How to overclock monitor hertzovka on win 10

How to change Windows 10 screen refresh rate

RADEON settings

In the updated drivers for red graphic cards, you can no longer SIMply select the desired hertz value among the list of available modes. But it is possible to create a custom resolution with the required screen refresh rate. If the current value of the frequency goes beyond the prescribed value specified in the characteristics of the monitor, this should already be considered overclocking.

  • In RADEON settings go to Display Custom Resolution Create.
  • Now enter a value for the Screen Refresh Rate (Hz), and click the Save button.

We do not recommend overclocking the monitor hertzon unnecessarily. You can write a separate article about overclocking the refresh rate. It is often safe to raise the refresh rate by a few percent.

How to change the hertz of the monitor Windows 10

The screen refresh rate indicates the maximum number of frames per second that the user can see on the monitor. It is under the value of the hertzovka of the monitor that the refresh rate is meant. You can view and, if necessary, increase the value of the screen refresh rate directly in the Windows 10 operating system.

This article will show you how to change the hertz of the monitor in Windows 10. The ability to enable vertical sync in games adjusts the number of frames per second to the monitor refresh rate. You can change the refresh rate of the screen only if the monitor supports this feature and there are updated video card drivers on Windows 10.

System parameters

  • Go to Settings System Display Advanced Display Settings.
  • Now in Display Adapter Properties for Display 1, and open the List of All Modes.
  • Select the one with the highest refresh rate and apply the changes.

You can also go directly to the properties of the video adapter to the Monitor section. In the current location, in the monitor settings section, you can view and change the value of the screen refresh rate.

It is enough to select the desired value (it is better to set the maximum supported value of the hertz of the monitor) and apply the changes. The refresh rate value changes instantly without the need to reboot the system. In the window that opens, confirm your intention to save the changes, otherwise they will be returned to the previous settings.

NVIDIA Control Panel

In the classic and at the same time slightly outdated NVIDIA Control Panel, you can also change both the monitor resolution and its refresh rate. There are many ways to open the NVIDIA Control Panel on Windows 10.

  • Go to Control Panel Display Change Resolution.
  • Expand the Refresh rate list and select the desired hertz value.

In addition, the proprietary software allows you to create your own profiles with manually set resolution and refresh rate. So you can perform a slight overclocking of the monitor’s hertz. You can do this under Change permission Settings Create custom permission.

Intel HD Graphics Control

In the Basic settings section, just select the Refresh rate value. After applying the changes, the screen will go out for a moment and will already work at the selected frequency.

It is recommended to set the resolution and refresh rate corresponding to the values ​​specified in the monitor specifications. If the selected values ​​do not correspond to the actual resolution of the monitor, this may adversely affect the user’s vision. After installing the video card drivers, you can change the hertz pattern directly in the Windows 10 operating system.

How to overclock the monitor to 75 Hertz

Recently, overclocking monitors to 75 Hertz has become a fairly popular topic. The fact is that many modern models officially support only 60 Hz, although they are quite capable of working normally at a frequency of 75 Hz.

Increasing your monitor’s refresh rate from 60 Hz to 75 Hz can help you experience smoother gaming and reduce eye fatigue. Therefore, if the monitor supports such a frequency, then such overclocking brings only advantages. In this tutorial, we will show you how to overclock your monitor to 75Hz using NVIDIA / AMD drivers or special programs.

Overclocking on AMD

In order to overclock your monitor to 75 Hertz with an AMD graphics card, you need a new driver that includes a modern control panel. You can download such a driver on the official website.

To overclock the monitor, you need to launch a new AMD video card control panel, go to the “Display” section and click on the “Create” button.

As a result, you will be taken to a screen with monitor settings. Here you need to set the refresh rate of the monitor to 75 Hz and click on the “Save” button.

After applying the custom resolution, the monitor should be overclocked to 75 Hertz.

Overclocking with CRU

If the above methods of overclocking the monitor to 75 Hertz did not suit you, then you can use the CRU program or the Custom Resolution Utility. You can download this program at www.monitortests.com/forum/.

After downloading the CRU program, you need to unpack it to any folder and run it with administrator rights. You should start the setup by choosing a monitor. To do this, open the drop-down menu at the top of the window and select the monitor that you want to overclock to 75 Hz.

After that, you need to click on the “ADD” button and add a new screen resolution, which will include a refresh rate of 75 Hertz.

Next, you need to move the created screen resolution to the first position and save the settings by clicking on the “OK” button.

After saving the settings, you need to reload the video card driver. To do this, use the “restart.exe” utility that comes with the CRU program.

After restarting the drivers, the monitor can be overclocked to 75 Hz through the standard settings of the Windows operating system. For Windows 10, open the Settings (Win-i) menu and go to System. Display.
Additional display options “. Here you need to select a monitor, click on the “Properties of the video adapter” button, go to the “Monitor” tab and specify the refresh rate in 75 Hz.

In Windows 7, you need to right-click on the desktop, select “Screen Resolution” and go to “Advanced Settings. Monitor tab”.

Overclocking on NVIDIA

If you use a video card from NVIDIA, then overclocking the monitor will not be difficult for you. The fact is that the “NVIDIA Control Panel”, which is installed along with NVIDIA drivers, has long supported this function and will allow you to set any refresh rate in just a few clicks.

First, you need to right-click on the desktop and open the “NVIDIA Control Panel” or follow the path “Control Panel. Hardware and Sound. NVIDIA Control Panel”. Learn more about this in the article How to open the “NVIDIA Control Panel”.

In the “NVIDIA Control Panel” window, open the “Display. Change Resolution” section, select the monitor that you want to overclock to 75 Hz and click on the “Settings” button.

Next, the “Settings” window will appear. Here, just click on the “Create custom permission” button and go to the next step.

This should open the Create Custom Permission window. Here you can configure many parameters that affect the operation of the monitor. In particular, here you can set your own resolution, color depth and refresh rate. In order to overclock the monitor to 75 Hz, set this value in the “Refresh rate (Hz)” field and click on the “Test” button.

The NVIDIA driver will then try to set the frequency to 75Hz. If the monitor starts up with overclocking, a message will appear on the screen stating that the test was successful and you can keep this resolution. Here, to continue, you need to click on the “Yes” button.

Then you will return to the main window of the NVIDIA Control Panel. Here, in the list of available permissions, the new custom permission should appear. Select it, set the monitor refresh rate to 75 Hz, click on the “Apply” button and confirm saving the changes.

After that, your monitor should start overclocking to 75 Hertz.

Overclocking check

You can use the Windows settings to check the monitor frequency. If you are using Windows 10, then you need to open the “Settings” menu (for example, using the Win-i combination) and go to the “System. Display. Additional display settings” section. Resolution, refresh rate and other parameters for all connected monitors will be displayed here.

In Windows 7, to check the monitor overclocking, you need to right-click on the desktop, select “Screen Resolution” and go to “Advanced Settings. Monitor tab”.

Overclocking the monitor on an Nvidia video card

  • Right click on the desktop and select Nvidia Control Panel.
  • In the left menu, select Display. Change Resolution. Click on the Settings button.

How to overclock your monitor

Even if your graphics card is capable of delivering 100 FPS at ultra settings in your favorite games, all this does not make sense if your monitor is running at 60 Hz. There are already many monitors on the market with a frequency of 90, 100, 120 or 144 Hz, but not everyone can afford them. The good news is that pretty much any monitor can be overclocked for a slightly smoother picture. This tutorial will tell you how to do it.

READ  How to record screen on Honor 20

Overclocking the monitor with CRU

Finally, let’s look at another way to overclock the monitor. If for some reason you could not overclock the monitor using the standard control panel of your video card, use the Custom Resolution Utility application. It’s free and available here.

  • The disadvantage of this method is that it is difficult to test it, because after each frequency change, you must restart the computer and turn on the frequency from the control panel. Still, this method will help you overclock your monitor if others for some reason did not work.
  • Unpack the archive with the utility and run the CRU file. Please note that the utility requires Administrator rights.
  • Find Detailed Resolutions and click the Add button. A window for setting custom resolution will appear.
  • From the Timing dropdown menu, select Automatic. LCD Native.
  • Leave the usual resolution, and in the Frequency field, enter the new frequency in the RefreshRate box. Click Ok. Then click OK again. The application will close.
  • Restart your computer and then open Settings. System. Display.
  • Click Advanced display options.
  • Click on Display Adapter 1 Properties.
  • In the new window go to the Monitor tab and select the desired frequency from the drop-down menu. Click OK, after which the screen will switch to the frequency you selected.
  • Don’t forget to run an overclocking test and make sure it’s stable.

How to overclock a monitor on an Intel graphics card

The procedures differ only in the control panel interfaces. The principle remains the same. Maintain native resolution, increase frequency, save, test.

  • Right click on the desktop and select Intel HD Graphics Control Panel. Select Display.
  • On the left side, click Custom Permissions, after which a warning about the dangers of installing custom permissions will appear on the screen. Agree, click Yes.
  • On the Add tab, set the standard definition and new frequency. Start small. If the standard frequency is 60 Hz, start at 65 Hz and slowly raise.
  • To apply, click on the Add button.
  • Check the stability of the monitor overclocking link.

How to overclock the monitor to 75 hertz and above

Monitor overclocking is possible on any video card, even on integrated Intel graphics. AMD, Nvidia, and Intel have their own control panels where you can overclock. There is also a universal overclocking utility. This article will cover all overclocking methods.

Before moving on to overclocking, it is worth considering that not all monitors race the same, so your results may differ from ours or other metrics on the Internet. Many monitors have a manufacturer’s overclocking clearance. My monitor, for example, runs at 60Hz by default, but easily races to 75-78Hz. Only when trying to set 80Hz did I get an error about unsupported resolution. Other models will achieve a higher value. Also, keep in mind that monitor overclocking comes with certain risks, so don’t try to get too high. You won’t be able to overclock 60 Hz to 120 Hz (it’s not a fact that you can even take 90 Hz), so overclock the screen without undue fanaticism.

For your information, at frequencies above 60 Hz, small increases will be difficult to notice. Yes, you will see the difference between 60 Hz and 90 Hz (respectively between 60 and 90 FPS), but with intermediate values ​​it will be more difficult.

When you change the frequency of your monitor, as well as when you change its resolution, the monitor may go dark for a second or two. Do not be alarmed, it should be so. Also, do not be afraid of artifacts or suddenly changing colors. This is a signal that the frequency is too high and needs to be lowered.

Tip: Before overclocking, also make sure you have the latest graphics card driver installed.

if you are unable to achieve high overclocking values, try using a different cable. My monitor did not run at more than 65 Hz via a DVI cable, but when using HDMI, I managed to achieve 75-78 Hz.

How to overclock a monitor on an AMD graphics card

The principle is the same as in the case of Nvidia (and Intel too).

  • Open Radeon Preferences and select Display at the bottom of the window. On the right side of the window there will be a New button.
  • In the Refresh rate section, specify the new frequency. As in the case of Nvidia, you need to raise the values ​​gradually (for a start, you can raise it by 5 Hz, and then raise it by 1-2 Hz) and test each new value. Again, you should not change the quality of the picture or appear artifacts.
  • After completing the configuration, save the parameters and take the test following the link.

How to overclock a laptop monitor

Overclocking a laptop monitor is no different from overclocking a regular monitor. The difference can only be in the overclocking potential and its ability to accelerate in principle. You need to use either the built-in control panels of your graphics manufacturers or the CRU utility, which you just read about.

If you were able to overclock the monitor well, but the video card does not produce enough FPS, it makes sense to try overclocking the video card, which we talked about in a separate article.

How to increase the hertzon of the monitor

People often assume that “120Hz” has something to do with performance, as it is SIMilar to how processor clock speeds are described. In fact, the term describes something slightly different. It is quite possible to change or increase the hertzovka on a laptop with your own hands.

Hertsovka

The refresh rate is the number of times per second that the display refreshes its image. Since motion is displayed by the difference between frames, the refresh rate effectively limits the apparent frame rate. But the refresh rate is not the same as the frame rate. Refresh rate is an attribute of the monitor, and frames is an attribute of the information sent to it.

If you can run the game at 100 frames per second, you can experience the tangible benefits of playing it on a screen that can refresh as many times per second. But if you’re watching a movie at the classic 24fps, a monitor with a higher refresh rate won’t make any difference.

How to increase the refresh rate. instructions

Open the control panel.

overclock, monitor, hertzovka
  • In Windows 10 and Windows 8, this is easiest to do with the user menu. In Windows 7, Windows Vista and Windows XP, you will find a link in the start menu.
  • Click or click Show in the list of applets in the Control Panel window. In Windows Vista, open Personalization instead.
  • “Display” or “Personalization” may not appear depending on the control panel settings. If not, change the view to Small Icons or Classic View, depending on your version of Windows, and then find it again.
  • Click or click on the “Adjust Resolution” link in the left margin of the “Display” window.
  • In Windows Vista, click on “Display Options” at the bottom of the “Personalization” window.
  • In Windows XP and older versions, click on the “Settings” button.
  • Click on the monitor you want to change the refresh rate for (assuming you have more than one monitor).
  • Click or click on the “Advanced Settings” button. This is a button in Windows Vista.
  • In Windows XP, click the Advanced button.
  • In older versions of Windows, click on Adapter to go to refresh rate settings.
  • In the resulting smaller window, which should be SIMilar to the one shown in the screenshot on this page, click or click the Monitor button.
  • Find the “Screen Refresh Rate” dropdown in the middle of the screen. In most cases, the best choice is the highest possible, especially if you see a flickering screen or think that a low one might be causing headaches or other problems.

It is better to leave the checkboxes “Hide modes this monitor cannot display”, provided that this is even an option. Selecting a refresh rate outside this range may damage your graphics card or monitor.

Click or click on the OK button to confirm the changes. Other open windows can be closed.

Follow any additional instructions if they appear on the screen. In most computer settings on most Windows versions, changing the refresh rate will not require any additional steps, but in other cases you may need to restart your computer.

How to zoom in on a gaming monitor

  • On the control panel (press the Win R keys to open Run, enter “Control”, click on the “OK” button). “Appearance and Personalization”. “Display”. “Screen resolution”, here you can configure everything you need; then click on Advanced settings to confirm the screen frequency.
  • Go to the Monitor page; You can check the refresh rate of the screen.

Overclocking with Nvidia graphics cards

Right click on the desktop, go to Nvidia Control Panel and go to the “Adjust Desktop Size and Position” menu.

Then check the box “Override the zoom mode set by games and programs” and apply the changes.

Go to the “Change Resolution” menu and click the “Configure.” button at the bottom.

In the window that opens for you, check the box “Enable permissions that are not displayed on the screen” and click the button “Create custom permission.”.

Enter 80 in the Refresh Rate (Hz) field. And then click the “Test” button.

Now that’s when you realize if this will work. If this works, your display will flash and turn back on with the message.

Once everything is done, click the OK button and the user profile will be saved.

Go back to the Change Resolution menu in the Nvidia Control Panel, click on the newly created profile and click Apply. Now, to check if everything is working, find a place on the screen with a dark background, start moving your mouse and follow it with your eyes. Do it with both profiles: 60Hz and 80Hz (or in your case any other profile). You should see: The mouse pointer is less blurry as you move when the display is set to 80Hz output (or in this case, whatever you set it to).

View screen refresh rate in Windows 10

This term means the number of frames that change in 1 second. This number is measured in hertz (Hz). Of course, the higher this indicator, the smoother the picture is, which the user ultimately sees. Fewer frames entails choppy images, which are not very well perceived by humans even with SIMple surfing the Internet, not to mention dynamic games and certain work projects that require the fastest and smoothest rendering.

READ  What To Do If Steam Black Screen

There are several options at once for how the hertsovka is viewed in the operating system: in fact, the capabilities of Windows itself and third-party programs.

How to find out the refresh rate of the screen in Windows 10

Each monitor has such technical characteristics as the refresh rate of the screen. This is a rather important indicator for an active PC user who is interested not only in going online, but also in playing, developing programs and other serious work tasks. You can find out the current refresh rate of the monitor by different means, and in this article we will tell you about them.

Third party software

Many users have software on their computers that allows them to view information about the hardware. This way of viewing the indicator we need is quite SIMple, but it can be inconvenient if you want to change the monitor mode after viewing. Nevertheless, we will analyze this method and its capabilities using the example of AIDA64.

    Install the program if you do not have it. The trial version is sufficient for one-time use. You can also use other representatives of this type of programs and build on the recommendations below, since the principle will be SIMilar.

You can also find out the available range from minimum to maximum values. Go to the “Monitor” tab.

The required data is written in the line “Frame rate”.

The Video Modes tab, on the other hand, allows you to see which refresh rates are compatible with a given desktop resolution.

You cannot change any values ​​in this and SIMilar programs, so if you need to edit the current indicator, use the following method.

Windows Tools

In the operating system, in contrast to various programs, you can not only view the current value of the hertz, but also change it. In the top ten, this is done as follows:

    Open “Settings” Windows by calling this window with the right mouse button on the “Start” menu.

Go to the “System” section.

While on the “Display” tab, scroll down the right side of the window to the “Additional display settings” link and click on it.

If several monitors are connected, first select the desired one, and then we look at its hertz in the line “Refresh rate (Hz)”.

To change the value in any direction, click on the link “Display adapter properties”.

Switch to the “Monitor” tab, optionally put a check mark next to the “Hide modes that the monitor cannot use” option and click on the drop-down menu to view a list of all frequencies compatible with the current monitor and screen resolution.

After choosing any desired value, click on “OK”. The screen will turn off for a couple of seconds and return to working state with a new frequency. All windows can be closed.

Now you know how to view your screen refresh rate and change it as needed. Setting a lower value is usually not recommended. On the contrary, if after purchasing the monitor you have not changed it yet, although technically there is such a possibility, turn on the highest possible mode. so the comfort when using the monitor for any purpose will only increase.

Refresh rate value

On older CRT monitors, screen flicker rate was an important metric, but for LCD monitors it is not so important. For SIMple office work, a minimum display refresh rate of 60 Hz is sufficient.

But, if we talk about gaming monitors, then for some this parameter can reach 240 Hz. To keep the refresh rate high.

Thanks to this indicator, all game details are correctly displayed on the screen, textures are smooth, the transition between game scenes occurs smoothly without jerking.

When viewing multimedia content, a monitor with a higher resolution will automatically switch to a lower frame rate. No higher than 60 Hz is required for the monitor to display multimedia video in 4K format.

But for a better video viewing without compression for lovers of high-quality pictures, this is not enough. Therefore, 120 Hz is acceptable for viewing 2K video, and 240 Hz for FullHD video format.

The refresh rate of a monitor is one of the important characteristics of a monitor. Now, using the information received, you have an idea of ​​the image quality and the ability to change it depending on the tasks being performed.

How to find out how many hertz are in the monitor

As I said above, this parameter means changing the number of frames per second. It is customary to measure the refresh rate in hertz (Hz). The more frequently frames are refreshed, the higher the refresh rate.

To find out the value of the screen refresh rate in Windows 10, you must open the context menu on the monitor desktop.

  • Right-click on a free space on the desktop and in the context menu that opens, go to the penultimate item “Display settings”.
  • In the Display settings section, scroll down to the “Additional display settings”.
  • In the window that opens, all the necessary parameters and information about the display are listed: desktop resolution, active signal resolution, refresh rate, bit depth, color format, color space.
  • If there is a need to configure this parameter manually, then you need to go to the link “Properties of the video adapter for the display”, go to the Monitor tab in the pop-up information window and set the required display flicker parameter.

How to find out how many Hertz is in a Windows 10 monitor

How to find out how many hertz is in a Windows 10 monitor, you will learn from this article. First of all, I must clarify for beginners that hertz is the frame rate.

That is, how many times the image on the screen changes in one second, this indicator will tell you. For example, 60 HZ. means that 60 frames will flash in front of us in a second.

Screen refresh rate is the most commonly encountered parameter on a computer monitor. I also want to clarify that the frame rate depends only on what kind of monitor you have.

The operating system installed on the computer does not affect this indicator in any way. It doesn’t matter if you have a seven or a ten, since it depends only on the technical characteristics of the monitor.

Computer Internet Blog = Articles That Make Money

Take as a gift my many years of experience. the book “Auto Sales through Blog”

In fact, there are many different ways to find out the hertz of a monitor. For example, look in the documents on the monitor, in the technical specifications section.

You can hammer your monitor model into the search and find the characteristics of the screen (display) in the search results. So Yandex with Google to help.

And who still did not understand anything can watch the video below.

Monitor matrix overclocking. theory and practice

Most PC users, I think, have heard about the fact that you can overclock a processor, video card or RAM. However, few people know about the fact that you can also overclock the monitor, and often the difference from its overclocking is more significant and noticeable than from overclocking other hardware. It is also safer, but more on that below.

Theory To begin with, what is meant by overclocking a monitor matrix? This implies an increase in the refresh rate of the monitor from the standard 60 Hz and how much it will turn out. 70-75, sometimes 120, and even 150 Hz (!). Why is this needed? To improve the smoothness of the picture. What does it mean that the refresh rate of the monitor is 60 Hz? This means that the picture on the screen changes exactly 60 times per second. At the same time, the video card can produce both a lower number of fps and more. If the number of frames issued by the video card is less than the refresh rate, then a certain frame will be displayed twice (or even three times), which can lead to noticeable delays. If the number of frames issued by the video card is greater than the monitor’s refresh rate, then it will turn out that two or three frames will be displayed on the screen at once, which will lead to artifacts:

The trade-off is the vertical sync setting. What is its essence? It tightly links one frame prepared by the video card to one update of the image on the monitor. And here, if your video card consistently produces more frames than the monitor‘s refresh rate, then you will get an ideal smooth picture, but your video card will not be 100% loaded at times and will rest. And it is precisely this mode of operation that is often used in the system. for example, when you scroll in the browser, you do not see artifacts, and at the same time the scrolling is smooth.

Raising the refresh rate of the monitor kills two birds with one stone: firstly, now vertical sync will run at a higher frequency, which means the smoothness will increase even more (I think everyone saw the difference in videos on YouTube with 30 and 60 frames? Here too). Secondly, if your video card in games produced more than 60 frames per second, now the threshold for the appearance of artifacts is pushed back to the new refresh rate, while the information on the screen will be updated more often, which is quite important for dynamic games.

Of course, the question arises. how safe is it? It is much safer than overclocking hardware: if the monitor cannot work at a given frequency, it SIMply will not turn on. If it works at a given frequency, it means that you will not have any problems. Overheating, as in the case of overclocking a processor or video card, is definitely not in danger.

Practice Now that we have figured out the theory a little, you can move on to practice. The first thing to know is that any monitor and even laptop matrices are chasing, but there are several limiting factors at once. The first is the connection method: via DVI at a resolution of 1920×1080, you are unlikely to get more than 65 Hz. the reason is the rather low bandwidth of the interface. Through older HDMIs (up to 1.4) at the same resolution, you will most likely be able to get around 75-85 Hz. Well, through the new HDMI (1.4-2.0), Thunderbolt or DisplayPort, there are practically no restrictions. you can get 120-165 Hz. Likewise, there is often no limitation in laptop matrices connected directly to the board. The second limiting factor is the matrix itself, or rather its controller. It happens that even with a fast connection, when the frequency is increased, some image artifacts appear. alas, there is nothing you can do here except to reduce the frequency to the last stable one.

READ  Which screen is better amoled or ips

Now let’s talk about how to overclock. Owners of video cards from Nvidia are lucky here. for them the aLGorithm is SIMple: you need to go to the Nvidia control panel, go to the “Change resolution” tab, click on the “Settings” button, in the window that opens, check the box to enable modes that are not supported by the display, and then click to the button “Create custom resolution”, and in the window that opens, we finally get access to change the refresh rate:

The frequency should be raised by 3-5 Hz, then press the “Test” button. If no artifacts appear and there is an image, raise the frequency even higher. As soon as artifacts appear or the image disappears, reduce it to the previous operating frequency, and then raise it by 1 Hz. in general, everything here is exactly the same as with a normal video card overclocking. After you have found the desired refresh rate, SIMply save the resulting configuration, and it will appear in user permissions.

As you can see, there is no risk here. if the monitor does not start at the frequency you specified, after 20 seconds the system will roll back the frequency value to the default. Alas. everything is so good only with video cards from Nvidia, with video cards from AMD or Intel everything is worse. there you cannot increase the frequency in the driver settings, however there is a universal application that will help you do this. it is called Custom Resolution Utility (CRU), download its latest version can be found here.

I will warn you right away. the program’s problem is that it does not have a Test button, as is the case with Nvidia, so the frequencies are applied immediately and irrevocably. So if after setting the frequency you see a black screen. either connecting a second monitor and returning the settings to default will help you, or entering through safe mode and doing the same.

It is quite SIMple to work with the program. you launch it, remove all resolutions from the standard ones and uncheck all the boxes on the left (I will not do this for myself, because I have already overclocked the matrix through the Nvidia settings): Now, under the window with Detailed resolutions, click on the Add button, set Automatic. LCD Reduced and below we change the refresh rate: Here the principle is the same. we increase the frequency by 3-5 Hz, click OK, save everything and reboot. Now we go into the AMD (or Intel) panel and set a new frequency: Here, in general, that’s all. as you can see, there is nothing difficult or dangerous.

Well, the last question remains. since almost all matrices are overclocked, why don’t manufacturers do this from the factory? Everything is SIMple here: there is such a concept as a standard, and for the refresh rate of monitors it has been 60 Hz for a long time. Therefore, manufacturers, even if the matrix is ​​capable of operating at 70-80 Hz, still limit its frequency to the standard 60 Hz. Secondly. often everything depends on the connection method. For example, you can transfer 1080p60 via any interface, even DVI, even Thunderbolt 3. But for 1080p80 you already need a special cable. DVI and old HDMI are no longer suitable. And in order not to create confusion, manufacturers again limited themselves to 60 hertz.

As for the question, to overclock or not to overclock. it’s up to you and only you. If you managed to increase the frequency from 60 to 65 Hz, then there is no point in such overclocking, you will not see the difference. But when overclocked to 75 and higher Hz, the difference becomes clearly visible, so the game is worth the candle here. It should also be borne in mind that after overclocking, the load on the video card during normal operation will increase. after all, it will now have to produce more frames per second, so if you overclock the matrix on a laptop, you should take into account that your battery life will slightly decrease.

What is the refresh rate, how to find out and change it in Windows 10

Now the vast majority of people on the planet are familiar with computers, monitors and all kinds of gadgets. But few people know how screens work and how they affect vision: why eyes get tired of some devices quickly, while others can work for hours without discomfort. It’s all about the refresh rate of the image on the monitor.

How to change monitor hertz on Windows 10

It is very easy to change the screen frequency in the settings of the driver program:

  • go to the “Display” applet, as shown above;
  • change the filter “Refresh rate” and click “Apply”. Change the filter “Refresh rate” and click “Apply”

It is also possible to change the frequency through the “Parameters”:

  • Open “Advanced Display Settings” as shown in the example above. Click on “Display adapter properties”. In the additional parameters, click on “Properties of the video adapter for the display”
  • In the properties window, go to the “Monitor” tab, change the “Screen refresh rate” filter to the desired value and save the changes with the OK button. In the properties window, go to the “Monitor” tab, change the “Screen refresh rate” filter to the desired value and save the changes with the OK button

Most of the time I use 60Hz as it doesn’t make much sense to play more while working and watching movies. Also, my monitors do not support stereo. However, in rare cases, when I sit down at the computer in order to play, I immediately rearrange the CHOM to at least 100 Hz. The picture in the game immediately improves, drawdowns and frame losses become invisible. Even the colors, it seems to me, change in a more saturated direction, drawing objects becomes more realistic.

Acceptable refresh rate

As mentioned earlier, the average frequency used in most modern monitors is 60 Hz. With this hertsovka you can easily watch movies, as well as play games of average quality (if the “filling” of the PC allows). However, for higher quality and smoother images in more serious games, monitors with a frequency of 120-150 Hz or even higher are required. Some ultra-modern monitors are already overclocked to 240 Hz.

It is advisable to keep the frequency of the 3D monitor at least 120 Hz: in this state, the screen will produce 60 Hz for each eye, which means that it will maintain good picture smoothness parameters.

What is the refresh rate of the monitor, its purpose

The refresh rate of the monitor (hertzovka, CHOM) is the rate at which the images on the screen can change at a time. It is customary to count down in seconds, which means that an average frequency of 60 hertz is the ability to change 60 frames per second. Only hertz does not show the real picture of the monitor’s capabilities. There is such a physical problem: the image transfer from the video card to the monitor is delayed due to the screen matrix. This means that the screen, designed for a frequency of 60 Hz, nominally produces up to 40 frames per second. This is enough for watching movies, but high-quality and smooth gaming requires high FPS (Frames per Second).

Since hertzovka is responsible for the smoothness of the picture, it automatically affects the perception of what is happening with the eye. The less the visual organ uses peripheral and peripheral vision, the less it gets tired, the eye lens deteriorates more slowly, and the contraction of rods and cones is suspended. Accordingly, monitors with a higher frequency capability are less influencing and spoil the eyes.

How to view the hertz of the monitor on Windows 10

There are two main possibilities to find out and change (if possible) the refresh rate of the monitor: through the “Options” or using the settings of the graphics driver:

  • Right-click on an empty space on the desktop and select the “Screen Settings” menu item. Right-click on an empty space on the desktop and select the “Screen Settings” menu item
  • Next, click on “Advanced Display Settings”. Click on “Advanced display options”
  • On the page of additional parameters, we get acquainted with information about all monitors connected to the computer. Hertzovka is indicated in the line “Refresh rate (Hz)”. Hertsovka can be found in the line “Refresh rate”

The second way is graphics driver settings:

  • Right-click on an empty space on the desktop and select “Graphic characteristics”. Depending on the manufacturer of the equipment, the name may be different (video settings, display settings, graphic settings, etc.). Right-click on an empty space on the desktop and select “Graphic characteristics”
  • Go to the “Display” applet. In the graphics control panel, click “Display”
  • Next, we select the display, the information on which we want to find out, and look at the “Refresh rate” column, which shows the set hertz of the screen. Select the monitor and in the “Refresh rate” column look at the hertz value

It is very easy to find out and change the monitor frequency. To do this, open the properties of the adapter or the graphics control program, change and save the necessary settings.

| Contacts | Content | RSS