How to make the screen go blank when talking

How to prevent Xiaomi phone screen from turning off

On phones running the MiUI system, there is no sleep mode setting in the “Display” section. But on Xiaomi phones, you can also make sure that the screen does not turn off.

To do this, go to the settings, in the System and device section, select Lock and protection:

make, screen, blank, talking

In the Lock screen section, select Sleep:

In the dialog box that opens, select the time after which the phone screen should go out:

How to prevent the screen from turning off when charging

Hibernation is not enough for your purposes? On Android, you can turn off the mode so that the screen will not turn off while charging. In this mode, you can use your phone as a night light.

To activate this mode, you need to go to Settings For Developers (if there is no such item, read the article “How to enter developer mode on Android”) and check the box “Do not turn off the screen”.

Now, when connected to a charger, the screen of the Android device will be always on (but it can also be turned off by pressing the power button).

How to keep the Android screen from turning off

If you want to know how to keep the screen on your Android phone or tablet on longer, you are not alone. Fortunately, this is very easy to do, it just takes a few taps.

The mode when the phone screen turns off is called “sleeping”. It usually turns on 30 seconds after the last action. This is enough for many users, but, for example, if you read a lot from your phone, you may not have enough time. Or, for example, you cook food according to the recipe found on the tablet. you will not constantly press the screen with your hands in flour so that it does not turn off?

We have published a video tutorial on our YouTube channel. If you prefer to read. scroll below:

To change the time to enter sleep mode, go to Settings Screen Sleep mode and select a more suitable time.

It is important to remember that the screen is the most “voracious” part of your phone and tablet in terms of energy, therefore, the longer it is turned on, the faster the battery will drain.

How to keep the screen from turning off on any Android phone

If your phone does not have screen sleep settings or the time offered by the manufacturer is not enough, you can install the No screen off app. This application is available in the Play Market. It does not support the Russian language and has not been updated for a long time, but it continues to work properly (and does not contain ads!)

The application is very simple. when launched, it turns off the sleep timer (i.e. the phone screen will remain on until the battery runs out or until you turn it off). When you click on the application icon again (or when you click on the icon with the sun in the shade), the sleep timer turns on (the value you set in the settings is returned). Here’s a demo of how the app works:

How to set the time to dim the screen, go to sleep or standby mode for your computer or laptop. How to make sure that the display of a computer / laptop does not go out, does not turn off or darken, or vice versa, and adjust the brightness of the display. Windows 7, 8, 10

So, many users are faced with certain inconveniences associated with Windows energy saving settings, such as an unacceptable or simply inconvenient time to turn off the display off or completely go into sleep mode.

Someone would like the computer to turn off the display and fall asleep earlier than the default, but someone does not like that the display goes out or the computer goes into sleep mode too quickly. And someone just would like to adjust the brightness of the laptop or computer display.

Setting up all this is quite simple, therefore, after reading this manual, you will never again have any difficulties with this kind of settings.

  • The first thing we need to do is just right-click on any empty spot on the desktop. The context menu list appears:
  • We select the item “personalization”. The following window appears:
  • Left-click on the word “splash screen” in the lower right corner. We see the following:
  • click the left mouse button on the inscription “change power supply parameters”. A new window appears:
  • now you need to click on the inscription “setting up the power plan” in that line, the beginning of which is marked with a tick (black circles, indicated by an arrow in the screenshot). A window appears directly for the settings of the energy management system:
  • In this window, by pressing the small arrows opposite the values, select the desired time for dimming the display, turning it off and leaving the PC in sleep mode. You set yourself when the display will go out or darken, choose the time when the monitor will turn off and go out, determine the time after which the computer can go into sleep mode. Here you can adjust the brightness of your laptop display by dragging the slider located opposite the inscription “adjust the brightness of the plan”.
  • When everything is configured, press the “save changes” button

Done! Now your PC behaves the way you would like it to.
HOW TO IMPROVE YOUR SMARTPHONE / TABLET

Solution four if the phone screen goes out. disabling the sensor

If your phone is no longer under warranty, and all other solutions have not helped, then the sensor is probably physically damaged, so the screen goes blank immediately after the call starts.

If you do not want to spend money on service, then turn off the screen off during a call.

As a result, the screen will be constantly lit during a call, and you can use the on-screen buttons to activate the speakerphone or remove the keyboard.

The disadvantage of this solution is that when we are talking with a lighted screen, we can accidentally press the buttons.

In order to be able to disable the proximity sensor, you need to install a special module Xposed Framework.

To do this, you need to get ROOT (ROOT rights) to get administrative privileges,

Solution three when the phone screen goes out on an outgoing call. restore factory settings

Another option you can try is to factory reset your phone.

Unfortunately, this option deletes all data from your phone, so be sure to copy files, photos, music, videos, contacts, SMS and more to a safe place.

Then go to “Settings Backup & Reset” and select “Factory Settings”.

Depending on the brand and installed software version, the factory settings may also be located in a different location.

After confirmation, the phone will reboot and all data will be deleted, and the device settings will be reset to factory default.

When you turn on your phone for the first time, you need to re-enter the settings (choose your language, sign in to your Google account, etc.).

After completing the operation, make sure that the screen is working properly during a call and does not go out.

Why does Android screen go blank during a call?

On your Android, when you call, the screen immediately goes blank and turns black? If so, then the problem is most likely with the proximity sensor in the phone. By the way, you can easily check it. the instruction is here.

This problem can appear in any phone, for example, sony xperia, Mi Xiaomi, lumiya, compact, Samsung, asus, Xiaomi Xiaomi, but it has been noticed that most often the screen goes blank on sony z3.

over, it happens that it goes out and does not turn on. this is no longer a joke. If this happens when you answer a call or make an outgoing call, then most often the culprit is the proximity sensor.

What is a sensor and how does it work in Android? Proximity sensor has several functions, but the most important task is to automatically dim and backlight the display during a voice call.

It does this by identifying what’s next to your face and phone. When the phone approaches your ear, the sensor detects your head and the screen turns off to avoid draining the battery and to prevent accidental disconnection of the conversation.

In turn, when you remove the phone from your ear, the screen lights up so that you can disconnect the call or use other functions (numeric keypad, switch the conversation to the speaker, etc.).

When it comes to damage to the proximity sensor, the mechanism described above stops working, so the phone has no way of inferring whether it is currently near a face.

The problem with the proximity sensor usually manifests itself in the fact that the screen immediately goes out during a call and lights up only after a call, or vice versa. the screen does not go out, even if you put it to your face during a call.

Solution one when the phone screen goes out with an incoming call. remove the film or glass

First of all, remove the film or tempered glass from the phone screen. In some smartphones, due to their design, they can cover the sensor and cause an erroneous detection distance.

Tearing off the tempered glass can restore the normal functioning of the sensor.

Of course, for some it may seem ridiculous, but uncle Google or Yandex will give you hundreds of records from their “warehouse”, where users complain about problems with the proximity sensor after gluing poor quality glass.

Solution two if the phone screen goes out when the call is answered. calibration

Sometimes the problem lies in software updates, for example, which for some reason contributes to the deregulation of the proximity sensor.

In this case, you can use a free application that, when installed in several stages, can calibrate the sensor, for example, Proximity Sensor Reset.

It is not difficult to use it. the wizard will guide you through the entire process, and at the end you must confirm the new calibration, which will reboot the phone.

After that, you can make sure whether the calibration helped and now the phone screen does not go out during a call.

Causes of Proximity Sensor Problems When the Screen Turns Off During a Call

The problem with the sensor can occur both in the software and in purely mechanical damage.

If the problem is software related, you can often fix it yourself.

For example, by re-calibrating the sensor, by restoring the phone to factory settings, or by reinstalling software.

Calibrating the screen solves many problems. How to make it the guide is here.

If the problem was the result, for example, the phone was dropped, then there was probably a mechanical damage to the sensor.

This often also happens when there is a “film tearing” from the upper part of the case with the lower part of the phone (in particular, on the Sony Xperia).

Of course, purely mechanical problems are best dealt with by sending the equipment to service, because replacing the sensor is not easy.

Phone Screen Still Goes Off. A Few Proven Tips

Some owners were helped by the option of cleaning the speaker mesh. Sometimes there is a motion sensor. Take a small brush and clean everything neatly. suddenly it will help you too

There are cases that on the Xperia Z3, with strong pressure on the top of the screen, even a click is heard inside and the problem disappears.

Some smartphones have a smart processing option in the call settings. try turning it off if you find.

Sony phones very often have the screen detached from the case and such a problem arises. neat gluing solves it.

You can also disable the incall ui application in the application settings. If this does not help, then in the notification settings try to enable notifications for this application.

READ  How To Make Undertail Full Screen

Of course, other reasons are in no way excluded, but I will end there. As they say, what he could, so he helped. Success.

Windows 10 tips and tricks. How to set the blank time for the lock screen on a PC, laptop or tablet

Users of devices running the Microsoft Windows 10 operating system are well aware that in it, as in Windows 8.1, before accessing the desktop, we get to the lock screen, which now displays information about the date and time, messages from individual applications and also. your own wallpapers, which automatically change from time to time.

In Windows 10, by default, the lock screen is set to blank if there is no user action for 60 seconds. At the same time, there are no controls in the system settings in order to increase or decrease it. If you would like to do this, but do not know how to set the time you need, then today I will tell you how to do it.

Windows 10: Turn off the screen in lock mode | IT Notes on WordPress.com

The new Windows 10 OS seems to have been released with a lot of flaws (small and not so). Some of them do not directly affect the functionality of the OS, but they cause some discomfort.

One of these shortcomings is the absence in the OS settings, by default, of the ability to adjust the waiting time before the screen turns off in the computer lock mode. The user locks the computer and, after half a minute or a minute, the monitor screen turns off.

A solution to this problem was found on the Microsoft support forums. The procedure is as follows:

  • Launch Registry Editor (regedit.exe) and go to HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Power \ PowerSettings \ 7516b95f-f776-4464-8c53-06167f40cc99 \ 8EC4B3A5-6868-48c2-BE75-4F3044BE88A7.
  • Set Attributes to 2 (dword: 00000002) and close Registry Editor.
  • Open advanced power options (Control Panel \ Hardware and Sound \ Power Options \ Change circuit settings \ Change advanced power settings). In the window that opens, in the “Screen” branch, a new item “Waiting time until the console lock screen turns off” will appear. Its default value will be “1 minute”. Set the waiting time interval you need and click “OK”.

All. Now the monitor screen in lock mode will go out after a user-set time.

By the way, this method also works for Windows 8.1, which has the same problem.

How to keep the screen on Windows 10 from turning off

To prevent Windows 10 from turning off the monitor, enter the classic control panel and go to the power section.

Then it is advisable to set the settings for high performance and then click on the line: “Setting the power supply scheme”.

Now, as in fig. below, select the option never disable. Then click “save changes”.

You can go even further. click on the line: “change additional power settings” and at all points related to turning off the screen / monitor, select “never” so that it does not turn off itself.

NOTE: I still recommend not setting on never, especially on battery power if it’s a laptop. I set the screen to turn off after 5 minutes and turn off the monitor in the computer after 10 minutes. Success.

How to set the time to dim the screen, go to sleep or standby mode for your computer or laptop. How to make sure that the display of a computer / laptop does not go out, does not turn off or darken, or vice versa, and adjust the brightness of the display. Windows 7, 8, 10

So, many users are faced with certain inconveniences associated with Windows energy saving settings, such as an unacceptable or simply inconvenient time to turn off the display off or completely go into sleep mode.

Someone would like the computer to turn off the display and fall asleep earlier than the default, but someone does not like that the display goes out or the computer goes into sleep mode too quickly. And someone just would like to adjust the brightness of the laptop or computer display.

Setting up all this is quite simple, therefore, after reading this manual, you will never again have any difficulties with this kind of settings.

  • The first thing we need to do is just right-click on any empty spot on the desktop. The context menu list appears:
  • We select the item “personalization”. The following window appears:
  • Left-click on the word “splash screen” in the lower right corner. We see the following:
  • click the left mouse button on the inscription “change power supply parameters”. A new window appears:
  • now you need to click on the inscription “setting up the power plan” in that line, the beginning of which is marked with a tick (black circles, indicated by an arrow in the screenshot). A window appears directly for the settings of the energy management system:
  • In this window, by pressing the small arrows opposite the values, select the desired time for dimming the display, turning it off and leaving the PC in sleep mode. You set yourself when the display will go out or darken, choose the time when the monitor will turn off and go out, determine the time after which the computer can go into sleep mode. Here you can adjust the brightness of your laptop display by dragging the slider located opposite the inscription “adjust the brightness of the plan”.
  • When everything is configured, press the “save changes” button

Done! Now your PC behaves the way you would like it to.

Why Windows 10 monitor turns off

Why? This is done in order to save power (save battery power in laptops).

I would not recommend you to neglect, or rather turn off this function completely. it is better to change the settings at your discretion.

By default (if you haven’t changed anything on your Windows 10), the screen turns off after 5 minutes, from the battery after two.

How to customize Windows 10 screen timeout

In the Windows 10 operating system, the waiting period before the monitor turns off to save power is usually 10 minutes. In addition, when the monitor is turned off, the computer is locked. Further work is possible only after entering the password for the username used. And if on PCs used as workplaces in large companies and in production this is a forced measure caused by security requirements, then on ordinary home computers this is not necessary. over, this mechanism becomes very inconvenient: I went to the kitchen for coffee and the operating system was locked. To debug power saving for yourself and adjust the time to turn off the Windows 10 screen, you need to open the power options. To do this, press the WinR key combination and write the powercfg.cpl command. Like this:

You should see a window like this, from which you can configure the computer’s power plans:

The power supply system that is currently used by Windows 10 will be highlighted in bold. To enter its configuration, you need to click on the link “Setting the power scheme”.

In the next window, the parameters for putting the display into sleep mode are displayed separately. The line “Disable display” will contain the timeout that is currently used in the circuit. To adjust the time to turn off the Windows screen. just click on the down arrow and a drop-down list with all possible values ​​will appear. You can set it for half an hour, an hour, or even disable this function altogether to remove the display off altogether. Do not forget to click the “Save Changes” button to apply the selected timeout value.

Windows 10, display off, lock screen

Changing the Windows 10 lock screen timeout

In order to set the desired interval for the lock screen before turning it off, you need to do the following:

Right-click (long tap on the tablet) on the start button and select “Run” in the menu that appears

In the window that opens, type regedit and click on the “OK” button

In the registry editor that you launched in step 2, go to the following path:

on the right side of the screen, double-click on “Attributes” and change the value of this parameter from 1 to 2.

Right-click (long tap on the tablet) on the start button and select “Control Panel” in the menu that appears

In the control panel, select the “Power supply” section

Click on “Configure Power Scheme” opposite the power scheme activated on your device and select “Change advanced power settings”.

In the window that opens, find and open the “Screen” branch

Here you will see a new parameter “Wait until the lock screen turns off”, which we activated in paragraphs 1. 5 of this instruction, and which is responsible for the time the lock screen is active

Set the value you need in cases when your device is powered from the mains and from the battery and click on the “Apply” button

Now you can check how the new installation works. To do this, press “Win” L on your computer and laptop or. twice on the tablet lock button to get to the lock screen.

How to find and fix the cause of Windows 10 Start menu problems

How to display the screen of an Android device on the display of a Windows 10 PC, laptop or tablet

How to enable automatic screen brightness adjustment on Windows 10 tablet or laptop

Where does Windows 10 store lock screen wallpapers and how to set them as desktop wallpaper

The screen does not turn off when talking iPhone 5s

Focusing on the above reasons why the screen does not go out when the iPhone is talking, it remains only to sort out the options, taking into account the most frequent calls from the owners.

As for the 5th generation iPhones, including the S and SE, most often the problem lies in the cases. Today you can find absolutely any “exclusive” cover for the top five. Often it is he who imposes on the above-described sensor, and he stops turning off the screen during a call.

Also, in the case of this model, it is worth checking the protective glass (if any). In view of the old age of the gadget, the market is flooded with accessories that were produced without observing Apple’s standards.

When installing a protective glass on the iPhone screen, you need to make sure that it will not cover the sensor

Does not turn off during talk mode on other models

If the proximity sensor is not working correctly on the iPhone XR, X, XS, 8, 8 Plus, you should make sure that there are no updates. For new iPhones, unlike the same fives, this is an important factor in the normal functioning of the entire filling.

Note! Due to recent user complaints about errors when updating gadgets to iOS 13, before starting the procedure, you should activate iCloud backup.

How to reset iPhone settings

What to do if iPhone does not lock screen when talking

If all of the above tips did not lead to success, and the screen does not go out on the iPhone during a conversation until now, then all that remains is to contact the service center. The great news is that specialists will replace the sensor itself without any problems if there is a breakdown. Or return the cable to its place if it disconnected during the fall.

If the user purchased an iPhone from an authorized retailer within a year or two, he is entitled to free service if the cause of the sensor breakdown falls within the terms of the warranty case.

According to the law, in Russia the warranty for iPhones is 2 years

Why iPhone screen won’t turn off during talk mode

If during a call the display reacts to touching it with your face or ear, then the gadget has a hardware or software malfunction with the proximity sensor. It is he who is responsible for turning off the screen. It can still be seen from a certain angle of illumination next to the earpiece.

READ  How to make the screen smaller on Samsung

Proximity sensor is next to the front camera and speaker

Reasons why iPhone screen does not lock during a call? some:

  • Proximity sensor covered with opaque glass, cover, sticker, fingers.
  • Moisture has entered and the sensor contacts are oxidized.
  • The software installation has failed.
  • The owner uses a speakerphone to hear better (in this mode, the screen should not turn off).
  • The screen is damaged after a fall, and the crack prevents the sensor from recognizing the proximity.
  • Dirt stuck to the lens.
  • Low battery.
  • The user has removed the anti-reflective coating that was installed by the manufacturer.
  • The repair service installed a non-original screen.
  • After the fall, the contact came off.

Also, the problem is often encountered with devices that were sent for repair to replace the screen. Most likely, the master simply forgot to connect it or did it incorrectly.

Note! Proximity sensor malfunction also prevents Siri from using voice assistant.

You can check the operation of the sensor during a call by creating an obstacle in front of its lens at a distance of a couple of centimeters

Screen does not turn off when iPhone is talking automatically

When the first touch-sensitive phones were developed, manufacturers saw one design feature. when you put your smartphone to your ear, a variety of functions are activated. The problem was solved simply, now a special sensor turns off the display. But from time to time, iPhone owners do not lock the screen during a conversation, which, of course, causes a lot of inconvenience. Why and what to do with it. below.

The screen does not turn off when the iPhone is talking. what to do

The first step is to check how the sensor works:

  • Call another subscriber.
  • Remove iPhone from ear.
  • Close the sensor with your finger.

If the screen does not go out, then the problem is really in the sensor. Here it is worth remembering another possible reason. incorrect auto-lock settings. Usually, the user does not need to look there, but if this is the work of malware, then it is worth downloading an antivirus.

To understand that the iPhone does not turn off during a call due to the settings, you need to:

  • Go to settings menu.
  • Select the section “Basic”.
  • Click on the section “Autoblock”.

Activate the slider if it is not enabled for some reason. After that, it is additionally worth rebooting and trying again to check the screen lock during a call.

The screen does not go out when talking iPhone 7

Starting with iPhone 7 and 7 Plus, the user can diagnose sensor failure on their own:

  • Go to the settings menu.
  • To the “System” section.
  • Item “About phone”.
  • Followed by “Support”.
  • Click “Agree”, “Agree” or “Accept” (means that the user has accepted the privacy policy).
  • Scroll to the end of the new menu and select “Test” or “Test”.
  • Click on “Start”.

After that, following the prompts of the system, make sure that the sensor is faulty.

If buttons are pressed while talking on the iPhone, how to fix the situation is worth mentioning the forced restart. On iPhone 7, it runs like this:

  • Hold down the power off button.
  • Simultaneously hold down the “volume” “-“.
  • Wait for the characteristic vibration and the appearance of the Apple logo on the screen.

But in truth, this method rarely helps.

Enabling, disabling and self-configuring the proximity sensor on iPhone

Given that the module is quite sensitive, Apple engineers left several ways to disable the proximity sensor on the iPhone. There are three options:

  • Use the Smart Screen Off application (available in the App Store), which, although it does not turn off the sensor, will help to set it up if everything is not hopeless.
  • Bring up the call menu and enter “# # #”. This code programs IOS to turn off the sensor.
  • And the last, most radical option, to remove the module from the filling.

The last two options should be used if the sensor is “buggy” and blocks the screen when it is not needed.

When iPhone is held to your ear, the screen should go blank. To do this, a special sensor is sewn near the front camera, which should block the display from accidental presses during a call. If this does not happen, the user should use a forced reboot, install updates and check if dirt or an accessory is blocking the lens of the module.

Turn off the screen automatically when you bring the phone to your ear during a call

Why doesn’t the screen go blank on the phone when I put it to my ear? In this article, you will find information on how to enable the screen lock during conversation in the Xiaomi settings. If on your Xiaomi smartphone with an incoming or outgoing call, the screen stopped dimming and locked when you bring the phone to your ear, then you may have disabled this function in the Android settings. This could have happened completely by accident and you simply did not notice, or your children went through the phone settings and turned off the proximity sensor.

In our example, we will show how to turn on the proximity sensor on Xiaomi Redmi 4X so that when you bring the phone to your ear, the screen is locked and turned off. Perhaps the information will apply to other Android smartphones and tablets.

To automatically lock the screen on Android when you bring it to your ear, you need to do the following. We open the “phone” icon on Xiaomi and get to where we usually dial the number to call. Next, click on the touch button “menu” in the form of three horizontal stripes. (On some Androids, after opening the “phone”, the “menu” can also be opened with a touch button in the form of three strips located under the screen on the left side. This button must be pressed and held a little to bring up the menu.) Look below at the attached pictures, where the necessary ones are highlighted. icons and buttons.

Next, in the menu window that opens on Xiaomi, select the item “Incoming calls” under which there will be a short description of possible settings (additional settings for the behavior of the device for incoming calls).

In the “Incoming Calls” settings on Xiaomi, we find and select the item “Proximity Sensor” under which it will be written (turn off the screen automatically when you bring the phone to your ear during a conversation) and turn it on. Done, now when you bring the phone to your ear, the screen turns off and locks, thereby preventing accidental presses and touches of the touch screen.

How to set up a screen lock during a call?

To turn on the screen lock during a call, you have to perform a few basic steps:

  • go to the call settings menu;
  • go to the section of incoming calls;
  • find in the section that opens the item with the mention of the proximity sensor;
  • move the slider next to it to the “on” position.

It is important to emphasize that you can disable the function in almost the same way, using the instructions above. The only difference is in the position of the slider: it will have to be moved to the “off” position.

To what has been said, it is required to add that the described method is suitable for almost all phones with the Android system, and the differences concern only the path to the desired item in the settings menu.

How to lock your phone screen during a call?

If the program works, and the screen is not blocked during calls, you will have to move on to more serious actions. Huawei and Honor owners should:

  • restart the smartphone in order to exclude a possible system failure (it was said above that the probability of failure is small, but of all the available methods of dealing with problems, the restart stands out for its simplicity and availability);
  • download a special application for sensor calibration;
  • contact the service center if the previous actions did not help achieve the desired result.

There are no other ways to cope with difficulties, so users will have to choose from the listed items.

The screen does not lock during a call: reasons

There are only 3 reasons that prevent the screen from locking on Honor and Huawei during calls:

  • disabling the function in the settings menu (usually it is in an active state, and only the owner of the smartphone can disable the service);
  • incorrectly calibrated proximity sensor, which ceased to recognize the appearance of foreign objects, face, hands next to it;
  • broken or completely stopped working sensor.

Sometimes a banal Android malfunction leads to the appearance of a problem, but this rarely happens, so the first thing to do is to check the phone settings. The likelihood of a service outage is much higher than an unexpected smartphone system crash.

Why the screen does not lock when talking to Huawei and Honor: reasons and what to do?

The screen is not blocked during a conversation. such a nuisance can make a conversation extremely uncomfortable, since a person has to think about not touching the smartphone with his ear or cheek. Any touch in such a situation can make a second call, send a message or launch an application. And a simple set of numbers also causes negative feelings. At the same time, manufacturers of Android phones have taken care of a special function that locks the screen when brought to the face during a call. If the display does not go out, users should look for the problem and check the current phone settings in order to restore the operation of such an important and useful mobile service.

Application to lock the screen during a call

    There are many applications that enable the screen to be locked during a call, such as Smart Screen On or Proximity sensor. To use them to calibrate the sensor, you will need:

    • download the program and run it;
    • enter the Calibrate Sensor section;
    • close the sensor with your finger following the prompts on the screen;
    • click next;
    • remove your hand from the sensor and press “next” again;
    • start the process of setting up the sensor and save the obtained result.

    It is important to emphasize that the actual calibration process may differ from the one described, since different applications have their own characteristics and distinctive features. In addition, some of the services require root rights to make changes to the phone.

    Why the screen does not lock when talking on Honor and Huawei: reasons and what to do?

    Does the screen not lock during a conversation? Such a minor malfunction can cause many problems and make a normal telephone conversation extremely inconvenient. Therefore, Huawei or Honor owners should think in advance about the correct setting of the smartphone and set the appropriate operating parameters in a timely manner. Usually, such actions are enough to get rid of unexpected involuntary pressing of the cheek on the screen during a call and the subsequent activation of various functions and applications. But sometimes it is impossible to cope with the difficulties that have arisen by simply changing the settings. In such difficult situations, you will have to use more complex solutions.

    How to set up a screen lock during a call?

    You cannot set up a screen lock during a call. An Honor or Huawei owner should take care of this in advance. For this you will need:

    • enter the “calls” menu;
    • open the settings section;
    • switch to a subsection mentioning incoming calls;
    • find an item in it that suggests using the proximity sensor;
    • activate it by moving the slider next to the inscription to the “on” position.

    After that, it remains to check the result. You need to ask a friend or loved one to make a call to conduct a small experiment. After that, it remains to answer and bring the phone to your face, perhaps the display will turn off, and problems will remain in the past.

    READ  How to move the screen to the left on the monitor

    How to lock your phone screen during a call?

    If the described actions do not help to restore the shutdown of the display, which still does not go out, it is recommended:

    • restart your smartphone to exclude a possible system failure;
    • go to sensor calibration.

    Smartphones do not include a built-in calibration function to prevent users from affecting the sensor’s performance and accidentally damaging it. Therefore, to cope with the task, you need to download a special application for Android.

    The screen does not lock during a call: reasons

    To understand the causes of problems, you should find out what helps the screen to lock when brought to your ear. Especially for this, a proximity sensor is built into the smartphone. It detects the appearance of a cheek or ear next to the phone during a call and turns off the display. If nothing like this happens, then:

    • the user simply did not turn on the blocking function on their Android;
    • the sensor has lost calibration;
    • the smartphone has an unexpected failure;
    • the sensor is broken and needs to be replaced.

    The solution in each case depends on how serious the problem turned out to be. But it is recommended to start with the simplest one in order to save time if the assumption turns out to be correct.

    Application to lock the screen during a call

    When the application is downloaded, installed and enabled, it remains:

    • press the center button of the program on the screen;
    • check if the sensor is working by using the appropriate function and holding your finger to the sensor;
    • the second stage is the activation setting, which requires you to bring your finger to the sensor at a distance of 2-3 centimeters and, after waiting for the green button to light up, press further;
    • the third stage allows you to check if the sensor turns off at the right time;
    • the last step is extremely simple and requires you to save the result.

    If the screen lock during a call did not start working even after calibration, or the application confirms a breakdown, you will have to send your smartphone for repair.

    If you have any questions or complaints. let us know

    Disabling a module

    If you are, on the contrary, wondering: “How to disable the proximity sensor on the iPhone”, then you can use one of the following methods:

    • Download Smart Screen Off app. The program allows you to calibrate, adjust the moments of switching on and off.
    • Dial the combination “# # #”. a software shutdown method, wired by engineers into the bowels of the iOs operating system.
    • Disassembling a smartphone and removing the proximity sensor is perhaps the most radical way.

    Removing pollution

    The cause of the problem we are considering may be the notorious dust that gets inside the device when the tightness is broken. In order to wipe the phone from the inside, you will need to disassemble the case, and gently, without pressure, wipe the circuits and the case from visible debris.

    A small piece of scotch tape

    Most often, the proximity sensor in a smartphone loses its functionality after replacing the touchscreen. In order to solve this problem, it is enough to glue a small piece of scotch tape in this place and paint over with a dark marker, preferably black. This method has been tried many times and has always been effective.

    Instead of tape, you can use a rubber band. Cut a piece about 5 mm long and place it between the light and distance mechanisms. This method, as noted by experts and ordinary people, also helps to solve the problem when the function of turning off the display on the iPhone does not work as it should, when approaching in an opaque object.

    Of course, in order for the distance sensor to be available for repair, the device will have to be disassembled, at least remove the display module. There are a lot of instructions on how to do this for owners of iPhone of different models on the Internet. To get started, check out so as not to break wood and spoil a valuable spare part. The screens are very fragile and, if removed incorrectly, turn into a pile of glass shards.

    As a rule, the distance sensor after replacing the display does not work if the procedure was carried out by people who are not familiar with all the intricacies of opening and repairing the iPhone 5 and other Apple products. Therefore, to replace the display on the iPhone, it is best to contact real professionals in their field, specialists in whom you are 100% sure, preferably to an official service center.

    In addition, only there you will receive a guarantee for work and spare parts several months long, in contrast to private servicemen who limit warranty obligations to 2-3 weeks.

    Phone recovery

    If it’s not about replacing the touchscreen and a dark protective film or glass, then the sensor may not work due to failures in the operating system. Therefore, before going to the official service center in order to fix the iPhone 5 or any other gadget from Apple, we try to reboot. It is very simple to do this. look at the picture and press the marked buttons.

    In order to reset all software errors, you need to format the phone. This can be done using iTunes. How exactly the procedure is performed, read and see here in this article.

    The iPhone screen does not block and does not go out during a conversation, causes and remedies.

    The proximity sensor in smartphones, including the iPhone, performs such a function as dimming the screen during a call. The function is activated at the moment when it comes into contact with something opaque. When a person makes or answers a call, that something is the ear. Today we will talk about why the screen does not turn off when talking on the phone and what you can do in this case on your own, without the help of a specialist, including how to check the proximity sensor.

    Transparent protective film or glass

    In addition to replacing the touchscreen, a situation where the proximity sensor of the iPhone does not work can be caused by a protective film or glass. precisely, its dark shade. Due to the shading, the distance sensor, although fully functional, will not be triggered. The solution to this problem is to remove the protective film or glass and replace it with another transparent one, which is quite logical.

    There are a huge number of such accessories on the market now, so there should be no problems with choosing the right one. The main thing to remember is to take only a transparent protective glass.!

    It should be noted that if you put on a protective film or glass of a dark shade on your iPhone for a long time and before that there were no such problems, then most likely the sensor on the phone has failed for another reason. In this case, it is strongly recommended to contact the wizard.

    Repairing the loop

    The situation when the screen does not go out, in addition to everything that was mentioned above, can be caused by the breakdown of a penny spare part called a “loop”. It is not difficult to fix it, but skill and experience are needed. This process can be divided into the following stages:

    • Disassemble iPhone, remove or disconnect battery.
    • Pull out the speaker and the connector that serves to fix the headset.
    • Expand the key called “Home” into parts, sequentially unscrewing the screws.
    • If there are traces of corrosion on the parts that come into contact with the train, then we carefully clean this place. For this, a cotton swab dipped in an alcohol solution is suitable.
    • Install parts back.
    • Turn on iPhone and check the proximity sensor. works or not.

    Remember that the train is very fragile and can be damaged by just one careless movement. Therefore, if you decide to fix it yourself, then do it carefully, without using sharp and cutting objects.

    Now you know what to do if the screen does not turn off when the iPhone 5S talks. The warranty for the iPhone, regardless of the model, is not 1, as many people think, but 2 years. Therefore, if this time has not yet expired, then it is best not to engage in amateur performances, but to seek help from an official service center. They will fix the problem quickly and free of charge. If the module did not fail as a result of drowning or falling of the device.

    And finally. You should not buy an iPhone hand-held, as in this case, the cell phone may be a Chinese product assembled from used parts, even if there is documentation confirming the quality. Be careful and careful how to authenticate iphone, read the next article. That’s all, until we meet again on the pages of the site.!

    Table of Contents

    | Contacts | Content | RSS