How to properly set up your LG TV screen

Manual setting

If you do not have the desire and time to manually tune the channels, then you can always contact the specialists. However, everyone can also do it on their own. There are no significant difficulties on LG, the process is the same when compared to TVs from other manufacturers.

properly, screen

To receive channels on your TV, take the remote control and open the main menu. Then select the “Manual search” command in the settings. After that, select in the parameters “Cable digital TV”, and also specify the frequency. 170,000 kHz. Set the speed to 6900, and the modulation to 1280 AM. Then click on the “Start” button.

When the tuning of the channels on this frequency is completed, a notification will appear in the menu, how many programs have been found and stored. After that, you need to change the frequency: set 178000, the speed and modulation remain unchanged. Run the search again. Increase the frequency gradually by 8000 kHz. This is how HD broadcasting is configured.

Automatic tuning

To tune your LG TV to receive digital TV, you just need to have a connection to the most common antenna. You will also need a T2 receiver, but modern models of equipment from this manufacturer are equipped with a built-in module. This means that you don’t have to buy an additional set-top box.

Autosearch allows you to find both analogue and digital channels. The main advantage is speed. You do not have to enter additional values, adjust the frequency, etc. Just open the main menu, select “Automatic channel tuning” and wait for the TV-device to do everything for you.

In general, the whole process takes no more than 5 minutes. Of course, you first need to choose source of connection. a cable or an antenna. Now you know how to tune channels on your LG TV automatically.

Step. date and time

Sometimes it is the incorrectly set date and time that cause various software failures. Therefore, before you tune the television, you must first set these parameters. For this:

  • Take your remote control.
  • Click on the “Home” button. the icon with the image of the house.
  • Go to the “Settings” section. the gear icon.
  • Click on “”. the ellipsis icon.
  • Select the “General” tab.
  • Go to the subsection “Time and date”.

Should I consider adjusting the sleep timer and automatically turning on / off the TV as a mandatory setting for LG? In principle, each user chooses these parameters based on their own preferences.

Basic LG TV settings when first turned on

Setting up your LG TV starts right after it is turned on for the first time. Of course, this is not a prerequisite, so you can ignore the setting of such parameters as time, date, language, sleep timer, etc. However, it is better to do everything at once so as not to return to this issue in the future.

We bring to your attention a step-by-step guide, after reading which you can set all the necessary parameters. In total, you will spend a minimum of free time on everything. The main thing is to follow the suggested recommendations.

How to search and tune channels on LG TV

A TV with a bright and rich picture is the most optimal way to spend your daily leisure. Mostly a modern user prefers to watch movies and favorite TV series online, but fans of the classics have not disappeared either, so knowledge about setting up television broadcasting will undoubtedly come to the court.

How do I tune channels on my LG TV? Devices from the popular South Korean brand have no distinctive features, at least in this matter. Therefore, TV channels are tuned according to the standard algorithm. The only difference is that, depending on the brand, the name of commands, parameters, options will change.

The paper manual included in the basic package of the TV-device contains all the information necessary for setting up channels. However, this process is described there superficially, now we will consider the most basic commands and the specifics inherent in LG technology.

Step. choice of location

Using the parameters of the remote control, the user must select a country. If this is not done, then it will be impossible to set up digital TV broadcasting. The region and city are configured here. You can select a country from the drop-down list or simply by specifying the postal code. Modern models are equipped with the option of automatic location determination. However, if there is no Internet connection, then you will have to do it all manually.

  • Take your remote control.
  • Click on the “Home” button. the icon with the image of the house.
  • Go to the “Settings” section. the gear icon.
  • Click on “”. the ellipsis icon.
  • Select the “General” tab.
  • Go to the subsection “Country”.

Step. configuring language options

Allows you to set the menu display language as well as the track for digital TV. Provided that the channel is broadcast in several languages ​​at once. Also, the user will be able to customize the main and auxiliary language support.

It is imperative to configure the language for voice search and keyboard. Absolutely all of the options listed above can be edited in one menu. How to enter it? Follow this step by step algorithm:

  • Take your remote control.
  • Click on the “Home” button. the icon with the image of the house.
  • Go to the “Settings” section. the gear icon.
  • Click on “”. the ellipsis icon.
  • Select the “General” tab.
  • Go to the subsection “Language”.

It is clear that if the default language is Russian, then this step can be skipped.

Setting up IPTV on LG Smart TV

The main feature of the LG Smart TV platform is that the user can not only tune TV channels, but also surf the Internet using a pre-installed browser and other applications. How to set up IPTV on LG Smart TV? Before you start searching for TV channels, you need to connect to the Internet.

Connect an Ethernet cable to the TV via the LAN connector or use a Wi-Fi wireless connection. When the TV device is connected to the Internet, you can set up cable broadcasting.

  • Go to the “Settings” section, and then select the “Network” tab.
  • Select a network connection and tap on the Select screen.
  • In the proposed list, you need to select a wired or wireless connection, and then click on the “Update” button.
  • Now the television equipment is connected to the Internet, you can click on the “Finish” button.
  • We register an account in the operating system, enter a login and email address, come up with a strong password. To confirm the actions, follow the link that will come to your Email.
  • The account has been created, which means you can log in. Download a special application from the LG APPS market. SS IPTV.
  • Run the installed application, it will give you a connection code. Then you need to go to the official website of the application and open the playlist editor, where you enter this code. Then click the “Add device” button.
  • Download any IPTV playlist from here. Then, in the playlist editor, click “Open” and select the downloaded file. You will see a list of channels. Now click “Save”, and on the TV in the application. “Update” (2 round arrows). Choose your playlist and enjoy watching.
  • In the same way, you can add a playlist by link without downloading it. To do this, in the playlist editor on the “External playlists” tab, click the “Add” button and paste the link into the “Source” field. Don’t forget to click the “Save” button. See the video below for more details.
READ  Samsung m21 how to take a screenshot of the screen

LG TV Settings (Calibration)

Game mode

Settings Screen Additional Settings Instant in-game response. If you are using your LG TV to play PC games, you need to enable Instant Response in Game. This is ALLM. Low Latency Output Mode in LG TVs from 2019. As a result, no other settings are needed for the best gaming experience.

Instant in-game response
Instant in-game response On.

If your TV does not have this option, you can manually turn on Game Mode. Settings Display Picture Mode.

Picture Mode
Picture Mode Games

AI picture mode

Settings General Service AI. AI Intelligent Mode can make unwanted changes to picture settings. Therefore, it is recommended to disable it.

AI image
AI image Off.
AI brightness Off.

How to set up your LG 4K TV

What are the best LG picture settings? Unfortunately, there is no general answer to this question. The best picture depends on many factors. These are, firstly, personal preferences. Secondly, the environment. Further, it is important to consider for what purposes the TV is used. watching TV, watching movies, playing computer games.

Of course, it is important which model we are talking about. over, the optimal picture settings of an LG TV may differ from instance to instance. Therefore, on this page we will provide an overview of the settings so that you can optimize them in the future. As a result, all the recommended settings are summarized in tables for convenience.

Advanced settings for your LG Smart TV

Dynamic Contrast: This option can be used to further correct the difference in brightness between light and dark areas of an image.
Dynamic Tone Mapping: Contrast adjustment adapts to brightness of HDR content.

Dynamic Color: This allows you to even more accurately adjust the color saturation of the picture.
Super Resolution: LG upscaling calculates missing pixels at a lower resolution than UHD.
Gamma: The gamma function can be used to adjust the average brightness of the TV screen.
Color Range: Allows you to adapt the color parameters to the input video signal. You can choose between automatic, extended or wide.
Color Filter: Filters the RGB spectrum to better match hue and saturation.
White balance: with the tint of white, you can adjust the colors to your liking.

Image options

Settings Display Picture Mode Settings Picture options. In this menu, you can enable various image enhancement options.

Image options
Noise suppression Off (as needed also: “low”)
Having served. MPEG Noise. Off (as needed also: “low”)
Smooth gradation Low
Black level Low
Eye protection Off.
Real cinema On.
TruMotion Off or User
AI brightness Off.

LG Picture Mode Settings

Backlight: Changes the base brightness. The brighter the room lighting, the brighter the backlight should be.
OLED Backlight: Changes the overall brightness of the OLED pixels. The brighter the room is, the higher the OLED glow should be set. Since OLED has no backlight.
Contrast: Determines the contrast between light and dark areas of the image. It can be increased or decreased depending on personal preference. This allows, for example, to separate the horizon from the landscape.
Brightness: With this parameter, you can adjust the blackness of the dark areas of the image at your discretion so that their details are better emphasized and there is no “black blur”.
Sharpness: adjusting this setting sharpens the image by creating outlines around the content of the image.
Chroma: Here you can adjust the saturation to make the colors look natural. It needs more in a bright room, less in a darker one. For fine tuning, it is best to select an image with multiple faces and adjust the chromaticity so that all faces look natural and have their own natural color tone.
Tint: Adjust the tint to correct the color balance on the screen. The higher the red value, the higher the red component of the color. The higher the green value, the higher the green component of the color.
Color Temp: This parameter allows you to adjust the tone of the picture from warm to cool. Thus, on the one hand, the picture can be displayed a little warmer due to the reddish tones, and on the other hand, it can be displayed colder due to the bluish tones.

How to connect a TV screen?

Raw components and Blu-ray players usually have different display options, but usually manage themselves based on the display they are collaborating with, thanks to the Extended display identification data (EDID) information they encounter. You can manually intervene.

The best way to test this is to go into the display settings of your Blu-ray player or game console to set exactly what they output. Ideally, you are looking for these for 4K output, but many Full HD boxes won’t be able to do that.

If you are watching 4K content on the internet, it will also usually just downgrade to what your TV can output.

If you are a little confused as to what your TV can support, then we would suggest picking the highest available option and just see what happens.

Most sources will briefly show an image to test if your TV can support your chosen settings. And if this image is not displayed, then you can safely assume that your device cannot support it.

Just scroll through the settings until you find the highest option your TV can display.

To complicate matters further, some of the cheaper 4K TVs will only support 4K on a portion of their shared HDMI ports (usually the first two). If your new 4K Blu-ray player cannot display Ultra HD on the screen, try using a different HDMI port to resolve the issue.

How to tune your TV screen?

Now there are no general rules for installing a TV. Everyone has their own house, room layout, technology and different preferences. Not to mention all the smaller factors like lighting, wall placement and how it will fit into your setting.

Plus, it seems like every week a brand new 4K TV or high-tech feature announcement shakes up the home theater market meaning there is always something else to consider buying a picture-perfect TV in the future, but before that you have to set it up properly. your TV screen.

What sources and connections should be on the TV

It may sound obvious, but in order to get the best out of your TV, you need to put the best in it.

It boils down to using high resolution sources. For watching movies and TV shows on disc, regular DVD players are the bare minimum, but if you love quality they should really be pushed out in favor of a decent Ultra HD Blu-ray player.

4K broadcast content is currently minimal, but the gaming world is taking 4K consoles like the Xbox One X and PlayStation 4 Pro by storm. There are also many 4K streaming devices nowadays such as Apple TV 4K.

READ  How to Repeat Screen on iPhone

However, if you really want to buy in 4K content, then you should consider one of the best TV streaming services that has a huge amount of 4K HDR content.

Of course, once you have a TV, it is very important that you use the correct connections. You’ve probably used Sky HD over a SCART connection at some point over the years.

By and large, the only connection you should be using currently is HDMI, unless there is an overriding reason for choosing an outdated interface. Owners of older Panasonic TVs can still have a DisplayPort connection that is used to connect to a PC and can deliver equally high quality signals.

How to adjust dimming on a TV screen?

The quest for deeper blacks has led to a number of image processing techniques that can reduce image quality rather than improve it. Black boost and stretch options can make dark parts of an image appear blacker, but crush much of the subtle shadow detail that makes dark areas compelling.

Dynamic Contrast modifies the level of glare by continually adjusting in response to changes in image content. This can lead to unnatural image swapping. If you notice that it works, try disabling it or minimizing it.

Few things affect overall viewing on an LED LCD TV more than local dimming. Both edge LED TVs (general) and direct backlit LED TVs (not many) use local dimming to adjust the brightness of different parts of the screen independently of each other according to picture requirements.

The technique can be a little rough, resulting in splashing puddles of light and clouding backlights, while bright highlights in a dark scene can illuminate screen stripes and cause distracting side effects.

Set local dimming to a minimum to minimize such hassles.

How light in a room affects the perception of images?

One of the important characteristics of LCD screens is that each one behaves differently depending on the level of ambient light in your room. Since LCD is backlit display technology, it becomes more and more torch-like in a darkened room.

What looked like a black image in a room with medium ambient light turns gray (whether dark gray or light gray) in a darkened room. Panel makers will try all the tricks from filters to highlighting tricks to hide this fact.

OLEDs or plasma screens are self-luminous displays and do not suffer from this torch-like trait. They even perform better in low-light rooms, making them a great choice for moviegoers.

Next time you go to the cinema, watch the black level performance. The middle projected image is also quite gray.

However, if you want to improve picture quality then consider placing a light source such as a lamp behind your TV.

How to set up motion control on the TV screen?

One of the most challenging aspects of picture performance for LED LCD TVs is motion processing. All sorts of frame interpolation is offered to smooth images and remove film shake, but they come with serious caveats.

Aggressive motion control will result in motion distortion, usually presented as a blurry halo around moving objects. Running footballers’ legs will flicker unnaturally, prancing horses may have extra legs, and tennis will be portrayed as a multi-ball game.

High motion interpolation also results in videos like sheen. The most expensive blockbuster may look like a cheap TV drama (hence the often-quoted term “soap opera effect”).

Generally speaking, these modes, called Intelligent Frame Creation or IFC (Panasonic), Trumotion (LG), Motionflow (Sony), and Motion Plus (Samsung), among many others, should be kept away from their highest settings. Mid is usually a worthy compromise for sports and studio content, while Low or Off is best for film and film-like TV dramas.

Many manufacturers allow you to tweak your motion processing settings with adjustable blur and shake sliders. This is often the best choice.

Some LG TVs have one such mode, Customizable User Mode, with variable de-judder (shake effect) and de-blur. Set the former to around 5-7 and the latter to 0, and motion distortion will be reduced to almost zero. The result is a decent compromise for both sports and movies, but just like in game mode, it’s best to adjust the input based on your connected devices.

How to sharpen your TV?

If you think that with sharpening you will get more detail in your television images, then you are likely to be disappointed. Outside of the sharpness setting, all modes will invariably be set too high. Look at black text on a light background: does it have a white glow or a ring around it?

This extra emphasis improves readability when viewed from a distance, but does not improve detail, it actually hides it. And on a 4K TV that is designed for larger / closer viewing, to appreciate the improved detail, it’s best not to. Sharpness should be no higher than 10/15 on the adjustable sensor.

Typically standard defaults are offered with overscanning On. This means that the edges of the image are actually lost outside the frame.

This rarely happens in the HD era, as real picture information is used throughout the 1920 × 1080 HD frame. Non-Overscan modes may have different menu names depending on the brand. Look for aspect ratio adjustments and watch out for what makes the image “recede” and reveal a little more.

How to properly adjust the picture on your LG TV

Many users wonder if they need to adjust the picture on their TV after purchase. LG equipment manufacturers, despite the large production volumes, perform debugging of all TV functions. But nevertheless, Honor stands that the factors and conditions in which your LG TV will be used play an equally important role. The signal source, the height at which it will be installed or hung, the distance from which you plan to watch TV, the size of the room, and even the level of light in the room. everything has a role to play. So you can customize the image “for yourself” only at home after installing and starting up your TV. It is easy to do it yourself, without calling the master at home.

As with any equipment, you should start adjusting the picture on your LG TV by reading the User’s Guide (instructions).

All current LG TVs run on Web OS, which makes operating options intuitive. The easiest way to customize your image. enable the “Intelligent Picture Mode” function. When this mode is active, the TV itself selects the best picture settings for each broadcast.

  • Press the Home button on the remote. Find in the menu the item “Settings” (Icon “Gear”), then in the upper right corner of the screen, select three dots located in a row above each other.
  • Find in the opened list “Screen”, in it you will see the line “Intelligent image mode”.
  • Activate “Intelligent Picture Mode” with the “On” button.

Important: This option is not active in all regions.

If the Smart Mode function is not active in your country, you can manually adjust the picture on your LG TV.

  • Press the Home button on the remote. Find in the menu the item “Settings” (Icon “Gear”), then in the upper right corner of the screen, select three dots located in a row above each other.
  • Find the line “Screen” in the menu that opens. Picture Mode Settings. “Screen mode”.
  • All you need to do is decide which mode you need depending on what kind of content and genre you are going to watch at the moment.

Picture adjustment modes for LG TVs

Standard: Adjust brightness, contrast and sharpness in standard mode.

Vivid: After you turn on this mode, the TV picture will be brighter, more contrasting and sharper by increasing these settings.

READ  Application to take video from the computer screen

“Eco / APS” (depending on the model): When this mode is activated, the picture adjustments can save power consumption.

Cinema: A mode designed for watching movies and TV series.

Sports / Football / Cricket (Mode availability and name depending on model and country): Picture settings allow you to watch sports events in the best quality, including due to increased sharpness of objects moving at high speed.

Games: This mode is specially designed to connect LG TVs to game consoles. In particular, the image is displayed without delay.

Photo (Only supported by Ultra HD TVs): Optimized for viewing images with minimal loss of color.

ISFccc Expert: This mode is exclusively for ISF Certified Image Adjustment Professionals.

In this mode, you can adjust the image using test charts and samples.

What other picture options can you adjust on your LG TV?

In the “Image mode settings” section of the menu (how to open it, see above), you can also adjust other image parameters:

Backlight: The stronger the backlight, the brighter the screen image.

OLED Light: Adjust the brightness of the OLED panel backlight.

Contrast: Adjusts the contrast between light and dark parts of the image.

Brightness: Adjusts the brightness of the screen image.

Sharpness: Adjusts the sharpness of the picture.

  • Horizontal Clarity: Adjusts the clarity of the horizontal border,
  • Sharpness Vertical: Adjusts the sharpness of the vertical border.

Color: Adjusts the color intensity of the image.

Color Temperature: Adjusts the color balance from cool to warm tones.

Also in the “Image settings” menu there is a sub-item “Additional settings” / “Additional settings. Settings “. A number of other parameters can be configured in it:

Dynamic Contrast: Corrects the difference between light and dark on the screen.

Dynamic Color: Corrects the saturation and brightness of colors on the screen.

“Color Corrector”: Optimal ratio of colors on the screen for the visual perception of the viewer.

“Preferred Color”: Correction of individual image settings depending on the individual wishes of the owner.

Super Resolution: Improves the clarity of a blurry picture.

Expand Boundaries: Increase the detail around the edges of the screen.

Sample: Setting Tables Used in Expert Mode.

White Balance: Corrects images with warm or cool tones.

To reset the selected image settings, you need to select the “Reset” item in the “Image mode settings” (how to open it, see above “).

Interface language options

It is important to initially choose the correct language design, both for the keyboard and for voice search, which is available on almost all LG models. In addition, the language in which the channels will be broadcast depends on these settings. To accurately specify the parameters, follow the step-by-step algorithm:

  • We connect the TV to the electrical network, then we start it using the remote control (remote control). We wait a few seconds until the device is fully loaded, then press the “Home” button. She can be depicted as a “House”.
  • Open the “Settings” section in the internal TV menu, select the “Advanced” sub-item. On the screen, it looks like a “Three Dots”.
  • A set of tabs appears. Of these, you should choose only “General”.
  • Open the “Language” section. We carefully review here so that everything is in Russian.

The interface language setting can be changed at any convenient time

If, when you turn on the TV, all steps are performed in Russian, this does not mean that the TV is already fully tuned. It may be necessary to change the interface language for searching on the Internet or inside the software.

Satellite channels on LG TV

For satellite TV, there are also two channel tuning options: automatic and manual. Each of them is carried out according to a separate scheme. Let’s consider them in more detail.

Setting up satellite broadcasts is performed in the same way, only with the specification of a special mode

LG TV Digital Channels: General Connection Rules

Almost all LCD TVs have a built-in digital T2 module. Therefore, there is no need to purchase a separate set-top box. Accordingly, the entire setup will be much faster.

Turning on your LG TV for the first time

After purchasing the device, you need to start it immediately after mounting it on a wall or a special shelf to make sure it is in the correct position. For these purposes, you must use the manual that comes with the equipment.

With geolocation enabled, it will be easier for the satellite to find equipment if the country of use is correctly indicated

Free satellite auto tuning

To search for free programs, you need to perform a step-by-step algorithm on the TV:

  • A special set-top box is purchased that connects to the HDMI output on the TV.
  • If the TV model has a built-in receiver, then the satellite dish plug is connected directly to the output of the connector.
  • Go to the “Menu” item, visit the “Channels” subsection.
  • In the next window, click on the source, choosing “Satellite”, start the process by pressing the “OK” button.
  • In the “Satellite settings” section, be sure to select the option by which the search is carried out. Only suitable when multiple plates are installed.
  • Press the button “Automatic search” and wait for the TV signal about the end of the operation.

When choosing a satellite, it is important to check the box correctly in order to save the channel parameters

As a result, the programs will be displayed in the corresponding section of the operating system.

It is better to configure the programs with the Internet turned off so that there is no signal loss. Internet connection is required only when searching for IPTV channels.

There is no picture

This may be due to improper cable connection from the antenna or set-top box. It is important to check the plug, remove and reinsert it into the connector. If Internet channels are connected, it is recommended to press the corresponding button on the distribution device and on the TV (if available).

General screen settings and format may affect the quality of signal reception.

Make sure noise canceling is turned off on your LG TV

The wrong choice of the mode between the video inputs also causes the loss of the image. Press the corresponding button on the remote control and make sure that the setting is correct.

Location, date and time settings

The choice of the country in which the TV is used is important. This helps to register the product for official use and to select the correct list of TV programs and signals.

  • For these purposes, the remote control is used. You should do all the same steps from 1 to 3 points of the previous section.
  • Next, go to the “Country” tab.
  • In the list that appears, we search for the state in which we are, then press the “Exit” button.
  • To correctly set the date and time, you should follow the steps as in the previous case, only in the “General” tab you need to open the “Date and Time” section.

Please note, there are two types of setting times on LG TV

The correct operation of the software depends on how correct the time setting is. In some cases, malfunctions may occur: the TV signal stops or the connection to the wireless connection disappears.

In the case of timer and stopwatch settings, everything is done individually. Therefore, it is not necessary to specially set the time period, this can be done directly during the operation of the TV.