How To Make A Presentation In Full Screen

How to launch a presentation in full screen

This can be done in several ways:

  • by pressing the F5 button on your computer keyboard,
  • by clicking the From Beginning button on the Slide Show tab (or Slideshow in recent versions)

If you want to start the show from a specific slide, and not from the first, then select the desired slide in the thumbnail panel and here you can also choose from:

  • by clicking the From Current Slide button on the Slide Show tab, or by pressing ShiftF5 (or Slideshow in recent versions)
  • in the lower right corner of the editor, click the “Slide Show” icon

Bottom edge of the presentation editor screen

Slide Show Operation

No interface or dragee is visible here. The transition to the next slide can be done with control buttons, moreover, in several ways:

How To Make A Presentation In Full Screen
  • press the left mouse button on the keyboard,
  • down arrow right arrow
  • space or Enter

To go back one slide: up or left arrow or Backspace button.
Button “Home” will lead us to the first slide, and “End”. to the last.

Keyboard shortcuts for slide show navigation

  • Changing a slide or switching to a new effect. left-click, spacebar, “N”, “Enter”. Page down, right arrow, down arrow
  • Show previous slide or animation effect. key “P”, “Page Up “or” Backspace “, left arrow, up arrow.
  • Move to specified slide. number, then enter button.
  • Darken and restore. key “B” or “.” (Dot).
  • Highlights and restoration. key “w” or “,” (comma).
  • End of display. “Esc” key

If you move the mouse down to the left corner, a cursor and several buttons appear. The left and right arrows allow you to Flip through the slides again. The next button is in the form of a pencil. Clicking on it will open a small list of additional tools. With their help, you can make notes on the slide during the demonstration.

Running a presentation in full screen

Hello dear blog readers! I have often seen many people demonstrate their presentation in slide editing mode. That is, on the right side of the slides, and on the left side. miniatures. But this is not the right demo, since there is no animation or full screen mode, which is a bit inconvenient for the presenter. And one of the most popular questions for beginners. how to run a powerpoint presentation full screen.

Keyboard shortcuts for handwritten notes

  • CtrlP. replacing the pointer with a pencil
  • Ctrl. arrow pointer replacement
  • Ctrl. replacing the pointer with an eraser
  • CtrlМ. show or hide handwritten annotations
  • F. clear screen

PowerPoint Presenter View

Above was considered an example of showing a presentation on one monitor or on two in duplicate mode. If you are showing a presentation through a projector, then it is more expedient in this case to use the presenter mode.

Monitor screen in presenter mode

Here, the slide show is displayed on the projector, and on your monitor you also get the opportunity to see thumbnails of all your slides, notes to the slide show, the current time and timer of your presentation.

You will not have to remember what should appear on the next screen, and you will be able to clearly control the schedule of your speech.

To enable this mode when you speak, on the Slide Show tab, in the Monitors group, select the checkbox and select the second monitor mode (marked with a red frame below in the picture)

Turn on Presenter View

I hope this last trick will make your public speaking a lot easier. And the audience will be satisfied with your report. I wish you successful performances.

PS: Interesting facts about creating a presentation

Skype screen sharing. How to turn on the sound

In the next window, you need to select whether to broadcast sound from the computer or not (1) and click on the Screen sharing button (2).

In the latest versions of Skype

The screen of our monitor will be broadcast to the interlocutor, i.e. what we are doing on our computer will be shown, and we can explain what is happening with our voice.

At the same time, if the interlocutor wants our desktop to be shown in the full screen of his monitor (for convenience), then he needs to click on the full screen mode button in the Call panel.

Old version of Skype

In recent versions of Skype, full screen mode can be enabled using the button at the top right.

New version of Skype

When broadcasting, we will also have a small menu included with which we can Stop the broadcast. continuing the voice conversation or ending the conversation altogether:

In the old version of Skype In the new version of Skype

And of course, thanks to the broadcast of the monitor screen (Desktop) via Skype, our interlocutor can also show what is on his computer. He may have some kind of problem. Thus, he can clearly show it to us. And we can tell by voice what to do, where to click, go, etc.

Skype presentation. How to show a presentation on Skype

It may also be necessary to show some illustrated presentation in text format, commenting on it in your own voice. Let’s consider how to do this using Skype in the format of office applications, as well as PDF documents.

How to enable screen sharing in Skype

Despite the fact that in Skype, a lot is intuitive, some users wonder: where is the screen sharing in Skype or how to broadcast the screen in Skype??

It’s actually quite simple!

If we need to enable screen sharing in Skype with sound, so that our interlocutor can see on his computer what we are doing on his own, and we comment on what we are doing with our voice, in this case, you can do the following.

We call our interlocutor via Skype and after connecting we turn on the screen sharing.

If you have an old version of Skype. then you can either go to the menu in the Calls section and select Screen sharing.

In the old version of Skype

or on the Call panel, click on the (plus) icon and also enable screen sharing.

In the old version of Skype

Then select Show Desktop from the drop-down list. to begin.

Legacy Skype

Show PDF presentation via Skype

If your presentation is in PDF format, I recommend using PDF-XChange Viewer for files of this format.

Open the PDF file with this program and to go to the presentation display, to remove all menus and tools, press the F11 function key on the keyboard (exit from this mode is also done by pressing F11).

The transition to the next slides in turn is carried out by pressing the Space key on the keyboard.

In addition, it is convenient to use additional features:

  • When you move the scroll bar (on the right) while holding it with the left mouse button, slide thumbnails are displayed. This allows you to jump to the desired slide. Found the required slide, release the mouse button and you’re done! And also other possibilities, which are available through the context menu invoked by the right mouse button.
  • You can enable the Navigation Bar. so that it switches to the desired slides using this panel.
  • Enabling the Highlight function allows you to select the text in the slides with the left mouse button. It is convenient if you want to visually “emphasize” some of the main words and expressions by highlighting them:
READ  How To Unlock The Home Screen Layout

Well, how to stop the presentation of the presentation. we have already considered above. Everything is the same here.

Show presentation format of office applications via Skype

For example, we created a presentation in PowerPoint, LibreOffice Draw, OpenOffice Draw, etc. and now we want to show it to our interlocutor.

Let’s consider, for example, how to do this using the free presentation program LibreOffice Draw. You can install this program using a separate article: LibreOffice. a free suite of office applications.

I will skip the process of creating a presentation, since this is a completely separate topic.

So let’s say we have a finished presentation. Before broadcasting it via Skype, we will make some settings for the convenience of its display.

Let’s first go to the menu in the Demonstration section. demo options.

We set it up as shown in the picture (change slides by clicking. Set at your discretion, if you need it).

Now go back to the menu in the Demonstration section and click on Demonstration, as shown in the picture (or on the F5 function button).

We connect via Skype with the interlocutor, but now we select Show window.

Select the presentation window and click Start.

The window that will be shown to the interlocutor is highlighted in red. Those. everything that happens outside of this window, the interlocutor will NOT see. The Navigator is on the left for our convenience. with which we can switch slides.

In the presentation itself, you can draw with the left mouse button. You may also need to erase everything you drew. To do this, you need to right-click and enable the function of erasing what is drawn on the slide in the context menu.

Simple and convenient!

Screen sharing in the new Skype

In new versions of Skype, you need to click on the Screen Sharing button, as shown in the screenshot below.

In the new version of Skype

How to turn on screen sharing in Skype. Show presentation. broadcast screen

Screen sharing on Skype. Can Skype enable screen sharing? How to do it, broadcast it and run it on a computer? Actual topic!

For example, there are situations when you need to remotely show a presentation or jointly discuss a document.

Or it may be necessary to help a second or a friend to deal with some problem on the computer. Those. we can remotely see what is happening on his computer screen. And it can also be vice versa. Those. we can turn on our computer screen for him and show what we are doing on it at the moment.

Such tasks can be solved using professional programs such as TeamViewer. But in this article we will look at how to do this using the Skype program, which is well known to many users.

Skype screen sharing. conclusions

Now you know how to do a Skype screen sharing. Thus, you can use the capabilities of Skype, in addition to other programs. Skype allows you to show your presentation to your interlocutor. And also you can remotely help with some problem using the display of the monitor screen or the desktop of the computer.

How to make a picture full screen in powerpoint?

The purpose of this article is to explain how to make an image fit the entire slide, so that when the slideshow starts, the image is displayed full screen in PowerPoint. For demonstration purposes, we have downloaded one of the free PowerPoint backgrounds available at SlideHunter.com, but you can use just about any image you want. There are many other resources where you can download free images, or you can use your own photos if you want.

Once you have a background image, usually a JPG or PNG image, there are various methods to fit the entire slide. Once projected, it will fit the entire screen in PowerPoint.

The process is very simple, just drag the corners of the image in the corner of the slides (it is recommended to hold down the toggle key so that the image does not lose proportions). If you are using the same format or aspect ratio for slideshow and photo, the image should fit the slide perfectly.

As mentioned earlier, this method is simple, as you only need to resize the image in PowerPoint by dragging the corners of the image.

However, in many cases the aspect ratio used for the photo is different from the slide format. In this case, you need to enlarge the image to go beyond the boundaries of the slides. Again, you can hold down the toggle key to keep the aspect ratio. The following image shows an example of how we made the background image to fit the slide, when the image is a square image and the slide is configured to use a 16×9 aspect ratio First of all, we inserted the background into the slide.

Then we resize the image to go beyond the borders of the slides, as shown below:

A similar example can be shown in the following screenshot, but with a 16 × 9 embed background image of a 4 × 3 presentation fitting.

Why bother having a full screen image in your PowerPoint presentation? Some presenters argue that using large images is a good technique to make effective PowerPoint presentations, as mentioned in this article Large Images in PowerPoint from the CRM Guru blog.

In this article, we can learn how to make the image fit the entire screen. When using the methods described above, it is possible that the forms are in front of other objects already inserted into the slide. In this case, you need to move the objects to the back. Go to the Image Format menu on the ribbon and then click the panel select button to reorder the form, or click the Submit Background Option button with the background image selected.

Hello dear blog readers! I have often seen many people demonstrate their presentation in slide editing mode. That is, on the right side there are slides, and on the left side there are thumbnails. But this is not the right demo, since there is no animation or full screen mode, which is a bit inconvenient for the presenter. And one of the most popular questions for newbies is how to launch a powerpoint presentation in full screen.

This can be done in several ways:

  • by pressing the F5 button on your computer keyboard,
  • by clicking the From Beginning button on the Slide Show tab (or Slideshow in recent versions)

Slide Show tab in Microsoft PowerPoint

If you want to start the show from a specific slide, and not from the first, then select the desired slide in the thumbnail panel and here you can also choose from:

  • by clicking the From Current Slide button on the Slide Show tab, or by pressing ShiftF5 (or Slideshow in recent versions)
  • in the lower right corner of the editor, click the “Slide Show” icon

Bottom edge of the presentation editor screen

How to crop a picture in PowerPoint?

Select the image and on the opened “Format” panel in the “Size” group, select “Crop”. Please note that there are several image cropping modes:

  • Simple rectangular cropping. you just need to drag the borders of the appeared frame to the desired size and the part of the picture that remains outside the frame will be removed.
  • Proportional cropping. according to the template, crops your picture in the safty aspect ratio.
  • Curly trimming is the most interesting. When choosing any of the proposed figures, your image (or rather, what remains of it) will take the given shape. even stars, even arrows.

PowerPoint Presenter View

Above was considered an example of showing a presentation on one monitor or on two in duplicate mode. If you are showing a presentation through a projector, then it is more expedient in this case to use the presenter mode.

Here, the slide show is displayed on the projector, and on your monitor you also get the opportunity to see thumbnails of all your slides, notes to the slide show, the current time and timer of your presentation.

READ  How to make your laptop screen brighter

Monitor screen in presenter mode

You will not have to remember what should appear on the next screen, and you will be able to clearly control the schedule of your speech.

To enable this mode when you speak, on the Slide Show tab, in the Monitors group, select the checkbox and select the second monitor mode (marked with a red frame below in the picture)

Turn on Presenter View

I hope this last trick will make your public speaking a lot easier. And the audience will be satisfied with your report. I wish you successful performances.

  • How not to make a presentation. common mistakes
  • How to make a presentation with pictures on a computer
  • How to make your own presentation template

Recommended for you:

Slide Show Operation

No interface or dragee is visible here. The transition to the next slide can be done with control buttons, moreover, in several ways:

  • press the left mouse button on the keyboard,
  • down arrow right arrow
  • space or Enter

To go back one slide: up or left arrow or Backspace button.
The Home button will take us to the first slide, and the End button to the last.

Keyboard shortcuts for slide show navigation

  • Changing a slide or switching to a new effect. left-click, spacebar, “N”, “Enter”. Page down, right arrow, down arrow
  • Show previous slide or animation effect. key “P”, “Page Up “or” Backspace “, left arrow, up arrow.
  • Move to specified slide. number, then enter button.
  • Darken and restore. key “B” or “.” (Dot).
  • Highlights and restoration. key “w” or “,” (comma).
  • End of display. “Esc” key

If you move the mouse down to the left corner, a cursor and several buttons appear. The left and right arrows allow you to Flip through the slides again. The next button is in the form of a pencil. Clicking on it will open a small list of additional tools. With their help, you can make notes on the slide during the demonstration.

Keyboard shortcuts for handwritten notes

  • CtrlP. replace the pointer with a pencil
  • Ctrl. replace the pointer with an arrow
  • Ctrl. replace the pointer with an eraser
  • CtrlM. show or hide handwritten notes
  • E. clear the screen

How to take a screenshot in PowerPoint?

Here, in the “Images” group, there is a very convenient tool for creating screenshots. screenshots, it is called “Snapshot”. Open any application, such as MS Word, then switch back to PowerPoint, expand the Snapshot tool and you will see the “photo” of the Word you just opened. Now Click on it and voila. it will appear on your slide.
Screenshot is taken for any other window or application open under the current PowerPoint slideshow.

If you do not need to take a screenshot of the entire screen, but only need some part of it, when you open the “Snapshot” list, select the “Screen Clipping” tool, and then, using the cursor that appears, “circle” the place you are “photographing”.

It can be seen that screenshots of all windows open at this moment are automatically generated in the viewer

To resize an image:

  • Click on the image.
  • Position the mouse cursor over one of the dimension corner handles. The cursor changes to a pair of arrows.
  • Click on the size handle and, do not release the mouse button, drag the cursor until you reach the desired size.
  • Release the mouse button. The image will be resized.

The size manipulators on the sides of the image also resize, but do not maintain the aspect ratio. Use the angular size manipulator to maintain image proportions.

To find a picture:

  • Go to the Insert tab.
  • Click on the Image command in the Images group.
  • Picture command options will open the case in the taskbar.
  • Enter a keyword (it depends on the image you need) in the Search field.
  • Click on the drop-down list of the Search objects field.
  • Unselect the media types you don’t need.
  • If you would like the search for images to be performed on Office.com as well, check the Include content from Office.com site. Otherwise, the search will only be performed on your computer.
  • Click Start.

How to add a picture to PowerPoint?

As always, there are several ways to do this, you can:

  • Just drag the picture from the folder to the sheet of the open presentation.
  • Use the “Insert” panel, and in the “Pictures” group, select “Pictures”.

Inserting screen clipping:

  • Go to the Insert tab.
  • Click the Snapshot command and select Screen Clipping.
  • An image of your current screen is displayed and the mouse cursor changes to a cross.
  • Click and hold down the left mouse button and drag the cursor over the area you want to “capture”.
  • The screen clipping is displayed on the slide.

How to make “Skyrim” in full screen. Understanding the settings

Well, today we will try to figure out the question of how to do “Skyrim” in full screen. This is a fairly easy task that can be accomplished in several ways. None of them will go unnoticed. So let’s get started soon.

Settings

Well, you still think how to do “Skyrim” in full screen? You have probably just started your acquaintance with the game world. After all, any person who has ever played something knows that there is a special menu for the implementation of certain functions. It’s called “customization”. Going on here “fit” games for the user.

In order to answer our today’s question, you will first have to launch the game. In the state and window in which it is displayed at the Present moment. Now, using the mouse or keyboard, go to “Settings”. Find here “screen resolution”. Take a close look at the inscription. There must be a point “in full screen”. Tick ​​it off. Now save your changes. See what happened. The game started in the form in which you wished. However, there are a couple of options that can help you. Let’s get to know them. After all, the already proposed methods do not always work.

Alternative way

So let’s see how to do “Skyrim” full screen if the previous options were useless. Sometimes, for some unknown reason, failures and malfunctions occur, which interfere with the correct operation of hot keys and game settings. But there is a so-called “alternative” a way to change the screen mode. Now we will meet him.

First of all, go to “Start”. Now search for the file “SkyrimPrefs.ini”. This is the cherished place that is responsible for the game settings. We will have to work with him. You need to open it with notepad and find the line bFull Screen there. Is there a 0 after =? Then Change to 1 “percentering” displaying the game. To do this, in the iSize H line, type 1024, and change the W value to 1280. It remains to save the file. You can start the game and enjoy the results achieved. But there was one more option. It is not suitable for everyone. However, let’s break it down.

Hotkeys

So, the first option, which we will consider today. these are the so-called hotkey combinations. With their help, you can easily answer the question on “Skyrim:” How to make a full screen for a game? “. Let’s quickly get to know the combination we need.

So, if you wondered for the first time, you hardly know at all which keyboard buttons you need to press. But avid gamers can easily answer this question. In order to understand how to do “Skyrim” full screen, just press Alt and Enter at the same time. This combination will help you to unfold absolutely any toy. So, nothing remains. will launch the desired program or application, wait until it boots (so that the computer does not “slow down”) and press Alt Enter. So it will unfold “Skyrim” full screen. But there are other options as well. Which ones? Now we will get to know them. After all, one keyboard cannot be limited!

If problems in “Steam

So, now it’s time to talk to you about the case when all the proposed options have already been left behind, and the game has not yet developed. Yes, it’s worth noting that this has to do with users “Steam”. As a rule, they often have problems with “unfolding” games. Let’s try to figure out what’s what.

READ  How To Record Screen On Ipad

If you are wondering how to do “Skyrim” full screen, then first of all try “walk” for all the previous steps. Did not help? Then follows a little “clean up” game folder. To do this go to “My documents”. Now find “Skyrim”. Open it and see what files are stored there. Remove them and restart your computer. Start the game with “Steam”. That’s all. the problem is settled.

Resizing slides

The most important thing to consider when changing the size of the frame is the logical fact that this directly affects the workspace. Roughly speaking, if you make your slides too small, there will be less space left for distributing media and text. And the same is the opposite. if you make the sheets large, then there will be a lot of free space.

In general, there are two main ways to change sizes.

How to make slides full screen in powerpoint?

Hello dear blog readers! I have often seen many people demonstrate their presentation in slide editing mode. That is, on the right side there are slides, and on the left side there are thumbnails. But this is not the right demo, since there is no animation or full screen mode, which is a bit inconvenient for the presenter. And one of the most popular questions for newbies is how to launch a powerpoint presentation in full screen.

This can be done in several ways:

  • by pressing the F5 button on your computer keyboard,
  • by clicking the From Beginning button on the Slide Show tab (or Slideshow in recent versions)

Slide Show tab in Microsoft PowerPoint

If you want to start the show from a specific slide, and not from the first, then select the desired slide in the thumbnail panel and here you can also choose from:

  • by clicking the From Current Slide button on the Slide Show tab, or by pressing ShiftF5 (or Slideshow in recent versions)
  • in the lower right corner of the editor, click the “Slide Show” icon

Bottom edge of the presentation editor screen

Finally, it should be said that when you change the size of the slide without automatically resetting the scale in the elements, a situation may occur when the displacement of the components will be significant. For example, some pictures may even go beyond the boundaries of the screen.

So it’s better to use auto-formatting and save yourself from problems.

We are glad that We were able to help you solve the problem.

Ask your question in the comments, detailing the essence of the problem. Our experts will try to answer as quickly as possible.

Slide Show Operation

No interface or dragee is visible here. The transition to the next slide can be done with control buttons, moreover, in several ways:

  • press the left mouse button on the keyboard,
  • down arrow right arrow
  • space or Enter

To go back one slide: up or left arrow or Backspace button.
The Home button will take us to the first slide, and the End button to the last.

Keyboard shortcuts for slide show navigation

  • Changing a slide or switching to a new effect. left-click, spacebar, “N”, “Enter”. Page down, right arrow, down arrow
  • Show previous slide or animation effect. key “P”, “Page Up “or” Backspace “, left arrow, up arrow.
  • Move to specified slide. number, then enter button.
  • Darken and restore. key “B” or “.” (Dot).
  • Highlights and restoration. key “w” or “,” (comma).
  • End of display. “Esc” key

If you move the mouse down to the left corner, a cursor and several buttons appear. The left and right arrows allow you to Flip through the slides again. The next button is in the form of a pencil. Clicking on it will open a small list of additional tools. With their help, you can make notes on the slide during the demonstration.

Keyboard shortcuts for handwritten notes

  • CtrlP. replace the pointer with a pencil
  • Ctrl. replace the pointer with an arrow
  • Ctrl. replace the pointer with an eraser
  • CtrlM. show or hide handwritten notes
  • E. clear the screen

Standard formats

If you just need to change the current format to portrait or, conversely, to landscape, then this is very easy to do.

  • You need to go to the “Design” tab in the presentation header.
  • Here we need the very last area. “Configure”. Here is the “Slide Size” button.
  • Clicking on it opens a short menu containing two options. “Standard” and “Widescreen”. The first has a ratio of 4: 3, and the second is 16: 9.

Typically, one of them is already installed for the presentation. It remains to choose the second.

  • The system will ask how to apply these settings. The first option allows you to simply resize the slide instead of affecting the content. The second one will adjust all elements so that everything has the appropriate scale.
  • After selection, the change will occur automatically.
  • The setting will be applied to all existing slides; you cannot set a unique size for each individually in PowerPoint.

    PowerPoint Presenter View

    Above was considered an example of showing a presentation on one monitor or on two in duplicate mode. If you are showing a presentation through a projector, then it is more expedient in this case to use the presenter mode.

    Here, the slide show is displayed on the projector, and on your monitor you also get the opportunity to see thumbnails of all your slides, notes to the slide show, the current time and timer of your presentation.

    Monitor screen in presenter mode

    You will not have to remember what should appear on the next screen, and you will be able to clearly control the schedule of your speech.

    To enable this mode when you speak, on the Slide Show tab, in the Monitors group, select the checkbox and select the second monitor mode (marked with a red frame below in the picture)

    Turn on Presenter View

    I hope this last trick will make your public speaking a lot easier. And the audience will be satisfied with your report. I wish you successful performances.

    • How not to make a presentation. common mistakes
    • How to make a presentation with pictures on a computer
    • How to make your own presentation template

    Recommended for you:

    One of the fundamental steps in working with a PowerPoint presentation is setting the frame format. And there are a lot of steps here, one of which can be editing the size of the slides. This issue should be approached carefully so as not to acquire additional problems.

    Fine tuning

    If the standard methods DO NOT suit you, you can fine-tune the page dimensions.

    • In the same place, in the expanded menu under the “Slide size” button, you need to select “Adjust slide size”.
    • A special window will open where you can see various settings.
    • The item “Slide size” contains several more templates for sheet dimensions, they can be selected and applied or edited below.
    • “Width” and “Height” just allow you to set the exact dimensions that are required by the user. Indicators are also transferred here when choosing a template.
    • Case can choose orientation for slides and notes.
  • After clicking OK, the options will be applied to the presentation.
  • Now you can safely work on.

    As you can see, this approach allows you to give slides a much more non-standard shape.

    Did this article help you?

    In the Software section, the question How do I open a full-screen presentation in Microsoft PowerPoint? given by the author Layering the best answer is It seems to press F5

    2 answers

    Hello! Here is a selection of topics with answers to your question: How to open a presentation in full screen in Microsoft PowerPoint?

    Answer from Spikelet
    Depending on the version of the product, you need to find the “Slide Show” button, or its analogs

    Answer from Neurosis
    “Slide Show”. either “From the beginning” or “From the current slide”

    Answer from Elena Glukhotina
    I must press F5

    | Contacts | Content | RSS