How to remove the screen from an acrylic bathtub

What are?

Modern manufacturers offer a wide range of products for every taste.

The types of protective panels are:

  • deaf;
  • with sliding doors;
  • with doors. accordion;
  • with hinged doors;
  • with shelves.
  • with fabric curtain.

On which option to choose, each person decides for himself. If you want to save space, you should choose the option with accordion doors that fit best into small spaces. For a comfortable location of household chemicals under the bathroom, it is better to choose a product with shelves. But blind panels are aesthetically pleasing. They are very easy to attach to the frame, but with their installation access to the plumbing line is limited, since not all models can be easily and quickly removed.

For a complete overview of all screens, see our dedicated article.

The most popular options among acrylic bathtub users are:

  • front panel.
  • solid ceramic tile screen;
  • sliding.

In our article, we will dwell on the installation of an acrylic panel in more detail, because consumers most often prefer this method of decorating the space under the bathroom.

For detailed information on installing a screen from tiles and sliding panels, see the relevant articles

The photo below shows various interesting options for decorating the space under the bathroom.

remove, screen, acrylic, bathtub

Front panel mounting

We have made a choice now we can proceed with the installation.

It should be noted right away that standard screens are sold complete with all fasteners, frames and fittings. They also come with detailed step-by-step installation instructions.

The following tools and materials are required to install the protective shield:

  • roulette;
  • marker or pencil;
  • building level;
  • screwdriver;
  • wrench;
  • silicone sealant.

How to assemble and fix the screen? Consider the step-by-step installation instructions for Triton bathtubs:

We adjust the height of the bath. In order not to have a wide gap near the floor, you need to adjust the height of the font and the front panel. We measure it with a tape measure and, using a wrench, we twist the legs.

It is very important to check the level after all the manipulations. Don’t forget to do it.

Markup. Now you need to find plastic plugs on the frame or legs, to which the screen will be attached, and mark on it with a marker the places for screwing in the screws, according to the location of the plugs.

Fastening. We attach the screen and, using a screwdriver, fix it with screws to the frame. Then we install special plugs on the screws.

It is best to seal the joint between the screen and the tile with silicone sealant so that splashes do not get there and mold does not multiply.

How to choose the right size?

Any panel for a bath is selected for a specific size. It is very important to check if it fits your plumbing model. The length of acrylic panels ranges from 120 to 180 cm for standard fonts. And the height is 55-60 cm, but it can change if there are legs.

Most often, acrylic panels come with plumbing and have the same tone as the bathroom, which makes it look organic to the overall design. They are made of plastic coated with an acrylic layer.

The advantages of the panels purchased with the hot tub include the fact that they fit as tightly as possible to the sides of the bath, saving you from non-aesthetic cracks. Experts do not recommend purchasing such screens separately, as they do not always fit exactly in size.

If the screen is purchased separately from the bathroom, then in order not to be mistaken with the choice of size, you should carefully measure the plumbing from all sides.

How to install on corner models?

For corner baths, fastening is most often provided not with self-tapping screws, but with special magnets and metal plates. These magnets are initially attached to the legs of the font.

Height adjustment. As in the case of the rectangular model, we adjust the height of the legs based on the screen parameters.

How to fix the plates? On the reverse side of the panel, in the places where the magnets will rest, glue the metal plates from the kit onto double-sided tape or silicone sealant. While drying, you can fix them with ordinary tape.

Mounting. We attach the front panel and check that the magnets grab the metal plates.

This mounting option is convenient in that the question: how to remove the screen, and then put it back on. does not arise. Everything is extremely SIMple, you need to make a little effort by pulling the panel towards you, you can just as easily return it to its place. The previous method is not so SIMple, there you will first need to unscrew the screws.

All the secrets of installing a screen on an acrylic bath. Features of mounting on rectangular corner models

Even the most stylish bathroom interior will look ridiculous if you do not close the space under the plumbing fixture. You can decorate it in different ways, but the installation of the screen is considered the best and most reliable. With it, you can not only ennoble the room, but also create a comfortable working area, hiding from prying eyes. Under such panels in the free space, you can place household chemicals, small buckets and other things.

It is worth noting that installing a screen on an acrylic bathtub has many advantages. With it, you will transform the interior of the room and create additional storage space for household chemicals. To make the bathroom more functional and aesthetic, you should take a responsible approach to the choice of the screen and carefully figure out how to best attach it.

Front panel mounting

We have made a choice now we can proceed with the installation.

It should be noted right away that standard screens are sold complete with all fasteners, frames and fittings. They also come with detailed step-by-step installation instructions.

How to assemble and fix the screen? Consider the step-by-step installation instructions for Triton bathtubs:

We adjust the height of the bath. In order not to have a wide gap near the floor, you need to adjust the height of the font and the front panel. We measure it with a tape measure and, using a wrench, we twist the legs.

It is very important to check the level after all the manipulations. Don’t forget to do it.

Markup. Now you need to find plastic plugs on the frame or legs, to which the screen will be attached, and mark on it with a marker the places for screwing in the screws, according to the location of the plugs.

Fastening. We attach the screen and, using a screwdriver, fix it with screws to the frame. Then we install special plugs on the screws.

It is best to seal the joint between the screen and the tile with silicone sealant so that splashes do not get there and mold does not multiply.

How to remove the screen from an acrylic bathtub. Correct installation of the screen under the acrylic bath

Bath screens appeared in our life for a long time. But they did not immediately become what we can see them now. Previously, the screens for the bathtub were extremely deaf, and in order to get to the communication pipes, they had to be disassembled and reassembled after repairs. It should also be noted that the blank screens did not make it possible to use the free space under the bathroom, so you had to buy additional bedside tables, and lockers that only took up space.

The screen under the bath is very easy to make with your own hands.

READ  How To Change Screen On iOS 14

How to install on corner models?

For corner baths, fastening is most often provided not with self-tapping screws, but with special magnets and metal plates. These magnets are initially attached to the legs of the font.

Height adjustment. As in the case of the rectangular model, we adjust the height of the legs based on the screen parameters.

How to fix the plates? On the reverse side of the panel, in the places where the magnets will rest, glue the metal plates from the kit onto double-sided tape or silicone sealant. While drying, you can fix them with ordinary tape.

Mounting. We attach the front panel and check that the magnets grab the metal plates.

This mounting option is convenient in that the question: how to remove the screen, and then put it back on. does not arise. Everything is extremely SIMple, you need to make a little effort by pulling the panel towards you, you can just as easily return it to its place. The previous method is not so SIMple, there you will first need to unscrew the screws.

How to install a blank screen on an acrylic bathtub

The installation of the acrylic bath screen begins with the mounting of the bracket. It should be done before the plumbing itself is put in place. The bracket is attached to the bottom of the bowl with special inserts. Then, squeeze plates are screwed to the same elements located on the sides of the plumbing, which act as fastening the screen to the acrylic bath. The plates are installed using the fasteners supplied with the decorative panel in such a way that the distance between their edge and the edge of the side does not exceed 2 mm.

Next, the bath is installed in the place designated for it. With the help of adjusting screws on the legs of the bracket, the position of the bowl is leveled, and also raised to the desired height, taking into account the dimensions of the decorative panel. Then all pipes should be connected and their performance checked. If at this stage you find that the water does not go well into the drain, check again if the bowl is level, change its slope and height.

Before fixing the screen to the acrylic bathtub, marking and fitting is carried out. Mark the centerlines of the bracket with a water-based marker or slate pencil. Lean the screen against the bowl, then slide its top edge under its side so that it falls between the side and the squeeze plate. Align the decoration panel with the centerlines of the bracket, making sure everything is level. Then, using self-tapping screws, screw the bottom of the screen to the bracket elements. The screw heads can then be closed with decorative plugs.

How to properly install a screen under an acrylic bathtub

Installation of a screen under an acrylic bathtub can be done independently, without inviting specialists for this. The main thing is to comply with three basic requirements in the process.

Firstly, the connection of the edges of the panel with the side of the sanitary ware bowl and the floor should be as tight as possible. This will prevent water from entering the joints and the development of mold and mildew in them. You can ensure tightness as follows:

  • grease the joints with silicone sealant;
  • lay a special seal around the edges of the screen.

Tip: Many interior panels have adjusting screws to adjust their height. In the absence of sealing materials, the installation of the screen on the acrylic bath should be carried out in such a way that the gaps between its edges and other surfaces are minimal. This can be achieved just by adjusting the height, choosing the desired position of the screws.

Secondly, the decorative panel, regardless of its type of design, must provide unhindered access to the pipes. If the screen for the acrylic bathtub is sliding or swinging, there will be no problems. For a blank screen, provide a removable panel located near the communications.

And thirdly, the attachment of the screen to the acrylic bathtub should be done in such a way that neither the tap nor the water pipes act as a supporting structure in it. In the models with which the plumbing is equipped by default, this situation cannot arise. But if you decide to make a decorative shield yourself, be sure to consider this point.

As a rule, the installation of the screen under the acrylic bathtub is carried out at the very last stage of the repair, when all the finishing work has already been completed. If for any reason you need to do this earlier, try to protect the decorative structure from repair dirt. To do this, wrap its doors and frame with thin cling film. It adheres well to any surface, so you don’t need tape or other fixing materials.

Installing doors on the screen

It is not difficult to make a screen under an acrylic bathtub with hinged or sliding doors. You just need to properly attach such plastic panels to the frame, which can be both cladding and doors at the same time. The rigidity of the structure is usually provided by means of polyurethane foam. It blows out all the free space that is between the side of the bathtub and the frame.

Keep in mind that a regular bathroom sealant may also work for this task. After that, the frame is reinforced with vertical posts. It is desirable that they be cut from the same profile as the frame. You can also use spacer posts, which are made from a SIMple metal pipe. Along the edges, pipes are attached to it (by welding), with ready-made threads.

If you have small children in your home, removable suction cups are a very useful tool. You can hide from them all household chemicals behind the screen doors, without fear that they will be able to find it.

As for swing doors, you can also make it yourself. As a material, not only plastic, but also drywall, MDF and even chipboard are perfect. Cutting doors of the desired size from the selected material, you SIMply attach them to the frame using hinges. A structure with swing doors can still be tiled or mosaic. In order to do this beautifully, the dimensions of the doors must be divisible by the dimensions of the tiles, so that the latter does not have to be cut.

The presented screen is perfect for a high-tech bath

We hope that our article helped you understand how you can create an acrylic bath screen yourself, and how to install it correctly. Agree, this is a very SIMple task. If you try hard, all the work can be done quickly and beautifully. The main thing is to adhere to the basic rules and be confident in your abilities. You will certainly succeed.

How is a sliding screen attached to an acrylic bathtub

With a deaf or removable decorative shield, everything is more or less clear. How to attach a sliding screen to an acrylic bathtub? In fact, the principle will be about the same.

We advise you to learn how to unclog a toilet bowl.

Read: by what means you can remove fungus in the bathroom.

Find out how to choose and install a bath siphon yourself.

The sliding top panel is essentially a frame with runners into which sliding doors are inserted. The design of this frame is made in such a way that its upper edge can be brought under the squeeze plates on the side of the bowl. The lower part of the frame, as in the previous version, is screwed to the bracket elements with self-tapping screws. Therefore, the installation order will be as follows:

  • attach the squeeze plates;
  • fix the bracket on the bowl;
  • put the bath in place, connect and check;
  • assembling a sliding screen (install the doors in the frame);
  • markup;
  • press the upper edge of the frame with plates;
  • screw the lower edge of the frame with self-tapping screws to the bracket.

As a rule, no drilling is required before attaching the screen to the acrylic bath. The self-tapping screws included in the kit cut well into the acrylic of the bowl and into the plastic of the screen without additional preparation. Therefore, all you need for installation is a level and a good screwdriver.

MDF screen

MDF boards for creating a screen for an acrylic bath are just perfect. They are quite strong, tolerate moisture well, and temperature fluctuations. The density of the material and its special impregnation do not allow mold and fungi to multiply on the MDF surface, which is also very handy.

READ  What screens are on iPhones

Assembling a MDF screen is almost the same as assembling kitchen cabinets, with the only difference that the frame and frame must be made of metal. The first, horizontal part of the frame must be fixed to the wall in height; it must be under the edge of the bath. The frame is fastened with dowels, or ordinary screws. The parts of the frame are connected to each other using furniture corners and all the same screws. When installing the front of the frame, you must consider the ability to access all communications.

Installing a screen under an acrylic bath

After the installation of the frame is completed, you just have to sheathe it with MDF plates. Experts advise to think in advance about shelves and drawers for household chemicals. They must be installed in front of the cladding. The process of installing the screen ends with the installation of doors.

Squabble

To install the screen on an acrylic bathtub, a sturdy frame will need to be made, at the ends of which stop screws are installed on the support legs.

The decorative panel is fixed to this frame using self-tapping screws or glue. You need to fill the bath with water. This is necessary to take into account the possible subsidence and more accurately determine the stop moment.

To install in place, put the finished screen over the side and, turning the screws, raise it until the upper edge rests against the shoulder.

Drain water and check if the installation is secure.

The procedure for installing a screen for an acrylic bath

There are several options for how to install a screen on an acrylic bathtub. The easiest way is to fix a blank, non-openable panel. The most robust design is required for swing doors. A purchased or self-made structure can be attached to:

  • self-tapping screws;
  • magnets;
  • springs;
  • clamps;
  • hard frame.

Sometimes you can see non-removable screens made of moisture-resistant drywall or brick and tiled. Such non-separable structures can be beautiful, but they satisfy the owners before the first breakdown of the plumbing or clogging of the siphon.

On springs

The fastening of the screen to the acrylic bathtub on springs is SIMple and reliable. Its device is based on the fact that springs are attached to the elements of the bath support frame, which will lift the screen, pressing it against the stiffener. The work is performed in the following sequence:

  • lead the screen over the side and lift it up until it stops;
  • mark the lower level of the panel on the frame racks;
  • transfer the marks 30 mm higher;
  • attach the lower part of the spring to the new marks and then the top will show the place on the rack for drilling a hole for the hook;
  • on the back of the screen, glue a piece of angle with a drilled hole for the hook of the lower part of the spring;
  • glue wooden blocks to the side wall of the bathtub, which will not allow the panel to move towards the bowl;
  • install the springs, press the screen down, put the top over the side and release.

The dimensions of the bars must be selected experimentally, taking into account the thickness of the panel material.

How to install a screen on an acrylic bathtub?

On magnets

In order for the magnets to firmly hold the decorative panel, it is necessary to have a steel frame or vertical stops that are connected to the supporting structure of the bath. The magnets themselves must be glued to the back of the panel and then attached to the installed steel profile. To finally fix the screen, 2-3 clamps should be screwed to the tub’s stiffener.

Screen removal instructions

The way to quickly remove the decorative panel depends on the way it is fixed. If no supporting elements are visible in the gap near the floor, then the screen is installed on self-tapping screws, magnets or springs. The presence of the legs indicates that the structure is installed on the spine. The absence of a gap indicates that the panel is held in place by clips and snaps. Having learned the mounting method, you can remove the screen from the acrylic bath and keep it intact.

The plugs will tell you about the presence of self-tapping screws. They must be removed with a thin sharp knife and unscrewed with a screwdriver or screwdriver all installed screws. The absence of plugs does not always mean the absence of mounting screws. A good craftsman can create inconspicuous decor using a quality sealant. You can find self-tapping screws with a small magnet that sticks to steel caps.

If there are no covers or feet, then SIMply pull the panel down. If the applied force is not enough, in addition to the magnets, additional latches were used for installation. In this case, pull the top of the panel towards you, and after snapping it off. down to unfasten the magnets.

The screen installed on springs must be pulled down and the panel removed from the side. After that, it remains only to disconnect the springs with hooks.

To remove a structure mounted with a swivel, twist the support legs until the top edge extends over the side. After that, the panel itself will fall into your hands.

When installing on clips, first you need to pull the upper edge of the panel towards you, and after disconnecting the latches and bringing the screen out of the side, raise it up

Self-tapping mounting

To fix the decorative screen on self-tapping screws, you will need a set of special fasteners. These can be pieces of plastic or aluminum corner. They need to be fixed at the top on the stiffening rib of the acrylic bathtub, and at the bottom on the racks of the support frame or horizontal profile, if any.

After installing the mounts, attach the shield and mark against each of them.

Drill holes in the panel in the marked places and with a tapered crown or a large-diameter drill select a sweep for the caps of the screws.

Screw the hardware to the fasteners, and install decorative plugs in the notches of the caps. If you could not find the plugs on sale, then you can cut them yourself and put them on glue.

Acrylic bath screen selection criteria

The decorative screen is a rigid structure made of sliding, hinged or stably fixed panels. It is installed on the front side of the bathtub and can be fixed in various ways. There are a large number of possible design options and therefore, when making a decision, you need to remember the following basic requirements for the screen device:

  • exact correspondence to the size of the bath;
  • expansion of functionality with the possibility of hidden storage of household chemicals, materials or other items;
  • durability while maintaining its original appearance;
  • affordable cost of a finished product or materials for making a screen with your own hands;
  • the complexity of the installation work;
  • ease of maintenance and convenient use.

The type of construction and beautiful appearance depend only on the opinion of the apartment owners. Some people like sliding systems, others like sash, and some believe that the panel should not open at all.

Clips

Floor spring clips are used for rounded or asymmetrical bathtubs. In addition to the clamps, you need retaining latches to get the job done. The procedure for this mounting method is as follows:

  • using a plumb line or bubble level, mark the floor with a line corresponding to the edge of the bath rim;
  • place corner clamps on the floor along the drawn line and mark the places for drilling;
  • drill holes in the floor, install the clips and fix them on the dowels;
  • screw the latches to the stiffening rib of the bath opposite the clamps;
  • on the back of the panel, mark the locations of the clips and screw the fastening tongues there;
  • install the bottom of the screen into the clamps, and press the top of the screen firmly against the board, until it clicks.

The main thing in this method is not to be mistaken with the markup in order to ensure that all the fastening elements match.

READ  Ntoskrnl exe blue screen how to fix

Removing the sealant from the acrylic bath

Each of us has a bath or shower. And sooner or later you will be faced with the question of replacing plumbing silicone (sealant) with new glue, dismantling the bathroom, or SIMply bringing beauty to life after repairs. Therefore, you are faced with the question of removing the sealant. And as practice shows, it is not always possible to solve this problem quickly and easily.

The sealant itself is a very strong material that has a high degree of adhesion to all kinds of materials and weakly comes into contact with solvents or chemicals. It is because of this that it is used as a sealant in bathrooms. But for the same reason, then removing the silicone sealant from any surface will be an extremely difficult operation, for which you will need the use of special tools.

This removes the sealant from different materials in different ways so as not to damage the surfaces. If you do not want to waste time and are not ready to pay a lot of money for calling a master from the company, it is better to carefully read this article.

A common problem in the bathroom is removing sealant

Challenge and solution

Finishing work is the final stage of any renovation. Any recommendation is to use a silicone sealant when sealing cracks in the bathroom. But at the same time, few people say how to properly spend it, so that you have as little of it as possible on the surface of the bath or walls, since then you will have to clean it up. And since the sealant has high adhesive properties, you will have to sweat thoroughly.

Nowadays, you just need to enter into the search bar on the Internet the query. “sealant removal” and you will open many pages where you will be assured that this method will quickly and efficiently remove the sealant from the acrylic bath. But, as practice shows, not everything is gold that glitters. Therefore, we asked for advice from experienced specialists who have performed SIMilar procedures more than once or twice, and this is what they recommended:

  • Removing the sealant mechanically. To do this, you need a regular razor blade. Apply it to the surface of the acrylic bathtub and lightly cut off the rest of the sealant. over, you have minimal chance of scratching any bathroom, including acrylic. The only thing that you should pay special attention to is that you do not cut your hands yourself. Use a brush to brush away the remaining silicone. Stationery or sharp construction knife. This is if you do not have a blade in your house. In this case, you do not immediately cut off all the sealant, but act gradually, cutting off layer by layer. Do not try to peel off the sealant, otherwise you will remove it along with the piece of acrylic bathtub to which the silicone glue is firmly adhered. In this case, haste can cost you dearly. So please be patient and have some free time. Note that silicone is more difficult to cut than acrylic. The first is best removed using other means.
  • Removing the sealant with chemicals. First, we are talking about solvents. Such as Lugato, Quilosa, Penta-840, CRC Gasket Remover and others. Many people advise using Dow Corning OS-2. They come in the form of liquids, aerosols or pastes. The way to use liquids is very SIMple: you apply it to the sealant, it softens and can be easily removed. If you decide to use aerosols, then stock up on gloves and a protective mask. Shake the can and apply it to the bath surface. And after 20 minutes you can remove the sealant by wiping the surface with a napkin. Or if there is something else left, then use a spatula.

The sealant can be removed with a variety of solvents

To avoid damaging the acrylic bath, apply a small amount of solvent to the surface where it will be least noticeable in case of an unexpected reaction of enamel or paint to the drug. In general, when a solvent enters the sealant, it either turns into a kind of slurry or softens, which in any case makes it easy to remove it from the surface of the bath.

Secondly, you can use white spirit, especially since it is inexpensive. To get started, you will need to cut as much of the sealant as possible with a knife or blade, and then rub white spirit into this area using a soft cloth. After a while, the glue will soften and you will gently remove it with a wooden scraper without damaging the bath surface.

If you have to dismantle the acrylic bath, and not just remove a couple of drops of sealant, then here we are talking about the complete removal of the old glue and placing new sealant in its place. Then you have to do the following:

  • First, peel off the tub tray. Since the sealant has strong bonding properties, you will have to sweat. In addition, it is advisable for you to have an assistant for these works. To get started, try to pick up a thin layer of silicone with a construction knife and using a screwdriver, pry the bathtub in several places. When the bath gives in, move it away from the wall.
  • Begin cleaning the tiles and bathtub surfaces from the old sealant. Making circular movements with a cloth soaked in solvent, remove the silicone, and at the end of the work wipe the pallet with a dry cloth.
  • After completing all of the above, apply a coat of new silicone sealant to the tile and pallet surfaces and reinstall the acrylic bathtub in its original location. If there are gaps or gaps somewhere, treat them with a sealant too. Clean up any residual glue immediately so that it doesn’t dry out and you don’t have to start over.

Other surfaces

The acrylic bathroom seems to be sorted out. But what about other surfaces on which silicone sealant remains?

To clean the glass surface, you have three options:

Also works great with white spirit sealant

Here’s what you can do to clean ceramic tiles:

  • Cut as much of the silicone sealant off the tile as possible, but be careful not to damage or scratch the tile. Then, using a soft cloth dipped in gasoline or white spirit, rub the product into the remaining glue. When it has softened, use a wooden scraper to remove any remaining sealant. When using a scraper, do not use excessive force to avoid damaging the ceramic tile.
  • You can rub the kerosene into the sealant until the glue softens and takes a long time to remove. A liquid solution can be used instead of kerosene, although it will last longer. You decide.
  • You can use solvents Penta-840 or Silicon-Entferner. But before starting the full-scale work, check if your ceramic tiles are resistant to them, otherwise you can damage the ceramic surface and it will crack and harden.

You can remove the sealant from the countertop by the following means:

  • If the sealant has not completely dried, then you can remove the sealant from the tabletop using gasoline. Apply a little product to it, and when it softens, remove it with a cloth.
  • If the sealant is still frozen, cut off as much of it as possible with a sharp knife or razor. Then apply the detergent to it until it is completely softened and remove with a wooden scraper.
  • If you decide to use modern solvents on the surface of the countertop, then carefully read the instructions so as not to damage the material from which it is made.

You can also cut the sealant with a clerical knife.

Now you have absolutely complete information on how to remove silicone or acrylic sealant, both from the surface of an acrylic bathtub and other materials.

Finally, I would like to once again draw your attention to the fact that when removing the sealant from the acrylic bath, use sharp objects carefully so as not to damage (scratch) its surface. And after you have cut off most of the sealant, feel free to apply white spirit, detergent or Dow Corning OS-2. In any case, you will be happy with the result.

BICBON.COM 2021