How to swap monitors in windows 10

Editing the registry

Advanced users can turn to the “Registry Editor” built into Windows to achieve the result obtained in the previous method. With its help, you can make it so that the color change is applied only to the taskbar, but not to the Start menu and Notification Center, which is the most accurate solution to our today’s problem. Consider both options.

Change the color of the taskbar, Start menu, and Action Center

    In any convenient way, start the “Registry Editor”, for example, using the search built into the operating system.

Using the analogue of “Explorer” located on the left or the address bar at the top, go to the following path:

Find the AccentColor parameter in the folder and open it by double-clicking the left mouse button (LMB).

In the “Value” field, enter the code of the desired color in hexadecimal notation. It is important to take into account that in the Windows 10 environment, the BGR color scheme is used, and not RGB, and therefore the first and last “pair” of values ​​from the combination must be swapped.

Log out of the system (keys “CTRLALTDEL”. “Log out”) and re-enter it or restart the computer.

Change the color of the taskbar only

    Follow the steps from Method 2 of this article or the instructions above, then start the “Registry Editor” and go to the following path in it:

Double-click the LMB to start the ColorPrevalence parameter. Change the default value (usually 0 or 1 is indicated there) to 2, then click “OK” for the changes to take effect.

Log out and log back in, or SIMply restart your PC. The color you choose will only be applied to the taskbar, and Start and Action Center will return to their previous appearance.

If you need to roll back the changes made in the second step, just change the value of the ColorPrevalence parameter to the one that was originally set for it. 0 or 1.

How to make the taskbar transparent

In addition to the direct “repainting” of the taskbar in any of the colors supported by the system, it can also be made transparent, partially or completely. it depends on the means used. This is not directly related to the task at hand, but in this way the panel can be given the color of the wallpaper on the desktop, since they will be located behind it. To learn more about what and how you need to do this, the instructions presented at the link below will help. In addition, one of the methods discussed in it allows you to do the same thing that we examined in the second part of the previous one. do not “paint” the start menu and the “Notification Center”.

Change the color of the taskbar in Windows 10

There are several ways to solve the problem voiced in the title of the article. by using the standard tools of the operating system (there are several options) or third-party applications. All of them are as SIMple as possible in their implementation and allow you to achieve the desired result in just a few clicks.

Installing the theme

Often, users are not satisfied with the color not only of the taskbar, but also of other design elements of the “dozens” (for example, the “Start” menu, the top “Explorer” bar, pre-installed and third-party applications, icons). All this can be changed and / or customized to fit your needs by installing the theme. The latter usually contain not only color schemes, but also alternative sound libraries, wallpapers, as well as various mouse pointers and loading animations.

Windows 10 comes with several preinstalled themes, and you can access the full range in the Microsoft Store. In addition, there is an option for those who are accustomed to acting the old fashioned way. to install software from third-party developers, which gives access to the possibility of a finer configuration of the OS appearance. To learn how to change the color of the taskbar by setting the theme (s) of the design, the article presented at the link below will help. Additionally, we suggest that you read the instructions for changing the icons used in the operating system.

Change taskbar color in Windows 10

The taskbar is an important design element of Windows 10, which contains shortcuts to running and pinned applications and folders. Its standard appearance and color may not suit all users, and therefore today we will tell you how to change it.

Color selection

If you do not have a desire to install standard or third-party skins, you can go the more obvious way. refer to the “Personalization” settings of Windows 10.

    Open “Settings” (keys “WINI” or shortcut on the sidebar of the Start menu) and go to the section “Personalization”.
READ  Connecting a monitor via USB Type C

In the panel on the left, open the “Colors” tab and select the appropriate one from the palette. Also available are Recent Colors and Automatic Main Background Color. The latter, as you might guess, leaves the decision at the mercy of the system.

In the “Display the color of elements on the following surfaces” block, check the box next to “In the Start menu, on the taskbar and in the notification center” if it was not there before.

If you have not found a suitable color among the colors presented on the palette, click on the “Additional color” button. Select it by moving the circle-shaped element along the gradient scale. A little lower you can determine the value of brightness. from dark to light.

It’s so easy to change the color of the taskbar using standard Windows 10 tools. However, this solution has two drawbacks. some colors are not supported, plus they are applied not only to the panel, but also to the Start menu and to the Notification Center.

We considered all the possible ways to change the color of the taskbar in Windows 10, as well as a couple of life hacks, through which you can make sure that other elements of the operating system are not “repainted”.

How to set up two monitors on Windows 10?

Today, PC users have two or more monitors in their arsenal. The smaller display is used for office applications, while the larger display is preferred by gamers for running colorful games. However, having only one system unit, users often wonder how to connect and configure a second monitor in Windows 10.

Before connecting the second screen to a PC with Windows 10, you need to make sure that the selected monitor contains VGA, HDMI, DVI standards, which are also available on the rear interface panel of the system unit itself (the video card must support the ability to connect two displays). Thus, by connecting 2 monitors, the user can use different plug connectors. It is recommended to install the main screen with the one with the best characteristics.

First of all, you need to connect both monitors to your Windows 10 PC using the appropriate cables.

After connecting 2 displays, you can adjust the clarity (and other parameters) and the position of the desktops on the monitor.

Setting up a second monitor on Windows 10 is as follows:

  • Press “Win P” to bring up the “Projection” menu and choose how to use the second monitor. A small window will appear.
  • Next, we select the option of using an additional display. In most cases, the options are “Extend” (create a second blank Windows 10 desktop) or “Duplicate” (completely duplicate the screen content on the second monitor).

A new window will open. Under the image of a small monitor, click on the “Detect” button.

Or, you can open “Settings”, “System”, “Screen” and perform all the same actions.

If after this manipulation the image on the monitor does not appear, you should change the screen resolution and make sure that the cable is connected correctly.

In the case when the cable is connected correctly, but there is no image, we recommend installing or updating the video card driver. After updating the software, the following settings must be made in the additional screen parameters:

  • Selecting “Properties of the graphics adapter”.
  • A new window will open. The adapter type should contain the name of the video card, not the base adapter from Microsoft.
  • If the video card is not set as the main device, you should click on the “Properties” button and change the settings.

It is important to note that installing a second monitor is a straightforward process. However, you need to be careful when connecting monitors and adjusting picture display parameters.

Reverting the keyboard layout to its original state

After replacing or repairing the keyboard, the reassigned key layout can be returned to its original state. This is also done in the MapKeyboard program. On the virtual keyboard of the program, click “Reset keyboard layout”. Then, in the dialog box that appears, we confirm the return of the keyboard layout to its original state. click “Yes”.

This will be followed by another dialog box, which says you need to log out to apply the changes. Click “Yes”.

But there will be no exit from Windows, but a restart of the computer. After reboot, the keyboard layout will be returned to its original state.

Key remapping

MapKeyboard is downloaded from the official website in the archive. After unpacking the archive, run the program as administrator.

We will see the MapKeyboard interface as a virtual keyboard.

How do I reassign missing or broken keys? First you need to decide which keys will be reassigned to those that have dropped out or do not work. Since the reassigned keys will act as keys that are missing or not working, it is naturally necessary that the former are unused or rarely used. These keys are typically Scroll Lock, Pause (Break), Insert, Home, End, Page Up, and Page Down. Also, for reassignment, you can sacrifice the keys of the digital block along with its activation key Num Lock.

READ  How dead pixels look on the monitor

Having found the best options for replacing the keys, we can proceed directly to the process itself. First, on the keyboard of the MapKeyboard program, press the replacement key. the one that will act as a key that is missing or not working. In our case, one of the rarely used keys, Scroll Lock, has been selected for reassignment. This key can now be pressed instead of the missing letter W, and with it the letter C in the Russian keyboard layout. Further, in the field with a drop-down list at the bottom of the MapKeyboard window, you must select, in fact, the missing or non-working key itself. the letter W in our case. After this selection, the reassigned key will turn green.

Further, according to the same principle, you can do the following key remapping. The last stage of work is saving the changes made. To do this, click at the bottom of the program window on the right “Save Layout”.

Then we will see a window where it is notified that when the changes are confirmed, the system will be logged out. Click “Yes”.

After logging out, you need to log in again. And you can already test the work of the remapped keys.

How to remap keys on the keyboard: step by step instructions. Keyboard shortcut

As you know, most computers or laptops PCs and Macs use standard keyboards with predefined key layouts and language layouts. Many users, for example, when changing the operating system or the equipment itself, find it difficult to get used to the new position of the buttons. In this case, you can reassign the keys on the keyboard so that they correspond to the layout to which the user is accustomed. But more often than not, this applies only to those situations when, when entering text, the user does not look at the characters, but uses the so-called blind typing.

For which it is necessary to reassign the keys on the keyboard?

But the case is not limited to the above-mentioned situations. Quite often, you can also come across cases when on a computer or laptop some key is out of order.

In the case of standard equipment in the form of PS / 2 keyboards, the question is solved quite SIMply by buying a new one. But what to do if a breakdown occurs on a laptop? Replacing the keyboard on laptops is not a cheap pleasure. Here, as an alternative, you can SIMply reassign the keys on the keyboard, abandoning the rarely used buttons. However, you can meet even more primitive situations when it is necessary to mark the combinations corresponding to the switching of languages ​​and layouts.

MapKeyboard

The utility is free, but support has ended. Now it is a part of the HotKeyControl project, which allows free use of the program for 15 days. However, MapKeyboard itself can still be downloaded from the Internet.

    Run the utility as Administrator, this is important. To do this, right-click on the icon and select “Run as administrator”

The keyboard layout appears in the window. Left-click on the key you wish to reassign. At the bottom of the drop-down list, select the new key function. To disable the button, select the “Disable” function.

The reassigned key turns green. Make all the changes you need and click “Save layout”.

A warning will appear asking you to end your session to make changes. Click “Yes”.

Changes will take effect only after you log in again.

How to change the keyboard shortcuts: Windows tools

First, let’s consider the SIMplest option associated with language layouts. By default, all recent Windows systems use a switch based on the left Alt key combined with Shift to change the language. But many users prefer to change the language and layout using the Ctrl / Shift combination, considering it more convenient.

To change the switch, you need to use the standard “Control Panel”, in which you select the language section (Windows 10) or languages ​​and regional standards (Windows 7, for example). Further, the transition to additional parameters is carried out and the change of the key combination of the language panel is selected by pressing the corresponding button in the new window, after which the Ctrl / Shift combination is SIMply indicated from the list.

Basically, you can assign keys in the sense of changing a character or action using a small program for controlling the keyboard and mouse MS Keyboard Layout Creator, which can be downloaded directly from the Microsoft website. After starting the application, it is enough to select a list of all actions, and, if necessary, for each separately taken button, change them until the keys are completely disabled. Here you can also change the assignment of operational keys like Shift, Alt, etc.

SharpKeys

Before us is another SIMple program. The procedure is almost the same as in the previous case. First, the (Add) key is added, then a new letter or action is selected from the list (Turn Key Off), after which changes are saved by pressing the Write To Registry button, and then, again, a complete system restart is performed.

READ  How to make two windows on the screen

The only and most important problem of this utility is that it does not work with the Fn key, and the assignment of Cyrillic characters must be done using their counterparts in the English layout.

Finally, another small application (this time in Russian), which allows you to assign any button and even change the standard combinations or set your own combinations.

As usual, the original key is added first, then the keystroke emulation line is used, the letter or action of another key is selected from the list, and the changes are saved by pressing the button with the diskette. By the way, this program compares favorably with the two previous themes, which allows you to perform not only the assignment of keys, but can also be used when setting up various kinds of manipulators, gamepads or actions with software players.

Displaying the language bar

You can also customize the appearance of the language bar for ease of use. This is done from the section that was described for changing keyboard shortcuts, but only on the “Language bar” tab.

swap, monitors, windows

Most users prefer to use the pinning option in the Taskbar (as such, the language icon appears in the system tray next to the clock). However, you can place the language bar anywhere on the Desktop, or even hide it completely. It is better to leave the display of language labels, but to show additional icons or use transparency when the panel is inactive, you can leave it off.

MapKeyboard

This program allows you to assign keys on the keyboard as quickly and easily as possible. After starting the utility, the on-screen keyboard will appear.

Let’s say you want to reassign the Caps Lock or Shift button. On the (virtual) keyboard, press the required button, through the Remap selected key line, select a new character or operation of another key, and then save the settings by pressing the Save Layout button. Upon completion of all actions, a reboot of the system will be required.

How to program keyboard shortcuts

The official Windows utility. “Mouse and Keyboard Control Center” will help program key combinations. You can download it from the Microsoft website. It is easy to use and has an intuitive interface.

After downloading and installing the program, find your keyboard in it, select “Shortcut keys” in the list and, by entering a combination in the field, assign it functionality.

Sticky keys

If the keyboard malfunctions appeared after a child sat at the computer or a pet ran over it, most likely a key sticking was turned on. For example, holding down the Windows key in combination with the upper row of letters controls the windows of the system, and with SIMple typing, you can get completely unwanted results. To fix this:

    Press the Shift key 5 times in a row to bring up the Sticking settings.

MapKeyboard

The program does not need installation.

  • Download the archive and unpack it.
  • Run the MapKeyboard.exe file as administrator.

What to do if keys are randomly reassigned

Keys cannot be reassigned on their own because the computer itself cannot do anything. There are several reasons for the keyboard malfunction. First of all, check your computer for viruses and only then try the methods described below.

Assigning a combination to launch an application

You can create a keyboard shortcut for quickly launching the application as follows:

  • Bring the program shortcut to the desktop.
  • Right-click on it and select “Properties”. Go to the “Shortcut” tab.

Outdated keyboard drivers

A situation may arise where the system on the computer is updated, but the keyboard drivers are not. In this case, we expect a conflict between the system and the equipment.

  • Open Windows Device Manager via the search bar in the Start menu.
  • In the list of devices, find the “Keyboards” item and expand it.

Remap keys on the keyboard in Windows 7, 8, 10

The organization of a comfortable workspace is an important task for those who spend a lot of time at the computer. And what is the convenience without a keyboard carefully tuned to your own needs? You do not want to make a lot of unnecessary manipulations in the system, while the application can be launched into operation with one press of the desired key? Then you should take some time to customize the keyboard.

  • Customizing the keyboard on Windows
  • Remap keys using standard tools
  • Change keyboard layout
  • how to change keyboard shortcut for language layout on Windows 10
  • Assigning a combination to launch an application
  • how to assign a keyboard shortcut to launch an application on Windows 7
  • Remapping keys using third-party utilities
  • MapKeyboard
  • how to disable and remap keys in MapKeyboard
  • SharpKeys
  • how to disable and remap keys in SharpKeys
  • How to program keyboard shortcuts
  • What to do if keys are randomly reassigned
  • Outdated keyboard drivers
  • Sticky keys
  • How to disable Sticky Keys in Windows 7
  • Language layout failure

Change keyboard layout

To set up a keyboard shortcut for changing the language, follow these steps:

    In the search box “Start” enter “language”. Open the first search result.

Customize the combinations you want

  • Choose the combination that suits you and click “OK”.
  • | Contacts | Content | RSS