How to record video from ipad screen

Table of Contents

How to record iPad screen with SOUND

Screen video recording using iOS

Starting with iOS 11, a built-in function for recording screen video appeared on the iPhone and iPad, however, a novice owner of an Apple device may not even notice it.

To enable the function, use the following steps (remember, you must have iOS version 11 or higher).

  • Go to Settings and open the “Control Center”.
  • Click “Customize Controls”.
  • Pay attention to the list ” controls”, there you will see the item “Screen recording”. Click the plus sign to the left of it.
  • Exit the settings (press the “Home” button) and drag the bottom of the screen: in the control center you will see a new button for screen recording.

By default, pressing the screen recording button starts recording the screen of the device without sound. However, if you use a strong press (or long press on iPhone and iPad without Force Touch support), a menu will open as in the screenshot, in which you can enable sound recording from the device’s microphone.

After the end of the recording (performed by pressing the record button again), the video file is saved in.mp4 format, 50 frames per second and stereo sound (at least on my iPhone this is the case).

Below is a video instruction on using the function, if something remains incomprehensible after reading this method.

For some reason, the video recorded in the settings was out of sync with the sound (accelerated), so I had to slow it down. I assume that these are some features of the codec that could not be successfully digested in my video editor.

How to Record iPhone and iPad Screen Video on Windows 10, 8 and Windows 7

Note: to use the method, both the iPhone (iPad) and the computer must be connected to the same network, it does not matter via Wi-Fi or using a wired connection.

If necessary, you can record video from the screen of your iOS device from a Windows computer or laptop, but this will require third-party software that allows you to receive broadcast via AirPlay.

I recommend using the free program LonelyScreen AirPlay Receiver, which can be downloaded from the official website http://eu.lonelyscreen.com/download.html (after installing the program, you will see a request to allow it to access public and private networks, you should allow it).

  • Launch LonelyScreen AirPlay Receiver.
  • On your iPhone or iPad connected to the same network as the computer, go to the control point (swipe from bottom to top) and click “Screen Repeat”.
  • The list will show the available devices that can broadcast the image via AirPlay, select LonelyScreen.
  • The iOS screen will be displayed on the computer in the program window.

After that, you can record video with the built-in Windows 10 screen recording tools (by default, you can call the recording panel with the WinG keyboard shortcut) or using third-party programs (see Best programs for recording video from a computer or laptop screen).

ways to record video from iPhone and iPad screen

If you need to record a video from the screen of your iOS device, there are several ways to do this. And one of them, recording video from the iPhone and iPad screen (including with sound) on the device itself (without the need to use third-party programs) appeared quite recently: in iOS 11 there was a built-in function for this. However, in earlier versions, recording is also possible.

This manual describes in detail how to record video from the iPhone (iPad) screen in three different ways: using the built-in recording function, as well as from a Mac computer and from a PC or laptop with Windows (i.e. the device is connected to a computer and already on it records what is happening on the screen).

Screen Recorder in QuickTime on MacOS

If you own a Mac computer, you can use the built-in QuickTime Player to record video from your iPhone or iPad.

  • Connect your phone or tablet with a cable to your MacBook or iMac, if necessary, allow access to the device (answer the request “Trust this computer?”).
  • Launch QuickTime Player on your Mac (you can use Spotlight search for this), and then, from the program menu, choose File. New Video.
  • By default, webcam recording will open, but you can switch the recording to the mobile device screen by clicking on the small arrow next to the record button and selecting your device. There you can also select the sound source (microphone on iPhone or Mac).
  • Click the record button to start recording your screen. To stop, press the “Stop” button.

When you finish recording your screen, choose File> Save from the QuickTime Player main menu. By the way, in QuickTime Player you can also record Mac screen, for more details: Record Mac OS screen video in QuickTime Player.

Distribution of new, sometimes interesting and useful materials from the remontka.pro website. No ads and free computer help for subscribers from the author. Other subscription methods (VK, Odnoklassniki, Telegram., YouTube, Yandex.Dzen)

How many minutes can you record? Recorded the screen for 1 hour 50 minutes, and the recording did not come.

I don’t know for sure, but Google suggests that someone wrote down for two hours, i.e. most likely rests on the availability of free space on the device (sort of like 1 GB for 4-6 minutes, depending on the resolution)

Hello! I am making a screen recording with sound. Everything is preserved. Then I want to send via WhatsApp, telegram or email. it is sent without sound. Tell me, what is this problem and how to solve it? Thank you!

Identical problem. It would be interesting to understand why this is happening.

Thanks a lot! I used to look and did not understand how people do this, but now I understood Thank you!

Very cool site, helped me figure out everything that interested me, explained everything verbatim, thanks!)

Dear admin, thanks for the useful info! Tell me which iPhone model is the article talking about? I would like to know which iPhone writes stereo sound

Hello. I tested it all on an old iPhone 6 Plus. There were definitely two audio tracks, but now I can’t say for sure whether they are different or not (in my opinion, yes).

Can Track iPhone Screen Recording If I Record?

Hello. Didn’t quite understand your question.

Good day. As soon as I turn on Sound Recording, the sound in the video is muffled (very much to barely audible). During playback, noise and sounds from the outside are heard, and the sound from the video is almost inaudible. What could be the problem?

Hello. Do you want to record a video with sound that is playing on your phone right now? He can’t do that. And when you turn on the sound recording, he writes from the microphone and mutes the playback sound, and what appears on the recording is what “got” into the microphone. In general, it’s not easier to download a finished video somewhere without recording from the screen?

Hello. On this program from the iPhone The maximum video recording time is 2 minutes. Why is that? I would like to record a video up to 20 minutes long.

Perhaps these methods and computer recording will work?. https://remontka.pro/mirror-iPhone-screen-pc-mac/

Thank you very much, otherwise you will look at these paid applications, plus everything with their cosmic-ebical prices. Thank you for such people

Cool, thanks for the tips, in general I really like your portal, everything you need and to the point.

ITools instruction

Completely free utility available to every owner of Apple gadgets. But it’s difficult to talk about quality here, so this option is definitely not suitable for the gameplay. All captured videos will be automatically moved to the document folder.

  • Load a file manager called iTools.
  • Connect iPad (iPhone) to PC via USB and launch iTools.
  • Next, open the “Tools” tab.
  • There is a button here called “Live Desktop”.
  • A window will be loaded, where there will be a corresponding button by recording.

Simple and affordable method, but not distinguished by special quality.

QuickTime instruction

QuickTime is the best option for recording high-quality video footage. It is this program that is free for the Mac owner. will allow you to get the highest quality pictures from iPad and iPhone.

  • We connect the gadget to the Mac. using the USB cable.
  • Downloading QuickTime.
  • Go to the “File” menu and select the “New entry” item.
  • The program interface to the left of the recording start button provides the ability to select devices. Click on the checkbox and look for a mobile gadget. There will also be an opportunity to determine the source of the sound recording.
  • We start recording by pressing the corresponding button.

Everything is simple and requires only 5 steps, and as a result, you get a high-quality video from the iPad and iPhone screen.

AirServer Instruction

This option is slightly worse than the previous one, because it can offer a lower quality video. At the same time, the program is free for only a week and this version cannot offer built-in video recording functionality. If you use the free version, there will be a watermark on the bottom right, and the purchase will cost 14.99.

  • Loading AirServer (Mac / Windows).
  • We launch the downloaded program and to use the test period without payment for 7 days there is a “Try” button.
  • Then we turn to the “apple” gadget to the “Control Center”, where there will be “AirPlay”. Here, in the list of possible devices, the PC name will be located.
  • As soon as the “Replay” is activated, AirServer will start broadcasting the screen of the mobile device.
  • We use ODS. Fraps or CamStudio for recording, because the shell in the free modification has no built-in utilities.
READ  How to take a screenshot of the screen on 5 iPhone

This is an alternative option for capturing images from iPad and iPhone. slightly more demanding.

Reflector 2 Instruction

Also a paid program with a trial, when all captured videos will have a watermark. Video quality is average, and the free period is limited to 7 days at a cost of 14.99.

  • Download Reflector 2 (Mac / Windows).
  • Launch the downloaded shell and click “Try Reflector 2”, if you need to use the free version.
  • Then we use the iPad (iPhone), where you should go to the “Control Center” and find “AirPlay”. The name of the PC should be displayed here in the device list.
  • The screen broadcast will appear immediately after activating “Video Replay”.
  • Click the button with the name “Record” located on the top right.

Another option for recording images from iPad and iPhone screens. but is able to show itself well only when buying.

How to record video from iPad and iPhone screen

Some users wonder how to record video directly from iPad and iPhone screen. If earlier to solve such a problem it was required to jailbreak Apple gadgets, today there are several options for recording video from the screen without this procedure. Popular methods include:

  • QuickTime,
  • AirServer,
  • Reflector 2,
  • iTools.

All of these methods work without jailbreak, so now let’s look at the step-by-step steps for each of them.

Conclusions on recording video from the iPad or iPhone screen

In modern conditions, this is absolutely not a difficult task that does not require special knowledge and skills. It is enough to download the program you like and configure the interaction of the gadget with the PC, and then it’s a matter of technology.

Using iRec

This iPad screen recorder can be downloaded from the Emu4ios repository located on the emu4ios.net domain. The name of the utility is iRec, but it is important to note that it only works on devices with a jailbreak.

The program works very simply: after installation, as shown in the screenshots below, you go into the application, there are settings and a “Start Recording” button, so this should not confuse you. The only drawback is that the program only works with iOS 7 and 8.

For Mac owners

The most convenient and simplest way is to record through the standard Mac OS player. Quick Time Player, since this method does not require any money or additional downloads, it is enough to have a computer (it is required under the Mac OS operating system), a cable (original or Made for iOS) and, actually a tablet.

The algorithm on how to record video from the iPad screen is as follows:

  • Connect iPad to PC.
  • Go to Quick Time Player.
  • At the top in the “File” tab, click “New video”.
  • Next, a control point will appear, there we click on the arrow and select “iPad” in the drop-down list.
  • After that, an exact copy of what is happening on your tablet will appear on the screen, and you can start recording by pressing the red button. Finish it. exactly the same way.

Jailbreak is also an option

At the moment, the percentage of people who jailbreak i-devices is very small. But for those who did it, there are two tweaks for capturing video from the screen. paid Display Recorder (5) and free Record My Screen.

How to record video from iPad screen

Sometimes it becomes necessary to record a video, so the owners of apple tablets ask how to take a video from the iPad screen. This process used to be quite complicated. How to do this today, let’s try to figure it out in this article.

Recording methods

Today there are applications with which you can easily make a recording. paid and free. Let’s dwell on some of them.

The target audience

First of all, video recording from the iPad screen is interesting for video, techno and Apple bloggers, because it is often these people who shoot video game reviews for Apple, test new versions of iOS operating systems, record training videos and life hacks. However, this topic may also interest an ordinary user for informational purposes.

This raises some difficulties. They are connected with the fact that Apple prohibits taking video from the screen of their devices. It is for this reason that you should not contact the App Store.

Via Reflector

Let’s move on to the paid option. Reflector. The principle of operation of this utility is very simple: install it on a PC, Mac or Android, then after downloading you can transfer the picture to the selected device using Wi-Fi using AirPlay. The price of the issue is 15, which is not so little.

We’ve covered easy ways to capture video from iPad screen. We hope each user finds the best one for himself. We are ready to answer your questions in the Комментарии и мнения владельцев.

How to record video from iPhone or iPad screen

The need to record a video from the screen of your iPhone or iPad may appear for every user. What to do in this case? Which application or utility should you use? We will tell you about the four most popular ways to record video from the iPhone and iPad screen in this tutorial.

Not so long ago, jailbreak was required to record video from the iPhone or iPad screen. At the moment, this opportunity is available to all users of Apple mobile devices, without exception, and it does not matter whether you use a PC or Mac.

Reflector 2

Price: Free for seven days, then 14.99

Download and Install Reflector 2 for Windows or Mac

Run the program and in case you want to first try it for seven days, click “Try Reflector 2”

On your iPhone or iPad, open Control Center, click AirPlay and select the name of your computer that appears from the list of available devices

Set the “Replay” switch to the active position. Immediately after that, Reflector 2 will start working and open a window with the broadcast of the screen of your iPhone or iPad

Click on Record in the upper left corner to start recording

Compared to iTools, Reflector 2 captures the screen of iPhone and iPad much better, however, the program has its disadvantages. The main one is the price. The free version of Reflector 2, alas, will only work for seven days, and this week, when shooting video from the iPhone or iPad screen, a huge watermark will “show off”.

iTools

Connect your iPhone or iPad to your computer with a USB cable and launch iTools

Go to the “Tools” tab

Click on the “Live Desktop” button

In the window that opens, click on the record button and start capturing the screen of your mobile device

There are two points worth making about iTools and its function of recording the iPhone or iPad desktop screen. First, the utility saves the captured videos to the document directory by default. Second, you shouldn’t expect good quality shooting from iTools. This method is not at all suitable for recording gameplay.

AirServer

Price: Free for seven days, then 14.99

Download and Install AirServer for Windows or Mac

Run the program and if you want to first try it for seven days, click “Try”

On your iPhone or iPad, open Control Center, click AirPlay and select the name of your computer that appears from the list of available devices

Set the “Replay” switch to the active position. Immediately after that, AirServer will start working and open a window with the broadcast of the screen of your iPhone or iPad.

Use Fraps, CamStudio or OBS to record video from your computer screen. Unfortunately, in the free version of AirServer, the built-in function of recording video from the iPhone and iPad screen does not work.

We decided to write separately about AirServer because the quality of shooting is higher than that of Reflector 2. In this case, we will have to put up with other disadvantages: only seven days of free work, a small watermark in the right corner, lack of a built-in recording function.

QuickTime

Price: Free, for Mac owners only

Connect iPhone or iPad to Mac with USB cable

Launch QuickTime Applications

In the “File” menu, select “New video”

Click on the checkmark located to the left of the start recording button and select your mobile device from the list that opens. Here you can select the sound source

Click on the record button

The QuickTime method for recording iPhone or iPad screen on Mac is considered to be the best because the video quality is truly excellent.

Please rate 5 stars at the bottom of the article if you like this topic. Subscribe to us Telegram. In contact with. Instagram. Youtube.

Top 1: Apeaksoft iOS Screen Recorder

Apeaksoft iOS Screen Recorder. one of the most professional iPad screen recorders that you can record gameplay, video, audio, photos, music, documents and any other data on your iPhone, iPad or iPod.

Mirror your iPhone, iPad or iPod content on the big screen in real time with no lag.

Record live content from iPad such as video, gameplay, audio, etc.

Supports all iPhone, iPad and iPod touch models.

Allows you to use a projector and share your device’s screen with others.

How to Record iPad Screen in iOS 14/13

Are you still using QuickTime to record iPad screen? While iOS 11 introduced a built-in iOS screen recorder for easy video and audio recording. As for the case, you can create a video tutorial, capture gameplay, record music, and get online video.

If you are not familiar with the processes of recording iPad screen with this default iPad screen recorder, you can find the detailed process in this article. Of course, you can also find other 4 screen recorder apps for iPad to achieve the goal easily. Read the article to find out more about the useful information now.

IPad 4 Screen Recorder Apps You Should Know

IPad Screen Recorder in iOS 11/12 as a built-in screen recorder still has some drawbacks. So we need to find some more iPad screen recorder apps to get more screen recorder options. We recommend four excellent iPad screen recorder apps for screen capture in iOS 11/12.

Recommendation: Record iPad Screen on Windows or Mac

If you want to record video or audio to your computer, the powerful Screen Recorder will definitely be your best choice. It will capture exactly the original image and sound quality. Find out more details in this part.

  • Apeaksoft Screen Recorder provides a professional way to record any activity on PC / Mac and take screenshots.
  • Capture any video from YouTube, DailyMotion, Vimeo, Vevo, RED. Yahoo and others.
  • Record microphone or system sound according to your needs.
  • Take screenshots however you want and make drawings on the picture.
  • Save captured video, audio and image in any commonly used format.

Download for WinDownload for Mac

How to enable iPad screen recording in iOS 11/12

Compared to iOS 10, iOS 11/12 has a new feature for screen recording. Screen Recorder in iOS 11/12 allows you to record and annotate videos or screenshots on the iPad screen, instead of taking a boring screenshot and editing it in digital ink.

How can you use iPad screen recorder in iOS 11/12? Here are detailed instructions on how to record iPad screen in iOS 11/12 using iPad’s built-in screen recorder.

If you are just upgrading to iOS 11/12, you should set up iPad recording before the recording screen in iOS 11/12. Click on “Settings” on the iPad screen, then you can find “Control Center” in the dropdown list. Select it to select Customize Controls. You can find the “Screen Recorder” button and then click the green plus icon on the left.

READ  Is it possible to install whatsapp on iPad

When you click the “Screen Recorder” button in the Control Center, the recorder will start working. After starting the recording process, the status bar at the top of your iPhone or iPad will turn red. If you want to record your voice, you should have a recording control window to select the microphone icon.

Step 3: Finish iPad Screen Recording in iOS 11/12

Tap the red bar at the top of the screen when you want to end recording. Or you can press the Home button to reopen the screen recording and then select the Stop tab to stop recording. You can watch this recorded video in the Photos app.

Top 2: Screenflow

Screenflow has a unique feature that allows you to record first and then customize. This feature makes this screen recorder more flexible and convenient when recording iPad screen in iOS 11. Next are the pros and cons of this iPad screen recorder.

Screen capture, video recording from connected cameras, audio recording with in-system compatibility, as well as from external devices.

Pay a lot to get full access to this screen recorder.

No built-in templates and asset library system.

It does not provide a free update service.

How to Record iPhone and iPad Screen Video on Windows 10, 8 and Windows 7

Note: to use the method, both the iPhone (iPad) and the computer must be connected to the same network, it does not matter via Wi-Fi or using a wired connection.

If necessary, you can record video from the screen of your iOS device from a Windows computer or laptop, but this will require third-party software that allows you to receive broadcast via AirPlay.

I recommend using the free program LonelyScreen AirPlay Receiver, which can be downloaded from the official website http://eu.lonelyscreen.com/download.html (after installing the program, you will see a request to allow it to access public and private networks, you should allow it).

  • Launch LonelyScreen AirPlay Receiver.
  • On your iPhone or iPad connected to the same network as the computer, go to the control point (swipe from bottom to top) and click “Screen Repeat”.
  • The list will show the available devices that can broadcast the image via AirPlay, select LonelyScreen.
  • The iOS screen will be displayed on the computer in the program window.

After that, you can record video with the built-in Windows 10 screen recording tools (by default, you can call the recording panel with the WinG keyboard shortcut) or using third-party programs (see Best programs for recording video from a computer or laptop screen).

How to record video from ipad screen

If you need to record a video from the screen of your iOS device, there are several ways to do this. And one of them, recording video from the iPhone and iPad screen (including with sound) on the device itself (without the need to use third-party programs) appeared quite recently: in iOS 11 there was a built-in function for this. However, in earlier versions, recording is also possible.

This manual describes in detail how to record video from the iPhone (iPad) screen in three different ways: using the built-in recording function, as well as from a Mac computer and from a PC or laptop with Windows (i.e. the device is connected to a computer and already on it records what is happening on the screen).

Screen Recorder in QuickTime on MacOS

If you own a Mac computer, you can use the built-in QuickTime Player to record video from your iPhone or iPad.

  • Connect your phone or tablet with a cable to your MacBook or iMac, if necessary, allow access to the device (answer the request “Trust this computer?”).
  • Launch QuickTime Player on your Mac (you can use Spotlight Search), then choose File> New Video from the program menu. When you finish recording your screen, choose File> Save from the QuickTime Player main menu. By the way, in QuickTime Player you can also record Mac screen, for more details: Record Mac OS screen video in QuickTime Player.

On iOS 11 or later and iPadOS, you can record screen and audio on iPhone, iPad, or iPod touch.

Screen video recording using iOS

Starting with iOS 11, a built-in function for recording screen video appeared on the iPhone and iPad, however, a novice owner of an Apple device may not even notice it.

To enable the function, use the following steps (remember, you must have iOS version 11 or higher).

  • Go to Settings and open the “Control Center”.
  • Click “Customize Controls”.
  • Pay attention to the list ” controls”, there you will see the item “Screen recording”. Click the plus sign to the left of it.
  • Exit the settings (press the “Home” button) and drag the bottom of the screen: in the control center you will see a new button for screen recording. By default, pressing the screen recording button starts recording the screen of the device without sound. However, if you use a strong press (or long press on iPhone and iPad without Force Touch support), a menu will open as in the screenshot, in which you can enable sound recording from the device’s microphone.

After the end of the recording (performed by pressing the record button again), the video file is saved in.mp4 format, 50 frames per second and stereo sound (at least on my iPhone this is the case).

Below is a video instruction on using the function, if something remains incomprehensible after reading this method.

Screen capture

Open the Photos app and select the saved screen recording.

Some programs may not allow audio recording.

How to record a screencast to GIF

The DU Recorder application will help you create GIF-animation from the recorded screencast. After downloading the program from the App Store, launch it, provide access to “Photos” and allow sending notifications.

According to the instructions from the beginning of the article, add “Screen Recorder” to Control Center, then in the DU Recorder menu, click “Record GIF”.

Open Control Center, press hard on the screencast button, select “DU Recorder” and click “Start Broadcast”.

At the right time, stop broadcasting in a convenient way, after which a notification will pop up that the recording is complete.

The created GIF animation will be displayed in the DU Recorder in the “Video” section, and will also be saved to the Camera Roll.

Recording video from the iPhone screen using iOS

Although the feature is implemented on devices with iOS 11 and 12 out of the box, capturing video from the display is not included in the list of options that are displayed by default in Control Center. Therefore, first you need to activate the corresponding button in the settings.

To do this, open the Settings app, select Control Center and click Customize Controls.

Under Controls, click the plus sign to the left of Screen Recording. The option will immediately move to the “Enable” list and begin to appear in the Control Center.

By keeping your finger on the icon to the right of Screen Recording, you can move the item, thereby changing the location of the button in the Control Center. You can also remove unnecessary functions from the panel by clicking on the “minus” to the left of the corresponding element, and confirming with the “Delete” button.

record, video, ipad, screen

Now, to start shooting, swipe up from the bottom of the display (on iPhone X, XR, XS and XS Max, swipe down from the top right) and click on the record icon.

To shoot a video with sound, forcefully press the button and turn on the “Microphone” in the window that appears. Then click “Start Recording”.

A timer will start, which will count down for 3 seconds, after which video capturing starts. At the time of shooting, the status bar will glow red. On iPhone X, XS, XS Max and XR, only the time in the upper left corner is highlighted in red.

To stop recording, open the Control Center and click the button again, or click on the status bar and select “Stop”.

A third method is also available: press the touch button hard and click “Stop Recording”.

Screen mirroring in iTools

The function of recording an image from the screen is also in the well-known utility iTools. This is a paid, more functional alternative to iTunes. The trial version of the program has restrictions on file transfer and video capture from the display. Therefore, to unlock the desired function, buy a license or use an activator. The latter can be found on the internet.

Then connect iPhone to PC via USB. When prompted “Trust this computer?”, Select “Trust” and enter the passcode for the device.

Open iTools, go to the “Toolbox” tab if English is installed and select “Screen mirroring” (“Real-time Desktop”).

To start shooting, click on the red round button. Select the resolution, video quality and folder where to save the recording. Then click “OK”.

Screen capture starts. To pause recording, click on pause, and to stop recording, click on the gray square.

If you left the default settings, the files will be saved in the “Videos” folder.

How to take video from the iPhone and iPad screen

Only in iOS 11, it became possible to record video with sound from the iPhone screen without using third-party programs. But solutions are also available for previous versions of iOS: using a computer or using a special application for iPhone and iPad.

The video capture feature works in iOS 11 and 12, which are supported by most Apple mobile devices. If your gadget runs on iOS 10 and older, you will have to use third-party software. about this in the second and third sections of this manual.

Useful materials for Apple technology owners:

Capturing video from the iPhone screen on iOS 7, 8, 9 and 10 without a computer and jailbreak

For older iPhones running iOS 10 and below, the AirShou program has been created, which can capture video from the display without jailbreak and computer.

To download the app, go to https://iemulators.com/airshou and scroll down to the app description. Click “AirShou” → “Install” → “Install AirShou” and select “Install” in the pop-up window.

The utility will load and its icon will appear on the desktop.

But AirShou will not start until you designate the developer of the program as trustworthy. To do this, go to “Settings” → “General” and open “Profiles and device management” (the item may be called “Device management” and “Profiles”).

Select a developer, click “Trust” China Mobile Group Heilongjiang Company Limited “and confirm by clicking” Trust “.

After the performed actions, AirShou will start working. Now run the program and allow sending notifications. Then click “Agree”.

In the main application window, select “Record”. Next, enter the name of the future video or leave the field empty. then the file name will be set automatically.

Also select the orientation: porter or landscape, and set the resolution in which the video will be recorded.

Click Next and give AirShou access to the microphone.

Now bring up Control Center by swiping up from the bottom edge of the display and click on the AirPlay Replay button. Select “AirShou (Device Name)” from the list of available devices and recording will start.

To stop capturing video from the screen, open AirShou and press “Stop”.

How to take a video from the screen using a computer program

For Windows, several programs have been developed with which you can capture video from the iPhone screen. They are paid, but trials are available with some restrictions. For example, Wondershare iOS Screen Recorder displays the program logo over the video recording. The LonelyScreen AirPlay Receiver utility is also paid, but in the trial version there is no reduction in functionality and a watermark overlay, so we recommend using it.

READ  When you turn on the computer, a black screen and beeps

Go to the official website and click on the “Download for Windows” button. Download the installation file and then install the program. When you run the utility for the first time, the Windows Firewall window will appear. allow LonelyScreen to communicate in private and, if necessary, in public networks.

Connect your computer and iPhone to the same network. On your smartphone, expand Control Center by swiping up from the bottom edge of the display (on bezel-less iPhones, swipe down from the top-right edge). Click on the “Screen Mirroring” button (“AirPlay Video Mirroring” in iOS 10 and below) and select “LonelyScreen”.

The image from the iPhone screen will be broadcast in the program window on the computer. To start recording, open the options panel and click on the red button “Start recording”.

To stop recording, in the LonelyScreen window, click on the “Stop recording” button. Or, in Control Center on iPhone, select Screen Replay and tap Stop Replay.

To view the captured video, click on the green “Play” button. To go to the location of the file, click on the folder icon. By default, recordings are stored in the “This PC” → “Videos” directory.

If the display does not start recording

When you added the screencast button, clicked on it, the timer started, but after the countdown, the shooting did not start. do the following:

  • On iOS 11: Go to Settings → General → Restrictions, enter the Restrictions passcode, and activate Screen Recording under Game Center.
  • On iOS 12: Go to Settings → Screen Time → Content & Privacy, enter your Screen Time passcode → Content Restrictions → Screen Recorder and select Yes.

Other ways

There are other equally functional utilities available for Windows and macOS. For example, Reflector and AirServer can broadcast (and record) an iPhone display to a computer using AirPlay or Screen Repeat. Both utilities are paid, but have trial versions. For smartphones that have been jailbroken, the Display Recorder tweak is suitable. And Mac users can record video from the screen of mobile devices using the standard QuickTime software (iPhone connects to PC with a Lightning cable).

Home / How To / How to Record iPhone and iPad Screen Video with Sound

Complete Guide: How to Record Audio on iPad with Voice Memos

The easiest way to record audio on iPad. This is a use Voice Memos app that comes pre-installed on Apple iOS 11. As the name suggests, the built-in Voice Memos app lets you record any sound you want to keep right on your iPhone. This could be a lecture at school, a voice-over, an interview for a project, or something else.

Rename Audio Voice Memos on iPad and iPhone

If you don’t like the name you gave your original recording, or you couldn’t come up with one at the time, you can always go back and change it.

record, video, ipad, screen

Step 1 Presentation Voice Memos app from your home screen Utilities folder.

Step 2 Press the entry you would like to rename.

Step 3 The file name can be changed by touching the file name in the upper right corner.

Step 4 Enter a new name, After completing the input, click the button to close the keyboard or click somewhere else, the file name will be saved automatically. You can rename any entry, for example, at any time.

How to Record Audio on iPad

Record audio on iPad. not a very difficult job. This task can be easily accomplished with a few simple steps.

record, video, ipad, screen

Step 1 Presentation Voice memos of the application from your Home screen. It may still be in the Utilities folder if you haven’t moved it.

Step 2 Click the Record button. It’s a big red circle.

Screen Record iOS. How to Record Your iPad Screen

Step 3 Click the button in the lower left corner to pause the recording. After the recording is paused, press the button at the bottom center of the screen will play the audio that was recorded but not saved.

Step 4 Click on the time on the timeline or drag the beep and click REPLACE overwrite audio after this point in time.

Tips: If the dubbed audio exceeds the length of the already recorded audio, recording will continue until the red play button in the lower right corner is pressed.

Step 5 Click CONTINUE to continue recording the audio you want. Click Finish when you’re done Then the recording will appear in the list above the recording tab.

How to listen to an existing voice memo on iPad and iPhone?

You can listen to all the recordings you make right in the Notes Voices app.

Step 1 Presentation Voice memos of the application from your Home screen. It may still be in the Utilities folder if you haven’t moved it.

Step 2 Press the Voice Recorder you would like to listen to.

Step 3 Press the play button.

Delete Audio Voice Memos on iPad and iPhone

There are many ways to delete an entry. Here we show you the fastest way.

Step 1 Presentation Voice Memos App from your Home Screen.

Step 2 Click the entry you would like to delete.

Step 3 Click the Delete button in the upper right corner of the entry. This trash can.

Deleted entries will appear in the Recently Deleted folder and stay there for 30 days, so if you delete something by accident, you can restore it there.

You can also delete multiple entries by clicking Edit in the upper right corner of the screen, selecting the entries and clicking Delete.

Edit Audio Voice Memos on iPad and iPhone

In addition to replacing clips in a recording, we can also delete the entire length of a file or delete an audio fragment in a file.

Step 1 Under Voice Memos on the left side of the screen, click on the entry you want to edit.

Step 2 Click Edit in the upper right corner of the screen.

Step 3 Click the crop icon in the upper right corner of the editing screen.

Step 4 Press and hold either the start or end of the recording and then the road start or end point at the desired location.

Step 5 Click the Finish or Delete button at the bottom of the screen, the selected clip will be saved or deleted.

Step 6 Click Discount Then Click Finish.

How to record games on iPad via Mac connection

This is one of the most user-friendly and easy-to-use solutions for beginners. Follow these easy steps to start your iPad screen recording gameplay:

Step 1 First of all, you need to connect your portable devices like iPod, iPad and iPhone to your Mac with a lightning cable.

Step 2 Now launch your QuickTime application on Mac.

Step 3 Go to the Submit option and then click the Record new movie option.

Step 4 This will soon open a recording window on your device’s screen. use the little arrow to open the drop down MENU and then select iPad.

Step 5 In case you also want to capture audio information, you need to select Little iPad.

Step 6 Hit the recording and then start the game you want to record.

Step 7 When your game comes to an end, click on Stop and save the video to a specific location.

Step 8 Everything is now ready and you can share your recorded videos across different platforms.

All three of these gameplay recording methods work without jailbreak on iPad, so they are suitable for all crazy gamers.

Although there are a number of applications and software tools available over the Internet.

How to Record Gameplay on iPad with ReplayKit

ReplayKit: for recording or streaming video from the screen, as well as audio from the app and microphone.

With the ReplayKit framework, users can record games to the iPad, as well as audio from the app and microphone. They can then share their recordings with other users via email, Messages, and social media. You can create app extensions to stream your content live to sharing services. But please note that ReplayKit is not compatible with AVPlayer

It is not possible to record all games on an iPad with ReplayKit, but the good news nonetheless is that it can work with most popular games. If you want to know if your particular game supports ReplayKit or not, ten prefer to check its details in the App Store. To record your game with ReplayKit, you need to follow these steps:

Step 1 Open your game that supports ReplayKit.

Step 2 Search Screen Recording This function is usually indicated by a camera or video icon and displayed on the main screen.

Step 3 You have to click on this Screen Recording icon to record gameplay on iPad.

Step 4 When your device prompts you to start recording your game, click the Screen Recording button. In case it supports audio recording from an external microphone then you can choose this option.

Step 5 It’s time to play your game.

Step 6 Once your game is over, you must click the Stop button to stop recording.

How to Record Games on iPad Using Screen Recorder

Apple introduced a built-in recording feature for iOS devices in its iOS 11 update. Since then, people have been using Screen Recording The feature has proven to be very useful for iOS users. However, there are still people who don’t know how to record gameplay on iPad.

When recording gameplay on iPad, below are the steps to record games on iPad.

Head over to Settings Customize Controls Control Center.In Control Center find the Screen Recording option and click the Add button before that.

Return to the home screen and launch the Control Center by swiping up from the bottom of the screen and tap the Record button. The recording will start and just start playing the game you want.

When the game is over and you want to stop recording, press the Red status bar and a message will appear. Click Stop from the pop-up reminder options and the video will be saved to Photos.

[Simple Methods] How to Record Gameplay on iPad with Ease

For a great iPad experience, gamers often want to record and share that joy with their game friends, and even want to share it on a social platform. There are also players who want to record time with friends.

At this time, how to record games on iPad? The article below will help you learn about 3 proven methods for recording gameplay on iPad. Keep reading, you will soon be able to share your customized game videos online.

This article contains information on a few basic ones that anyone can use with ease. Recorded video games can be shared with friends via various social networks.

Surprisingly, recording games on your computer is as easy as recording gameplay on your iPad. You can quickly fix the problem by installing FoneLab Screen Recorder.If you want to know more about recording games on your Mac, you can turn to the best game screen recording software.

FoneLab Screen Recorder allows you to capture video, audio, online tutorials, and more on Windows / Mac, and you can easily resize, edit video or audio, and more.

  • Record video, audio, webcam and take screenshots on Windows / Mac.
  • Preview data before saving.
  • It’s safe and easy to use.

You can let us know in the Комментарии и мнения владельцев below if you still have any suggestions and tips.

BICBON.COM 2021