How to adjust monitor contrast in Windows 10

How to adjust colors using the color calibration tool

To adjust colors and calibrate your monitor in Windows 10, you need to use the monitor buttons to adjust specific color aspects. Drag the welcome window onto the calibration monitor. Even if you have several monitors of the same make and model, you need to configure them separately each. Click “Next”.

adjust, monitor, contrast, windows

The wizard shows that gamma controls the amount of light emitted from a particular color. By clicking “next” you can use the slider to adjust.

Achieve minimal visibility of small dots in the center of each circle, as the master tells us.

Brightness and contrast will be adjusted from your buttons on the monitor. On some monitors there are buttons that immediately adjust the brightness and contrast, while on others you will need to enter the menu on the monitor and select these two parameters there. To start setting up, click next.

Adjust the brightness so the shirt doesn’t blend in with the suit and the X is barely visible, as suggested by the master.

Adjust the contrast to the average pattern as recommended.

With color balance, colors should not “flow” into grays. Click next to adjust.

Drag the sliders to calibrate the colors.

You can now switch between the previous calibration and the weaving one. If you are happy with everything, click done, otherwise click cancel to cancel.

Calibrating the touchscreen on Windows 10 tablets

You must calibrate the touchscreen to ensure that your tablet responds well to finger touches. If the device is not calibrated, then instead of the pressed letters, others will appear on the screen or the image will rotate one hundred and eighty degrees.

To calibrate the touchscreen, follow these steps:

  • Open “Control Panel”.
  • Tap the “Tablet PC Settings” shortcut.
  • Press the Calibrate key. Touch the “Calibrate” key
  • Answer Yes to the User Account Control request.
  • The calibration program starts.
  • In the program window, touch the areas marked with a cross on the touch screen.
  • Apply changes.
  • Reboot your tablet.
  • If the calibration is completed with errors, then press “Reset” and repeat the calibration.

How to adjust monitor contrast in Windows 10

Improving the image quality using the side buttons on the monitor is not always enough for the indicator to be at the peak of a good display. The built-in calibration tool in Windows 10 will make sure your monitor can perform better. The main thing for content producers is to make sure that the work will appear on other devices, the same standard in quality. For general users, watching movies and photos will be improved. Before calibrating the monitor in Windows 10, reset the monitor to factory settings and turn off the lights in the room to avoid glare.

READ  How To Shift The Screen To The Right On A Computer Monitor

How to properly adjust the colors on your monitor

By default, on expensive monitors, the image is already very decent and does not require additional adjustment. If the picture is not suitable for the user, then you can already proceed to self-configuration in the interface of the monitor itself. You can additionally change the color parameters in the operating system itself.

NVIDIA Control Panel

Through the NVIDIA Control Panel, you can adjust desktop color settings for displays or improve picture quality if you are using a TV. Go to Display Adjust Desktop Color Settings, and select Use NVIDIA Settings.

After that, brightness, contrast, gamma, digital intensity and hue will become available for change. Very high or low brightness and contrast values ​​can limit the available gamma range.

Adjusting the color settings for the video will allow you to select the optimal video image settings for your display. It is recommended that you start video playback while adjusting to see the setting change in action. It is enough to go to the Video section Adjusting color parameters for video, and choose how to perform color adjustments With NVIDIA settings.

Changing the screen brightness using the battery indicator in the taskbar

Laptops and tablets have a battery indicator on the taskbar, which can also be used to change the brightness of the screen:

  • Left-click on the battery indicator.
    Click on the battery indicator
  • Click on the tile to change the screen brightness.
    Adjust the brightness level of the screen
  • You can change the brightness level at fixed values ​​from 0 to 100% in 25% steps.
  • Click on the Power & Sleep Settings tab.
    Click on the Power & Sleep Settings tab
  • Click on the line “Additional power settings” in the right side of the opened window “Settings”.
    Click on the “Advanced Power Options” tab
  • In the “Power supply” window, set the required brightness using the “Screen brightness” slider.
    Adjust the brightness level of the screen using the slider
  • Click on the “Power Scheme Setup” tab.
    Click on the “Power Scheme Setup” tab
  • In the opened panel “Change the parameters of the scheme” using the slider “Adjust brightness” achieve its optimal level when powered from the mains and from the battery.
    Adjust brightness on AC and battery power

What to do if the screen blinks

Frequent screen blinking in Windows 10 can be caused by two problems:

  • using outdated video adapter drivers;
  • incompatibility of the software application installed on the computer and system requirements.

The problem is not as common as it was during the period when Windows 10 was just beginning to spread.

This is due to the fact that the main companies that produce components for computers have brought their software applications to the required parameters. On those computers where video adapters made 6-7 years ago are installed, incompatibility is possible, since their drivers were developed without taking into account modern requirements.

To fix the error, you need to find out if the driver or software application is the source that creates the screen blinking. To solve the problem and restore normal operation of the display and video adapter, you must use the following method:

  • Right-click on the “Taskbar”.
  • Click on the line “Task Manager”.
    In the menu, click on the line “Task Manager”
  • Check for blinking in the Task Manager pane. If the panel blinks along with the screen, then the reason is in the old video adapter driver. If this does not happen, then the reason is in some of the installed software applications.
    Check for blinking of the Task Manager panel
  • Double click on the “Control Panel” icon on the “Desktop”.
    On the Desktop, double-click the Control Panel icon
  • Click on the “Administration” icon in the “All Control Panel Items” window.
    Click on the “Administration” icon
  • Double click on “Computer Management” in the “Administrative Tools” window.
    Double click on “Computer Management”
  • Expand the Event Viewer tab in the Computer Management window.
    Expand the Event Viewer tab
  • Expand the Windows Logs tab.
    Expand the Windows Logs directory
  • Check Application and System tabs for errors.
  • If a software application compatibility error is found in the Application tab, uninstall it. Then download the latest version of the application from the developer’s website and install it on your hard drive.
    Click on the Application tab and check for errors
  • If an error in the “System” tab indicates that an updated video adapter driver is required, then perform the replacement operations in the same way as for the software application.
    Click on the “System” tab and check for errors
READ  Black screen after booting Windows 10

How to properly adjust the colors on your monitor

By default, on expensive monitors, the image is already very decent and does not require additional adjustment. If the picture is not suitable for the user, then you can already proceed to self-configuration in the interface of the monitor itself. You can additionally change the color parameters in the operating system itself.

It is recommended to adjust the picture on the monitor so that it matches in color with a sheet of blank paper in a room with normal lighting. It is really difficult to make such an accurate adjustment, and in some cases it is not at all realistic. In this case, you can use the tools of the operating system itself to calibrate colors.

Special abilities

Visually impaired people may require a special picture mode.

Open Settings with the keyboard shortcut Win I and open “Accessibility”.

Go to the subsection “High contrast”, at the top, move the switch to the “On” mode, where in the drop-down list select the appropriate mode, and click “Apply”.

If necessary, change the colors of the main interface elements and apply the configuration.

To solve the problem, third-party utilities such as Display Tuner, MyMonic, Monitor Plus and their analogues are also suitable. Almost all monitors come with software that allows you to adjust all picture parameters. The same programs have a setup wizard that will help you make the picture optimal.

During the development of Windows 10, Microsoft redesigned the familiar display settings interface. It has become simpler, allowing users to make various settings intuitively. Determination of the optimal screen parameters occurs already during the installation of the system in automatic mode. It remains only to configure them for a specific user, if the need arises. The parameters set should correspond to the maximum capabilities of the display screen and video adapter. This achieves the clearest drawing of graphics and colors.

READ  How to make split screen on Windows 10


With a GeForce graphics accelerator and an Nvidia Control Panel installed (an application that comes with the graphics card driver), the contrast is easily changed. If you do not find such a program, download the graphics driver from the official website and reinstall it.

Open the context menu of the Desktop and select “Nvidia Control Panel” or double-click on the application icon in the tray.

On the left in the menu, expand the “Display” branch and go to the subsection “Adjusting desktop color settings”.

Move the switch to “Use Nvidia Settings”.

Set the optimal value with the slider, save the settings.

Disable screen off or dimming

With prolonged inactivity, the display screen goes out after a certain period, and after a few minutes the computer goes into sleep mode, completely shutting down. In the system parameters, you can set the option when the transition to sleep mode and screen dimming will be turned off. To turn off the energy-saving mode, you need to carry out a number of operations:

  • Left-click on the “Start” button.
  • Open “Options”.
  • Select the “System” section.
  • Click on the Power & Sleep icon.
  • Click the Advanced Power Options button.
  • In the “Power supply” window, click on the “Configure power scheme” button.
    Select “Customize Power Scheme”
  • In the “Disable display” line, turn off screen dimming when operating on AC or battery power. To do this, in the drop-down lists, select “Never”.
    Select “Never” in the drop-down list
  • Likewise, in the fields next to the “Put the computer to sleep” icon, disable the transfer of the computer to the off state.
    In the drop-down list, click on “Never”
  • Click “Save Changes”.

When working with a stand-alone device, we recommend that you do not disable screen dimming and sleep mode. Disconnection will lead to a faster discharge of the battery and, as a result, to a decrease in the user’s time with a laptop or tablet.

Change screen brightness in system settings

There are two ways to call the screen parameters:

  • First way:
  • right-click on an empty space of the “Desktop”;
  • click on the “Screen Options” icon.
    Click on the “Screen Options” icon
  • Second way:
  • left-click on the “Start” button;
  • click on the “Parameters” icon;
  • click on the “System” icon.
  • Open the “Display” tab.
  • Move the “Change brightness” slider to adjust the brightness level of the screen.
    Change the brightness of the screen using the “Change brightness” slider
  • After choosing the optimal brightness level, close the “Options” window.