How to Transfer Data to Samsung Memory Card

Link2SD

The program is rightfully considered by experienced users as “heavy artillery”. It is important that Link2SD is absolutely free, but. again. requires root users and granted superuser rights.

Before using Link2SD, you need to properly prepare the card: you need to create a hidden partition on it using Recovery, which will later serve as a memory storage for portable applications:

  • Turn off the phone, and then start the system by holding down the volume buttons (this combination to go to Recovery is relevant for most models of Android smartphones, for details on starting the mode on your device, check the instructions for the device).
  • We tap on the line “Partition SD Card”, select the type of file system (experienced users use EXT3), determine the required volume of the hidden folder and the swap partition (usually called Swap). After selecting the parameters, it remains to move the slider, thereby creating separate folders on the SD.
  • We are waiting for the end of the process of formatting the memory card and reboot the smartphone.
  • We proceed to the direct transfer of data to the drive. We launch the Link2SD downloaded from the playmarket. In the displayed list of applications, select the desired program and tap “Send” in the menu. The program will prompt you to decide on the list of files, it is better to select all.

We press “Ok” and wait for the end of the application transfer process with the concomitant release of the internal memory of the smartphone.

Move to SDCard

Another useful utility that will come in handy for transferring programs to SD is called “Move to SDCard”. It does not require superuser rights and weighs very little, which makes it extremely popular with Android smartphone owners.

  • After installing the program, launch it and open the menu with a swipe to the right.
  • Tap on the item “Move to memory card”.
  • Select the desired program from the list, click “Move”.
  • We are waiting for the completion of the transfer process.

The utility does not work in system programs, and users note that the program does not always cope with the declared functionality and often does not transfer applications completely. But for novice users, it is this software that becomes the starting point in working with the memory of smartphones. \

transfer, data, samsung, memory

AppMgr III

There are a lot of programs for transferring programs on Google Play, but this software is especially popular among Android users.

After downloading “AppMgr III” you can proceed to the direct transfer of programs. The application has a fairly simple interface, and there is also support for the Russian language, which makes its use convenient and understandable.

  • We launch the program. In the menu that opens, all downloads available on the phone will be immediately displayed.
  • We are looking for an application that needs to be transferred to SD, put our finger on the icon and hold it until the context menu appears on the screen.
  • In the menu, select “Move application”.

That’s it, the program will automatically move to SD and thereby free up space in the internal memory. For the changes to take effect completely, you will need to restart your smartphone.

How to transfer apps to a memory card on Samsung

How to transfer applications to a memory card on Samsung is a question of interest to all owners of popular smartphones who want to save space on their phone. Now we use so many applications that there is objectively not enough space for them. Some of them, with little damage to the performance of the program, can be transferred to SD with a speed of at least 10 Mb / s.

There are risks. if you subsequently remove the card, for example, to “transfer” photos and media files to a personal computer, applications stored on the SD will start to glitch after it is returned to its place. Provided that important programs are regularly backed up, you can easily reinstall them without losing data.

Special programs

If you don’t feel like digging into your phone manually, and you are looking for a simple method on how to transfer data to external storage on a Samsung phone, you can turn to special programs. They are suitable for those owners of phones whose OS does not support the above methods. For the utilities to work, you must first unlock root-rights.

Standard way to transfer apps

On different firmwares, the algorithm for transferring applications to SD may differ slightly, but in general it follows the standard scenario for all Android devices. This can be done manually or using an automatic service built into new smartphones.

  • We go to “Settings”, select the item “Applications”.
  • Choose from the proposed list the program that you plan to transfer to SD.
  • A menu will open in which you need to find the button responsible for the transfer.

Not all applications support movement, so if the specified button is not in the menu, accept and choose another one to move in order to free up space.

On the new flagships on Android, the function of automatic transfer to SD inserted into the smartphone is available. To do this, you need to dig deeper into the settings so that the OS starts to consider the external drive as internal storage:

  • Go to “Settings”.
  • Open the menu item responsible for memory management.
  • We are looking for a section about SD in the menu.
  • We press “Format”, select the item “As internal storage” and continue to follow the commands of the system.

Keep in mind that formatting will erase the data clean, so take care of transferring important files to a PC or cloud storage before starting the described manipulations.

Next, you only need to confirm the system’s proposal to transfer the selected programs to the vacated space. Your smartphone will now perceive SD as its own internal storage, and the programs that you transferred there will accordingly work without the slightest logistical disruptions.

If necessary, everything can be returned back: for this, go to the “Format” section and select the “As portable storage” item. Applications will return to the internal memory of the smartphone, and SD will again be used as a portable storage object.

It is quite easy to transfer applications to a memory card, freeing up the smartphone’s memory by this action. To do this, you can use both the built-in capabilities of your Android phone and external software. The main thing is to have a spacious flash drive and properly prepare. save important files to a PC or cloud storage, and format the drive if necessary.

Automatically

Some devices running Android 6 or later allow the card to be used as part of the internal memory. This option makes it possible to transfer all applications at once.

To make the card work as part of the internal storage, go to the settings and open the section dedicated to memory management. Find the SD card menu in it. Use the “Format” command, select the “As internal storage” option and follow the system prompts. If this option is not available, this option is not available on your device.

Formatting will erase all data from the card. After that, it cannot be used on other devices until you format it again.

Then confirm the transfer of applications to the card. From this moment, the device will begin to perceive it as part of the internal storage, transfer old applications and install new ones on the card.

How to copy/move Files from Internal Storage to SD Card -Samsung Galaxy phones

To return the program back to the device memory, you need to use the “Format” command again by selecting the “As portable storage” option. Before formatting, the system will offer to transfer applications to internal memory.

READ  How to format a USB flash drive on a Samsung phone

How to Transfer Android Apps to SD Card

This will free up space for new games and programs.

How to move apps to SD card

Although the process of moving games and programs on different firmwares is slightly different, the procedure is similar everywhere. This generalized instruction should be suitable for everyone.

Manually

First, make sure the memory card is inserted into the machine. Then open Android settings and select the “Applications” section. In the list of games and programs, click on the one that you want to transfer to the map.

When the menu of the selected application appears on the screen, find the navigation button and use it. After transferring in the same menu, it will be possible to return the application back to the internal memory.

If the button is missing or not pressed, the program may not support navigation. Repeat these steps for other games and applications. If you fail to transfer, it is likely that this feature is not available on your device.

Can you transfer applications to a memory card

It is important to understand that not all devices provide this opportunity. There is no list of models that support the transfer. To find out if your device belongs to them, you just need to try moving applications to the map. This process is reversible and uncomplicated.

Also, even if your gadget allows you to transfer, you won’t be able to do it with all applications. Some games and programs allow only part of their data to be moved to the map, and many do not support transfer at all.

Is it worth storing apps on an SD card at all?

The internal storage on your device may not be enough for all the applications you need. Modern programs and especially games can be very voluminous. This problem can be solved by moving them to an SD card.

But there are also pitfalls. Cards are slower than internal memory. Therefore, games and other resource-intensive applications may slow down after the transfer. To reduce the loss of performance, it is advisable to choose a card with a minimum speed of 10 MB / s. The higher the better.

In addition, the moved applications will stop working as soon as you remove the memory card. And when you insert it back, it is possible that some of them will start to glitch and give errors.

So apps are worth moving around if you’re willing to sacrifice speed and stability for free space.

Using third-party programs

If your device does not support any of the listed methods, but root rights are unlocked on it, you can try to transfer applications using third-party programs. For these purposes, there are, for example, the Link2SD and App2SD utilities. But even their creators do not guarantee the performance and stability of this method. So be careful.

AppMgr III

There are a lot of programs for transferring programs on Google Play, but this software is especially popular among Android users.

After downloading “AppMgr III” you can proceed to the direct transfer of programs. The application has a fairly simple interface, and there is also support for the Russian language, which makes its use convenient and understandable.

  • We launch the program. In the menu that opens, all downloads available on the phone will be immediately displayed.
  • We are looking for an application that needs to be transferred to SD, put our finger on the icon and hold it until the context menu appears on the screen.
  • In the menu, select “Move application”.

That’s it, the program will automatically move to SD and thereby free up space in the internal memory. For the changes to take effect completely, you will need to restart your smartphone.

Standard way to transfer apps

On different firmwares, the algorithm for transferring applications to SD may differ slightly, but in general it follows the standard scenario for all Android devices. This can be done manually or using an automatic service built into new smartphones.

  • We go to “Settings”, select the item “Applications”.
  • Choose from the proposed list the program that you plan to transfer to SD.
  • A menu will open in which you need to find the button responsible for the transfer.

Not all applications support movement, so if the specified button is not in the menu, accept and choose another one to move in order to free up space.

On the new flagships on Android, the function of automatic transfer to SD inserted into the smartphone is available. To do this, you need to dig deeper into the settings so that the OS starts to consider the external drive as internal storage:

  • Go to “Settings”.
  • Open the menu item responsible for memory management.
  • We are looking for a section about SD in the menu.
  • We press “Format”, select the item “As internal storage” and continue to follow the commands of the system.

Keep in mind that formatting will erase the data clean, so take care of transferring important files to a PC or cloud storage before starting the described manipulations.

Next, you only need to confirm the system’s proposal to transfer the selected programs to the vacated space. Your smartphone will now perceive SD as its own internal storage, and the programs that you transferred there will accordingly work without the slightest logistical disruptions.

If necessary, everything can be returned back: for this, go to the “Format” section and select the “As portable storage” item. Applications will return to the internal memory of the smartphone, and SD will again be used as a portable storage object.

Move to SDCard

Another useful utility that will come in handy for transferring programs to SD is called “Move to SDCard”. It does not require superuser rights and weighs very little, which makes it extremely popular with Android smartphone owners.

  • After installing the program, launch it and open the menu with a swipe to the right.
  • Tap on the item “Move to memory card”.
  • Select the desired program from the list, click “Move”.
  • We are waiting for the completion of the transfer process.

The utility does not work in system programs, and users note that the program does not always cope with the declared functionality and often does not transfer applications completely. But for novice users, it is this software that becomes the starting point in working with the memory of smartphones. \

Key Features of Samsung Data Transfer:

Android to Android File Transfer: Supports Contacts, Call Logs, Text Messages, Photos, Videos, Music, Documents and Apps.

Moving from Android to iOS: support for contacts and documents.

IOS to Android Data Transfer: Supports Contacts, Text Messages, Photos, Videos and Music.

IOS to iOS File Transfer: Supports contacts, calendars, notes, and more.

Strong Compatibility: Support Samsung Galaxy S10 / S9 / S8 / S7 / S6 / S5, Samsung Galaxy Note 9 / Note 8 / Note 7 / Note 6, Samsung Galaxy J8 / J7 / J6 / J5 / J4, Samsung Galaxy A9 / A8 / A7 / A5 etc.

It also works on LG, Huawei, HTC, Sony, Motorola, OPPO, Xiaomi, OnePlus and other brands of Android phones and tablets.

For iOS, supports iPhone, iPad and iPod.

How to Transfer Data between Samsung Phones?

To transfer everything from your old Galaxy phone to your new Samsung phone effectively, you need to:

  • Install software and connect Samsung devices to computer.
  • Enable USB debugging on both Galaxy phones.
  • Select files such as contacts, SMS, media files, applications, etc.
  • Click “Start Copy” to transfer data from Samsung to Samsung.

Connect Samsung devices to computer via USB cable.

Install and run Samsung Data Transfer on Windows / Mac computer. Then, connect your Samsung phones to the computer with USB cables at the same time. Please enable USB debugging on your Samsung devices.

Follow the steps to make your Galaxy phones detectable.

READ  How to change fingerprint on Samsung

You need to follow the instructions on the screen for the program to recognize your Galaxy phones. After that, you can enter the main interface as shown below.

Note: Correct the sides of the phones. Make sure the old Samsung phone (sending) is on the left and the new Samsung Galaxy (receiving). on the right, otherwise you can click Flip to swap them.

If necessary, you can check the “Clear data before copying” checkbox on the receiving phone.

Select Data and Transfer Files from Samsung to Samsung.

Just mark the files you want to transfer to your new Samsung phone in the middle bar. After that, click “Start Copy” to transfer data from old Samsung phone to new.

Hot articles that also read:

How to Transfer Photos from Samsung to Samsung Galaxy S9 / S9 Plus

[Updated in 2019] How to Transfer Contacts from Samsung to Samsung?

Link2SD

The program is rightfully considered by experienced users as “heavy artillery”. It is important that Link2SD is absolutely free, but. again. requires root users and granted superuser rights.

Before using Link2SD, you need to properly prepare the card: you need to create a hidden partition on it using Recovery, which will later serve as a memory storage for portable applications:

  • Turn off the phone, and then start the system by holding down the volume buttons (this combination to go to Recovery is relevant for most models of Android smartphones, for details on starting the mode on your device, check the instructions for the device).
  • We tap on the line “Partition SD Card”, select the type of file system (experienced users use EXT3), determine the required volume of the hidden folder and the swap partition (usually called Swap). After selecting the parameters, it remains to move the slider, thereby creating separate folders on the SD.
  • We are waiting for the end of the process of formatting the memory card and reboot the smartphone.
  • We proceed to the direct transfer of data to the drive. We launch the Link2SD downloaded from the playmarket. In the displayed list of applications, select the desired program and tap “Send” in the menu. The program will prompt you to decide on the list of files, it is better to select all.

We press “Ok” and wait for the end of the application transfer process with the concomitant release of the internal memory of the smartphone.

Transfer via “Settings”

On some Samsung models, you can transfer applications to the memory card in the smartphone settings. Let’s see how this is done:

  • Go to settings and select the “Applications” section.
  • Select the software that you want to save on the SD card through the dispatcher.
  • Check the box next to “Memory card”.
  • Complete the transfer via “Export Classic” to Samsung.

How to Copy Data from Samsung to Samsung via USB Cable?

It might be the easiest way to transfer specific files from Samsung to Samsung using a USB cable. and you don’t need to pay for it. With it, you can move photos / videos / VCF (contacts) to your new Samsung Galaxy by copy and paste. However, you are not advised to use this method if you have tons of photos and videos to transfer. Moving files in large batches will take a long time.

  • Connect your old Samsung Galaxy to PC with a USB cable.
  • Go to “My Computer” and click on the name of your device.
  • Open SD card / internal storage that stores the photos, videos or VCF you want.
  • You can find photos and videos in the “DCIM” folder or view VCFs directly in the storage folder.
  • Copy and paste data from your Samsung device to PC.
  • Disconnect old phone and connect new Galaxy to PC.
  • Drag files from PC to Samsung SD card or internal storage.

How to Transfer SMS from Samsung Galaxy to Computer Efficiently?

AppMgr III

The utility differs from its counterparts in the function of mass transfer of installed software. In addition to the transfer of “AppMgr III” can massively for selected applications:

  • Clear cached data.
  • Stop and hide unused software.
  • Inform immediately whether it is possible to transfer software from the list or not.
  • Sort installed software by main criteria.

You can transfer data using the buttons in the utility header. Works with Android 4 and higher, but may not be compatible with some OS skins (e.g. Xiaomi).

Transfer Data from Samsung SD Card to Computer

When a user decides to transfer their data from a Samsung SD card to their computer, there are a number of different factors to consider beforehand. One of the most important. it is an anticipation of problems or problems that may arise during transmission. For example, the user often encounters various problems during data transfer, such as data loss, data corruption, transfer failure, etc.

Then how to solve the above problems to ensure smooth data transfer from Samsung to computer? You can rely on Coolmuster Android Assistant, a professional yet easy-to-use Android data manager to help you transfer apps, photos, videos, music, contacts, text messages, books and more from Android to your computer and vice versa. transfer data from SD card to Samsung Galaxy S9, S9 Plus, S8, S8 Plus, S7, Edge, S6, S5, S4, Note 8, Note 7, Note 4, Note 3, etc. to PC or Mac computer.

The following guide will walk you through the process of transferring files from Samsung SD card to computer in 1-2-3 easy steps using Android Assistant. First of all, you have to click on the download buttons as shown below:

MobileTrans vs Smart Switch vs Google Sync

Now that you know about three different methods of transferring all kinds of data from Huawei to Samsung, you may be wondering about the best method. For your convenience, I quickly compared these options here.

MobileTrans Google Sync Smart Switch
TimeVery fastmiddleSlow
Transfer methodWired connectionWirelessWireless
Data supportExtensiveExtensiveLimited
Supported DevicesExtensive (6000 devices supported)Target phone must be SamsungExtensive
Compatibility issuesNo oneSometimesNo one
Ease of useVery easyA little difficultA little difficult
LimitationsRequires desktop app installationLimited to Samsung phones, data compatibility issuesGoogle Drive storage consumption, network data consumption, slow
Other propertiesDevice Backup & Restore and WhatsApp Transfer SolutionNo oneNo one

Like this! By following this guide, you can surely be able to transfer data from Huawei to Samsung without any problem, if you don’t want to face compatibility issues, just choose MobileTrans. Phone Transfer as a solution to transfer data from Huawei to Samsung. It supports all kinds of data, all masters, and also offers a ton of additional functions. Download it once and use it as many times as you want, switching from one phone to another, regardless of any restrictions.

Files To SD Card

Lightweight and easy to understand utility allows you to transfer: folders, files and utilities. between the SD card and the internal memory of the phone. Optional program:

  • Works with Android 5 and up.
  • The device does not need root.
  • Allows you to select the memory card as the location for saving new files (default).
  • Moves data using the “Move to” function.

How to transfer the necessary data from the phone memory to the memory card

Hello everyone! How can I transfer apps and other data from phone memory to memory card if my device is running out of space? For smartphones with the Android operating system, there are several solutions to this problem. And we will consider them in detail in the article.

How to transfer a photo to a memory card on an Android device?

In modern phones and tablets, excellent camera modules are used, which sometimes allow you to get professional images. However, along with the increase in the quality of the images themselves, the size of the photographs also grows, which take up a lot of space. If the device runs out of free space, it should be freed up. This can be done, including with the help of a memory card, to which we will transfer photos and, accordingly, free up space on the device.

READ  Samsung phone how to open the back cover

Moving photos from main memory to memory card

In order to transfer images to a memory card, you will need the memory card itself installed in your smartphone or tablet, and a file manager.

After you insert the memory card into your smartphone, you can make sure that the device “sees” it. To do this, go to “Settings” and select the subsection “Memory” (or “Device maintenance”, as is the case with Samsung and One UI firmware).

Here find the item “SD memory card”. As you can see, our device recognized the card.

Now you need a file manager. You can use any application of your choice as a file manager, since the transfer process itself will be the same. If FM is already installed in your firmware, you can use it. If not, download using Google Play Store. We will use Samsung‘s built-in file manager. “My Files”.

Select the files you want to move (press and hold the file, then select others, if there are several). At the bottom of the screen, click “Copy” or “Move”. ​​depending on what you need to do.

We go back one step and select the “USB flash drive” we added.

You can create a folder by clicking on the three dots and choosing “New Folder” from the menu.

Open it and transfer files in the same way.

As you can see, nothing complicated. In this way, you can transfer other files to the memory card with the exception of applications, or you can transfer from the memory card to the main memory.

Friends! If our site helped you or you just liked it, you can help us develop and move on. To do this, you can:

  • Subscribe to our YouTube channel.
  • Subscribe to our group.

How to enable SD card on Android

Despite the obviousness, not all users are able to connect a memory card to the phone. Let’s see how to do it.

  • If the flash card is not already installed in the slot of the phone, do so.
  • After that, the message “SD card is ready.” Will appear on the screen of the device. Change the default write memory? “.
  • Click “Yes”, the changes will take effect.
  • If there is no message, make changes in the “Memory” section
  • Alternatively, swipe down the curtain at the top of the screen and tap on the message that appears.

After following this instruction, you can download any files to the memory card.

Save files instead of internal memory to SD card

The operating system takes up a significant portion of the internal memory of the smartphone. Not much time has passed since the purchase of the phone, the memory fills up, and the issue of deleting extraneous files begins to bother. Even after installing an SD card in the phone, the problem is not always solved. users do not know how to change the location of saving files. We will fix this problem now.

If you have a Samsung phone (Android 9 or higher)

For Samsung smartphone owners, changing the location of saving files is as easy as shelling pears. The settings are changed through the standard browser installed on the phone by default (usually Chrome). Actions:

  • Go to the phone menu and find the classic browser (the name is “Internet”);
  • Click on the 3 vertical buttons in the upper right corner and go to the menu;
  • Click “Settings” Websites & Downloads;
  • Select “Where to save files”;
  • Select “Memory Card”.
  • From now on, all downloads will be automatically placed on the SD card.

If you have a Samsung Galaxy, but the method did not work, it may be due to the fact that:

  • you are using a non-standard browser,
  • there is no SD card in the phone,
  • you do not have an original Samsung phone, but a fake.

Method 1

  • Go to “Settings” and select the “Memory” section;
  • In the “Memory Settings” section, check the box next to “SD card”.
  • A message will appear with the following content: “The phone is encrypted. Before changing the save location, make sure the new location is safe.”.
  • Check the card for viruses, if not sure, then click “OK”.
  • If the card is not very spacious, an additional message will appear: “The installed card has a small amount of memory. Switching is not recommended. Switch? ” Do this or replace the card with a larger one.
  • After that, another message will appear ” When switching, data loss may occur, the phone will reboot, for the changes to take effect”. Click “Continue”
  • Wait for the phone to restart.

After turning on the smartphone, the amount of internal memory will be increased by the “size” of the SD-card, and files will begin to be saved to it. In a similar way. with the phone reboot, everything comes back.

Combining the memory card from the internal

There is a great way to expand the local storage of your Android phone with a memory card. In other words, it will be merged, and the need to constantly change the save location will disappear.

Change the save folder in the browser

A browser is used to access the Internet, and most of the files are downloaded to the phone through it. In order for the data to be downloaded to a memory card, you can configure it so that before downloading it asks for a save location. Let’s consider changing the save path using Google Chrome as an example.

  • Launch Chrome browser;
  • In the menu (3 vertical dots) go to “Settings”;
  • Scroll down the page, select “Downloaded Files”.
  • Opposite the line “Ask where to save files” move the slider to the right.
  • You can get to this section in another way. select the “Downloaded files” item in the menu, and from there go to “Settings” and move the slider.

Transferring files to SD card

To free up space, transfer data from the internal memory to a USB flash drive. For this

  • go to the “Files” folder
  • select the subfolder of interest (photos, videos, documents, etc.).
  • Press on the file and hold your finger for a second until it is highlighted.
  • Mark one by one all the photos / videos / audio that you want to move to another location or click “Select all”, if there is such an item.
  • Click the Move button.
  • In the new window, select “Memory card”, and then. a specific folder.
  • Wait for the data transfer to finish.
  • Repeat the procedure with the rest of the information in the same way.
| Contacts | Content | RSS