How to make split screen on Windows 10
You can also adjust the brightness level of the monitor using the standard OS settings. Here’s what you need to do for this:
- Press the left mouse button on the “Start” button in the lower left corner of the screen.
- In the window that opens, a little above the “Start” button, you will see an image of a gear. Click on it.
Next, go to the “System” tab.
After you set the desired brightness, the window can SIMply be closed.
This method can be used exclusively by owners of mobile devices with Windows 10 installed. It will allow you to separately adjust the brightness of the device when working on AC and on battery.
- Open the “Control Panel”. You can read about all possible ways to do this in our separate article. We use the key combination “WinR”, enter the command “control” and press “Enter”.
Choose from the list the section “Power supply”.
Next, you need to click on the line “Setting the power supply scheme” opposite the scheme that is active for you.
A new window will open. It is in it that you can set the brightness indicator for both modes of operation of the device. You just need to move the slider to the left or right to change the parameter. After making your edits, don’t forget to click the “Save Changes” button. It’s at the bottom of the window.
Change brightness on Windows 10
All users of computers and laptops always customize the operating system based on their own tastes and preferences. But there is a category of people who SIMply do not know how to change this or that parameter. In today’s article, we would like to tell you about several methods that will help you adjust the screen brightness level in Windows 10.
This method is one of the most popular today. The fact is that most modern PC keyboards and absolutely all laptops have a built-in brightness change function. To do this, you need to hold down “Fn” on the keyboard and press the decrease or increase brightness button. Typically, these buttons are located on the Left and Right arrows
or on “F1-F12” (depending on the manufacturer of the device).
If you do not have the ability to change the brightness using the keyboard, then do not be discouraged. There are other methods to do this.
This method is very SIMple, but it has one drawback. The fact is that with it you can only set a fixed brightness value. 25, 50, 75 and 100%. This means that you will not be able to set intermediate indicators.
- In the lower right corner of the screen, click on the “Notification Center” button.
When the desired result is achieved, you can close the “Action Center”.
Windows Mobility Center
This method by default can be used only by owners of laptops with the operating system Windows 10. But there is still a way that will enable this option on a stationary computer. We will talk about this below.
- If you are the owner of a laptop, then press the “WinX” keys on the keyboard at the same time, or press RMB on the “Start” button.
- A context menu will appear, in which you need to click on the line “Mobility Center”.
As a result, a separate window will appear on the screen. In the very first block, you will see the brightness settings with a standard adjustment bar. By moving the slider on it to the left or right, you will decrease or increase the brightness, respectively.
If you want to open this window on a regular PC, you will have to edit the registry a little.
- Press the “WinR” keys on the keyboard at the same time.
- In the window that appears, register the command “regedit” and press “Enter”.
This will open a longer list. In it you need to find the “Microsoft” folder. Click on it with the right mouse button and select the line “Create” in the context menu, and then click on the item “Section”.
The new folder should be named “MobilePC”. Next, you need to create another one in this folder. This time it should be called “MobilityCenter”.
Right click on the MobilityCenter folder. Select the line “Create” from the list, and then select the item “DWORD Parameter”.
The new parameter should be named “RunOnDesktop”. Then you need to open the created file and assign it the value “1”. After that, click the “OK” button in the window.
Now you can close the registry editor. Unfortunately, PC owners will not be able to use the context menu to call the mobility center. Therefore, you need to press the “WinR” key combination on the keyboard. In the window that appears, enter the command “mblctr” and press “Enter”.
If you need to call the mobility center again in the future, you can SIMply repeat the last point.
Brightness change methods
Let us immediately draw your attention to the fact that all the steps described below were tested on Windows 10 Pro. If you have an operating system of a different edition, some items may SIMply not exist for you (for example, Windows 10 Enterprise ltsb). Nevertheless, one of the above methods will definitely help you. So, let’s start describing them.
Change monitor settings on stationary computers
All the methods described above are applicable mainly to laptops. If you want to change the brightness of the image on a desktop PC monitor, the most effective solution in this case would be to adjust the corresponding parameter on the device itself. To do this, you need to follow a few SIMple steps:
- Locate the adjustment buttons on the monitor. Their location depends entirely on the specific model and series. On some monitors, such a control system may be located at the bottom, while on other devices. on the side or even on the back. In general, the buttons mentioned should look something like this:
If in the process of adjusting the brightness you have any difficulties, you can SIMply write the model of your monitor in the comments, and we will give you a more detailed guide.
This is where our article has come to its logical conclusion. We hope that one of the listed methods will allow you to set the desired monitor brightness level. Also, do not forget to periodically clean the operating system from garbage in order to avoid various errors. If you do not know how to do this, then read our tutorial.
Image is stretched on Windows 10. disable automatic driver updates in Windows 10
First of all, you must disable automatic driver updates through Windows 10, because that is the source of the problem in this case.
The system constantly overwrites the manufacturer’s driver with its own from the Windows Update site causing problems.
To do this, open an explorer window. In the side menu on the left, right-click on the This PC tab and select Properties from the drop-down context menu.
A new window will appear named “System”. Again, pay attention to the left side of the window with a list of available tabs. Click here in the Advanced System Settings field. A new window will appear titled “System Properties”. Go to the “Hardware” tab in it.
Click on the Device Installation Settings button. In the new window, you can choose if the system should automatically install manufacturer apps and device icons.
This option also includes device-specific drivers such as ATI Radeon or NVIDIA GeForce graphics cards. Select the “No (device may unexpectedly work)” option here.
If the system asks you to restart your computer, agree to this. The first step is behind. the system will no longer automatically install the new driver, which causes resolution problems.
Now we need to restore the original driver for our video card so that all resolutions are available again.
How to remove a stretched screen on windows 10 in a laptop or computer monitor
If the screen resolution in a laptop or computer on windows 10 is stretched, then the problem is most often in the drivers, although a dozen in this case are much more successful than Windows 7.
The problem may be that many AMD drivers since March 1, 2016 are SIMply not updated, and those that are with the latest revisions of Windows 10 do not work.
What to do with such a flaw in order to fix a stretched screen on windows 10. If the manufacturer or Microsoft do nothing, then users of laptops with such video cards will SIMply have to go back to Windows 7 or Windows 8.
And this despite the fact that they were strongly encouraged to switch to Windows 10 and now they are left on the “ice”.
This prompts many people to return to older systems, in particular, not all equipment of the latest generation is necessary, and they do not like it.
The second problem is monitor resolution, but it is usually solved through settings. Let’s look a little deeper on how to remove a stretched screen on windows 10 in a laptop or computer monitor.
Stretched screen on windows 10. restore the original driver to the video card
First, try to do it as SIMple as possible, that is, using the device manager.
Go to Control Panel in Windows 10 (if you don’t have a pinned tile, you can search for it), then go to the Hardware and Sound tab. Device Manager”.
In the Device Manager window, expand the Graphics Cards tab and find your card in the list. Double click on it with the left mouse button to view the details.
In a new window with detailed information about the video card, go to the “Driver” tab and use the “Restore driver” option.
The system should automatically restore the original driver that was previously working properly, and since we turned off automatic driver update in the first step, we are confident that it will not be overwritten anymore.
Immediately after restoring the driver, the screen will briefly go black and then return with the correct resolution.
Windows 10 and the screen resolution is stretched. how to fix it
Your Windows 10 won’t allow you to set your screen resolution higher than 1024 × 768? Is the image stretched out on a monitor or laptop? No widescreen resolutions to choose from? Don’t worry, it can be fixed.
Windows 10 updates include not only system components and new features, but sometimes drivers such as graphics cards or other devices.
It may happen that the drivers provided by Microsoft will not work as expected, causing our video card to display an image in the wrong resolution.
Installing the latest drivers from the manufacturer’s website doesn’t help as the system constantly overwrites the driver with its own.
Many users who have slightly older laptops and computers have learned about this. As a result of the update, problems appeared. they stopped displaying widescreen resolution.
Only basic screen resolutions are available, such as 640×480, 800×600 and 1024×768. How to fix it?
What to do if driver recovery doesn’t work
If the “Repair Driver” option in the second step does not work, you must first completely uninstall the current drivers and then manually install the original drivers using the official installer from AMD or NVIDIA.
If you have a Radeon graphics card, download the AMD CleanUninstall utility. This is the official tool for removing drivers for Radeon cards. Run this program, click OK to confirm the removal of the drivers and wait a bit.
After a while, a summary window will appear. click “Finish” and confirm to restart your computer. Now you need to install new drivers from the manufacturer’s website.
After installing the drivers, the resolution will be restored to the correct value, compatible with the native supported resolution of the monitor or laptop.
If you have an NVIDIA graphics card, the easiest way to uninstall them is using DDU (Display Driver Uninstaller).
Then download and install the drivers for your graphics card from the NVIDIA website. Once installed, the screen resolution should return to normal. Success.
In the article, we considered the question. how to change the screen resolution in Windows 10. If you still have questions on this topic, you can leave them in the comments a little below, we will help you restore the resolution when it crashed.
Setting Resolution with AMD Catalyst Utility
If you have an AMD graphics card installed, you can change the display settings using the manufacturer’s utility, just like in the previous example.
Right-click on a free area of the screen and find and launch “AMD Catalyst Control Center” in the list.
In the menu list on the left, open “Desktop Management”. “Desktop Properties” (in the Russian version of the drivers it will be Desktop Management. Desktop Properties). In the properties area, set the required screen resolution and click “Apply” or “Apply”.
Select the options you want
Through the settings dialog
The most common method for changing monitor resolution is using the Display Settings interface.
- To do this, call the desktop context menu and go to the “Screen settings” item.
- Then we go to the “Additional parameters” tab, where we will see a drop-down menu with the inscription “Resolution” and the settings supported by your monitor.
- If there is more than one monitor, select the monitor whose resolution will be adjusted, otherwise skip the step.
- In the drop-down menu, select the required, or better, the recommended screen resolution and click “Apply”.
After that, the image on the display will change for a few seconds to evaluate the picture and to restore the previous resolution settings. In case of problems (screen flickering, black background, artifacts), wait 15 seconds, after which Windows 10 will reset the settings to the previous ones.
How to properly change the screen resolution in Windows 10
In this article, we will take a closer look at the question. how to change the screen resolution in Windows 10, we will also pay attention to the problems that may arise in connection with this: the value we need is missing, the image looks small, blurry fonts, etc. For clarity, in at the very bottom of the page there is a video in which the written.
Screen resolution is a combination of two values that identify the width of the image horizontally and vertically in pixels (the points that make up the picture). Higher values make the picture look small.
For modern monitors based on a liquid crystal matrix, you need to specify a resolution that exactly matches the physical value of the screen. In other words, the number of pixels of the picture horizontally and vertically should be equal to the number of matrix points.
Via Control Panel
In a SIMilar way, the display resolution is changed through the Control Panel, and in the old, familiar from Windows XP interface:
- Call the context menu of a free part of the desktop.
- Select the “Screen” option from the drop-down list or go to the Control Panel and find the component of the same name located one of the last.
- After opening the window where the text and interface elements are resized, click on the “Screen resolution setting” link located in the left menu of the dialog.
See also: If after installing Windows 10 does not work
- We select the required screen resolution and, if you use multiple monitors, indicate the settings of which we intend to change.
After clicking on the “Apply” button, as in the first case, we will be able to evaluate the selected settings and in case of dissatisfaction with them, cancel the changes. After clicking on “OK” the parameters will take effect instantly when the window is closed.
In addition to the named classic methods, it is possible to change the screen resolution using specialized software.
How to change the screen resolution in windows 10
After installing or upgrading to windows 10, many have a problem with the screen resolution in a computer or laptop.
Sometimes it cannot be changed, for example, from 1920 x 1080 to 1366 x 768. It’s not tragic. everything can be done.
To change the screen resolution to minimum or maximum you do not need to edit anything in the registry. Everything can be configured “without leaving the checkout”.
It also often happens that the settings are missing. Established small and at least kill.
Some people think that to increase it you need a program, this is wrong. you need a driver.
Below you will find a special guide on how to change the wrong screen resolution for the one you need.
Carrol is a tiny utility designed to help you adjust the screen resolution. SIMple user interface allows you to change monitor parameters in two clicks.
- Run the application on Windows
- Choosing a computer monitor.
- Specify a set of parameters (refresh rate, color depth).
- Click: “Change screen.” to apply the settings without logging out.
- Agree to the changes.
How to change the screen resolution in Windows 10. Troubleshooting | Serious blog about serious
Greetings, friends. It turns out I’m not the only one who has a problem with the screen resolution in Windows 10 immediately after installation or update. If you want to make it 1920 x 1080, and you SIMply cannot do it, that is, it SIMply cannot be done in the settings, then the reason, as usual, is trivial and it will not be difficult to fix it. It’s all about the drivers that need to be installed and now we will do this. we will do about the same when the sound disappeared.
It is useful to know how to change the screen contrast on Windows 10 using the Accessibility feature, which allows you to choose a contrast settings scheme or customize your own, for this you need to:
- open the “Options” menu “Start”;
- go to the section “Special features;
- in the “High Contrast” tab set a suitable theme.
Any contrast theme can be further customized for your convenience
Additional Information! You can flip the image on the monitor screen using the keyboard shortcut CtrlAlt, and rotate it 90 degrees. CtrlAlt →.
SIMilarly, you can change the contrast of the monitor. The image should remain clear with visible black and white areas, but no sharp border between them.
Example of normal screen contrast
Splitting the screen into several parts
The tens workspace can be divided into 2, 3 or more parts, which is convenient when working on several projects and having a large monitor.
The ability to split is activated by default in Windows, to check this, you need to open the “Multitasking” tab in the system settings and make sure that all the sliders in the “Work with multiple windows” menu, as well as the “Pin windows” switch are active.
To dock the window on the left half of the screen use the Win ← hotkeys, and to the right. Win →. The second snapping method is to drag the window to the desired side.
To move between windows, use the arrow buttons, and to enlarge one of them to the full screen, use the “Enter” key.
Additional Information. To divide the work area into three or four parts, use the keyboard shortcuts Win → (or ←) and Win (or)
Through power settings
You can make the Windows 10 screen on laptops or tablets brighter using the power settings, for this:
- right-clicking on the battery level indicator opens its pop-up menu;
- in the lower left corner of the window, they find a button-tile with a sun icon and the current value of brightness in percent;
- by clicking on the tile change the required parameter.
Important! Not all devices support this feature “tens”.
Through system parameters
With the help of the “Notification Center” it is also convenient to change the brightness, for this you need to open its menu by clicking on the icon located in the lower right corner of the monitor and click on the “Expand” link. The brightness slider is located under the settings tiles. (In old assemblies of “tens”, the brightness changes by clicking on the tile with the sun icon and only completely between two values: 0 and 100).
Action Center icon in Windows 10
Note! There is also a convenient function for switching the color gamut of the screen to night mode.
Using the buttons that change the brightness, you should set its level so that the test image is as SIMilar as possible to the central picture, or meets the user’s needs (if you often work with very bright or dark pictures, or play games with a dark atmosphere, then it is more convenient to set the parameter values higher or lower than standard).
Sample pictures for adjusting brightness
Note! The display of samples for calibration depends on the settings and the quality of the monitor, if there are doubts about their correctness, then you can adjust the parameters, referring to the examples on the screen of another computer or laptop installed nearby.
Enabling HDR and WCG Color Gamut
and more modern computers and displays support high definition (HDR) and wide color gamut (WCG) modes. To get a richer, brighter and more detailed picture when using HDR games and applications, you should enable this function, for this:
- open the “Options” section in the “Start” menu;
- go to the “System” menu, then to the “Display”;
- Selecting an HDR capable monitor (if multiple displays) from the Change Display Order menu;
- open Windows HD Color Settings;
- in the “Display capabilities” section, tick the box “Streaming video in HDR mode”.
“Ten” can support applications and games in HDR mode
Additional Information! In the same “Display” menu, you can configure the display of “pictures” on several monitors: display the image on one of them, or on both at the same time.
Screen customization in Windows 10
Correctly adjusting the Windows 10 computer screen is necessary to reduce eye strain and more comfortable work with the system, as well as if the pictures on the monitor do not look exactly the same as in reality or on other devices.
The top ten has new convenient functions for adjusting the image
For optimal rendering of graphics and correct color gamut, you should set the parameters according to the maximum capabilities of the video card and the screen matrix.
Note! In addition to the configuration tools, Windows 10 now has the ability to record what is happening on the screen using the WinAltR hotkeys.
Calibrating the Windows Screen
Screen calibration is needed to adjust its characteristics for comfortable work or play. Before starting the process, you should leave your laptop or computer turned on for half an hour or more to warm it up, and also disable all special settings for display parameters and the function of its adaptive adjustment to the user and return the data to the default ones. To enter the calibration menu:
- open the “Settings” section (the gear icon in the lower left part of the “Start” menu);
- select the tab “System”, then “Display”;
- click on the link “Additional display parameters”, if there are several monitors, select the desired one here;
- follow the link “Additional display parameters”;
- in the video adapter properties menu, click the Color Management button;
- at the bottom of the “Details” tab, click the “Calibrate screen” button.
Important! The screen should be calibrated only in the room lighting in which it will most often be used.
Calibrate Screen button in the Color Management menu
Improved Windows 10 experience
We continue to gradually reveal the ″ secrets ″ of Windows 10 Technical Preview. Another innovation introduced in this operating system is the improved Snap Assist window management mechanism.
In Windows 10, the window management feature has a new name and additional features. So if you drag the active window to the edge of the desktop, then it will be maximized by one half of the screen, and the second will display thumbnails of the remaining windows open at the moment. You can scroll through them and select the application that will be deployed to the rest of the screen.
And if the window is pulled to the corner, then it will be minimized to a quarter of the screen, and in the vacant space you can open another window from the remaining.
In total, this way you can place up to four windows on the desktop at the same time.
A feature of Snap Assist is that not all window sizes are available when positioning windows by dragging with the mouse. SIMply put, this way you can only divide the screen into 2 or 4 equal parts. However, windows can be manipulated either by dragging or using the keyboard using the Win arrow keys (⇐⇑⇒). The keys can be sequentially combined, for example:
Open the window and press Win left arrow
Then Win Up Arrow
Now Win Right Arrow
Two more times Win to the right
And Win Down Arrow. And if you press Win down again, the current window will be minimized.
As you can see, you can get more window sizes using the keyboard than dragging with the mouse. This allows you to place windows of different sizes on the desktop and arrange them in any order, for example:.
On the one hand, keyboard controls allow more flexibility in the size and position of windows. On the other hand, the result is not always what you expect. It is useless to describe it, you better try it yourself. I must say, quite a fun activity, I was stuck for half an hour # 128578;
And one more thing related to M odern applications. Windows 10 introduced windowed mode for modern applications and now they can open on the desktop like regular desktop applications. But Snap Assist does not know how to fully control the windows in which these applications are open, it can only maximize the window to half the screen, or slightly reduce it.
In general, Snap Assist, especially in combination with Task View, is, although unfinished, quite powerful tool for managing the user environment. However, Windows 10 Technical Preview is a preliminary version of the operating system, so jambs are inevitable. In the final version of the system, everything may change, and I hope that for the better.