How to set interest on iPhone xp

How to check iPhone battery health

Despite the advancement, the iPhone does not boast impressive battery life, so the actual question is how to check the status of the iPhone battery. Over time, it loses its capacity and needs to be replaced. In this regard, many users of Apple products are interested in how to find out the status of the iPhone battery.

The iOS system allows you to track battery wear. After 500 full charge cycles, the iPhone battery loses a quarter of its capacity. Apps will help you find out the exact battery status. Battery Life allows the owner of the device to quickly assess the degree of wear. The application will give a rating of “excellent”, “good”, “bad”, “very bad”. In the Raw Data section, you can see how many charging cycles the device can withstand.

There is an alternative iBackupbot application. To install it, you need to connect your phone to your computer and open the gadget in the Devices window. Technical information will be displayed. By clicking on “Information”, you can find out the number of battery charging cycles CycleCount.

If the application showed a negative indicator, do not sound the alarm. It is better to double-check the state of the gadget in a service that uses special equipment.

Charge percentage on iPhone XR and other models

IPhone users cannot avoid questions about the nuances of the gadget. Having studied the terms of use, you can solve any problem related to the charging of the device.

How to Extend iPhone Battery Life

Under normal conditions, the gadget loses from 15 to 20 annually, with intensive use up to 50% of its capacity. Sometimes the iPhone battery will wear out earlier. The reason is not only the manufacturer’s oversight, but also in non-observance of the operating rules.

The first thing to do to improve battery performance is to check for a software update. The latest firmware includes energy-saving technologies to increase the lifespan.

To keep the battery healthy, you should:

  • Charge your iPhone less often in your car.
  • Do not use non-original accessories.
  • “Swing” the battery (discharge and charge up to the maximum value).
  • Protect the device from moisture, mechanical stress.
  • Charge iPhone without a case. Certain types of accessories can cause the device to overheat, resulting in decreased battery capacity.

The ideal temperature for using the iPhone is between 16 and 22 degrees. The most dangerous mode of operation is when the air temperature is above 35. In this case, the device will stop turning on.

interest, iphone

Note! Do not store your gadget in a hot room. If the temperature exceeds the recommended values, the maximum charge level will be reduced to 80%.

How to enable charge percentage on iPhone XR, X, XS

Many late iPhone owners do not know how to enable charging percentages on iPhone. For them, the procedure for turning on the charge is different. The XR model is a bezel-less device with a notch at the top, with no space on the screen to display charging. To make the necessary data visible, you should go to the “Control Center”. There you need to swipe down from the upper right corner of the screen and hold it down for a while. As a result, the indicator appears.

If you can’t find the feature, you can use Search to display the percentage of charge on iPhone XR. You need to enter a query with the word “battery” or “charge”, the iPhone will find the settings on its own.

Another easy way to check the charge on your iPhone X or XP is to ask Siri. It will answer the question about the state of the iPhone battery.

Important! When the power saving mode is on, the charging percentage will be displayed regardless of the settings.

What to do if battery status is not displayed on iPhone

Sometimes it is impossible to assess the state of the battery. no data is displayed on the screen. If there are dashes on the screen where the indicator is usually located, you need to restore statistics. An easy way to do this is to charge your device. If that doesn’t help, you should try:

  • Restore firmware. To do this, you need to put the device in the DFU state. You do not need to restore a backup, you need to see if the data is shown on a “clean” device.
  • Reset indicator helps reset settings and content.
  • Update iOS. New software versions take into account the errors of previous updates.
  • Download beta software. It is better than the one installed on the iPhone, it fixes the bugs of the previous versions.

A common reason for missing battery status information is battery replacement. If a non-original part was installed, the system may not accept it. In this case, restoring the firmware and updating iOS will help.

How to adjust your sleep schedule on iPhone, iPad, and iPod touch — Apple Support

If all else fails, it makes sense to replace the battery. But there is no guarantee that after that the charging status will be displayed.

In which iPhone models and iOS versions you can turn on the charge as a percentage

The battery level icon on the iPhone is not very informative. Looking at it, it is difficult to say how many percent are left on the battery. In order not to guess by the icon, you can display the amount of energy in the battery as a percentage. You can do this without installing applications.

For the first time, the function of displaying charging in numbers appeared in iPhone 3GS devices. Since iOS was updated to version 3.0.1, iPhones have been released with the function of displaying the charge in numbers. To display percentages on other models, you need to go to the gadget’s settings and open the “Battery”. It’s under the “Basic” section. In the window that opens, you need to find the line “Charge in percent” and turn the switch to the on state. Immediately after that, the battery charge in percentage will appear in the status bar next to the battery icon.

Important! If you know how to set charging percentages on an iPhone, you can always be aware of how long the device can work.

The method of including the charge in the iPhone as a percentage is suitable for use on any iPhone model with new versions of iOS pro, s, se If the version of the operating system is old, there will be no “Battery” section in the settings. Instead, you need to select the “General” box and click on “Statistics”. Here you should find the “Charge percentage” switch. If it is on, you can determine the remaining energy in numbers.

Yellow charging on iPhone, what does it mean

With the release of iOS 9, power saving mode became available to iPhone owners. When used, the battery reduces the amount of energy consumed. The device works a little slower and some functions are disabled.

A sign that the smartphone has switched to power saving is when the charge icon turns yellow. For the indicator to change color, you need:

  • Go to settings.
  • Select the section “Battery”.
  • Drag the toggle switch to the “On” position.

Although the performance of the smartphone will drop, it will be able to work without a charger for at least 3 hours. The function is convenient for users who want to extend the operating time of the gadget.

Important! An easy way to turn on power saving mode by asking Siri about it.

The device will automatically offer to start energy saving when the battery level drops to 20%. iPhone will exit mode when the charge reaches 80%. If you manually set the mode, it will remain on even when the battery is full.

To turn off energy saving yourself, you need to go to “Settings”, select “Battery” and switch Low Power Mode to inactive state. The charge indicator will turn off amber. On iOS 11 devices, you can add Power Saving Mode to Control Center.

How to increase the maximum battery capacity on iPhone

Owners of iPhones know that without recharging their device works for less than a day. Helps improve battery capacity:

  • Setting in iPhone charge percentage. This makes it easier to control the energy charge. Seeing that the battery is “low”, you need to stop using applications that consume energy.
  • Decrease the brightness of the screen. Optimal when the backlight is at 50%. This is the recommendation from Apple, claiming it’s an easy way to increase battery capacity. Adjust the indicator in “Settings”, “Screen and brightness”. There you need to turn off the “Auto brightness” mode (automatic brightness change in conditions of different lighting conditions).
  • Deactivation of services. You can save 30-40% battery if you remember to turn off wireless connections when you leave home. To do this, go to the quick access menu and turn off Bluetooth and Wi-Fi.
  • Disable content updates. If the permanent news that the system displays on the screen is not needed, you can deactivate them. You need to go to “Settings”, then to “Content Update”. For this purpose, you can also disable Push notifications that appear in the background. To do this, you need to select “Mail, address, calendars” in “Settings”. Opposite “Downloading data”, you need to put Push in an inactive state.
  • Disable service notifications. For maximum battery performance, it’s a good idea to go to Settings, select Notifications, and leave a few of the desired positions. The signal format can also be changed. It is enough to change the sound notification and icon demonstration to save battery power.

By listening to the advice, you can easily extend the battery life of your iPhone. This is facilitated by the display of the battery charge as a percentage on the device screen.

View Battery Percentage Using Control Center

Open Control Center by swiping down from the top right corner. You will see the hidden battery percentage along with other hidden icons in the status bar, such as WI-FI. You can close the control center by swiping up from the bottom.

READ  How to unlock iPhone 8 without fingerprint

Let’s summarize

Well, now you understand how you can set charging percentages on iPhone 4 and other i-smartphones, and you can decide which display, with or without numbers, is more convenient for you. By the way, when the power saving mode is activated (it turns on on the iPhone when the charge level reaches 20%), the charge level automatically starts to be displayed in numbers.

Battery charge percentage on iPhone 11 how to view or enable

You have the newest iPhone 11, looking for an answer to the question of how to turn on the battery percentage. Unfortunately, no way. iPhone 8 or earlier versions had the ability to add a percentage of battery to the status bar. But iPhone X, iPhone XR, iPhone XS, iPhone 11, iPhone 11 Pro and iPhone 11 Pro Max do not have this option for us.

In case you are looking for an option to add a battery percentage indicator to the status bar on the iPhone 11, much to your chagrin you cannot do this. Since there is a large cutout, which is why there is not enough space to add a battery charge indicator as a percentage. Nevertheless, Apple has added other methods to see the battery charge indicator as a percentage. In this post, let’s take a look at two different methods for displaying battery percentage on iPhone 11.

Two methods to see the battery percentage:

  • Using the control center
  • Using Siri

How to make battery percentage for other iPhones?

It is noteworthy that the method by which the digital display of the battery level as a percentage on the iPhone 4 is not completely suitable, for example, the iPhone 5.

The fact is that iOS, the operating system on which all i-gadgets work, changes and with each version it becomes clearer and more intuitive for users. Starting with iOS 8, to set the digital display of the charge level, you must follow the following instructions:

  • Open the “Settings” menu, tap on Fri “Use”.
  • In the new window, we find the line “Charge in percent” and move the slider opposite it to the active position.

Well, in iOS 9 and above, the answer to the question is how to turn on the charge in percentages has become even easier:

  • Open the “Settings” menu, tap on Fri “Battery”.
  • In the new window, we find the line “Charge in percent” and move the slider opposite it to the active position.

Agree, the extreme annotation is more intuitive, where it is more logical to find. how you can put the charging percentages on the iPhone in the “Battery” section, if in the “Statistics” or “Usage” menu.

However, since the 4th iPhone can be upgraded to a maximum of iOS 7.1.2, the user of these phones will have to manage the first annotation (the same annotation is relevant for the iPhone 3GS).

As for the iPhone 4S phones, all the “fives”, as well as the iPhone 6 and 6 Plus, they can be updated to iOS 8 and iOS 9. check which version of iOS you have (“Settings” / “General” / “About this device »») And use the appropriate guide.

Owners of the iPhone 6S, 6S Plus, SE, 7 and 7 Plus models need to use the extreme annotation, therefore, both the 6S and SE models are released with iOS 9 installed on board, and the “sevens” are generally with iOS 10.

Appls.Me

To find out that it is time to charge the device, the user of the i-smartphone should look at the special indicator in the upper right corner of the accessory monitor. At the same time, by default (apparently, Apple decided that it was so aesthetically prettier), there will be no digital display of the charge, and therefore it will only be possible to assess its level, which is called, “at a glance”. This is not comfortable for everyone.

However, the “apple” giant foresaw the user’s desire to “know for sure”, and therefore it is possible to install the digital battery index on the iPhone, while this will not require any special applications, everything is done in almost two movements through the “Settings” menu.

How to enable digital display of the battery level on the first i-smartphones?

You may be surprised, but on the first iPhones. iPhone 2G and 3G there was no “Charge percentage” function in the settings, and to make it enabled, you had to install a special application. SBSettings, and in it, in the “System Options” section, activate the slider opposite parameter “Numeric Battarey”. Such is the trick!

How to charge percentage on iPhone 4?

In order to charge as a percentage on the fourth iPhone, follow these usual instructions:

  • Open the “Settings” menu, tap on Fri “Basic”.
  • In the new window we find the line “Statistics”, press it.
  • In the “Battery usage” section of the “Statistics” menu, move the “Charge percentage” slider to the active position.

Charge Percentage Display on iPhone 11 / XS / XR / X. Mission Impossible?

Unfortunately yes. The bangs simply prevent devices from constantly displaying the charge as a percentage. But there are ways available to make up for the loss.

How to enable charge percentage on iPhone 11 / XS / XR / X

All iPhone 11 / XS / XR / X users experience discomfort when they need to look at the percentage of their device’s charge. How this can be fixed in 5 ways. read our instructions.

Because of the “bangs”, iPhone 11 / XS / XR / X users may suffer from the inconvenient need to constantly call up the control menu to see the battery percentage. Unfortunately, this issue appears on all iPhone 11 / XS / XR / X devices because the top menu bar is very small compared to later models.

How then to watch the charge on the iPhone 11 / XS / XR / X as a percentage

Let’s take a look at 5 ways to solve the problem with percentages on iPhone 11 / XS / XR / X.

view the charge as a percentage in the control center

  • To see the percentage of the iPhone’s charge, you just need to swipe down from the top of the screen of your device.
  • This will open the control center.
  • At the top right, you will see your iPhone‘s charge percentage.

watch the charge as a percentage on the widget

  • To do this, you just need to swipe the main screen from left to right and click the “Change” item at the bottom.
  • Then select from the large list of adding widgets “Controls”.
  • We save.
  • You can now view the desired charge information in the menu on the left.

widget for displaying the charge status of connected devices

IOS 14 introduces the ability to add widgets directly to the desktop. Of course, this is not a 100% output, but it is also convenient. If you have already upgraded to iOS 14, you can use this method.

  • We open the menu of the widgets (just with a long tap we make all the applications on the desktop “shake”).
  • Then click in the upper left corner “Add”.
  • Looking for a battery widget.
  • Choosing the appearance that we want to see on our home screen.
  • Add, save.
  • We use.

Just ask Siri how much battery power you have left. She will kindly tell you about the status of your battery in a dialog box.

Another universal way to see the percentage of iPhone charge is to simply put it on charge. Then on the lock screen you will be shown such a desired percentage. The main thing is not to get carried away with such a connection. Sometimes it’s easier to just swipe and open Control Center.

Yes, such a simple, but at the same time complex problem was thrown to us at Apple. It is not very convenient to constantly look at the percentages in the control center, however, this is at least some way out to keep abreast of the battery status.

Do not forget that you can always contact our specialized iLab service center if you have any problems with Apple technology.

How to turn on the charge percentage on 11 iPhones?

Battery charge level on iPhone 11, 11 Pro, XS, XR, X as a percentage: how to enable. 2 ways To find out the battery charge level on all iPhone models is very simple, just go to “Settings” → “Battery” and enable the “Charge in percent “.

Where to see battery status on iPad?

Open the “History” tab → select “Battery” on the left → you can read the data on the results page about how long and how your tablet lived during the test, but I suggest going to the “Battery” tab to compare it with other tablets and understand what is the condition of your battery.

How to set the percentage of charge?

Go to the “Settings” “Battery” menu and enable the “Charge percentage” option.

How to enable charge percentage on XR?

Iphone XR: how to charge percentage

  • Place your finger on the right ear (top corner of the smartphone). There is a drawn battery.
  • Open Control Center. To do this, swipe your finger from top to bottom.
  • In the upper corner, on the right ear, in addition to the battery miniature, you will see the battery charge as a percentage.

Where to see battery status on iPhone?

Battery Health On iPhone 6 and later, new features are available when you update to iOS 11.3 or later: View the battery status and notify you when you need to replace it. These functions are found in the menu “Settings” “Battery” “Battery status”.

How to set the charge percentage on the iPhone XP?

As we know, in the new Apple flagship, unfortunately, there is no way to see the battery charge as a percentage. This is due to the new design of the top of the iPhone X display, which simply has no room to display percentages. In order to find out the percentages, you just need to open the Control Panel.

Charge the iPhone X as a percentage

Many users of mobile gadgets are accustomed to assessing the current battery level using an indicator with percentages. This indicator should be located in the upper right corner of the screen. This feature was available in all iPhone models.

READ  How to customize the alarm sound on iPhone

In the settings, an option was used, after activating which, together with the battery icon (in the upper right corner of the screen), the charge indicator was displayed as a percentage, which reported how many percent the battery had left. With the release of the tenth iPhone, this option simply disappeared from the settings. Therefore, many users began to wonder how to make a percentage charge on the iPhone X.

It should be noted right away that this cannot be done. Apple has simply decided to abandon the option to monitor the battery charge as a percentage. This feature has been removed from the settings, and there are simply no tricks to enable it.

This decision by Apple may be due to the fact that on the new iPhone X there is simply no place for a demonstration in percentage of battery charge. At the top of the screen, the ledge eats up a large area of ​​the information panel.

If you are used to focusing only on the battery charge as a percentage, and not on the battery picture, then you can go to the “Control Center” menu and there you can see what percentage is left. While the “Control Center” is running on the screen, the battery charge will be displayed in percent.

How to remove an app from multitasking on iPhone X

iPhone shows battery charge incorrectly

We follow the instructions below to open the control center:

    Touching the upper right corner of the screen where the battery icon is.

Pull down without releasing your finger until the “Control Center” is displayed.

  • Now you should pay attention to the upper part of the display, an indicator should appear next to the image of the battery icon, which will demonstrate its charge in percent.
  • It turns out that to view the number of battery percentages, these steps will need to be performed each time. The inability to view the charge as a percentage on the main page of the system causes discomfort for many iPhone owners.

    View Battery Percentage on Other New iPhones

    On new iPhones, you can set the charging percentages as follows: go to settings and select the “Battery” tab. This section should be located slightly below the “Basic”.

    Then in the “Battery” section we find the “Charge in percent” switch. It is necessary to move this switch to the “On” position, and the charge value in percentage will be shown in the status bar, along with the battery icon.

    How to charge percentage on iPhone X

    Let’s look at the settings that will tell you how to charge the iPhone X as a percentage using the standard iOS functionality.

    Checking the battery percentage on old iPhones

    In older versions of iOS, the Battery tab may not be present in the settings. In this situation, you must select the item “Basic”.

    In this menu there is a switch “Charge in percent”. If you put it in the “On” position, then next to the battery icon, the percentage of charge will be displayed.

    If you cannot find the “Charge in percent” option, then you need to use the search in the settings. We enter the search query “Charge in percent” or “Battery”, after which you can find a function that allows you to put charge percentages on the iPhone.

    The first option to set a percentage indicator next to the battery icon became available in the iPhone 3GS. In older versions of the gadget, this option worked only after updating iOS to the system version 3.0.1. All new models of devices, except for the tenth version, after the iPhone 3GS were equipped with this function out of the box.

    How to charge an iPhone X as a percentage of 4.7 (93.33%) 3 people.

    How to set charge percentage on iPhone XR?

    Iphone XR: how to charge percentage

    • Place your finger on the right ear (top corner of the smartphone). There is a drawn battery.
    • Open Control Center. To do this, swipe your finger from top to bottom.
    • In the upper corner, on the right ear, in addition to the battery miniature, you will see the battery charge as a percentage.

    Where to see battery status on iPhone?

    Battery Health On iPhone 6 and later, new features are available when you update to iOS 11.3 or later: View the battery status and notify you when you need to replace it. These functions are found in the menu “Settings” “Battery” “Battery status”.

    How to make the charge show as a percentage?

    Enabling battery percentage display on pure Android 9

    • Go to Settings and click on the item “Battery”.
    • Turn on the item “Battery level”.

    How to take a screenshot on XR?

    How to take a screenshot on iPhone X, XR, XS and XS Max

    • Press and hold the side button on the right edge of the iPhone.
    • Press the “Volume Up” button.
    • Release both buttons.

    How to make iPhone 11 charge percentage?

    Battery charge level on iPhone 11, 11 Pro, XS, XR, X as a percentage: how to enable. 2 ways To find out the battery charge level on all iPhone models is very simple, just go to “Settings” → “Battery” and enable the “Charge in percent “.

    How to set the charge percentage on the iPhone XP?

    As we know, in the new Apple flagship, unfortunately, there is no way to see the battery charge as a percentage. This is due to the new design of the top of the iPhone X display, which simply has no room to display percentages. In order to find out the percentages, you just need to open the Control Panel.

    How to make a screen on 11 iPhone?

    • Press the side button and the volume up button at the same time.
    • Release both buttons quickly.
    • After taking a snapshot, a thumbnail will temporarily appear in the lower left corner of the screen. To view the photo, tap on a thumbnail, and swipe left to remove the thumbnail from the screen.

    How to show charge percentage on iPhone with Home button

    Go to “Settings”, click on “Battery” and activate “Charge in percent”. Also there you can turn on the “power saving mode”.

    How to bet interest on iPhone X, XR, XS and XS Max?

    Apple has decided to detail the technical information so that it is not constantly imposed unnecessarily. It was decided to hide the indicator in the control center shutter. You just need to make one movement to access it.

    How to show charge percentage on iPhone X and newer

    If you recently bought yourself an iPhone X or newer, you clearly noticed that the old method does not work and the charge is not displayed as a percentage.

    Since the new iPhones have less space for displaying information about the device due to the “bangs”, the percentage charge does not fit.

    To date, nothing can be done so that the percentage of charge is always displayed on the home screen and lock screen. But there are 3 ways to see the charge as a percentage.

    • Go to the Control Center. To do this, in the upper right corner, tap the phone charge and swipe down, the top will display the charge of your device as a percentage. To close Control Center, swipe up from bottom to top.
    • You can ask Siri to show the percentage of charge.
    • Put iPhone on charge and you will see the charge percentage on the screen.

    Is it possible to enable battery percentage on iPhone X, iPhone XS, and iPhone XR across all screens?

    Unfortunately, no. the “ears” in the iPhone X, iPhone XS and iPhone XR do not leave room for displaying percentages. Many other arguments can be given, but this will not change the fact that people are used to always seeing the battery level as a percentage on their screen, at least optionally. The lack of such an opportunity causes discomfort for many iPhone owners.

    Battery charge percentage on new iPhones

    So, in order to put the charging percentages on the iPhone, you need to open the iPhone settings and go to the “Battery” section. This section should be located just below the “Basic” section.

    And then everything is very simple. In the “Battery” section, there is a “Charge percentage” switch. Move this switch to the “On” position and the charge percentage will appear in the status bar, next to the battery icon.

    This method works equally well on all iPhone models with newer iOS versions, including iPhoneX.

    When your iPhone starts to run out of power quickly, use this guide to install a new 12-month battery.

    With the advent of new edge-to-edge device designs and iOS improvements, the company’s engineers have decided to minimize the content of the status bar. Do not set the “Active percentage” option in the settings. However, do not rush to despair.

    How to make a forwarding using the “Continuity” function?

    The “Continuity” feature (translated from English. “continuity”) first appeared on iOS 8. Apple software developers claim that this feature was able to “make friends” between iOS and OS X. Thanks to “Continuity”, a user can combine multiple Apple devices to work together.

    The main feature of “Continuity” is as follows: an incoming call is displayed on the screens of all gadgets authorized under one Apple ID. on the iPhone, iPad, iPod Touch and even on the Mac. Therefore, the user can pick up the phone on the device that is closest to him.

    Owners of gadgets with iOS 8 will face a serious limitation: for Continuity redirection to work, all devices must be connected to the same Wi-Fi signal source. This limitation binds the user hand and foot, and here’s why:

      Calls are not diverted from the switched off phone. Call forwarding can be configured only within a limited area. the one that is under Wi-Fi coverage.

    IOS 9 extends Continuity functionality so you don’t need to connect to the same Wi-Fi network to forward calls. If you forget your iPhone at home, you can easily pick up an incoming call on your work Mac. In this case, it is not at all necessary that the smartphone be turned on.

    You need to set up Continuity forwarding like this:

    READ  How to install ios app on iPhone

    Find the “Phone” section in the “Settings” iPhone and go to it.

    Go to the subsection “Calls on Other Devices”.

    Move the “Allow Calls on Other Devices” slider to the active position. If you stop at this stage, the iPhone will forward calls to all other Apple ID-authorized Apple devices within the coverage area of ​​one Wi-Fi source.

    How To Run Your Windows 10 PC On iPhone, iPad & iPod Touch FREE iOS 14 / 13 / 12 NO Jailbreak

    In the “Allow Calls On” section, switch the sliders in front of those gadgets to which, in your opinion, calls from the smartphone should be redirected.

    Continuity forwarding is free, but this method has a significant drawback. calls are redirected only within the Apple ecosystem. If you need to set up call forwarding from iPhone to Android device, “Continuity” is useless. the user will have to resort to the traditional method.

    How to make call forwarding on iPhone: the usual way

    You can enable call forwarding even on the most “ancient” iPhones with initial versions of iOS. Here’s how to do it:

    In the “Settings” find the “Phone” section and go to it.

    In the “Phone” section you will need to find the “Call forwarding” subsection (the “Calls” block).

    Toggle the toggle switch “Forwarding” in the subsection of the same name.

    On the next screen, enter the number you want to forward calls to. It is permissible to use not only mobile numbers, but also Skype, Google Voice numbers.

    Go back. You will see that the “Forwarding” slider remained in the activated state, and a little below the “Forwarding” field appeared, in which the number you specified was entered. In this case, the following icon will be displayed in the status bar:

    You can turn off call forwarding from iPhone by simply moving the Forwarding slider to an inactive position.

    Call forwarding will work even if the Apple device is disabled. because the call forwarding function is implemented at the level of telecom operators. This is also a disadvantage: mobile providers may charge additional fees for forwarding to be possible. You can clarify the cost of call forwarding by the operator and connect the corresponding option to the number by calling the contact center of the organization. the service provider.

    If your iPhone has one of the latest operating systems installed, you can organize call forwarding in an alternative way. 100% free!

    How to make call forwarding on iPhone?

    Call forwarding was available even on the first iPhones. Users of gadgets with the latest versions of iOS have a choice of how to set up call forwarding. thanks to the innovative “Continuity” function.

    There are many situations in which call forwarding may be necessary. A typical example: a subscriber went on a trip and upon arrival bought a local SIM card so as not to overpay for roaming. By setting up forwarding from the old number to the new one, he will avoid the risk of missing an important call. Call forwarding is popular among people who are accustomed to clearly distinguishing between work and personal time. Leaving the workplace, a person can activate call forwarding to the number of a colleague who has not yet left, and spend time calmly with his family.

    The owner of an iPhone with a modern iOS version is able to set up call forwarding in two ways at once. We’ll take a closer look at both. traditional and more non-trivial.

    Before setting up call forwarding on the iPhone in the usual way, the user needs to ask the operator if it is possible to add this service to a cell number and what is its cost. It may come as an unpleasant surprise for the subscriber that he will be charged a daily fee for forwarding calls.

    If you need to set up forwarding from one “apple” device to another, it is wiser to turn to the “Continuity” function, which will redirect calls within the Apple ecosystem without requiring money. However, the “Continuity” function is quite convenient only on iOS version higher than 9.0.

    What Percentages Mean in iPhone Battery Status Menu

    Apple admitted two years ago that it deliberately slowed down older iPhones like the iPhone 6, iPhone 6s, iPhone 7, and iPhone SE. In this regard, back in iOS 11.3, a menu appeared in which you can see the status of the iPhone battery and find out if it needs to be changed. After that, they began to ask us in the Telegram chat several times a day whether it is worth changing the battery if its residual capacity is 80%, 70% or even 50%. Therefore, we decided to finally put an end to this issue.

    Many people get scared when battery capacity begins to dwindle

    What affects iPhone battery health

    Some people may notice that the iPhone is rapidly decreasing its remaining battery capacity. What does it depend on? There may be several reasons:

    • Charging with non-original adapter, resulting in more wear.
    • Using iPhone at peak power (if you play it all the time and never let go of it). Games, editing and watching videos over LTE are quite resource-intensive processes that can provoke increased energy consumption.
    • Charge your phone in your car or wirelessly without Apple certification.

    Using a Smart Battery Case also affects iPhone battery capacity

    How to turn off iPhone battery performance management

    When the battery reaches 80% and below, performance problems may begin due to the fact that the smartphone will forcibly cut down on the processor’s power in order to minimize voltage surges and not provoke spontaneous reboots. You will also see another message at the bottom of the screen that warns that your iPhone’s battery is “significantly low”. There will be another link that will point you to a page on how to service your phone.

    If your device shuts down due to low battery, the same screen will indicate that “performance management has been applied”. It will also be possible to disable this feature. Please note that you cannot turn performance management back on until the next time you turn off your smartphone. Your iPhone will automatically turn it on if it ever does. The performance management function is only available on iPhones starting from the 6s model, and therefore it is useless to search for it on earlier devices.

    What will happen to the iPhone 7 battery in 4 months

    And here is the percentage of capacity left on the iPhone 7, which was purchased in November 2019. It is slightly smaller, but the smartphone is still capable of working without any restrictions.

    What will happen to the iPhone 11 Pro Max battery in 5 months

    My 2019 iPhone 11 Pro Max shows 99 percent battery capacity almost 5 months after purchase. Apple is not yet limiting phone power: “Your battery is currently maintaining normal peak performance.”.

    What Percentages Mean in iPhone Battery Status Menu?

    In the Battery Status menu, you will see a percentage indicating the maximum battery capacity of your iPhone, followed by a message explaining the performance status of your phone. The message you see depends on the percentage of the capacity. For instance:

    • one hundred%. Your battery is currently maintaining normal peak performance.
    • 95%. This iPhone shut down unexpectedly as the battery was unable to provide the required peak power. Performance management has been included to help prevent this from happening again.
    • 79% or less. Your battery is significantly degraded.
    • Unknown. This iPhone cannot detect battery status. Usually this message appears when installing a poor quality battery in questionable service centers.

    iPhone with less than 80% capacity. The battery has already swelled

    What is iPhone battery health

    iOS 11.3 and later have a Battery Status menu. Just go to Settings Battery Battery Status. Here you will see information about your iPhone’s maximum capacity as a percentage and peak performance. You can also see if your iPhone is slowing down due to Apple’s performance management feature.

    Loss of battery capacity even a week after purchase. this is normal. The main thing is that it does not reach 80%.

    Table of Contents

    | Contacts | Content | RSS