How to open BIOS on Lenovo laptop

How to enter BIOS of Lenovo laptop: method 3

Around the same time that a new BIOS version called UEFI was released, the new Windows 8.1 operating system was released. And along with it, a new way of loading BIOS appeared. through the OS:

  • First you need to go to your desktop. Then we call the side menu of the Windows desktop. to do this, move the mouse cursor to the lower right corner of the desktop. Select “Settings”. “Change computer settings”;
  • Then go to the menu item “Update and recovery”, and then under the line “Special boot options” press the restart button;
  • After the reboot has been completed, we get to the screen with the ability to select an action. Click on the “Diagnostics” tile and then on “UEFI Firmware Settings”;
  • Confirm the selection by clicking on the “Restart” button. Done, the laptop entered the BIOS!

open, bios, lenovo, laptop

Entering BIOS on Lenovo Laptop: Method 2

Entering the BIOS on a Lenovo laptop is carried out in several ways. unfortunately, there is no single solution for how to get into the BIOS for everyone, but the ways to start it are quite simple. So, let’s move on to the first method.

The most popular solution is to use the keyboard. pressing several buttons at the same time on the laptop immediately after starting it up. Turn off your laptop (this method will not work with enabled), then press the power button and immediately one of the options:

  • F2 button or Del button;
  • Combination FnF2;
  • F1 key

If the BIOS was launched incorrectly, the computer will boot the OS normally. In this case, you will have to turn it off again and call the BIOS again, but using the new boot method. In order not to play the “guessing game” and start the BIOS faster, you can also look at the instructions for the Lenovo laptop.

How to enter BIOS of Lenovo laptop: method 1

Hardware manufacturer Lenovo has created its own software called Lenovo One Key Recovery, a system that includes the ability to back up and restore data to Lenovo PCs. In order to turn it on, there is an additional button on the laptop. Novo. It is found on almost all the latest laptop models from Lenovo and is located either on the side of the case or near the power button. Sometimes, in the most modern models, there is a small hole inside which there is a microswitch. In this case, you need to use a thin, non-sharp object. for example, a paper clip.

And despite the fact that the direct purpose of this button is not to call the BIOS, you can still get into the BIOS using it:

  • Turn off the device by holding down the power key for 10-15 seconds;
  • Hold the Novo key for 2-3 seconds and release;
  • Your laptop turns on and opens a small menu with a choice. click on the line with the signature “BIOS Setup”.

How to Enter BIOS on Lenovo Laptop: Method 4

If you have Windows 10, then there is another way to boot the BIOS, similar to the previous one. Here it is carried out in a slightly different way:

  • In the “Start” menu, click on “Options”, select “Update and Security”;
  • Open the “Recovery” tab and click on restart under the “Special boot options” label;
  • The device reboots, and we see an action selection window. After you enter the desired menu, do the same as in the previous paragraph when starting BIOS on Windows1.

If, when using this or the previous method, you did not see the “UEFI Firmware Options” button on the screen, this means either that this laptop has an outdated BIOS version without UEFI, or that the OS was installed on the laptop in Legacy mode. Then work with UEFI is not available from the operating system. you will have to use the first two methods.

Entering BIOS on Lenovo laptop

Probably, there are no PC users who, at least once during the entire time of their work with a computer, would not need to enter the BIOS. Those who use Lenovo products did not stand aside either. This manufacturer has a huge list of laptops, and not all of them can enter the BIOS in the same way, but it is easy to configure it. the functions are the same everywhere. Today we will try to figure out how to enter the BIOS in a lenovo laptop, be it Lenovo s9, Lenovo z50 or Lenovo b50.

Why might there be a need to enter BIOS on Lenovo at all? Even despite the fact that laptop manufacturers in each new released model try to minimize the requirements for PC knowledge from the user and give the simplest answer to the question of how to set it up or determine the cause of problems, sometimes it becomes necessary to fine-tune the parameters. What you can use this input for:

  • Turning on and off some of the hardware parts of the laptop, diagnosing problems;
  • Configuring boot parameters for the OS and the entire device;
  • Setting up the disk subsystem, in particular, the modes of its operation;
  • Customization of many other functions, parts or system in general.

How to enter BIOS: method 5

The latter method is the most radical, and can only be recommended to those users who already have good experience in disassembling such a device. Otherwise, you run the risk of irreparably damaging your Lenovo laptop.

The essence of the method is as follows: to reset all BIOS settings, you need to disconnect for a while a special CMOS battery that is connected to the motherboard of the device. After performing this action, the device will “think” that the settings may be incorrect and will prompt you to open the BIOS to correct them, or it will enter it on its own.

How to enter the BIOS on most Lenovo ThinkPad laptops. The easy way!

BIOS batteries look different and in almost every model each has its own place, so you have to dig around before you get to it and unplug it. But in general, the procedure is as follows:

  • Disconnect the laptop, remove the battery;
  • Access the CMOS battery and carefully disconnect it from the motherboard;
  • Wait 15-20 minutes (this is necessary so that the CMOS chip is de-energized and the capacitors on the motherboard are discharged);
  • Connect the battery back, assemble the laptop, plug in the power and turn on the device;
  • If you did everything correctly, you will see the BIOS settings screen.

We hope that one of the above methods helped you find the answer to the question of how to enter BIOS on a Lenovo P70, G50-80, Lenovo ThinkPad T400 or T440 laptop.

How to enter BIOS

Notebook BIOS entry methods may differ on different Lenovo models. First, try the standard login method. when you start a personal computer, you need to press the F2 button on the keyboard, sometimes holding down the Fn key before that. Next, the PC parameters menu will be called.

But this method is not always working. For some Lenovo models, the BIOS does not load when you press F2 or FnF2. for example, Lenovo Legion Y520, Lenovo G70, G50-30, or G500. If you tried to enter the BIOS using the above method, and you did not succeed, the following instruction is for you:

  • On the side of the laptop (where the charging socket is usually located) or right next to the power button, there should be a special small key with a curved arrow. It’s called Novo Button, One Key Recovery, or One Key Rescue System. You need to turn off the laptop and click on it.
  • If you pressed the correct button, the laptop will start, and on the screen you will see that we are going to a special startup menu:
  • Normal Startup
  • BIOS Setup (parameters);
  • System Recovery (system recovery);
  • Boot Menu.
  • As you probably already guessed, in order to enter BIOS on Lenovo, you need to go to BIOSSetup. After you select it, you will see that the laptop entered the BIOS and you can configure it as you like.

How to enter BIOS on Lenovo computers?

Lenovo is one of the largest computer companies in the world. And since the demand for the products of this company is growing, the questions about the correct operation and operation of Lenovo equipment are becoming more and more relevant for users. And for those who decided to reinstall Windows, at the very beginning of the process, the question is raised: how to enter Lenovo BIOS?

First, you need to figure out what BIOS is and what it is eaten with. So, BIOS on Lenovo is a special microscopic program that ensures correct and stable interaction between all components of the PC and OS and allows you to customize it. And the BIOS setting is a standard PC setting that helps the system calculate the functions that should be activated and how they should be loaded. BIOS is on any computer, be it Lenovo B560, Lenovo S21 or M5400.

To date, several different versions of Bios have been created, which differ slightly in appearance, but as for the functions, everything is identical here. Each of the versions is used for the initial setup of the computer and for testing it. The BIOS functionality includes:

  • Date and time setting;
  • Selecting the boot sector. the device from which the operating system will be installed or loaded;
  • Checking system components, including checking the health of RAM and hard drives;
  • Connection protection. password on your laptop to protect personal data.

Two secrets of running BIOS

But if you still did not manage to start the BIOS using one of the above methods, and the laptop is running Windows 8.1 or higher, we will tell you two startup secrets.

  • You need to turn on the PC. In a running computer on the desktop, drag the mouse pointer to the lower right corner of the desktop (call the side menu).
  • A menu opens to us, where we select the items “Options”. “Update and Recovery”. “Recovery”.
  • Here, in the “Special boot options” section, click on the “Reload now” button.
  • Next, a blue screen with tiles will open. Open the “Diagnostics” tile, by clicking on which you will be taken to additional parameters.
  • You need to open the item “UEFI Firmware Options” and click the “Restart” button. Done! You are in BIOS!

Second secret. Many Win 8.1 users make an error when trying to enter BIOS. Everyone knows how to get into the BIOS. you need to press a certain button on the keyboard. To do this, the user clicks on “Shutdown”, waits for the laptop to turn off, and then presses the button to enter the BIOS, but the computer starts up as before. the OS is loading.

The whole problem is that the Windows 8.1 operating system works initially with the fast startup function, which is based on sleep mode. enter the BIOS without turning off the PC, but restarting it.

Some helpful tips:

  • After entering the BIOS, go to the various settings of the system parameters and its boot in the BIOS itself. Be very careful and careful, and it is better not to touch what you do not know, as there is a risk of doing something wrong and completely losing your computer. After making all the changes, go to the “Exit” section and select “Save exit”. After that, the laptop will be restarted, and on a new start, all the settings that you had to set before will already be taken into account.
  • If the above methods of entering BIOS on a Lenovo laptop do not work, try holding down the F12 key while starting the device until the BIOS starts. this method works on some Lenovo models.
  • It is very rare, but it still happens. in some models the F1 key works (you need to press it several times while the laptop turns on).
  • Manufacturers recommend adjusting PC settings in BIOS only with a fully charged laptop battery, since if during the setup process your laptop turns off due to being discharged, then this is likely to cause some system problems in the future.
  • Before exiting BIOS, be sure to save all changes so as not to get lost.
READ  How to make your laptop screen brighter

Remember that BIOS setup is a very serious undertaking that requires maximum understanding of the process and great attention to detail. You should be aware that if the configuration is incorrect, some components of the system may not work correctly, which brings additional difficulties in operation. And if you doubt that you know how to do it right, it is better to call qualified specialists, this will save money, time, and nerves. We hope this article helped you figure out how to enter BIOS.

How to enter BIOS

Anyone who actively uses their PC, sooner or later faces the need to enter the BIOS. However, this does not always work. Now we will talk about how to enter the BIOS, and also consider the basic settings that are available to the user there.

The BIOS name is an English abbreviation that stands for basic input / output system or Basic input and output system. BIOS is one of the main systems of any PC; it is responsible for turning on the computer, starting connected components, loading the operating system, and also interacting the operating system with the hardware. We can say that at a basic level, the BIOS controls the entire computer.

In what situations does it become necessary to enter the BIOS:

  • Overclocking your computer. Using the BIOS, you can specify non-standard frequencies and voltages for the processor, memory and other components. Thus, the performance of the processor and the whole computer can be improved.
  • Selecting a disk to boot the operating system. In the BIOS, the user can specify the drives from which the operating system should boot. In this case, it is possible to specify several drives from which loading is possible. In this case, the computer will try to boot the operating system from the first drive, and if it fails, it will move on to the next one.
  • Enable or disable integrated components. Some integrated components (e.g. sound card) can be disabled and enabled via BIOS.
  • Setting the system date and time. You can specify the system date and time through the BIOS. When you reset the settings, the date and time information is also reset, after which you need to set the system clock again.
  • Monitoring the state of the computer. Some information about the state of the computer can be accessed through the BIOS. For example, you can see the temperature of the processor.
  • Enabling or disabling some specific computer functions.

In order to enter the BIOS, you must press a special key on the keyboard while the computer boots, almost immediately after pressing the power button.

Most often, when the computer boots up, a message appears on the screen telling you which key to press. This message looks something like this: “Press Del to enter Setup”, it is displayed at the bottom of the screen immediately after the computer starts booting. In most cases, in order to enter the BIOS, you need to press Delete. Therefore, if when you boot your computer you do not see a message about which key you need to press, then try Delete first.

However, the Delete key is not always used. Sometimes other keys or even key combinations can be used.

The keys most commonly used to enter BIOS are:

  • F10
  • F11
  • F12
  • F1
  • F2
  • F3
  • Esc

In addition, on some PCs, the following key combinations can be used to enter the BIOS:

  • CtrlAltEsc
  • CtrlAltIns
  • CtrlAltS
  • CtrlAltDel
  • CtrlAlt
  • FnF1
  • CtrlIns
  • CtrlAltEnter

After you have entered the BIOS, you can navigate through all of its items using the keyboard. Let’s consider the main keys that are used to control:

  • Arrows. move up, down and sideways;
  • F1. open a section with;
  • F6 or F9. set default settings;
  • F10. save all changes in the settings and exit;
  • Enter. enter the selected menu;
  • Esc. back or exit. With this key you can go back to the previous screen. If you are on the first screen, then using the Esc key you can exit and restart the computer;
  • Plus and minus keys. Change value. Use the / keys to change the selected value;
  • Tab. select a value;

The creator of the site, the author of more than 2000 articles on computer repair, working with programs, setting up operating systems.

Hello! I have a login problem Asks for the current login code, but I don’t know it. please tell me!

Hello. Is the BIOS password protected? If so, then you need to reset the settings. Check out our article on this topic:

HELLO! the problem is this. I can not enter the BIOS even after resetting the settings, and with the hard drive disabled, and with a different set of keys for entering, and removing the battery and so on. Tell me what could be. Before that I entered calmly.

forgot to add that the PC starts up and works fine)

Does the computer work at all? Does the operating system boot? or it just “hums”, but nothing else can be done with it?

The computer works, the Internet, toys. everything is normal but the BIOS does not enter in any way (black screen). I just wanted to reinstall Windows. There is now a 7 ultimatum. I will add. everything works, but in the BIOS there is no way to fall. So what happened??

Strange problem, did not encounter this. I can offer two options:

If after pressing F1 / Delete the screen just goes black and Windows does not start, then you probably entered the BIOS, but you have problems displaying the image on the screen. You need to check everything connected with this: connect another monitor, replace the video card, etc.

If the computer does not respond to pressing F1 / Delete and continues to load Windows, there may be a problem with the keyboard. The BIOS is probably just not seeing your keyboard. This sometimes happens with modern USB keyboards. Try plugging in a regular cheap PS / 2 keyboard.

Admin, after pressing f1 / div, the screen really turns black, and Windows does not load. Klava. multimedia with PS / 2 connector. So the problem is in vidyuha? (Ge Force 9600PE) Although games and everything else works as usual Motherboard without an integrated video card (NF560-A2G), Biostar. May be a problem in Windows 7, tk. I did not enter BIOS after installation (about 6 months).

Windows has nothing to do with it. I would start to exclude possible options from the monitor. I connected another monitor, then replaced the cable to the monitor, then plugged the cable into another connector of the video card, installed another video card. All this can be borrowed from a friend for a couple of hours and checked.

By the way, have you tried inserting the Windows disc? Suddenly the computer will boot from disk. In this case, you could reinstall Windows without going into the BIOS.

I’ll start trying in stages, then unsubscribe)

Problem? the video card and the processor are heating up, all I did it: cleaned the system unit completely, smeared it with thermal paste.
Checked for viruses, different antivirus programs. I don’t know what else could be.
Problems that have arisen in the system, these are frequent freezes, drawing on the monitor with windows, rebooting by itself, a drop in speed when downloading files from the Internet, and much more
another !

What is the temperature of the video card and processor?

USB or PS / 2 keyboard? If USB then try connecting another keyboard with PS / 2 connector and then enter BIOS.

Good time of the day. There is a problem: My UPS works like an ordinary tee In the PC, the UPS is not reflected, I installed the drivers. everything is useless, tell me. what to do ? BIOS article: where and how to find this UPS ?? Sorry for the pun on words

I reinstalled Windows, it seemed to be installed, but when it turned off to reboot, it no longer turns on. It seems like it is trying, but it does not turn on in any way, what can be done please tell me. Thanks in advance for your help.

There is too little information to suggest anything specific. This situation can come from anything.

Hi, today, when the antivirus was turned off, the cursor disappeared, I decided to restart the computer, after the restart I started to pop out a plate from the BIOS (American Megatrends) in which the characteristics of the computer and the devices connected to it are written (USB devices total: 0 Drive. 1 Keyboard. 1 Mouse. 2 Hub ). It is written below that some files are corrupted (The data in EC or EC flash might be corrupted). Even below, please contact the ASUS service and ask for help, and even below it is written that the system will turn off in 15 seconds. After these 15 seconds, the system actually turns off.

It looks like the board is reporting firmware corruption. I think you should take this computer to a service center. It will be difficult to solve this problem without proper experience / equipment.

I have problems, I can’t enter the BIOS, just a blue screen and some letters

A blue screen means that you have already started to boot Windows. Press the button to enter BIOS before Windows starts to boot.

greetings. when installing Windows there was such a problem. on the hard one there are 4 partitions, one is 3 GB and the rest are 57 and 90 GB each. how to remove this 3 GB partition. or merge it into a larger one (57 GB).

If you need to do this without losing data, then you need to use specialized programs for working with partitions, for example Partition Magic.

Good evening, please help!
When the PC starts, the keyboard and mouse do not immediately start working and therefore I cannot enter the BIOS!
Who knows how to fix this and why this problem is?
Thank you in advance for your attention!

If the motherboard has a PS / 2 connector, then try connecting the keyboard through it (there are USB adapters). Or just try a different keyboard.

Hello admin. My processor is heated at 90 degrees, the video card is at 87 and the PC is cut down. What to do?

If both the processor and the video card are heating at the same time, then these are problems with cooling the entire PC as a whole. Try to clean the system unit from dust first. If it does not help, then you need to improve the air movement in the case with the help of additional fans on the case.

I can not enter BIOS when I press the delete key, black screen and that’s it

Does the computer work at all? Some image appears on the screen at startup?

Hello, the problem is this, Windows was reinstalled, it was 7, it was set to 10, now, during the course of the system, there is an inscription Lenovo and does not want to load further.

It looks like Windows 10 isn’t even starting to boot. Perhaps you need to change the boot disk in the BIOS or fix the Windows 10 boot record.

The computer stopped booting (the name of the computer company appears on the screen and that’s it, then a black screen), I hear boot attempts i.e. the hard drive is trying to load something, but then a window appears with the fact that Windows wants to send some kind of report. How can I restore a successful download version, I did it somehow, but I don’t remember how.

Unfortunately, this description of the problem is too vague to advise anything specific.

I know the solution to your problem Timur! But the admin said it right too. You need to press (press when the system boots) F8. F10 and there select.

Hello. When the computer boots up, another user writes, so I cannot log in through the login and password, when I reboot it does not load the BIOS, I cannot reinstall Windows. And when you reboot through shift, the reboot no functions work, the other user stupidly reboots again to the screen. What can be done?

The ability to enter the BIOS should remain in any case. If you fail, then most likely you are pressing the wrong button. Find the instructions from your motherboard (if it is a laptop, then the instructions from the laptop) and look there for information about entering the BIOS. It should say which button to press.

READ  How to open the cover of a Samsung a50 phone

Besides, reinstalling Windows is not necessary to solve your problem. After booting the computer from a bootable USB flash drive (disk) with your version of Windows, you can reset your password. For example, we have instructions for resetting a password for Windows 7, for Windows 10, the process for resetting a password is slightly different, search the Internet.

How to enter BIOS on a Lenovo laptop

Recently, there are a lot of questions with the BIOS regarding the brand of Lenovo laptops. The fact is that on laptops of this brand (on some models) there is a rather non-standard input into the BIOS (because of this, sometimes even those users who have this is not the first laptop fall into a stupor)

In general, you may need to change the BIOS settings for a variety of reasons. For example, if you need to install Windows, to get information about the hard drive, the serial number of the laptop, turn on / off a device (say, a sound card or function buttons).

In this article, I will consider several possible options for entering the BIOS on laptops of this brand. I think the article will be useful to all users who have encountered this problem

BIOS Login Methods [Lenovo]

1) Standard “hot” keys for login

On the vast majority of laptops of this brand. the F2 or F1 button should act (you need to press immediately after turning on the laptop. Model range: ThinkPad, IdeaPad, 3000 Series, ThinkCentre, ThinkStation).

On some models. may require pressing the FnF2 button combination (for example, in the G50).

Addition. The F12 key (FnF12. enter the Boot Menu) is very rare. to enter the BIOS (model Lenovo b590). I also recommend trying.

If you can’t enter this way, read the following recommendations.

2) Dedicated recovery button “with an arrow”

Some Lenovo notebook models have special buttons on the device to enter the BIOS. For example, we are talking about these: g505, v580c, b50, b560, g50, g500, g505s, g570, g570e, g580, g700, z500, z580, Z50, B70 and others.

When turned on, they may not react at all to your pressing of the F2 buttons. To enter the BIOS, in this case, you need to use the special Recovery button (with an arrow). You need to press it instead of the power button (i.e. when the laptop is turned off).

The Recovery button is located on the body of the device, next to the power button (on some models this button is on the side).

Lenovo G700. button to enter device settings (including BIOS)

Lenovo B70. BIOS entry button next to the power input. It is most convenient to press with a pencil or pen

After you click on this button “with an arrow”. the laptop will turn on and you will see a small service menu (usually consists of several items): Normal startup (normal boot), BIOS Setup (BIOS settings), Boot Menu (boot menu, for example, to boot from a USB flash drive without changing the download queue), etc.

After your choice of BIOS Setup, you will go to the most common BIOS settings (as in other laptops) and you can set the necessary parameters.

If you have a blue ThinkVantage button on the device. then you need to press it right after turning on the laptop. while the greeting is still on and the brand of the device manufacturer is displayed (see photo below).

Next, you will see a menu of several items, among which there will be an entry into the BIOS. the F1 button (see arrow-1 in the screenshot below).

Lenovo Model SL510. Logging in with ThinkVoltage

4) Hole instead of recovery button and ThinkVantage

A number of Lenovo laptop models do not have any buttons at all, but there is a small hole on the side of the device (usually where power is connected).

For example, a Lenovo 100 laptop does not have a recovery button (which is with an arrow) at all. There is a small hole (there is an arrow next to the hole). The button itself is located in this hole, to press it. you need to use, for example, a paper clip or a knitting needle.

Lenovo 100. BIOS entry hole

Manufacturers, apparently, are trying to eliminate accidental button presses. all the same, the vast majority of users have to enter BIOS very rarely.

1) Some laptop models do not allow entering the BIOS if it is running on battery power. I can’t say that this is a 100% glitch. but the setting is very controversial. To check for sure. connect the device to the network and try to enter the BIOS using the methods described above.

2) The Lenovo v580c model sometimes has a very unpleasant glitch: if you cleaned the disk and installed a new Windows, the BIOS entry buttons will stop working for you.

To enter the BIOS again (instructions for advanced users!). turn off the laptop, then unplug it, remove the battery. Next, remove the cover and take out the small battery from the mat. boards. After 5-10 minutes. assemble the device.

When enabled, the BIOS will be loaded automatically to set the basic parameters. You need to open the “Startup” tab: in the item with the “UEFI / Legacy boot” setting there are three parameters (Both, UEFI Only, Legacy Only). you need to select “Both”. In the item “UEFI / Legacy Boot Priority”, you need to set “Legacy”. Next, save the settings and restart the laptop. Everything should work as expected.

How to enter the Boot Menu on Lenovo laptops

For almost all Lenovo brand laptops and all-in-ones, you can use the F12 key to enter the Boot Menu when turning on.

Also, additional boot options for Lenovo laptops can be selected by clicking the small arrow button next to the power button.

The next most popular model of laptops and monoblocks with us is Acer. Entering the Boot Menu on them for different BIOS versions is carried out by pressing the F12 key when turning on.

However, on Acer laptops there is one feature. often, entering the Boot Menu by F12 does not work on them by default and in order for the key to work, you must first enter the BIOS by pressing the F2 key, and then switch the “F12 Boot Menu” parameter to the Enabled state, then save the settings and exit the BIOS.

General information on entering the BIOS boot menu

Just as to enter the BIOS (or configure the UEFI software) when turning on the computer, you must press a certain key, usually Del or F2, so there is a similar key to call the Boot Menu. In most cases, these are F12, F11, Esc, but there are other options, which I will write about below (sometimes information about what you need to press to call the Boot Menu appears immediately on the screen when you turn on the computer, but not always).

over, if all you need is to change the boot order and you need to do this for some one-time action (installing Windows, checking for viruses), then it is better to use the Boot Menu, and not set, for example, boot from a USB flash drive in the BIOS settings.

In the Boot Menu, you will see a list of all devices connected to the computer from which it is potentially possible to boot at the moment (hard drives, flash drives, DVDs and CDs), as well as, possibly, the option to boot the computer network and start restoring a laptop or computer from a backup partition.

Features of entering the Boot Menu in Windows 10 and Windows 8.1 (8)

For laptops and computers that originally came with Windows 8 or 8.1, and soon with Windows 10, entering the Boot Menu using these keys may not work. This is due to the fact that shutdown for these operating systems is not in the full sense of the word shutdown. This is more of a hibernation, and therefore the boot menu may not open when you press F12, Esc, F11 and other keys.

In this case, you can do one of the following:

  • When you select “Shutdown” in Windows 8 and 8.1, hold down the Shift key, in this case the computer should turn off fully and when you turn on the keys to enter the Boot Menu should work.
  • Restart your computer instead of turning it off and on, when restarting, press the desired key.
  • Disable Fast Startup (see How to disable Fast Startup in Windows 10). In Windows 8.1, to do this, go to the Control Panel (the view of the control panel is icons, not categories), select the “Power supply” item, in the list on the left, click “Actions of the power buttons” (even if it is not a laptop), disable the item “Turn on fast launch “(for this you may need to click” Change parameters that are currently unavailable “at the top of the window).

One of these methods should definitely help with entering the boot menu, provided that everything else is done correctly.

Entering the Boot Menu on Asus (for laptops and motherboards)

For almost all desktops with Asus motherboards, the boot menu is entered by pressing the F8 key after turning on the computer (at the same time when we press Del or F9 to enter BIOS or UEFI).

But with laptops, there is some confusion. To enter the Boot Menu on ASUS laptops, depending on the model, you need to press when turning on:

  • Esc. for most (but not all) modern and not so models.
  • F8. for those Asus laptop models whose name begins with x or k, for example x502c or k601 (but not always, there are models on x, where you enter the Boot Menu by pressing the Esc key).

In any case, there are not many options, so you can try each of them if necessary.

Other laptop and motherboard models

For other laptop models, as well as PCs with different motherboards, there are fewer features, and therefore I will simply give the Boot Menu entry keys for them in the form of a list:

  • HP AiOs and Notebook PCs. F9 or Esc followed by F9
  • Dell Laptops. F12
  • Samsung Laptops. Esc
  • Toshiba Laptops. F12
  • Gigabyte motherboards. F12
  • Intel motherboards. Esc
  • Asus motherboards. F8
  • MSI motherboards. F11
  • AsRock. F11

It seems that I took into account all the most common options, and also described the possible nuances. If suddenly you still cannot enter the Boot Menu on any device, leave a comment indicating its model, I will try to find a solution (and do not forget about the points related to fast boot in the latest versions of Windows, which I wrote about higher).

How to enter the Boot Menu on laptops and computers

Boot Menu (boot menu) can be called at startup on most laptops and computers, this menu is a BIOS or UEFI option and allows you to quickly select which drive to boot the computer this time. In this manual I will show you how to enter the Boot Menu on popular models of laptops and PC motherboards.

The described feature can be useful if you need to boot from a Live CD or a bootable USB flash drive to install Windows and more. it is not necessary to change the boot order in the BIOS, as a rule, a single selection of the desired boot device in the Boot Menu is enough. On some laptops, the same menu gives access to the recovery section of the laptop.

First, I will write general information on entering the Boot Menu, nuances for laptops with Windows 10 and 8.1 preinstalled. And then. specifically for each brand: for Asus, Lenovo, Samsung and others laptops, Gigabyte, MSI, Intel motherboards, etc. At the bottom there is also a video showing and explaining the entrance to such a menu.

Distribution of new, sometimes interesting and useful materials from the website. No ads and free computer help for subscribers from the author. Other subscription methods (VK, Odnoklassniki, Telegram., YouTube, Yandex.Dzen)

I tried everything that is described, I can’t get into the boot menu, but I really need it. Maybe what combinations are still there? Factory-assembled PC, intel.

Hello. If Windows 10 or 8.1 is preinstalled on it, then disable Fast Startup (see and try after that

Thanks for the answer. I have 7. Within half an hour, by typing, I found out that the F10 key is responsible for calling the boot menu. (Here is such a big secret of intel.No information anywhere).

Everything written CAN and was relevant about 5 years ago, but for some reason it is not relevant at the moment. When I select the UEFI setting for the GPT disk in the BIOS and Windows 10 is installed, I only see Windows boot. There is no cd-rom, no disk, nothing AT ALL. Although UEFI. BIOS configured correctly. Correctly HOW absolutely everyone recommends on YouTube and on forums and on similar sites.
I have a motherboard G970A. D3
I could not find anything in this HUGE trash heap. INTERNET.
Thanks for reading. Although there will probably be no answer. I’m not a pro, so a “boiled” kettle.

READ  How to take a screenshot of the screen on a laptop

It is still relevant now. And the fact that Windows Boot Manager is shown as a boot device, and flash drives and disks without UEFI boot support are not shown if the BIOS is set to boot only in UEFI mode. this is normal.

Good afternoon, tell me how to enter the boot menu on a PC sony vaio? Fast startup is disabled, F 11 and F12 do not help. thank.

I don’t remember (I also had Vaio). Either F2 or F10. Sometimes you need to press the FnF key for it to work.

Is it possible to force UEFI to automatically display the selection of disks when it is turned on? PC with three disks, three operating systems with their own bootloaders.

No, I don’t know such methods and haven’t seen them on any computers / laptops.
So from the options it comes to mind only to make the main boot, for example, a system with GRUB, and then add the rest of the systems to the boot.

Boot Menu on Lenovo IdeaPad L340 laptop F2 key

Running through the operating system

The last method of launching is universal and is suitable for any computer that is controlled by the Windows 10 operating system. To do this, you will need to do the following:

  • Launch the “Settings” application. You can right-click on the “Start” icon and select the item of the same name in the menu that opens.
  • Now go to the Update & Security section.
  • A list of thematic tabs will appear on the left. You need to open “Recovery”.
  • Then a list of functions appears on the right. Find the “Restart Now” button and use it. Before doing this, do not forget to close all important documents and applications so as not to spoil them.

Now the computer will restart, and instead of the operating system, you will see a special menu on the screen. First you need to go to the subsection “Troubleshooting”. In it, open additional parameters and click on the marked button.

This action will lead to another restart of the laptop. As a result, the BIOS settings menu will open, in which you can perform the necessary actions.

You can go to the same method through the “Control Panel” or the “Start” menu. The last option is the simplest and most convenient. You just need to open the Shutdown list and hold down the Shift button and select the restart item. The same function works on the lock screen of the operating system.

Dedicated NOVO button

Every laptop manufacturer is trying to add proprietary features to computer management. Lenovo has become such an option with a separate physical button called NOVO. Its task is to simplify computer management. When pressed, a separate menu is launched, in which you can activate recovery to factory settings, set the boot priority, continue system startup, or enter the BIOS. Some Lenovo models use a button with a special symbol:

But in the IdeaPad 320, the creators made a hidden button that must be pressed with a thin object, such as a paper clip or a needle. On this laptop, the NOVO Button is located on the left side panel as noted in the photo.

First turn on the computer and immediately press the button once. Instead of loading the OS, a menu of 4 items will appear on the screen. Select BIOS Setup.


Let’s start with the standard method found on any laptop. These are special keys programmed to enable the BIOS. Usually, this button does not depend on the manufacturer of the device, but on the model of the motherboard and the version of the installed software. If you take the Lenovo IdeaPad 320, then with the original firmware and hardware, the user needs to press the F2 button on the initial power-on screen.

If this option did not work, then try the combination of keys Fn F2. This is because the system buttons can only be activated with an auxiliary key. You can also find out the exact button on the startup screen, where you can find information about the BIOS manufacturer and software version:

How to enter BIOS Lenovo IdeaPad 320

The BIOS menu is a tool for selecting computer settings at the hardware level. This functionality is used when changing the priority of loading hard drives, to check the equipment and its condition. In addition to the general BIOS startup methods, there are unique methods for each computer manufacturer. Let’s figure out how to enter the “BIOS” on the Lenovo IdeaPad 320.

We have covered all the BIOS setup options that are available on the Lenovo IdeaPad 320 laptop. The user should know each method if one of them stops working. If you have read our instructions and you still have questions, then ask them in the comments. We will pay attention to every visitor!

How to enter BIOS on a Lenovo laptop

Good day.

Lenovo is one of the most popular laptop manufacturers. By the way, I must tell you (from personal experience), laptops are quite good and reliable. And there is one feature of some models of these laptops. an unusual entry into the BIOS (and you often need to enter it, for example, to reinstall Windows).

In this relatively short article, I would like to consider these features of the entrance

Entering BIOS on a Lenovo laptop (step by step)

1) Usually, to enter the BIOS on Lenovo laptops (on most models), it is enough to press the F2 (or FnF2) button when it is turned on.

However, some models may not react at all to these presses (for example, Lenovo Z50, Lenovo G50, and in general the model range: g505, v580c, b50, b560, b590, g50, g500, g505s, g570, g570e, g580, g700. z500, z580 may not respond to these keys)

2) The above models have a special button on the side panel (usually next to the power cable) (for example, Lenovo G50 model, see Fig. 2).

To enter the BIOS, you need to: turn off the laptop, and then click on this button (an arrow is usually drawn on it, although I admit that on some models the arrow may not be).

By the way, an important point. Not all Lenovo laptop models have this service button on the side. For example, on a Lenovo G480 laptop. this button is next to the laptop power button (see Fig. 2.1).

3) If everything was done correctly, the laptop should turn on and a service menu with four items will appear on the screen (see Fig. 3):

To enter BIOS. select BIOS Setup (BIOS settings and settings).

4) Next, the most common BIOS menu should appear. Then you can configure the BIOS in the same way as other laptop models (the settings are almost identical).

By the way, maybe someone will need it: in fig. 4 shows the settings of the BOOT section of the Lenovo G480 laptop for installing Windows 7 on it:

  • Boot Mode: [Legacy Support]
  • Boot Priority: [Legacy First]
  • USB Boot: [Enabled]
  • Boot Device Priority: PLDS DVD RW (this is a drive with a Windows 7 boot disk installed in it, note that it is the first in this list), Internal HDD

After changing all the settings, do not forget to save them. To do this, in the EXIT section, select “Save and exit”. After restarting the laptop, the installation of Windows 7 should start

5) There are certain laptop models, such as Lenovo b590 and v580c, where you may need the F12 key to enter the BIOS. Holding this key right after turning on the laptop. you can get into Quick Boot (quick menu). where you can easily change the boot order of various devices (HDD, CD-Rom, USB).

6) And the F1 key is used quite rarely. You may need it if you are using a Lenovo b590 laptop. The key must be pressed and held after turning on the device. The BIOS menu itself differs little from the standard.

The manufacturer recommends that you charge the laptop battery sufficiently before entering the BIOS. If during the process of setting and setting parameters in the BIOS, the device is abnormally turned off (due to lack of power). there may be problems in the further operation of the laptop.

To be honest, I’m not ready to comment on the last recommendation: I have never experienced problems when turning off a PC when I was in the BIOS settings

Configuring BIOS on Lenovo b50-70 to install boot from a USB flash drive

To configure booting from a USB flash drive to Lenovo b50-70, install it into the USB port and go to the settings using the FnF2 key combination. Go to the Boot tab in the Boot Mode section and change UEFI to Legacy Support. In Boot Priority, we also change to Legacy First. Then we exit and confirm saving the changes.

After restarting the laptop, you again need to go into the BIOS settings using FnF2. Go to the Boot tab. Here, in the Legacy section, a hard disk, a drive and a USB flash drive appeared. To boot from a USB flash drive, transfer it to the first place using the FnF6 keys.

After installing the operating system from a USB flash drive, you can return the default settings (to factory settings) in the Exit section. Here we select the item Load Default Setting.

How to enter settings on a Lenovo b50-30 laptop

On this model, you will not enter BIOS settings using the Delete, F2, F8 or F10 buttons, and there is no button near the power input. The button for calling the Novo menu is located on the right side near the USB port. In order to press this button, you need a pin or sharp object. Then you will be taken to the “Novo Button Menu”.

Methods for Entering BIOS Settings on Lenovo Laptops

BIOS is a very important component of a computer and is a piece of system software. With its help, when the computer is turned on, the operability of all components is tested and checked. It allows the user to make changes to the operation of individual components of the computer, set the boot priority, date and time, etc. In this article, we will look at how to enter the BIOS on Lenovo laptops. In different models of Lenovo brand laptops, the input is slightly different. If this is the first time you want to enter the BIOS, you can see how to do this in the instructions for your laptop. There is also a way to find out which login keys your model is using. Within 2-3 seconds after turning on the laptop, they are displayed on the screen as a hint.

In general, most Lenovo models use the F2 key or FnF2 combination to enter the BIOS. But not all models respond to their pressing.

Entering BIOS on Lenovo g50-30 laptop

In order to enter the BIOS on the Lenovo g50 model, you need to press a special button, near which an arrow is indicated. This button is located near the power (charging) input. On the switched off laptop, you need to press and hold it until “Novo Button Menu” appears.

Then use the up / down arrows to select “BIOS Setup”. Thus, you will be able to enter the settings in the BIOS. If you change something in the settings, press FnF10 to save the changes and exit. After you will be prompted to save the changes and then press Enter to confirm them.

Features of entering BIOS on laptops with Windows 8

Let’s consider how to enter BIOS on a Lenovo v580c laptop with Windows 8 installed. After pressing and holding the special button (with an arrow) near the power input, the Windows 8 system recovery window appears.
Select the language, keyboard layout, then the “Diagnostics” mode (computer recovery). Then go to “Advanced Settings”, then to “UEFI Firmware Settings” and click on the “Restart” button. After we get to the BIOS menu.

Another case is when after installing Windows 8 on a v570 laptop, the BIOS entry keys F2 and F12 are automatically blocked. Also in this model there is no special button “Novo”.

To unlock them, you need to remove the battery, unscrew the bottom cover and remove the battery for a few minutes. Thus, the BIOS settings are reset. After that, the keys will be unlocked.