How to enter BIOS Samsung

How to enter BIOS of a Samsung laptop: method 1

Samsung has created its own software called Samsung One Key Recovery, a system that includes the ability to back up and restore data to Samsung’s PC. In order to turn it on, there is an additional button on the laptop. Novo. It is found on almost all the latest models of laptops from Samsung and is located either on the side panel of the case, or near the power button.

enter, bios, samsung

Sometimes, in the most modern models, there is a small hole inside which there is a microswitch. In this case, you need to use a thin, non-sharp object. for example, a paper clip.

And despite the fact that the direct purpose of this button is not to call the BIOS, you can still get into the BIOS using it:

  • Turn off the device by holding down the power key for 10-15 seconds;
  • Hold the Novo key for 2-3 seconds and release;
  • Your laptop turns on and opens a small menu with a choice. click on the line with the signature “BIOS Setup”.

Entering BIOS on a Samsung laptop: method 2

Entering the BIOS on a Samsung laptop is carried out in several ways. unfortunately, there is no single solution for how to get into the BIOS for everyone, but the ways to launch it are quite simple. So, let’s move on to the first method.

The most popular solution is to use a keyboard. pressing several buttons at the same time on the laptop immediately after starting it up. Turn off your laptop (this method will not work with enabled), then press the power button and immediately one of the options:

  • F2 button or Del button;
  • Combination FnF2;
  • F1 key

If the BIOS was launched incorrectly, the computer will boot the OS normally. In this case, you will have to turn it off again and call the BIOS again, but using the new boot method. In order not to play the “guessing game” and start the BIOS faster, you can also look at the instructions for the Samsung laptop.

It also happens that the laptop starts up too quickly, and the user does not have time to press the required combination. To avoid this, turn off the laptop by holding down the power key for 10-15 seconds. Then hold down the desired combination to enter the BIOS, and then press the power button and release, while continuing to hold down the keys to enter the BIOS until the desired screen with parameters appears in front of you.

How to go to BIOS on a Samsung laptop: method 4

If you have Windows 10, then there is another way to boot the BIOS, similar to the previous one. Here it is implemented in a slightly different way:

  • In the “Start” menu, click on “Options”, select the “Update and Security” item;
  • Open the “Recovery” tab and click on restart under the “Special boot options” label;
  • The device reboots, and we see an action selection window. After you enter the desired menu, do the same as in the previous paragraph when starting BIOS on Windows1.

If, when using this or the previous method, you did not see the “UEFI Firmware Options” button on the screen, this means either that this laptop has an outdated BIOS version without UEFI, or that the OS was installed on the laptop in Legacy mode. Then work with UEFI is not available from the operating system. you will have to use the first two methods.

Entering BIOS on a Samsung laptop

Probably, there are no PC users who, at least once during the entire time of their work with a computer, would not need to enter the BIOS. Those who use Samsung products did not stand aside either.

This manufacturer has a huge list of laptops, and not all of them can enter the BIOS in the same way, but it is easy to configure it. the functions are the same everywhere. Today we will try to figure out how to enter BIOS in a Samsung laptop.

Why is there a need to enter BIOS on Samsung at all? Even despite the fact that laptop manufacturers in each new released model try to minimize the requirements for PC knowledge from the user and give the simplest answer to the question of how to configure it or determine the cause of problems, sometimes it becomes necessary to fine-tune the parameters. What you can use this input for:

  • Turning on and off some of the hardware parts of the laptop, diagnosing problems;
  • Configuring boot parameters for the OS and the entire device;
  • Setting up the disk subsystem, in particular, the modes of its operation;
  • Customization of many other functions, parts or system in general.

How to enter BIOS of Samsung laptop: method 3

Around the same time that a new BIOS version called UEFI was released, the new Windows 8.1 operating system was released. And along with it, a new way of loading BIOS appeared. through the OS:

  • First you need to go to your desktop. Then we call the side menu of the Windows desktop. to do this, move the mouse cursor to the lower right corner of the desktop. Select “Settings”. “Change computer settings”;
  • Then go to the menu item “Update and recovery”, and then under the line “Special boot options” press the restart button;
  • After the reboot has been completed, we get to the screen with the ability to select an action. Click on the “Diagnostics” tile and then on “UEFI Firmware Settings”;
  • Confirm the selection by clicking on the “Restart” button. Done, the laptop entered the BIOS!

How to enter BIOS

Notebook BIOS entry methods may differ on different Samsung models. First, try the standard login method. when starting a personal computer, you need to press the F2 button on the keyboard, sometimes holding down the Fn key before that. Next, the PC parameters menu will be called.

But this method is not always working. For some Samsung models, the BIOS does not load when you press F2 or FnF2. for example, Samsung Legion Y520, Samsung G70, G50-30, or G500. If you tried to enter the BIOS using the above method, and you did not succeed, the following instruction is for you:

  • On the side of the laptop (where the charging socket is usually located) or right next to the power button, there should be a special small key with a curved arrow. It’s called Novo Button, One Key Recovery, or One Key Rescue System. You need to turn off the laptop and click on it.
  • If you pressed the correct button, the laptop will start, and on the screen you will see that we are going to a special startup menu:

How to Boot Into Android Recovery Menu Mode on Samsung Galaxy A50s, A50, A40, A30, A20, A10, etc

  • Normal Startup
  • BIOS Setup (parameters);
  • System Recovery (system recovery);
  • Boot Menu.
  • As you probably already guessed, in order to enter the BIOS on Samsung, you need to go to the BiosSetup item. After you select it, you will see that the laptop entered the BIOS and you can configure it as you like.

How to enter BIOS on Samsung computers?

Samsung is one of the largest computer companies in the world. And since the demand for the products of this company is growing, the questions about the correct operation and operation of Samsung equipment are becoming more and more relevant for users. And for those who decided to reinstall Windows, at the very beginning of the process, the question is raised: how to enter the BIOS in Samsung?

First, you need to figure out what BIOS is and what it is eaten with. So, BIOS on Samsung is a special microscopic program that ensures correct and stable interaction between all components of the PC and OS and allows you to customize it. And the BIOS setting is a standard PC setting that helps the system calculate the functions that should be activated and how they should be loaded. BIOS is on any computer, be it Samsung B560, Samsung S21 or M5400.

To date, several different versions of Bios have been created, which differ slightly in appearance, but as for the functions, everything is identical here. Each of the versions is used for the initial setup of the computer and for checking it.

  • Date and time setting;
  • Selecting the boot sector. the device from which the operating system will be installed or loaded;
  • Checking system components, including checking the health of RAM and hard drives;
  • Connection protection. password on your laptop to protect personal data.
READ  How to Lock Samsung with 10

Two secrets of running BIOS

But if you still did not manage to start the BIOS using one of the above methods, and the laptop has Windows 8.1 or higher operating system, we will tell you two startup secrets.

  • You need to turn on the PC. In a running computer on the desktop, drag the mouse pointer to the lower right corner of the desktop (call the side menu).
  • A menu opens to us, where we select the items “Options”. “Update and Recovery”. “Recovery”.
  • Here, in the “Special boot options” section, click on the “Reload now” button.
  • Next, a blue screen with tiles will open. Open the “Diagnostics” tile, by clicking on which you will be taken to additional parameters.
  • You need to open the item “UEFI Firmware Options” and click the “Restart” button. Done! You are in BIOS!

Second secret. Many Win 8.1 users make an error when trying to enter BIOS. Everyone knows how to get into the BIOS. you need to press a certain button on the keyboard. To do this, the user clicks on “Shutdown”, waits for the laptop to turn off, and then presses the button to enter the BIOS, but the computer starts in the old way. the OS is loading.

The whole problem is that the Windows 8.1 operating system works initially with the fast startup function, which is based on sleep mode. enter the BIOS without turning off the PC, but restarting it.

Some helpful tips:

  • After entering the BIOS, go to the various settings of the system parameters and its boot in the BIOS itself. Be very careful and careful, and it is better not to touch what you do not know, as there is a risk of doing something wrong and completely losing your computer. And after making all the changes, go to the “Exit” section and select “Save exit”. After that, the laptop will be restarted, and on a new start, all the settings that you had to set before will already be taken into account.
  • If the above methods of entering BIOS on a Samsung laptop do not work, try holding down the F12 key when starting the device until the BIOS starts. this method works on some Samsung models.
  • It is very rare, but it still happens. in some models the F1 key works (you need to press it several times while the laptop turns on).
  • Manufacturers recommend adjusting PC settings in BIOS only with a fully charged laptop battery, since if during the setup process your laptop turns off due to being discharged, then this is likely to cause some system problems in the future.
  • Before exiting BIOS, be sure to save all changes so as not to get lost.

Remember that BIOS setup is a very serious step, requiring maximum understanding of the process and great attention to detail.

You should be aware that if the configuration is incorrect, some components of the system may not work correctly, which brings additional difficulties in operation. And if you doubt that you know how to do it right, it is better to call qualified specialists, this will save money, time and nerves. We hope this article helped you figure out how to enter BIOS.

Keys and their combinations

There are several models of laptops from Samsung. This includes budget lines and high-end products. For each of them, the manufacturer has its own button to enter the BIOS.

The standard key for entering the information input-output system is F2 or, in extreme cases, Del. To enter BIOS on Samsung laptop, user will need to do the following:

  • Reboot laptop.
  • During switching on, press the F2 button several times. A window with the settings of this program will open.
  • Now the user will be able to set the time, change boot disks or passwords for logging into Windows.

However, on some models the standard keys do not work. For example, for the following types of laptops, the keys to enter the host system will be different:

  • on RV 513. except F2. the user should try Del;
  • if the user has an ATIV Book 4 450R5E-X07 netbook, use the F8 button;
  • budget model NP 300. F2 key;
  • but on a Samsung NP300V5AH laptop, you will need to press the F10 key several times.

There are such types of laptops where you have to use two keys to enter the basic computer system. These include an advanced modification of the Samsung NP900X3E. On it you will need to click on the FnF12 button.

Attention! If none of the above buttons fit, then you need to look in the operating manual and find the desired key in it.

If it is absent, you need to find out the name of the motherboard and find an instruction manual for it on the Internet.

To find out which motherboard is on the laptop, you need:

  • Download AIDA 64 software.
  • Run it.
  • Click in the left window on the item “Motherboard”.
  • Go to Google and enter its name in the search bar.
  • Find a manual for her.

If Windows is installed and the owner of the device just wants to change the BIOS settings, then you can not use the keys, but immediately go into the system. This requires:

  • Hold down the Win C buttons at the same time. Win is the key with the Windows window icon.
  • A pop-up menu will open.
  • In it, select “Options”.
  • Left-click on “Change computer settings”.
  • Click “Update and Restore”.
  • Select “Special Boot Options”.
  • Click “Restart”.
  • Now the user will be in the laptop settings system or in the BIOS.

How to enter BIOS on a Samsung laptop

Samsung laptops do not occupy the first or third place in the sales niche, but nevertheless, many users buy these laptops and actively use them. However, in order to put the boot disks on a Samsung laptop in order to install Windows, for example, you need to enter the BIOS. on how to do this later in the article.

Program setting

If the entry into the BIOS was successful, then the laptop owner will see the main menu of the system. Here the user can change the time and set the date.

The next tab will be called “Advanced”. In it, the user can configure the video card or activate the hard disk write protection. In addition, the owner of the device is able to overclock the processor or hard drive. And also in this tab you can configure support for USB ports.

The next section is called “Boot”. It is needed to configure boot disks. In this tab, you can set priorities for loading hard drives. For example, to install Windows, you must install a USB flash drive or DVD ROM as the first boot device, if the process will take place from a CD.

The next tab is “Security” or security. Here the user will be able to set a password to login. Except him, no one else will be able to enter the laptop, or bypass the system.

Attention! BIOS information is given in general terms. On more modern devices or, on the contrary, outdated ones, the location of the settings and their number may change.

After the user has made all the necessary manipulations, they must be saved. For this you need:

  • Click on the F10 key.
  • In the dialog box, the user will be asked: “Exit and save the settings.” You need to select “Y” and click on it.
  • The computer will reboot and the user will enter the operating system with the updated settings.

Using the listed simple methods, the user will enter the basic system of his laptop and customize it for himself. The main thing is that while working with the BIOS, the computer is constantly recharged from the battery. Otherwise, the laptop that suddenly turns off during the settings may fail.

How to open BIOS on a Samsung laptop

When reinstalling the operating system or making deep adjustments to the computer settings, access to the BIOS is required. This section contains the basic system parameters to which the user usually does not have access. If you want to know how to open BIOS on Samsung laptop, keep reading this article.

The next tab will be called “Advanced”. In it, the user can configure the video card or activate the hard disk write protection. In addition, the owner of the device is able to overclock the processor or hard drive. And also in this tab you can configure support for USB ports.

The next section is called “Boot”. It is needed to configure boot disks. In this tab, you can set priorities for loading hard drives. For example, to install Windows, you need to install a USB flash drive or DVD ROM as the first boot device, if the process will take place from a CD.

The next tab is “Security” or security. Here the user will be able to set a password to login. Except him, no one else will be able to enter the laptop, or bypass the system.

Attention! BIOS information is given in general terms. On more modern devices or, on the contrary, outdated ones, the location of the settings and their number may change.

After the user has made all the necessary manipulations, they must be saved. For this you need:

  • Click on the F10 key.
  • In the dialog box, the user will be asked: “Exit and save the settings.” You need to select “Y” and click on it.
  • The computer will reboot and the user will enter the operating system with the updated settings.

Using the listed simple methods, the user will enter the basic system of his laptop and customize it for himself. The main thing is that while working with the BIOS, the computer is constantly recharged from the battery. Otherwise, the laptop that suddenly turns off during the settings may fail.

READ  How to turn on flash on Samsung A 50

Stage 1: how to enter the boot menu

There are two radically different ways.

The first is with a specially performed laptop reboot. This is the recommended way. The second is useful as a last resort if you cannot log in to configure the settings of the first method.

Extreme method

I have applied this method once, when my laptop crashed severely after updating one of the applications. The laptop hung at the start and did not want to display an authorization window. Hence, I could not login to the system to do a reboot with special parameters.

I needed to do this to restore the system, but if you have the same problem, it will help you enter the BIOS.

I warn you! It is possible to apply this method only as a last resort, when there are no other ways.

This is done like this (I performed these steps on a Samsung product):

  • You connect your laptop to the network
  • Start the system.
  • Disconnect (remove) the battery. the laptop continues to work.
  • Disconnect your laptop from the network.
  • Wait a little while.
  • Connect the battery.
  • Connect to the network.
  • Launch by pressing the power button.
  • After these steps you will find yourself in the system boot menu.

How to enter at BIOS Settings at any Samsung Laptop (2 ways)

Go to BIOS

As you can see, knowing how to enter the BIOS, you can solve many complex problems. Therefore, let’s get down to business as soon as possible, but first make sure that your laptop does not accidentally turn off while working with system settings. This is highly undesirable as it can practically destroy your device;).

But let’s not talk about gloomy, just recharge the battery or connect the power supply (use both energy sources for safety reasons).

Now turn on or restart your desktop computer and immediately start pressing the “magic” key “F2” at intervals a couple of times per second. In most cases, you will see the BIOS in front of you.

How to enter BIOS on Samsung

To get into this mode, when you turn on your laptop or stationary computer, you must immediately hold down the “F2” key for 5-10 seconds. This is a common method, however, on some Samsung notebook models, the start-up process is different. For example:

  • In models of the RV 513 line, the Delete button is pressed together with F2;
  • If you have a 450R5E-X07 ATIV Book series, only the F8 key is required.
  • NP 300V5AH requires the F10 button;
  • To call Bios in a laptop NP900X3E, you need a key combination “FnF12”.

Stage 1: how to enter the boot menu

There are two radically different ways.

The first is with a specially performed laptop reboot. This is the recommended way. The second is useful as a last resort if you cannot log in to configure the settings of the first method.

Correct reboot option

Just slide your mouse vertically along the right edge of the screen until a pop-up menu appears. You can also call it using the keyboard by pressing Win C.

Next, click on “Settings”, then “Change computer settings.” Then press “Update and Restore”.

Far away, the manufacturer dragged this option!

Now we press “Restore” and here it is. the coveted item “Special boot options”. we press on “Restart now”.

Your Samsung (or whatever you have) will dutifully reboot and appear in the boot menu.

Extreme method

I have applied this method once, when my laptop crashed severely after updating one of the applications. The laptop hung at the start and did not want to display an authorization window. Hence, I could not login to the system to do a reboot with special parameters.

I needed to do this to restore the system, but if you have the same problem, it will help you enter the BIOS.

I warn you! It is possible to apply this method only as a last resort, when there are no other ways.

This is done like this (I performed these steps on a Samsung product):

  • You connect your laptop to the network
  • Start the system.
  • Disconnect (remove) the battery. the laptop continues to work.
  • Disconnect your laptop from the network.
  • Wait a little while.
  • Connect the battery.
  • Connect to the network.
  • Launch by pressing the power button.
  • After these steps you will find yourself in the system boot menu.

How to enter BIOS in a Samsung laptop and how to update it

The new generation of UEFI systems that have replaced BIOS has made it difficult to penetrate the holy of holies on laptops. Gone are the days in which every user could easily get there by restarting the computer and pressing the Delete button. Or, if this did not help, press some other keys from the functional group. F6. F8 or others.

This article will discuss how to enter the BIOS on modern PCs or laptops with modern operating systems such as Windows 8 or Windows 10. It looks like you are already desperate, asking yourself the question. is this even possible on your laptop? Maybe you don’t have any BIOS either?

Do not be afraid! Now you can easily and simply follow the necessary steps. We will do this using the example of a Samsung NP350V5C laptop with Windows 8 installed on it.

We will also look at how you can update the BIOS, and at the end of the article there is a video on how to configure it before installing Windows 7 or 8.

Let’s divide the BIOS startup process into 2 stages. So let’s go

Stage 2: starting the BIOS

If you did everything correctly, then you will see the system boot menu, in which you should click on the “Diagnostics” item.

Then click on “Additional parameters”.

And then on “UEFI Firmware Options”

Go to the final launch phase. click “Restart”.

The screen will turn off and after a short (or maybe a long) time you will see the BIOS screen:

BIOS update

It is strongly recommended to update the BIOS only from the official websites of the manufacturers.

In my case, in the browser I need to go to the Samsung website and enter the full model name (written on the bottom of the laptop case): NP350V5C-S1JRU

After pressing the Enter button, a list appears in which we select an item from the “Firmware” category

Next, scroll down the screen and find “Update Software”, click on it, which leads to the download of the BIOSUpdate.exe file

Since I downloaded it from the official Samsung website, I can safely launch it

and update the BIOS of the laptop:

In my case, the latest update has already been installed. If you have a new version available, you just have to press the last button to update the BIOS.

Within the framework of this article, it was described how to enter the “BIOS” on a laptop on models of the most popular manufacturers. There is nothing complicated about it. Even a novice user can easily cope with such a task. The main problem is the lack of unification. Each manufacturer has its own procedure for performing this operation. If you succeed in doing this once, then you need to write down everything in detail and save it. This information may still be useful in the future. Although not so often, but from time to time you have to remember and puzzle over this problem (especially when reinstalling the operating system, you simply cannot do without it). Therefore, this is the best way to do it. The main thing is not to lose it later. It will be enough just to find this entry. and it will be possible to access the “BIOS”.

How to enter BIOS in a Samsung laptop and how to update it

The new generation of UEFI systems that have replaced BIOS has made it difficult to penetrate the holy of holies on laptops. Gone are the days in which every user could easily get there by restarting the computer and pressing the Delete button. Or, if this did not help, press some other keys from the functional group. F6, F8 or others.

This article will discuss how to enter the BIOS on modern PCs or laptops with modern operating systems such as Windows 8 or Windows 10. It looks like you are already desperate, asking yourself the question. is this even possible on your laptop? Maybe you don’t have any BIOS either?

Do not be afraid! Now you can easily and simply follow the necessary steps. We will do this using the example of a Samsung NP350V5C laptop with Windows 8 installed on it.

We will also look at how you can update the BIOS, and at the end of the article there is a video on how to configure it before installing Windows 7 or 8.

Let’s divide the BIOS startup process into 2 stages. So let’s go

To enter the basic structural system, you will need to connect your laptop to a power source. A power failure while working with the “BIOS” can have a bad effect on the computer system.

When restarting the laptop, press the “pause” key or the “Fnpause” combination. The inscription on the monitor should open. “press F2 (f8, f12, f4, etc.) to enter setup”. Which combination (f2, f12, f4, f8) appears in this line, we will click that to enter the “BIOS”. In order to return to “Windows”, click “Enter”.

If you didn’t get any information here, then we go to the Internet and collect data about our mother system. When you do not know the brand of this board, then right-click on the “Start” menu, left-click on “Properties”, a window should be highlighted, in it select “Hardware”.

Then we open the “Device Manager”, we find the system board in the sub-items “Computer Configuration”. We remember its name and enter the request into Google, adding “to enter setup / Bios”. There it will be described with which button to enter the “BIOS”.

READ  How to enter the service menu of a Samsung TV

On some devices, information about the board is located on a sticker with the name of the laptop or near the battery connector. After searching for the desired symbol, restart the laptop and press this symbol even before the pictures appear on the screen. While in BIOS, we use only the keyboard. When choosing an item, click on the arrows or to the right, to the left. To confirm the selected actions, usually press “Plus” or (-) “Minus”.

Entering the BIOS is not difficult, but you need to be careful when making changes to parameters. Otherwise, your laptop may malfunction. If they occur, you need to restore the original values.

Documentation

Examining the documentation is another way to enter the “BIOS”. Windows 7 (and not only) allows you to work with electronic documents. Usually, a CD is included with the mobile PC. In addition to the drivers, it also has an instruction manual. It describes in detail the procedure for operating the device, including the algorithm for entering the basic settings that we are interested in, indicating the keys or their combinations. This information needs to be remembered or better written down for the future. Then we reboot the device and at the start of the download we perform the necessary actions, which were previously described several times.

What is “BIOS”?

Before entering the “BIOS” on a laptop, let’s figure out what it is and why it is needed at all. Literally, this abbreviation translates as “basic input / output system”. Physically, it is a microcircuit with volatile memory that is installed on the motherboard. To ensure its performance, a battery is required. This microcircuit stores information necessary for testing and booting a PC. During normal operation of the laptop, the user does not enter these settings, and there is no point in this. But when reinstalling the operating system or malfunctioning without “BIOS” is difficult to do. One of its main sections is the Boot Priority menu, which sets their priority. Therefore, when performing such an operation, you simply cannot do without entering this section.

How to enter BIOS on a Samsung laptop?

Then you can move on to the main topic of our article. Follow our instructions exactly and entering the “BIOS” will not take much time and effort. Not everyone who has launched “BIOS” knows how and what to do next. We will tell you about all this today.

  • When the laptop is in the process of turning on, press the Pause button for the text to appear.
  • Now find this phrase. “Press F2 to enter setup”. You can replace F2 by pressing the following keys: F1, F8, F10, F11, F12, Escape. Try to select the one you need using the selection method. To exit the mode, press Enter.
  • Now you need to find out the labeling of the motherboard. Select the properties of the computer through “Start”, click “Hardware”, device manager and in the list of configurations (configuration) you will see the mark. Write the title down on paper.
  • Open any browser and enter the name of the board in the request. You can also add in the line “to enter setup / BIOS”.
  • After opening the program, use the arrows to navigate to the menu sections. Use “” and “-” to change the parameters. However, it is possible that other keys are provided for this. This factor is determined by the motherboard model.
  • What changes to make to the settings depends on your goal. It is important to be careful, as the operation of the entire laptop as a whole depends on these data. If after the settings you have made, any problems appear, or information has been lost, restore the original settings. To do this, use the command at the bottom of the BIOS program window.

Note: On some models, the motherboard information is indicated on a special sticker attached to the back of the laptop or to the battery compartment.

How to enter BIOS on Asus

On Asus laptops, the BIOS is entered in the classic way through F2 by pressing it or quickly pressing it. If the input has not been made, then it occurs when you can call the input and output system using the DELF9 combination or alternately pressing these buttons. Often users complain that they still cannot enter the BIOS, then it is necessary to turn off the laptop completely and press the ESC button. When pressed, the BOOT menu appears, in it select the Enter Setup tab, which is activated by pressing Enter. All of you entered the Asus BIOS.

What is BIOS

BIOS is the basic input and output system for information related to system software. It is a set of firmware designed to control the hardware of a laptop, or rather:

  • To check the health of the laptop hardware.
  • Controlling laptop hardware through commands.
  • Participates in loading the operating system.
  • Provides API for working with hardware.
  • Setting the priority of the hard drive (boot).
  • For overclocking the graphics and central processor, RAM.
  • System time setting.
  • Disabling or enabling some equipment, for example, RAM, video card, if several are installed, and you need to understand the cause of the error.
  • Going into the BIOS on a laptop, you can adjust the battery performance.
  • Calibrate the operation of the touch part of the laptop.
  • View all technical data on equipment.

In simple terms, what is BIOS is the software that implements the normal operation of a laptop based on the installed hardware, its main feature is the initial check and launch of the OS. At the same time, the input and output system is stored on a separate BIOS microchip of the same name, which is located next to the motherboard. Depending on the manufacturer of the motherboard, the microchip can be either removable or soldered to the board. Management, after entering the BIOS, is carried out using the keys: DEL, F1, F2, ESC. F9 key. resets all settings to factory defaults, if you are too clever with the parameters. The F10 button works as an automatic saving of the entered data. The input and output system, like other software, may require updating, especially if you have updated the laptop components.

Laptop gaming Acer Nitro 5 AN515-54 (NH.Q5AEU.05J) Shale Black

How to enter BIOS on Samsung

You can enter the BIOS on a Samsung laptop using the F2, F8, F12 or Del buttons already familiar to us. But there are call combinations that are different from other brands of laptops. In this case, the input is performed necessarily through Fn. FnF2, FnF8, FnF12. The buttons must be pressed at the same time.

How to enter BIOS on Windows 10

Not sure how to enter BIOS on Windows 10? This can be done in two ways:

  • Through the keyboard. Reboot or turn on the laptop and before the device boots, press the F2 key at a frequency of 2 times per second. The difficulty of switching on is that even with heavy pressing, you may not be in time before the system boots. Then you have to try again.
  • The second method is based on simultaneously pressing the Shift key and pressing “Restart” from the “Start” menu.

Ways to enter BIOS on Samsung laptop

An ordinary user needs to enter the BIOS only to set up any parameters or more advanced PC settings. Even on two devices from the same manufacturer, the BIOS entry process may be slightly different, as it is influenced by factors such as laptop model, firmware version, motherboard configuration.

Enter BIOS on Samsung

The most common BIOS keys on Samsung laptops are F2, F8, F12, Delete, and the most common combinations are FnF2, CtrlF2, FnF8.

This is the list of the most popular lines and models of Samsung laptops and the keys for entering the BIOS for them:

  • RV513. In the usual configuration, to enter the BIOS when booting the computer, you need to hold down F2. Also, in some modifications of this model, Delete can be used instead of F2;
  • NP300. This is the most common line of laptops from Samsung, which includes several similar models. In most of them, the F2 key is responsible for the BIOS. The only exception is NP300V5AH, since F10 is used for input there;
  • ATIV Book. This series of notebooks includes only 3 models. On ATIV Book 9 Spin and ATIV Book 9 Pro, enter BIOS using F2, and on ATIV Book 4 450R5E-X07 using F8.
  • NP900X3E. This model uses the FnF12 key combination.

If your laptop model or the series it belongs to is not listed, you can find the login information in the user manual that came with the laptop when you purchase. If it is not possible to find the documentation, then its electronic version can be viewed on the official website of the manufacturer. To do this, simply use the search bar. enter the full name of your laptop there and find technical documentation in the results.

You can also use the “typing method”, but usually it takes too long, because when you press the “wrong” key, the computer will continue to boot anyway, and during the OS boot time it is impossible to try all the keys and their combinations.

When loading a laptop, it is recommended to pay attention to the inscriptions that appear on the screen. On certain models, there you can find a message with the following m “Press (key to enter the BIOS) to run setup”. If you see this message, then just press the key that is given there, and you can enter the BIOS.

BICBON.COM 2021