How To Make Sure The Screen Does Not Go Out

Power settings in Windows XP

You have Windows XP operating system on your computer or laptop and you notice that the monitor screen quickly goes out?!

We go to the Start menu. Control Panel:

Further, at the very end of the large list, we find Power Supply. We go there:

First, we choose a suitable power management scheme (as shown in the picture below), since perhaps some of the proposed schemes may suit us in terms of parameters (or at least approximately it may fit).

And we configure the parameters as we need. In particular, if, for example, we believe that the screen goes off quickly in our laptop, then in the Disconnect the display column, increasing the time (after how long to turn off the display):

How To Make Sure The Screen Does Not Go Out

Do not forget to click on the Apply button and then on OK for the changes to take effect.

So, if we think that the monitor screen on our computer (laptop) goes out quickly enough, then first of all we go to the Power supply to adjust it there. And here it was shown how to do it in Windows 7 and Windows XP.

If you are faced with a situation where not only the monitor screen goes out, but the laptop screen turns off completely, you can go to the article “”.

Power settings in Windows 7

So, you have the operating system Windows 7 and the monitor screen quickly goes blank, whether it is a laptop or a stationary computer?!

We go to the Power supply section. To do this, simply right-click on the power supply icon on the Taskbar (as shown in the screenshot below) and select Power supply in the context menu that appears:

If you DO NOT see the power icon on the taskbar, then click on the small triangle icon (in the picture to the left of the power icon) with the left mouse button and find the power icon.

You can enter the Power supply in the second way.

Start menu. Control Panel:

Next, select System and Security:

So, whether we entered the Power supply section through the Taskbar or through the Start menu, now in the selected power plan we click on the link with its settings:

And already here we can configure the way we need:

1. How long does it take to dim the display (monitor) or turn it off so that it goes out completely, as well as when it puts the computer into sleep mode and adjust the screen brightness.

over, for a laptop, this can also be configured separately: Here are the batteries or From the network.

And, of course, after changing the settings, you need to save them for them to take effect:

So, if your monitor (laptop) screen goes blank quickly enough, try here to increase the time in the appropriate parameters (when the display is dimmed and turned off).

2. Since we have “climbed” into these settings, then perhaps it will be interesting for someone to delve into the additional settings:

But, this does not concern the Raised Topic, so I will leave it for independent development, especially since everything is intuitive enough there.

Similar news:

How to make a screen on a computer so as not to kerosene

Received a letter from one. who says that her monitor screen quickly fades. Literally her words: “Teach me what needs to be done so that in my laptop, NOT a kerosene monitor so quickly when I read texts?”

Of course, there are serious problems with monitors, and finding solutions to such problems can be quite serious business. So in some cases, even calling a specialist is indispensable.

But, also in many cases, the monitor screen quickly goes out simply due to the installed power settings. Therefore, first of all, novice users just need to pay attention to these settings, which we will do in this article.

Let’s talk about Windows 7 first, and then about Windows XP, so choose where you need to deal with the monitor screen.

How to prevent the screen from fading out on Windows 7

The issue we are considering is the most relevant and whole problem, mainly for users of netbooks, as well as laptops, for whom power supply issues are a priority.

Based on this, the main task of such a device is the issue of energy saving and its economical waste, and since the display backlight consumes an impressive share of energy, the device tries to save on it.

The standard settings accepted by default after installing windows 7. have the most optimal performance for a computer, but for most users they are NOT convenient or not at all acceptable. They can be changed at your own discretion, which is quite simple.

So, now we will take a step-by-step look at the solution to the current issue of a fading screen:

  • In the left corner of the bottom panel, click on the “Start” button.
  • Here we select the menu section called. “Control Panel”.
  • Next, select the item. “Power supply”.
  • Now go to “Power plan settings”.
  • Here, depending on your device, namely a personal computer or laptop, parameters are selected and set based on your own needs and preferences.
  • Thus, in this menu, you can adjust or completely disable each of the parameters that are offered. This, and will serve as a solution to the issue we are considering, how to make sure that the screen does NOT fade away on Windows 7, and will also allow you to more rationally configure the computer’s power supply system.

How to make the screen NOT kerosene on a computer

It is impossible to answer this question unequivocally. There can be a lot of reasons, to figure it out sometimes you have to test all the components and you can’t do without the help of specially trained specialists. However, a few tips can still be given in this case.

First. If your monitor goes out when you DO NOT work at the computer for a while (advice for complete beginners, and there are many of them), then this is normal, and it should be. The monitor off time can be adjusted as follows:

Right-click on the desktop and click Properties. In the window that opens, go to the “Screensaver” tab and press the “Power” button.

Opposite the item “turn off the display” set the required time after which you want it to turn off.

If the monitor turns off during your active work at the computer. There may be several reasons for this. Personally, I had such a problem (I DO NOT reprint this article, but write from personal experience) and it consisted in the fact that 15 minutes after the start of work, the monitor was kerosene, especially if any game with more or less serious graphics was launched. So then the matrix on the monitor flew to me (the monitor is naturally LCD), it can be replaced naturally only in the service center.

Also, a faulty card may be a prerequisite for monitor fading or a sudden restart of the computer. You can read how to replace it in the article “”.

You can also just try to shake the card in the slot, disconnect. connect the cable between the card and the monitor, and reinstall the drivers on the card. If all of the above does not help, then I think it is better to contact the service center.

Hello, please help. He tortured me. Can you detail? A week ago I did the cleaning. I also wiped the monitor. A damp flannel. And so. When the monitor is turned on (does not turn on the PC.) The monitor turns on (the blue light is on) (I do not turn on the computer). then the yellow light comes on. After 5.10 seconds. The yellow light goes out. MONITOR _ TURNED OFF. And then further. Quite interesting. Disconnecting the computer. monitor power cable. I move the monitor to the sofa and put it upside down. turn on the network cable, and. the monitor turns on and. most importantly, it does not turn off on its own. I transfer it to the desktop (do not disconnect from the power supply). I connect the PC. I turn on the PC and everything works as usual. This is repeated from day to day, at the end of the work. completion of work. in normal mode. WHAT IS IT? I ask for help. You can’t work like that. Thank you in advance.

the problem is that after turning on the game, the screen turns off and the computer works harder

Thank you so much for your help. I zamudokhalya every 5 minutes the monitor turned off when I was idle I tried to find the power settings myself So I did not find it, but thanks to you I found it. Thanks again.

I have such a problem, when I turn on the computer, at first everything works fine after a while the monitor turns off, that is, the light does not light, then it turns on itself and so it constantly does not even do anything for me DOES NOT give everything else the system works normally, if the music is playing the speakers also work monitor turns off Please tell me what to do not old Windows installed 7 and changed the card

and the computer is only 10 years old (1800 MHz usb), then it was still bundled with an LCD monitor, I brought Optiquest Q41 later. since the F / C burned out, I cannot take out the constant voltage drops in our district,

I have an ancient Optiquest Q41 monitor !, it was probably released before my birth, but here’s the problem. if you do not turn on the computer for a long time, the monitor first shows a darkened vertical bar in the floor of the screen. and after 15 minutes of work again all the rules. and if you work like this for a long time and no complaints at all

What to do if, after starting the disc with the game, after a while the screen turns off and the inscription: digital power saving mode?

after 2-3 seconds the LCD monitor goes out. Cleaning the computer gave nothing. monitor included via DVI card. took out an old monitor and turned it on through the VGA connector. everything is fine. Trying an LCD monitor via VGA. goes out. It seems clear. need monitor.

at the entrance to the tanks. world or warface dying monique how to be?

I run any game and the monitor goes out, but the system manager is working and the screen does not respond, I have to restart the computer

Please tell me, I have problems with the monitor, when you turn on the computer, everything is visible on the screen, but after 2-3 seconds the screen becomes dark as if it is turned off, but if you look closely, you can hardly see all the icons on the desktop, and if the screen is turned off and then turned on again but for 2-3 seconds it shows brightly and again becomes dark and again you have to look closely!

when playing workoftenks, the morgue started the monitor, the sound goes on but the game is not visible

help please. the monitor goes out once a day for a second even when working at least during idle time. you are fine again. does not affect performance. problems appeared after a sharp power outage. there were still problems with the RAM after this shutdown. from 4 bars the computer did not start. Two cleaned everything started to work. I solved this problem by flashing the mother’s BIOS. SIM card new gtx 760. Power supply unit is also new 750W silver 80

Tell me why I have striped caviar and Greyz hard?

Please tell me, I have problems with the monitor, when you turn on the computer, everything is visible on the screen, but after 2-3 seconds the screen becomes dark as if it is turned off, but if you look closely, you can hardly see all the icons on the desktop, and if the screen is turned off and then turned on again but for 2-3 seconds it shows brightly and again becomes dark and again you have to look closely!

READ  How To Take A Fingerprint On The Screen

why does the monitor go out after starting a game

my caviar goes out after entering the game World of Tanks and I don’t know what to do who will help my skype aver1238

My monitor flickers when I turn on the Worldoftanks game. But everything works the game he does not see writes that the game does NOT respond Tell me what to do.

I turn on the game after a couple of seconds the cells of the stripes are eaten then the manetor turns black there is an inscription there is a signal and everything hangs at the same time if you do not play then the computer works fine

you can check the motherboard usually dry out the air conditioners from the time of constant work replace the motherboard

Please help me when I go into the game (any) the monitor turns off (writes “signal available”), But the game works, sounds are heard, nothing helps, only the restart button, please help me what to do?

Hello guys, please help me what to do the computer worked fine went to smoke it hung, rebooted it works and the monitor does not light up, the monitor on the other computer checked everything works fine, the card also checked everything is fine, what could be the problem?

Help me, when I play something, sometimes the screen turns black, stripes appear. in 10-20 seconds everything is fine.

In some games, after a few minutes of playing, the screen turns black for 5.7 seconds. and then hangs down. There were times when the screen froze and the only solution was to restart the computer. Please help me solve this problem.

the monitor goes out when I go into the game then after reboot asks unzIP 32 I downloaded this file but without the original

hello, I have a problem the monitor goes out after 10.15 minutes playing in the world of Tanks what to do?

Hello, please help me, I have problems when I go into the game Warface and play after 10 or 20 minutes, the monitor does not show everything and everything black is frozen except for overload, there is nothing to do, sometimes there is a strip monitor and gradually darkens during the game, but you can hear that the game is going on, I press the keys like walks and plays but the monitor does not show me Laptop Hp Pavilion dv7 I will be very grateful if anyone can help with the wound thanks !

ATP for the tip 🙂

hello, please help me when playing for example (Sims) the monitor turns off and writes signal comments, the rest everything works, I have to reboot all the time, I will be very grateful if anyone can help.

Dell 23 monitor is new, LG 17 stood for it. Such a problem, in some games the image is interrupted, the screen is black, after 3-5 seconds it dies. Also in 3-DMarck it freezes and only restart does NOT respond to any commands. Please tell me what’s the matter.

When I play, the screen becomes black and there is no signal, but the game goes on, the sounds are all there but the black screen. What should I do.

Kerosene monitor. It turned out that the kander on vidyuha was ripping open.

how to fix the error Problem Signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Language Code: 1049 information about this problem: BCCode: 116 BCP1: FFFFFA8006E50200 BCP2: FFFFF8800FD11630 BCP3: FFFFFFFFC000009A BCP4: 0000000000000001 OS Version Service Pack: 1_0 Product: 256_1 Files containing information about this issue: C: WindowsMinidump112712-15319-01.dmp C: UsersSergeyAppDataLocalTempWER-34491-0.sysdata.xml Review the online privacy statements: http://go.microsoft.com / fwlink /? linkid = 104288clcid = 0x0419 If the online privacy statement is not available, please see its local version: C: Windowssystem32u-RUerofflps.txt

I turn on the PC it works for 30 minutes then the monitor goes out but everything else works then I turn on the monitor back 2s works and goes out again I turn off the monitor it will rest for 20 minutes and again for 30 minutes help

Good day to all, I have such a problem, I turn on the computer, the monitor also turns on and after a second goes out, I turn off the monitor on the button, then immediately turn it on after a second, it turns off again, what could be the problem

My monitor also goes out if I even play any game online, or I changed everything offline and changed the Windows and Drava changed and changed the monitor anyway, it’s useless what to do I don’t know, maybe tell me

Rinat. Try to do what I wrote on 10/22/12.

Tell me please! computer, sk is connected to the LG 3D CINEMA monitor, everything was fine, but today the Energy saving window began to go out and pops up, connected a simple monitor everything works fine, what happened?

please tell me I’m sitting on the internet everything is fine current I will start the game for example: Lineage 2 or Counter-strike I play for 10-15 minutes and the screen goes out and writes the cable is disconnected what is the problem?

the computer works the norms as soon as I turn on the game the world of the tank after a while the manitor goes out, although the sound goes on I restart the pc and again this crap people tell me what crap I will be very grateful

I suffered for half a year when playing games after 5-10 minutes. the monitor turned off NO SIGNAL was displayed. This card turned off the monitor. I downloaded the EVGA Precision v.2.1.1 program from the Internet, adjusted the frequencies of the card and now I don’t know the problems, everything is OK! First, it is necessary to regulate in the direction of decrease. The core of the card is most likely overclocked. Once you find the frequencies you want, fix them and everything will be fine. They will remain so with you. Play to your health. If you can help someone, I will be glad.

Hello, such a problem, I’ll say right away it only arises when working with client-side online games (tested on World of Tanks, lol, warface) and it works fine. The bottom line is that after 10-15 minutes of the game client’s work, the screen goes out and an inscription appears “Digital Power Saving Mode”. I did everything I could, reinstall Windows, drivers, antiviruses, nothing helps ((tell me, can anyone know what to do? Windows 7 system, stationary computer. And the rest of the programs, games work fine without crashes).

I turn on the computer boots, the monitor shows the download then the image comments but the green lamp is on when the monitor is pressed again the image is present for 1 second the desktop is visible everything is loaded, what needs to be done?

there are no specific answers. some questions

When I turn on the computer and start the game, the monitor turns off and the energy-saving mode appears and the system unit works well, but what is the problem?

help me have this problem my monitor turns off when the screen turns on it is off but everything works.

Hello! I have such a problem, I turn on the laptop. After that, 10-15 minutes pass and the screen becomes darker, this happens when it is NOT plugged into the socket, and when it is plugged into the socket it works fine! A laptop bought a day ago Help.

I have such a problem, I turn on the computer, the monitor also turns on and immediately goes out, I turn off the monitor on the button, then immediately turn it on after 2 seconds, it turns off again, what could be the problem

I have this problem: when I turn on the computer there is an image, but after 2 seconds it disappears. I’ve already tried everything but nothing helps. Something with the monitor because I turned on the monitor on another computer, and there He did not work. Is there sound.

Hi: I have this problem, I turn on the computer, I go into the game World of Tanks, I play for about 40-50 minutes after that, the monitor goes out, the inscription inergo-saving mode goes out, and the computer beeps but the computer works, I have to reboot, please help. And if anyone plays the online game World of Tanks write me my nickname DJAHAR

People help turn on the game the screen turns black what to do

to Edward. The reason may be in the card. Test the games on a different map.

There was a problem recently. It may NOT show itself for a long time if you play a weak game or just, say, sit in the internet, but if you start, for example, Diablo the third, the monitor goes out almost immediately and the inscription appears “signal available”. What could be the reason?

Hello. I have such a problem when I press the left alt button my monitor goes blank. and with the right alt everything is in order. and this is not the first time. tell me what it can be and how to fix it

Such a problem: I launch the game (for example counter-strike or NFS Most Wanted), the sound goes on, and the screen is black, or blinks (a picture appears and immediately disappears). Radeon HD 2600 pro card, Windows. XP 32 bit. I have already changed the driver several times, but nothing helped. WHAT TO DO? soap:

my monitor is dark only when turned on. turning off the monitor and reconnecting the wire saves, but not always right away. at the same time, the image on the screen is poorly visible when turned on (as at low brightness). What can be wrong?

My computer is connected to an LCD 32LG TV via an HDMI cable, and no, it turns off temporarily for a second. What is the problem. Thank you very much in advance. all components are not power saving disabled (NEVER) on my Windouws 7. I am looking forward to hearing. thanks.

the laptop often goes blank, and when I play, and even if I just watch a movie, but all programs work fine even after extinguishing, I have to forcibly shut down the laptop. how to fix?

Hello, such a problem, the monitor goes out, followed by freezing in games, tell me what to do if you encounter this Soap

When I turn on the computer, everything goes on for me, then it will take 10 seconds and it goes out, I turn off and turn on the monitor and then after 10-15 minutes, it turns off the chipset, but the card was set to normal, but the monitor was kerosene and set the power to it at the factory settings did everything help pliz!

hello i have such a problem. Previously, when the power supply was NOT stable, the monitor Migal disappeared, the picture was all black and in a second the picture appeared. and then in a second they disappeared again. And the main thing in games was not done that way. I bought a powerful stabilizer and for half a year everything is fine. but now everything has started again, and the stabilizer shows normal operation. But now in games, too, it started like that, but the current in those that take up little 800MB somewhere, and in those that do not take much. what to do?

why the navigator monitor goes out.

There are buttons on the monitor (bottom or side). Dig deeper, set the factory settings. can help.

guys, please answer the question, (I turn on the camp, disconnecting it from the charger: it goes out after 2 seconds, and when you connect it, the screen burns normally, and when you pull out the charging it stupidly goes out, I have a laptop, ASUS) tell me guys, thanks in advance.

Guys, please tell me, I turn on the monitor, it works for 2 seconds and goes out, and if I care about it, I see a little bit of what is happening on the screen, I turn it off and turn it on again and again it is the same = (((help please !

by the way I have intel core 2 duo, 4gb RAM, 2.40.

My problem is this: when I played quietly in the game (who is interested. Left 4 Dead 2), I got a black screen, I thought that the game was frozen, then I rebooted the computer, it showed the screen for two seconds, and then went out. after two minutes I pressed the button to turn off the monitor, and then pressed it again, then it showed me the acer icon then showed the desktop for a couple of seconds and went out and I noticed that when he showed me the screen, it seemed to flicker.

READ  How To Record Screen With Voice

HELLO! I overloaded the win xp prof-l the monitor goes out after loading but it works in a safe mode I can even go to the Internet help with advice pliz!

if anyone can answer, write in a personal to VK Nas.Dr! thanks in advance!

Hi everyone! the monitor goes out after 3 seconds after turning on, I try to turn off and on the monitor only works again for 3 seconds. What is the problem I can’t understand and I pulled out the cords and poked them. What does NOT help. what to do?

in Kago, the monitor goes out when you work at the computer, add to Skype (reperok-fast) together Break your head 🙂

Hello! I ran through the recording, did not find a problem similar to mine (I have a Lenovo beech laptop, Windows Vista)) before everything was normal, like, but right now the monitor goes out if I, for example, Vilma, watch a or some, two minutes later. and when to move the mouse. again all the rules, i.e. As if the screensaver turns on or something, but I just fumbled through the settings for the hundredth time, there are all the rules like, damn it! what to do?)) tell someone please)

When you turn on the computer, it will load a little, then it will go out again and will be loaded. And so it is repeated several times then everything goes out. what to do?

Dear visitors. To find out if your monitor is really faulty, connect it to a second computer. If the monitor is faulty, then take it to the service center, by empty pressing the buttons, the monitors are NOT repaired. The same goes for the card: Test it. Keep track of the system requirements of the games that by installing.

my mon goes out if you turn off and turn on the monitor, it lights up and after 5-8 seconds it goes out again what could be the problem? Yes, but when you turn off the screen on the button and immediately turn it on, then the screen works again for 5 seconds and then goes out and so on all the time

my mon goes out if you turn off and turn on the monitor it lights up and after 5-8 seconds it goes out again, what could be the problem? Yes, but when you turn off the screen on the button and immediately turn it on, the screen works again for 5 seconds and then goes out and so on all the time

Help please: my monitor goes out immediately after starting Windows, if you turn off and turn on the monitor, it lights up and after 5-8 seconds goes out again, what could be the problem? Yes, but when you turn off the screen on the button and immediately turn it on, the screen works again for 5 seconds and then goes out and so on all the time

Good afternoon, I have such a problem: the monitor turns off completely, the green light is off, but it turns off when it wants to. Mostly it turns off when it is moved. This was not the case before, the computer is 2 years old. Help please. Thanks in advance.

Yesterday the monitor started to go out, rebooted the PC and went out again. 2-3 rebooted and it seemed normal, 10-20 minutes passed and went out again. today in the morning, kerosene is the same, then it seems to have calmed down and worked for 3-4 hours. it went out again, bastard ((There is a 2nd set of cords to the monitor, nothing helps. By the way, if it goes out when the computer is loaded, then it writes power saving mode saving energy), and if the computer boots up and the monitor works for a while, it just goes out, does not write anything.

And my computer turns off if it stands idle for a long time, stirring the soap does not help, you just need to turn off and turn on the monitor. What to do what to do with it?

my Monit goes out

my monitor goes out every Friday evening, and on Sunday evening the norms turn on again and so on for the third week. what can be the problem.

Why does the monitor lag when I turn on a game or a movie? some beauty stripes

Good afternoon! The monitor goes out as soon as Windows is loaded. Yesterday, kerosene to turn on the game, and now has NOT loaded the operating system to the end. The processor seems to be working properly. I look forward to advice! thanks in advance.

The computer is constantly working normally. but the monitor goes out only when you start the game Hunt in Alaska. What is the problem? All other games work fine.

Help please: my monitor goes out immediately after starting Windows, if you turn off and turn on the monitor, it lights up and after 5-8 seconds goes out again, what could be the problem?

Hello! I have an old samtron monitor. After a while after heating, it turns off. (Heating is weak) I hit it lightly and turn on again but for a short time. It seems that the matter is in contact somewhere in the body. Tell me How to fix)

and what can be done to make it not so warm.

to sasha. This may be due to the fact that it is heating up, but if it reacts to a large overheating, then this is already a mess

and this may be due to the fact that it is very hot. it just started yesterday but then he was blown up! but then again!

Yes, it’s about the map.

and if after connecting to the second system unit it will work, then the matter is in the card.

to sasha. Connect the monitor to the second system unit. Try to test another cord.

help please my monitor goes out after turning on the system unit! I press the power button on the monitor, it lights up and after 2-3 seconds it goes out again! I tried to change the cord in places, the same thing happens! It also goes out when I pull the cord out of the monitor and put it back in. it lights up and goes out! The system manager works at the same time! monitor activity indicator too! does not write that “signal available”! help pliz!

to the Slavs. Something may overheat: map or oregano. Is the case big? If it is small, then perhaps the components are overheating in a small space. I once removed a similar problem by replacing the old small case with a more spacious one and, plus, put another additional cooler for extracting warm air. Only in that case the computer started to reboot 15 minutes after starting the game. I could also just fly vidyuha.

I had another problem (this was not the case before): when using an antivirus, the player and other standard programs work fine, but if something more serious (games) the monitor goes out after 15 minutes and the cooler makes a terrible noise. help to solve the problem

help me please, my monitor goes out when I am on the Internet or in a Word, and when I turn on the button on the monitor, it goes out again after 20 seconds help pliz.

I have such a problem, I turn on the computer and the monitor naturally burns for 5 seconds and turns off, and if you listen, it beeps again. What is the problem, tell me what to do?

to dima. Matrix. This is a board that plugs into an LCD monitor. I have it replaced under warranty. You just connect the monitor to the second PC and if it goes out again, then most likely this is it and you cannot do without a service.

it consisted in the fact that 15 minutes after the start of work, the monitor was kerosene, especially if any game with more or less serious graphics was launched. I ALSO have a shit. AND WHAT DO I lose the matrix to change the gallery ?? AND WHAT IS A MATRIX ??

my monitor (lcd) goes out after half an hour or an hour of work, usually when I work in word and / or the browser is running. I can’t understand why this is happening

Hello, I have such a problem, I turn on the computer, the monitor also turns on and immediately goes out, I turn off the monitor on the button, then I immediately turn it on after 2 seconds, it turns off again, what could be the problem

help please. when I turn on the computer it works and the manitor goes into energy-saving mode.

I have a problem like this, I never turn off the display, but the screen still goes blank, what to do?

Thank you very much, I thought for a long time how to make a shtob not extinguished thanks

the monitor turns off after half an hour.

Thanks for the tip! otherwise I was already slowly going crazy: guinda:

I have a problem that I can not play new games, the game can last for a while. then the monitor goes out and the button blinks (while in Skype I continue to communicate with a friend) restarting does not help, just turn off the computer.

Hello, I have such a problem, I turn on the computer, the monitor also turns on and immediately goes out, I turn off the monitor on the button, then I immediately turn it on after 2 seconds, it turns off again, what could be the problem

The problem is this. I am connecting my ViewSonic VA902 monitor to my laptop. I switch to the monitor, it burns for a couple of seconds and goes out. If you can see the whole desktop, but it’s very bad. How to make it not go out right away? There are no instructions and there are no official website ((

to oleg. Read this article, can it help: http: //comp-profi.com/view_post.php? ID = 166

but my problem is this. there was a virus in the computer and it was necessary to reinstall Windows and when it was reinstalled for some reason, one driver was not installed on the monitor. now you need to find it and what the fuck he knows.

thank you very much for the tip, I am very grateful

How to make the screen NOT kerosene on the photo on a computer

How to treat inflammation of the ovaries at home How to clean gilding at home at home How to search for words in a Word

Black screen when the monitor is running

The most simple method was considered above, which allows you to fix the problem of a dying monitor directly by system means. However, sometimes it happens that the monitor does not work at all, and here completely different manipulations are required.

The appearance of a black screen and fading of the display can be caused by other more serious reasons that require more radical solutions:

  • Excessive humidity in the room where the computer and monitor are used can have a negative effect. Condensed water can collect directly on the surface of the monitor. Since water is a fairly good conductor of current, due to its accumulation, it can cause the monitor to malfunction, up to its complete shutdown. In the event of a similar situation, you should simply let the monitor dry out. Often this will be the solution to the problem in question.
  • If the monitor goes out and does not turn on, or it is active, but instead of an image it gives out a purely black screen, then most likely the problem is in a faulty matrix. In order to make sure of this assumption, you just need to connect the desired monitor to the second computer, and also try to change the connection cable itself. If the monitor is already connected to the second computer using a new cable, but the problem persists, then the help of an experienced electronics engineer is already required. It is highly discouraged to carry out such repairs on your own without the appropriate skills.
  • Another major problem can be a faulty card. In this case, you should also try it on another computer and test it. It is also possible that the card simply overheats a lot, and then it is necessary to check its cooling system for serviceability. Most often, this problem is solved by fixing the fan, in the case of using an active cooling system. If passive cooling is used, then in this case, either its repair or a complete replacement will be required. In addition, you should check for serviceability and the card connector itself on the motherboard.
  • The cause of the problem may also lie in a malfunction of the second component parts of the computer. In this case, if possible, you should check each of the nodes in turn. The reason may lie in the motherboard, power supply, memory modules, and so on.
  • A fairly commonplace and frequent problem is poor or Broken contact. Thus, the problem lies in the cable connecting the system unit to the monitor, as well as the corresponding connector. This flaw is quite easy to identify and fix.
READ  How To Record Screen On A51

If you find the first signs of a monitor malfunction, you should search for the problem and fix it as soon as possible. Timely repair measures can extend the life of the computer for several more years.

Similar news:

Power settings in Windows XP

You have Windows XP operating system on your computer or laptop and you notice that the monitor screen quickly goes out?!

We go to the Start menu. Control Panel:

Further, at the very end of the large list, we find Power Supply. We go there:

First, we choose a suitable power management scheme (as shown in the picture below), since perhaps some of the proposed schemes may suit us in terms of parameters (or at least approximately it may fit).

And we configure the parameters as we need. In particular, if, for example, we believe that the screen goes off quickly in our laptop, then in the Disconnect the display column, increasing the time (after how long to turn off the display):

Do not forget to click on the Apply button and then on OK for the changes to take effect.

So, if we think that the monitor screen on our computer (laptop) goes out quickly enough, then first of all we go to the Power supply to adjust it there. And here it was shown how to do it in Windows 7 and Windows XP.

If you are faced with a situation where not only the monitor screen goes out, but the laptop screen turns off completely, you can go to the article “”.

How to make sure that the screen of a Xiaomi phone does NOT turn off

On phones running the MiUI system, the “Display” section has a sleep mode setting. But on Xiaomi phones, you can also make sure that the screen does NOT turn off.

To do this, go to the settings, in the System and device section, select Lock and protection:

Under Lock screen, select Sleep:

In the dialog box that opens, select the time after which the phone screen should go out:

Hello friends! Our reader Igor (igorhao) has found a solution to an interesting problem, I am acquainting you with the details. than a year ago, with the birth of Windows 10, I faced one interesting problem several times. Clients bring me a laptop and complain about it. that after several minutes of inactivity, the laptop’s monitor screen turned off by itself. At first glance, there is nothing surprising in this, it means in the settings of the power supply scheme, in the “Disable display” parameter. these very few minutes were exposed, but in the end, the matter turned out to be completely different.

How to make the screen NOT kerosene in Android

It’s even easier on Android devices.

  • Open Settings.
  • We are looking for the item “Screen” and in it the section “auto-lock”, “Sleep mode” or something like that. On Flyme 7 and Android 7.1.2 it looks like “Screen and brightness” and then “auto-lock”.
  • Select the time interval, during which the display will not turn off. In the settings on the aforementioned OS in a company with a software shell, the maximum is 30 minutes.

Mobile applications that prevent turning off the phone screen

There are also a number of mobile applications that allow you to make the screen of phones kerosene.

Among them, we note the following:

Application Description:
“Keep Screen On”There are several handy options here, including a proximity sensor, settings for each app, and the ability to keep the screen on while the device is charging. In general, in terms of its functionality, it is inferior to the applications described below, but due to its free nature it can be an excellent choice.
“Stay Alive”offers an impressive number of free options as well as additional features for a fee. For free, you can leave the screen on for an indefinite time, configure the screen off settings for a specific application, and turn off the program if the battery reaches a certain level of discharge. Paid options for solid black, an alternate lock screen when pressed, auto-start at boot, and more.
“Wakey”does all the work of keeping the screen on for free. You just click on the light bulb inside the app and the screen does NOT go dark until you want to. The free version also has a timer and dimming option. The paid version has Auto power off, keeping the screen on while charging, and the option to wake up the processor.

While the light is on, the screen will NOT go out

In general, the listed applications are a good alternative, allowing you to make sure that the display of your smartphone does not turn off for a long time.

Extending Display Life on iOS

On gadgets from Apple, the method that allows the screen of a mobile device to NOT go out looks similar. Go to Settings, there select “Screen and brightness”, then select “auto-lock”, and tap on “Never”.

Select “Never Disconnect”

How to make the screen NOT kerosene in iOS

On iOS, you can also cancel the automatic shutdown of the display in a few taps.

  • Go to “Settings”.
  • We select “Screen and brightness”.
  • We press “auto-blocking” and select “Never”.

Also, auto-blocking can be configured from the “Battery” section. Screenshots capture iOS 12.1 on iPad.

It is difficult to imagine usage scenarios in which a permanent display is needed constantly. And if, when a computer or laptop is working from the network, It will not be noticeable, then on mobile devices it will pretty much drain the battery. Therefore, do not forget to return the settings to the original ones, as soon as you will NOT need this option anymore.

If you want to know how to keep the screen on your Android phone or tablet on longer, you are not alone. Fortunately, this is very easy to do, it just takes a few taps.

The mode when the phone screen turns off is called “sleeping”. It usually turns on 30 seconds after the last action. This is enough for many users, but, for example, if you read a lot from your phone, you may not have enough time. Or, for example, you cook food according to the recipe found on the tablet. you will not constantly press the screen with your hands in flour so that it does not turn off?

On our YouTube channel, we have posted an instruction. If you prefer to read. scroll down below:

To change the time to enter sleep mode, go to Settings Screen sleep mode and select a more suitable time.

It is important to remember that the screen is the most “voracious” part of your phone and tablet in terms of energy, therefore, the longer it is turned on, the faster the battery will drain.

What to do to prevent the smartphone screen from turning off during recharging

In the developer section, there is an option to NOT turn off the phone while it is charging. To do this, you need to go to the gadget settings, select the “For developers” section (Developer options), and activate the “Do not turn off the screen” option (or “Active mode”).

DO NOT turn off the screen while charging your phone

How to make the screen NOT kerosene in Windows

In order for a computer or laptop running Windows OS not to have a kerosene screen, you need to configure two parameters: the auto-off time, and the time to enter sleep mode. Fortunately, they are located in the same settings section.

  • In Windows 10, click on the Start button in the form of windows, and we find the gears of the “parameters”.
  • We select the item “System”.
  • We go into “Power and sleep mode”.
  • In the subheadings “Screen”, select the time after which the equipment will be switched off when the user is inactive: from 1 minute to 5 hours or “Never”. If you have a laptop, you can configure this setting while on battery power, plugged in, or both, depending on how you normally use the laptop.
  • In the subheadings “Sleep” we do the same so that the computer does NOT go into sleep mode while you need an active display.

In our material, we have analyzed how to make sure that the mobile phone screen does NOT go out for a long time. And also what methods and tools can help us with this. If the standard functionality of the operating system is not enough, use the special applications described above. Their capabilities allow you to deactivate Auto-off display, and enjoy the desired functionality of your gadget.

By default, after installing Windows 7, it is configured so that after 5-10 minutes of inactivity, when the user does NOT press any buttons and does NOT touch the mouse, the screen first dims, and after a few moments it turns off completely.

This is done in order to save energy and resources of your monitor. But this function is far from always convenient and often turns off the monitor at the most inopportune moment.

Now we will learn how to make sure that the screen does NOT fade in Windows 7.

First you need to go to the control panel in any way you know. For example, through the Start menu.

We go to the control panel

In the control panel window that opens, look for the “Power supply” icon.

Power supply in windows 7 control panel

Next, at the top left, we are looking for the term “Setting the display to turn off” and click on it.

Setting to turn off the display in windows 7

The last thing to do so that the screen does NOT fade away on Windows 7 is in the newly opened window in the line “Turn off the display” select “Never” and click the “Save Changes” button below.

Making the screen NOT fade away in Windows 7

Anastasia Pashkevich © November 24, 2018

By default, the display of devices turns off after a few minutes of inactivity, which is justified by saving energy. But there are situations when it is necessary for him to remain active: for example, I need it when I redraw pictures from a tablet. It is very easy to make the screen NOT kerosene in the settings of any device on any operating system.

How to keep the screen of an Android smartphone from dimming

The functionality of the Android OS allows us to customize the time after which your screen will be turned off. To do this, go to the settings of your phone, there select the “Screen” (Screen) section, and in this section, find the “Screen timeout” option. Here you can select the time to turn off the display. Usually the maximum level is 30 minutes.

Maximum mode. 30 minutes

In the second phone models, this option can be found along the “Screen” path, then “Advanced” and “Sleep mode”.

Configure Auto Screen Off

In other models, this is done by switching to “Screen and brightness” and selecting the “auto-lock” option.

On Xiaomi phones, the “Sleep” option can be found in the “Lock and Protection” section.

Sleep mode in Xiaomi phones

On standard Android OS, you will NOT be able to completely disable Smartphone Display Fade. And the maximum shutdown interval is 30 minutes. But on firmwares of the MIUI and EMUI level, this is quite possible, there is an option “Do not turn off” or “Never”.

OS skins allow NOT to turn off the screen

| Contacts | Content | RSS