How to prevent iPhone screen from turning off

Hard restart (shutdown) iPhone

In most cases on the iPhone, when a serious malfunction occurs in software or modules, a “hard reset” is applied to normalize the stable operation of the device. It can also be useful to you if you need to turn off the iPhone, but the sensor does not work. Reboot is written, you say, but we need a complete shutdown, right? But there is a trick here. If you release the keys in time, the device will not turn on. Actually, the procedure is as follows:

Ways to turn off iPhone

You should understand that there can be a hundred reasons why the sensor does not work on the iPhone, so here, for each case, you need to go through all the options. Follow all the steps in order to decide which one suits you best. We’ll start with the simplest.

For models above iPhone X

In recent generations, the process of “hard reset” itself is slightly different from all previous models. The procedure is as follows:

  • Hold down the volume up key and release immediately;
  • Then hold down the volume down key and release;
  • Hold down the Power key for a few seconds until the screen goes blank. If you tighten and do not release the button in time, the phone will start to reboot.

How to turn off iPhone if the screen is not working

Problems can arise with any devices, be it gadgets based on Android or smartphones from Apple, because this is a technique, and sometimes it can malfunction: mechanical influences from the outside or from the user, defective components, software errors and many other reasons. Sometimes users have a problem when the screen stops responding to touch, and as a result, a person cannot do absolutely anything with his phone, especially if it is an iPhone.

If in a conventional device you can simply take and pull out the battery, then for iPhones you need to disassemble half of the phone for this, which can lead to the loss of the warranty. What if your phone’s sensor stops working and you need to turn off your device? There is a way out, and we have described all possible options in this article.!

For iPhone X

Here, the “hard reboot” process is no different from the iPhone 6s. All you need to do is just hold Home and Power for 4-5 seconds until the phone turns off. After that, immediately release the keys to avoid rebooting.

For iPhone 6s and below

  • Simultaneously hold down the Home and Power key on your device and hold for a few seconds, but until the screen turns off;
  • As soon as the screen turns off, immediately release them without waiting for the Apple logo to appear.

Full battery discharge

Another option is to wait until your phone’s battery is completely depleted. Yes, the method is not the most thoughtful, but it should also be taken into account. And you can charge the device without any problems simply by connecting the device to a charger or connecting it to a computer via a USB cable. Just keep in mind that if the device turns off and you have a password set at the entrance, then when you turn it on with a broken screen or a non-working sensor, you will not be able to use it and unlock it.

Through “Settings”

In the “Settings” menu go to the “General” section. Scroll the menu to the very bottom and find the inscription: “Turn off”. Smartphone turns off after 2-3 seconds.

How to turn off iPhone 6

The iPhone 6 looks slightly different from the iPhone 5 in terms of the location of the power button and size. It is located on the side panel, and not at the top, as it was before.

Disconnection with buttons

prevent, iphone, screen, turning

To “lull” the iPhone when the screen freezes or the sensor breaks, it is enough to use 2 main ones: “Home” and “Power”. You need to simultaneously hold down “Home” and “Power” for 5-6 seconds. A black screen will appear, restart will begin.

How to Keep Your iPhone X Screen From Turning Off

Two buttons

To turn off a new smartphone model without using a sensor, hold down the volume up or down button together with the off key. A slider will appear, after swiping to the right, the screen will turn off.

How to turn off iPhone 8

Although the performance of the iPhone 8 is much better than previous ones, the screen often freezes, not wanting to reboot. It is believed that the iPhone 8 is one of the most problematic, but with the release of the update, most of the inaccuracies have been fixed.

Let’s look at different ways to turn off and restart iPhone 8.

Standard way

Despite the fact that the Iphone 7 does not have a Home key, it can be turned off by pressing the Power key. It’s on the right side of the sidebar. Then a slider will appear on the screen, after activating it, the screen will be turned off.

Disconnection by buttons

To turn off iPhone X, you need to simultaneously hold down the shutdown button with one of the volume buttons. This “” or “-” has no special meaning. Hold the press for 3-4 seconds. A slider will appear, which you need to swipe to the right. The device will fall asleep immediately.

How to remove the monitor from sleep mode?

Burning key to switch to sleep mode Windows 10?

  • Press the key combination [Win L], then the computer will go to the lock screen.
  • If nothing is reassigned in the settings, it will automatically go to sleep after a while from the lock screen.
READ  iPhone 8 Screen Won't Turn Off

How to keep the screen from turning off Windows 10?

  • Start Menu → Control Panel → Power Options (small icons must be enabled) → select the power mode you are using and click on “Power Plan Settings”.
  • In the “Put the computer to sleep” field, select “Never” and confirm the actions.

How to set up Windows 10 screen fading?

Right-click on the screen. Next, select personalization, then the lock screen, then the screen saver settings and in the window that opens. in the screensaver item (select the screensaver, no). In the same window, click apply and ok.

How to keep the screen on your phone?

How to keep the screen on Android

  • Open Settings.
  • We are looking for the item “Screen” and in it the section “Auto-lock”, “Sleep mode” or something like that. On Flyme 7 and Android 7.1.2 it looks like “Screen and brightness” and then “Auto-lock”.

How to make the screen on Xiaomi so that the screen does not go out?

How to increase or decrease Xiaomi screen backlight time in MIUI 10

  • Enter Settings:
  • Now scroll down a bit to the System and Device section.
  • Select Lock & Protect:
  • In the Lock screen section, tap on the Sleep mode item:
  • Select the time after which the screen will turn off:

How to change Windows 7 screen blackout time?

A window appears directly for the settings of the energy management system:

  • In this window, by pressing the small arrows opposite the values, select the desired time for dimming the display, turning it off and leaving the PC in sleep mode.
  • When everything is configured, click the “save changes” button

How to change the screen timeout on Windows 7?

In the Control Panel go to System and Security and open the Power Options applet. In the left column of the menu, click on the line “Setting the display off”, specify the period of time of user inactivity, after which the screen will turn off.

How to customize the phone screen so that it does not fade?

We go to the settings of the smartphone. We are looking for the “Screen” section (in different versions of the mobile OS it can also be called “Display”, “Screen and brightness”, etc.). Find the “Screen timeout” option and select the time after which the phone screen should go out when idle.

Configuring the computer to go into sleep mode through Settings

The Windows 10 operating system has an alternative to the Control Panel, the so-called Settings menu, which you can open using the Start menu. Among other things, this menu can be used to configure the current power plan. To do this, open the “Settings” and go to the “System. Power and sleep mode”.

In this section of the “Settings” you can configure when the computer should turn off the screen and go into sleep mode when the computer is inactive for a long time.

How to prevent your computer from going into sleep mode

Many users are annoyed when their computer or laptop goes into sleep mode. This usually happens after some computer idle time or after closing the laptop lid.

The computer behaves in this way in order to save electricity or battery power on the laptop. But, if you don’t care about saving, then you can turn off this function.

In this article, we will tell you how to prevent your computer from going into sleep mode. The article will be relevant for Windows 7, Windows 8 and Windows 10.

Setting the computer to go into sleep mode through the Control Panel

If you want the computer not to go into sleep mode after closing the lid or for a long period of inactivity, then you can change the corresponding settings in the Control Panel and disable this function. This solution works the same on all versions of Windows starting from Windows 7.

So, first you need to open the “Control Panel” and go to the “System and Security” section and then to the “Power supply” subsection. If you can’t find this subsection, then use the search on the “Control Panel”. There is a search bar in the upper right corner of the Control Panel window. Enter “Power supply” there, and you will immediately find what you need. In Windows 8 and Windows 10, you can enter the power settings using the menu that opens with the WindowsX key combination.

After opening the subsection “Power supply” you need to go to the settings of the power supply scheme. Please note that you need the settings for exactly the power scheme that you are using. If you use several power supply schemes, then the settings described below must be repeated for each scheme.

After opening the power settings, you must select the “Never” option for the “Put the computer to sleep” function. Also here you can set the time after which the computer screen will turn off if the computer is idle. After making all changes to the settings, do not forget to click on the “Save changes” button.

After these manipulations, the computer will no longer go into sleep mode when it is idle. But, sleep mode can still be used when closing the laptop lid. In order to disable this function, return to the “Power supply” and go to the “Action when closing the lid”.

After that, you will see a window in which you can configure the behavior of the laptop when you press the power button, when you press the sleep button and when you close the lid. At the same time, for each of these actions, you can configure two options for the behavior of the computer, depending on whether it is running on battery or from the network.

READ  The Laptop Screen Goes Out But Works Itself

To prevent the computer from going to sleep when the lid is closed, change the “Sleep” value to “No action required” for the action when the lid is closed.

Configuring the computer to go into sleep mode through the Command line

You can also prevent the computer from going to sleep using the command line. To do this, open a command prompt and run the following commands in it:

  • powercfg.x.standby-timeout-ac 0
  • powercfg.x.standby-timeout-dc 0

These commands prevent the computer from going into sleep mode (set to “never”) while online (command with the.standby-timeout-ac parameter) and while on battery power (command with the standby-timeout-dc 0 parameter).

It should be noted that the described commands work equally well in Windows 7, Windows 8 and Windows 10.

The creator of the site comp-security.net, the author of more than 2000 articles on computer repair, working with programs, setting up operating systems.

Thanks the article helped a lot. Simple, fast and the first time.

How to prevent the phone screen from going dark

Imagine the situation. You are cooking something in the kitchen, your hands are busy, and at the same time you have launched some kind of video on your phone. And at the most interesting place, the display turns off, and you cannot do anything, since your hands are busy with cooking. Sound familiar? And similar situations can arise anywhere. at work, while driving a car and other places when you need the interface of your gadget to work all the time. What to do? Below we will analyze how to set up the phone so that the screen never goes out. And also consider what methods will help us with this.

Mobile applications that prohibit turning off the phone screen

There are also a number of mobile applications that allow you to keep your phone screen on.

Appendix: Description:
“Keep Screen On”There are several handy options here, including a proximity sensor, settings for each app, and the ability to keep the screen on while the device is charging. In general, in terms of its functionality, it is inferior to the applications described below, but due to its free nature it can be an excellent choice.
“Stay Alive”offers an impressive number of free options, as well as additional features for a fee. For free, you can leave the screen on for an indefinite time, configure the screen off settings for a specific application, and turn off the program if the battery reaches a certain level of discharge. Paid options for solid black, an alternate lock screen when pressed, auto-start at boot, and more.
“Wakey”does all the work of keeping the screen on for free. You just click on the light bulb inside the app and the screen doesn’t go blank until you want to. There is also a timer and dimming option in the free version of the program. The paid version has auto power off, keeping the screen on while charging, and the option to wake up the processor.

In general, the listed applications are a good alternative to make sure that the display of your smartphone does not turn off for a long time.

Why does my mobile phone screen go blank?

Added to this was security considerations when, along with turning off the display, the phone began to lock and go out. This made it possible to avoid the influence of intruders, and prevent both reading information from the screen and interfering with the functionality of the device.

Nevertheless, there are various ways to keep your smartphone on and to increase the duration of its operation. Let’s figure out how to do it.

Extending Display Life on iOS

On Apple’s gadgets, the way to keep the screen of a mobile device from fading looks similar. Go to Settings, there select “Screen and brightness”, then select “Auto-lock”, and tap on “Never”.

What to do to keep the smartphone screen from turning off while charging

In the developer section, there is an option that allows you not to turn off the phone while it is charging. To do this, you need to go to the gadget settings, select the “For developers” section (Developer options), and activate the “Do not turn off the screen” option (or “Active mode”).

How to keep the screen of an Android smartphone from dimming

The functionality of the Android OS allows us to customize the time after which your screen will be turned off. To do this, go to the settings of your phone, there select the “Screen” (Display) section, and in this section, find the “Screen timeout” option. Here you can select the time to turn off the display. Usually the maximum level is 30 minutes.

In other phone models, this option can be found along the “Screen” path, then “Advanced” and “Sleep mode”.

In other models, this is done by switching to “Screen and brightness” and selecting the “Auto-lock” option.

On Xiaomi phones, the “Sleep Mode” option can be found in the “Lock and Protection” section.

On standard Android OS, you won’t be able to completely disable smartphone display fading. And the maximum shutdown interval is 30 minutes. But on firmwares of the MIUI and EMUI level, this is quite possible, there is an option “Do not turn off” or “Never”.

In our material, we figured out how to make sure that the smartphone screen does not go out for a long time. And also what methods and tools can help us with this. If the standard functionality of the operating system is not enough, use the special applications described above. Their capabilities allow you to deactivate the auto-off display, and enjoy the desired functionality of your gadget.

READ  How To Record Video From Windows 10 Screen

IPhone screen not responding to touch: what to do

Apple users have a problem with iPhone not responding to touch. What to do in such a situation and how to fix the malfunction?

It is not uncommon for users to encounter a problem when the iPhone does not respond to touch. This can be caused by a variety of factors, from dust ingress to display breakage. In such a situation, you need to know what to do and how to fix the problem. Therefore, we will consider the main reasons for such a malfunction and how to solve them.

Why iPhone won’t respond to touch?

The cause of such a malfunction can be a large number of factors, the most common of which are:

  • Display wear and tear.
  • The phone could simply freeze, in which case, not only the iPhone does not respond to the sensor, but nothing happens when the buttons are pressed.
  • There was a failure in the system, which also leads to the inoperability of the sensor.
  • The gadget is overheated. In such a situation, part of the screen may not work or it may be all.

In such cases, various failures may appear, for example:

  • The screen on an iPhone is not responding partially or completely.
  • Response to pressing is delayed.
  • Incorrect sensor operation.
  • Complete display failure.

Or other signs. If your iPhone 6 is not responding to touch, what to do in this situation?

Consequences of hard reset iPhone

If the iPhone 7 does not respond to touch, then the hard reset described earlier is applied. In general, it will not bring any harm to the phone, but we note:

  • with frequent use of this method, there is a risk of losing information from the phone’s memory;
  • the phone’s RAM may also fail.

Therefore, you should not abuse this method.

How to troubleshoot?

In cases where the screen of the iPhone 5 does not respond to touch, then it does not necessarily need to be replaced. First, analyze the condition of the phone and make sure that there is no external damage. Eliminate the possibility of moisture ingress.

Try to lock and unlock your phone, in case of minor glitches it helps. If this does not work, then restart the device. To do this when the sensor does not work, you need to:

  • Squeeze the lock button.
  • Even after the shutdown screen appears, continue to hold it until the power is completely turned off.

If the button does not respond and the phone is frozen, then a complete reboot is required, for it:

  • Hold down the lock button and “Home”, on new models where the “Home” key is missing, volume control is used.
  • Hold down the keys for 20 seconds.
  • Wait for iPhone to clear memory and restart.

What to do if these methods didn’t work?

There are a few more ways you can try yourself and save your iPhone. In particular:

  • The most simple, wait for it to discharge and turn off automatically, then try to charge and turn it on. This is a safe way that might help.
  • Another option is to try to restore your phone using iTunes, in case you have a backup. To do this, connect your phone via USB to your computer, go to the program, click “Browse” and then “Restore iPhone”.

This will reset the settings and restore the system to the factory state. Please note that all files and data will be deleted. Therefore, it is worth making a backup and saving it.

How to keep your iPhone screen from shutting off!

And if after that nothing has changed and the iPhone screen is faulty, then the last option is to repair it. Contact the service center to diagnose the gadget and, if necessary, replace the display to restore your iPhone.

| Contacts | Content | RSS