How to remove password when logging into iPhone

How to disable password when logging into Windows 10 and what to do if it doesn’t work

remove, password, logging

Quite often, after installing the Windows 10 operating system, users complain about the need to enter a password each time they turn on the computer, which is not always convenient. Unfortunately, the developers from Microsoft did not provide a convenient way to disable this function, so you cannot disable the password entry in the obvious ways. you need to dig deeper. Fortunately, it is not at all necessary to be a programmer, since the manipulations are extremely simple. even an inexperienced user can remove the password when entering the system. This is exactly the password that appears when you turn on the computer.

How to disable password in Windows 10

To disable the password when logging into the Windows 10 operating system, the user needs to change the account settings. Fortunately, this method involves only three steps.

    Press the Windows R key combination on the keyboard, enter the netplwiz command in the line that appears, and then click OK.

Difficulties and mistakes that can be faced

After these manipulations, the item “Require username and password” in the profile settings menu will appear.

Why remove the password prompt when turning on PC on Windows 10

The use of a password on a computer is necessary if its contents need to be protected from access by third parties. For example, in educational institutions, offices and enterprises, even at home, if access to a PC needs to be limited. On the other hand, if you are the only user at the computer, or you simply do not need to protect access to the PC from anyone, then the need for a password disappears. over, in some situations, the password entry window not only takes time, but also does not allow using the common scenario “pressed the PC power button. went away on business. returned, and the computer is already fully loaded and ready to work”.

Unfortunately, Microsoft does not plan to make a convenient interface for disabling password entry yet. for the first time, the questions “how to disable password entry in Windows 10 when turning on the PC” or “how to remove the password on Windows 10″ appeared back in 2017, but to this day users need to go to the registry editor or open the profile settings menu. This is a very unobvious path that simply won’t work out through trial and error. On the other hand, according to the guide above, in just a minute or two, a user, even with a minimal set of skills, will disable the password without any problems.

Removing the administrator account password through the Settings app

Open the “Settings” application, which has the overwhelming majority of the Windows operating system resource settings in any convenient way from the many available.

For example, right-click the Start button located on the Taskbar in the lower-left corner of your desktop. Then in the pop-up menu, from the list of available options, select the “Options” section, and the application will be immediately opened.

Or click on the “Start” button and open the main user menu “Windows”. Use the slider on the scroll bar to navigate through the list and select the “Options” section you are looking for. Or, in the left sidebar of the main menu, click on the button with the gear image for direct access to the application.

You can also use the easiest and quickest way to open the Settings app. Press the “Windows I” key combination together and the application will launch instantly.

On the main Windows settings page, select the Accounts section by left-clicking it. Now, in the left pane of the new window, select the “Login Options” tab, and in the right pane, using the scroll bar, go to the “Password” section and click on the “Change” button.

User Account Control initiates the opening of the “Microsoft Account” window, which, in order to ensure system security, will require you to verify the identity of the user who has the rights to make changes to this account. Enter in the appropriate line the “PIN-code” of access set in the login parameters.

The control service will check the compliance of the entered code and display the password change window, in which you must enter your current password in the first line, and leave the “New password” line unchanged.

Click the “Next” button and follow the instructions of the system to save the changes made. When finished, restart your computer and log on to the operating system automatically without calling the “Windows” welcome screen.

How to Unlock ANY iPhone Without the Passcode

The operating system “Windows” produced by the “Microsoft” corporation is the most widespread and most massively presented software platform in the world on the computer devices of users. Windows is equipped with a variety of features aimed at ensuring smooth, error-free operation, accounting and utilization at the maximum potential of computing devices, providing an ultra-fast environment for a variety of third-party programs and applications, striving to ensure their multi-streaming use without sacrificing performance. One of the reasons why the Windows operating system, represented by both the popular versions of Windows 7 and Windows 8, and the latest version of Windows 10, which has collected all the best and most popular functions, is leading among users and occupies a significant market share digital software, is a good and friendly user interface of the system. From the first steps when starting the Windows operating system on a personal computer or other computing device, the system tries to identify the user, offering him to use the user’s credentials, respectively specified during installation or during the subsequent configuration of the operating system, by launching a pre-filter when the system is started directly, called the Windows welcome screen.

This screen forces the user to enter their own password each time they log into the operating system, which allows them to be identified, protects the system from third-party unauthorized access by unwanted users and applies appropriate permissions and permissions to various applications and system services “Windows”.

The welcome window in the Windows operating system appears in automatic mode if a user account contains a passphrase or a personal computer device is shared by several users at once, using their own unique credentials to log on to the system.

A consistently pop-up welcome window can increase user fatigue, distract them from immediate actions, and reduce overall performance. Therefore, users often tend to disable the Windows welcome screen, especially when a personal computer or laptop is used for personal purposes by one user, or the accounts of other users can be deleted, allowing them to periodically use the computer under a single owner account (for example, for members your family).

There are simple ways to achieve the desired result and disable the constant requirement to enter a user’s passphrase in the appropriate field on the Welcome page every time the Windows operating system starts up for the first time or logs in after a short absence, and force the system to boot straight away. And further in our article we will present such methods. Also, the user, if desired, can completely disable the account password in a simple way, a detailed description of which will also be presented below.

How to disable password when logging into Windows 10, 8, 7 or remove account password

Read how to disable the mandatory requirement to enter a password when booting Windows 10, 8 or 7. How to remove an account password so that Windows boots automatically, directly to the desktop without the need for additional confirmation.

A way to eliminate the need to enter a password at login by resetting it to zero

In most cases, an account with administrator rights is used to fully utilize the capabilities of the Windows 10, 8, or 7 operating system. You can remove the password for this entry, which will allow you to log out directly to the system, bypassing the welcome screen.

Warning: We strongly discourage users from deleting the password of an account with administrator rights, as this action will significantly reduce the security of the system, allow virus programs and any kind of unwanted software to freely enter the system or gain unrestricted access to it.

If this option completely suits users and the risks of infecting the system are not terrible, then the following algorithm of actions must be performed.

Note: The procedure for removing the password for an account with administrator rights in versions of the Windows operating system with and without the Settings application is different. And further we will present ways to reset the password for different versions of the “Windows” system.

How to disable the password when waking from sleep mode in the Windows 10 operating system

Open the “Settings” system application in the previously described way and go to the “Accounts” section. Then, in the left sidebar, select the Login Options section, and in the right pane, in the Login Required section, select the Never mode in the nested pop-up box.

READ  How to turn off the warning light on iPhone

Now, when you exit sleep mode, you do not need to enter the password to boot the operating system.

Also, sometimes, when users have computer-connected devices that are within the usable range (for example, connected to a computer using Bluetooth), Windows may lock up when such devices leave the connection area and require a password to be entered later. Therefore, in order to exclude such a situation, use the scroll bar slider to find the section “Dynamic blocking” and uncheck the selection indicator (“tick”) in the cell of the line “Allow Windows to automatically block the device in your absence”.

Additionally, it is worth checking the settings of the screen saver, the active position of the responsible parameter of which can force the launch of the welcome screen, followed by the requirement to enter a passphrase.

Open the Run dialog box as previously described and in the Open field enter (or copy and paste) the following command: control desk.cpl ,, @ screensaver, and then press the OK button or the Enter key on your keyboard.

This command initiates the opening of the Screensaver Settings window, in which you need to uncheck the selection indicator (“check mark”) in the “Start from the login screen” cell, and then click on the “Apply” and “OK” buttons to save the settings.

How to disable the password when waking up from sleep mode in the operating system “Windows 7”

To disable the constant requirement for a password when waking up from sleep, users on the Windows 7 operating system will need to use the Control Panel system application. Open the application window in the previously presented way, move to the bottom of the window, using the slider of the scroll bar, and select the “Power supply” section.

On the “Select a power plan” page, in the line of the plan used by the user, click on the text link “Set up a power plan”.

On the associated plan-specific settings page, click on the text link “Change advanced power settings”.

The Advanced Settings pop-up window will display all of the settings responsible for managing the computer’s power. Click on the text link “Change settings that are currently unavailable” to access the full list of settings.

Then in the main window, in the “Require password on wakeup” section, set all nested lines to “No”, and then click on the “Apply” and “OK” buttons to save the changes to the computer’s power settings.

Now the system will not require a password when exiting sleep mode and the transition to the working state will be performed automatically.

Removing the Administrator Account Password in Control Panel

In the operating system “Windows 7” there is no application for managing the basic settings “Settings”, unlike later versions, and you can remove the password from the system application “Control Panel”.

To access the “Control Panel” application, click on the “Start” button and in the menu presented, select the appropriate section in the right pane.

In the opened window of the control panel for computer settings in the upper right corner of the window in the “View” line, click on the submenu display arrow and select the “Category” section from the available options.

The way sections are presented will be changed. Select in the section “User Accounts and Family Safety”, who is responsible for configuring account settings, passwords and parental controls, the text link “Add or remove user accounts”.

In the new control window in the “Select an account to change” section, left-click on the administrator account.

On the page responsible for making changes to the marked account, click on the text link “Change password”.

The system will display the password change page containing several required fields. Fill in the “Current password” field, indicating the set existing valid password, and leave the “New password” and “Password confirmation” fields empty unchanged. Then click on the “Change password” button and the specified settings will be applied to the system immediately.

Now close the settings management window, restart your computer and make sure that you log in directly to the system without the “Windows” welcome screen.

Disable Windows 10 password prompt when waking up from sleep

To disable the password in Windows 10, when you wake up from sleep, go to the Start menu, go to Settings. In the Options window, click on Accounts. In the “Accounts” window, go to the “Login Options”.

In the “Required login” setting, the operating system asks the user: “If you are absent, after what time should Windows require you to re-enter?” By default, the “Time to wake up computer from sleep” setting is activated. Select the “Never” setting option.

After you turned off the password prompt when you wake up from sleep in Windows 10, the operating system will no longer require you to enter a password from your Microsoft account.

After rebooting, the password entry field in Windows 10 will be removed in the operating system login window.

How to disable password when logging into Windows 10

To disable the password when logging into Windows 10, you need to change the user account settings.

Press on the keyboard on the “Windows” “R” keys, in the “Run” window that opens, enter “netplwiz” (you can enter “control userpasswords2”), and then click on the “OK” button.

You can run this command in another way: enter the expression “netplwiz” in the “Search in Windows” line, and then click on “Run command”.

After that, the “User Accounts” window will open in the “Users” tab. Here you will see a list of users on this computer. Highlight the desired user if he is not alone.

Next, uncheck the box next to the item “Require username and password”, and then click on the “OK” button.

In the “Automatic login” window, enter the password for your Microsoft account, confirm the password, and then click on the “OK” button.

After applying these settings, the prompt for entering a password during the boot of the Windows 10 operating system will be removed.

Now it remains to disable password entry when Windows 10 exits sleep mode (change power settings).

How to remove password in Windows 10

When booting the Windows 10 operating system, a user with a Microsoft account must enter a password to log on to the system. This setting (password request) is performed by default to protect user data.

If unauthorized people have access to your computer, entering your Microsoft account password (formerly Windows Live) will prevent unauthorized people from entering the operating system and gaining access to user data. Therefore, keep in mind that the requirement to enter a password to log in to Windows 10 increases the security of the computer, protects against possible negative consequences.

Constantly entering a password when booting, rebooting, or waking up from sleep mode is not always justified for those users whose computers do not have access to unauthorized persons. Therefore, in this case, it makes sense to disable the password in order to use Windows 10 without a password by removing the corresponding prompt when logging in.

In this article, I will tell you how to remove the password in Windows 10 when the computer boots and when the computer wakes up from sleep mode.

Conclusions of the article

When booting the Windows 10 operating system, if the computer uses a Microsoft account, the user needs to enter the password for the Microsoft account to log on to the system. These are security requirements to protect user data from unauthorized entry into the operating system. The user can remove the prompt to enter a password in Windows 10 when turning on the computer, or when Windows wakes from sleep mode.

How to remove password when logging into Windows 10

The instructions describe several ways to remove the password when entering Windows 10 when you turn on the computer, and also separately when you wake up from sleep mode. This can be done not only using the account settings in the control panel, but also using the registry editor, power settings (in order to disable the password prompt when waking up from sleep), or free programs to enable automatic login, or you can simply delete the password user. all these options are detailed below.

In order to follow the steps below and enable automatic sign-in to Windows 10, your account must have administrator rights (this is usually the case by default on home computers). At the end of the article there is also a video instruction, which clearly shows the first of the described methods. See also: How to set password on Windows 10, How to reset Windows 10 password (if you’ve forgotten it).

There are several ways to do this, one of them, and probably the easiest one, is via the command line:

  • Run the command line as administrator (for this you can start typing “Command line” in the search on the taskbar, and when you find the desired item. right-click on it and select the menu item “Run as administrator”.
  • On the command line, use the following commands in order, pressing Enter after each one.
  • net user (as a result of this command, you will see a list of users, including hidden system users, under the names under which they appear in the system. Remember the spelling of your username).
READ  How to Reset Password on Android Huawei

(however, if the username consists of more than one word, also enclose it in quotes).

After executing the last command, the password will be removed from the user, and there will be no need to enter it to enter Windows 10.

How to remove login password using Windows 10 Registry Editor

There is another way to do the above. to use the registry editor for this, however, it should be borne in mind that in this case your password will be stored in clear text as one of the Windows registry values, so anyone can view it. Note: below we will also consider a similar method, but with password encryption (using Sysinternals Autologon).

First, launch the Windows 10 Registry Editor by pressing the Windows R keys, type regedit and press Enter.

To enable automatic logon for a domain, Microsoft account, or local Windows 10 account, follow these steps:

  • Change the AutoAdminLogon value (double click on this value on the right) to 1.
  • Change the DefaultDomainName value to the domain name or the name of the local computer (can be viewed in the properties of “This computer”). If this value is not there, you can create it (Right mouse button. New. String parameter).
  • If necessary, change the DefaultUserName to a different username, or leave the current user.
  • Create a string parameter DefaultPassword and specify the account password as the value.

After that, you can close the registry editor and restart the computer. logging into the system under the selected user should occur without asking for a username and password.

How to enable automatic login to Windows 10 using Autologon for Windows

Another easy way to disable password entry when logging into Windows 10, and perform it automatically, is the free Autologon for Windows program, which is available on the official page https://docs.microsoft.com/en-us/sysinternals/downloads/autologon.

If, for some reason, the ways to disable the password at login, described above, did not suit you, you can safely try this option, in any case, there will definitely not be something malicious in it and most likely it will work. All that is required after starting the program is to agree to the terms of use, and then enter the current username and password (and the domain, if you work in a domain, is usually not needed for a home user, the program can automatically substitute the computer name) and click the Enable button.

You will see information that automatic login is enabled, as well as a message that the login information is encrypted in the registry (that is, in fact, this is the second method of this tutorial, but more secure). Done. the next time you restart or turn on your computer or laptop, you will not need to enter your password.

In the future, if you need to re-enable the Windows 10 password prompt, run Autologon again and click the “Disable” button to disable automatic login.

Disable password prompt on login in user account settings

The first way to remove the password prompt when logging into Windows 10 is very simple and does not differ from how it was done in the previous version of the OS. It will take a few simple steps.

  • If your system is logged in not by a password, but by a PIN code, first disable them using both parts of this instruction: How to disable the request to create a PIN code and remove the PIN code in Windows 10.
  • Press the Windows R keys (where Windows is the OS logo key) and type netplwiz or control userpasswords2 then click OK. Both commands will cause the same account setup window to appear.
  • To enable automatic logon to Windows 10 without entering a password, select the user for which you want to remove the password prompt and uncheck the box next to Require username and password. If there is no such mark, the solution is described here: What to do if there is no item Require username and password in Windows 10.
  • Click “OK” or “Apply”, after which you will need to enter the current password and its confirmation for the selected user (which can be changed by simply entering another login). Attention: if you are using a Microsoft account and the method does not work, try again, but in the upper field, instead of the username, enter the associated email address (E-mail).

In case the box does not have the “Require username and password” checkbox, go to Settings. Accounts. Sign-in options and check if there is an item “Require Windows Hello sign in for Microsoft account”. If so, disable and re-enter the automatic login settings. If not, run Command Prompt as administrator (how to do it) and enter the command (by pressing Enter after it):

After executing the command, close Command Prompt and restart your computer. Then repeat the steps described above. the item to disable the password prompt should appear. Also, the “Require username and password” option will be unavailable if your computer is currently connected to a domain. However, it is possible to disable the password prompt using the Registry Editor, although this method is less secure than the one just described.

How to turn off the prompt for a password when you wake up from sleep in the Registry Editor or Local Group Policy Editor

In addition to Windows 10 settings, you can disable the password prompt when the system wakes up from sleep or hibernation mode by changing the corresponding system settings in the registry. There are two ways to do this.

For Windows 10 Pro and Enterprise, the easiest way is to use the Local Group Policy Editor:

  • Press the WinR keys and in enter gpedit.msc
  • Navigate to Computer Configuration. Administrative Templates. System. Power Management. Hibernation Settings.
  • Find the two options “Require password when waking up from sleep” (one for battery power, the other for mains power).
  • Double click on each of these options and set “Disabled”.

After applying the settings, the password will no longer be prompted when exiting sleep mode.

There is no Local Group Policy Home Editor in Windows 10, but you can do the same using the Registry Editor:

  • Go to the registry editor and go to the section (in the absence of the specified subsections, create them using the “New”. “Section” item of the context menu by right clicking on the existing section).
  • Create two DWORD values ​​(on the right side of the Registry Editor) named ACSettingIndex and DCSettingIndex, the value of each of them is 0 (it is like this right after creation).
  • Close Registry Editor and restart your computer.

Done, the password will not be asked after Windows 10 wakes up from sleep.

Method number 2 for removing the password through the registry

If, for some reason, you are unable to set up automatic login to Windows 10 by following the above method, please use this.

Step 1: Open Registry Editor. To do this, open the Run window (using the WinR keyboard shortcut), type Regedit in the available field, and press Enter. Click the “Yes” button if you see a new window asking you to make changes to the system.

Step 2: In Registry Editor, navigate to the next section:

Step 3: On the right side of the editor, find the parameter called DefaultUserName, double click on it and make sure your Microsoft account or local user account name is mentioned in the Value field.

Step 4: Next, again in the same part of the window, find the DefaultPassword parameter. If there is no entry, create it by right-clicking in an empty space, clicking the New button, and then clicking on String Value. Rename it to DefaultPassword and enter the password in the Value field. Click OK.

Step 5: Finally, you need to enable automatic login. To do this, in the same part of the editor, find the entry with the label AutoAdminLogon, and then change its value from “0” (zero) to “1” (one).

All! Restart your computer to try Windows 10 by automatically signing in to your account without prompting for a password. Without a doubt, initially it is better to try the first method in action.

How to remove password when logging into Windows 10?

Want to quickly boot to your Windows 10 desktop without skipping the login screen? Want to avoid entering your account password every time you turn on your computer? You can easily disable your login password and set Windows 10 to automatically boot to your desktop or Start screen without entering it.

READ  How to remove dark theme on iPhone

The main advantage when logging in without a password is that the account does not require you to enter it, which means you do not need to remember it and spend a few seconds while loading. That is, Windows 10 will start the desktop a couple of seconds faster. But, on the other hand, remember that it is much easier to access a PC without a password (for example, children).

The procedure for setting up automatic login in Windows 10 is very similar to the same operations in Windows 7 and Windows 8. Therefore, some of the screenshots were taken in Windows 8.1. This method applies to both a local account and a Microsoft account. In other words, you can use this instruction, regardless of the type of account.

Warning: enable automatic login only if you are the only PC user. If the computer is used by other people (and children), it is best to keep accounts under lock and key.

You can follow one of the methods below to enable automatic login to Windows 10 without entering a password.

Method number 1 for automatic login without entering a password

This is the easiest way to remove the password from the Windows 10 login screen.

Step 1: Open the Run window by pressing WinR (Windows logo key and R key) at the same time. In the dialog box, type Netplwiz and then press the enter key.

Step 2: This will bring up the “Accounts” dialog box, select a user account, and then uncheck the “Require username and password” option. Click the “Apply” button, then the “Automatic login” window will open.

Step 3: In the automatic login dialog, enter the password, re-enter it to confirm, and click “OK”.

Step 4: Make sure the check mark is gone. You can try to reboot the system to check the effect.

Important

What services can be safely disabled in Windows 10

Yandex browser

The Internet browser from Yandex is made on an identical engine to Google Chrome, but we will consider this example for completeness. Indeed, there are significant differences in the interface between the creation of Google and Yandex Browser.

    At the top of the browser, click on the icon with three stripes located horizontally to enter the program settings.

In the menu that appears, select the column “Password Manager”.

Hover the mouse pointer over the line with the Odnoklassniki website address and put a tick in the small field on the left.

  • At the bottom appears the “Delete” button, which we press. Your account in OK has been removed from the browser.
  • Mozilla Firefox

    The Mozilla Firefox browser is the most widespread in the computer world among free software of this kind, and if you log into your personal page on Odnoklassniki through it, then to remove the password you should follow the instructions below. By the way, in this way you can delete any codeword from any login saved by this browser.

    In the drop-down list of parameters, click LMB on the “Settings” line and move to the section we need.

    In the browser settings, move to the “Privacy and Security” tab. There we will find what we are looking for.

    Now we see all the accounts of various sites saved by our browser. First, turn on the display of passwords.

    We confirm in a small window your decision to turn on the visibility of passwords in the browser settings.

    We find in the list and select the column with your profile data in Odnoklassniki. We complete our manipulations by clicking on the “Delete” button.

    Forgot Your iPhone Passcode? Here’s How You Can Regain Access!. XS/XR/X/8/7/6

    Opera

    If you use the Opera browser to surf the web on the endless expanses of the global network, then to remove the password when entering your personal Odnoklassniki profile, it is enough to perform simple manipulations in the program settings.

      In the upper left corner of the browser, click on the button with the program logo and go to the “Configure and manage Opera” block.

    We find the item “Settings” in the menu that opens, where we go to solve the problem.

    On the next page, expand the “Advanced” tab to find the section we need.

    In the list of parameters that appears, select the column “Security” and click on it LMB.

    We go down to the section “Passwords and Forms”, where we see the line we need to go to the store of browser codewords.

    Now, in the “Sites with saved passwords” block, look for data from Odnoklassniki and click on the “Other actions” icon on this line.

  • In the drop-down list, click on “Delete” and successfully get rid of unwanted information in the memory of the Internet browser.
  • Google chrome

    If Google Chrome is installed on your computer or laptop, then removing the password when entering Odnoklassniki is also quite simple. Just a few clicks and we are there. Let’s try to solve the problem together.

      We launch the browser, in the upper right corner of the program window, click LMB on the service icon with three dots located vertically one above the other, which is called “Configuring and managing Google Chrome”.

    In the menu that appears, click on the “Settings” column and go to the configuration page of the Internet browser.

    In the next window, click on the “Passwords” line and move to this section.

    In the list of saved logins and passwords, we find the data of your account in Odnoklassniki, move the mouse cursor over the icon with three dots “Other actions” and click on it.

  • It remains in the menu that appears to select the “Delete” column and successfully remove the password stored in the browser memory from your page in OK.
  • We remove the password when entering Odnoklassniki

    There is no doubt that the function of remembering passwords in Internet browsers is very convenient. You do not need to type numbers and letters every time you enter your favorite resource. But if several persons have access to your computer or you entered the Odnoklassniki website from someone else’s device, then the saved code word can lead to leakage of personal information that is not intended for someone else’s gas. Let’s see together how you can remove the password when entering OK using the example of the five most popular browsers.

    Internet Explorer

    If you adhere to conservative views on software and do not want to change the good old Internet Explorer to another browser, then if you wish, you can remove the saved password of your page in Odnoklassniki.

      Open the browser, on the right, click on the gear button to open the configuration menu.

    At the bottom of the drop-down list, click on the item “Browser Properties”.

    In the next window, move to the “”.

    In the “Autocomplete” section, go to the “Parameters” block for further actions.

    Next, click on the “Password Management” icon. This is what we were looking for.

    In the Credential Manager, expand the line with the site name OK.

    Now we press “Delete” and come to the end of the started process.

  • We confirm the final removal of the codeword of your Odnoklassniki page from the browser autocomplete forms. All!
  • So, we have analyzed in detail the methods of removing a password when entering an Odnoklassniki account using the example of the five most popular browsers among users. You can choose the method that suits you best. And if you have any difficulties, then write to us in the comments. Good luck!

    | Contacts | Content | RSS