How to connect ipad to iPhone

Table of Contents

IDragon USB-OTG-flash drive (64Gb, USB2.0, Lightning): for iPhone and iPad

A small overview on the OTG drive for iPhone and iPad. This is an inexpensive and simple i-stick in a metal case with USB2.0 and honest capacity and speed.

IDragon USB OTG drive (64Gb capacity, USB2.0, Lightning) is convenient for connecting to iPhone and iPad. you can temporarily “increase” the device’s memory. movies and music are played from the flash drive, you can make a backup and transfer documents. No unnecessary troubles, especially somewhere on the run, without a computer, iCloud, and other things. Here is such an uncomplicated flash drive-dragon (iDragon) in a metal case. A distinctive feature of such flash drives is the presence of a Lightning connector for connecting directly to the device. Compatibility with the following models is declared: iPhone 6s / 6s Plus / 6 Plus / 5 / 5s / 5c / iPod4 / iPad4 / iPad mini / iPad Air / iPad pro / Mac Appearance of the iDragon flash drive. Pay attention to the small protrusion around the connector. you can use the USB flash drive without removing the case from the smartphone. In the position with the Lightning connector In the position with the USB connector. Only USB2.0 is provided The size of the flash drive is small, about 55 mm in the position with USB, in the position with Lightning 50 mm The U-shaped metal case protects only one of the connectors. Can be locked in the middle position. The flash drive is small, convenient, there is an eyelet for the key ring ring. The model and capacity are marked with a laser. Weight is only 15 g. There were instruction files on the flash drive. Example from the instructions for use. There are quite detailed settings in the menu. For correct operation, you must allow the application to access the file system. The application supports encryption, backup, etc. By use. the memory is divided (external, internal, there is a separate camera application icon). Just go to your photos, select (change. select), copy (bottom right. copy).

We connect to the computer (in the system it is displayed as iUSB) Disk properties

File Explorer Copy (speeds from 27 MB / s to 29 MB / s).

ChipGenius_v4 gives the following information: USB Device ID: VID = 2BA3 PID = 1220 Serial Number: 500000000000393B Device Name: iUSB Device Revision: 0100

Atto benchmark CrystalDiskMark benchmarks show a maximum speed of 41MB / s h2testw benchmark shows full capacity

In general, everything, the flash drive turned out to be honest, moderately convenient. The metal swivel case has a fixation of positions and an eyelet attachment allows you to carry it with you without fear of damage or loss. Access speeds are not very high (

40MB / s), but these are honest USB2.0, which allows you to comfortably work with data both on a flash drive and on a device. I would even highlight this as a plus for the drive.

Surprisingly, the application turned out to be easy to use. Basic operations. transferring photo and video from a smartphone to a drive is simple and done in 2-3 clicks (go to the folder. select. copy).

Until June 20, 2018, a coupon is valid for the iDragon (64 GB) AMC45 drive, the price of which becomes 29.99.

Airpods: what is it?

The convenience of Airpods isn’t just about cordlessness and ease of use. The new headphones are a different format for interacting with Apple gadgets. So in order to stop playback, you just need to pull one earpiece out of your ear. To resume, insert it back. Double-tapping the earphone calls up the Siri voice assistant. With the help of Airpods, Siri will dial the necessary contact, get directions, turn on “that very song”, and answer a bunch of questions.

A protective charging case with a built-in battery is provided for storing the device. One charge is enough to recharge the earbuds for 24 hours. The headphones themselves hold up to 5 hours of listening to music and up to 3 hours of talk time.

In order to receive an incoming call, you need to double-tap the earpiece. Everything is extremely simple and intuitive. It’s even easier to figure out how to connect Airpods iPhone and iPad. By the way, with some restrictions, even the second generation Airpods work with iPhone 5s and iPad mini 2. “Audio Sharing” will not be available in these models.

How to connect Airpods to iPhone and iPad

Apple makes things really simple for life. See how easy it is to connect headphones to your iPhone.

  • On iPhone, go to the Home screen.
  • We bring the open case with the headphones to the iPhone.
  • An animation with a smartphone image and a “Connect” button will appear on the smartphone screen.
  • Click “Connect”, if you have Airpods Pro, read the instructions on the screen and click “Finish”.
  • The headphones can then be used with the iPhone.
  • For iPad, the procedure is the same:
  • Go to the Home screen.
  • Bring the open case with the headphones to the iPad.
  • Then follow the instructions on the screen and click “Finish”.

After that, in order to start listening to music on headphones, just insert them into your ears and start playback.

How to connect two pairs of Airpods to iPhone and iPad

If you want to listen to music or watch a movie on iPhone iPad together, then it is most convenient to connect two headsets, and this is also simple.

  • To connect a second pair of headphones to iPhone and iPad, go to “Settings”, “Bluetooth”.
  • Open the second case with headphones, without removing them, hold the setting button on the back of the case until a blinking white indicator.
  • After that, the second Airpods will appear in the list of available Bluetooth devices in the iPhone or iPad.
  • Select them and the sound from the device is transmitted to both pairs of headphones.

For all Airpods 2 and Airpods Pro models, the setup instructions are the same.

How to connect a DualShock 4 to your iPhone or iPad

This fall, iPhones, iPads, and Apple TVs finally get support for Playstation 4 DualShock 4 controllers and select models of Xbox One controllers. Let’s see how it works. In this post, we’ll take a look at how to hook up a Sony DualShock 4 controller to your iPhone or iPad. All you need is an iPhone or iPad running iOS 13 or iPadOS 13 (currently in beta) and any DualShock 4 wireless controller for Playstation 4.

How to connect DualShock 4 to your iPhone or iPad:

  • Open “Settings” and turn on Bluetooth.
  • Make sure the DualShock 4 is charged. Without closing the settings menu, grab a gamepad.
  • Press the Playstation button and the Share button at the same time. Hold them for a few seconds. The LED on the back of the DualShock 4 will flash intermittently.
  • On your iPhone or iPad, under Other Devices. Bluetooth, you will see the DUALSHOCK 4 Wireless Controller pop-up. Click and the indicator on the back of the DualShock 4 will turn reddish-pink.

Your DualShock 4 is connected.

How to disconnect a DualShock 4 from your iPhone or iPad:

  • To disconnect with a controller, hold the Playstation button for 10 seconds. The most convenient way to disconnect using iPhone. use the Control Center.
  • Open Control Center by swiping diagonally from the upper right edge of the screen to the lower left corner if you have Face ID. If you have Touch ID, swipe up from the bottom of the display.
  • Press and hold the Bluetooth icon.
  • On the pop-up menu, press and hold the Bluetooth: On icon.
  • You should see the message “DUALSHOCK 4 Wireless Controller”. Click on it and your controller will shut down.

Another way to disable it:

  • Open “Settings” and turn on Bluetooth.
  • In the “My Devices” section, you will see “DUALSHOCK 4 Wireless Controller”. Tap on the “i” icon on the right.
  • In the menu that appears, click Disable. The controller will stop working.

If you want to use your controller again, simply press the Playstation button on the DualShock 4 and you’re ready to play again. To avoid accidentally turning it on, it’s wise to simply unplug the device and reconnect it whenever you want to play. It does not take much time. As you can see, nothing complicated. To disconnect your DualShock 4, simply repeat the steps above and click Forget Device instead of Disconnect. Have a good game!

Don’t forget to subscribe to our channel and like it! We are on Yandex Zen Our channel in Telegram

How to set up a Magic Mouse?

To set up your Magic Mouse 2, Magic Keyboard, Magic Keyboard with Numeric Keypad, or Magic Trackpad 2, follow these steps. Connect one end of the Lightning to USB cable or USB-C to Lightning cable to the Lightning port on your device and the other to your Mac.

How to connect Apple Magic Mouse to iPad?

Connecting a Bluetooth mouse or trackpad to an iPad

  • Turn on the Bluetooth accessory and bring it close to iPad.
  • Make sure the accessory is in pairing or discoverable mode.
  • Open the Settings app on iPad.
  • Click Bluetooth.
  • Find the Bluetooth accessory you want in the Other Devices section and tap its name to pair with your iPad.

How to turn off CarPlay on iPhone?

Click on the car listed in CarPlay and select Forget This Car. If you’ve used CarPlay in any vehicle, you’ll see these vehicles listed here. Click on the one on which you want to disable CarPlay.

How to enable CarPlay Kia?

If your car supports wireless CarPlay, press and hold the voice command button on the steering wheel. Make sure your stereo is in wireless or bluetooth mode. Then on your iPhone, go to Settings General and CarPlay, click on available cars and then select your car.

READ  How to enable map on 11 iPhone

How to connect a wired mouse to iPad?

Connect a wired mouse, trackpad, or Bluetooth device to the Lightning or USB-C connector. Connect a pointing device

  • Go to Settings Accessibility and select Touch.
  • Select AssistiveTouch Devices, then select Bluetooth Devices.
  • Select a device from the list.

How to connect iPhone to car radio?

Connecting using a USB cable

  • Restart the device and the car’s on-board computer.
  • Unlock iPhone and open the Home screen.
  • Try connecting with a different cable or USB port, if possible.
  • Inspect the charging port for dirt or damage.
  • Update your device.

How To Setup iPad from iPhone (Easy)

How to connect iPhone and iPad?

Go to the Options menu. Click on the ‘Sync with this (iPhone or iPad) over Wi-Fi’ checkbox. Click on the Apply button and remove the device from the computer. Now that iTunes Wi-Fi is on, you can transfer files from one device to another without using a computer.

Connecting iPad / iPhone

The only thing you need to connect your iPad / iPhone to your computer is the USB cable that comes with the device, as well as a computer with Internet access. You will also need iTunes software. IPad / iPhone uses iTunes when you connect your gadget to your computer. Any modern computer has USB 2.0 or USB 3.0 ports.

Also, the computer must be running Windows 8, Windows 7, Windows Vista, or Windows XP with Service Pack 3 or later. You must also have iTunes version 9.1 or later. The first step in connecting your iPad / iPhone to your computer is to connect your iPad / iPhone to your computer’s USB port. You will need to use the USB cable that came with your device.

Connect one end of the USB cable to the bottom of your iPad / iPhone. Then plug the USB cable into any available USB port on your computer. Once your computer and iPad are connected, your computer will automatically recognize your device. Next, iTunes should open and you can start setting up and synchronizing your iPhone or iPad.

How to connect iPad / iPhone to computer

The first thought that comes to mind for many iPad or iPhone owners is how to connect an iPhone or iPad to a computer. In this tutorial, we will show you how to connect your iPad / iPhone to your computer. Of course, both the iPad and the iPhone are primarily the latest revolutionary technologies that allow users to connect to the Internet wherever they are, and perform many functions that previously could be done using laptops and desktops.

One of the key features of the iPad and iPhone is their ability to connect to your home computer and sync your data so you can work anywhere in the world, anytime. The first step in this is to sync your iPad / iPhone connection to your computer.

Anyone with a home computer or laptop with Internet access can plug in their iPads and iPhones and start syncing files. The iPad / iPhone comes with everything you need to connect and the user interface is simple enough that all users can connect within minutes. The device is essentially plug and play. This means that you just need to connect your iPhone or iPad using the cord that came in the box and you are ready to start setting up your gadget. Once connected, the device can be synchronized with the computer, and the user can easily bring their files, music, email and even calendar dates.

Synchronization setup

After you have connected your iPad / iPhone to your computer with iTunes, the program will automatically open. If iTunes does not open on its own, then you just need to launch the software yourself by finding the shortcut in the Start menu. iTunes is used with any connection and synchronization. Through iTunes, you can sync anything you want with your computer and your gadget. After setting up sync, you can simply connect your iPad / iPhone and syncing files will take a few minutes.

The types of files that can be synced between your computer and your device can be very different: music, audiobooks, photos, movies, TV shows, books, and more. You can also sync your contact details, names, phone numbers and email addresses, web bookmarks, apps, etc.

Now that you’ve connected your iPad / iPhone, it’s time to set up syncing between your device and your computer. To do this, in iTunes, select your device in the list of devices on the left. Here you will find all the tabs where you can change the settings of your iPad or iPhone. On the main tab, you can check for software updates or restore the original settings of the gadget if you have problems. To start setting up sync press Info Tab.4 to check all the things you want your iPad to sync when connected. You can tell that to sync MobileMe, contacts, calendars, accounts and others. There are also additional options. From here go to a friend’s Extras tab, such as Apps or Music, iTunes and tell them which files you would like to sync. 2 Once you’re done here you can accept the changes by clicking Apply. From here on your iPad will sync when you connect it to your computer.

How to connect iPhone to TV via USB

Talking about connecting an iPhone to a TV via USB is incorrect, since the iPhone, in principle, never had USB ports: they are replaced by the proprietary Apple Lightning connector. Accordingly, you will need a USB Plug-and-Play cable with a connector of this type, and a USB / Lightning adapter is also possible for it.

One side of the cable connects to the HDMI or USB port on the TV, and the other to the phone. This method is not as reliable as the previous one using the original Apple adapter. You can resort to it if the house already has a Plug-and-Play cable, as there is a possibility that the whole system will not work as expected, or will not work at all.

There are docking stations with Lightning on sale, through which you can also configure video output to a TV, but many of them are technically limited, for example, they only work with a resolution of no higher than 720p. And in principle, this is almost the same as Apple TV.

Who is this guide for?

Usually, people are interested in connecting a smartphone to a TV in order to watch movies and media files from the gallery on the big screen. This is what this guide focuses on. The projection of the iPhone or iPad’s home screen when the TV is used as an external monitor will not be discussed here. There are separate instructions for this, if necessary, you can find them on the Internet.

How to connect iPhone or iPad to TV?

Not sure how to connect iPhone to your TV? We will show you some simple ways.

Apple Corporation has tried its best: it is impossible to look away from the screens of the iPhone 11 Pro and Pro Max. The juicy picture completely discourages the desire to return to the computer. On such a smartphone, you want to do everything. and surf the Internet, and write notes, and watch a movie.

As for movies, even a 6-6.5-inch display will not be enough for them. What can we say about old and economy models in which the diagonal does not exceed 5 inches. But a smartphone is a smartphone because it can be used in conjunction with other smart devices. Today we will show you how to connect iPhone to Smart TV to continue watching the video on the big screen.

How to connect iPhone to TV over Wi-Fi

The simplest option, without any wires or accessories, is to use the wireless AirPlay function, provided that the TV or home theater supports it.

AirPlay streaming is present on Apple TV set-top boxes. It is also found on TVs of some other brands. Samsung, Vizio and TCL.

But if you don’t have an AirPlay-enabled TV, and you don’t intend to buy an Apple TV, you can use an external repeater. It receives the signal from the smartphone and transmits it to the TV via Wi-Fi. Its plus is that it costs several times cheaper than a set-top box from Apple.

Once you’ve set up AirPlay, the image transfer process is straightforward. Popular streaming apps have this functionality already integrated. Run the file, click the AirPlay icon on the smartphone screen. Depending on how many devices are available nearby, you may see several options where you can duplicate an image. Find a TV among them and enjoy.

This solution has only one drawback: not every iOS app includes AirPlay support. So let’s move on to fallbacks.

How to connect iPhone to TV via HDMI

  • free HDMI port on the TV;
  • HDMI cable;
  • Apple Lightning Digital AV Adapter.

The new iPad Pro models work with the Apple USB-C Multiport AV Adapter. It is not cheap, there are simpler alternatives, but there is no guarantee that they will work as expected.

All you need to do is connect the adapter to your phone, connect the HDMI cable to the adapter and the other end to your TV.

For 4K viewing, this method is not suitable, since when using it, streaming applications are limited to 1080p resolution.

It is also important to note that the transmission of the signal occurs with a small delay. This will not significantly affect the viewing of films and videos, but in games it can be critical.

Other Ways to Connect iPhone to TV

We’ve covered the basic ways to connect iPhone and iPad to your home TV. Behind the scenes, there are less common ones, such as the Chromecast streaming player and additional mobile software. Chromecast is typically used in the Android ecosystem. And as for mobile applications for transferring broadcasts over Wi-Fi from a smartphone to a TV, many of them do not work as we would like. Most often, users are disappointed when they cannot find their TV in the list of available screens. I have to study another application, and then the second and third. That is why we have limited ourselves to ways that will almost certainly lead you to success.

Which iPads support eSIM?

  • iPhone XS, XS Max, XR, 11, 11 Pro, 11 Pro Max with iOS 12.1 or later
  • Google Pixel 3, 3 XL, 3a XL, 4, 4 XL, 4a, 4a XL with Android 10 or later
  • iPad Air 3, iPad Pro 3, iPad Mini 5 with iOS 12.1 or later
  • Samsung Galaxy S20, S20, S20 Ultra;

How to connect a USB keyboard to iPad?

First, connect Lightning to the USB Camera to iPad Adapter and then just plug the wired keyboard into the adapter.

How to make calls from an iPad to a cell phone?

How to use iPhone (Cellular) on iPad

In order to call a specific number, you need to launch the FaceTime application, enter the phone number in the search field and click “Call”. To accept a call on the iPad, you just need to move the slider in the incoming call window in the traditional iPhone way.

connect, ipad, iphone

How to turn off syncing calls between Apple devices?

Go to Settings. Phone. Calls on other devices and turn off Allow calls. 2. After that, open the Apple ID. iCloud section and disable iCloud Drive.

How to sync iPhone and iPad via iCloud?

The main advantage of the method is its simplicity; you don’t even need to connect the iDevice to your computer. It is enough to go to Settings → Apple ID (your first and last name) → iCloud and specify the Apple ID account data for synchronization, after which all marked content will appear on the iOS device automatically.

READ  How to connect bluetooth to Samsung TV

How to turn off syncing between iPad and iPhone?

Remove a linked iPhone, iPad, or iPod touch

  • Click Settings [your name] and select “iTunes Store & App Store”.
  • Choose your Apple ID.
  • Click View Apple ID. You may need to sign in.
  • Scroll down to the “iTunes in the cloud” section and click “Remove this device”.

Can I connect an external hard drive to iPad?

The Lightning to USB 3 Camera Adapter can be connected to a power source via a USB power adapter. This allows you to connect USB devices that require more power to your iPad. Such devices include, for example, an external hard drive.

How to sync between iPad and iPhone?

How to connect iPad to iPhone via Bluetooth?

  • Open the application and select the required connection option (general access, multiple players and voice chat).
  • Turn on Bluetooth on both devices.
  • Select a device from the list.
  • Wait for other users to accept the invitation.

How to Connect iPhone to iTunes on Computer via USB and Wi-Fi

Hello everyone! Today I will briefly analyze the question. how to connect iPhone to iTunes. It seems that there is nothing complicated, but very often problems arise when the smartphone is not visible in the application. I analyzed all possible variants of problems in the article, if you have any additional difficulties, then write about them in the Комментарии и мнения владельцев.

USB connection

To connect iPhone to iTunes to computer you need:

  • Connect your smartphone to an available USB port of a computer or MAC using the cable that you use for charging.
  • Launch the iTunes application on PC, and at the top you need to click on the phone icon.

NOTE! If there is no such icon, then skip to the chapter on solving connection problems.

  • On the left, you can select the category of content with which you want to work, then be sure to select the “Synchronization” checkbox in the main area.

Wi-Fi connection

You can also connect your iPhone to your computer via iTunes using a wireless network. Before that, it is desirable that both devices be connected to the same Wi-Fi router.

  • We launch the program and connect the phone to the PC via USB using a cable. Don’t worry, you only need to do this once to sync.
  • Click on the icon of your device on the left, then go to “Summary” and select the checkbox for Wi-Fi synchronization.
  • After that, you can disconnect the device from the computer. If the computer and the phone are on the same WI-FI network, then the iTunes application will see your iPhone.

Troubleshoot connection problems

  • iPhone 7 and 7 Plus. hold down the sleep button and the volume down button.
  • iPhone 6s, 6 Plus or SE (without Face ID). hold down the sleep button and “Home”.
  • Similarly, you need to update iTunes itself. for this, in the top menu, select the “Help” item and then click on the “Update” or “Check for an update” item. If an update is found, then click on the desired button. After the update, it is advisable to restart the program.

If you are using a PC with a Windows operating system, then you need to go to the “Device Manager”. open the search box through the “Start” menu and enter the name of the system component.

Open the section portable or portable devices, right-click on your device and then select “Update driver”.

If this does not help, then try “Remove device”, and then click on the update button for all drivers. we find at the very top of the window.

Also go to Windows Update, check and download the latest updates for your OS.

If the manipulations did not help, and you downloaded iTunes from the official Apple website, then you can try to restart the USB driver for iPhone.

  • Disconnect your smartphone from your PC.
  • Reconnect your phone to your PC.
  • If iTunes starts automatically, close it.
  • Open Explorer or Computer and follow the path:

C: \ ProgramFiles \ Common Files \ Apple \ Mobile Device Support \ Drivers

  • Turn off the smartphone, restart the computer and try to connect again.

If none of the above helped, then try connecting to the program on another PC. if the problem persists, then most likely the connection error occurs precisely because of the iPhone itself or due to a cable malfunction.

How to connect Airpods to iPhone

Before pairing and presetting Airpods, Apple recommends updating the software on your iPhone. The 1st generation earbuds are compatible with iOS 10, 2nd generation with iOS 12.2, and Airpods Pro with 13.2. Likewise, you’ll have to take care of the iPad, iPod Touch and Nano.

Without downloading updates, the full performance of the wireless accessory is not guaranteed, but it is not excluded either.

The current versions of iOS are available in the “Settings” section, in the “General” section and in the “Software update” sub-item. How to proceed further. the step-by-step instructions will tell you:

  • Go to the Home screen on the iPhone, place the Airpods next to it and open the case with the headphones inside.
  • The iPhone screen immediately prompts you to “Connect” a new accessory. If the screensaver does not appear, then on the back cover of the case you will have to press and hold the button to activate pairing.
  • After connecting the headphones, you should look into the Bluetooth settings, and from there, go to the Airpods settings. The list of options available for change depends directly on the version of the accessory.

On the 1st generation Airpods, gesture change is provided. double-tapping on the right or left earphone will help to change the track or pause the playback. On the 2nd version, a call to the Siri voice assistant appeared. On Airpods Pro. Active noise canceling control.

Playing Music Through Airpods

Apple wireless headphones adhere to a number of concepts when playing music, audiobooks, and browsing media content. If you take the wireless headphones out of the case and insert them into your ears, the sound will automatically be transmitted to the accessory, bypassing the standard speaker. The signal is intercepted almost at lightning speed, and without additional visits to the settings, and even between different mobile equipment. Mac computers, iPads or Apple Watch.

If you take one Airpods out of your ear during playback, the current audio track or even the video will pause. If both are removed, playback will pause, but will resume if you return the accessory to your ears within 15 seconds.

For manual control of the sound source, the developers suggest using a special icon:

Can be found in the native music player on the iPhone, iPad or iPod Touch, and in third-party entertainment services such as YouTube or Twitch.

When referring to the icon, it will be possible to select a playback source. an accessory or a speaker.

How to connect Airpods wireless headphones to iPhone: setup and troubleshooting

Hello everyone. Question: how to connect Airpods to iPhone is often found on the network, but there is no clear answer. Therefore, the time has come to figure out how to pair the accessory with mobile equipment, and with setting up the controls, and with the features that appear when playing content. Also consider issues when wireless headphones won’t connect.

What to do if they don’t connect?

Alternatively, test the headphones on a different device. If the problem persists, then there is a breakdown in the “ears” themselves and they should be taken for repair.

How to Use a DualSense Gamepad on an iPhone | iPad?

Once you’ve paired your Playstation 5 controller, you can use it like any other MFi-certified gamepad in a variety of games. All Apple Arcade games and other well-known mobile games support joysticks such as Call of Duty Mobile, PUBG or Madden NFL 21, which are easier to play thanks to the controller.

Each game displays the buttons differently. The developers are deciding how to map the controls of the game itself to the buttons of the physical gamepad. However, the Share button works everywhere.

  • Hold Share for a second to take a screenshot.
  • Double-clicking the Share button starts screen recording.

By the way, the DualSense gamepad now works with Apple TV running the new tvOS 14.5 operating system. It connects to the set-top box in the same way: we enter the joystick into pairing mode, and on the Apple TV itself, in the Bluetooth settings, select our gamepad and pair.

How to Connect a PS5 Gamepad to an iPhone | iPad on iOS 14.5

In today’s step-by-step guide, we’ll show you how to connect a Playstation 5 DualSense controller to an iPhone or iPad running iOS 14.5. Go!

recently, the first beta version of the new operating system iOS 14.5 has been released. We have already written about the changes and innovations of the OS, and one of those was the support for DualSense gamepads for PS5. That is, Apple made it possible to play games on an iPhone or iPad using a joystick from a console, and it’s cool that Cupertino also cares about mobile gaming.

But let’s figure out how to connect and use the Playstation 5 DualSense gamepad on an iPhone or iPad running iOS 14.5 or iPadOS 14.5. By the way, the controller for Xbox Series X can now also be connected to mobile devices thanks to a new update. I want to note that it will go with the first beta version of iOS 14.5 and to install it you need to be a developer or participate in the beta testing program. We do not recommend installing an update yet. all actions are at your own peril and risk.

How to Connect a DualSense Gamepad to Your iPhone | iPad?

This is done very simply, literally in a few clicks.

  • Open Settings.
  • Click Bluetooth.
  • On a DualSense controller, hold down the center PS button and the upper left share button until the controller blinks.
  • Listed Bluetooth Devices on Your iPhone | iPad at the very end a gamepad will appear. tap it, and then pairing will take place.

As you can see, Apple implemented this without any difficulties and connecting a DualSense gamepad for PS5 to an iPhone on iOS 14.5 does not differ from pairing regular wireless headphones.

How to Customize Gamepad Buttons on iPhone | iPad?

You can customize the PS5 controller buttons for different functions and games. This requires:

  • Open Settings.
  • Select Basic.
  • Click on Game Controller.
  • Select an application to make changes.
  • Customize each button to perform specific functions in the game.

As you can see, you can reassign the function for any button. This is very convenient, because everyone plays with their own individual control settings. This option works not only with DualSense, but with DualShock 4 and Xbox controllers.

Thus, you can connect the DualSense gamepad for the new Sony Playstation 5 game console to an iPhone or iPad running the first beta version of iOS 14.5 and iPadOS 14.5. Have you already upgraded to the new OS version? Write about it in the Комментарии и мнения владельцев here and in our Telegram channel. All the best!

How to connect an SD or microSD card to iPhone and iPad

Many iPhone and iPad users have dreamed of being able to connect memory cards to their devices since the release of the iPhone 3G. A little later, such a solution appeared, but required the installation of a jailbreak, and then the “native” adapter still waited for Apple. Nevertheless, the world’s first Lightning card reader with the ability to read and write was not developed at all in Cupertino, but in a small company, Adata.

Last fall, the latter introduced the Lightning Card Reader. a special adapter for iPhone and iPad with SD and microSD cards. We have waited for our copy and are ready to tell about our impressions, and most importantly. to answer the question: is such a card reader needed at all??

READ  How to Connect Locked iPhone to iTunes

At the top of the card reader is a slot for microSD cards, and at the bottom for SD cards, drives up to 256 GB are supported. It is curious that microSDs are inserted correctly, but ordinary SDs have to first be turned upside down. Either the design idea is this, or the connectors are confused. The solution is strange anyway.

The only thing that Lightning Card Reader lacks, according to our observations, is speed. Ripping videos takes longer than you’d like, and if you’re dumping 4K footage with a GoPro, you might still have time to dine. Otherwise, this is one of the best (and almost the only) solutions that can be found. The accessory is certified under the MFi program, which cannot be said about cheap Chinese fakes.

In general, see for yourself whether you need such an accessory for your daily needs. You can learn more about Lightning Card Reader on the manufacturer’s website, and purchase it online (for example, on eBay).

Longreads for you

An iPhone without connectors might be cool, but have you thought about how to restore such a phone? And roll back the iOS version on it? Apple, it turns out, has already thought, and it has a solution to all problems. Getting ready, it looks like!

One or more of the pins on the Lightning cable are suddenly blackened? Do not rush to sound the alarm maybe that’s okay. And it will not affect the work of the wire in any way. But why is this happening? It’s not about corrosion at all.

Would you like an iPhone without ports at all? Looks like Apple is developing something similar. But MagSafe still has many drawbacks that need to be fixed. We tell you which ones.

This is actually a very useful thing. At least for me, I sometimes shoot a lot of videos and with all this, I always bought 16GB devices, used cloud services (not always convenient) And now imagine: you are on vacation, for example at the sea. And you wanted to shoot vidos as a keepsake (Aymuvi is an irreplaceable thing), then mount the whole thing and show your friends and family how wonderful you spent your vacation. New devices in 4K shoot and naturally there will be a desire to shoot exactly high quality, lying on the shore sipping cold beer, you will be tormented by the trouble of how to merge a quick video without wifi (there are a lot of people in resorts and it’s not a fact that 3G will work well, not to mention LTE) then you remember the flash drive)

Well, something like this. This is all in the situation with me, let me remind you: 16 GB. And I ran into this situation There is utility in this thing And at the expense of the price, that Apple products are cheap?) Films and Chinese one-day charges?

How to connect to SMB server (network folder) from iPhone and iPad

Ever wanted to connect an SMB shared server or network folder to your iPhone or iPad? If you work with servers, you can make your life easier, because now you can connect them directly to the Files app on iPhone and iPad.

This is one of the new features of iOS 13 and PadOS 13. It will definitely be appreciated by those who work with servers from Mac, PC with Windows or Linux. When you connect the server, you can open its files and save them.

connect, ipad, iphone

If you have not yet set up file and folder sharing on Windows or Mac, you can find out how to do it in our article. How to share files between PC with Windows 7/8/10 and Mac OS X.

How to connect an SMB server to an iPhone or iPad

This feature requires iOS 13 or iPadOS 13.1 or newer.

  • Open the standard Files app on your iPhone or iPad.
  • Select the Overview tab at the bottom of the iPhone screen or in the iPad sidebar.
  • Click the three-dot icon in the upper right corner of the screen.
  • Select “Connect to Server”.
  • Now you need to enter the address of your computer or shared server. If you do this in the workplace, the IT department can help you find the address. When you’re ready, click “Connect”.
  • Enter the server username and password, or if it is not a server but a shared computer, enter the authorized user information. Or select “As Guest” if the Guest user is activated on your computer.
  • The server appears in the list on the Browse tab. Select it to view its files.

That’s all. Once you configure the server once, you can view it whenever you want. You can even open files from the server through other applications.

You can connect any shared servers, whether they are from a Mac or a Windows PC. The new feature is very useful and convenient. over, it helps to save storage space on iPhone and iPad. Now even large files will always be accessible from a small smartphone.

How to quickly and efficiently connect iPhone to iPad

Step 1. Install the best iPhone to iPad connector on your computer

Download and install iPhone Transfer on your computer. There is one version for Windows and Mac respectively. Connect iPhone and iPad to Computer with Lightning Cables.

Step 2. Preview iPhone data before transfer

Start iOS Transfer, select the original iPhone name on the left side, and then click the data types you want to transfer, such as Music, Photos, iBooks and more. You can now view all data and files in the right detail panel. Check the box in front of each file to transfer.

Step 3. Transfer Files from iPhone to iPad

When you’re ready, expand the Export To menu in the top ribbon and select Export to [target device name] to start transferring the selected files from iPhone to iPad. IOS transfer software can save files to corresponding apps on iPad. When done, remove both devices from your computer and you can view iPhone data on iPad.

How to connect iPhone to iPad via Bluetooth

To connect iPhone to iPad using Bluetooth, you must place the two devices as close as possible.

Unlock your iPhone and open the Settings app from the home screen. Go to “Personal Hotspot” and set the “Personal Hotspot” switch to the “ON” position. Be sure to turn on Wi-Fi in the settings. And click bluetooth and toggle the slider.

Turn on iPad, go to Settings, Bluetooth, and flip the switch to ON. Now you can see your iPhone name is displayed under Device. Click it in the list to establish a connection.

When you see “Connected” next to your iPhone’s name, it means the connection is successful; otherwise, you can try several times. If prompted for a PIN, enter it on both iPad and iPhone and tap Pair to establish a connection.

Bluetooth is based on geographic location, so you must keep both devices close to each other while transferring files. Also, this method only allows limited data types and small file to be transferred between iPhone and iPad.

How to connect iPhone to iPad via Airdrop

landing is another way to connect iPhone to iPad; The advantage is that this feature does not limit the file size.

Open your iPhone and go to Control Center, turn on Wi-Fi and Bluetooth. Click the AirDrop icon and select Contacts Only or Everyone to turn it on. If you select Contacts Only, you need to sign in to your iCloud account.

In iOS 11, the AirDrop feature is located in the wireless control unit of the Control Center.

Step 2. Repeat step 1 on iPad to enable AirDrop function.

Step 3. Now you can transfer files from iPhone to iPad via AirDrop. Let’s take a photo as an example. Go to the Photos app on iPhone, open the All Photos album, click Select in the upper right corner, click the photos you want to transfer, click the Share icon in the upper left corner, click AirDrop and select the target iPad

Turn on the recipient’s iPad and click “Accept” on the pop-up dialog to start the transfer.

Although AirDrop has no file size limit, it can take a while to transfer HD photos and videos between iPhone and iPad.

How to connect iPhone to iPad via cord

Compared to wireless, a physical connection provides faster and more stable data transmission. You can physically connect your iPhone to iPad using a special cable.

Step 2. Insert one end of the cord into your iPhone and the other end. into your iPad. Make sure the link to the photo is the same.

When the two devices find each other, a warning message will appear on your iPhone asking whether to allow this device to access your phone. Click “Allow” to allow the connection.

Turn on iPad, an Import button will appear and content that can be transferred to iPhone. Select photos, videos and other content and click “Import All” to save data from iPhone to iPad.

Best Way to Connect iPhone to iPad

To be honest, there are many downsides to connecting iPhone to iPad without a computer. Bluetooth, for example, is not reliable and cannot transfer large files. Why not use your computer as a storage medium to transfer files from iPhone to iPad? From now on, we recommend iPhone Transfer.Its main functions are:

  • Connect iPhone to iPad, Mac and Windows PC.
  • Support for a wider range of date types such as contacts, messages, photos, call history, PDF, music and more.
  • Use a physical connection to quickly transfer data from iPhone to iPad.
  • Keep original quality and format when saving files between iPhone and iPad.
  • Compatible with iPhone X / 8/7/6 / 6S / SE / 5 / 5s / 4, iPad Pro / Air / Mini and earlier and iPod Touch.
  • Available for Windows 10/8 / 8.1 / 7 / XP and Mac OS.

Download for WinDownload for Mac

In short, this is the easiest way to connect iPhone to iPad.

Tutorial to Connect iPhone to iPad with Bluetooth, AirDrop and Cord

iPhone. one of the most ubiquitous smartphones on the market and Apple has developed a distinct business model. According to the study, Apple customers are more loyal and usually have multiple Apple products such as iPad and MacBook. As you know, iOS. it is a special mobile operating system that does not allow access to system folders. This makes it difficult to connect iPhone to iPad.

To help users share or transfer files between iPhone and iPad, Apple has introduced several features for iOS devices, such as Bluetooth and AirDrop. In this tutorial, we are going to show you how to connect iPhone to iPad using these features.

Many people today are multi-device users who have more than one digital device. And iPhone users are more likely to have an iPad as their second screen. This makes connecting iPhone to iPad a necessary skill. On the other hand, you may need to share photos from your iPhone to a friend’s iPad. Anyway, we’ve shared several ways to help you connect iPhone to iPad and transfer files. If you are demanding on speed and security, you better try iPhone Transfer, one of the best programs for connecting iPhone to iPad.

How to Connect iPhone to iPad


BICBON.COM 2021