How to make Wi-Fi on Samsung

Table of Contents

How to set up Wi-Fi on a Windows 7 laptop

Depending on the operating system that is installed on your laptop, there may be different problems with establishing a wireless connection. And it often happens that the laptop does not connect to WI-FI in Windows 7.

Let’s consider several options for how to fix this problem.

To begin with, you have a wireless network available to connect, but the laptop won’t establish a connection. Find in the Taskbar, located in the lower right corner, the icon denoting the network, and click on it with the left button of the manipulator. A menu will appear in front of you, in which all available wireless networks will be displayed. From the list provided, select the network to which you want to connect at the moment.

After selecting the network, a window for entering the password will appear. After filling in the field, the connection process will begin, which may take 1-2 minutes. If everything is correct, then a wireless connection will be established, and you will be able to use the Internet on your laptop without any problems.

Another option that will enable Wi-Fi on a laptop will be of interest to more advanced users, since it involves more actions. But with its help, it becomes possible to manually fill in some data that relate to the connection.

To use this option, you should go to the Network Settings section located in the Control Panel, and then go to the settings of the new Internet connection. After the dialog menu opens, you need to select the manual configuration option. Further, in a new window, you will be able to assign a name to the access point, select the type of security, type of encryption and assign a new password for the connection. When all the required fields are filled in and the settings are saved, the newly created network will appear in the list of available ones, and you can connect to it.

How to turn on Wi-Fi on a laptop

Without the Internet, any laptop today is nothing more than a typewriter or a large calculator. Fortunately, every modern device is equipped with a built-in Wi-Fi adapter for high-speed Internet access. But what if, having bought a new laptop, you cannot connect to the router and take advantage of all the delights of the Internet? You need to understand the system settings and create a connection yourself. Consider the most common ways to connect a laptop to a router, methods of changing network parameters in Windows 7 and 10 operating systems.

Wi-Fi activation using buttons

Some laptop computers equipped with connection adapters are not capable of connecting to wireless networks after activating the device. How do I turn on Wi-Fi on my laptop? In such cases, one or more buttons located on the laptop will help. There may be several options, and they directly depend on the model of your laptop, as well as the date of its release. On older models, the inclusion of the WI-FI module is presented in the form of a separate toggle switch or a separate button. Such a switch can be located both on the front and on the side of the case, so you need to carefully examine your laptop for such a button.

If, during the search, the button for activating the wireless connection could not be found, you should look for the button in a number of function keys. They are located at the top of the keyboard and are usually labeled F1 through F12. Among these buttons, you need to find exactly the one that is responsible for activating the transmitter. Most often, it is marked with the Wi-Fi icon in the form of a transmitting antenna.

Many manufacturers have tried to unify this function, so you can turn on Wi-Fi on your laptop by simply pressing the Fn F5 combination. Try it and chances are you will be lucky.

How to turn on WI-FI on an Asus laptop

If you have an older Asus laptop, it may be equipped with a conventional mechanical switch that activates the Wi-Fi module on the device. Therefore, simply slide this switch to the “on” position. If you have a newer model, you can enable the ability to search for wireless connections with a combination of buttons. Again, depending on the laptop model, the power button may be different. The main thing is that you need to look for it in the row of service buttons at the top of the keyboard. Such a button will be indicated by a working antenna transmitting a signal. It could be F2 or F10. These buttons should be used in conjunction with the Fn key.

Installing Wi-Fi Drivers

It so happens that after reinstalling the operating system and trying to activate the Wi-Fi module using the buttons, nothing happens, and there is no trace of connection. How, then, turn on WI-FI on a laptop? It is likely that the problem lies in the drivers for the module. During the installation and configuration of the operating system, it was not possible to select and correctly install a new driver.

First, you need to determine whether the device required for the remote connection is installed on the laptop. For this you need:

  • Access the Device Manager by going to the properties of My Computer;
  • Select the Network adapters tab;
  • Find a device in it, the name of which will reflect the essence of the wireless connection. It can be an adapter with the word Wireless or something similar.

If you visually find the adapter, and it does not display with errors, it looks like the drivers are fine, it’s just turned off, or there are currently no networks to connect to.

If the adapter is not listed or is displayed with errors, it all boils down to the fact that the driver is not installed on it, or is not installed correctly. In both cases, it is not possible to establish a high-quality Internet connection. To connect Wi-Fi on a laptop, you need to install a driver. You can always find it on the disk that came with the device, or unload it from the manufacturer’s official website, transfer the driver using a USB flash drive, and then install it.

If you are looking for a driver on the Internet, it is important to note that you need to specify the exact name of your laptop in order to download the exact file that you need. Enter all letters, numbers and symbols that appear in the title.

After installing the drivers, try connecting to a wireless network. If it does not work, restart the router. most likely the problem lies in it.

How to turn on Wi-Fi on an HP laptop

Although the activation of the wireless adapter is the same on most laptops, many users wonder how to enable WI-FI on an HP laptop. Most of the devices of this American manufacturer are equipped with a special button that activates the Wi-Fi module. In some models, it is presented as a special slider, and is additionally equipped with an indicator that lights up when Wi-Fi is on. If there is no such slider, the button should be found in the row of function keys on the keyboard. most often next to the F12 button. It is indicated by the logo of the antenna transmitting the signal.

In other cases, Hewlett-Packard notebook computers enable the wireless module by software or hardware, as described above.

How to turn on Wi-Fi on an Acer laptop

If you own a laptop of the Acer brand, and for some reason, Wi-Fi does not work, do not despair. Most likely, it is just deactivated and you need to know how to turn on Wi-Fi on your Acer laptop. As in most cases with other manufacturers, the acer has its own magic combination on the keyboard, which activates the Wi-Fi adapter and allows you to connect to wireless networks without any problems. So, just hold down the Fn F3 buttons, and you get working Wi-Fi on your laptop.

How to enable hotspot on Samsung

How to Share Wi-Fi on Samsung? This question is relevant among the owners of Galaxy devices on Android OS. It is often necessary to connect third-party devices to the Internet, including a tablet, laptop or desktop computer.

How to share Internet on Samsung?

Android mobile devices support hotspot mode. They can be used as a modem to connect other equipment to the Internet. At the same time, you can fully enjoy access to the network on the smartphone itself, however, the connection speed will drop.

Android OS devices support several modem modes:

  • Wirelessly.
  • Via USB cable.
  • Via bluetooth.

Wi-Fi mode is usually used as it is the most convenient for users. How to make a wireless network on your phone? Instructions for owners of Samsung devices:

  • Open the settings.
  • Go to the “Connections” section.
  • Select the item “Access point and modem”.
  • Turn on mobile hotspot.

This is a simple instruction on how to share Wi-Fi on Samsung. Usually the phone sets the network name and password on its own. In the “Mobile hotspot” section, you can view these parameters, change them if necessary.

Your smartphone has become a wireless modem. Now open the section for connecting to Wi-Fi on other devices, find the network and enter the password. Encryption is recommended to prevent third-party users from connecting to Wi-Fi and intercepting data.

Sharing Wi-Fi from a smartphone

Before setting up an access point on a smartphone, there are several factors to consider:

make, wi-fi, samsung
  • The networks of the mobile operator will be used to access the Internet. Check the rest of the traffic on your tariff and use it sparingly.
  • Some operators block Wi-Fi distribution.
  • Additionally, they can cut the speed, offer full access for a fee. This policy is adhered to by Yota.
  • When using a smartphone in modem mode, the power consumption of the device increases significantly.
  • Overheating of the device may occur due to the active use of the mobile communication module and the rapid discharge of the battery. A similar problem is relevant in the summer, when working with a smartphone on the street.
  • Computers and laptops consume more bandwidth.
READ  I can't hear the interlocutor on my Samsung phone

Hey! Today I will show you how to turn on the tethering on your Samsung Galaxy phone. You can very easily and quickly connect the tethering mode on your Samsung Galaxy. Your smartphone will be able to distribute the Internet to another phone, tablet or laptop. See the instructions below and write Комментарии и мнения владельцев if you have questions. Go!)

On the main screen, find the Settings button and click on it.

In the settings, click on the Connections tab.

Next, click here on the Mobile Hotspot & Tethering tab.

Next, here you need to enable mobile hotspot. Opposite the name, click on the switch. Please note that you can also connect Bluetooth and USB modem here.

If you have Wi-Fi enabled on your smartphone, you need to turn it off. Click Yes.

All is ready. You have turned on the modem. Now click on the parameter name.

On this page, below you will be shown instructions on how to connect the Internet from your phone-modem. Everything is very simple. Your network name and password will be shown here. You will need to select this network when connecting and enter a password. After which the Internet will be available.

For those who are interested in additional settings. They are optional. At the top right, click on the Properties button (three dots).

In the window that opens, click on the Mobile Hotspot Settings tab.

  • Change the name of the network;
  • Hide device;
  • Change the security type;
  • Change Password;
  • View additional parameters.

Still have questions? Write a comment! Good luck!

Owning the latest Galaxy S9 and Galaxy S9 Plus gives owners a sense of pride. One of the great features of the new phones is the mobile hotspot feature. Samsung Galaxy S9 and Galaxy S9 Plus hotspot feature gives your mobile device the ability to become a Wi-Fi transmitter for nearby devices by providing password protected W-Fi.

Owners can enjoy wireless Internet access on many devices on the go, so it’s important to know how to use the Galaxy S9 and Galaxy S9 Plus as a mobile hotspot. While older phones had poor performance for this feature, the latest Galaxy S9 and Galaxy S9 Plus have improved significantly.

Newer phones have batteries that can give you great battery life, allowing users to work and stay connected while they travel. To use this feature, you need to know how to turn on the hotspot and set a password for the new Wi-Fi hotspot. Here’s a simple guide you can do to create a hotspot on your Samsung Galaxy S9 and Galaxy S9 Plus.

  • Turn on the device
  • Scroll down from the top of the screen to go to the notification screen.
  • Select the gear icon in the upper right corner with settings
  • Find the menu that appears to connect the modem and Wi-Fi Hotspot
  • Click on it and then click on the mobile hotspot
  • Toggle the On / Off switch. To the “On” position
  • Press “OK” on the screen, which informs you that the mobile hotspot will be turned on
  • Follow the instructions at the bottom of the screen so you can connect another device

How to change the password and security type for a wireless hotspot

Now is the time to add a WPA-2 password to your Samsung Galaxy S9 and Galaxy S9 Plus hotspot that you just created so that no one else can access your Wi-Fi. Follow these steps.

  • Turn on your Galaxy S9
  • Scroll down at the top of the screen
  • Select the settings icon in the upper right corner of the notification screen.
  • In this menu, select “Browse” for “Modem” and “Hotspot” mode and click on it.
  • Select a mobile hotspot
  • Tap ha three dots to view additional options in this menu.
  • Choose a configuration
  • Change the password in the password option
  • Your password has been changed

How to make a Wi-Fi hotspot from Samsung Galaxy. Samsung Galaxy how to share WI-FI. How to change the password and WI-FI name on the phone.

Smartphones Samsung Galaxy is able to distribute the Internet simultaneously to several devices, phone, computer, laptop, tablet and others. The more devices connected to your smartphone, the lower the speed on other devices, as the speed is shared among all devices. You can connect your laptop or computer to the internet from your phone wirelessly via the WI-FI hotspot on your phone.

Now let’s see how to make a WI-FI access point from Samsung Galaxy and distribute the Internet to another phone or other devices. 1) Open “Settings” on Samsung Galaxy and select “Modem and access point”. See the screenshot below, in it I highlighted this item in the settings.

2) Next, in a new window, we find the item “Mobile hotspot”. Look at the picture below.

3) Then we see the menu as in the picture below, in it I also highlighted the place where you need to turn on the Wi-Fi hotspot on the phone.

You can also set up a Wi-Fi hotspot on Samsung Galaxy. To do this, click on three dots at the top of the screen on the right side, after which a menu should appear as in the screenshot attached below. Also in the screenshot you can see how the included WI-FI distributor should look like. It changed color from gray to light greenish.

In the menu that opens, we can configure the name and password of the WI-FI hotspot in Android. In the picture, I have highlighted these points. It is better not to touch anything besides the name and passwords. In the picture, the name of Wi-Fi is “AndroidAP”, if you do not change the search for an access point on the Samsung Galaxy, then you need to look for Wi-Fi under this name, if changed, then the one you specified. After you have found WI-FI to access it, enter the password you specified. If you want to see the password, turn on “Show password” in the settings.

Also, on some Samsung androids, you can turn on the wai wai access point through the quick menu. To do this, you need to pull the screen from top to bottom and you will see a panel with icons for quick access to various functions. Next, by sliding the panel to the left or right, you need to find the access point icon and activate it by touching it. Below in the picture I have highlighted this icon, you can also go directly to the settings of the access point and also change the password and name of the WI-FI distributor.

If you connected via Wi-Fi to Android, but there is no Internet, check if the Internet is activated on the Samsung Galaxy to which you connected via the WI-FI hotspot, if the Internet is not turned on, then there will be no Internet on the connected devices.

How to set up Wi-Fi on Samsung Galaxy

On the main or secondary screen, find the Settings icon and tap on it.

In the settings, click on the Connections tab.

Next, on this page, click on the Wi-Fi tab.

Next, you need to select a network and a list of available ones and click on it. A new network can be added.

In the window that opens, you need to enter the password for your network and click on the Connect button. The password should have been given to you when you connected the Internet at home. It must also be specified in the contract.

How to Connect Samsung Phone to Wi-Fi Galaxy

Hey! Today I will show you how to connect your Samsung Galaxy phone to Wi-Fi internet. If you have a Wi-Fi router at home or in your office, you can connect your Samsung Galaxy smartphone to it and use the Internet for free. Everything is very simple and fast. See the instructions below and write Комментарии и мнения владельцев if something is not clear to you. Go!

On the home screen, swipe down from the top edge of the display.

In the window that opens, find the Wi-Fi icon and click on it to connect the phone to the already existing network that you added.

To connect to another network, click on the name of the network or just the inscriptions under the icon.

Next, you will be shown a list of available networks. Click on the title.

Still have questions? Write a comment! Good luck!

If there is no Wi-Fi router at home then you cannot configure it on the phone?

What to set up? Without Wi-Fi, you will not be able to connect the Internet to your phone. If only mobile internet.

Good afternoon. Until now, my Samsung S3 phone was automatically connected to wi-fi but after the modem rebooted, the phone does not connect in the network list, it says that my network is out of range, how and what to do, I no longer know

Kind, the computer or laptop does not connect either?

We only have a computer, nothing else

And what to do if, when you click on the network, a window does not pop up asking you to enter the password?

Does nothing happen at all when you click on any network? Is Wi-Fi on? Try restarting your smartphone.

Please help me connect to Wi-Fi. I do everything according to your links, it turns out that it is connected without Internet access

Is your router configured, turned on? Are you exactly entering the connection data? When the router is connected, according to the instructions, you need to go to the manufacturer’s website, to your personal account. There, data for connecting Wi-Fi is provided. Do you connect at home or somewhere else?

Hello, please tell me what to do? The tower is 100 m. The signal is 4g, but during the day the Internet is good and in the evening when everyone comes home from work and connects it disappears to zero. I wanted to take a router, but in the mts salon they said that it would not help. what is your opinion?

Hello. Mobile internet or cable?

Good afternoon, my question is Wi-Fi internet at home, my daughter hasn’t used her phone for a while. Yesterday we tried to connect to the Internet, but it didn’t work Samsung Galaxy J mini phone. We turn on Wi-Fi in the phone, it shows a bunch of networks available, besides ours. I enter manually. the name of the network and the password, nothing happens…. And in the afternoon, my daughter called me at work and said that the laptop also did not connect to the Internet. But I haven’t looked at the computer yet. And my iPhone sees everything without problems, when I come home, it automatically connects. Can you tell me what it might be? And how can this be fixed?

Hello. First, try restarting your smartphone and router. This phone is old, most likely it’s the Wi-Fi settings. Settings. Connections. Mobile networks. Network mode, what is displayed there? Must be LTE / 3G / 2G (auto). If there is only 2G and 3G, set 3.

READ  How to update Samsung Galaxy Ji

How to Share Wi-Fi on Samsung

How to Share Wi-Fi on Samsung? This question is relevant among the owners of Galaxy devices on Android OS. It is often necessary to connect third-party devices to the Internet, including a tablet, laptop or desktop computer.

How to share Internet on Samsung?

Android mobile devices support hotspot mode. They can be used as a modem to connect other equipment to the Internet. At the same time, you can fully enjoy access to the network on the smartphone itself, however, the connection speed will drop.

Android OS devices support several modem modes:

  • Wirelessly.
  • Via USB cable.
  • Via bluetooth.

Wi-Fi mode is usually used as it is the most convenient for users. How to make a wireless network on your phone? Instructions for owners of Samsung devices:

  • Open the settings.
  • Go to the “Connections” section.
  • Select the item “Access point and modem”.
  • Turn on mobile hotspot.

This is a simple instruction on how to share Wi-Fi on Samsung. Usually the phone sets the network name and password on its own. In the “Mobile hotspot” section, you can view these parameters, change them if necessary.

Your smartphone has become a wireless modem. Now open the section for connecting to Wi-Fi on other devices, find the network and enter the password. Encryption is recommended to prevent third-party users from connecting to Wi-Fi and intercepting data.

Sharing Wi-Fi from a smartphone

Before setting up an access point on a smartphone, there are several factors to consider:

  • The networks of the mobile operator will be used to access the Internet. Check the rest of the traffic on your tariff and use it sparingly.
  • Some operators block Wi-Fi distribution.
  • Additionally, they can cut the speed, offer full access for a fee. This policy is adhered to by Yota.
  • When using a smartphone in modem mode, the power consumption of the device increases significantly.
  • Overheating of the device may occur due to the active use of the mobile communication module and the rapid discharge of the battery. A similar problem is relevant in the summer, when working with a smartphone on the street.
  • Computers and laptops consume more bandwidth.

How To Fix Any WIFI, Data, or Bluetooth Connection Problems on Samsung Galaxy Phones in 1 Min

How to find out if the WI-FI driver is installed on a Samsung laptop

You can find out in two ways. The first is to open the device manager and look in the section: “network adapters”.

Wi-Fi is listed under the name Wireless or Wlan, although other options are not excluded.

If this is not there, then most likely it will be like an unknown device with a yellow exclamation mark.

You can also open the Network and Sharing Center, click on the left side. “change adapter settings” and see if there is an adapter with the name: “wireless network connection”.

If you have it, it is only displayed in gray, and not green as in the picture below, then you need to enable the WI-FI adapter by clicking on it with the right mouse and clicking the line. enable.

If everything is as in the figure below and WI-FI does not work, then go to the direct inclusion.

How to turn on Wi-Fi on a Samsung laptop

Before trying to turn on WI-FI on a Samsung r528, rv511, r519, r428, r530, ​​r535, r425, r60, r540, rv515, rc530, rv513, rv508 laptop and so on, as well as on a netbook, you definitely need to find out if driver. no way without it.

Please note that the WI-FI driver must be exactly for your Samsung laptop model.

If it is not there, it is described below how to determine, then follow this link, download, install and reboot.

If not, then after installation, WI-FI usually does not need to be turned on separately, although anything can be.

Therefore, below I will describe all the possible options that may arise on a Samsung laptop and netbook.

Enabling Wi-Fi on a Samsung laptop with buttons and keys

Samsung laptop manufacturers very often provide digits on the sides or front, as well as on the panel itself.

As for the keys, then you need to look with the antenna pattern and press this key while holding Fn.

It can be fnf2, fnf5, fn12, although other combinations are not excluded, it all depends on your Samsung model.

I hope you find and enable WI-FI on your Samsung laptop or netbook (if not, write in the Комментарии и мнения владельцев).

Then you will be able to use public networks, although in the former scoop they are not up to par. Success.

What to look for?

Before making a Wi-Fi hotspot on an Android smartphone, there are a few things to keep in mind:

  • Battery consumption increases significantly and you should keep the phone on charge during constant operation;
  • The data transfer rate decreases simultaneously with the increase in the number of connected devices;
  • The speed of distributing Wi-Fi from the phone cannot be compared with that provided by a stationary router.

Only those phone models that support GSM / 3G standards and Wi-Fi directly can create an access point. That is, it will not work on outdated devices.

Third Party Wi-Fi Sharing Apps

If desired, you can install third-party software. This can be useful if you cannot distribute the Internet using standard Android tools. Osmino, MyPublicWiFi or mHotspot can help you make your phone a Wi-Fi hotspot.

Such applications can function in the background, so they will not interfere with your smartphone.

Distribution by Android system tools

For instructions in video format, see here:

To share Wi-Fi on Android devices, follow the instructions below:

  • Open “Phone settings” and go to the “Network” (or “Wireless networks”).
  • Open the item “Modem and access point” (on some mobile devices “Modem mode”).
  • Go to “Configuring an access point”.
  • Perform settings. specify the name of the future network in Latin (so that the characters are displayed correctly on all devices).
  • Go to “Security” and check the WPA2 / PSK checkbox. This allows you to set a password to protect against third-party logins. Password must consist of eight characters (numbers or Latin letters).
  • You will be taken to the APN settings. After that, you need to activate the function of distributing the Internet.

If you go to “Modem mode”, you can track which devices are using the connection. In addition, the operating system can limit the data transfer rate. This is done like this:

  • Need to open “Bandwidth Usage”.
  • Activate a line to regulate it.

How to Connect to Wifi On ANY Samsung Galaxy Smartphone

After these steps, other mobile devices or PCs can connect to the smartphone. The parameters are configured once. they are saved in the system and in the future you only need to turn on the “Access Point” mode.

Problems with turning on and no internet

It is not always possible to make an Android smartphone a Wi-Fi hotspot the first time. An APN can be created and other devices will connect to it, however, you will not be able to enter the sites. The reasons for this are as follows:

  • antivirus software is blocking the connection;
  • the downloaded program or virus prevents the connection;
  • there is a system failure.

If the problem lies in the antivirus on the phone being distributed, you need to start it and disable the Firewall option in the settings. The connection should work fine. If not, you need to try to launch APN, after removing the antivirus program.

Any application on Android can affect the operation of the entire OS. It’s worth checking your phone. Some files may be malicious and should be blocked or deleted.

The last resort is to do a full factory reset. You need to open “Settings”, go to “General” and select “Reset and backup” (or “Restore factory settings”).

There is a button that allows you to return the phone to its original state. Before that, you should save all your files to backup, as they will be deleted in the process. This can be done in the same menu.

It is possible that the transmission of traffic over Wi-Fi is blocked by the mobile operator. If the APN setting is done correctly and possible errors have been eliminated, call the operator, requesting to check their settings and possible blocking.

How to make a Wi-Fi hotspot out of your phone: Hamster instructions

Smartphones running Android, Windows Phone, or iOS have one useful feature. With their help, you can connect other devices to the Internet. In other words, the phone becomes a kind of router, to the network of which you can safely connect. How to make a Wi-Fi network on your phone will be discussed below.

Translate all gadgets to 802.11N

When working with the “ancient” standards 802.11G or 802.11B, the ability of the network to quickly transfer information is reduced by up to 80%, so it’s time to switch to a more relevant one.

The standard is launched very simply:

  • in the Internet browser, you must write the ip-address of the gadget (indicated on the label);
  • enter username and password (factory or personal);
  • go to the menu and select “Basic settings”;
  • go to “Wireless mode” and select 802.11 N from the list.

It remains only to save the settings by clicking on “Change” and start testing the operation of the gadget in the updated standard.

A nuance: in devices from different manufacturers (for example, ASUS or Tenda), the settings may differ. details can be found in the instructions for use, which is supplied with the unit.

Setting the channel width 20 MHz

802.11N technology works with broadband by default to increase network throughput. But it should be borne in mind that this will be effective only with an excellent signal. Under standard Wi-Fi conditions, this is almost impossible to achieve. In addition, 40 MHz channels operating at 2.4 GHz can interfere with other gadgets that use this range.

And with a weak signal, a broadband channel has the opposite effect. the data transfer rate decreases, and noise appears. In devices like ASUS RT-AC66U, the use of such channels is the default, so you should change it manually.

In the additional Wi-Fi settings, you need to set the value 20MHz opposite the item “channel width”. Then click on “Save” and restart the device for the updated parameters to take effect.

How to increase the speed of the Internet through a Wi-Fi network of a router: 7 real ways

Routers are not just popular today: they are a must-have in every home and office. After all, users with them gain not only a stable connection with the World Wide Web. The main thing is that this connection is also of high quality, and ideally super-fast.!

But what if the provider provides a speed of 100 megabits per second, but via Wi-Fi it barely reaches 20-30 Mbit per second? It’s time to start using these far from superfluous megabits, and for this you need to figure out how to quickly and accurately increase the speed of WI-FI functioning on modern and not very models of routers.

WPA2-PSK security standard with AES encryption algorithm

You should not use the outdated WEP or WPA / TKIP: they can significantly “slow down” the speed of the wireless Internet. Even if you switch to 802.11N, but do not change this parameter, you will not be able to increase the speed on any router model. In addition, this standard provides a high degree of security by working in tandem with a block cipher algorithm called AES.

READ  How to make a black screen in tik tok

To change these parameters, you will need:

  • go to the device settings (how to do this is described above);
  • select “Advanced settings”;
  • go to the security section;
  • set: network authentication. WPA2-PSK, encryption. AES.

Click on the “Change” button at the bottom of the screen. Parameters take effect after restarting the device.

Improving the speed of the Internet through the Wi-Fi network of the router

Problems become obvious when a user watches, for example, a video in good quality and sees that the speed of information transfer via Wi-Fi only reaches the minimum 20-30 Mbit per second, while the tariff is designed for 100 Mbit or even more How to increase the speed of wireless Internet through a Wi-Fi router in this case?

To begin with, it is worth finding out 3 points:

  • Decide on the capabilities of the device itself. Budget devices with basic equipment provide average internet speed. In inexpensive units, the manufacturer can save on the chipset (1 core, minimum frequency), the amount of RAM, and antenna power. For home use and simple online work, this is quite enough. If you need to quickly download large files, play adventure games and shooters, you should think about purchasing a more expensive device (for example, TP-Link ARCHER-C5400X).
  • Look at the Wireless N label on the box. The numbers next to this inscription, for example 300, indicate the maximum achievable speed over Wi-Fi (if you use the latest 802.11N standard). If an older standard is used, then the indicators will be somewhere in 1.5-2 times less than the specified number.
  • Update the firmware. Before trying to increase the Wi-Fi speed by manipulating the settings, you need to update the device’s firmware to the newest one (it is also advisable to do this for Wi-Fi adapters). In addition, the compatibility of computer software can have a negative impact on speed. Therefore, you should visit the web portal of the developer company, download the latest version from there, go to the Windows “Device Manager” or adapter settings, make changes to the firmware.

What else do you need to check before setting up your unit? The number of connected gadgets to it. After all, the device has to “divide” the initial connection speed among all. To successfully solve this, you can use specialized powerline adapters that will help equip a wireless virtual network without “jumps” in the pace of work.

Another simple method to increase the speed of Wi-Fi operation several times is to use an interval of 5 gigahertz. Some routers support 2 bands: 2.4 and 5 GHz. Most often, Wi-Fi networks are operated on the first of the indicated frequencies. And it turns out that the more devices operate at 2.4 GHz, the worse the connection can be. Residents of apartment buildings should know this firsthand.

5 gigahertz is used less often, as a result, it has less interference and better connection quality. Nuance. for the operation of the specified frequency, a mobile or stationary device must support it (a good example is ASUS RT-AC66U / B1).

After everything is checked, you can start digging into the settings.

Enabling WI-FI MultiMedia (WMM)

After 802.11N is connected, in order for the Internet to reach record heights in speed, you need to activate WMM. This parameter goes in tandem with QoS (quality of service) and is well suited, for example, for streaming video.

WMM is connected in the Wi-Fi settings. For this you need:

  • go to “Wireless mode”;
  • click on “Advanced settings”;
  • click on On opposite the inscription WNN.

My samsung mobile wifi is not working connecting how to fix

WNN is also required to support a wireless PC adapter. You can connect through: Settings. Properties. Advanced.

How to connect Android to Wi-Fi

Many people think that setting up an iPhone is really not an easy task. Few would argue with this statement. But about Android, many believe that these are easy-to-use smartphones that even a child can handle. However, in fact, when trying to configure Wi-Fi, there may be some difficulties here.

In general, the popularity of Android is growing every day. Probably, there is no longer a person who does not have a smartphone or tablet with the Android operating system in the arsenal of home appliances. Even the smallest children today actively use these gadgets instead of the usual toys, dolls, cars, etc. But at the same time, few people know how to properly configure Wi-Fi.

It is worth connecting a smartphone once and in the future the smartphone will independently connect to Wi-Fi. But it is not uncommon to observe situations when you need to configure Android manually.

For a visual illustration, we will use the LG G4 smartphone with the version of the Android 5.1 operating system. However, the model doesn’t matter, Android smartphones are almost the same.

Before you start configuring Android, you need to set up Wi-Fi by turning on the adapter. The adapter can be turned on in two ways:

  • Through the toolbar.
  • Through device parameters.

The first method is very convenient: swipe your finger across the screen (from top to bottom) and see the toolbar, as in the figure:

We are looking for a Wi-Fi button with a corresponding icon. Click on it and thus activate the Wi-Fi model.

After that, the system starts searching for available wireless networks and the following list appears on the screen:

Choose the one you need and connect. If it is password protected, enter a combination of characters and click “Connect”. The whole process is automated and does not take much time.

Another question is if the connection is hidden in the parameters of the router or the DHCP function is disabled. Then you need to configure Android manually.

Most common problems when trying to connect an iOS phone to Wi-Fi

It often happens that it seems that they did the right thing and followed the instructions, but nevertheless it is impossible to connect the phone with the iOS operating system to Wi-Fi. Do not despair and think that the saying “Technique in the hands of a monkey is a piece of iron” about you. Most likely, this is not a technical glitch.

If you can’t connect your phone to Wi-Fi, do the following:

  • Check the router connection. And also make sure you are in range.
  • Check that the Wi-Fi option is enabled on your smartphone. Go to “Settings”, then to “Wi-Fi”. If there is a blue check mark next to the desired name, this means that the connection in the phone is complete and problems are observed in the router.
  • If you want to connect your phone to Wi-Fi at home, then check if the cables are connected correctly and if the router is configured correctly.
  • Reboot your iOS phone and set it up again.
  • Reboot the router and also reconfigure it.

If all else fails, try the following:

  • If you are trying to connect a smartphone in a public place, contact an employee of the establishment and ask him to set up Wi-Fi.
  • Check the connection on other devices, such as a laptop, or ask others if the Internet works for them. If the other devices are also not connected, then there is a problem with the Internet provider. Contact your internet provider.
  • Try connecting to a different location or Wi-Fi. If attempts are unsuccessful, contact a service center to check your iPhone.
  • Update the firmware version of the router and check that your smartphone is in the list of supported devices.

How to manually configure Wi-Fi on Android if the connection to the router is hidden

As with the first method, we first need to enable the adapter. But the methods listed above do not suit us for this. Change the strategy: first go to “Settings”. And then we act depending on the version of the phone. We find the item “Wi-Fi” and open its menu. We turn on the adapter. If you have an earlier model, then find the item “Wireless & networks” and select “Wi-Fi Settings”. We translate the adapter into the on position.

Next, we proceed to the manual search for available connections: you will be presented with a list of access points that were found automatically. If you are connecting to a hidden network, click “Add Wi-Fi”:

Enter the exact name of the hidden access point (SSID) and proceed to security, as in the illustration below:

IMPORTANT! The entered name must match the name specified in the router.

How to connect Wi-Fi on iPhone

IMPORTANT! Before setting up your phone, first check if you are within range of a particular wireless Wi-Fi connection. You can use home Wi-Fi, or you can connect your iPhone to free networks, for example, in cafes or shopping malls.

  • We go to the home screen and go to the “Settings” menu.
  • We are looking for the line “Wi-Fi” and enable the option.
  • Then it will automatically search for available Wi-Fi.
  • Choose a name and connect.

This method is suitable for connecting to unsecured routers, for example, in public places.

If you are connecting to secure Wi-Fi, the sequence will be slightly different:

  • Open the “Settings” menu.
  • We are looking for the line “Wi-Fi” and enable the option.
  • After automatic search for Wi-Fi, select the desired access point.
  • Enter the password and click “Connect”.

If you cannot connect your phone to Wi-Fi in this way, then you are entering the wrong password. To find out the correct one, contact your Wi-Fi administrator.

DO NOT FORGET! To connect your phone to secure Wi-Fi, you need to know the password, a “lock” icon is displayed next to such connections.

There are also situations when you need to connect your phone to a hidden access point that is not displayed in the general list. To connect a smartphone, you need to know the exact name of Wi-Fi:

  • Open the “Settings” menu.
  • We are looking for the line “Wi-Fi” and enable the option.
  • Press “Other” and enter the exact name.
  • Click “Security”.
  • After that, you need to select the type of protection, as shown in the illustration below.
  • We return to the “Other network” item and enter the password.
  • Click “Connect”.

How to manually set up Wi-Fi on Android. if DHCP function is disabled

In order to add a new connection to a router that has the DHCP function disabled, put a tick in the “Connect additional parameters” line. Then you will be able to independently enter the IP-address, proxy-server and other information. To enter an IP address and other information, select Static for IP Settings. We fill in the lines that appear with data about the router and start “Save” or “Ok”.

As you can see, special professional knowledge and skills are not required, the process is simple and straightforward. If you follow the instructions provided and do everything correctly, you will be able to set up your Android or iPhone in a matter of minutes. We hope this article helped you.

BICBON.COM 2021