How to factory reset iPhone with buttons

Method two, through iTunes (the device does not turn on)

If the iPhone is no longer able to start on its own, you again need a computer with iTunes and a USB cable. To reset the settings, follow the instructions:

  • Connect iPhone to Computer and Open iTunes.
  • Under Settings [your name] iCloud, turn off Find My iPhone.
  • On the connected device, make a forced restart:
  • IPhone 8 or later: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Then press and hold the power button until the recovery mode screen appears.
  • On iPhone 7 or iPhone 7 Plus: Press the power button and volume down button at the same time. Hold them until the recovery mode screen appears.
  • IPhone 6s and earlier: Press the Home and Power buttons at the same time. Hold them until the recovery mode screen appears. In all three cases, it looks like this:
    factory, reset, iphone, buttons
  • A pop-up window appears in iTunes asking you to restore or update your device. Click “Restore”.
  • In this case, the iPhone settings will also be reset to factory settings, and the current version of the operating system will be “uploaded” to the device.

    How to Factory Reset iPhone: 3 Ways for Different Occasions

    Keep a quick cheat sheet on how to factory reset iPhone. with and without iTunes.

    For a number of reasons, you may need to reset your iPhone to factory settings. In Apple’s terminology, this is called “restoring iPhone”, that is, returning the original settings and setting up the smartphone as new. Read below for three ways to do this.

    Method one, through iTunes (the device turns on)

    If your iPhone is not severely damaged and can turn on, and you have a USB cable and a computer or laptop with iTunes installed, do the following:

    • Launch iTunes on your computer.
    • Under Settings [your name] iCloud, turn off Find My iPhone.
    • Connect iPhone to computer with USB cable. If iTunes requires you to enter a password or make this computer trusted, follow the instructions of the program.
    • When the device is displayed in the program, select it in the panel on the left.
    • In the Overview tab, click the Restore iPhone button.
    • In the pop-up window, click “Restore” again to confirm.

    After that, the device will be cleared of your data and returned to factory settings, and the current version of iOS will be installed.

    Method three, without iTunes (the device turns on)

    You can also do a factory reset on the iPhone itself if you don’t have a computer. But this can only be done if the device turns on.

    To do this, follow these steps:

    • Go to the device menu in the “Settings” “General” “Reset”.
    • Click “Erase Content and Settings”.
    • Enter your device password or Apple ID password to confirm.

    After that, wait for the settings to be erased. The device will be returned to factory condition.

    If your iPhone turns on, we recommend that you back up your data to Apple cloud or external storage before resetting.

    Reset via iTunes

    In order to perform a full reset iPhone through a computer using iTunes, you need to follow the step-by-step instructions.

    iPhone 6S: How to Perform a Hard Reset With Hardware Keys

    • Connect the device using a cable to iTunes.
    • Find the iPhone in the list of identified devices.
    • In the window that appears, click “Restore iPhone”.

    Remember that when restoring a smartphone, the process should not be interrupted in any case, since an incorrect completion will lead to the loss of the device’s performance.

    Reset via Hard Reset

    If factory reset on iPhone did not help, then there is another option for deleting user information. Hard Reset. To do this, hold down the “Home” button and the “Power” button, hold for 10 seconds and wait for the “bitten” logo to appear. For models from the eighth generation, a different principle applies:

    • press the volume up button with a quick movement;
    • also press the volume down key;
    • hold down the power button of the device until the Apple logo appears.

    There are no restrictions on the number of hard resets by the manufacturer, so the procedure is performed as needed, including to eliminate errors in software platforms and applications. This method is suitable for restoring a smartphone if after a reset the device freezes on the boot display.

    How to Factory Reset iPhone

    Apple device owners regularly look for information on how to reset iPhone settings. This solution is suitable for cases when the phone fails for no apparent reason or before the sale of the device. In the process, errors of the operating platform are removed, if necessary, user files are deleted. There will be nothing complicated in the process, it is important for owners to know how to reset iPhone to factory settings.

    Find iPhone

    This feature determines the location of the device. a useful thing if the owner is worried about the safety of the phone. If you plan to sell your device, then resetting your iPhone to factory settings is not enough; you need to remove the device from the Find iPhone app. To do this, open the settings menu and go to the iCloud tab. Scroll to the item “Find iPhone”, you need to switch the switch to inactive state. Confirm with your Apple ID password. After that, wait for an e-mail with a confirmation of disabling the function.

    Smartphone Recovery (Recovery Mode)

    Sometimes factory reset on iPhone causes errors that the smartphone cannot cope with without the help of the owner. For such cases, the device has a built-in recovery mode, to put the phone into Recovery Mode, follow the step-by-step instructions.

    • Disconnect iPhone after charging it 30-50 percent.
    • Press the Home key.
    • Connect your smartphone to your personal computer using a special cable. The Home key must remain in the clamped position.
    • Wait for the iTunes icon and the drawn cable to appear.
    • Launch iTunes on PC and find the connected device.
    • In the window that opens, click the “Restore iPhone” button.
    • Wait for the process to complete.

    Do not disconnect the smartphone from the computer during recovery, otherwise only the masters in the service center will be able to “revive” the smartphone.

    Precautions

    Now, let’s walk you through how to completely reset iPhone and settings. At the beginning of the process, make sure that the smartphone is charged more than 30 percent so that during the reset the device does not run out of power and cause additional problems. Check if the device is jailbroken. after a reset, the smartphone may freeze on the start screen. The main thing is to save user files in the cloud, write down names and passwords, copy contacts from the phone book. Also, through iTunes, you should create a backup copy of settings and applications, so that you can quickly restore deleted information later.

    To do this, run the program on your computer, go to the “File” section, open the “Devices” tab and click “Create a backup copy”.

    Reset via settings

    Now let’s talk about how to reset iPhone to factory phone state. To get started, go to the phone settings program, and then scroll down to the General tab. At the end of the list is the “Reset” item. There, the owner will have to choose whether he wants to permanently erase the information from the smartphone, or just reset the settings. Click on the selected method, and then the “operating system” will offer to copy the application files to the cloud. If the information is important, then click on “Erase after unloading”, if not, then select the “Erase” item. Then we enter the Apple account password and wait for the device to reboot.

    iPhone 6s and earlier (including iPhone SE)

    Let’s start with older devices. This includes all generations of iPhone up to and including 6s and 6s Plus. On these versions of the device, Home (located under the screen) is a physical key, so it is used in the Hard Reset procedure. Press the Power and Home buttons at the same time for 15 seconds until the Apple logo appears.

    What will be removed?

    Before you reset the device, read the list of materials and sections that will be deleted. The complete list is presented below:

    • contacts, calendar, notes;
    • installed applications;
    • music, videos, podcasts;
    • network settings, geolocation.

    It is recommended that you back up to your computer hard drive or iCloud before resetting. This way you will spend the least amount of time restoring all your personal data and settings. After that, you can proceed to the zeroing procedure.

    Depending on the iPhone model, you need to choose the appropriate factory reset method. We have identified 3 relevant options for different versions of the phone.

    How to Factory Reset iPhone Using Buttons

    If your mobile device from Apple constantly freezes or restarts, then a complete reset of the device can solve many software problems. In this article, we will talk about how to reset iPhone to factory settings using the buttons.

    You can reset iPhone via Recovery Mode using computer and iTunes. We will also consider the option without the use of additional tools. only the physical keys of the phone.

    READ  How to share a password on an iPhone

    iPhone 7 and 7 Plus

    In the seventh version of the iPhone, the physical Home button became touch-sensitive, so they decided to change the emergency reset combination. If the phone freezes, the touch button stops responding to pressing. To reset, you need to hold down the volume down key and the power button at the same time.

    iPhone 8 and all new models

    Starting with the iPhone 8, the creators of the mobile device have changed the emergency reset procedure. Now 3 physical keys are involved in this process. First you need to press the volume up button. Immediately after that, press the volume down key once. Then hold down the on / off button for a few seconds until the company logo appears.

    Reset in recovery mode

    A full reset via Recovery Mode uses both the phone buttons and the computer with iTunes. To perform zeroing using a PC, follow the presented algorithm:

    • Connect iPhone to computer via USB cable.
    • Launch iTunes and wait for syncing with your phone.
    • Reset using the buttons as described in our instructions above.
    • After that, iTunes on the computer will prompt you to restore or update the device. Click on the “Restore iPhone” button.
    • Now it remains to wait for the phone to return to factory settings.

    After completing the procedure, you will receive iOS in its original form. At startup, you need to select a language, region, authorize or register an Apple ID, and so on.

    An alternative reset method is the iOS system menu. However, to use it, your device must start properly and not freeze for 10-15 minutes. Then you will have time to go into the settings and select the appropriate zeroing option. The advantage of this method is that the user himself chooses the reset area (full reset, reset content, network settings, geo settings, dictionary, etc.).

    Now you can reset any iPhone model to factory settings using the buttons and the computer. Remember the procedure or add our instructions to your browser bookmarks. this way you will definitely not find yourself in an unpleasant situation with a frozen iPhone.

    We are waiting for your Комментарии и мнения владельцев and questions under the guidance. Portal specialists read all messages and respond to each visitor!

    Cleaning from the device

    The easiest way to clear the settings is on the iPhone. Pre-charge the device to at least 30%, do not erase content from your jailbroken smartphone this way. you will get a non-working device. Do not forget to create a backup in iTunes before doing a hard reset. this will help you quickly return all personal data to the device, except for installed applications and music.

    In the menu, open the sub-item “Basic-Reset”.

    You will see several options for the procedure:

    • Reset all settings. all system parameters will be returned to factory defaults, including set alarms and application settings, user content remains. Helps with downed OS parameters.
    • Content and Settings. System settings and all user’s multimedia data are deleted. The device turns out “out of the box”, the method is suitable for pre-sale preparation of the device. just check that the Apple ID profile is logged out.
    • Network. the parameters of connection to cellular networks, Wi-Fi, VPN, their logins and passwords are cleared. Helps with problems with signal reception and data transmission.
    • Keyboard dictionary. clears words entered by the user from the autocorrection list.
    • Home screen. returns the original view of the desktop by arranging the icons of branded applications in their places.
    • Geolocation. removes all software permissions and prohibitions on the use of geolocation information.

    How to Factory Reset iPhone

    Sometimes it is useful to clean up the inside of your smartphone. especially if it does not work properly at times, you want to sell the gadget, or you recently bought it from your hands. For such cases, Apple has provided several types of cleaning. Let’s figure out how to reset iPhone to factory settings depending on the situation.

    ICloud cleaning

    You can reset iPhone via cloud storage, without using a PC. This method is also useful if you need to restore the device after resetting all settings, but there is no backup copy on your computer. Copies to iCloud are created automatically and regularly during the charging of the gadget, if it is connected to Wi-Fi at that time, and you have not turned off the copy function.

    To reset the settings via iCloud in the device menu, first perform “Erase Content” in the “Reset” subsection, then select “Restore from iCloud Copy”.

    Cleaning through iTunes

    There are two types of factory reset via iTunes for iPhone. updating with a clean firmware or downloading a previously saved copy. Any of them requires sufficient charging of the gadget. at least 70%. The first option will help to erase content and settings, you will get a clean device with fresh firmware. The method helps well with major system crashes, freezes and reboots. How to reset iPhone to factory settings via iTunes:

    • Launch iTunes on your computer, connect the gadget with a cable.
    • On the top bar, select the connected device.
    • Open the “Overview” tab, on the right next to the iOS version, click on “Restore”.

    The program will download the latest OS version to iPhone or iPad, restore factory settings.

    If you don’t want to lose all of your personal content, update your iPhone 5, 6, or other model with a pre-made backup. The device will remain in working order, it will be possible to throw off only the changes that were made after the moment of backup. How to restore a gadget from a copy:

    • In the iTunes menu, open the “File” menu, subsection “Devices” and select the function “Recover from a copy”.
    • Specify the save that you want to use for recovery.

    We recommend that you regularly create working copies of the device, then in case of problems, we can easily reset the latest changes and return a copy to the gadget, where all contacts, photos, notes, messages and iPhone settings are stored.

    Full hard reset

    Hard reset iPhone is not an easy procedure that completely returns the factory settings to the gadget. It will help in cases where you have forgotten your digital password or pattern, you cannot turn off Find My iPhone. But you still cannot hack the found smartphone. if its owner has activated the search function on the Apple website, then even after a full flashing you will need a password from his Apple ID.

    Return iPhone to factory settings and unlock the password using Recovery mode:

    • Turn off the device. hold the power key until the shutdown slider appears.
    • Press and hold the “Home” button, at this time connect the device with a cable to the PC.
    • The iTunes icon will appear on the display. you have entered Recovery. Release “Home”.
    • Open iTunes and Run iPhone Reset via Recovery Procedure.

    When finished, disconnect the wire and restart the gadget.

    In case of serious problems with the system, another bootloader mode. DFU will help. In it, a complete reinstallation of the system occurs. There are several options on how to reset and how to reset iPhone to factory settings in DFU mode:

    • Press the shutdown and Home buttons at once, hold them for 10 seconds, press the shutdown button, and hold the Home button until the power-on sound appears.
    • Hold the shutdown button for 3 seconds. Without releasing it, press “Home” for 10 seconds, then release the power.
    • For iPhone 7 and 7: actions as in option 2, only instead of “Home”. the volume down key.

    When you enter DFU mode, the device screen will remain blank, as in a disabled state. Launch iTunes and perform a deep restore, all system parameters will be reset. The process will take about 10 minutes, then you can reactivate the device or upload a backup.

    We figured out how to remove all user settings and clean up the system. Resetting an iPhone 5s or other model, iPad is easy, the main thing is to carefully follow the instructions. Do not forget to create backup copies of your smartphone, then in case of any malfunctions you will lose a minimum of important information.

    Why do a factory reset on iPhone

    Hard reset often helps with the following problems:

    How to Reset iPhone 4, 5, 6, 7

    If you have problems with your iPhone, then before contacting the service center, you should try to reset the settings yourself.

    Reset iPhone 7

    To reset the seventh iPhone, you need to simultaneously hold down the Power and Volume Down buttons. Keep holding them until the iPhone reboots and shows the bull’s-eye on the screen. When the Apple logo appears, release both keys.

    After that, you should see the initial settings screen. Now you need to set up your iPhone from scratch, as you did after purchase: unlock the device, select a language, country, WI-FI network, etc.

    18 responses to “How to reset iPhone 4, 5, 6, 7”

    Thank you very much, I wanted to carry it to the repair, but thanks to this article, everything returned to its place right at home. Thank you very much PS: on 5s everything happens much faster, about 5-7 seconds

    READ  Forgot iPhone se password what to do

    I am blocked what to do no access to mail

    Hello dear people! I have an iPhone 4s and jailbreak it (on ios6.1.3). Then I installed “Fake iOS 4.1.2” Tweak in the jail and the phone does not work. It turns on, the broken apple lights up (ios6 logo), so for 15 seconds and a recovery bar appears. As it reaches about 79%, it goes out, the logo is barely visible, and later the screen goes out even more. And all the mess in a new way. No laptop / PC. Cho to do?

    thank you i’m sooooo thankful thank you

    iOS 11/12/13- How to Hard Reset Your iDevice (iPhone 7/iPhone 8/iPhone X/iPhone Xr/iPhone Xs)

    Please tell me if I forgot the password on the iPad from iCloud with a hard reset, what will happen ?! will require the same password

    I myself am not very good at recovering and forgotten passwords yet. But Apple’s website has a procedure for recovering Apple ID using a device. Try it: https://iforgot.Apple.com/ru/password/verify/appleid#!section=password However, I don’t know if your iPad has a SIM card. There the number asks for.

    Hi I have an iPhone 4c Writes iPhone Disconnected repeat after 25 557 324 min What to do?

    I have a locked iPhone 5s, how do I reset it to factory settings? Answer please

    How exactly is it blocked? if blocked via iCloud, then either remember the password, or (if you don’t remember or the iCloud account is not yours) send an unlock request to Apple and attach a purchase receipt. Here we wrote about it: How to unlink iPhone from iCloud Last paragraph

    How to reset it to the standard settings if I do not remember the restrictions password?

    Hello. Need help. I entered the wrong password more than once. Now the phone is turned off and writes to connect to iTunes, but this is not possible. Clamping the buttons home and turning on did not give any results. Help me please. It is desirable that all files remain on the phone.

    After I clicked to update the iPhone 5s To 12 iOS, I first began to hang, then lag altogether. I rebooted and the screen just stopped responding buttons. work but the touch pad simply does not respond. can’t unblock. connected to iTunes. asks to unlock to continue. help, maybe there are a couple of tips. I tried to reboot through the clamping home and the power button.

    iPhone X,Xs,11. How to Hard Reset, Factory Reset (Forgot Password)

    When you reset the settings, are the pictures deleted?

    Hello, I forgot the unlock password. Blocked it. There is no computer at the moment. How can I reset the settings?

    Typical factory reset problems

    There are some reasons you can run into. When a person does not succeed in something, he immediately begins to panic, so read the possible reasons.

    • Insufficient memory while performing update. It is very easy to avoid it: you will need to delete music, games, applications that you do not need.
    • Outdated version of iTunes. As mentioned earlier, you need the latest version of the program before resetting the settings, otherwise there may be problems with the procedure.
    • Problems with USB cables. To do this, leave only the USB plugs from the keyboard, mouse in the computer. The problem must be resolved.
    • Some kind of breakdown in the phone’s microcircuit that needs to be replaced only at the repair center.

    Reset settings on iPhone and can’t activate

    Many users face this problem, but it is also a fairly simple operation. Use a few tips.

    • Turn on the new WiFi network. Sometimes, but very rarely, this is the problem.
    • Click the “Home” button, then click “Start over”, try several times (from 5 to 10), since the servers are loaded.
    • Replace the SIM card with a working one, then press the “Home” button again and try the activation process from the very beginning.
    • Connect iPhone to PC, then hold down the Home button. In the iTunes application, click “Restore iPhone” as described in the above paragraphs.

    Easiest Way to Reset iPhone Settings

    You can do this all through the settings of the phone itself. If you have an iPad or iPod, you can do it the same way. But keep in mind that your iPhone must be officially jailbroken. If you have a locked model, then do not reset in any case! You can easily check the phone status by the operator’s IMEI code. You can find it:

    • At the bottom of the phone cover where the manufacturer of the phone is written.
    • In phone. To do this, go to “Settings”, go to “General”, then “About device” and go to the tab “IMEI”.
    • On the phone box.

    Then you need to go to the IMEI.info website and enter the code there. Next, you will be told whether the phone is “clean” or not. Clean means that the smartphone has not been stolen or blocked. This is what “unlocked” means. So, here’s how to reset iPhone:

    • Make sure the battery charge is above 80% before starting.
    • Find the “Settings” section and go to it.
    • Then open the “Basic” tab and scroll to the very bottom.
    • There you will find the “Reset” column. By clicking on it, you will be offered a list of what you can reset (Network settings, keyboard, settings “Home”, warnings of the location “All settings”, “Erase content and settings.” Select “Erase content and settings”.

    You will see a window where you will have to confirm the operation. Please note that media files, music, games, applications will be deleted without a trace, so you need to save them in backup copies. After that, the smartphone will turn off for a few minutes, after which it will work again. During activation, you need a Wi-Fi or computer internet connection in the iTunes application. The iPhone will offer you two options:

    • Set up your phone like new.
    • Set up your phone from backups.

    If you choose the first item, then it will be as after purchasing from a cellular salon. If you choose the second, then your data will remain on it. The choice is at your discretion.

    Resetting the settings to Recovery Mode

    You can try a method where your phone is unresponsive or won’t start at all. To reset the settings, you need:

    • Disconnect iPhone in any available way.
    • Hold down the Home button.
    • Connect via USB cable, while holding the “Home” button.
    • You will have a blue circle labeled iTunes. If you do not have it, repeat the procedure.
    • Launch iTunes and make sure the iPhone is now in recovery mode, then confirm the action.

    You can exit the program as follows:

    • Disconnect from the computer by removing the plug from the connector.
    • Turn off the power of the phone using the “Power” button.
    • Use the same button to turn it on.

    The phone should work like new.

    How to reset iPhone using iCloud?

    Thanks to iCloud, each user can reset all smartphone settings and delete all information from it. To do this, you only need access to the Internet, login and password from your Apple ID account. To reset the settings, you need:

    • Go to the iCloud website.
    • Sign in.
    • Select the device you want to clean (There can be as many as you have for personal use. Choose carefully to avoid deleting the necessary information).
    • Click on the “Erase” tab. After which all the settings of your phone will be reset, respectively, all functions of the phone will be disabled.

    Instructions for resetting iPhone to factory settings

    After reading the instructions on the Internet, you can easily do everything yourself, without using the help of a wizard. Follow these guidelines and you will learn how to factory reset iPhone without harming your smartphone.

    • Go to the “Settings” section on your phone.
    • Find the “Basic” tab, scroll to the bottom.
    • Click on the “Reset” tab once and select “All Settings”.
    • Confirm your action.

    The reset takes about a minute or two. After completing the procedure, you can use your smartphone, your data, music, games, applications will not be deleted. Your Safari bookmarks will not be touched. This procedure can speed up your phone. Find My iPhone and Reset All Settings.

    If your smartphone is at a distance from you, and you need to erase data, then this can be easily done using the “Find iPhone” function. To do this, you need to go to the website www.iCloud.com. Then you choose your phone and enter the login and password from the account. As soon as you have entered the data and confirmed them. click “Erase”. The deletion of all data that is on the phone will start when the phone is online, i.e. connected to the internet. But remember that you can delete data only if you have previously connected this function. After erasing all data, the function will be disabled Reminder: you can restore all your data using a backup that is created in iCloud or iTunes!

    How not to lose important data when performing a factory reset?

    There are two ways to keep your data backed up. It’s using iCloud and iTunes. For the first method, you need a whole Wi-Fi network, and for the second, you need to connect to a computer. Let’s take a closer look at each method. Copy of data to iCloud.

    • Turn on Wi-Fi on your phone.
    • Go to the “Settings” section and click on the “iCloud” tab.
    • Click on “Backup” so that your slider is green.
    • Then click “Create backup” and wait for the download to complete. After that, it will be created in your iCloud (Time and date will be written).
    READ  iPhone and iPhone about what is the difference

    ITunes backup.

    • Connect your phone to your computer.
    • Launch iTunes on your PC, but make sure you have the latest version. If not, then be sure to update!
    • If you are asked for a password, follow the instructions.
    • Click on your device in iTunes when it appears.
    • Click on “Create a copy now”.

    TIP (Mandatory for everyone): remember and write down the password on several pieces of paper, put it in a place where it will not get lost. Otherwise, you simply won’t be able to restore anything. Then look in the program for the latest date and time to make sure that the process was completed successfully.

    How to Factory Reset iPhone Quickly

    How to reset an iPhone to factory settings, when the phone starts loading for a long time, applications stop turning on and malfunctioning, and you just need to do a factory reset. You can reset them in different ways, but this procedure is not always necessary. Before selling a smartphone, you also need to do all these steps so that your information does not fall into the hands of another user.

    Make BackUp

    Before resetting system settings, you need to back up your personal data using the following methods:

    To start

    Before starting the reset procedure, you need to prepare your smartphone:

    • Fully charge the battery. If this is not possible, the battery charge must be at least 30%. Disconnecting the device during the reset or reboot procedure will most likely lead to a software failure, which creates the likelihood of getting a “brick” at the exit.
    • Roll back jailbreak iOS. Zero configuration with jailbreak results in complete blocking.
    • Go through the check sheet located just below.

    iTunes

    You can clean the iPhone through iTunes, here’s how to do it correctly:

    • First, you need to connect your smartphone to your computer using a USB cable;
    • Now you need to turn on and unlock your smartphone to determine the iOS version by the system;
    • After recognizing the device, the program will require disabling the Find iPhone function;
    • By default, the program will offer to restore data from a previously saved copy. refuse, because you need a complete cleaning of the iPhone.
    • Start the procedure by clicking the “Restore iPhone” button.

    How to understand if you managed to enable DFU mode

    Throughout the procedure, the screen of the device should remain black, this is the only sign of successful activation of the mode. When the startup sounds and the welcome window appear, you must repeat the process.

    After all the manipulations, you must confirm the notification “iTunes has found an iPhone in recovery mode” and click “Restore iPhone”.

    Standard tools

    The easiest way to reset the settings to factory settings is using the device menu.

    Select the item “Basic” and go to “Reset”. In the menu that opens, 6 sub-items will be displayed, of which only two are needed for the procedure:

    • “Reset all settings”. this item returns the smartphone to the initial settings, saving all personal information. This method is suitable if you have problems with the software or to clean your smartphone from system junk;
    • “Erase content and settings”. activating this command launches a full formatting of the internal memory: deleting accounts, phonebook, confirmed wireless connections, photo and video recordings, music and other personal information, the settings will also be reset. This method is designed to transfer the device to third parties, for example, when selling.

    If you encounter problems with the software, the device freezes and refuses to turn on, you can resort to Hard reset (hard reset). The procedure can disrupt the operation of the software, adding new problems to the existing ones. Therefore, you need to use a hard reset only when absolutely necessary:

    • Lineup from iPhone 4 to SE. by simultaneously pressing the combination of the Home key and the power button;
    • When carrying out the procedure on 7 models and later, where there is no physical button (XR, XS and XS Max). hold down the power key and decrease the volume at the same time.

    How to Hard Reset iPhone via iCloud

    Open your browser and go to iCloud.com.

    Sign in to iCloud using the same Apple ID and password as your device.

    After that download and run the Find My iPhone app, click All Devices in the map interface.

    In the dropdown list, find the phone you want to reset among all your devices.

    Most important step, click “Erase iPhone” and all data will be deleted.

    What will be removed?

    Before you reset the device, read the list of materials and sections that will be deleted. The complete list is presented below:

    • contacts, calendar, notes;
    • installed applications;
    • music, videos, podcasts;
    • network settings, geolocation.

    It is recommended that you back up to your computer hard drive or iCloud before resetting. This way you will spend the least amount of time restoring all your personal data and settings. After that, you can proceed to the zeroing procedure.

    Depending on the iPhone model, you need to choose the appropriate factory reset method. We have identified 3 relevant options for different versions of the phone.

    Reset in recovery mode

    A full reset via Recovery Mode uses both the phone buttons and the computer with iTunes. To perform zeroing using a PC, follow the presented algorithm:

    • Connect iPhone to computer via USB cable.
    • Launch iTunes and wait for syncing with your phone.
    • Reset using the buttons as described in our instructions above.
    • After that, iTunes on the computer will prompt you to restore or update the device. Click on the “Restore iPhone” button.
    • Now it remains to wait for the phone to return to factory settings.

    After completing the procedure, you will receive iOS in its original form. At startup, you need to select a language, region, authorize or register an Apple ID, and so on.

    An alternative reset method is the iOS system menu. However, to use it, your device must start properly and not freeze for 10-15 minutes. Then you will have time to go into the settings and select the appropriate zeroing option. The advantage of this method is that the user himself chooses the reset area (full reset, reset content, network settings, geo settings, dictionary, etc.).

    iPhone 8 and all new models

    Starting with the iPhone 8, the creators of the mobile device have changed the emergency reset procedure. Now 3 physical keys are involved in this process. First you need to press the volume up button. Immediately after that, press the volume down key once. Then hold down the on / off button for a few seconds until the company logo appears.

    iPhone 7 and 7 Plus

    In the seventh version of the iPhone, the physical Home button became touch-sensitive, so they decided to change the emergency reset combination. If the phone freezes, the touch button stops responding to pressing. To reset, you need to hold down the volume down key and the power button at the same time.

    It might be interesting:

    Please share the article if you liked it:

    If your mobile device from Apple constantly freezes or restarts, then a complete reset of the device can solve many software problems. In this article, we will talk about how to reset iPhone to factory settings using the buttons.

    You can reset iPhone via Recovery Mode using computer and iTunes. We will also consider the option without the use of additional tools. only the physical keys of the phone.

    Now you can reset any iPhone model to factory settings using the buttons and the computer. Remember the procedure or add our instructions to your browser bookmarks. this way you will definitely not find yourself in an unpleasant situation with a frozen iPhone.

    We are waiting for your Комментарии и мнения владельцев and questions under the guidance. Portal specialists read all messages and respond to each visitor!

    Hard resetting your iPhone or iPad is a good idea when it comes to selling your device or handing it in for repair. Restoring to factory settings can also fix some problems with the device, so it’s worth knowing how.

    But before resetting, it’s worth making a backup of your device. You can do this in iCloud, but we advise you to connect your iPhone to your computer and back it up via iTunes instead, just to make sure your data doesn’t go anywhere.

    Now that your iPhone or iPad has been backed up, it’s time to factory reset your device. This can be done in several ways, which we will consider in detail below.

    BICBON.COM 2021