- Activate the command line by pressing Win R.
- In the line write cmd, confirm “OK”.
To reset the digital password, open the ADB folder, in the command line, enter cd c: / adb.
Next, write the code as in the picture. Reboot your device. The gadget may ask for ROOT rights before entering codes. To get them you need to unblock Bootloader.
If you have any questions or complaints. let us know
- Download Android SDK.
- Unzip the file;
- Select Android SDK Platform-tools in the open window.
- Select Install Packages, “Accept license / Android SDK Manager.
- Open “Settings, select” About phone “.
- Click on “Build number” until you become a developer.
- Click on “USB Debugging”.
Go to emui.huawei.com/en/plugin.php?ID=unlockmod=detail. To display the code:
- turn off the gadget;
- wait until the smartphone starts working in Fastboot;
- connect a mobile gadget via USB to a PC;
Enter the Android SDK and hold Shift and write the command.
Why Xiaomi phone won’t turn on?
Very often, some time after buying a new smartphone, the user is faced with a situation where the Xiaomi phone does not turn on. We turned to the specialists of the ASC (Xiaomi Authorized Service Center) to tell them how to restore the phone at home.
Perhaps Xiaomi is fully functional, but it is not receiving power due to a faulty cable or insufficient charging power? Test them on another device.
If everything is in order, then the reason may lie in the power button. Assess its serviceability realistically and visually. The button should be elastic, not crumpled, pressed with a slight subtle “click”.
Sometimes a non-original case prevents the phone from turning on. Remove it from the smartphone case and try to launch again.
The microUSB socket often fails. With rough use, it wears out quickly, internal contacts move away from the landing pads on the motherboard.
Only professional repair in the service center will help here.
Lithium batteries used in smartphones have a built-in charge controller. During deep discharge, it closes the battery power line. This is done in order to protect against a drop in capacity to a certain value so that the battery does not fail.
Therefore, when discharged, the phone may not turn on, even when connected to a charger. In this case, the signal LED will flash red. There are also times when the white indicator blinks when pressed.
Critical software bugs are a common reason why a Xiaomi phone won’t turn on. They appear for different reasons. Here is some of them.
- Operating system crash at boot (system freezes).
- An update was being installed on the device, and a shutdown occurred (the battery was discharged).
- After installing TWRP.
- The action of malicious virus applications.
How to solve?
- Leave the phone on charge for a long time: one to six hours. This time should be enough to bring the gadget out of the state of deep discharge.
- Try to connect the gadget to another, more powerful charger.
- Force-charge the battery from a 5 volt power source, limiting the current to 300-350 milliamps.
If you have experience, it is recommended only to remove the back cover yourself using detailed instructions.
Xiaomi phone won’t turn on: 3 ways to solve
Practice has shown that the most common problem with a Xiaomi phone is the inability to turn on the device. If there was a mechanical impact, such as a strong impact, before the malfunction occurred, then everything is obvious. This is, with a high degree of probability, internal damage to the board.
But what if the reasons are not so obvious and the phone stopped working “by itself”? Let’s analyze the options why Xiaomi does not turn on, pointing out ways to solve them.
- Force reboot. It is carried out by long (about 10 seconds) pressing the power button. In this case, the phone should emit a short vibration signal and start.
- Reboot from the service menu. The engineering menu is entered by simultaneously pressing the power and volume up buttons. Next, you should turn off the device and try to turn it on again.
Re-flashing. Installing a new version of Android with MIUI shell solves software problems. In order to perform recovery in this way, you need to use special bootloader programs, for example, Mi Flash.
Warning: A non-numeric value encountered in /home/Xiaomi7/Xiaomishka.ru/www/wp-content/themes/publisher/includes/func-review-rating.php on line 212
Warning: A non-numeric value encountered in /home/Xiaomi7/Xiaomishka.ru/www/wp-content/themes/publisher/includes/func-review-rating.php on line 213
Hello dear friends! My name is Mikhail Xiaomi, I am a fan of Xiaomi technology, gadgets and smartphones. Having access to information, I try to provide interesting and high-quality content for the readers of Xiaomi. I share the latest news and exclusive materials.
High-quality solid instruction! It’s a pity she wasn’t there when I had such a problem with my phone. Bought a new Redmi 5 Plus phone. I had another phone in parallel. Therefore, I used the new one for a week and a half to get used to MIUI and explore the main features. As a result, I did not keep track of the fact that the phone was completely discharged.
I undertook to include it, but it is not in any. I kept the button on for a minute. the result was zero. I put it on charge did not react, although I got used to the fact that when you put the old phone on charge, the indicator immediately lights up.
It turns out that a really deep discharge has taken place. Chance also helped to understand this. Since it was a day off. I put the phone on charge and forgot, so it stood for 10 hours. Then I take it in my hand, press the button again and lo and behold, feel the vibration and see the Mi logo on the screen.
And then I already thought. the case is a pipe, 14 days have passed, but my phone does not work, what if the marriage cannot be returned and nothing can be proved. There was no limit to the joy of a work phone. )
I held it for 10 seconds and everything worked out. THX
I had a similar situation with the old Redmi 4. I sat shorter in YouTube, with charging. And she charged very sucks. the battery still sat on CHARGING. In the end, the phone went to zero (it was still working). The wire staggered. for a brief moment the charging was turned off. and the brick. I tried to cut it back, the answer is zero. even the indicator is off. I decided to leave it on charge for an hour. Did not help. Then I put on the charge from the camera, and left it for the night. I get up, I come to the phone. the screen is off. As a last resort, I held down the power button. After about 10 sec. he. finally. got it! Now it’s standing here, charging. And the instruction is one of the few that WORKS.
I now have exactly the same problem, (put it on charge, I will wait and hope)
Great article! I save to bookmarks. Prepared means armed)
Thanks for the battery tip! I have an old Redmi 4x, and who knows the cover is conditionally non-removable. Holding the power button for a long time did not help. I had to carefully pry off the back cover to manipulate the battery. As a result, the old man turned on, showed signs of life, and the happy one did not have to lose hope and carry him to the service, where they would take at least 400 rubles from me for thanks.
Thanks from me!
Thank you very much. Thanks to this article, I was able to figure out why my Redmi does not turn on and turn it on again. I was already afraid, I thought that it was broken and needed to be carried. And this is extra time, money, and I would still have to go without a phone. And it’s so nice, I figured it out myself and turned out to turn it on. Once again, I express my gratitude to the creators of the site and the author of the article.!
Hello. Nice article, informative. But unfortunately, it didn’t help me. I bought a new Mi8 when it went out. Became a brick. Any operations according to the article are ineffective.
The article describes solutions that help to turn on the phone in 95% of cases.
Please clarify what actions were performed with the phone? What firmware was there?
By itself, in order for the phone to work like this, nothing was done, and as a result it went out and stopped turning on. a rather extraordinary case.
The phone may have been flashed?
Good afternoon, Redmi 6 pro is charging and does not turn on, Mi constantly lights up every 5 seconds, goes out again and so on in a circle. What to do?
Judging by the symptoms, after the update by air, they grabbed the “bootlap”. It is recommended to look at the 4PDA topic about remote recovery and EDL mode.
I have the same trouble with Mi A1, what to do.
I was helped by the option to stick out the battery cable.
I have the same problem, the phone (Mi8) just lay on the table (did not fall, did not beat). At first, he stopped catching the network (he learned from people who could not get through to me). I turned it on, tried to call someone. it says there is no network. I pressed reset the phone, and most of it does not react to anything at all. The firmware version of miui 10 was installed on Android 9.
You managed to break the screen, then you repaired it yourself and now you are surprised that the phone does not work?
Yesterday, while using the phone, it just turned off, although charging was normal. does not load when turned on. At the boot stage (KD built for people) something is written there), then nothing happens. I left it overnight for charging, but with repeated switching on and off, nothing happens beyond the above stage ((((
If you can’t reanimate it in any way, then you can somehow connect it to the PC, so that at least all the info can be saved? Just connecting to the PC as before does not work, does not see the phone ((
If the preservation of information is important, then it is better not to take drastic actions so as not to harm even more. In this case, it is recommended to contact the service center. Judging by the reasons described, the case is not entirely standard; disassembly and diagnostics may be required for resuscitation.
Yes, and it’s better not to do Factory Reset yet, that is, reset to factory settings, since all user data will be lost.
Good day. My Xiaomi redmi Note 3 turned off during use. the charge was sufficient. Does not turn on for charging does not respond indicator does not light
Such is the situation: Mi 4c took it from the repair, changed the battery. All the rules worked. I had beta 10 miui 8.9.13 like. So, the phone was lying for a long time before the repair, and I decided to check for updates to the firmware. It turns out there are no more of them, well, everyone does not release updates for it, but I don’t even know much about this native updater, also in English.
There was a download update button there. Well, I downloaded it twice, until I realized that there were still no updates and that I was installing the same version. Well, I left this venture, put the phone down, I think let it lie for a while, started downloading the firmware, I just wanted the Russian one, that’s the whole point. In the meantime. The phone went out and turned up. Without my influence.
Well, I think, okay, apparently the firmware has become crooked. I’ll put another one and that’s all. Fortunately, I have already got used to breaking the bootloader bolts, like in two fingers. But here the main pitfall was waiting for me. The phone is not detected by the computer. The option is this, he did not zakirpichilsya at all, but can not start. That is, the mi logo appears, it goes out again and again, I connect it to the laptop, it immediately goes out and I can’t turn it on all connected.
I must say right away that the battery was above 80%. So, in the fast mode, the laptop does not see it either. I thought that it might be in the laptop, I put USB and there. Nifiga, the reboot did not work, I went to the PC and everything is the same there. OU and the phone in fastboot mode does not light up for a long time, it turns off immediately. It was already deep night and I decided that the morning of the evening was more intricate. I put my phone down and scored. I woke up in the afternoon. I’m trying to turn it on. And here …. NOTHING. Well, that is, absolutely no reaction.
I thought it would be an option to disconnect the battery physically, wait 10 minutes and connect it again. But I’m afraid a pitfall awaits me in the form of that…. Well, he is about zakirpichik and he does not accept USB. And yes, when charging or connecting to a laptop, the charging indicator does not light up. What is the actual question: What else can it be, besides my guesses? WELL before I take any action. I just don’t really want to open it, I have a minimum of experience with smartphones inside. I would not want to break the train. And I can’t give it for repairs yet. A little later if nothing works.
You can try to do a factory reset, in some cases such a simple action makes the phone work normally again. It is only desirable that there is a backup copy of the necessary data, since “reset” deletes user data from the phone.
I almost have such a situation) in general, after the street, I went into the apartment to visit a friend after the frost) I sat on the phone for a while, he sat down, put it on charge in an hour, I watch 2%, that’s all (I turned off the charging), the next day I come to myself and put on the charge.
As a result, charging above 0% does not rise! I lowered the settings to the factory settings 2 times, I did the battery calibration the same way without changes. On the USB charge I put it on, you can sit, the battery charge shows 65429%)))) but the charge does not go, I remove the USB from the phone, it turns off immediately and that’s it! I don’t understand how this happened, the phone was not damp. Clean in your on the street and after the frost street.
Interesting case. Thank you for sharing your information.!
What to do if Huawei Honor 9 and similar Android smartphones and tablets freeze.
The first method is the simplest, you may have already performed this step, but not for long enough. And so in order to restart the frozen Huawei Honor, you need to press the “Power” (on / off) button and hold it without releasing 10 seconds. 15. Usually, 15 seconds are enough for a forced reboot, but you may have to hold down the power button even longer up to 1 minute, if after these actions the smartphone just turned off, then you need to turn it on yourself in the usual way. If this does not help and the smartphone also freezes, then try the method below.
On some frozen smartphones and tablets such as Samsung and the like, you can apply these methods as well. To begin with, try to hold the same for 10.15 seconds, if it does not help, then up to 1 minute.
Press and hold the following buttons at the same time. Power button and Volume Down button.
If it doesn’t work, then try holding the “Power” button and the “Volume Up” button.
You can also hold the “power” button and the “Volume control and.” at both sides.