How to change the monitor frequency of Windows 10

AMD driver

If you have an AMD graphics card, then changing the monitor frequency will be even easier. To do this, open the control panel for the AMD video card, go to the “Display” section and click on the “Create” button.

change, monitor, frequency, windows

This will bring up the custom permission creation screen. Here you need to change the refresh rate of the monitor and click on the “Save” button. This will create a new custom permission with the settings you need.

Then you just need to apply the created resolution and the monitor should work at the specified frequency.

How to change monitor frequency on Windows 10 or Windows 7

Many modern monitors support refresh rates above 60 Hz. For example, gaming models can support 120, 140, or 240 Hz. And some ordinary low-cost models can support 75 Hz, even if it is not officially announced by the manufacturer.

In this article, we will show you how to change the monitor frequency on computers running Windows 10 or Windows 7.

How to increase monitor frequency in Windows 10

Starting with version 20H2, a standard function for changing the monitor frequency has appeared in the Windows 10 operating system. In order to use this function, you need to right-click on the desktop and select “Screen Options”.

As a result, the “Parameters” window in the “Display” section should open in front of you. Here you need to scroll down the page and click on the link “Additional display settings”.

After that, you will be taken to the monitor settings page. Here you need to select a monitor and then specify the desired refresh rate.

It should be noted that changing the refresh rate of the monitor through the Windows 10 settings does not always work. Some monitors may support higher frequencies, but Windows 10 will only offer 50 or 60 Hz. In such cases, you need to use the methods for Windows 7, which are described below.

NVIDIA driver

If you have an NVIDIA graphics card, you can change the monitor frequency using the NVIDIA Control Panel program. This program is installed along with the drivers and can be launched by right-clicking on the desktop.

After opening the “NVIDIA Control Panel”, you need to go to the “Display. Change Resolution” section, select a monitor and click on the “Settings” button.

Then click on the button “Create custom permission” and go to the next step.

This will bring up the Create Custom Permission window. There are many options available here that relate to the display’s operation. For example, here you can create your own resolution, specify the color depth, as well as the refresh rate.

To change the monitor frequency, set the desired value in the “Refresh rate (Hz)” field and click on the “Test” button. The NVIDIA driver will try to apply the selected settings and if the monitor works fine, you will see a prompt to keep this resolution.

After saving, you will be returned to the NVIDIA Control Panel window. Here, in the list of available permissions, the new custom permission will appear.

Select this permission, click on the “Apply” button and confirm saving the changes.

How to increase monitor frequency in Windows 7

If you are using the Windows 7 operating system, then you can change the monitor frequency through the settings of the video card driver or through special programs. Below we will look at all these options.

CRU program

In addition, you can use the free CRU (Custom Resolution Utility) program to change the monitor frequency. This program allows you to create and apply custom resolutions with the required refresh rate.

This program must be downloaded, unpacked to any folder and run with administrator rights. After starting the program, first of all you need to select a monitor.

Then you need to click on the “ADD” button and create a new screen resolution that will use the monitor refresh rate you need.

After that, the created permission should be moved to the first position and the settings should be applied using the “OK” button.

To make the new resolution available, you need to reload the video card driver. To do this, run the program “restart.exe” with administrator rights, which is located in the CRU folder.

After restarting the driver, you can change the monitor frequency in its settings. To do this, right-click on the desktop and select “Screen Resolution”.

Then open “Advanced options” and go to the “Monitor” tab.

If you are doing this on Windows 10, then you need to right-click on the desktop, select “Display Settings” and follow the path “Additional display settings. Video adapter properties”.

Here you need to specify the frequency and apply the settings. After that, the monitor should work at the new frequency.

The creator of the site comp-security.net, the author of more than 2000 articles on computer repair, working with programs, setting up operating systems.

Thanks for the tip to the CRU (Custom Resolution Utility) program.
The task was to REDUCE the frequency in order to connect three monitors via Type-C.
As a result, we have 2 monitors 1920 x 1200 30 Hz and a monitor 3440 x 1440 30 Hz on one wire!

READ  How To Transfer The Game To A Second Monitor

Change monitor refresh rate in Windows 10

Starting with Windows 10 version 20H2 October 2020 Update, you can change the refresh rate right in the Settings app. The easiest way to get there is to first right click on an empty area of ​​the desktop and select Display Settings from the menu.

This will open the Display Settings section in the Settings app. Scroll down a bit and click on the “Advanced Display Settings” link.

In the Advanced Display Settings section, click the Refresh Rate drop-down menu and select the refresh rate you want to use for your monitor. Again, using the highest available refresh rate will give the best results.

If you have multiple monitors installed, be sure to select the one for which you want to change the refresh rate. You can find this above the Refresh Rate section of the Advanced Display Settings page.

Just like changing the screen resolution in Windows 10, Windows will test the new setting for 15 seconds. A message will appear asking if you want to save your changes or not. If everything is in order, click the “Save Changes” button. If you are not satisfied with the new look, click the Return button or wait for the seconds to count down.

2 min

Refresh rate is the number of times your monitor refreshes a new image every second and is measured in hertz (Hz). The refresh rate you can use depends on your monitor, screen resolution, and video card. Using a higher refresh rate can improve the viewing experience. Here’s how to change the refresh rate of your monitor in Windows 10.

Change the refresh rate on older versions of Windows 10

If you haven’t upgraded to 20H2 yet, you can still change the refresh rate of your monitor. You just need to look into another section of advanced display settings. If you have multiple monitors, select the one on which you want to change the refresh rate. In the Display Information section, click the Display Adapter Properties link.

This opens the legacy display adapter settings. Click the Monitor tab icon at the top. Then, under Monitor Settings, click the drop-down menu to select the refresh rate you want to use. Click OK and select “Save” or “Revert” depending on how everything looks.

When people were using CRT monitors and needed to get rid of flicker, adjusting the refresh rate was common. Now, with LED monitors, this is not such a big problem for the average user. However, if you are a gamer or video editor and have the right hardware, adjusting the refresh rate will smooth out the image and improve the overall viewing experience.

How to change the screen refresh rate (Hz) in Windows 10

This article shows the steps you can take to change the screen refresh rate (Hz) in the Windows 10 operating system.

Screen refresh rate. a parameter that determines the number of frames per second that the monitor can display.

The screen refresh rate is measured in Hertz (Hz Hz). When using a higher refresh rate, the image becomes clearer, which leads to less strain on the eyes.

Available screen refresh rates depend on the monitor, its driver, video card driver and the set screen resolution

How to change the refresh rate of the screen in Windows 10

To change the screen refresh rate (Hz), open the Settings application by clicking the Start button on the taskbar and then select Settings or press the key combination I.

In the “Parameters” window that opens, select the System category.

Select the Display tab, and on the right side of the window, click on the Advanced display settings link.

In the “Advanced display settings” window, click on the link Video adapter properties for the display # (if you have multiple displays connected, then click on the link for the display you need).

In the window that opens, go to the Monitor tab, in the Screen refresh rate drop-down list: select the required screen refresh rate and click OK, after that the monitor will turn black for a couple of seconds.

Then confirm the selected refresh rate by clicking the Save changes button.

You will have 15 seconds to save or discard changes, otherwise the old display settings will be automatically applied.

You can also change the refresh rate of the screen along with changing the screen resolution, to do this, on the Adapter tab, click the List of all modes button.

In the List of all modes window, select the required refresh rate along with the screen resolution from the list of available modes and click the OK button.

Then in the properties window of the video adapter click the OK button, after that the monitor will turn black for a couple of seconds.

Then confirm the selected screen resolution and refresh rate by clicking on the Save changes button.

You will have 15 seconds to save or discard changes, otherwise the old display settings will be automatically applied.

Using the steps above, you can change the refresh rate of the screen in the Windows 10 operating system.

READ  How to remove graininess on your monitor

Properties System Settings

Go to Settings System Display and find Advanced display settings. They brought the ability to change the Screen Refresh Rate.

You can select Monitor directly in the properties of the video adapter. Expand the list of frequencies, change it to the one that suits you. In general, herzovka affects the quality of the gameplay.

It is enough to select the desired value (it is better to set the maximum supported value of the monitor’s hertz setting) and apply the changes. The refresh rate value changes without the need to restart the PC. In the window, confirm your intention to save the frequency.

How to change the hertz of the monitor Windows 10

The refresh rate indicates the maximum number of frames per second the monitor can display. It is under the value of the hertz of the display that its refresh rate is meant. Use Recommended Resolution and Optimum Refresh Rate.

This article will show you how to change the hertz of your monitor in Windows 10. High frame rates provide smoother motion but more power consumption. In games, enabling Vsync adjusts the frame rate to match the monitor’s refresh rate.

AMD Radeon Software

In the drivers of red graphics cards, you can no longer simply select the desired hertz value among the list of available modes. Although it is possible to create a custom resolution with the required refresh rate. Create a profile and apply its settings.

Added. In the new AMD Radeon Software Adrenalinn, the interface has been slightly modified. You need to go to Settings Display and click Create next to Custom Permissions. In the next window, specify the Update frequency and click Create.

In Radeon Settings, expand and select Display Custom Resolution Create. Enter a value for the Screen Refresh Rate (Hz), and click the Save button.

Without the need, it is better not to overclock the monitor’s hertz. Often it turns out to raise the frequency by a few percent. My Samsung S24B350 monitor easily takes 75 Hz (although the manufacturer claims 60 Hz). See: How to Overclock Your Monitor to 75 Hertz.

NVIDIA Control Panel

In the classic NVIDIA Control Panel, you can also change both the monitor resolution and the refresh rate. In addition, the proprietary software allows you to create your own profiles with manually specified settings (create a custom permission).

Navigate to the control panel location Display Change Resolution. Expand the Refresh rate list and select the required display hertz value.

How to change the refresh rate of the screen

The refresh rate (hertz) is the number of frames displayed per second on the screen. The higher the rate, the more frames the monitor displays. Actually, this results in a smoother picture. For example, a 60Hz monitor displays 60fps.

Intel HD Graphics Control

In the Basic settings section, just select the Refresh rate value. After applying the changes, the screen will go out for a moment and will already work at the selected frequency.

Use not only the recommended resolution, but also the maximum refresh rate. You can change the hertzka (refresh rate) of the monitor using Windows 10. If the selected resolution is less than the real one, this will have a bad effect on the image quality.

Which refresh rate to choose. Gaming monitors are available at 144 and 240 Hz. For gaming, the higher the refresh rate of the display, the better. I use a 60 Hz monitor with overclocking to 75 Hz. Of course, I would like a monitor with a larger hertz, as it happens sometimes I play.

Setting the resolution and refresh rate of the monitor screen in Windows XP

We right-click on an empty spot on the monitor screen (i.e., not on an open window of any program and not on an icon). The context menu opens:

In the Display field you will see the name of your monitor and the model of the video card. And below is the Screen Resolution, which you can change if you want. Typical, standard resolution is shown in the table:

Screen size in inchesScreen resolution in
pixels
15 “CRT monitor800 x 600
17 “CRT monitor1024 x 768
19 “CRT monitor1280 x 1024
17 “- 19” LCD monitor1280 x 1024

But for LCD monitors, you need to set only the native resolution, no more, no less. Otherwise, the image looks blurry, the color rendition is distorted, the work on such a monitor does not give any pleasure.

I first bought a 17 ”LCD monitor, but working at a resolution of 1280 x 1024 was terribly uncomfortable for me. In the eyes rippled, this spoiled the mood. Therefore, after suffering for a week, I exchanged that monitor for a 19 ”LCD and was pleased with the result. Frankly speaking, the 17 ”LCD is only suitable for games. Such a toy is not suitable for serious work of adults.

But there is more to come on this tab. There is also an Advanced button

Click it and a window with the properties of the monitor and video card opens in front of us. These windows may differ depending on the video card. What to look for on the General tab. The default scale here is 96 dpi. This is the usual size. Let it be so.

READ  How to Change Screen Resolution on Samsung

But below, note that the toggle button (the so-called radio button) should be in the following position:

After changing the display parameters, you should:
Apply new display settings

Otherwise, if you change the screen resolution or color quality (and sometimes you have to), then the computer. You need it?

Go to the Monitor tab This tab contains the most important monitor parameter. the screen refresh rate. I have 60Hz, which is the norm for an LCD monitor. But, if you have a CRT monitor and the frequency is the same, then this is awful! Your vision is in danger!

Actually, such a frequency can be found without looking at the display parameters. To do this, turn sideways to the monitor and look at the screen with your peripheral vision. If you see the screen flickering, then the monitor is time for a landfill (its frequency is 60-70 Hz).

Although, first open and look at the Monitor tab. Perhaps no one has set the correct refresh rate.

First of all, check the box “Hide modes the monitor cannot use“. And from the remaining digits, choose the maximum value. For LCD, I chose the recommended. 60 Hz. And for a CRT monitor, it must be at least 85 Hz.

If in the position with “Hide modes that the monitor cannot use”, the maximum value is 85 Hz or more, then you are setting this value and you can still work with such a monitor. If the maximum frequency that the monitor can use is less than 85 Hz, then such a monitor is really time for a landfill, because vision is given to a person only once and you don’t want you to be excruciatingly hurt later for aimlessly lost vision (I paraphrased Ostrovsky).

Personally, I immediately felt with my own eyes when the frequency went astray for some reason. Then I opened this tab, set the frequency to 90 Hz (for my monitor it was the maximum) and my eyes immediately felt comfortable.

So, you press the button and select the desired frequency from the list, which in most cases is in the range of 85-100 Hz.

Now click the Apply button and then OK.
Before clicking OK, I want to say that the rest of the tabs are not as important as the ones discussed. You can watch them, but you do not need to change anything in them.

Setting the refresh rate of the monitor screen in Windows

December 25, 2019 at 04:25 PM. Last update

It is important that your monitor has the correct screen resolutions and refresh rate. At the same time, on modern LCDs. TFT monitors resolution should be the recommended resolution for this monitor, otherwise the image quality will be poor.

But, for old CRT monitors, such a parameter as the Screen Refresh Rate is important. If you have a CRT monitor and you want to preserve your vision, then you must constantly monitor this parameter (because sometimes the settings spontaneously go astray).

Setting the resolution and refresh rate of the monitor screen in Windows 7

To check what parameters are set on your monitor, and, if necessary, change the resolution and refresh rate of the monitor screen in Windows 7., you need to right-click on an empty spot on the monitor screen (i.e., not on an open window of some program and not on the badge). Click the link Screen resolution. The Display Settings tab opens. On the tab, we see the resolution set on this monitor. If (recommended) is written next to this permission, then the resolution is set correctly. Otherwise, you need to install
recommended resolution. (see above why you need to set the recommended resolution on LCD monitors)

The refresh rate of the screen is not that important if you have an LCD monitor. If you have an outdated CRT monitor, then the screen refresh rate must be checked. To do this, click the link Additional parameters.
Fig. 7

In the window that opens, click the Monitor tab and see the refresh rate of the screen of this monitor. In order not to repeat itself, see above What should be the refresh rate of the screen

| Contacts | Content | RSS