How to Capture Screen Video on iPhone 5
Screen video recording using iOS
Starting with iOS 11, a built-in function for recording screen video appeared on the iPhone and iPad, however, a novice owner of an Apple device may not even notice it.
To enable the function, use the following steps (remember, you must have iOS version 11 or higher).
- Go to Settings and open the “Control Center”.
- Click “Customize Controls”.
- Pay attention to the list ” controls”, there you will see the item “Screen recording”. Click the plus sign to the left of it.
- Exit the settings (press the “Home” button) and drag the bottom of the screen: in the control point you will see a new button for screen recording.
By default, pressing the screen recording button starts recording the screen of the device without sound. However, if you use a strong press (or long press on iPhone and iPad without Force Touch support), a menu will open as in the screenshot, in which you can enable sound recording from the device’s microphone.
After the end of the recording (performed by pressing the record button again), the video file is saved in.mp4 format, 50 frames per second and stereo sound (at least on my iPhone this is the case).
Below is a video instruction on using the function, if something remains incomprehensible after reading this method.
For some reason, the video recorded in the settings was out of sync with the sound (accelerated), so I had to slow it down. I assume that these are some features of the codec that could not be successfully digested in my video editor.
3 Ways to Record iPhone and iPad Screen Video
If you need to record a video from the screen of your iOS device, there are several ways to do this. And one of them, recording video from the iPhone and iPad screen (including with sound) on the device itself (without the need to use third-party programs) appeared quite recently: in iOS 11 there was a built-in function for this. However, in earlier versions, recording is also possible.
This manual describes in detail how to record video from the iPhone (iPad) screen in three different ways: using the built-in recording function, as well as from a Mac computer and from a PC or laptop with Windows (i.e. the device is connected to a computer and already on it records what is happening on the screen).
How to Record iPhone and iPad Screen Video on Windows 10, 8 and Windows 7
Note: to use the method, both the iPhone (iPad) and the computer must be connected to the same network, it does not matter via Wi-Fi or using a wired connection.
If necessary, you can record video from the screen of your iOS device from a Windows computer or laptop, but this will require third-party software that allows you to receive broadcast via AirPlay.
I recommend using the free program LonelyScreen AirPlay Receiver, which can be downloaded from the official website http://eu.lonelyscreen.com/download.html (after installing the program, you will see a request to allow it to access public and private networks, you must allow it).
- Launch LonelyScreen AirPlay Receiver.
- On your iPhone or iPad connected to the same network as the computer, go to the control point (swipe from bottom to top) and click “Screen Repeat”.
- The list will show the available devices to which the image can be broadcast via AirPlay, select LonelyScreen.
- The iOS screen will be displayed on the computer in the program window.
After that, you can record video using the built-in Windows 10 screen recording tools (by default, you can call the recording panel with the WinG keyboard shortcut) or using third-party programs (see Best programs for recording video from a computer or laptop screen).
Screen Recorder in QuickTime on MacOS
If you own a Mac computer, you can use the built-in QuickTime Player to record video from your iPhone or iPad.
- Connect your phone or tablet with a cable to your MacBook or iMac, if necessary, allow access to the device (answer the request “Trust this computer?”).
- Launch QuickTime Player on your Mac (you can use Spotlight search for this), and then, from the program menu, choose File. New Video.
- By default, webcam recording will open, but you can switch the recording to the mobile device screen by clicking on the small arrow next to the record button and selecting your device. There you can also select the sound source (microphone on iPhone or Mac).
- Click the record button to start recording your screen. To stop, press the “Stop” button.
When you finish recording your screen, choose File> Save from the QuickTime Player main menu. By the way, in QuickTime Player you can also record Mac screen, for more details: Record Mac OS screen video in QuickTime Player.
Distribution of new, sometimes interesting and useful materials from the remontka.pro website. No ads and free computer help for subscribers from the author. Other subscription methods (VK, Odnoklassniki, Telegram., YouTube, Yandex.Dzen)
How many minutes can you record? Recorded the screen for 1 hour 50 minutes, and the recording did not come.
I don’t know for sure, but Google suggests that someone wrote down for two hours, i.e. most likely rests on the availability of free space on the device (sort of like 1 GB for 4-6 minutes, depending on the resolution)
Hello! I am making a screen recording with sound. Everything is preserved. Then I want to send via WhatsApp, telegram or email. it is sent without sound. Tell me, what is this problem and how to solve it? thank!
Identical problem. It would be interesting to understand why this is happening.
Thank you very much! I used to look and did not understand how people do this, but now I understood Thank you!
Very cool site, helped me figure out everything that interested me, explained everything verbatim, thanks!)
Video is recorded, but sound is not recorded. What to do?
Dear admin, thanks for the useful info! Tell me which iPhone model is the article talking about? I would like to know which iPhone writes stereo sound
I tested it all on an old iPhone 6 Plus. There were definitely two audio tracks, but now I can’t say for sure whether they are different or not (in my opinion, yes).
Can Track iPhone Screen Recording,
If I record?
Didn’t quite understand your question.
Good day. As soon as I turn on Sound Recording, the sound in the video is muffled (very much to barely audible). During playback, noise and sounds from the outside are heard, and the sound from the video is almost inaudible. What could be the problem?
Do you want to record a video with sound that is playing on your phone right now? He can’t do that. And when you turn on the sound recording, he writes from the microphone and the playback sound mutes, and what appears on the recording is what “got” into the microphone.
In general, it’s not easier to download a finished video somewhere without recording from the screen?
Hello. On this program from the iPhone The maximum video recording time is 2 minutes. Why is that? I would like to record a video up to 20 minutes long.
Perhaps these methods and computer recording will work?. https://remontka.pro/mirror-iphone-screen-pc-mac/
Thank you very much, otherwise you will look at these paid applications, plus everything with their cosmic-ebical prices.
Thank you for such people
Cool, thanks for the tips, in general, I really like your portal, everything you need and to the point.
For iPhone X
As a confirmation, the screen will blink 1 time, and in addition you will hear a characteristic sound. All screenshots are saved to the folder with your photos.
Now let’s look at the second way to take a screenshot.
Making a screenshot of the screen on the iPhone in 2 ways
Taking a screenshot on iPhone is easy. The smartphone itself already has this option, and the screen photo can be taken in 2 ways: by pressing the buttons and using the additional menu (the menu itself will not be visible in the finished screenshot).
Screenshots on the iPhone can be taken for almost any task: viewing SMS messages, on the main screen with application icons, and even during photo / video shooting.
Screenshot by pressing 2 buttons
You just need to press the lock key and “HOME” at the same time:
Screenshot via OSD
To display the menu, follow the steps:
7 Now we go to the place that needs to be filmed (for me, for example, it will be just the main screen with icons), then click on the menu icon, after which an additional menu will open.
For ready-made screenshots, you can make a beautiful frame in the shape of an iPhone. For this there is a free application called “Screenshot. Frame Maker”.
Making a frame for a screenshot in the “Screenshot. Frame Maker” program
After installing the program itself, we do the following steps:
3 A folder with your photos will open, where a ready-made screenshot should be located. We select it.
6 Now we choose what needs to be done with the finished screen. I chose “Save to photo folder”.
Never took a screenshot on an iPhone. Now I will know how to do it. It turns out. it’s not that difficult. I usually take screenshots on my computer. For this I have a special program.
Everything is so simple, but I was tormented)), before that I only had smartphones. Setting up with the help of hints is nothing complicated.
I take a screenshot of the video on iPhone 6. In addition to the lower and upper bands with the movie player, I have an entire black screen. What to do?
I just did a YouTube video screen and from the built-in camera. everything is fine. Also iPhone 6. Standard player?
IPhone iOS 11 Screen Recorder with Sound
In early versions of Apple’s iOS, it was not possible to record iPhone screen video, when you wanted to share what happened on your iPhone’s screen, you had one option. to click the screenshot. IOS 11-13 and higher have expanded the capabilities of the phone, providing you with an additional function not only to take a screenshot, but also to record video from the screen.
The meaning of screen recording should be obvious if you’ve ever had to troubleshoot someone’s iPhone. Instead of carefully describing each step, you can now turn on the screen recording function and share the resulting video. If you were looking for instructions for recording a screen on Android devices, I advise you to read the topic “How to record a video from the Samsung screen”.
Screen recording is also useful for exchanging game exploits or going through other interesting steps that screenshots simply cannot convey in full. If you do not like the standard screen recording function, read this topic “iPhone Screen Recorder with DU Recorder”.
To capture screen recordings, you first need to set up Control Center to get quick access to this feature.
Select “Customize Controls”.
Scroll down to the Ale. Controls “and find the option” Screen Recording “. (It has a red button icon with white circles in the center as a recording icon.)
Click the green plus icon to add it to your control center. You can use the three vertical bars on the right to customize where the Screen Recorder button will appear on your screen in your customized Control Center.
You are now ready to record everything that happens on your screen.
Swipe up from the bottom to the top to access the Control Center.
Click the Screen Recording icon. You will see a 3-2-1 countdown and then the icon will turn red. Everything that happens from now on will be recorded.
If you want to hear audio on your recording, you need to take an extra step. Press and hold the screen recording icon until the pop-up menu appears. Then you can click the microphone icon to unmute the sound.
Please note that this action will not only record the sound of what is happening on your phone, but everything that you say. You can click the Start Recording button on the pop-up menu to start timing 3-2-1.
Do whatever you want to record, be it a practice session or a game session. A red bar will appear at the top of your iPhone screen to remind you that your recording has started and is on.
To stop recording, swipe up from the bottom of the screen to access the Control Center and click the Screen Recording icon. It will turn from red to white.
A notification appears stating that your video is now stored in the Photos app. This video is ready to share, although it will look a little rough. For example, there will be a section of recording on and off in the Control Center. This probably doesn’t matter much to most people, but if you want to cut down on extra footage, it’s easy enough to do.
Select “Video” to go to edit the screen capture video you just captured.
Select the video you want and on the next screen click “Edit” in the upper right corner.
Drag the arrows at the bottom of the screen towards the center, left or right to set new start and stop points for the video. Click “Finish” when you are sure that you have selected exactly the part of the video that you need.
The clip will be saved as a new video, which can then be shared with friends, but without extra frames.
Screen recording on devices prior to iOS 11
All other smartphones (iPhone 5, 5c and below) that are out of service or “almost” out of service cannot be updated to iOS 11, and in previous updates there is no function for recording information from the display. Therefore, you can use an alternative solution. AirPlay technology.
With its help, you can wirelessly connect two devices: an apple phone and a Mac, and duplicate all information from a smartphone to a computer in real time. Naturally, programs that work with this technology can turn on the “Record” function.
You can choose a program to your liking:
- LonelyScreen AirPlay Receiver.
Let’s consider enabling screen recording using Reflector as an example:
- Download the app on the iPhone.
- Go to control center and select AirPlay.
Select the computer (on which the desktop version of the utility is installed) and enable “Video Replay”.
After the connection, a window will appear on the Apple PC displaying the iPhone screen. The “Record” button will also be available there. The program is available for Windows and iOS, but it is paid. There is a one-week trial period with the imposition of a watermark on the video.
Enabling Screen Recorder for iPhone with iOS 11 and Above
Any iPhone that supports the iOS 11 update (including iPhone 5s and above) is capable of functionally recording video from the screen. At the same time, there is a choice whether to record with the microphone on or without it. Where to enable screen recording:
- Go to Settings → Control Center → Customize Controls.
- In the list, find “Screen Recording” and by clicking on the plus, move this item to the “Enable” section.
- Next, go to the control center (swipe from the bottom screen) and open the Record widget that appears.
List of Apple phones that support iOS 11 and above:
- IPhone 5s.
- IPhone 6, 6 Plus, 6s and 6s Plus.
- IPhone SE.
- IPhone 7, 7 Plus, 8 and 8Plus.
- IPhone X, XR, XS, XS Max.
Instructions for enabling screen recording on iPhone
Screen recording is not very popular, but an important function, without which the smartphone seems incomplete. In this article, we will show you how to enable screen recording on iPhone running modern and legacy versions of the iOS operating system.
The time of crutches is long gone. In the version of iOS 11 for Apple mobile products (and for iPad too), it became possible to make a video from the screen in a standard in-system way. If you have an out-of-service device on your hands (7 or more years ago its production ended), we recommend that you do this using programs for duplicating information on a PC from a smartphone.
How to enable screen recording on iPhone
The need to record the screen on the iPhone does not arise very often. But, if such a need arises, then it is not so easy to implement it, because there are a lot of restrictions on Apple devices. Nevertheless, it is possible and now you will learn how to do it iPhone 4, 4s, 5, 5s, 6, 6s, 7, 8 and iPhone X.
Enabling Screen Recording on iPhone with iOS 11
If you have iOS 11 or a newer version of the iOS operating system, then you do not need Jailbreak and third-party applications to enable screen recording on iPhone. You can only record your screen using the built-in tools. To do this, open the iPhone settings and go to the “Control Center” section. Recall, “Control Center” is a menu that opens with a swipe from the bottom edge of the screen. There you can adjust the screen brightness, as well as other commonly used iPhone functions.
After you have opened the section with the settings of the “Control Center”, you need to go to the subsection “Customize controls”.
This will take you to a menu where you can customize which items will be available in the Control Center. Here you can add and remove items, as well as change their order. In order to be able to enable iPhone screen recording, you need to add the “Screen Recorder” element.
Now you can enable screen recording on iPhone. To do this, swipe up from the bottom of the screen to open Control Center. Then click on the screen recording button, which looks like a dot and a circle. As a result, a countdown will appear inside the button, and then the button will turn red, signaling that screen recording has already begun. To stop recording, return to the “Control Center” and press this button again.
Also, when you turn on screen recording, you can open a menu with additional settings. To do this, you need to press the record button and hold it down for a while. As a result, a menu will appear on the screen in which you can enable sound recording from the microphone.
After stopping recording, the resulting clips can be found in the “Photos” application in the “Videos” album. Using the “Share” button, you can send these videos from the “Photos” application to the cloud storage or by email. You can also connect your iPhone to your computer and upload videos directly, they will be in the same folder as your photos.
How to Record Screen on Old iPhones
If you have an old iPhone and cannot update to iOS 11, then you can use alternative screen recording methods. For example, you can record your iPhone screen using AirPlay technology. As you know, AirPlay allows you to transfer images from your smartphone screen to other devices. And if you transfer the image to a desktop computer, then it will be possible to record it already on the computer using any program. The only tricky part is getting the picture to be received with AirPlay. To do this, you need to install a special program on your computer. For this purpose, programs such as Reflector, AirServer or LonelyScreen AirPlay Receiver can be used on the computer.
MacOS users have another option. screen recording with QuickTime Player. To do this, you need to connect your iPhone to your computer and grant access to it by confirming the request “Trust this computer?” After that, you need to launch QuickTime Player, open the “File” menu, go to “New Video” and turn on “Record Mobile Device Screen”.
You can also record screen using iTools program. This program is a whole set of utilities for working with iPhone and other devices from Apple. Among its features is the function of mirroring the screen to a computer. To enable this feature, you need to open iTools, connect your iPhone via cable, and enable Real-Time Desktop in the Toolbox tab. After that, to turn on the iPhone screen recording, you need to click on the Record button.
How to record video from iPhone and iPad screen without jailbreak and computer
Every owner of an iPhone or iPad at least once had a need to record a video from the screen of the gadget. Before iOS 11, the whole process took a long time, as it required installing additional software or connecting to a stationary computer. In this article, we will talk about the existing methods of recording video from the iPhone and iPad screen without jailbreak and computer.
How to record video from iPhone and iPad screen
Open the Settings app on an iPhone or iPad with iOS 11 or later and select the Control Center section.
Go to the “Customize Controls” menu, select “Screen Recorder” and click on the green plus sign.
Starting with iOS 14, the “Customize controls” item has been removed and the controls are located in the main menu of the Control Center section.
Close the “Settings” application and call the “Control Center” by swiping up on the screen, after which a new icon will appear for recording a video of the screen. Long press (also works on iPhone 5s and iPhone 6) on the icon to bring up a menu that allows you to control the screen recording settings (for example, activate the microphone during recording).
Click on “Start Recording” and the survey will start. While the recording is in progress, you can safely use your gadget. Shooting will be indicated by a red strip at the top of the screen.
When finished recording, click on the red indicator, and then on the “Stop” button.
The video will be automatically saved in the standard library of the Photos application.
No ratings yet. Be the first to rate.
Thank! As always written in clear language.
But, friends, please, explain to me why this program is needed? Screenshot, still understandable, but video
Or am I missing something?
well for example, upload a video on YouTube, with battles on tanks or airplanes. it’s no secret that a “stub” is better than a “bucket” for online games ツ
there is an easier way: by connecting the device over a wire to MacOS and recording the screen through the QuickTime player
Friends, help with advice I can not download from the site, the download fails.
What to do?
Banned the program. At first I downloaded it, used it for a couple of days, and then the iPhone prohibits the launch of this program. Ales, again without screen recording, but to me it’s like a loaf.
It didn’t help at all, he says that you need to download a program for 12 dollars, if I click on no, I don’t want to download it, it just stupidly flies out. Help.
After installation, it shows that you need to install another program for this to work. She costs 12.
Good day to all. The wife of SE. Records video of the screen from some program through the “Control Center” and through a microphone. For some reason, the sound is barely obtained. I process it through Luma Fusion. Probably the program does not give access to the recording. If you do not write through the microphone, there is no sound at all.
What are you lying in the Control Center there is no item Configure controls in general, what can we say about recording screens, this is by the way ios 10 and methods with downloading applications from sites do not work at all, they do not even start loading and in the app store all applications for recording video from the screen are available only on iOS 11, at least some applications simply do not work because on 10 ios there is no screen recording function at all, so delete the article because of misinformation this site was given to me by Google when I wrote how to record a screen on an iPhone ios 10
AirShou installation instructions for recording video from the screen of apple gadgets
To record videos with AirShou, visit sites such as emu4ios.net or iEmulators.net. To install it on iPhone and iPad, select the “Install” button and confirm the download when the pop-up window appears.
When the application is installed, go to the “Settings” menu, select “General”, then “Profiles”. In the menu that appears, you need to find and click on “Suzhou Ding Chi Network Tech”.
For the full operation of the application, click on the “Trust Suzhou Ding Chi Network Tech” button and confirm the action.
IPhone and iPad Screen Recorder with Windows 7, 8, and 10
To use this method, it is necessary that the iPhone or iPad and the computer are connected to the same network, be it either Wi-Fi or a cable. The free program LonelyScreen AirPlay Receiver, which can be found on the official website, will be very convenient.
To record using this program, you must:
- On your gadget, which is connected to the same network as the PC, log into the control center and select “Screen Repeat”;
- A list of available devices will appear, in which you need to select the “LonelyScreen” item;
- After clicking on the computer screen, the screen of your iOS will be displayed.
- Now you can record a video using Win10 tools: if you use the standard method, call the recording panel using the WinG keyboard shortcut.
How to Record iPhone Screen Video with AirShou App
To start recording. on your iPhone or iPad, run the application.
At the first start, you need to give consent to the application to use the camera. Click “Agree”, after which the main menu opens, where we select “Record”.
Next, it is proposed to name the future video and select the desired resolution and screen orientation.
In order to record a video, in the “Available AirPlay Devices” menu, select “AirPlay Video Replay” and then “AirShou” with your specified iOS device.
To end video recording using the app, click on the Stop button.
You can watch the recorded video by clicking on the icon in the upper right corner of the application.
How to Record iPhone Screen Video
Sometimes there is a need to record video from a smartphone screen. Due to the peculiarity of Apple technology, many owners of such gadgets as iPhone and iPad face some difficulties in performing this task. IOS models up to version 11 required additional software or a PC connection to record video from the screen. In the proposed article, we will consider the main existing methods of recording video from the iphone screen.
What to do to record video from the iPhone and iPad screen on iOS 8, 9 and 10 without using a computer
- The first step is to connect your iOS 11 and below to your computer using a gadget and, if necessary, allow access to the device;
- Run the application on your computer, select “File” from the menu and then “New video”;
- Recording will start with the front camera by default, so you need to switch recording to the iOS screen. To do this, click on the small arrow next to the record button. In addition, the program allows you to change the sound source, which is supported even by iPhones of versions 6s, x, 6, 7;
- To start recording, click on the record button;
- The captured screen recording is saved in the “File” program, then “Save”
How to record video from iPhone or iPad screen on IOS 11 and above without using a computer
- You need to open the “Settings” menu on the specified gadget and select the “Control Center” menu;
- Go to the “Customize controls” section and select “Screen recording”, then click on the green plus;
A quick guide to enable iPhone 11 and iPad screen recording
- Now you should close the item “Night-time” and return to the “Control Center”. It’s very simple to do, you need to swipe up on the screen, where a button for recording a video will appear. By long pressing this button, you can call up a menu that will allow you to control the recording (pause the recording, turn on the microphone);
- From this menu, click Start Recording to start shooting. While recording is in progress, you can freely use the gadget. Shooting will be indicated by a red bar displayed at the top of the screen;
- To stop recording, tap on the red bar and select “Stop”;
- After recording, the video will be saved in the gallery.
An application from the creators of InShot, perhaps the most convenient video editor for Android. Allows you to shoot screencasts and screenshots in HD format, record video calls and watched streams. Nicely free: does not put any watermarks on the video, does not limit the recording time, does not require root.
Video can be exported with customizable parameters. from 240p to Full HD at 1080p, 60 frames per second and 12 Mbps. During the recording process, there is a pause, the ability to rotate the screen, a countdown timer. And the captured screencasts can be shared directly from the application on YouTube or Instagram.
How to record a screencast on iOS devices
In order to record video from the screen of your iPhone, you need to do the following. First, you need to go to “Settings” and open the “Control Panel”, then click “Configure Controls”. This menu will open:
Next, you should pay attention to the item “Screen recording” and press the “” sign to the left of it.
In order to drag the shortcut of an activated function to the main screen, press the Home button and drag the bottom of the screen. A button for creating a screencast will appear in the Control Center, after which it can be placed on the main display. The “Screen Recorder” button looks traditional: a dot in a red circle.
Pressing this button will start recording silently by default, but if you press and hold the button, a menu like this will appear:
In it, you can enable sound recording from the microphone of your smartphone. You can stop recording by pressing the function button again.
Perhaps DU Recorder. the most adequate program for recording video from the screen. It has a lot of advantages: here and completely free functions, and the absence of advertising, and video recording with high quality. The interface is localized into more than 20 languages - Russian is attached, of course.
So what can a program do? First, of course, she can record screencasts, and in various formats, different resolutions, bit rates. The program also supports HD video. The pause and resume function can be very useful. When using the program, you can choose where to save to the card or internal memory.
In addition, using the program, you can broadcast a video to YouTube, or Twitch, edit it, take screenshots and much more.
How to record video from smartphone screen: Android and iOS
Do you want to record the passage of a stage in a mobile game or webinar on your phone screen? We will tell you how to do it the easiest way.
iPhone 5, 5c, 5s: How to Screen Record & Use Microphone
To share the image on the smartphone screen, just take a screenshot. Sharing a video is a little more difficult. you need to record a screencast. But nothing supernatural: in the iPhone, this can be done using standard OS tools, Android gadgets allow you to use third-party software. We tell you how to act correctly on each of the platforms.
AZ Screen Recorder
And the third practically free program is AZ Screen Recorder. Does not require root, with minimal advertising and no restrictions on the duration of the shooting. It pauses and starts with one tap, can record various formats, including Full HD and QHD. You can also choose any of a variety of bitrates, resolutions, frame rates, force the program to count down, etc. The resulting video can be saved on an SD card or in internal memory, as it is more convenient for the user. The application, however, has various paid features: for example, creating a GIF, drawing on the screen, there is a button for managing records without logging into the application. These cute additions cost about 100 rubles.
How to take video from the screen of an Android phone, smartphone or tablet
From the screen of an Android phone or tablet, you can take not only screenshots, but also shoot videos. This is used to create training videos for users of all kinds of applications on a modern gadget. Writing and editing them is easy.
Screen Recorder is easy to set up. nothing more. But the full functionality is available only after purchasing the paid version.
Press the Start button to start shooting. Minimize the application. After 5 seconds, the recording of all your actions from the device screen will begin.
Screen Recorder functionality is the same for smartphones and tablets. At the first start, the program will ask for Root access.
By clicking on “Submit”, you will get access to the application settings and video recording.
Screen Recorder controls the bit rate, allows you to record sound, overlay an inscription on the video, minimizes without stopping recording, stops recording when the screen turns off, selects the codec (by default. AVI) and performs other equally important functions.
Recording is started by pressing the record key. You can view the recorded video by going to the saved videos tab.
Before viewing, you are prompted to select a player from the list of installed ones that support this video format.
Select any of the installed apps to view recordings
Screencast Video Recorder
Screencast Video Recorder came out shortly after the release of Android 2.2. Further development of the Screencast Video Recorder program, once begun with enthusiasm, has stalled. The Screencast Video Recorder project has been abandoned. But the program has a paid version. The program is not supported on devices based on the NVIDIA Tegra 2/3 processor and on the Galaxy Nexus gadgets. There is a transcoding of the captured video to MP4, taking screenshots of BMP, PNG and JPG.
The selected section and or submenu is marked with a “green crescent” on the toolbar of the main Screencast Video Recorder window. Shooting has a high frame rate. up to 40 frames per second. The video format is MP4. Press the capture key on the screen. and you can safely minimize Screencast Video Recorder by clicking on the “back arrow” at the bottom of the screen. The recording of everything you do with other Android apps will eventually be done.
Press the button on the screen and minimize the application
Unfortunately, Screencast Video Recorder does not have a button bar on the Android desktop. to stop recording, go back to the app and click on the stop recording button.
Saved videos can be found by clicking on the video tape icon.
Screencast Video Recorder has the same functionality on smartphones and tablets. The main menu bar on all Android devices with horizontal orientation of the gadget is located on the left, and with vertical orientation. at the top.
Saved videos can be transferred via Bluetooth to another device, saved on a computer, sent by mail or shared on social networks.
Choose where to send any of the videos
For the convenience of viewing the video, it can be optimized for the duration of the recording (time-lapse).
Shoot less, fit more events into your video
What ways are there
The first version of Android to support full-fledged video recording directly from the screen. 4.4.2 KitKat.
Comparison of screen video apps
The main parameters of each of the five programs described above, which are worth paying attention to, are shown in the table.
|AZ Screen Recorder||SCR Screen Recorder||Screen Recorder||Recordable||Screencast Video Recorder|
|Frame rate selection||Yes||Yes||Yes||Yes||Yes|
|Microphone sound recording||Yes||Yes||Yes||Yes||Yes|
|Optimizing the recording time (Time Lapse)||Not||Not||Not||Not||Yes|
|Delay before recording starts||Yes||Yes||Yes||Yes||Yes|
|“Sharing” recordings (function “Share video”)||Yes||Yes||Yes||Yes||Yes|
|Control Buttons Bar on Android Desktop||Yes||Yes||Not||Not||Not|
|The need for Root privileges on the device||Android versions prior to 5.x||Yes||Yes||Yes||Yes|
|Extended functionality availability||Everything you need for free||Paid||Paid||Paid||Paid|
How to get root access
Since most applications for recording video from the screen still require access to Root, you can use more than 20 “routers” applications available in the Play Market: Framaroot, Universal Androot, Visionary, GingerBreak, z4root, Baidu Root, ROMaster SU, TowelRoot, RootDashi, 360 Root, iRoot, RootTool, Stump Root, DingDongRoot, Poot, etc.
Everything is done simply. As an example, Universal Androot is taken on a budget smartphone with a small screen and not the latest version of Android. so that the owner has a complete understanding of the nuances of “rutting”.
- Download and install the application. When launched, it will “ask” what version of Android you have on your gadget.
Root access obtained. you can install third-party Android software
These applications are made as easy to use as possible. The ideal of rooting an Android smartphone or tablet is to get Root rights in one or two clicks. It often happens that one of the applications did not fit (“sharpening” for a narrow line of models of gadgets of certain brands). Try all “rutilka” until any of them works.
In the case of obtaining Root using a PC, the sequence of actions may be similar. The Kingo Android Root program is taken as an example.
- Download, install and run the program.
Allow installation of unsigned apps
Other applications for getting Root from a computer are RootkitZ, Root Wizard, Unlock Root Pro, etc.