How to find Windows on a Lenovo laptop

find, windows, lenovo, laptop

Method 1

To call the BIOS, for almost all models of Lenovo laptops, immediately after turning on the power, hold down the F2 (or FnF2) key.

How to enter BIOS (BIOS) on a Lenovo laptop or computer

BIOS is a system that, at the initial stage, helps the operating system understand how to boot it and what functions to activate at the same time. There are several ways to enter BIOS SETUP on Lenovo laptops (IdeaPad, ThinkPad and IdeaCentre, ThinkCentre), let’s analyze the main ones.

Incorrect settings in the BIOS can disrupt the operation of your device, therefore, you need to be careful and understand your actions while making any changes.

Method 2

Most Lenovo laptops have a NOVO button. this is a small button, or a hole next to which there is a curved arrow icon.In general, this button is installed next to the power button or on the right / left side of the device.

To enter the BIOS, you must turn off the laptop and hold down the NOVO button for a few seconds. After that, a menu will appear on the screen, in which, using the up / down arrows on the keyboard, select the BIOS SETUP item and press the ENTER key.

Method 3

This method is suitable for Windows 8 / 8.1 / 10 versions.

Before proceeding to the first step of this method, try holding the Shift key and restarting your device through the Start menu. If in this way you got to the Select actions menu, then immediately go to step 4 of this method.

  • Press the Windows i key combination to go to the system settings;
  • In this window, select the Update and Security section;
  • Next, go to the System Restore tab and in the Special Boot Options item click the Restart Now button, after which you will be taken to the Select Actions menu;
  • Select Troubleshoot.
  • Next, select the item Additional parameters
  • UEFI firmware options;
  • And already in the last menu, select the restart button. After that, your device will automatically go to BIOS settings.

ATTENTION! If none of these methods work, then, after disconnecting the laptop from the network and disconnecting the battery, open its case (bottom cover) and remove the flat battery from the motherboard for 10-15 minutes. This will reset the BIOS settings. Then return everything back and, when turned on, try the first 2 methods again.

CPU information in Device Manager (Windows 10)

Another utility that allows you to quickly find out all the basic characteristics of the installed CPU is the Windows Device Manager.

The number of processor cores in Windows 10 can be obtained in the following way:

  • Find the shortcut “This PC” on the desktop or enter the name in the Search line;
  • Right-click on the shortcut and select “Properties”;
  • You can also open the Device Manager utility window by going to the Run dialog and entering the command “devmgmt.msc”;
  • The System window appears. On the left side of the screen, select “Device Manager”;
  • In the menu, you can see data about all components of the computer. Find the “Processors” item and open it. Menu bars appear, the number of which is equal to the number of cores on the PC. You can immediately read the name of each of them, the manufacturer and the frequency.

The “plus” of this method is that you can see detailed data about each physical core of the device in real time. Disadvantage. using this option, you cannot find out the number of processor threads.

Receiving data through the console

If you prefer to work with your computer’s command line interface (or PowerShell console), you can get the information you need about the processor with just one command. over, it is not necessary to enter it on behalf of the administrator.

  • Open the command line through the “Run” dialog by pressing on the Win R keyboard.
  • In the window that appears, enter the command “cmd”.
  • In the console enter “WMIC CPU Get DeviceID, NumberOfCores, NumberOfLogicalProcessors”.
  • After a second of delay, a list of PC processors is displayed, and for each of them. number of cores and logical processors.

Official website of the manufacturer

Once you know the manufacturer of your PC or laptop processor, it is easy to check the details of the model on the main website of the CPU manufacturer.

find, windows, lenovo, laptop

For example, for the manufacturer Intel, the technical properties of the processor can be found out as follows:

  • Go to Intel website.
  • In the search bar, enter part of the processor name and press Enter.
  • Find your processor in the search results.
  • Click on the link to go to the technical specifications.
  • In the Performance section find 2 lines: Number of threads and Number of cores.

If you have a device model from another manufacturer (for example, AMD), just enter its name in any search engine and go on the first request. It will lead to the manufacturer’s official website and contain detailed performance information.

Viewing CPU data via “System Information”

Windows 10 has a built-in application for viewing complex information about the system, here you can also find information about the processor. This can be done in a couple of simple steps:

  • Open the “Run” window by searching or by using a combination of Win R hotkeys;
  • In the window that appears, enter the msinfo32 command;
  • Click on “OK” to open the “System Information” panel;
  • On the right side of the screen, find the line “Processor”. It will indicate the manufacturer of the CPU, the number of physical cores and threads, and the frequency of the processor.

The System Information utility provides extremely reliable information about all components of your computer.

How to find out the number of processor cores: instructions for Windows 10

With the development of computer components, the number of processor cores is steadily increasing. This metric has long been synonymous with hardware performance: more cores mean more tasks that can be processed in parallel. In addition, many resource-intensive programs and games are designed for a large number of logical threads to improve optimization.

You can find out the number of CPU cores in different ways. We will learn about the simplest and fastest of them, which do not require the installation of special programs.

Through the Task Manager

This system utility. it is a treasure trove of data on the condition of the device and its technical characteristics. Calling the Task Manager, you can find out all the necessary information that will allow you to find out how well the CPU copes with tasks.

How to find out how many cores and threads a processor has:

  • Call the Task Manager by pressing the Ctrl Alt Delete hotkeys or by finding the program through Search;
  • Go to the “Performance” tab;
  • The “CPU” section will open immediately. Below the resource usage chart, information about speed, uptime and more will be displayed. Here you can also see a help on the number of threads, which are otherwise called logical processors.
  • The number of streams is displayed in the left column opposite “Streams”.
  • The number of cores is available through the right column in the “Cores” line.

The presented method is good for its speed. you can get all the necessary information about the processor, how many cores and threads it has in a few mouse clicks.

CPU-Z software

Additional software often provides the user with more options than the applications built into the system. Windows 10 has a lot of its own utilities, but you can also learn everything about the processor using third-party tools.

The CPU-Z application offers wide functionality that allows you to find out almost any data about the processor (including the number of processors) in a couple of clicks.

  • You can download the utility at the following link on the official page.
  • After downloading the CPU-Z distribution, run the application;
  • In the CPU tab, at the bottom right, the fields “Cores” and “Threads” will be presented: how many cores and threads are active in the processor, respectively;
  • The same program provides useful information such as data on processor voltage and cache size.

How to find out the model of the motherboard on a laptop in the simplest way

The most primitive, but far from the best method, which many are accustomed to using, is to disassemble the device yourself, and then just look at the product labeling. Yes, it looks simple, but in the process of disassembling a laptop, you need to be extremely careful, because gross intervention can damage some important components of both the “motherboard” itself and the equipment installed on it. Therefore, it is better to use programmatic methods.

Getting information using the DirectX dialog

To call the dialog, use the same Run menu and write the dxdiag command in it, after which a window with several tabs will appear. By default, the General Information tab opens first, which should be used.

There will also be a little information, but among them you can find both the manufacturer and the model of the laptop (it will be indicated in the computer name field).

How to find the motherboard number on a laptop using Intel’s hardware detector

However, the above technique looks somewhat complicated, and not every user will be able to figure it out. Therefore, let’s see how to find out the name of a motherboard on a laptop using a similar software product from Intel. The program in the form of a single executable file SSU.exe must be downloaded from the official website of the company, and then run the portable application and mark the items for scanning the equipment. How to recognize the motherboard on a laptop in this program? Nothing complicated!

Just tick the corresponding item in the (Motherboard) menu located in the center of the window, and then click the Scan button.

At the end of testing, the manufacturer’s name and the serial number of the board will appear in the results window. If desired, at the third step of the check, you can use the redirection to Support to troubleshoot possible problems with the laptop hardware (the redirect will be made directly to the desired section of the official resource, which will open in a new tab in the default browser installed in the system).

Information about the manufacturer and model of the laptop on the command line

For a summary of the manufacturer and model, use the command console tools. And first, let’s see how to find out the manufacturer of the motherboard on a laptop. To do this, in the console, which is completely optional to run with administrator rights (you can call it in Windows 10 through the RMB on the start button or in the Run menu, enter the abbreviation cmd), you need to enter the command wmic baseboard get manufacturer, after which the necessary information will appear.

In the same way, you can easily find out the model of your own laptop by writing the line wmic baseboard get product. Please note that this is indeed very brief information. You won’t be able to find out more information using this technique. However, Windows still has enough native tools.

How to recognize the motherboard on a laptop: all the ways

Very often, many laptop owners are worried about how to recognize the motherboard on a laptop. Such information is often needed when replacing hardware, installing new components, or even when trying to self-flashing the primary BIOS and UEFI input / output systems. Finding a solution is clearly perplexing for some users. Meanwhile, there is nothing particularly complicated here, and completely different methods can be used to obtain such data, including the proprietary tools of operating systems, specialized diagnostic programs and online resources of manufacturers of equipment of this type. Let’s consider some of them.

READ  How to take a screenshot of the screen on a Lenovo laptop

Using system information

System Information is perhaps one of the most interesting tools that are able to display information about all the hardware and software installed in a computer (laptop). How to find the motherboard on a laptop?

To do this, in the program execution console (Win R), you need to enter the abbreviation msinfo32, and then go to the main section and look at the items of the manufacturer and model of the device you are interested in. The disadvantage of this method is that sometimes the manufacturer can be specified, but the name or model number will not be available. How do you know which motherboard is on a laptop in such a situation? To do this, you can use another tool. the information of the DirectX platform dialog.

Using third party software

As you can see, most of the information looks far from complete, but many users also need some additional information. Unfortunately, Windows systems cannot provide it. You can, of course, use the BIOS settings, but this will not give a complete picture either. Thus, speaking about how to find out the motherboard on a laptop, the best solution with obtaining the most detailed information will be the use of third-party diagnostic utilities. For example, programs like AIDA64 and Speecy have proven themselves quite well. But the first application is paid and gives too many parameters that an inexperienced user may simply not understand.

But the second program has a clearly user-friendly interface and basically only provides basic indicators, despite even some advanced data. But getting lost in them is quite difficult. Everything is simple and concise!

How to find out your video card on Windows 10: easy ways

We show you how to find out the model of your graphics adapter. Several easy ways.

Advanced users probably know the name of each component installed in the computer. But if the PC was bought with a ready-made assembly and was used extremely rarely, then over time you begin to forget what kind of filling is inside. In order to find out detailed information about any piece of iron, it is not necessary to go under the cover of the case and look for a barcode with the name. In today’s article, we will tell you how to find out the video card on Windows 10.


This software will open before you all the ins and outs of the installed components. She is a follower of the famous Everest program, which at one time had no analogues.

As for the graphics adapter, you will even find the following things here: the BIOS version of the video card, the number of transistors, the number of pixel pipelines, the bus type, etc. What can we say about the amount of video memory and frequency. This is the most elementary.

Device Manager

The easiest way to look at the information about the computer stuffing allows the device manager. Regardless of whether you have a desktop computer or a laptop? this method will help you.

  • Find the shortcut “My Computer” on the desktop, right-click on it.
  • In the menu that opens, select “Properties”. In the window that appears, you can determine the name of the processor model, the version of the operating system, the amount of RAM, etc.
  • Further, in the left part of the window, find the item “Device Manager” and click on it with the left mouse button. In the device manager, select the item “Video adapters”.

You will see which video card you have (as in the screenshot above). If you write something like “Standard graphics adapter”, it means that you do not have the drivers for the graphics accelerator installed. You can also watch multiple devices instead of just one. This suggests that you have both integrated and discrete graphics cards. Discrete. separate, which is installed in the PCI-express slot on the motherboard. Integrated. graphics core integrated into the CPU.

DirectX Diagnostic Tool

If you do not have the drivers installed and the previous method did not help you, then you can use the services of another built-in utility.

Press the Win key combination (the key with the Windows icon) R on the keyboard. In the window that opens, enter the dxdiag command and press Enter. A diagnostic tool will open, allowing you to find out information about the video card. In the second tab, which can be called either “Display” or “Monitor”, you will see the characteristics of the video card. Memory size, chip type, screen mode, etc.

How to find out the video card model on Windows 10: third-party programs

There are many utilities that tell the user all the information about his system and hardware. Traditionally, programs built into the operating system are inferior in functionality to software from other developers. Therefore, if the previous methods did not help you, do not be discouraged. The utilities described below are better at finding information.

How to view the video card on Windows 10: OS tools

Operating system developers every year expand their functionality and build additional tools into their products. This also applies to the information available to the user about the components. There are several ways to find out the model of the video card on Windows 10.


Quite a simple and compact program from the well-known company Priform, known to us from another popular product. CCleaner.

As you can see, the interface is very simple and provides the user with only the most basic information. As a rule, this is just the name and a couple of characteristics of the component. After installing and running the program, you will immediately see everything that interests you. Interestingly, here you can configure the display of temperatures in the system tray (that is, in the lower right corner on the desktop). If for some reason, the aforementioned giant. AIDA 64 does not suit you, then download Speecy. Here is the link to the official site.

Another very simple utility. Developer. TechPowerUp company. If the above programs show information about almost any component, then GPU-Z specializes only in video cards.

But the depth of analysis here is as high as that of AIDA 64. The software is completely free and compatible with all operating systems. In the very first tab after starting the program, you will find: GPU model, amount of video memory, BIOS version, etc.

There are other ways to look at the video card on a Windows computer, but the ones described above will be enough for absolutely any user. After reading this material, you will probably be able to determine exactly what hardware is inside your laptop or desktop computer.

Documents or sticker on the case

The easiest way to find out the model of your laptop without additional programs is to study the documentation for the device. They indicate the manufacturer, year of manufacture, and the full name of the model. If the documents have not been preserved, you can find the data on a special sticker. For this:

  • We carefully examine the laptop.
  • We find a sticker on the laptop case (one or more).
  • We study the information and find out the model.

As a rule, the manufacturer sticks all the necessary data on the device body, however, the sticker is also often placed on the lid, so we look carefully.

How to find out the exact laptop model in Windows 10

When buying a new laptop, most users carefully study the available models and the features of each version. However, time passes, and this information is missed. as unnecessary. You do not need to remember the name of the laptop model until you have to

  • upgrade the car;
  • install drivers for mat. boards or other links of the PC;
  • resolve any other issues that require the exact specification of the laptop model,
  • buying used equipment directly from the former owner (in this case, you should not believe the seller’s stories).

It is not difficult to find out the model of PC, laptop including. To get basic information, no additional software is needed, the built-in Windows functions are enough. In the instructions, we will consider Windows 10, but the steps are also relevant for older OS assemblies.

Getting PC information via DirectX

DirectX Diagnostic Tool is another component that allows you to find out the laptop model, the version of installed drivers, the model of the graphics subsystem, video adapter, etc.

You can get system information in this way in just a couple of minutes. To do this, follow the instructions:

  • We hold down the WinR keys and call the “Run” window.
  • Enter the command “dxdiag” (without quotes) and press “Enter”.
  • In the window that opens, in the “System” section (the tab is open by default), we find the line with the manufacturer and model of the device.

Command line CMD and Windows console utilities

If you were unable to determine the laptop model through the dxdiag or msinfo32 utilities, use the command line.

With its help, users not only get complete information about the brand of the laptop, but also operate it, as well as configure the necessary settings. There are two basic commands available, each giving complete information about the device. this is Systeminfo and Wmic.

How to use them to display the necessary information about the laptop:

  • Open a command prompt by entering the command “CMD” in the search.
  • The command is executed as Windows Administrator.
  • Type systeminfo and hit Enter.
  • Detailed information about the Windows operating system and about the laptop in general (device model, processor, manufacturer, etc.) will be displayed.
  • Enter the command Wmic csproduct get name
  • The console will display the modification of the laptop without additional manufacturer data.

The first command is more informative, but if the goal is only to find out the official laptop model, you can use both methods.

Through the official website of the laptop manufacturer

For some HP notebook models, none of the following methods can be used to identify the model. If at the same time the documents are lost, you can go to the manufacturer’s official website and use the driver search. In this case, the command “Determine the device model” will be available.

AIDA64 (ex-Everest)

AIDA 64 gives complete information about the PC-machine and its components, including the model name. At the moment, the utility is paid, but there is a free trial period for 30 days. In addition, there is a portable version that does not require installation.

The functions of AIDA64 will not be limited in demo mode, so you can check the details of the laptop through it. How to do it:

  • Download the latest version of AIDA64 from the link.
  • Install the program and run.
  • Go to the Summary information section through the left navigation panel.
  • In the sections “Computer” and “System board” you will find comprehensive information about the laptop model.


The utility is designed to obtain information about the laptop model and the characteristics of its components (RAM, CPU, hard drives, video card, and others). All useful information about the hardware is collected in the “General Information” section (section “Motherboard”, etc.).


Official website: (by the way, there are several versions of the programs to choose from)

READ  How to find out how much memory is on iPhone

One of the best utilities available today! First, it’s free; secondly, it supports a huge amount of equipment (netbooks, laptops, computers of various brands and modifications); thirdly, in Russian.

And lastly, in it you can find out all the basic information about the characteristics of a computer: information about the processor, OS, RAM, sound devices, processor and HDD temperatures, etc.

By the way, there are several versions of the programs on the manufacturer’s website: including the portable one (which does not need to be installed).

Yes, Speccy works in all popular Windows versions: XP, Vista, 7, 8 (32 and 64 bits).


One of the most famous once programs of its kind. True, now its popularity has subsided somewhat, and yet

In this utility, you will not only be able to find out the characteristics of your computer, but also a bunch of necessary and unnecessary information. Particularly pleasing, full support for the Russian language, in many programs you do not see this often. Some of the most useful features of the program (there is no point in listing them all):

1) Ability to view the temperature of the processor. By the way, there was already a separate article about this:

2) Editing auto-loaded programs. Very often, the computer starts to slow down due to the fact that a lot of utilities are written to startup, which most of them simply do not need in everyday work on a PC! There was a separate post about how to speed up Windows.

3) Section with all connected devices. Thanks to it, you can determine the model of the connected device, and then find the driver you need! By the way, the program sometimes even prompts a link where you can download and update the driver. It is very convenient, especially since the drivers are often to blame for the unstable work of the PC.

How to find out the characteristics of your computer in Windows 7, 8

In general, even without the use of specials. utilities a lot of information about the computer can be obtained directly in Windows. Consider several ways below

The method works in both Windows 7 and Windows 8.

1) Open the “Run” tab (in Windows 7 in the “Start” menu) and enter the command “msinfo32” (without quotes), press Enter.

2) Next, run the utility utility, in which you can find out all the main characteristics of the PC: Windows OS version, processor, laptop model (PC), etc.

By the way, you can also run this utility from the Start menu: All Programs. Standard. Service. System Information.

1) Go to the Windows Control Panel and go to the “System and Security” section, then open the “System” tab.

2) A window should open in which you can view basic information about the PC: what OS is installed, what processor, how much RAM, computer name, etc.

To open this tab, you can use another method: just right-click on the “My Computer” icon and select properties from the drop-down menu.

Method number 3. through the device manager

1) Go to: Control Panel / System and Security / Device Manager (see screenshot below).

2) In the device manager, you can see not only all PC components, but also problems with drivers: opposite those devices where everything is not in order, a yellow or red exclamation mark will be lit.

This option is more geared towards the audio and video features of the computer.

1) Open the “Run” tab and enter the command “dxdiag.exe” (in Windows 7 in the Start menu). Then press Enter.

2) In the DirectX Diagnostic Tool window, you can get acquainted with the main parameters of the video card, processor model, paging file amount, Windows OS version, etc.

Utilities for viewing computer specifications

In general, there are a lot of such utilities: both paid and free. In this small review, I have cited the ones with which it is most convenient to work (in my opinion, they are the best in their segment). In my articles, I repeatedly refer to some of (and I will still refer)

How to find out the characteristics of your computer, laptop

Good day.

I think that many, when working at a computer or laptop, faced with a harmless and simple question: “how to find out certain characteristics of a computer”.

And I must tell you that this question arises quite often, usually in the following cases:

  • – when searching and updating drivers (;
  • – if necessary, find out the temperature of the hard disk or processor;
  • – in case of PC crashes and freezes;
  • – if necessary, provide the basic parameters of PC components (when selling, for example, or show to the interlocutor);
  • – when installing a program, etc.

By the way, sometimes it is necessary not only to know the characteristics of the PC, but also to correctly determine the model, version, etc. I am sure that no one keeps such parameters in memory (and the documents for the PC hardly list those parameters that can be found directly in the Windows operating system itself 7, 8 or using special utilities).


A small but very powerful utility. She can give no less information than Everest’a, the only depressing thing is the absence of the Russian language.

By the way, if, for example, you look at the temperature sensors, then in addition to the current indicators, the program will show the maximum allowable for your equipment. If the current degrees are close to the maximum, there is reason to think

The utility works very quickly, information is collected literally on the fly. There is support for different OS: XP, Vista, 7.

It is convenient, by the way, to update drivers, the utility below publishes a link to the manufacturer’s website, saving you time.

By the way, the screenshot on the left shows the summary information about the PC, which is displayed immediately after starting the utility.

PC Wizard

Official website: (link to the program page)

Powerful utility for viewing many parameters and characteristics of a PC. Here you can find both the configuration of programs and information about the hardware, and even test some devices: for example, the processor. By the way, it is worth noting that PC Wizard, if you do not need it, can be quickly minimized in the taskbar, occasionally blinking icons with notifications.

There are also disadvantages It takes a long time to load at the first start (something about a couple of minutes). Plus, sometimes the program slows down, showing the characteristics of the computer with a lag. Honestly, it gets boring to wait for 10-20 seconds after clicking on any item from the statistics section. The rest is a normal utility. If you look at the characteristics rarely enough, then you can safely use!

By the way, some information about the computer can be found in the BIOS: for example, the model of the processor, hard disk, laptop model, etc. parameters.

Acer ASPIRE laptop. Computer BIOS information.

I think it will be very helpful to link to an article on how to enter the BIOS (different manufacturers have different login buttons!):

By the way, what utilities do you use to view PC characteristics??

And that’s all for me today. Good luck to all!

Using the Registry Editor application

If you are a confident user, then you can use the Registry Editor application to find out information about the installed version of Windows. However, it is important to remember that any actions with the registry must be performed carefully and with the utmost care. Any incorrect changes to the registry can cause errors or system failure, which will result in the inability to start individual applications or the crash of the operating system as a whole. Before you start working with the registry, be sure to create a working copy of it. In the ribbon of the main menu of the Registry Editor window, click the File tab and select the Export section. Select a location to store a copy of the registry, title the file and click the “Save” button to complete.

To view information about the Windows operating system, follow these steps:

Press the Windows R key combination together to launch the Run dialog box, then type regedit in the command line box and click OK or the Enter key on your keyboard. In the warning message to the question “Do you want to allow this app to make changes on your device?” click “Yes” to open the “Registry Editor” window.

Now, in the left pane of the window, go to the following address:

HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrenTVersion

Or enter the address in the status bar under the main menu ribbon in the “Registry Editor” application window.

In the right pane of the window, you will find several lines containing useful information about the installed version of Windows. Some of them are as follows:

  • ProductName (shows information about the installed version of “Windows”)
  • EditionID (installed edition of the Windows version)
  • CompositionEditionID (Windows version installed)
  • BuildBranch (Windows 10 variant info)
  • CurrentBuild (build “Windows 10”)
  • CurrentBuildNumber (build number “Windows 10”)
  • ReleaseId (Windows 10 Release Version Information)

Using the “systeminfo” command

You can also get detailed information about the installed operating system “Windows” and the parameters of your personal computer using the command. “systeminfo”.

Open a command prompt as an administrator, or log in with an account with administrator rights and invoke the command prompt. This can be done in different ways, but we will focus on two of them.

Method 1: Press the key combination “Windows R” together and in the “Run” window in the command line enter “cmd”.

Method 2: Right-click on the “Start” button in the “Taskbar” in the lower left corner of the screen, or press the keyboard shortcut “Windows X” together and from the pop-up menu select “Windows PowerShell (administrator)” (in other versions, “Command string (administrator) “).

Now enter the following executable command and press the Enter key on your keyboard to start the collection process:

The system will need to perform a certain set of tests, and after a few seconds, you will receive detailed information about the system and computer parameters.

Scroll up the information a little and in the results obtained, find the name of your operating system, its version, system type, etc.

How to find out which version of Windows is installed on your computer?

Six ways to find out the version, build and bitness of Windows that is installed on your PC. This question is very often asked by many users via e-mail and in the comments, so today we decided to publish a guide on how to find out information about the installed version of the Windows operating system on any computer.

Recently, it is very often possible to purchase a personal computer or laptop with a preinstalled Windows operating system. This is convenient as the system is fully configured and checked for errors. But you can buy a computer without an operating system installed. Then the user has to additionally contact a special service to install the operating system or use the services of his friends and acquaintances. At the same time, the majority of users using the Windows operating system absolutely do not think about its parameters and characteristics. But when it becomes necessary to install additional software or applications, the question arises of the compatibility of such programs and the Windows operating system installed by the user. Then the user has different questions about the characteristics of the operating system installed on his computer or laptop.

READ  How to boot from a USB stick on a lenovo laptop

In this guide, we have tried to answer the following questions about the operating system:

find, windows, lenovo, laptop
  • What version of “Windows” is installed on your computer (“Windows XP”, “Vista”, “Windows 7”, etc.)?
  • Which version of Windows is installed on your computer (home, professional, etc.)?
  • What type of Windows operating system is installed on your computer: 32-bit (x86) or 64-bit (x64)?
  • What service update package is installed on your Windows system (SP1, SP2, SP3, etc.)?
  • What version of Windows 10 assembly is installed on your computer?
  • What version of Windows 10 updates is installed on your computer (update versions 1511, 1607, 1703, etc.)?

How To Upgrade or Install Windows 10 on Lenovo Computer for Free !!

There are many ways to get answers to these questions about the Windows operating system installed on your computer. We will show you different methods suitable for different Windows operating systems, you can try them all and choose the most suitable for you.

Using the “winver” command

This method is very simple and allows you to quickly find out information about the installed version of the operating system “Windows” using a simple command “winver”. This is a universal method and is suitable for any version of Windows.

Press the Windows R key combination together to open the Run dialog box. In the command line box, enter “winver” and click the “OK” button or the “Enter” key on your keyboard to execute the command.

The command will launch the Windows Info dialog box.

The window displays basic information about the installed Windows operating system, shows its version, system build number, service pack, etc. You can also find out which username or which organization it is registered with.

Using the Properties window

All versions of Windows include a standard set of applications by default, in which the System application must be present. It contains a large array of useful and detailed information about the version of the installed operating system “Windows”, and it can always be easily viewed.

You can open the System window in different ways, but we will show only two of them.

Method 1: In the lower left corner of the screen on the “Taskbar” click the “Start” button and open the main menu. Pull the slider of installed programs and applications down to the “System Tools. Windows” section and select the “Control Panel” section.

In the window “All elements of the control panel” select the section “System”.

Method 2: Locate the This PC icon (Computer or My Computer icon for earlier Windows versions) on the desktop of your computer or laptop, right-click on it and select Properties from the pop-up menu.

All basic information is displayed in the “System” window. You will be able to see which version of “Windows” (“XP”, “Vista”, “7”, “8 / 8.1” or “10”) is installed on your computer, as well as determine the edition of the “Windows” operating system (“Home”. “Professional”, “Home Basic”, “Home Premium”, etc.), check if the service pack is installed or not.

In the “System Type” item, you can determine the bitness of the “Windows” operating system (32-bit (x86) or 64-bit (x64)) installed on your computer.

Also, the list of basic computer parameters specified in the “System” window includes information about the processor, installed memory (RAM), computer name, product identifier, etc. Here you can easily find all the necessary information about your operating system “Windows”.

Using the Settings app in Windows 10

If you are using the operating system “Windows 10”, you can find information about the installed version of “Windows”, its edition, update, etc. using the Settings app.

You can open the app in different ways, but we’ll focus on three:

Method 1: In the lower left corner of the screen on the “Taskbar” click the “Start” button and in the menu that opens, click the gear icon.

Method 2: Press the keyboard shortcut together “Windows X” or right-click on the “Start” button, in the pop-up menu, select the “Settings” section.

Method 3: The fastest way, use the “Windows I” keyboard shortcut to open the “Settings” application directly.

Now click on the “System” icon in the “Settings” application, then move the slider down the list of tabs all the way down and select the “About System” tab located in the left pane of the window.

Note: Alternatively, you can directly launch this page using a dedicated command. Press the key combination “Windows R” together, in the Run dialog box in the command line enter “ms-settings: about” and click “OK” to finish.

In the right pane of the Settings window, you will see all the Windows characteristics: Windows 10 release information, version number, operating system build number, product ID, processor, RAM, system type (32-bit or 64-bit ) etc.

Using the WMIC command

You can also use the WMIC (Windows Management Instrumentation Command-line) command in the command line window to get brief information about your system and the installed version of “Windows”.

Open Command Prompt as Administrator in any of the above ways.

Then enter the following executable command and press “Enter” on your keyboard to execute:

All available information will be displayed in the command line window: version of the Windows operating system, build number, update version and much more.

Note: You can also use the “GET” parameter in conjunction with the “WMIC OS” executable command to get a specific parameter information. For instance:

You will see the full name of the operating system “Windows” and its version number, respectively.

We have tried to consider possible methods for obtaining information about the operating system “Windows” and you can use any of them at your discretion.

Laptop case, stickers, battery

There is little hope for packaging from a laptop or some documents. usually all this is thrown away immediately after buying a laptop. But if you still have the instruction manual, you can see the information about the laptop in it.

A more realistic way is to find stickers on the front or bottom of your laptop. They contain complete information about the device, including the manufacturer, series and model. For example, Acer Aspire 5745G.

If the stickers from the case are torn off, then try looking at the model on the laptop battery. Flip it over and find two latches (maybe one). Slide them open and remove the cover to remove the battery. The manufacturer (e.g. HP or DNS) and the series and model will be written on the battery.

Find out the laptop model: ten available ways

To prevent compatibility issues when replacing parts or connecting new equipment, you need to know your laptop model. Below we will consider several proven methods, thanks to which the question of how to find out the laptop model will cease to be difficult for you.

Using software tools

If the information you are interested in is not indicated either on the case or on the battery, then you can resort to software methods to determine the exact model of the laptop. Let’s try to do it through the command line:

  • Click WinR.
  • Enter the request “cmd”.
  • Enter “wmic csproduct get name”.

A model of your laptop will appear in the Windows interpreter window. you just need to rewrite it or remember it. If you are not friendly with the command line, or just want to double-check the information, look at the model of your laptop in the “System Information” window.

  • Click WinR.
  • Enter “msinfo32”.
  • Look at the lines “Manufacturer” and “Model”.

The manufacturer line indicates a specific brand. Sony Vaio, Dell, Lenovo. The model is indicated by numbers and Latin letters. Here you need to be careful: within the series, laptop models may differ in one sign.

Since we went through the system utilities, let’s not pass by the DirectX Diagnostic Tool. Despite the implicit relation to the question of determining the laptop model, here you can also find all the necessary information:

  • Click WinR.
  • Enter “dxdiag”.
  • Look at the lines “Manufacturer” and “Model”.

These are proven options, working on laptops of all manufacturers, whether they are the mainstream Samsung or the rarer MSI. There are other ways: for example, sometimes the information about the laptop is pinned in the “System Properties” section. To open it:

  • Right click on “Computer”.
  • Select “Properties”.
  • Find the line “Model”.

Note: This method does not work on all laptops. For example, Asus with Windows 10 installed in the system properties does not contain such information.

Another option is to look at the laptop information in the BIOS. Reboot the laptop and press Del (maybe another key) until the Basic I / O window appears. There should be an “Info” tab, inside which basic information about the device is indicated.

Computer health monitoring utilities

Notebook Information provides various programs for measuring temperature and other performance indicators of the device. For example, you can use the HWMonitor utility.

  • Download and install the program.
  • Launch HWMonitor.
  • Look at the first line (right after DESKTOP).

The line will contain the manufacturer of the laptop (HP, Lenovo) and its model. You can double-check the data using the AIDA64 program. Although it is a paid utility, it has a trial period (for 30 days), which is enough to determine the laptop model.

  • Run the utility.
  • Expand the “Computer” tab.
  • Open the item “DMI”.
  • Go to the “System” section.

There are a lot of programs that provide detailed information about the computer; you can see the laptop model in any system monitoring utility. By the way, after receiving the necessary information, you should not delete these programs. use them to constantly be aware of the temperature of the processor and video card.

Table of Contents

| Contacts | Content | RSS