How to connect a dandy to a modern Samsung TV

Installation and connection to modern TVs

Despite the fact that at the moment almost everyone has their own personal computer and emulators that are currently popular, nevertheless, sometimes many have nostalgia for consoles from the 90s. This also applies to Dandy.

connect, dandy, modern, samsung

In order for the connection of the set-top box to be successful, you must first prepare several devices, such as:

  • Power Supply;
  • joysticks for one or more people;
  • AV cable (so-called tulip);
  • special adapter.

It only takes a few minutes of free time to connect the gaming console directly to the receiver itself. In this case, the installation scheme can be varied. It directly depends on what type of cable is used. It can be as follows:

  • AV cable;
  • satellite antenna cable.

Since a large number of Dandy models were produced, their kits could be different. In some, a connection cable was present, in others, it had to be purchased additionally.

Using an adapter

If the interface of a modern TV is in the form of a comb, you will need to use a special adapter. On the one hand, it consists of a cord with 3 wires, on the other. a SCART connector.

It is imperative to pay attention to the fact that the signal transmission of the IN type must be set on the adapter. Otherwise, the device may not transmit the game image you need to the TV screen.

You can connect the adapter with 3RCA and SCART connector to your TV and set-top box in just 1 minute. After that, it will take no more than 2-3 minutes to complete the remaining tasks required before starting the game process.

Antenna cable connection

Not all Dandy set-top boxes can be connected to modern TVs using an AV cable. In such cases, a normal antenna cord should be used. This method has a number of disadvantages that must be taken into account. Among them, experts distinguish the following:

  • poor quality of the displayed image;
  • difficulties in setting up a TV, regardless of whether it is old or modern.

Connecting and configuring Dandy using an antenna cord occurs according to a certain algorithm of actions. It involves the following steps:

  • Connect the two devices with an antenna cable.
  • Turn on the set-top box and install the cartridge in its place in the slot.
  • Turn on the TV and adjust its settings by searching for new channels.

If all the above steps are performed in the correct sequence, a corresponding connection is formed between the Dandy set-top box and the TV. Then you can enjoy the installed game.

It is also worth paying attention to some of the nuances that Honor needs:

  • When performing any manipulations with the antenna cable, you should make sure that all devices. both the set-top box and the TV. are disconnected from the mains.
  • If during the implementation of the setting, the game image periodically disappears on the screen, you should check the cable connection.
  • In the absence of color rendition, be sure to once again make sure that the cord is connected securely or repeat the settings made earlier.

Thus, if everything is done in accordance with the instructions, connecting Dandy to the most modern TV is not at all difficult.

Connecting to an old TV

In order to understand what are the features of connecting Dandy to old TVs of different models, you need to pay attention to the following nuances:

  • Samsung. Many users have difficulty connecting the console to this particular TV model. This is due to the fact that on some of them, instead of the standard yellow and green inputs, you need to use white and yellow. To connect to them, you just need an adapter with 3RCA. Without it, in some cases, it is not possible to connect the set-top box.
  • LG. The video cable should be connected to the TV of this manufacturer with an A / V to HDMI converter. Thus, you can connect and configure Dandy on an LG TV without any difficulties and problems. It should be noted that such a connection allows you to achieve a high-quality picture on the screen.
  • Philips. The TVs of this brand compare favorably with many others. This is due to the fact that they have standard inputs. white and yellow. The configuration of these devices is carried out using the remote control. To do this, you need to press the “Input” button.

It is even easier to connect the Dandy set-top box to an old TV than to a new one. This process takes no more than a few minutes of free time.

Instructions for connecting Dandy to modern TVs

Games have long been an integral part of the lives of many people, both children and adolescents and adults. A significant transformation with them took place in the 90s of the twentieth century. This was facilitated by the emergence of mass access to a variety of consoles. One of the most popular among them was Dandy. Due to the fact that this console is more than 20 years old, its connection to modern televisions causes certain difficulties. Before starting this process, you should first understand about all the problems that you will have to face. This is what will be discussed later in this article.

AV cable

In order to connect the set-top box to the TV, you need to figure out which cable you need to use. To do this, you need to inspect the rear panel of the device. If it has 3 round red, yellow and white inputs, use an AV cable. It is often called a tulip due to the appearance of this cord. Structurally, such a cable consists of three branches. They are designed to transmit video and audio.

READ  How to clean phone memory Samsung j5

Despite the fact that almost every old TV was equipped with AV cable inputs, many modern models also retain this feature. In order to connect the set-top box, you need to follow the following procedure:

  • connect the RSA Jack cable to your TV and set-top box;
  • insert the game cartridge into the console;
  • connect the power supply to the mains;
  • start the selected game;
  • switch channel to AV.

After completing all the above actions, the logo of the game itself or the company that is its manufacturer should appear on the TV screen.

A distinctive feature of the AV cable is that it allows you to clearly transfer the picture to the TV screen. Antenna cables sometimes do not cope with this task at the proper level. In addition, setting up a set-top box using an AV cable is much easier and faster.

How to connect Dandy to an old TV

Most older TVs have an AV output, so you only need a compatible AV cable to connect. Before connecting the dandy to an old TV, you must switch it to the appropriate video input (usually using the INPUT or Source button on the remote control).

If there is no AV, then an RF cable is used, which is connected to the TV antenna input. Next, you need to turn on a free channel and search for a signal. This option is suitable even for old black and white TVs, but the picture quality will be lower than with an AV connection (lower sharpness, the picture is a little blurry).

Installation and connection to modern TVs

In the Dandy prefix, which were supplied to the territory of the USSR by Steepler, there were only two options for displaying the image:

  • via AV-out (popularly known as “tulips”);
  • via the RF port (antenna cable, after such a connection, it was still necessary to search for the signal on the TV itself).

The RF signal is not recognized by modern televisions at all, since television has been broadcast in digital format for more than 5 years. Therefore, figuring out how to connect the old Dandy to a modern TV, it remains to consider the option using an AV signal.

REFERENCE! Antenna cable connection is allowed via an external signal converter. They can be T2 set-top boxes. After connecting Dandy to the receiver, the latter needs to search for a signal. But the final image quality will be lower than when using AV.

The AV standard is considered obsolete, but it is still found in some modern TVs, for example, Samsung, LG, Philips, DEXP, released before 2017. A feature of the standard is an analog signal. The image is now displayed in “digital”, so a compatible TV must have a digital-to-analog converter (DAC), which manufacturers massively refuse (this makes production cheaper).

So, the easiest way to connect Dendy to a new TV is via an AV cable. The game console has 2 ports for this. VIDEO and AUDIO. If the cable used has 3 “tulips”, then only 2 of them are connected: yellow (responsible for video) and white or red (stereo sound is transmitted through them, but Dendy only supports mono sound, so there is only one audio input). In the settings of the TV itself, it is recommended to also enable sound output in mono format (otherwise only one speaker plays).

If the new TV does not have an AV input, then the problem can be solved by the following methods:

  • Using an adapter. You will need one with an AV input and an output for any compatible port. It can be SCART or RCA-composite (visually. the same tulips, but there are 3 inputs for the video signal).
  • Using an external converter. Their input is AV, and the output is HDMI, VGA, DVI or DP (DisplayPort). Such devices have a built-in signal converter from analog to digital and they are quite expensive (from 500 rubles on average).

IMPORTANT! Before connecting Dendy via HDMI to both the TV, the set-top box and the converter itself, you should completely disconnect from the power supply. Otherwise, you can disable the GPU of the TV.

One more nuance: Dendy is designed to output images in 4: 3 format, while new TVs are produced in 16: 9 format. This may cause the picture to be stretched horizontally on the TV screen. You can get rid of this by setting the signal output to 4: 3 in the TV settings (there will be black bars on the sides of the picture, but the gameplay elements themselves are not curved).

Now on the same Aliexpress, Dendy of modern production is actively sold. They are originally designed to work with new TV and LCD monitors, so they integrate HDMI or DVI output (the converter is inside). When connecting such set-top boxes in the Smart TV settings, you just need to select the correct sweep frequency (1080 p 50 Hz or 720 p 50 Hz). Samsung TV can also enable progressive scan. this will slightly improve the image and reduce pixelation.

How to play Dendy on a modern TV. connection and setup

The Dendy game console is a clone of the Japanese Famicom console, produced from 1983 to 1995 (in America it was called the NES). This set-top box was designed for use with CRT TVs, which were common in the 80s and early 90s. There were no HDMI, VGA, DVI ports at that time. Therefore, it is not so easy to connect Dandy to a modern TV.

How to connect Dandy to a computer monitor

All monitors are designed to work with digital images. They only output analog via VGA or DVI output (corresponding to specification). Therefore, a converter is indispensable. The first step is to clarify what inputs are available in the monitor. It is recommended to use HDMI, if not, VGA. Next. purchase a compatible video signal converter (from AV to HDMI or VGA).

After connecting Dandy to the monitor, you need to manually change the display resolution (through the settings of the monitor itself). It is recommended to select the lowest value, the frequency is 50 or 60 Hz. The game console itself outputs a video signal at a resolution of 256×224 (for the early 90s, this was considered acceptable).

So, it is quite possible to connect Dendy to modern TVs, but you may need to use a converter or adapter. Seasoned gamers argue that the best option is to buy an old TV with AV-input, they now cost up to 1000 rubles. There are no problems connecting to them, well, and the very process of the game it gives a certain authenticity. If you have experience with connecting Dendy or similar set-top boxes to new TV, share this experience in the comments. Retro gaming is trending right now, so there should be a lot of connoisseurs of old school games.

Features of connecting a dandy to modern TV

Compared to the old model of the device, the modern game console is a high-performance computer. The latest consoles for games are offered on the modern market:

  • with the most realistic graphics;
  • with believable characters;
  • with incredible musical accompaniment.
READ  Samsung scx 3200 how to scan

Today’s gamers have a huge selection for games. “Dandy” can be attributed to the outdated model, which is still in demand today. The set-top box, joysticks were not of particular interest without the presence of cartridges, which served as information carriers. The most popular variants were those in which there were from 3-10 different games. Teenagers and children often exchanged, bought, sold cartridges among themselves. The devices could easily be connected to old TVs. In past years, all TV models did not have the necessary connectors to connect a device.

Modern TV options differ from outdated options not only:

  • appearance;
  • design;
  • but also the design.

How to connect a dandy to a modern TV? If you need to connect the Dandy device to a modern TV, then this can be done quickly and easily. Despite the fact that “Dandy” is one of the outdated versions of the game console, some people prefer to play on such consoles. Due to the presence of a large assortment of high-quality, interesting games, these devices are still in demand and are of interest to many children and adults.

Reference: Currently, modern manufacturers most often produce TV models that do not have special connectors, because modern devices are equipped with a high-definition interface.

How to connect dandy to Samsung TV

To connect “Dandy” to TV, just connect the a \ v plugs of the set-top box, TV, then you can start looking for the channel.

Important: On the official website of the manufacturer “Samsung” you can find out more detailed information on how to configure the TV of this model to receive a signal from an outdated console. To do this, you can use yellow-green inputs instead of white, yellow. For these purposes, an adapter with 3RCA, SCART is required.

How is the connection to LG models

How to connect a dandy to a TV?

Important: If you want to connect this device to LG models, then first, you need to make sure that the set-top box is disconnected from the power supply.

Then, using a cable, connect the set-top box to the converter. Also, the converter can be connected to TV using. HDMI. After that, you can:

  • insert a cartridge with a game into the console;
  • connect to the electrical network;
  • turn on the game.

In order to find the right game, you may need to search for channels to find the right wave. LG provides an opportunity for all players of older consoles to play them using this TV model. To connect the device, you will need a video cable, which, on the one hand, will be connected to the console itself, and on the other, to the A / V to HDMI converter.

How to connect a dandy to a modern TV

The game is an integral part of many people and teenagers, children. About 20 years have passed since the first variants of game consoles appeared. To date, the Dandy consoles remain in demand both for children and for many adults.

How to connect to Philips TV

Philips TVs have standard white and yellow outputs, so it won’t be difficult to connect a TV. If you press the “input” key, you can make your TV set to AV mode on the remote control. TV models have a “Sours” button, then “Input”.

Game consoles “Dandy” are still very popular with many players. The following games: “Mortal Kombat”, “Super Mario”, “Pakman”, “Tanks”, “Adventure Island”, as well as others, are popular to this day. They are interesting and original, despite the outdated model of the console.

Connecting Computer to Samsung Smart TV

Last updated on July 21, 2020 12:58 PM. David Webb.

This article explains how to connect your computer to your Samsung Smart TV. This will allow you to mirror any media stored on your computer. Samsung Smart TV is DLNA compliant. therefore, you should configure your computer to act as a DLNA server. To complete the connection, all you need is the All Share app. which is set by default on your TV and also a good WI-FI connection.

How to connect any phone or tablet to your TV using USB

Connecting your phone to your TV is not as easy as you might think. Whether you want to enjoy Netflix, share photos, or use it to work at home, connecting a cable between your phone and TV can be tricky.

But this is not impossible. it’s all about choosing the right cable.

Here’s what you need to know about how to connect your Android or iOS phone or tablet to your TV using a USB cable.


The TVs of this company have standard white and yellow outputs, so it is not difficult to connect a set-top box. Switching the TV to AV mode is carried out by pressing the “Input” button on the remote control.

On some models, you will need to press the “Source” button and then “Input”.

Why use USB to connect phones, tablets and TVs?

With the simplicity and prevalence of broadcasting to wirelessly mirror your phone screen, you might be curious as to why you should use a USB TV connection for your phone.

If you connect your phone to your TV via a wired connection, you get a low latency signal. For example, if you plan on mirroring your phone to your TV for gaming, you will need a USB connection rather than a wireless configuration. This greatly reduces latency.

Plus: In situations where you have no Wi-Fi or a weak wireless signal, you will need a wired connection.

To connect your phone or tablet to your TV, you can use one of the following methods:

Start by connecting the SlimPort adapter to your phone, then connect the SlimPort adapter to the display using a suitable cable. You will then be able to view your phone screen on your TV. Like MHL, it’s plug-and-play.

Connecting phones, tablets and TVs via USB: success!

Although the USB connection to your TV varies by device, connection type, and display inputs, it is fortunately easy to set up, but keep in mind that wireless streaming is usually more convenient.

Whether you are using an Android, iPhone, or Samsung device with DeX, there is a way to connect your phone or tablet to your TV for big screen viewing.

To find out more, check out our essential list of screencasting methods.

How to use audio therapy as part of your meditation practice

Are you trying to reach the desired depth of meditation? Audio therapy may be the answer.

about the author

Deputy Editor for Security, Linux, DIY, Programming and Technical. He also publishes The Really Useful Podcast and has extensive experience in desktop and software support. Written for Linux Format magazine, Christian. Raspberry Pi master, Lego lover and retro gaming fan.

Quick Start Guide for Connecting Devices to QLED TV | blog | Samsung country code

When installing a new TV, connecting all peripherals and devices can be a real problem.
First you have to dig behind your TV to find ports, and then you have a bunch of cables wriggling around in the back. Hurrah! Let’s talk about a dust magnet. And this is not even the worst thing! When you’re done connecting everything, you have to remember which port you connected each device to it’s a nightmare! Well, with QLED TV, there are simple solutions to these problems, which means that it is very easy to set up your TV. Read on to learn how to connect various devices to 2017 Samsung QLED TVs

READ  How to make black Instagram on Samsung

USB to TV: Connection as Mass Storage

While screen mirroring is the most common option for connecting your phone to a TV via USB, there is another option: Instead of screen mirroring, you can also simply view files, such as pictures, on the TV.

However, this requires a compatible monitor, TV, or projector. Most modern displays should accept USB sticks.

Of the various USB to TV connectivity options, this is the easiest, and since it only requires a phone, USB cable and USB TV, it’s easy to set up. Which cable you need depends on your phone.

On iPhone or iPad, use a Lightning cable (or 30-pin for older devices); alternatively, Android users will need a micro-USB or USB-C cable. The USB cable that came with your phone or tablet should work fine.

How to connect Dandy to TV

Above, the process of setting up equipment with televisions of past generations was described. Modern manufacturers such as LG are increasingly eliminating A / V output from their latest models.

Therefore, owners of plasma TVs may face the problem of connecting a dandy. Do not despair, because after the release of a special adapter from HDMI to A / V, this problem was eliminated.

LG keeps up with the times, but does not forget about old technologies. In order to enjoy games on a dandy, you need a video cable, connected to the console itself on one side, and to an A / V to HDMI converter on the other.

This device will amplify the video signal of the game and make it recognizable for a modern TV.

How to connect Dandy to a modern TV

We all loved to play video games in childhood, and every teenager knows the names of the Sega, Playstation 3, 4 and its predecessors. We exchanged Sega cartridges and disks with friends, argued over the possession of the main joystick, and these consoles will forever remain in our memory.

But before their appearance there was the Dandy Junior prefix, which has truly become legendary. It released such cult games as Mario, Mortal Combat, Contra and many others.

Children of the 90s spent hundreds of hours in front of TV screens, over and over again passing the levels of their favorite games. Therefore, for those who in childhood were lucky enough to become the owner of the Dandy prefix, it evokes vivid nostalgic emotions.

Easier than sending text: connecting mobile devices to QLED TV

Connecting the phone to the TV. a good way to show content on a big screen for more people to see! If you find a funny video on the Internet that the whole room should see, or if you’ve just returned from a trip and want to show off your photos by sending it to the TV, it will be easier for your audience to see it! Plus, you can impress them by showing off your technical skills, right? Except it really doesn’t require any special skills, it’s incredibly easy. How? Well, with QLED TV, all you need is the Smart View app to connect your device. † You can then send videos, photos and streaming content to your TV with one touch. No, seriously, that’s all. But we will keep your secret.

How to connect a dandy set-top box to a Samsung TV

Arrow. You are connected. What now?

QLED TV not only makes it easy to connect with Invisible Connection and One Connect Box, it also features auto-sensing, which means whatever you plug in will automatically appear on your TV screen. No more guessing or looping through every HDMI port to find what you are looking for. Just select it from the menu, because QLED TV tells you what’s where. Not to mention, Invisible Connection only allows one Samsung Smart Remote to control each device. that’s why we call it One Remote Control. ‖ No more button presses and no more reaction, because this is the wrong remote. QLED TV makes it easy to set up your TV and jump straight to your entertainment.!

How to Connect Old Consoles to a New 4K SmartTV

Topics: QLED TV, Samsung TV 2017, How to connect phone to TV, how to connect Xbox to TV, how to connect laptop to TV, how to connect DVD player to TV, Samsung Smart Remote, Samsung TV one connect box


Owners of Samsung equipment may experience connection problems and no signal. The company has long known the problem of connecting a dandy and a solution has been found.

The official Samsung website has published how to set up the TV to receive a signal from the old console. This will require using the yellow-green inputs instead of the accepted white and yellow. This requires an adapter from 3RCA to SCART.

How to set up your Samsung TV and set-top box!

You just plugged in your new Samsung TV and you just can’t wait to start watching your favorite program or playing games. before that we need to set up the TV and set-top box.

Here’s a simple step-by-step guide on how to do it:

On the plus side, you can also customize your TV using your phone via the SmartThings app:

Finally, if you need to pair your Bluetooth Smart Remote: Press and hold the Play / Pause and Return keys at the same time while aiming the remote at the Samsung logo on the TV.

Sound card configuration

Your new TV should start working immediately after installing the software. But there can be some problems and you can dig a little in Windows to get it working.

For Windows 7 users, sound may not be output immediately. To enable sound, follow these steps.

  • Click the Start button Control Panel Hardware and Sound.
  • Under Sound, select Manage audio devices.
  • You will see a window similar to the one below.

When the hardware and software installation and configuration is complete, you can watch streaming video on your monitor.

All you have to do is find the application on Desktop or in Program Files.

Double click or select the app, it should open.

You should see something similar to the image below.

Your TV is now on and working.