How to set a password on Samsung A 10
All Ways to Get Back Deleted Messages on Android Phone
One of the functions of a smartphone is messaging. This is possible both with built-in programs and in messengers. Users often delete important information by mistake. They wonder if the data can be recovered. It is worth contacting the experts and find out how to get back deleted messages on your Android phone.
Android Data Recovery
This application is mainly suitable for Windows. It has simple, but at the same time, rich functionality. To work with it, you first need to enable USB debugging:
- Go to settings, scroll down and click on the “About device” section. Then select “Build number”. 2 seconds pass and the mode is activated. If it is already on, a corresponding notification will be displayed.
- Open the settings again and go to “Developer options”. Then enable USB debugging.
Android Data Recovery software needs to be downloaded to PC. After connecting the smartphone to the computer using a cable, enable USB mode. You must allow the program to access data on Android.
- wait 10-20 minutes while the program scans text and media files;
- select a section with messages from those that appear on the screen;
- mark the necessary ones;
- click on “Recover”.
Android Data Recovery software for SMS backup on smartphone
Using a computer
You can make a backup in two ways: on your phone and on your computer. These methods are not much different from each other. They are based on the same principle. There are applications that scan the device. They perform detailed analysis and find out where the erased messages are.
Important! PC recovery is suitable for those who cannot download programs to their phone. For example, if the RAM is clogged or there is not enough space on the SD card.
It is worth exploring all possible programs. It is possible that a certain application will be easier to use than others. The simpler the interface, the faster you can recover SMS and media files.
Dr. Fone Android Data Recovery
The program is used in different ways depending on which phone it is installed on:
- Android version 3 and below. First click on “Settings” and then on “Applications”. A window will appear in which you need to check USB debugging. If it is not activated, you need to turn it on with one click.
- Android 4. The steps are the same as in the previous case. But you need to click on “Developer options” instead of “Applications”.
- Andriod 1 and up. Open the settings and select the “About phone” section. Click on the item “Developer code” several times. A notification should appear stating that the mode is activated.
Using the Dr. Fone Android Data Recovery to Recover Messages
The following utilities are considered the best for data recovery:
- GT Recovery. Like any other program, download through the Play Store. Open and select the desired section with SMS. Select the category “SMS Recovery”. You need to choose which memory will be scanned: internal or external. It is advisable to check the box next to the last option. A lot of data is stored in the internal memory of the smartphone.
- SMS BackUp. This app is for messages only. It is convenient because ROOT rights are not required. That is, you can use the program immediately after downloading. With its help, you can not only make a backup, but also prevent the loss of information. Files are saved in XML format.
Adding an account password in Settings
- Go to Start. Settings (gear icon on the left side of the start menu).
- Select “Accounts” and then. “Login Options”.
- In the “Password” section, if it is absent, you will see a message stating that “Your account does not have a password” (if this is not specified, but it is proposed to change the password, then the next section of this instruction will suit you).
- Click “Add”, enter a new password, repeat it and enter a password hint that you understand, but cannot help outsiders. And click “Next”.
After that, the password will be set and will be requested the next time you log into Windows 10, exit the system from sleep, or lock the computer, which can be done with the WinL keys (where Win is the key with the OS logo on the keyboard), or through the Start menu. click by the user icon on the left. “Block”.
A quick way to set a password to log into Windows 10
If you are using a local account and have not yet set a password for it, you can use the following simple method to set it up in the latest versions of Windows 10:
- Press CtrlAltDelete keys
- In the menu that appears, select “Change password”
- In the next window, do not fill in the “Old password” field (if it is not there), but set a new password and confirm it.
- Click the arrow to the right of the password confirmation field.
Done, now the login password for your user will be set.
How to enable Windows 10 password if its request has been disabled
In cases where you are using a Microsoft account, or when using a local account, it already has a password, but it is not prompted for, it can be assumed that the password prompt when logging into Windows 10 has been disabled in the settings.
To turn it back on, follow these steps:
- Press WinR keys on your keyboard, type control userpasswords2 and press Enter.
- In the User Account Control window, select your user and check the box “Require username and password” and click “OK”. You will also need to enter your current password to confirm. Attention: a separate instruction on what to do if there is no item Require username and password to be entered.
- Additionally, if you have disabled the password prompt when you wake up from sleep and you need to enable it, go to Settings. Accounts. Login Options and on the right, in the “Required login” section, select “When the computer wakes up from sleep mode”.
Additionally, pay attention to the following nuance: the latest versions of Windows 10, during installation and updating, may prompt you to set a PIN and use it to log in instead of a password. This is where the instruction How to remove the Windows 10 PIN may come in handy.
How to set a password on Windows 10
In this instruction, step by step on how to set a password on Windows 10 so that it is requested when you turn on (log in), wake up from sleep, or lock. By default, when installing Windows 10, the user is asked for a password, which is subsequently used to log in. Also, a password is required when using a Microsoft account. However, for a local account it can be omitted (leave blank), and for a Microsoft account. disable the password prompt when logging into Windows 10 or set a PIN instead of a password (however, this can also be done when using a local account).
Next, we will consider various options for the situation and ways to set a password for entering Windows 10 (by means of the system) in each of them. You can also set a password in the BIOS or UEFI (it will be asked before logging in) or install BitLocker encryption on the system drive with the OS (which will also make it impossible to turn on the system without knowing the password). These two methods are more complicated, but when using them (especially in the second case), an outsider will not be able to reset Windows 10 password.
Important note: if your Windows 10 account uses an account named “Administrator” (not only with administrator rights, but with this name), which does not have a password (and sometimes you see a message that some application does not can be launched using the built-in administrator account), then the correct course of action in your case would be: Create a new Windows 10 user and give him administrator rights, transfer important data from system folders (desktop, documents, etc.) to the folders of the new user, and then disable the built-in account, which was written about in the material Windows 10 built-in administrator account.
Setting a password for a local account
If your system uses a local Windows 10 account, but it does not have a password (for example, you did not set it when installing the system, or it did not exist when upgrading from a previous OS version), you can set a password for the user in several simple ways.
Setting an account password using the command line
There is another way to set a password for your local Windows 10 account. using the command prompt. For this
- Run the command line as administrator (use the right click on the “Start” button and select the desired menu item).
- At the command prompt, type net users and press Enter. You will see a list of active and inactive users. Pay attention to the name of the user for whom the password will be set.
- Enter the command Where username is the value from item 2, and password is the desired password to log into Windows 10) and press Enter.
Done, just like in the previous method, it is enough to lock the system or log out of Windows 10 so that you are prompted for a password.
How to put password on gallery, SMS and any other applications in Android
It often happens that your phone is used not only by you, but also by your friends or relatives. After all, if you have a Galaxy S6, then everyone wants to “touch” it :). And on your phone you have personal SMS, and photos in the gallery may be such that others cannot watch them. Therefore, many users need to block some functions of their Android smartphone for others.
A wonderful program called Smart Applock will help us with this. There are other programs, but it is Smart Applock that is the most advanced, and also has a free version. You can download it in the Play Market.
Instructions on how to set a password for any application in Android:
- Launching Smart Applock.
- In the upper right corner, click on the plus sign
- Check the boxes to mark the required programs and click on the “Save” button.
- We draw a pattern for you, confirm it again.
- In the dialog box, click on “No” (or “Yes” if you are afraid to forget your password)
Everything. Now, to enter the applications you marked, the person will need to enter the pattern.
Updated on 2015.02.06: The 2nd version of this application has been released and now it is called Smart AppLock 2 (App Protect). Compared to the first version, the protection algorithms have been completely redesigned, and a number of new features have been added:
- Block incoming calls
- Set special passwords for social networking applications: Instagram and others
- Blocking Google Play and installing \ uninstalling programs from children
- New design inspired by Android 5.1 Lollipop
- Other possibilities
How to prevent someone from uninstalling Smart AppLock?. Open the application, go to settings and enable the “Set as device administrator” function. Enter password. Now, to remove our utility, you will need to enter this password.
I forgot password. How can I recover it? When you set passwords for the first time, the program asked you which method of password recovery you would like to choose: “Secret question” or “E-mail”. If you enter the password incorrectly 3 times, then at the bottom you will see the “Recover password” button. Click on it, and select the desired method. If you chose the 1st option, then enter your security question. If the second. check your mail, within 5 minutes you should receive a backup password for recovery.
How to put an app password on Honor or Huawei?
If you often pass your smartphone into the hands of another person, it makes sense to take care of setting a password for some applications. of course, if there is a need for this, and as practice shows, such a need arises very often. We will tell you how to “screw up” the application on an Honor or Huawei smartphone.
Open “Settings” using the application on the desktop. If there is no inscription on the application, then look for this gear:
In the menu go to the section “Security and privacy”.
On the next page, find the line “App Lock”.
And select the applications that you want to block. move the switch opposite their name.
In the example above, we have set a password for the Gallery app. Go to the desktop and click on the icon.
The system asks to enter the code that was specified earlier. If Fingerprint Unlock is installed, you can use the scanner.
You can remove the password from the application in the reverse order.
Friends! If our site helped you or you just liked it, you can help us develop and move on. To do this, you can:
- Subscribe to our YouTube channel.
- Subscribe to our group.
How to Lock Gallery on Samsung Galaxy Smartphone
The easiest way to secure the data stored in the gallery, as well as prevent unauthorized launch of programs, is with the help of free applications from Google Play. They do not require rooting the smartphone and, as a rule, offer several information protection algorithms at once. First of all, you should pay attention to:
- Smart Lock;
- App Protector;
- Smart AppLock.
The optimal balance of safety and ergonomics is provided by a four-digit code, the repetition of which will unlock the functions of the gadget.
A four-digit code is easier to remember and faster to enter than a pattern.
Lock Apps on Samsung Galaxy
Modern smartphones of the Samsung Galaxy line are a symbol of quality and reliability. They are designed not only for communication, but also for creating, storing and processing huge amounts of information. Most often, its leak is undesirable and unsafe, and we are not even talking about media files and personal correspondence, but about passwords, keys of bank cards and payment systems. Many users are worried about how to block the gallery and other applications on Samsung Galaxy.
Setting up protection
To set up protection in the Smart Lock app, just follow these steps:
- Type “Smart lock” in the Google Play search bar and follow the first link. Google Play will offer several options for apps with blocking features
- Press the “Install” button. On the Smart Lock setup page, you can read additional information on the application.
- Read the list of required permissions, and then click the “Accept” button. Wait for the download and installation of the application. To install the application, you must consent to its access to information
- Launch the application with the “Open” button or the icon in the menu. After downloading the application, it can be launched from the same page
- Enter your PIN. The default PIN is “0000”
- Select a security question and enter your answer. The control answer to the question will be required to recover the password
- The settings menu will open. Having selected the Smart Lock item, you should turn on the toggle switch in the upper right corner. Smart Lock will need access to your data usage history to work
- Back in the menu, click on the “” icon to select the applications you want to password protect. For example, you can block Google Chrome. Tick it off. With Smart Lock, you can lock any applications, folders, galleries on your smartphone
- Done, the application is locked. By clicking on it, you can configure additional protection settings. When trying to log into Google Chrome, information about its blocking will now be displayed
Working in other applications is not much different from the considered algorithm and will not be difficult for Samsung Galaxy users on Android 4.1 and higher. Difficulties can arise only on Galaxy S1, S2 and single-platform devices running on Android 2.3. In this case, it is worth looking for old versions of applications on third-party resources, for example, trashbox.ru.
Some recent OS builds allow you to block applications directly from the settings menu. To do this, just select the “Security” item and find the “Applications” column in it. In any case, one should not ignore the issue of information security in the era of cybercrime. We hope our tips have helped you secure your gadget.
How to set a password on Samsung A 10
If earlier, in order to install a SIM card in a smartphone, it was necessary to remove the back cover and remove the battery, now everything is a little different. phones are becoming thinner, and manufacturers are trying to make their cases (conditionally) not collapsible. How to insert a SIM card into Samsung and start using your mobile device fully?
At the moment, in almost all modern smartphones, the installation of SIM cards and memory cards is very similar to each other.
Installing a SIM card
The first thing to do is to find on the device case the cover of a special tray located on one of the side faces.
As a rule, it is placed on the left and equipped with a special hole for the “key”. Some smartphones have two trays at once, but most mobile devices have one at a time.
Even a simple needle or paper clip can act as a “key” (which comes with a smartphone), because all you need is to insert it into the hole in the tray and easily push it inside. This will allow you to open the tray, which you then need to gently pull out with your fingers.
- for one SIM card;
- for two SIM cards;
- one hybrid tray (in which you can install two SIM cards or one SIM card together with a memory card);
- two trays (one for SIM cards, and the other for a memory card);
- two trays (one for a SIM card, and the other for a SIM card and memory card).
For example, the Samsung Galaxy A6 smartphone has two trays, where one holds a nanoSIM SIM card, and the second holds another SIM card and a microSD memory card.
You need to try very hard to install the SIM cards incorrectly, since they have a special bevel (“key”, “guide”) at one of the corners and somehow other than correct, they do not allow the SIM card to enter the slot. The same goes for the memory card.
After the SIM cards are installed in the slots, carefully insert the tray (or trays) into place and press them against the body until they are completely closed.
If everything is done according to the instructions, the signal levels of mobile networks will be displayed in the status bar, and information about the memory card connection will appear in the notification panel.
What to do if Samsung does not see the SIM card?
Sometimes there are situations when Samsung does not see the SIM card. In this case, the problem may lie in the improper installation of the SIM card (for example, when cutting it yourself), a problem with the SIM card itself (the microprocessor is out of order, mechanical damage), the SIM card does not comply with the standards of the networks supported by the smartphone, or the SIM card has expired.
In some cases, this can be observed on old SIM cards when operators move from 3G networks to 4G coverage.
In any of the options, the most correct solution would be to replace the SIM card with a new one at the center for working with clients of your mobile operator.
How to View Saved Wi-Fi Passwords on Android and iOS
I like working in cafes, especially those with free Wi-Fi. There is nothing better than working with a little white noise around me and writing with a hot cup of coffee next to me. For this reason, I have saved the Wi-Fi passwords of many cafes in my area. However, sometimes you do not go to these places alone, but accompanied by friends who may also need access to Wi-Fi. If you have a laptop with you, it’s not that hard to get it to show passwords, but on a phone it’s not that simple. And the chances that our phones will be with us are significantly greater than our laptops.
Ask the barista. always an option, but why bother them when you can get it from the phone itself. It is also a useful method because it can come in handy in many other situations where you desperately need the password of a Wi-Fi network that you previously connected to over the phone.
Before we get started, it’s important to make it clear that this process only works on Android and iOS devices with rooted and hacked access, respectively (the part about it’s not that easy on phones).
How to set pattern password in Samsung Galaxy A10
It is not possible to obtain Wi-Fi passwords without administrator access, as this information is stored in the system folder of the device. If you haven’t rooted your Android yet, you should check out our collection of Android rooting messages and decide for yourself. For iOS users. our selection of hacking. Yes, we are so platform independent.
With that out of the way, let’s see how we can get passwords. We will first see the process for Android and then move on to iOS devices.
Show Wi-Fi password on Android using apps.
On Android, there are dozens of apps available to view or display WI-FI password, like WI-FI password key, WI-FI password recovery, Show WI-FI password and Mant You can try any of them, but all of these apps require Root.access.
Best app for finding WI-FI password. “WI-FI Password show”, this application is available for free on Google Play. And this application is only for finding the saved password of the wifi network.
Get WI-FI password Show. (This is a mirror app. The original WI-FI Password Show app was removed from the Play Store. But this app works exactly the same.)
Download and install this app from Google Play and give ROOT access and it will show you all saved WI-FI network passwords under WI-FI name.
Retrieving Wi-Fi Passwords on Android
Since we will have to open the system file on Android, we cannot use the traditional file manager that is preinstalled on the device. We will be using ES File Explorer for this task. We have already seen a guide on how to use ES File Explorer to view and edit system files on Android. Please take a look at it if you are not aware of the process.
Now move the folder up (to the root folder) in ES File Explorer and you will see a directory named data. Go to the data / misc / WI-FI folder. and you will find a file called wpa_supplicant.conf. Click on a file to open it and make sure you use the built-in Text Viewer / HTML ES File Explorer for this task.
In this file, you should see the SSID of the network and their passwords next to it. Now you can find the SSID (network name), write down the password next to it and close the file.
Make sure you are not editing the file. otherwise, you may have problems connecting to Wi-Fi. The Play Store has a certain number of apps for this task, but it’s better to use this manual method to get passwords than to install this adware crap.
Let’s now see how we can get passwords on an iOS device.
How to show Wi-Fi password on Android phone without ROOT.
On Android devices. We all use many Wi-Fi networks in many places, cafes, gym, home, friends’ house. Every time we enter a Wi-Fi password, the Android device saves it. And we know it’s hard to remember all WI-FI passwords. Sometimes the Wi-Fi network started to fail (Internet stopped working) and we need to forget the Wi-Fi network option to fix this problem. Viewing your saved Wi-Fi password in Windows 10 is easy, but if you don’t have a computer and the only source to display your Android Wi-Fi password.
But as with Windows, you cannot view or show Android Wi-Fi password. Sometimes we want to share our WI-FI network with our second device. But if you do not remember the password and you do not have a computer, then you are out of luck.
Android does not provide any official way to find WI-FI password on Android. But with some apps and some interesting ways, you can view the WI-FI password. In this article, I am going to provide all possible and working ways to recover or show WI-FI Android password.
Show Wi-Fi password on Android phone. without ROOT.
For the most part, the method is only for the rooted device. Because Android has a lot of hidden features and things that you can only do after rooting. If you have your own Wi-Fi network (home WI-FI network), you can easily find the Wi-Fi password.
Note. This method will only work if your primary Android device is connected to this wireless network.
Please check which wireless router you are using first, I am using TP-Link. So I am going to open TP-Link admin panel. If you do not know the name of the wireless router or this is the website for accessing the settings.
Then enter one of the following addresses 192.168.1.1 / 192.168.0.1 in your Android browser. It will now ask you for a username and password, luckily all wireless routers come with a default username and password which is
Username. Admin Password. Admin
your wireless router, you can do a lot of things like block MAC address, change Wi-Fi password, control bandwidth and more. Go to Wireless Wireless Security. Here you can see the saved Wi-Fi password without rooting the device.
How to view the password from WaiFay without ROOT
First, let’s look at an easy way to find out the password from WaiFay on a Samsung phone without jailbreaking the smartphone and obtaining Superuser rights.
How to view the key in Samsung from the public network?
Fans of Internet surfing are often interested in where to see the password from WaiFay, if you do not know it (on Samsung). As a rule, the question concerns public networks, where no one hides the keys for connecting to WI-FI. To obtain information of interest, you can use one of the following programs:
How to find passwords for Wi-Fi networks You have connected your Android device to “Android :: Gadget Hacks
In the process of owning an Android device, you’ve likely connected to dozens of Wi-Fi networks. School, home, work, gym, home of your friends and family, cafes. every time you enter one of these Wi-Fi passwords, your Android device saves it for safe and easy future access.
The problem occurs when you really want to see the password for one of the networks you connected to. Perhaps you want to connect a second device to a saved Wi-Fi hotspot, or maybe you are with a friend who wants to log in to the same hotspot. access. But without the ability to access the real passwords stored on your device, you’re out of luck.
How to Add Lock Screen in SAMSUNG Galaxy A10. Set Up Screen Lock / Password / Passcode
Fortunately, there are ways to get around this. If you’re using Android 10 or higher, you can see Wi-Fi passwords right in your phone’s settings. However, if you are using Android 9.0 Pie or earlier, please note that you will need to root.
Samsung Galaxy A10s A10. How To Set App Lock and Hide
Go to the section: Instructions for Android 10 | Manual for Android 4.4-9.0
How to Remove PIN Lock from Samsung Galaxy
8-800-555-55-55 0-88-55-55-555 0-800-05-555 8-10-800-500-55-500 0-800-555-555 7799 8-10-800- 500-55-500 9977 00-800-500-55-500 0-800-614-40 22-667-400 8888 8-10-800-500-55-500 7799 00-800-500-55-500 0.800-502-000
For information on printers, visit the HP website.
Using the file manager
You can now delete files that are responsible for entering the PIN using any decent file manager. Most experts recommend using AROMA Filemanager. In the same way, you need to transfer it to the gadget’s memory card and install it in Recovery mode. Then you need to enter the system partition and manually delete several files with the extension.key.
After a reboot, the problem in the form of a blockage will disappear.
Using the archive in Recovery
Now you need to enter Recovery mode as usual. using various keyboard shortcuts and buttons on the turned off gadget. Which and in what sequence to clamp, you can find out on the website or in the manufacturer’s instructions. In the mode menu it is necessary:
- Find the Zip installation point from the memory card.
- Specify archive.
- Reboot device.
After these manipulations, the PIN code will not be.
How the issue with the code is solved
The easiest way to find out the standard PIN code of a Samsung TV is to take out instructions from your model or find it on the Internet. It contains a special section dedicated to this issue. There you can also find out what to do if the password has been changed and then lost. Having neither instructions nor access to the network, you can only count on your memory, which, unfortunately, in such matters most often fails, and a locked device blocks access to Smart Hub.
Standard for Samsung Smart TVs, the manufacturer sets a simple pin. 0000 (less often 1111). If the owner did not change it or did not use it at all, there will be no problems. If there were changes, as an option, you can reset the settings to return the old password.
The PIN for Samsung TVs can be reset with the remote control in a simple way:
Then press the Mute button in a clear sequence Update button. Update button Update button.
To have the previous access to the hub and continue to use the TV, you can restore the factory code (for TVs assemblies before 2012, these are the same 0000 by default). You need to find the EXIT button on the remote control, hold it down and hold it for at least ten seconds.
For newer models, from 2012, the procedure for resetting the user password is carried out by pressing the buttons from the remote control in the sequence: Mute, 8, 2, 4, Power (power button). You need to press the buttons quickly.
It is easy to reset the PIN code on Android using the Recovery mode, the name in translation means “recovery”. In our case, the point is to restore the system before setting the PIN. The fact is that when the lock is turned on, system files appear in the OS, the deletion of which will unlock the gadget. This operation will require:
- Unlock Bootloader. By the way, some do it right away, without waiting until the question appears, how to remove the PIN code from an Android phone.
- Install custom Recovery.
- Download pin_face_unlock.zip file to a memory card.
- In the Recovery menu, install the archive-update pin_face_unlock.zip.
- Reboot device.
This, of course, is not a complete reset, but it allows you to solve the problem one hundred percent if USB debugging is pre-enabled on the device.
Mounting the pin_face_unlock.zip archive on the gadget’s memory card
The next step in this work is to install the pin_face_unlock.zip archive on the Android SD card. Everything is simple here: the card is removed from the device and inserted into the computer’s reader, after which the previously downloaded archive is copied onto it (available freely on the network). Then the card is inserted back into the gadget.