How to change screen saturation on Windows 10
Change Windows 10 screen brightness in the Settings app
Options. This is a modern replacement for Control Panel, to change the screen brightness in Windows 10, follow these steps.
- Open Windows Settings by pressing the Win I key combination or click on the gear icon in the Start menu.
- Go to “System” → “Display”.
- On the right, adjust the “Brightness Change” slider to set the desired screen backlight level.
Change screen brightness in Windows 10 using hotkeys.
Some devices are equipped with keyboard function keys that allow the user to adjust the brightness of the display. For example, if you are using a laptop, it might have an Fn key. which, together with other keyboard buttons, can be used to adjust the screen brightness.
Look at the keyboard to see the brightness symbol on the function keys.
And if hotkeys to adjust brightness don’t work, please make sure the required display and keyboard drivers are installed.
Change screen brightness in Windows 10 using the battery meter
On supported devices in older builds of Windows 10, you can use the Battery Pop-up Menu to change the screen brightness.
- Click the battery icon in the notification area of the taskbar to open the battery pop-up window. It looks like this.
- Here you will find the brightness adjustment button. Press it to change the brightness level to the desired value.
7 Ways to Change Screen Brightness in Windows 10.
Published: 25 March 2020 Updated: 2 August 2020
Setting the screen brightness correctly is very important. If you do a lot of work on your computer, an incorrect screen brightness level can negatively affect your eyes or quickly drain your device’s battery if it is not plugged in.
Fortunately, Windows 10 offers several easy ways to quickly adjust screen brightness, unlike previous versions of Windows. Let’s take a look at them
Change the screen brightness using the Mobility Center.
- Press the Win X keyboard shortcut
- In the menu that opens, select “Mobility Center” Windows.
- Now use the brightness slider to set the desired screen brightness level.
Change screen brightness using PowerShell.
You can use PowerShell to change the display brightness level in Windows 10. Here’s how to do it.
- Open PowerShell.
- Enter or copy the following command:
Note: In the above command, replace the BRIGHTNESS_LEVEL part with a percentage between 0 and 100. For example, the command below sets the screen brightness to 100%:
Adjusting the screen brightness
After finding the desired settings, you need to take a blank white sheet of paper, put it in front of the monitor, create a regular blank document using the Notepad program and compare the color of the sheet of paper with the white background of the document in the program. This procedure is carried out to assess and then adjust the white color of the monitor. Further, for the slider responsible for the brightness of the picture, you need to find such a position so that the white color on the monitor matches the white color of the sheet of paper on the table.
How to adjust color saturation on Windows 10
Algorithm for changing the parameters of the conductor by means of “tens”
- We call the desktop context menu, select “Personalization” from the drop-down list of available functions.
The same can be done in a more complex way: go to “Start”, click “Settings”, and then. “Personalization”.
- We activate the “Colors” tab, which allows you to change the appearance of Windows 10 windows.
- Activate the option shown in the screenshot.
- Choose the color you like from a small list of suggested ones and save the new window decoration settings.
Keep in mind. When you activate the option to automatically select the main background color, Windows 10 will automatically select the color of windows and other explorer components (if the corresponding option is enabled), based on the gamut of wallpapers installed on the desktop. over, if the wallpaper is not static, the palette of the explorer elements also dynamically changes, based on the picture currently set as its background.
Change the color scheme of the “Taskbar”
To set your own color for the “Taskbar”, you need to go to the section:
Here we find the already known parameter called “ColorPrevalence” and enter its value equal to “2”.
Then you will have to restart Windows 10 or Explorer. We will choose the second option due to its simplicity. We start the “Task Manager”, on the “Processes” tab we find the element of the same name, call its context menu and select “Restart”.
In principle, all this can be done by the Winaero Tweaker utility, automating almost all the routine tasks of finding, creating and editing keys, so setting the color of the windows will take only a few seconds.
Configuring Start and Taskbar Colors
The current registry key contains several more keys that allow you to set the color of the “Start” and “Taskbar” without affecting the window design.
- In the “Color” tab of the “Personalization” menu, activate the option that is responsible for displaying colors in the start, notification center and taskbar.
- Switch to the registry editor and change the “ColorPrevalence” value to “0”.
As a result, the above elements will be painted in the color selected from the list, and the window titles will not change the color gamut, that is, they will remain as they were, even if their color value was entered manually, taking into account the RGB-BGR conversion.
Adjusting laptop color using intelHDgraphics application
But this is not the only way to solve this problem. For example, there is software that solves this problem more qualitatively. If the laptop runs on an Intel processor, then adjust the color through the “Graphic characteristics” section. You can get there with the help of the same pop-up menu called by the right mouse click. When you open the section, a window will appear with several categories responsible for the video card parameters. To adjust the color, select the “Display” category. There, in the “Color” tab, you can find the “Advanced” tab, in which the necessary color adjustment controls are located. The only parameters are hue and saturation, with the help of which the adjustment takes place. The level of increasing or decreasing values is determined by the user himself based on his needs.
Adjusting the laptop color using Windows
Laptops have long been an integral part of our life. It is enough to configure the laptop correctly once, so that later there will be no unnecessary problems and you do not have to spend extra time. The setting of the colors of the laptop monitor does not differ much from the settings of a regular monitor. They are located in the “Color Management” section of the Windows control panel. Having entered the section, you need to select the “Details” tab and then click on the “Calibrate screen” button. Then just follow the instructions provided by the setup wizard.
Set your own design parameters for the active window
If the proposed list does not contain a color that you would like to see in the title of windows, you can add it yourself, rather than use the 10 options that the developers offer.
- We start the registry editor by executing the system command “Regedit” in the search line or in the line of the command interpreter.
See : Easy Windows 10 Upgrade
- Find the first or one of the first keys called “AccentColor” and double-click on it.
- In the “Value” field, enter the color code in hexadecimal notation.
Such a code can be found using the appropriate online service for converting colors or using a utility, for example, Color point.
Surprisingly, instead of color encoding in this case, for some reason, BGR is used, and not RGB. This means that the first two characters in the code must be swapped with the last two. For example: you need to set the color code 65AD01. 65 swap places with 01 and enter the code “01AD65” in the “Value:”.
Immediately after clicking on the “OK” button, the new parameters will take effect without requiring the user to restart the computer or explorer. You just need to switch to a new window.
After turning off the option to change the color gamut of the window title, the key value will be reset, and the next time it will have to be re-entered manually.
Additional tools and utilities
It is not always advisable to use the tools of Windows 10 itself, despite the abundance of the proposed settings. If we are talking about graphics adapters, the options of which directly affect the graphics displayed on the screen of a laptop or desktop monitor, then it is better to turn to special utilities from manufacturers (for example, use Intel graphics control panels or programs like Catalyst for AMD video cards, etc.). ). In such control applications, there are much more options available for editing, which allows you to perform more fine-tuning for the personal needs of each user. In addition, the use of professional calibration utilities is not excluded, however, since we are talking exclusively about the means of the operating system, they were not considered. For an ordinary user, for the first time, what is.
Games do not open in full screen
Some games may open in a window by default instead of full screen. If you want to fix this, there are two ways. The first is to use the Alt Enter combination, which gives the command to stretch the active window to full screen, the second is to go into the settings of the game itself and set the value “Open in full screen mode”. Usually, the second method works one hundred percent, the game either opens immediately to full screen, or does it after restarting.
Turn on full screen mode in the game settings
Through power settings
Click on the “Configure Power Scheme” button
Adjust brightness in power options
Where are the monitor calibration settings
1 way. Since Windows 10 is updated and the location of the settings changes all the time, I decided to add two ways to enter the Monica calibration parameters.
- Open “Settings” and just in the search write “Calibrate monitor colors”.
- After opening a new window, go to the bottom method “How to adjust colors using the color calibration tool”.
Method 2. Right click on the desktop and select “Display Settings”.
In the window that appears, click “Advanced display options”.
So we come to the two parameters that we need: “Color Management”, “Color Calibration”. We will analyze these two parameters below in detail.
Through screen capabilities
Look for brightness control buttons on your monitor and use them to increase or decrease the light. But note, these buttons are not present on all monitor models. If not, use the methods described below.
Use monitor buttons to adjust brightness
So, a computer monitor can be customized by changing its extension, format, brightness, contrast and scale. If you are having problems with the screen, it is worth updating the drivers, checking the cable, or performing a calibration. The computer’s hibernation can also be configured or disabled.