How to enable lte on iPhone

Table of Contents

Which iPhones support LTE (4G)

Not all Apple iPhone models support LTE (4G) networks. The first models support work only in lower-speed 2G and 3G networks. In the line of Apple phones, the LTE communication module first appeared in the iPhone 5. Therefore, if you want an iPhone with fast Internet, take the iPhone 5 or later.

The LTE module is constantly being improved, therefore, the newer the iPhone model, the higher the maximum data transfer rate in LTE networks. For example: maximum bandwidth of LTE modems:

  • iPhone 5, 5C, 5S. 100 Mbps.
  • iPhone 5SE, 6, 6 Plus. 150 Mbps.
  • iPhone 6S, 6S Plus. 300 Mbps.
  • iPhone 7, 7 Plus. 450 Mbps.

True, our mobile operators are not so quick to keep up with updating their equipment to comply with the new LTE standards, but this is gradually happening.

Apple iPhone. turn on 4G LTE

The segment of the mobile Internet is only growing every year, if yesterday we used computers to access the network, today the iPhone copes with many tasks in the field of Internet surfing, and after mobile devices, the data transfer speed is also growing. Today we will focus on the high-speed Internet settings using the example of Apple iPhone. Therefore, if you have already connected and configured the Internet in the iPhone, then this topic will be interesting.

What is LTE and 4G in iPhones

I will explain in simple language for dummies. LTE and 4G are mobile communication standards that allow you to use the Internet at higher speeds. Therefore, if your iPhone supports LTE (4G), then the Internet will be fast, i.e. Internet pages open quickly, video looks in high quality without brakes. With tuned LTE, it will be more comfortable to distribute the Internet to other devices using. Modem mode in iPhone.

How to enable and configure LTE (4G) on iPhone

If your iPhone model supports high-speed Internet (see the list above) and you have already configured the Internet (link to the setting at the beginning of the article), then you just need to turn on LTE mode and use.

LTE (4G) is enabled as follows: Settings. Cellular. Data Options

Enable LTE? This cellular network is not certified by the carrier for LTE on iPhone. This can affect battery life, calls, text messages, answering machine, and cellular data. I press Enable LTE.

As soon as you turn on the LTE mode, you will immediately feel a good Internet speed, of course, a lot depends on the cellular operator, so when choosing an operator and a tariff plan, check if there is support for working in LTE networks. Well, watch the traffic, with LTE enabled, limited traffic on the iPhone flies away well!

How to enable 4G LTE on iPhone and how the speed differs depending on the model (from iPhone 5 to iPhone XS)?

Finally, domestic operators began to expand and improve the quality of LTE coverage at the periphery. The data transfer speed relative to the good old 3G is, of course, phenomenal. It remains to enable support for this wireless standard in your iPhone or iPad. About why it is needed, how to do it and on which iPhone models it is generally possible, read this material.

What does LTE (4G) give? Advantages and disadvantages

Of course, the main advantage of LTE (4G) is the data transfer rate. Web pages and other multimedia content will load much faster, and when using your smartphone in modem mode, you will get a higher level of comfort when working on a PC. But do not forget that the use of LTE (4G) networks leads to a faster discharge of the device. Even iOS itself speaks of this when switching in the settings.

Which iPhones support LTE (4G) and what is the data transfer rate?

Not every iPhone has an LTE module on board. It first appeared on the iPhone 5. But another caveat is that each new generation of iPhone uses a more advanced LTE module that can provide more bandwidth. The maximum baud rate, depending on the device model, is as follows:

  • iPhone 5, 5c, 5s. up to 100 Mbps.
  • iPhone SE, 6, 6 Plus. up to 150 Mbps.
  • iPhone 6s, 6s Plus. up to 300 Mbps.
  • iPhone 7, 7 Plus. up to 450 Mbps.
  • iPhone 8, 8 Plus, iPhone X, iPhone XR. up to 600 Mbps.
  • iPhone XS, XS Max. up to 1 Gbps

Of course, these indicators can be significantly lower depending on the channel width provided by the operator, the distance and workload of base stations.

How to enable LTE (4G) on iPhone and iPad

If the cellular data network is already configured, then it will not be difficult to enable LTE (4G):

Open Settings.> Cellular.> Data Options.> Voice & Data.

Check the box next to LTE. In the pop-up message, click “Enable LTE”.

You can check the speed of the Internet connection using the free utility Speedtest.

How to enable 4G LTE on iPhone

Open the menu “Settings”. “Cellular”.

Make sure cellular data is turned on: the switch should be green. After that go to the “Data Options” menu.

Move the toggle next to On. LTE ”to the right. That’s it, you are connected to high-speed internet.

Tip: In the same menu, you can enable the “Data Saving” function. It allows applications on the iPhone to spend less traffic on background updates and other processes necessary for the correct operation and display of content.

The function will be useful for users with tariffs that have a limit on the use of LTE. Note that while iOS 13 is in beta testing, not all applications are able to save user traffic.

How to enable 4G LTE on iPhone

Several taps on the screen. and you are using fast Internet.

4G networks are much faster than 3G. If you are using an iPhone and are connected to a plan with high-speed Internet access, web pages should load instantly and YouTube videos should play without delays. Alas, sometimes not everything works as expected. Today we will tell you how to enable 4G LTE on iPhone, check connection status and fix possible problems.

Not all iPhones are 4G capable. If you have an iPhone 4S or older, you won’t be able to use this data transfer standard. The list of compatible models is as follows:

  • iPhone 5, iPhone 5c, iPhone 5s, iPhone SE
  • iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus
  • iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus
  • iPhone X, iPhone XR, iPhone XS, iPhone XS Max

Owners who find their iPhone on the list can go to settings and turn on 4G.

How to check 4G LTE status and fix network connection problems

When LTE or 4G is displayed in the status bar at the top of the screen. everything is OK, you are connected to high-speed Internet. If there is no label, web pages are loading slowly or not opening at all, try restarting your iPhone and resetting network settings one by one.

How to reset network settings

Open the menu “Settings”. “General”. “Reset” and select the option “Reset network settings”.

Enter the passcode and confirm the factory reset again by clicking the “Reset settings” button. This will reset your cellular and Wi-Fi settings to factory defaults.

READ  How to reset a call on iPhone

In cases where the 4G network is not available even after a factory reset, it is better to contact the operator for help. Probably, the problem is on his side, and you cannot solve it on your own.

We hope today’s tutorial helped you figure out how to enable 4G LTE on iPhone. If you still have questions, ask them in the Комментарии и мнения владельцев or in our group on VK.

How to enable and configure LTE

We figured out what the 4G Internet is, now we need to understand how to turn on 4 Gs on the iPhone. First of all, not only a smartphone with 4G support is bought, but also a SIM card that gives access to the technology. It must be marked accordingly. Next, you should insert a SIM card into the device and you can turn on the mobile Internet.

  • Go to the “Cellular” section.
  • In the item “Cellular data” you need to move the slider to the right.

This instruction is universal, because the interface is the same on all Apple devices. If you do not know how to enable 4G on iPhone SE. this guide will help you.

If as a result of these actions LTE did not turn on, then you need to figure out how to turn on the Internet on the iPhone manually.

How to enable LTE on iPhone 5 is divided into stages:

  • Opening the settings.
  • Go to the “Cellular” section.
  • Opening the “Data Options”.
  • Select the item “Enable LTE”.
  • Next, you should choose one of two options:
  • “Voice and data”. transfer of not only data, but also voice calls over the LTE network;
  • Data only. only data transmission is possible via LTE.

If the phone displays a warning about the lack of operator certification, press the LTE power button again. On this LTE is forcibly turned on and high-speed mobile Internet appears.

What are the LTE frequencies of operators in Russia

Russian operators are currently using different frequency bands to provide 4G Internet to subscribers. Among the topical ones are:

  • b3. from 1805 to 1880 MHz;
  • b7. 2620-2690 MHz;
  • b20. range 791-821;
  • b31. one frequency 450 MHz is used;
  • b38. 2570-2620 Megahertz.

Each operator uses his own frequency, which is reserved for him. But there are also cases when frequencies are used by two operators, usually in less developed regions. But the question of how to enable 4G on the iPhone 5s does not become more difficult, because the task of fine-tuning the frequencies is the operator’s concern.

What is 4G and LTE

To put it simply, 4G is a fourth-generation mobile network with improved data rates. The minimum indicator of the Internet speed of the network of this standard is 100 Mbit / s, while for stationary subscribers, which include those moving at a speed of less than 10 kilometers per hour, the minimum speed will be 1 Gbit per second.

When comparing 4G with the previous generation of 3G mobile networks, the speed increased more than 50 times, since the outdated technology for stationary subscribers only gave out 2 Mbps. But, in addition to 4G, you can often hear the name LTE, and for some mobile users this abbreviation is displayed when the mobile Internet is turned on.

The fact is that 4G networks consist of two data transmission standards:

  • LTE. used for portable devices such as telephones;
  • WiMAX. for stationary equipment.

How to enable LTE on iPhone 5. sometimes it becomes a problem. The fact is that this phone works in unpopular bands and gives access to high-speed networks only if the operator has taken care of it.

As a result, it turns out that it is impossible to separate LTE from 4G, since this is a component of the fourth generation Internet. The use of 4G networks in smartphones speeds up battery discharge, as it requires more power to operate the module. Nevertheless, the question of how to enable LTE on the iPhone 8 remains urgent.

How to enable 4G and LTE on iPhone

The majority of iPhone users use mobile internet on a daily basis, the standards of which are constantly rising. The most advanced and advanced technology is 4G, which is also called LTE. Its user gets the speed higher than in the case of 3G, but it is important to figure out how to enable LTE on the iPhone 7.

Often, the new generation Internet is activated in a smartphone automatically when it is in this network. How to enable 4G on iPhone 5s. many ask, and all because not everyone is tech-savvy. Therefore, in the question of how to forcibly turn on 4G on the iPhone, we will figure it out thoroughly.

Which iPhones support 4G

Not every iPhone has built-in support for new networks, for example, in the iPhone 4S and below, this technology is no longer there. Therefore, even with the appropriate SIM card, the maximum that the owner of the phone can count on is 3G.

In the case of iPhones, LTE support starts from the iPhone 5, and the highest data transfer rate depends on the smartphone generation:

  • iPhone 5, 5s. up to 100 Mbps;
  • SE, 6 and Plus version. 150 Mbps;
  • 6s and larger version Plus. 300 Mbps;
  • 7th model and “plus” format. 450 Mbps;
  • iPhone 8 (including Plus size) and smartphones X and XR. 600 Mbps;
  • The XS and Max versions hold the record for bandwidth, as they provide Internet access up to the maximum network performance. 1 Gbps.

It should be borne in mind that the specified speed can be much lower, which depends on the quality of coverage, the number of subscribers at base stations and their distance from the user. If a subscriber whose smartphone supports LTE is in an area where such technology is not yet available, he will not be left without the Internet.

The fourth generation modules also support downstream networks, so 3G networks and even EDGE will be included. Therefore, you do not have to think about how to enable LTE on the iPhone 5S, and where to find coverage, since you can continue to use a less comfortable, but still fast 3G connection.

Possible causes of problems

Why LTE won’t turn on on iPhone is also a common question, and there are three reasons for this:

  • There is no appropriate operator coverage in the client’s presence area.
  • User does not have a matching SIM card.
  • The smartphone itself is not equipped with an LTE module.

If you have problems with 4G networks, you should immediately contact the technical support of the operator. Consultants will tell you why the problem occurred and advise how to turn on 4g Internet on iPhone.

Is it possible to make the phone support 4g?

  • In the “Settings” section, select “Other networks”.
  • Select “Mobile networks” in the menu.
  • After that. “Network Mode”.
  • In this section, select the item “LTE / WCDMA / GSM” required for 4G connection.
  • Internet connection occurs without restarting the smartphone.

How to connect 4g on iPhone 5?

How to enable LTE (4G) on iPhone and iPad

Go to Settings → Cellular → Data Options → Voice & Data. 2. Check the box next to LTE. In the pop-up message, click “Enable LTE”.

How to switch from 3G to 4G on iPhone?

Open the settings and go to the “Cellular” section.

  • Find the item “Data Options” and go into it.
  • Next, select “Voice and Data”.
  • Finally, in the list that opens, select LTE.

How to put only 4g on Xiaomi?

1) Go to Settings — About phone. 2) Press “Memory” five times. 5) In the list that appears, you can select the type of network. For example Only LTE. only 4G, TD-SCDMA and WCDMA. only 3G.

What to do if LTE does not work?

Here’s what you can do if LTE isn’t working on your phone.

  • 1 Turn Airplane Mode on and off
  • 2 Reboot your device
  • 3 Make sure the correct network mode is enabled
  • 4 Remove and reinstall the SIM card
  • 5 Make sure you are using the correct SIM slot
  • 6 Reset network settings

How to do only 4g on Xiaomi?

So, if you really need 4G and 4G, then we do the following:

  • open the “Phone” application and type ### from the keyboard
  • in the list that opens, select LTE / CDMA / UMTS auto (PRL) (td-scdma is Chinese 3G);
  • tap the “Back” button, return to the main screen and reboot the smartphone.

What is VoLTE HD?

VoLTE. next generation voice communication

Voice over LTE technology transmits a call over a high-speed 4G (LTE) network. Voice stream is delivered many times faster and in better quality.

What to do if LTE does not work?

The path to this feature may vary slightly depending on your Android version and phone manufacturer, but you can usually turn on Airplane Mode by going to Settings Wireless & networks Airplane Mode. Turn it on for at least a couple of seconds, then turn it off. In many cases, your LTE connection problems will go away.

Why LTE doesn’t work on iPhone 7?

If iPhone 7 is not receiving LTE signal for no apparent reason, try the following: Check “Cellular”. “Voice & Data”. LTE settings. Turn on / off airplane mode

How to make only 4g work?

  • After opening the application, you need to write in the search “about the device” select “settings” then “device information”.
  • After that you need to select “view”
  • The settings will open in the column “set preferred network type” and select “LTE only”

How to turn on mobile internet on iPhone 11?

How to enable mobile (cellular) Internet on iPhone or iPad

Go to “Settings” and select the “Cellular” section. Tap the slider to the right of the “Cellular Data” label. it will turn green, and the letter “E” or the word GPRS will appear to the right of your operator’s name. We just went online!

How to put only 4g on Xiaomi?

1) Go to Settings — About phone. 2) Press “Memory” five times. 5) In the list that appears, you can select the type of network. For example Only LTE. only 4G, TD-SCDMA and WCDMA. only 3G.

How to check if the phone has LTE?

Go to the “Settings” section, select the subsection “Mobile / Cellular networks”, then find the sub-item “Preferred Network Type / Mode”. If the option “4G / LTE” is available here, it means that the phone works with 4G.

READ  How to connect two pairs of headphones to an iPhone

How to enable data transfer on iPhone?

To turn on cellular data on your device, follow these steps:

  • Open the “Settings” menu.
  • Select from the menu: iPhone (iOS 6): “General” → “Network”; iPhone (iOS 7 and above): Cellular; iPad (iOS 6 and above): Cellular Data.
  • Turn on the “Cellular Data” toggle switch. Related Articles

What to do if LTE does not work on iPhone?

I stopped seeing LTE iPhone 7.… If iPhone 7 is not receiving LTE signal for no apparent reason, try the following:

enable, iphone
  • Check the settings “Cellular”. “Voice & Data”. LTE.
  • Turn on / off airplane mode
  • Reboot your device;
  • Install the latest iOS updates;
  • Perform “Reset network settings” from “Reset”

How to enable LTE on iOS 12?

On iPhone, go to Settings Cellular Data Options and tap Turn LTE On, or go to Settings Mobile Data and tap Turn LTE On. If your carrier supports Voice over LTE (VoLTE), the options below will be displayed. May 21, 2019.

What to do if LTE does not work on iPhone?

If iPhone 7 is not receiving LTE signal for no apparent reason, try the following:

  • Check the settings “Cellular”. “Voice & Data”. LTE.
  • Turn on / off airplane mode
  • Reboot your device;
  • Install the latest iOS updates;
  • Perform “Reset network settings” from “Reset”

How to set up an LTE network?

  • Open the device menu.
  • Select “Settings”.
  • Select the “Connections” item / tab.
  • Select “Mobile networks”.
  • Select “Network Mode”.
  • Select network mode (2G = GSM, 3G = WCDMA, 4G = LTE).
  • Network mode changed.

What to do if LTE does not work?

Here’s what you can do if LTE isn’t working on your phone.

How to Fix 3G/4G/LTE Problem on iPhone

  • 1 Turn Airplane Mode on and off
  • 2 Reboot your device
  • 3 Make sure the correct network mode is enabled
  • 4 Remove and reinstall the SIM card
  • 5 Make sure you are using the correct SIM slot
  • 6 Reset network settings

How to check if the phone has LTE?

Go to the “Settings” section, select the subsection “Mobile / Cellular networks”, then find the sub-item “Preferred Network Type / Mode”. If the option “4G / LTE” is available here, it means that the phone works with 4G.

How to enable 4G on iPhone?

How to enable LTE (4G) on iPhone and iPad

Open Settings → Cellular → Data Options → Voice & Data. 2. Check the box next to LTE. In the pop-up message, click “Enable LTE”.

How to enable mobile data on iPhone?

To turn on cellular data on your device, follow these steps:

  • Open the “Settings” menu.
  • Select from the menu: iPhone (iOS 6): “General” → “Network”; iPhone (iOS 7 and above): Cellular; iPad (iOS 6 and above): Cellular Data.
  • Turn on the “Cellular Data” toggle switch. Related Articles

Why doesn’t LTE show on iPhone?

If iPhone 7 is not receiving LTE signal for no apparent reason, try the following: Check “Cellular”. “Voice & Data”. LTE settings. Turn on / off airplane mode

How to make iPhone work in LTE only?

On iPhone, go to Settings Cellular Data Options and tap Turn LTE On, or go to Settings Mobile Data and tap Turn LTE On. If your carrier supports Voice over LTE (VoLTE), the options below will be displayed. May 21, 2019.

How to make only 4g work?

  • After opening the application, you need to write in the search “about the device” select “settings” then “device information”.
  • After that you need to select “view”
  • The settings will open in the column “set preferred network type” and select “LTE only”

How to find out if there is 4g on the phone?

Thanks to this, users can easily learn about compatibility with the 4G standard of both the phone (dial the combination 2455 # and then the call button) and the SIM card (dial 2454 # and call).

What to do if mobile Internet does not work on iPhone?

Network does not work with normal coverage

  • Ask your operator about settings such as username and APN. This can be done on the official website or by calling technical support.
  • Open gadget settings.
  • Find and select “Cellular network” in them.
  • Open the “Data Transfer” tab.
  • Enter the required values.

How to change network mode on iPhone?

  • In the Settings menu, go to:
  • In the Cellular data and LTE settings sections, enter the parameters provided by the operator (APN, Username and Password).
  • Reboot your smartphone.
  • In the Cellular settings section, go to the Voice and Data section, select LTE.
  • We confirm the inclusion in the dialog box.

How to enable 4G LTE on iPhone: description, features, pros, cons and customization

Hello everyone! Now I will try to answer the question: what is LTE in the iPhone? LTE is a wireless communication standard that replaced 3G and opens up access to high-speed Internet for the owners of mobile equipment, modems and routers. LTE’s goal is to increase overall throughput (upload and download metrics) with new digital signal processing techniques and redesigned network architectures.

Features of LTE in Apple technology

NOTE! The indicated values ​​are largely unattainable in everyday life: the final results are influenced by the frequencies chosen by the operator, the location of the base stations, and the overall load on the network. But even with all the errors of 3G, such speed values ​​cannot be reached.

  • Frequencies. Russian operators rely on frequency bands around 1805-1880 MHz (the most common), as well as combinations like 2620-2690 MHz, 791-821 and 2570-2620.

The disadvantages and unpleasant features of LTE include increased requirements for battery capacity (the battery is discharged many times faster both when searching for the nearest base stations of a mobile operator, and at the time of downloading content from the network), and a slowly growing coverage map. The “new generation” Internet is not found in all regions of the Russian Federation, and therefore it remains only in large cities and regions to count on a speed of 100-150 Mbit / second.

How to enable LTE on iPhone and why nothing works

The parameters of wireless standards in iOS are selected in the “Settings” section, in the “Cellular” menu.

The list that opens contains details related to the selected operator, statistics of data downloads from the network, and parameters of current mobile connections.

And in the latter case, to access additional settings, you will first have to activate the “Cellular data” slider, and only after that, go to the thematic menu.

Further, setting up LTE comes down to a couple of actions: click on the “Voice and data” item, and then. forcibly activate LTE with VoLTE technology. if you wish, it is possible to disable VoiceOverLTE to reduce the quality of calls in order to save traffic. Alternatively, you can choose 3G as your gateway to the world of networking. How to enable LTE on iPhone?

The procedure is the same. Minor discrepancies are possible due to older iOS versions. If you cannot configure LTE, then before contacting support, you should go through the points below:

  • Why is LTE not included. Apple’s official support associates problems with new standards for wireless data transmission with an incorrectly selected SIM card, poor coverage (there are not enough LTE stations in the “home region”) and outdated Apple technology. Prior to the release of the iPhone 5, models like the 4S and earlier were not able to interact with new technologies. There are also problems with how to enable 4G on the iPhone. in some regions and countries, operators have already abandoned mobile networks with a special frequency range supported by a smartphone. As a result, even after choosing the necessary parameters and buying a SIM card, it remains to rely exclusively on 3G or 2G.
  • Software problems. If you encounter problems with finding LTE networks even in large cities on compatible Apple technology, the developers recommend first toggling the “Cellular” slider and then restarting the iPhone. If nothing has changed, you will have to reset the network settings in the iOS settings.

Thematic settings are hidden in the “Basic” section, in the “Reset” sub-item. After going to the menu from the list of actions that appears, it remains to select “Reset network settings”.

Enable LTE on iPhone

The procedure in some cases involves entering the password set in the system, as well as restarting the iPhone.

After the reset, you do not need to copy the settings presented on the official website of the mobile operator: iOS will automatically adjust to the required operating mode.

How to disable LTE on iPhone of various modifications?

The advantages of the LTE Internet module (lte), or simply 4G, are undeniably many. the speed of data transfer and work on the Internet is many times faster than in the 3G module. However, not everyone thinks about the fact that periodically it is worth turning off the lte.

Today in the article we will tell you in detail why you need to disable lte on the iPhone, and we will provide step-by-step instructions for this simple process, provided with photo and video instructions for your convenience.

Disable LTE: step by step instructions

So, to turn off lte on iPhone, follow these steps:

  • Go to Settings, swipe down to the “Cellular” section and open it.

Open Settings to disable LTE on iPhone.

Select the “Cellular Data” menu section, go there to find the shutdown settings.

  • We go to the item “Data Parameters”, from it. in the “Voice and data” menu, and in the opened options, put a tick opposite the inscription “LTE, VoLTE off.”.

We go to the “Data Parameters” section to go to the LTE disable settings

We open the item “Voice and data”, where we will find the settings for turning off LTE.

We put a mark in front of the point for disconnecting the LTE module.

Done! Now the 4G (LTE) module has been successfully disabled and the battery will last longer. When you need to reactivate LTE, the user will be able to do this by going through the appropriate steps described above in Settings, and checking the box next to the “LTE, VoLTE on” option. 4G module connection will be resumed.

To reconnect the LTE module, go through the same steps in the Settings, and return the checkmark opposite the LTE enabled item.

READ  Which iOS on iPhone 6

For which devices the article is suitable

The LTE internet module appeared with the release of the fifth generation iPhone. At the same time, given Apple’s commitment to continuous improvement, with each new iPhone model, LTE has been improved. The mechanism of actions for disabling LTE, described in the article, is suitable for the following iPhone models:

  • iPhone 5
  • iPhone 6/6 plus
  • iPhone 7/7 plus
  • iPhone 8/8 plus
  • iPhone X / XS / XR / XS Max
  • iPhone 11 / 11Pro / 11 Pro Max

The tutorial materials in this article were made using an iPhone 8 Plus.

Why disable LTE on iPhone

Despite the apparent advantages of the LTE module in comparison with the 3G module (Internet speed, high quality of transmitted content, etc.), it has one drawback that is significant for many users. always-on LTE drains the battery. There is a warning about this even in the iOS Settings themselves when switching them. Therefore, for those users who are interested in saving battery power, it is recommended to periodically disconnect the LTE module. for example, in cases where the Internet is not required, when you are sleeping or there is an active Wi-Fi connection.

enable, iphone

The shutdown mechanism is very simple, it is enough to do all the steps once, following the instructions, in order to then intuitively perform this process.

Disable 3G / LTE on iPhone

The user may need to restrict access to high-speed data transfer standards on the phone for various reasons, and one of the most commonplace is saving battery power.

IPhone Settings

In the next window go to the item “Data parameters”.

Set the desired parameter. For maximum battery saving, you can check the box next to “2G”, but at the same time, the data transfer rate will be significantly reduced.

  • When the required parameter is set, just close the settings window. the changes will be applied immediately.
  • How to disable LTE / 3G on iPhone

    Airplane mode

    iPhone provides a special flight mode, which will be useful not only on board an aircraft, but also in cases when you need to completely restrict access to mobile Internet on your smartphone.

    Tap the plane icon once. Airplane mode will be activated. the corresponding icon in the upper left corner of the screen will tell you about it.

  • In order to restore access to the mobile Internet to the phone, call the Control Center again and tap again on the familiar icon. the flight mode will be immediately deactivated, and the connection will be restored.
  • If you could not figure out how you can turn off 3G or LTE on the iPhone, ask your questions in the Комментарии и мнения владельцев.

    How to enable 4G on iPhone

    Many users don’t know how to enable 4G on iPhone, but it’s actually not as difficult as it sounds. First, you need to check if the smartphone has this function. This should be written in the technical specifications of the gadget. It is also worth making sure that the SIM card has a connected Internet access service. Otherwise, the subscriber will not be able to access the network, or risk losing money from the mobile balance.

    The user figured out what LTE is in the iPhone, now you should enable this service. To do this, go to settings and open “Cellular”. Here you need to find functions such as “4G LTE” and “Data transmission”. It is necessary to enable each of the options if they are disabled.

    If they are turned on, but there are some problems with the Internet, then this means that the smartphone does not pick up the signal from the tower. The operator’s tower may be too far from the person’s location. In addition, the reason may lie in the lack of traffic. This can be checked with the mobile operator.

    Often the internet does not work due to the fact that the APN name is not configured. To configure the name of the access point, you need to go to the settings and go to the parameters of the cellular network. Next, you need to set the name of the access point. The name depends on the subscriber of which operator the user is. If it is Beeline, then you need to enter internet.billine.ru. You can find out the name of the access point by contacting the operator.

    How to disable LTE on iPhone

    In some situations, the owner of the gadget needs to know how to disable LTE on the iPhone. This function, like any other, wastes battery power, in addition, the mobile Internet must be turned off during flights. To disable the option, you need to go to the settings and open the “Cellular” tab. In the line “4G LTE”, you need to change the checkbox from enabled status to disabled.

    Which iPhone models are capable of supporting 4G

    Unfortunately, not all iPhone versions support the latest generation communication type. Therefore, the question: LTE, what is it in the iPhone, arises only for users of new models. After all, they have not met with such a function before. Earlier models of smartphones were released before the launch of the technology, they have only such communication standards as 2G and 3G, they do not have the fourth type of communication, and even more LTE.

    The technology was first introduced into iPhones 5, 5 s and se. The developers have released two versions of the fifth iPhone model. with and without 4G. It is logical to assume that the first option is more expensive than the second. After the first sales of a new smartphone at that time, buyers immediately began to ask about LTE, what is it in an iPhone phone, because the function is new and incomprehensible. But soon the majority could no longer imagine the iPhone without this option in it. LTE is easy enough to turn on and can be turned off just as easily.

    Does 4G support iPhone 5

    As mentioned earlier, the company has released 2 versions of the 5 model. The first version lacks 4G, so it costs a little less than a gadget that has both 4G and LTE.

    What does 3G, 4G and LTE mean in iPhone

    All of these cryptic symbols are actually indicators of the type of signal the smartphone is currently using. If the data transmission range is small, then the user will see the letter “E”, which is an abbreviation of the name of the “Edge” network. This network provides the phone with the ability to access the Internet. The rest of the designations are deciphered according to the same principle. For example, if the symbol “G” appears in the top line, it means that the smartphone has access to the “GPRS” network.

    At present, any smartphone owner will have no difficulty in accessing the Internet, watching videos through it, listening to music, downloading something or transmitting any information. Now this is taken for granted, but just a few years ago, information technology was not so advanced. People had to wait for a long time to download a movie, music, video. And there was no question of video communication.

    Fortunately, experts worked on this and soon presented the world with 2G, the second generation communication standard. It gave the user access to the Internet, but its frequency range was not enough to cover a large area. The operators tried to solve the problem and began to place a large number of towers at such a distance from each other that there were no “empty” zones between them.

    This was extremely inconvenient and costly, so the specialists were looking for a new solution. Soon, 2.5G was created, which provided a higher level of communication at the expense of a larger coverage area. But this type did not last long, because in 2000 it was replaced by the third generation standard, which includes as many as 3 types of packet data transmission. 3G has faster internet speeds than its predecessors.

    enable, iphone

    Note! Thanks to 3G, users were able to communicate via video communication, view content online and use the Internet on the move without interruptions.

    The fourth generation was created in 2008, its speed exceeds 100 Mbps. This type of communication is optimal due to the fast Internet connection. Long-Term Evolution (LTE) came alongside 4G. Initially, this technology was used in 3G, and then it began to be used in the 4th generation. In simple terms, LTE is a kind of “accelerator” for the mobile Internet. When this function is enabled, the data transfer rate increases and the smartphone can easily switch to a convenient communication type. LTE also makes it possible to improve the quality of communication when forwarding.

    How to Switch or Change 3G to 4G on iPhone

    To switch the mode, just go to the settings and go to the “Cellular networks” section, where you can find the mobile data transfer. A person will see a list from which he can choose the communication standard that suits him.

    Depending on the choice of the type of mobile data transfer, the smartphone will access the Internet at different speeds. Also, communication standards affect voice calls. Sometimes, poor signal quality may cause a call to be interrupted or intermittent. Therefore, for the best forwarding, it is recommended to turn on 3G or 4G.

    How to set up the LTE function

    With newer iPhones, you can customize LTE to your liking. For example, improve the sound quality of a voice call through faster data transfer, as well as improve the speed of the Internet. Before turning on LTE on the iPhone, you should figure out if the phone supports this option. This can be viewed by going to the tab “Cellular networks”.

    Important! Some telecommunication networks do not provide for LTE communication type.

    If the subscriber has access to the LTE function, he can turn it on or off. If there is no such function, then the user can turn off the Internet, or 2G, 3G or 4G.

    BICBON.COM 2021