How to Connect Locked iPhone to iTunes
iPhone Disconnected Connect to iTunes: How to Unlock
The volume of personal data on mobile devices is constantly growing. Previously, there was nothing interesting in the phone besides the address book, SMS and photos. Now it stores social media profiles, bank cards, emails and much more that I would like to protect from prying eyes.
Setting a password is the simplest, but at the same time, a rather problematic method of protection. Ten incorrect input attempts will result in a complete blocking of the device, and a notification will appear on the screen: “iPhone is disconnected, connect to iTunes.” How to unlock a smartphone after its appearance, we understand this material.
Despite the “formidable” appearance of the notification that appeared, nothing terrible actually happened. All you need is a computer with iTunes installed and a little luck. Older versions of iOS allowed resetting the retry counter. Thus, by connecting an iPhone 4S or 5S to a PC, it was possible to ultimately unlock the device by consistently selecting combinations. In modern firmware, this “loophole” has been eliminated for security reasons. There is only the possibility of restoring from a backup copy.
Not everyone creates local copies, many successfully use automatic data synchronization through the iCloud “cloud”. However, when iPhone locks due to incorrect password, you still have to resort to iTunes.
- We connect the device to the PC and use the forced recovery mode provided in case of serious firmware failures. For iPhone X and Series 8, the transition to it is as follows. On the left side, briefly press the volume up and then volume down buttons. After that, on the right side, hold down and hold the power button until the picture shown in the screenshot appears, displaying the iTunes logo and the Lightning cable connector.
- IPhone 7 owners need to briefly press the volume down button and then hold down the power key.
- 6S and earlier users need to press the Home and Power Off keys at the same time.
- After successfully transferring the smartphone to DFU mode, in the iTunes window, press the button indicated in the screenshot.
- A pop-up window will appear with information about the consequences of the performed actions and controls. Press the middle button in it.
As a result of the actions performed, the program will automatically update the connected device to the latest version of the OS, simultaneously erasing all data from it and resetting the access password. After that, the smartphone can be restored from a cloud copy or set up as new.
As you can see, it is quite easy to remove the security lock, while the presence of a local backup is not always a prerequisite. To be guaranteed to save your data, be sure to back up to the “cloud”. In this case, even a complete reset of the device will not lead to their loss.
Fix “iPhone is Disabled Connect to iTunes” | Easy Fix
The unlocking operation does not always go as smoothly as described above. In some cases, errors may appear. Let’s consider a few of the most common.
Brute force protection
In case of loss or theft, Apple has provided protection in its devices that does not allow you to bypass the password lock using the so-called brute force. The “brute force” method consists in gaining access by selecting a combination. For example, for a standard four-digit code, their number is 10,000, and for an enhanced six-digit code, it is one million. Let’s see how it works.
- The first time the smartphone is locked for one minute after the password is typed incorrectly six times in a row.
- The next attempts can be made at intervals of 5 and 15 minutes. After the ninth time, the iPhone is locked for one hour. During this time, you can try to write to relatives who may know the password or remember it on their own.
- If the last attempt fails, the smartphone is blocked completely. It is useless to write to Apple technical support and ask to return access to the device. The company does not store information about passwords and, accordingly, cannot help in this situation.
As you can see, accidentally locking your phone is not easy. In total, this will require at least an hour and a half of active action.
How to turn on iPhone 6
The Iphone 6 has the power button on the right side, and not on the top like in the 5th model. All subsequent iPhones also have a button on the right.
This method is suitable for all models, it is considered the most correct. To turn on the iPhone 5, you need to hold down the “Power” button for 3-4 seconds (it is located on the top end). As soon as the Apple logo is displayed on the screen, you can release it.
How to turn on a locked iPhone
In the settings of any iPhone, you can turn on password, fingerprint or Face ID protection. If you enter the password incorrectly several times, iPhone will be locked. The blocking time depends on the number of attempts, the more there are, the longer it is in the blocked state. On reboot, the user receives an inoperative “brick”.
This situation does not always mean that the phone was stolen. Perhaps the password has been forgotten or children have played with it.
It is not a problem to turn on a locked iPhone, it can be done in 3 ways:
- by the standard method via the power button;
- in an emergency way through the volume keys and power hold;
- by connecting a discharged smartphone to the network.
But how do you turn on a locked phone so that you can access it? Consider below.
- Go to the iCloud website.
- Click “Find iPhone”, select the desired device.
- Find the “Erase iPhone” button (there must be a backup). The phone will start to recover.
- After installing the backup, the operating system will ask for a new password.
The main power button is still in place. You can turn on the iPhone 10 simply by holding it for 3-4 seconds. Once the logo appears, you can release it. If an image of a discharged battery appears, the device is charged.
To turn on iPhone 8, you need to press and release “”, press and release “-“. Hold down the power key on the side end for 10-15 seconds. After the logo appears on the display, you can release the button.
Such loading cannot be used often, since it resets the operating system settings.
How to turn on iPhone
Iphone is becoming more and more popular with buyers. 13% of the market in our country are Apple users. However, after purchasing or discharging the device, some do not know how to properly turn on the iPhone. Let’s consider all the methods in more detail.
To connect iPhone to iTunes to computer you need:
- Connect your smartphone to an available USB port of a computer or MAC using the cable that you use for charging.
- Launch the iTunes application on PC, and at the top you need to click on the phone icon.
NOTE! If there is no such icon, then skip to the chapter on solving connection problems.
- On the left, you can select the category of content with which you want to work, then be sure to select the “Synchronization” checkbox in the main area.
You can also connect your iPhone to your computer via iTunes using a wireless network. Before that, it is desirable that both devices be connected to the same Wi-Fi router.
- We launch the program and connect the phone to the PC via USB using a cable. Don’t worry, you only need to do this once to sync.
- Click on the icon of your device on the left, then go to the “Summary” and select the checkbox for Wi-Fi synchronization.
- After that, you can disconnect the device from the computer. If the computer and the phone are on the same WI-FI network, then the iTunes application will see your iPhone.
How to Connect iPhone to iTunes on Computer via USB and Wi-Fi
Hello everyone! Today I will briefly analyze the question. how to connect iPhone to iTunes. It seems that there is nothing complicated, but very often problems arise when the smartphone is not visible in the application. I analyzed all possible variants of problems in the article, if you have any additional difficulties, then write about them in the comments.
Troubleshoot connection problems
- iPhone 7 and 7 Plus. hold down the sleep button and the volume down button.
- iPhone 6s, 6 Plus or SE (without Face ID). hold down the sleep button and “Home”.
- Similarly, you need to update iTunes itself. for this, in the top menu, select the “Help” item and then click on the “Update” or “Check for an update” item. If an update is found, then click on the desired button. After the update, it is advisable to restart the program.
If you are using a PC with a Windows operating system, then you need to go to the “Device Manager”. open the search box through the “Start” menu and enter the name of the system component.
Open the section portable or portable devices, right-click on your device and then select “Update driver”.
If this does not help, then try “Remove device”, and then click on the update button for all drivers. we find at the very top of the window.
Also go to Windows Update, check and download the latest updates for your OS.
If the manipulations did not help, and you downloaded iTunes from the official Apple website, then you can try to restart the USB driver for iPhone.
- Disconnect your smartphone from your PC.
- Reconnect your phone to your PC.
- If iTunes starts automatically, close it.
- Open Explorer or Computer and follow the path:
C: \ ProgramFiles \ Common Files \ Apple \ Mobile Device Support \ Drivers
- Disconnect the smartphone, restart the PC and try to connect again.
If none of the above helped, then try to connect to the program on another PC. if the problem persists, then most likely the connection error occurs precisely because of the iPhone itself or due to a cable malfunction.
How to Connect iPhone to iTunes on Computer
iTunes is a must-have for all Apple device users. With it, you can download videos, music, photos, books, and other files to your device. ITunes is also used to sync, backup and restore Apple mobile devices.
In general, iTunes is needed in a variety of situations, so it is very important to be able to use it. In this article, we will show you how to connect iPhone to iTunes on Windows computer.
In order to connect your iPhone to iTunes on your computer, you need a cable. If you have an iPhone 5 or newer iPhone, you need a Lightning cable. This cable is shown in the picture below.
If you have an older model (for example, iPhone 4s or older), then you need a cable with a wide 30-pin connector.
Either way, you must have the correct cable, since you are using it to charge your iPhone. Just unplug it from the charger and you can use it to connect your iPhone to iTunes.
Connect iPhone to Computer.
Once you’ve found the right cable, use it to connect your iPhone to your computer. To do this, you just need to plug one end of the cable into the iPhone, and the other into the computer.
Once connected, you should hear a beep indicating that the computer has detected a new device. Also, when you first connect to a computer, a message should appear on the iPhone screen asking you to confirm the reliability of this computer.
If such a message appears, then click on the “Trust” button.
Once your iPhone is connected to your computer, you can launch iTunes. To do this, use the shortcut on your desktop or in the Start menu. If you can not find the shortcut, then just open the “Start” menu, search for “iTunes” and the computer itself will offer you the desired application. If the search doesn’t find anything, then iTunes may not have been installed yet. In this case, go to the Apple website, download iTunes there and install it on your computer. You can read more about installing iTunes on your computer in this article.
After launching iTunes, you’re done. You have connected iPhone to iTunes on your computer and now you can control your iPhone using this program.
Additionally. Set up a Wi-Fi connection to iTunes.
Later, you can connect iPhone to iTunes via Wi-Fi. In order to get this opportunity, you need to connect the iPhone via cable, start iTunes and click on the device button, which is located in the upper left corner of the window.
After that, you need to enable the “Sync this iPad over Wi-Fi” function and apply the settings.
After that, your iPhone will connect to iTunes over Wi-Fi. It should be noted that this function works only when the iPhone is charging and connected to the same Wi-Fi network as the computer.
How to connect iPhone to iTunes: sync with computer throw off reset upload upload does not see error blocked
Have you just purchased an iPhone, iPad, iPod and are ready to watch videos on it, listen to music and share freshly taken photos? Then it’s time to set up the synchronization of the device with a personal computer in order to quickly upload upload upload throw your content in two directions. We will also talk about backups and errors what to do if writes does not see disabled iPhone locked in iTunes.
Next, download the iTunes program from the official website to your computer, install it, launch and connect all of the above devices.
In iTunes, in the upper left side of the program, click the iPhone icon, after which a list of folders for synchronization will open in front of us on the left side.
It should be remembered that such data as e-mail, your profiles, notes, bookmarks, you will not be able to synchronize to work with them there is a special service from Apple (Apple) it is called iCloud (Icloud).
Turn on the phone and connect to the computer with the cord. Open iTunes, sign in to your account. There will be a phone icon at the top left, click on it. You will be shown the phone menu, as well as the “Synchronize” button. By clicking on the button, you start the synchronization process.
First of all, you will need to launch iTunes and then connect your iPhone to iTunes on your computer using a USB cable. If you are connecting to a computer for the first time, the message “Do you want to allow this computer to access [device_name] information” appears on the computer screen, where you will need to click the “Continue” button.
The program will wait for a response from your device. In this case, in order to allow the computer access to information, you will definitely need to unlock the device (iPhone, iPad or iPod) and to the question “Trust this computer?” click on the “Trust” button.
Next, you need to authorize the computer in order to establish full trust between devices to work with your personal information. To do this, in the upper area of the program window, click on the “Account” tab, and then go to “Authorization”. “Authorize this computer”.
A window will appear on the screen in which you will need to enter your Apple ID credentials. login and password.
The system will notify you about the number of authorized computers for your device.
A miniature icon with a picture of your device will appear at the top of the iTunes window. Click on it.
The screen will display the menu for controlling your device. The main control sections are located in the left pane of the window, and the contents of the selected section are displayed in the right pane.
For example, by going to the “Programs” tab, you have the opportunity to work with applications: customize screens, remove unnecessary applications and add new ones.
If you go to the Music tab, you can transfer your entire iTunes music collection to your device, or transfer individual playlists.
In the “Overview” tab, in the “Backups” block, by checking the box next to the “This computer” item, a backup copy of the device will be created on the computer, which can later be used both to fix problems with the device and to comfortably move to a new gadget Apple with all information saved.
And finally, in order for all the changes you made to take effect, you just need to start the synchronization. To do this, in the lower area of the window, click on the “Synchronize” button.
The synchronization procedure will begin, the duration of which will depend on the amount of information being processed. It is strongly recommended not to disconnect your Apple device from your computer during the synchronization process.
The end of synchronization will be indicated by the absence of any work status in the upper area of the window. Instead, you will see an image of an apple.
From this point on, the device can be disconnected from the computer. To do this safely, you need to first click on the icon shown in the screenshot below, after which the device can be safely disconnected.
The process of controlling an Apple device from a computer is somewhat different from, for example, working with Andoid gadgets. However, after spending a little time exploring the capabilities of iTunes, the synchronization between your computer and iPhone will proceed almost instantly.
Before using iTunes to sync content to your iOS device, it is recommended that you use iCloud, Apple Music, or a similar service to save your Mac or Windows PC content to the cloud. This way you can access your music, photos and other files from your iOS device when your computer is not around.
What can be synced using iTunes
Albums, songs, playlists, movies, TV shows, podcasts, books and audiobooks.
Photos and videos.
Contacts and calendars.
Device backups created with iTunes.
ITunes features may vary by country or region. Synchronizing or Deleting Content Using iTunes
Open iTunes and connect your device to your computer with a USB cable.
Click the device icon in the upper left corner of the iTunes window. Find out what to do if the icon doesn’t appear.
From the list below the Preferences section on the left side of the iTunes window, select the type of content you want to sync or delete.1 To enable sync for a content type, select the Sync checkbox.
Check the box next to each item you want to sync.
Click the Apply button in the lower right corner of the screen. If syncing doesn’t start automatically, click the Sync button.
An iOS device can only sync with one iTunes library at a time. If you see a message that your iOS device is synced with a different iTunes library, then it was previously connected to a different computer. If you click “Erase and sync.” in this post, all content of the selected type on the iOS device will be erased and replaced with content from the computer.
After you set up sync with iTunes over USB, you can set up iTunes to sync your device using Wi-Fi instead of USB. Below is the procedure.
Connect your iOS device to your computer with a USB cable, then open iTunes and select your device.
Click Browse on the left side of the iTunes window.
Select “Sync with this [device] over Wi-Fi”.
Click the Apply button.
If your computer and iOS device are connected to the same Wi-Fi network, the iOS device appears in iTunes. Your iOS device syncs automatically when it’s connected to a power source and iTunes is open on your computer.
In order to sync iPhone with iTunes, you need to prepare a smartphone and a USB cable. We launch iTunes, connect the cable to the computer and smartphone, and wait for the connection to be established. As soon as the device is detected, the information about the connected device will appear on the “Overview” tab. Now we can start setting up the program and work with content or firmware. How to sync iPhone with iTunes via Wi-Fi?
To do this, follow these steps:
Connect the iPhone to the computer with a cable and wait for the connection to be established;
Go to the “Overview” tab and check the “Synchronize with this iPhone via Wi-Fi network” box;
Disconnect from PC, go to iPhone in “Settings. General. Synchronization with iTunes via Wi-Fi”;
Make sure that the computer and smartphone are connected to the same Wi-Fi network, click on the “Synchronize” button.
Now you can transfer data without a cable, using a wireless connection.
Using a wireless connection over Wi-Fi, you will not be able to perform a firmware restore. You also need to know that the data transfer rate over Wi-Fi is slightly lower than over cable.
Synchronization to create backups
How to sync iPhone with iTunes to create backups? This procedure is quite simple and does not cause any difficulties even for untrained users. We launch iTunes, connect the iPhone and wait for the connection to be established. Next, go to the “Overview” tab and find the “Backups” subsection there.
We set the checkbox “This computer”. thereby we indicate the storage location of the backup;
Click on the “Create a copy now” button. an immediate copy will be created;
We are waiting for the completion of the procedure. it may take 10-15 minutes.
After that, you can disconnect the cable or start performing other operations.
Be sure to specify the path “This Computer” to create a full backup. If you select “iCloud”, the program will save only the most important data, and not on a computer, but in the iCloud cloud service.
Something went wrong and you need to restore data from some kind of backup? To do this, you need to launch iTunes, connect your iPhone to your computer, go to the “Overview” tab and find the “Backups” subsection. Here we click on the “Restore from a copy” button, select the required copy and start the restore. after a while, the contents of your iPhone will look the same as it was at the time of the backup.
Unfortunately, we cannot just take and transfer music from computer to iPhone without using iTunes. The point is that smartphones from Apple are not recognized by computers as removable storage devices. Therefore, syncing via iTunes is one of the few tools for quickly copying music tracks to iPhone memory.
How do I sync music? First, we need to set up iTunes. select the “Overview” tab and set the checkboxes “Synchronize only checked songs and videos” and “Process music and videos manually.” To save space in the internal storage of the iPhone, we can check the box “Reduce the bitrate for high quality songs to kbps AAC”. in place of the points there is a drop-down list where the appropriate bitrate value is selected (you can leave the standard 128 kbps).
Now everything is ready to download music tracks. To do this, you need to add them to the library by direct copying with the mouse or through the “File” menu. Next, put a tick “Synchronize music”, mark the tracks necessary for downloading, click on the “Apply” button. data synchronization will start, which will make the contents of the smartphone identical to the contents of the library. If necessary, you can upload music of certain genres or certain artists.
If necessary, you can edit additional data present in music tracks. these are ID3 tags, album art and much more.
To sync your videos using iTunes, you need to add them to the list on the Browse tab. They can be viewed here if the system has a Quick Time player installed. After that, we proceed to synchronization. check the “Synchronize movies” box, mark the downloaded files, click on the “Apply” button and wait for the synchronization to complete. Considering the large amount of transmitted data, the procedure may take 10-15 minutes.
In a similar way, we can upload other content to the iPhone. these are movies, clips, e-books, podcasts and much more. With practice, you will be doing content adding operations with your eyes closed. If you want to speed up and simplify adding content, use alternatives to iTunes. a typical example is iTools, which resembles the most common file manager.
The iTunes multimedia processor is often criticized for its complexity. For beginners, he seems unusual and incredibly sophisticated. It should be noted that the latest versions of iTunes have a more understandable and pleasant interface, and all the functionality is divided into thematic tabs to make it clearer where to look for certain functions. Once you have read the content synchronization issues once, you will transfer data without hesitation.
All operations in iTunes are performed in approximately the same way, so difficulties are possible only at the initial stage. In the future, you will be able to automatically sync iPhone with iTunes without fear of losing important data. for this you need to uncheck the manual content processing checkboxes on the “Overview” tab. After that, the synchronization will start on its own, immediately after connecting the iPhone.
After launching iTunes, you need to click on the button with the iPhone image, which should be closer to the upper left corner of the program window. If this button is not present, then you need to check the connection. Try disconnecting iPhone from your computer and reconnecting. Do not use USB extension cords, adapters, or non-original cables. Synchronization with your computer may not work if you use them.
After clicking on the iPhone button, a section with information and device settings will appear in front of you. Here you can find out the storage capacity, iOS version, serial number. Also here are the settings for synchronization, backup and restore.
At the bottom of the iTunes window there is a “Sync” (or “Apply”) button with which you can start syncing iPhone with your computer.
If necessary, you can sync not the entire iTunes library, but only individual data. In this case, before starting synchronization, you need to change the settings. For example, you can go to the “Music” section, the link to which is on the left side of the window, and enable or disable music syncing.
Optionally, you can synchronize either all the music (the “Entire Library” option) or only the selected one (the “Selected playlists, artists, albums and genres” option).
Similar settings are available for movies, TV shows, and photos. You can find links to related topics on the left side of the iTunes window Sync iPhone to your computer over Wi-Fi
As already mentioned, the iPhone can be synchronized with a computer not only via USB, but also via a Wi-Fi network. In order for this method of synchronization to work, several conditions must be met:
The latest version of iTunes must be installed on the computer;
In the iTunes settings for this device, the option “Sync over Wi-Fi” must be enabled;
iPhone must be connected to a charger;
Both the computer and iPhone must be connected to the same Wi-Fi network;
So, in order to sync your iPhone with your computer via Wi-Fi, you follow all the same steps that are described at the beginning of the article. You need to connect your iPhone via cable, launch iTunes and click on the device button in the upper left corner of the window.
Next, you need to enable iPhone Wi-Fi sync and save the settings by clicking on the “Finish” button.
Next, you need to connect the iPhone to the charger, open the “Settings” application on it and go to the “General. Synchronization with iTunes via Wi-Fi”.
After that, you need to click on the “Synchronize” button.
If everything was configured correctly, the iPhone will start syncing with the computer via Wi-Fi
Why iPhone won’t sync with computer via iTunes
If you are having problems syncing your iPhone with your computer via iTunes, then the first thing to check is the following options:
iTunes requires an update. If you have installed iTunes for a long time, then it may be outdated and requires updating. Try to install the latest version of the program from the official website and try again.
You are using a USB extension cable, adapter or non-original cable. To successfully sync iPhone with your computer, it is advisable to use only the original cable.
Synchronization is blocked by antivirus. In some cases, the antivirus software on your computer may be blocking the synchronization process. Try disabling your antivirus and try again.
If syncing via Wi-Fi does not work for you, then the reason may be the following:
Wi-Fi sync has not been enabled for this device;
iPhone is not connected to a charger;
The computer and iPhone are not connected to the same Wi-Fi network;
How to Reflash iPhone 7 via iTunes?
How To: Connect iPhone to Computer via USB. Go to the device management section. Hold down the Option key for Mac or Shift for Windows and click the Refresh button. Select the downloaded firmware file and wait for the operation to complete.
How to remove passcode on iPhone?
On an older iPhone, go to Settings Touch ID & Passcode. On devices that don’t support Touch ID, go to Settings Password. This section contains various parameters and functions. Disable Passcode: Select this option to disable passcode.
How to unblock iTunes?
If you have security questions assigned to your Apple ID, or if you don’t have access to a trusted device or phone number, go to iforgot.Apple.com. Then you can unlock your account with your existing password or reset your password.
How to unlock iPhone if it is locked forever?
On the iPhone go to “Settings” and “Find iPhone”. Enter your Apple ID and password. Here again they remind that the account is locked. Click on “unblock”.
What to do if iPhone is disconnected connect to iTunes?
What does it mean iPhone is disabled This always means one thing. the iPhone is locked after entering the wrong password to protect against a possible hacking attempt. There are 4 reasons for disconnection: You entered the password incorrectly several times in a row.
Why Can’t Sync iPhone to iTunes?
It often happens that iPhone won’t sync with iTunes. The reasons for this error can be different: a failure in the device itself, an outdated version of the program, a damaged USB cable. However, there is a way out of this situation. Solve iPhone and iTunes sync problems.
How to unblock an account on a computer?
Press CTRLALTDELETE to unlock. Enter the credentials of the last logged on user and click OK. After the Remove Computer Lock dialog box disappears, press CTRLALTDELETE and log in as usual.
What is iTunes
The Genius function analyzes the user’s media library, then recommends media products that match his preferences. The player streams media, creates a home collection, synchronizes. If you don’t know how to connect iPhone to iTunes, see the recommendations in this article. For correct operation, you must connect, then configure the parameters.
The next time you connect your phone to your computer, iTunes will sync everything automatically, creating a backup copy on your smartphone along the way.
You just bought a brand new phone and for the first time are going to connect it to a media player. First, you need to install iTunes on your computer, it does not take much time, you only need to follow a few steps.
- Go to the official Apple website, download the installer for iPhone.
- Enter your mail address, location.
- Select the version for your OS by specifying the bit depth.
- Select language, click on the button to download.
- Click on the downloaded file, follow the instructions.
- Restart your computer for a complete installation.
Synchronization over Wi-Fi
Let’s take a look at how to sync iPhone with iTunes over a wireless connection.
You need iTunes version 10.5 or higher, iOS version 4 or higher on your smartphone.
- Download installer, install, run.
- Connect with iPhone USB cable.
- Select your smartphone from the list that appears in the program window.
- On the “Overview” tab, find the item “Synchronize with this device via Wi-Fi”.
- Your smartphone will appear in the left column, go through the tabs, choosing the synchronization options.
- Apply changes.
Connect iPhone to iTunes
Among the various file third-party file managers for iPhone, AppleTV, iPod, iPad, this one stands out for its prevalence and popularity. Every iPhone user has iTunes. So why do you need it and how to connect iPhone to iTunes, how to sync the necessary media files? Consider in order.
Disconnecting from a computer
To disconnect your phone from your computer after you have finished using it, first click the small icon next to the iPhone button. Then disconnect the smartphone from the computer.
If the iPhone is disconnected, connect to iTunes, it’s easy. When connecting for the first time, follow the recommendations described above, when reconnecting, the iPhone will automatically connect.
Reasons for the error
The error “iPhone (iPad) is disconnected, connect to iTunes” occurs because the wrong code was entered when unlocking the device. over, this problem does not appear immediately. For the phone to display the error message “iPhone is disconnected, please connect to iTunes”, you must enter the wrong password more than 10 times.
This protection system is used in case the phone is stolen. The protection works as follows:
- The user enters the wrong PIN code 6 times. Iphone is blocked for 60 seconds and gives a warning “iPad or iPhone is disabled, repeat, after 60 seconds”
- Then, if you enter the wrong password, the lock is kept for 5 minutes. After one more attempt 15. If the 9th attempt is unsuccessful, then the smartphone is blocked for 60 minutes.
- When there are 10 unsuccessful attempts to unlock the iPhone, then it is completely locked.
It is not possible to do this by chance. Of course, there are times when the user just forgets the password. But in this case, you can prevent blocking by making other attempts to gain access.
iPhone is disabled connect to iTunes. how to open without data save itunes
What to do if iPhone or iPad is locked and asks to connect to iTunes
Owners of iPhones or iPads began to frequently encounter a malfunction when the device disconnects from iTunes with the error “iPhone is disconnected, connect to iTunes”, in which case you can unlock the device yourself without contacting an apple technology repair service.
How to avoid blocking
To prevent the smartphone from being blocked when entering 10 incorrect passwords, it is worthwhile to put the device into automatic erasing mode in advance. This will prevent your iPhone from locking up and taking less time to recover as you don’t need to use a PC. You can do it this way:
- Go to settings and go to the section “Touch ID and code”.
- Enter a password to provide access to closed OS sections.
- On the function of erasing data, switch the slider to active state.
You also need to set up cloud backups. So, when you reset all data, you can quickly get back all iPhone contents.
If the blocking occurred by accident, and the owner of the phone remembers the password, you can use a method that will save all the contents of the device. You need to do the following:
- Requires iTunes to be installed on a Windows or Mac computer.
- Activate the program and connect your smartphone using your own cable. It happens that this is enough and the iPhone allows you to re-enter the password.
- If the lock has not been removed, then you need to synchronize the smartphone with the program.
- The connection to the phone starts. It needs to be stopped by simply closing the window. After that, the error will be eliminated.
This method can be used an unlimited number of times. But it will suit users who remember their password.
Find My iPhone
If the “Find Athos” function was previously connected to the phone, then it is possible to change the password remotely. Everything happens according to the following scheme:
- Go to iCloud and log in with Apple ID.
- Select the desired device in the list.
- Click on the “Erase iPhone” button.
After that, the smartphone should stop requiring a connection to iTunes and you can try to enter the password again.
If the previous methods did not help and the iPhone or iPad still says “the device is locked, connect to iTunes”, you can use the recovery mode. It works in much the same way as a hard reset. To implement it, it is enough to reproduce the following steps:
- Click on the volume up button after decreasing. Then hold down the power key until the picture appears on the screen.
- Owners of model 6S and below need to click simultaneously on power on and “Home”.
- Then connect the phone to the PC. And do the recovery.
Complete device reset
If other methods do not help or it is not possible to implement them, it remains to reset the phone to factory settings. This is done as follows:
- Connect phone to computer.
- Select a device in the program.
- Click on “Restore iPhone”.
After completion, the smartphone will return to the “out of the box” state.