How to turn off screen rotation on iPhone

Table of Contents

Automatic screen rotation (orientation) on iPhone and iPad: how to turn it off

All iPhone and iPad users are aware of the ability of their devices to automatically switch orientation from portrait to landscape when rotating their device. But sometimes this may turn out to be inappropriate, since the screen changes orientation even with a slight deviation.

turn, screen, rotation, iphone

Since we do not always use our gadgets in a strictly upright position, even while lying on the bed while working with the Internet or reading emails, the screen can be rotated without our desire. This is exactly the case when you want to lock the screen orientation in a certain mode. The user does not have to worry about holding their iPhone or iPad at a certain angle.

How to turn off screen rotation on iPhone and iPad

Screen orientation lock has been available to iOS users for years as an option in Control Center. However, depending on your device model, access to Control Center may differ slightly. Follow the instructions below for your specific device to avoid confusion.

If you are using an iPad or a relatively new iPhone with a missing Home button, such as an iPhone X or later, you can go to Control Center by swiping down from the right edge of the screen.

If you’re using an iPhone or a supported iPod Touch that has a Home button, such as an iPhone 8 or older, simply swipe up from the bottom of the screen to open Control Center.

Click on the “Block” icon located right below the network settings group as shown in the screenshot below.

You will now notice that the icon has turned red. This will ensure that Portrait Orientation Lock is enabled on your iPhone or iPad.

If you want to deactivate the lock at the moment you want, just press the orientation lock switch again in the “Control Center”.

That’s all there is to it. From now on, you do not need to directly hold your iPhone or iPad so that it does not switch orientation by itself.

With Portrait Lock turned on, you can even lie on your side and browse Safari or YouTube without switching your device to landscape mode.

Regardless of which app you’re using, you can quickly turn Orientation Lock on or off in Control Center.

Note that you cannot turn on landscape lock on iPhone, while iPad screen orientation can be locked in both portrait and landscape mode. However, this may change at some point after the next software update for iOS and iPadOS. Yet the features of Apple devices often change and evolve over time.

What do you think about screen orientation lock on iPhone or iPad? Do you often use this option to prevent accidental screen rotation or to switch to portrait mode while lying on your bed. Share your thoughts and experiences with us in the Комментарии и мнения владельцев.

How to turn auto-rotate screen on and off on iPhone?

iPhone, like any other modern smartphone, allows you to use vertical or horizontal screen orientation. Why is this needed? For example, to watch a movie it is definitely worth using the horizontal orientation. For reading a book, as a rule, a vertical orientation is used. In general, in life we ​​usually use vertical screen orientation.

By default, any smartphone, including the iPhone, automatically flips the screen when the body is tilted. This can be said to be such a feature. If you want to lock the screen on your iPhone, it’s as easy as shelling pears.

Swipe up on your device to bring up the Control Center. In it you will see a lock icon with an arrow. Click on it.

After that, an arrow icon will appear in the status bar at the top of the screen. It means that screen rotation is currently locked. No matter how you turn your iPhone in your hands, the screen will not flip.

You can do it differently, however, it will take a little more time. Find the Settings app on your desktop and open it.

In the “General” section, check the “Lock orientation”.

In this case, the auto-rotate screen is turned off, that is, the lock is turned on.

As you understand, in order to disable the screen orientation change lock, you must do the indicated in the reverse order. Nothing complicated.

Friends! If our site helped you or you just liked it, you can help us develop and move on. To do this, you can:

  • Subscribe to our YouTube channel.
  • Subscribe to our group.

Setting screen orientation on iPhone

Screen rotation on iPhone needs to be adjusted to suit your personal preference. Not everyone likes the automatic mode, since at the slightest turn of the smartphone, the orientation of the screen changes. For example, reading a book lying on the bed, turning on its side, the smartphone screen will also unfold. It is convenient to use auto-rotate when a person often watches a video. In this case, the orientation quickly changes to horizontal and there is no need to do a series of adjustments every time. If screen rotation is off, the phone will work in one screen mode until the user turns off the function.

Note! Some apps have a separate layout for landscape orientation (mail, calendar, messages, photos).

On iPad devices, the option may work differently depending on the model. For owners of the iPad version lower than the iPad Air, you need to know that the regulation of the function is carried out through the basic settings. There is the item “Use side switch”. This section is responsible for controlling the rotation through the volume buttons. On newer models (iPad Air 2, iPad mini 4), auto-rotate can be configured through the Control Center.

Owners of smartphones version iOS from 4.0-6.0, in order to change the settings, you need to double-click on the “Home” button. As a result, the multitasking panel will appear at the bottom of the screen. Here you need to scroll the menu to the right to the button with the image of a lock and an arrow. With its help, the work of the auto-rotate is regulated.

What is screen rotation on iPhone

IPhone Auto-Rotate is an option that allows you to use vertical or horizontal screen orientation. For example, when watching movies, it is much more convenient to use the horizontal mode. Reading books and browsing social networks is carried out through vertical orientation. By default, the screen will always flip when the smartphone is tilted. This feature is not only for Apple products, but also for other devices.

What the auto-rotate icon looks like on iPhones

The action is based on a device. a gyroscope. With the help of special elements, information about a change in position is transmitted to the working area of ​​the phone. Then a pulse is read and the screen is rotated. If necessary, you can lock the automatic flip and then the screen will be in one position.

The option allows you to rotate the screen 90 and 180 degrees

How to turn screen rotation on or off on iPhone

Screen rotation is a standard feature that works on all smartphones by default. The option is aimed at making the use of technology more convenient, especially when watching movies or working with documents. However, screen rotation on the iPhone is often turned on at the wrong moment, you have to rotate the smartphone several times to return the orientation to portrait mode. To eliminate problems while using the gadget, you need to explore options for enabling and disabling screen rotation.

How to turn off screen rotation on iPhone and iPad

You can make orientation lock in a few seconds through the main control center. The actions will differ slightly depending on the gadget model used.

For new iPads and iPhones, starting with Model 10 and XR, where there is no Home button, shutdown through the Control Center is suitable. You can call it by swiping down on the right side of the screen.

On iPhones S, SE, 7 and 8, you need to swipe up from the bottom to open the control menu

In the menu that opens, find the “Lock” section and click on it. It is located under the group of main settings. After the icon turns red, you can be sure that screen rotation is turned off. To disable the lock, you must repeat these steps again through the control point.

The above steps will help you always use your iPad or iPhone without accidentally rotating in one orientation. The lock allows you to enjoy portrait orientation even while lying on your side, watching YouTube or using a browser.

Note! If necessary, the user can always enable or disable automatic rotation through the standard settings.

Please be aware that the iPhone display cannot be locked in landscape mode. The iPad, on the other hand, can be locked in both landscape and portrait mode.

READ  Ntoskrnl exe blue screen how to fix

How to disable auto-rotate on iPhone in the form of detailed instructions:

  • First, you need to unlock your iPhone to open the main menu.
  • Moving from bottom to top brings up a panel with quick access to settings.
  • By clicking on the lock icon, you can enable or disable the rotation, depending on the desired action.

After pressing the lock, the control center will display the message “Vertical orientation off”. Depending on the position of the button, the red background may light up or go out. To check the function, go to any application and turn the smartphone.

Note! If you activate the auto-rotate lock in landscape mode, the background of the display will return to vertical mode.

You can remove the screen rotation through the AssistiveTouch item. This is a common feature that users use to customize buttons for specific actions. AssistiveTouch allows you to flip the orientation in different directions in apps that support this feature.

Note! Turn off the screen rotation lock before using AssistiveTouch.

Go to the settings and open the “Basic” item. All major smartphone options are contained here. Under the Accessibility section, there is an AssistiveTouch that needs to be activated. There is a section “Physiology and motor skills” here. Next to the “AssistiveTouch” label, activate the switch. A green slider indicates that the feature is enabled. In addition to the icon, a small gray square will appear on the smartphone screen. Next, you should exit the main settings and open any application. By clicking on the square, a menu with options will open: notifications, device and control point. Here you can activate the action of the mechanical Home button by transferring it to the smartphone screen via the “Home” option.

To open an additional menu with parameters, you must click the “Device” item. Then “Screen Rotation” is selected. As long as the lock is off, you can rotate the phone in any direction. You can click on “Right”. “Left” to switch between orientations. To close the AssistiveTouch menu, tap anywhere on the screen.

How to enable auto-rotate on iPhone and iPad

Initially, the screen will rotate automatically from the very first turn on, since the settings are by default. In some programs or games, orientation rotation is not provided, so the picture will always be shown in the same position, regardless of the device settings. This is due to the application code that has been programmed to lock the turn.

Note! In normal cases, turn inhibit must be manually activated. The action of this mode will be indicated by a special icon in the menu bar of the iPhone or iPad.

  • Open the main menu of the device.
  • Raise the curtain with notifications with a swipe up.
  • In the window that opens, find the lock icon and click on it.

As a result, auto-rotate will work again and the screen can be rotated in the required direction.

Modern iPhones have a function in the “General” section that can change the operation of the switch on the side of the gadget. By default, this button is responsible for activating and deactivating the sound. However, it can be set to “Orientation Lock”.

If the switch is in the “Orientation Lock” mode, then you cannot work with auto-rotate through the “Control Center”. In this case, all actions are carried out using the switch.

Why iPhone auto-rotate screen doesn’t work and how to fix it

Auto rotate will only work when the switch is inactive. If the screen does not rebuild to landscape orientation, then the main reason should be looked for in the settings. Experts recommend to immediately check the “Control Center”, which contains the section “Blocking”.

If the rotation stopped turning on on iPhones of the Plus version, then the possible reason lies in the mode of displaying icons on the home screen. It is necessary to open the item “Settings”. “Brightness and screen”. “View”. There are two main display modes for items: standard and enlarged. The second option displays the icons in an enlarged view, and the rotation function will be disabled. Despite this, the screen will be flipped in all applications. To activate desktop rotation, open the “Standard” tab and click “Install”. The whole process will take a few seconds.

For mechanical reasons, auto-flip may not work due to damage to the gyro. This happens as a result of sharp blows, falls or shaking. The operation of the mechanism gets confused, which leads to partial or complete inoperability.

Note! Damage to the gyroscope must be eliminated by the master, since it is impossible to do this on your own.

Often the reason for the incorrect operation of the iPhone is a failure in the operating system. You can try to save the situation by rebooting your smartphone or doing a full reset. To restart, you must use the shutdown button of the device. After the screen turns off, the gadget should be launched after a few minutes and check if auto-rotate works or not.

Factory reset menu on Apple smartphones

Factory reset on iPhone means deleting all personal data on your smartphone, so before starting the process, you should back up your files, save contacts and other important information.

At the time of reset, you need to fully charge your iPhone or connect to power. Next, the settings open, the reset section is at the very bottom here. The device offers several cleaning options: delete settings, content and settings, network data, dictionary and keyboard, get rid of the data of the Home button, and also throw off location warnings.

The most common and effective method is to reset all settings. In this case, the information from the smartphone is not lost. In the section, you must confirm pressing the “Reset all settings” button with a positive answer. The whole procedure will take about 1-2 minutes. After execution, the iPhone will revert to its original settings, but the files and browser bookmarks will remain in place.

Note! Hard reset iPhone is a more radical method that allows you to completely clean your phone.

It is recommended to do a full reset not only to improve the phone’s functions, but also to clear unnecessary information. This is especially important for devices that have been in operation for a long time. After several “Erase iPhone” confirmations, data deletion begins. The smartphone will automatically shut down and restart again. After turning on, you will need activation, during which you must definitely connect to Wi-Fi and iTunes. Next, a message will appear on the screen where you need to select one item. set up a new one or restore from a copy. When restoring, all previous files will be returned, but only if a backup was created earlier. If all else fails, a flashing is done.

IPad Air, iPad 2, iPad (3rd generation), or iPad (4th generation) have a dedicated switch on the right side panel. Depending on the configured settings, this button is responsible for either locking the screen or mute the sound. You can test the rotation of the page orientation using this switch. If you fail to turn the page, then you need to change the basic settings.

Auto-rotate the screen is an indispensable feature that every user has used at least once on smartphones or tablets. Manufacturers equip this option with a technique to facilitate the use of gadgets. At any time, using the settings, you can turn orientation flip on or off, thereby adjusting the device to your actions.

Restart iPhone

No matter how ridiculous it may sound, a simple restart of the smartphone helps fix most of the problems on your device (including: screen rotation on the iPhone does not work). As you might have guessed, this case is no exception. In order to restart your iPhone, you need to:

For most iPhones and iPads, hold the Power button and Home button at the same time until the Apple logo appears on the screen. On iPhone 7, hold down the Volume Down and Power button at the same time until the Apple logo appears on the screen.

On iPhone 8, X, press the volume up then volume down and then hold the power button.

How to disable / enable screen rotation on iPhone and iPad?

If you don’t want the screen to rotate when you change the device’s location, you just need to use the screen rotation lock built into iOS.

Make sure Control Center is turned on.

Swipe down from the bottom of the screen to open Control Center.

The location of the screen rotation lock depends on which version of iOS you are using. In iOS 11 and up, it’s on the left, just below the first group of buttons. In iOS 7-10, the location is different, namely the upper right corner. Regardless of the iOS version, notice the icon that should show a lock with a curved arrow around it.

Click on the rotation lock icon to lock the screen in the current position. You will know the rotation lock screen turns on when the icon is highlighted in white (iOS 7-9) or red (iOS 10-11).

Turn screen rotation on or off on iPhone

Screen rotation not working: gyroscope calibration

Calibrating the gyroscope will also be helpful in solving the display orientation problem. To calibrate the gyroscope, you need:

  • Restart iPhone.
  • Open the compass app. After, you will see a pop-up message that asks for permission to calibrate the gyroscope.
  • Use the red ball to roll it in a circle on the calibration screen. Continue until calibration is complete.

Settings

Unlike other iPhone models, which rotate the image only in supported applications, the Plus series is capable of completely changing the orientation from portrait to landscape (including the desktop).

  • Open the settings and go to the “Display and brightness” section.

If you do not want the icons on the desktop to change orientation, but at the same time auto-rotate works in applications, set the value to “Increased”, and then save the changes by clicking the “Set” button.

Accordingly, in order for the icons on the desktop to be automatically transferred to portrait orientation again, set the value to “Standard” and then tap on the “Install” button.

Thus, you can easily configure auto-rotate and independently decide when this function works and when not.

Thank the author, share the article on social networks.

Our experienced team of editors and researchers contributed to this article and reviewed it for accuracy and completeness.

The wikiHow content management team closely monitors the work of the editors to ensure that each article meets our high quality standards.

If you want to view photos or notes on iPhone in landscape orientation. switch your phone from the standard “Portrait” mode to “Landscape” orientation (which presents the image horizontally) by disabling the screen rotation lock! Landscape orientation is ideal for watching widescreen video in full screen mode, typing long messages, and more. But keep in mind that some apps and places, such as the Clock app and the desktop, do not support screen rotation.

READ  How to put music on iPhone 7

Let’s say you are reading a book on an iPhone or iPad, the pages of the book cannot be rotated horizontally or vertically with respect to the screen. Is it convenient for you? Or, say, you are watching YouTube videos on the big iPad screen and even after rotating the screen, the videos just don’t turn on full screen? Or you cannot view your gallery of photos by turning your iPhone or iPad to the side.

Seriously, this is very depressing, because it’s a shame to have a large screen and not use it to the maximum. And yet, we love Apple devices for many reasons. In this article, we will tell you everything you need to know about the screen rotation feature, how to set up, disable and enable screen rotation on iPhone (5, 6, 7, 8, X), and all the errors that may be associated with it.

How to Disable / Enable Landscape Mode on iPhone

What is terrain mode? Landscape mode is a horizontal smartphone display mode, in which watching videos, films, using applications or games becomes many times more convenient than in portrait (vertical) mode. In order to disable / enable this mode, you need the following steps:

Click on Application Settings. 2. Tap Display Brightness. 3. In the list of options, note the “Zoom Display”. Under this heading, you should see “View”. Click on it.

You will see two tabs: When you select the Standard tab, you can switch between landscape and porter modes. When you select “Zoomed”, the entire interface will slightly increase.

Click “Install” in the upper right corner. Your iPhone will reboot to implement the changes.

Display scaling factor check

You can check if the zoom feature is enabled or disabled on the device. If this function is enabled, it will interfere with the free rotation of the screen. In order to disable it, you need to:

Go to Settings and select Display & Brightness. 2. Then, press “Display enlargement” and select the view option to check whether the display enlargement is enabled or disabled. 3. If the option is in the zoom state, just select the standard mode and then click on the “Apply” button to save the changes. 4. In the next window, click the “Use standard” button. to continue working with standard mode. 5. When finished, the phone will restart in standard mode.

Control point

The iPhone has a special quick access panel to the main functions and settings of the smartphone, which is called the Control Center. Through this, you can instantly enable and disable automatic screen orientation change.

    Swipe up from the bottom of the iPhone screen to display the Control Panel (it doesn’t matter if the smartphone is locked or not).

The active blocking will be indicated by an icon that has changed its color to red, as well as a small icon located to the left of the battery charge indicator. If later you need to return auto-rotate, just tap on the icon on the Control Panel again.

How auto-rotate blocking works

The ability to turn off automatic screen rotation has appeared in Apple products since iOS 4.0.

Users appreciated this innovation, as it made it possible to use the smartphone without any problems, without fear that the image on the monitor would turn over again.

To disable automatic rotation:

  • Press the Home button 2 times, then lower the page to the very end, where you can see the lock key. The image of a lock means that auto-rotation is locked.
  • In older firmware versions, it was required to jailbreak and use a third-party program so that the screen does not rotate in different directions.

How to turn off auto-rotate on iPhone

If you are used to lying on the couch with your phone, then the auto-rotate function can prevent you from enjoying the process of surfing the Internet or viewing photos.

Therefore, it is important to know how to turn off auto-rotate on iPhone in order to be able to see what you need on the mobile screen from a convenient viewing angle.

IOS 7 manual

Users of new models may face difficulties when working with the operating system iOS 7. To do this you will need:

  • Turn on the cell phone.
  • Open Control Center.
  • Perform screen rotation lock.

After that, check if the images and pages on the Internet have stopped rotating, then all your actions have been performed correctly. Please note that the image of a lock in a circle will appear in the status bar.

If at some point you want to reactivate auto-rotate, then pull the control center widget down, deactivate the lock using the same sign with the image of a lock in a circle.

You should see the inscription “Portrait orientation lock off”.

You can now rotate images and browser pages horizontally or vertically. Screen rotation will also apply to many applications and contacts.

The only drawback is that in most cases, locking is made only for portrait orientation.

How to set up screen rotation on iPhone?

Does the iPhone screen rotate at the wrong moment, or does not rotate at all when you need it? This article will show you how to control screen rotation on iPhone.

Set up auto-rotate iPhone screen

In some versions of the system, the auto-rotate screen will not be displayed in the notification item, but you can add it:

  • Go to “Settings” → “Control Center”.
  • Click on “Customize Controls” and click next to the desired function to add it to the menu. On a smartphone with iOS 13 and higher, this function is on by default, so you will not see it in the list, it will be immediately displayed in the control point.

To understand if the auto-rotate function is disabled, look in the control center to see if the icon is pressed. You can also see this in the menu itself, an auto-lock icon will appear next to the battery icon. Smartphone screen will not rotate when auto-lock is enabled.

Please note that the iPhone menu itself rotates only on Plus and Max smartphones. Therefore, if your smartphone is not with a larger screen, then the auto-rotate function will work only in applications, but not in the menu.

If you have an iPhone Plus or Max, but the rotation of the worker has stopped working, then this is due to the interface settings. To fix this problem:

  • Go to “Settings” → “Display and brightness” → “View”.
  • Select the “Standard” mode. Only in this mode will auto-rotate menu work. When you select the enlarged mode, the desktop will not rotate. It displays the icons in a larger size, so the ability to rotate them is disabled.

This is how easy it is to adjust the rotation of your iPhone’s screen. Choose the settings as you like and use your smartphone the way it is convenient for you.

How to turn screen rotation on and off iphone 11/pro

Reboot

The usual restart of the phone helps to restore the operation of the mobile device to normal mode. The task is to be completed as follows: simultaneously press the power button and the Home button. They are located differently on different models, so the photos below will help you to understand the nuances in detail. The arrows indicate the buttons for iPhones up to 7, when pressed, the smartphone will reboot.

ALL iPHONES: HOW TO TURN ON/OFF SCREEN ROTATION

For brand new iPhones, such as iPhone 8, iPhone X, iPhone XR, iPhone 11, the restart will occur after pressing the two volume buttons (volume down) and the power button, as shown in the photo.

Configuring auto-rotate screen

The factory settings are for automatic screen rotation by default. This is convenient, but not in all cases. For watching videos, using games and applications, it is more comfortable to have a static image on the display, which is also called horizontal or landscape.

To the annoyance of the owners of gadgets, the auto-rotate function of the display sometimes starts to malfunction. Discomfort can be expressed in the fact that the screen becomes static, or, conversely, begins to arbitrarily change its position from vertical to horizontal, and vice versa. Solve the problem on your own: how to adjust the screen rotation on the iPhone. it will work if you take certain measures.

Update operating system (iOS)

System errors of the OS itself can cause inadequate operation of a mobile device. This also applies to auto-rotate the screen. Updates coming from the provider are required for iOS. In their absence, the system is not able to fully implement self-regulation. Therefore, you should check for available innovations and install them. The following steps must be taken sequentially:

  • Go to “Settings”.
  • Open the “General” tab.
  • Select the item “Software update”.
  • Click “Download and Install” and wait for the download to complete.
  • Install the update by selecting “Install”. After which the mobile device will be automatically rebooted.

How to turn off auto-rotate on iPhone

Modern smartphones are equipped with an automatic screen rotation function. It is convenient to use a mobile device when it itself reacts to a change in the position of the body. But sometimes it gets in the way. This article will tell you: how to disable auto-rotate on iPhone, in clear and simple language. And also about possible malfunctions due to which this function is inactive.

Enabling / disabling screen scaling

The peculiarity of screen scaling is that the size of the pictures on the screen becomes enlarged. To activate the mode, you will need:

  • Open “Settings”.
  • Click on the item “Screen and brightness”.
  • Select “View” from the proposed list.
  • Use the “Zoom” key, then “Install”.

You should be aware that a function in a mobile phone that allows you to enlarge the image on the display comes into conflict with the auto-rotate of the display. That is, increasing the size of the symbols on the home screen (springboard) will block changes in the orientation of the desktop. But it will not affect the operation of applications, where the automatic rotation will remain. It’s easy to get back to normal mode.

To turn off the zoom function, you must:

  • Go to “Settings”.
  • Select the menu item “Screen and brightness”.
  • In the “Scale” section, click on the “Standard” and “Install”.
  • Confirm selection by clicking on “Standard” in the opened dialog box.
  • The device will reboot and start working normally.
READ  How to connect Samsung buds to iPhone

Auto-rotate screen is missing on iPhone. reasons

The lack of auto-rotate screen in iPhone is due to various circumstances. The simplest and most common “breakdowns” are eliminated without much difficulty. They are hidden in the phone settings. The possibility of a technical malfunction is not excluded. Then you will need the help of a specialist.

  • Screen rotation lock enabled.
  • Screen scaling function enabled.
  • In some iPhone models, some applications have a static image.
  • Defective accelerometer.

How to turn off auto-rotate screen on iPhone

Settings

Unlike other iPhone models, which rotate the image only in supported applications, the Plus series is capable of completely changing the orientation from portrait to landscape (including the desktop).

If you do not want the icons on the desktop to change orientation, but at the same time auto-rotate works in applications, set the value to “Increased”, and then save the changes by clicking the “Set” button.

  • Accordingly, in order for the icons on the desktop to be automatically transferred to portrait orientation again, set the value to “Standard” and then tap on the “Install” button.
  • Thus, you can easily configure auto-rotate and independently decide when this function works and when not.

    Bookmark the site Lumpics.ru and we will still be useful to you. Thank the author, share the article on social networks.

    Control point

    The iPhone has a special quick access panel to the main functions and settings of the smartphone, which is called the Control Center. Through this, you can instantly enable and disable automatic screen orientation change.

      Swipe up from the bottom of the iPhone screen to display the Control Panel (it doesn’t matter if the smartphone is locked or not).

  • The active blocking will be indicated by an icon that has changed its color to red, as well as a small icon located to the left of the battery charge indicator. If later you need to return auto-rotate, just tap on the icon on the Control Panel again.
  • Disable auto-rotate on iPhone

    Auto-rotate is a feature that automatically switches the screen from portrait to landscape mode when you rotate your smartphone from vertical to horizontal. But sometimes this can be inconvenient, for example, if there is no way to hold the phone strictly vertically, the screen will constantly change orientation. You can fix this by simply disabling auto-rotate.

    articles on this topic:

    It didn’t help to get rid of the auto-rotate

    The interface does not depend on the model, but on the iOS version, so the instructions presented in the article are suitable for all iPhones, if we talk about the “Option 1” part. Disabling the automatic rotation of the display is carried out in the control center, while in some applications (for example, games) the screen will be forced to rotate simply because there is no other orientation there and cannot be. But the settings, which are described in the “Option 2” part, are absent in both iOS 12 and the current iOS 13. In the accessibility settings there is an option to enlarge the display, but this has nothing to do with the topic of the article.

    If the control point does not have a button to enable and disable auto-rotate, open the “Settings” section, go to the “Control Center” section, then click “Customize controls”, find “Auto-rotate” there and add it by clicking on the green plus sign next to the corresponding item.

    Ask a question or leave your opinion Cancel comment

    How to disable / enable screen rotation on iPhone

    In this article, we will tell you how to control (disable or enable) screen rotation in different versions of the iPhone while holding the smartphone in landscape orientation and for what reasons this function may not work.

    It should be noted right away that first of all, support for screen rotation in the iPhone should be implemented by the software developer. That is, not every game or application allows you to use your smartphone in landscape orientation.

    Why is screen rotation not working on iPhone (all iPhone models)

    The main reason the iPhone screen refuses to work in landscape orientation is an accidentally pressed lock switch in Control Center.

    Open Control Center disable Orientation Lock.

    An active orientation lock in iPhones equipped with a Touch ID button will be indicated by the corresponding icon in the menu bar.

    Unfortunately, this icon is not available in the menu bar on iPhones equipped with Face ID.

    How to disable / enable screen rotation on iPhone

    By default, screen rotation in iOS is enabled on all iPhones. The most commonplace way to enable the orientation change lock is the option located in the Control Center. When pressed, the screen will always remain in portrait orientation.

    In enlarged Plus versions of older iPhones, in addition to changing the orientation of the application screen, there is also the ability to rotate the iOS desktop (this does not work in Max versions of the iPhone).

    Why iOS desktop rotation doesn’t work on Plus-versions of iPhone

    If you suddenly notice that the rotation of the iOS desktop has stopped working in Plus-versions of the iPhone (this does not apply to the Max-models of the iPhone), then the problem probably lies in the mode of displaying icons on the springboard (home screen).

    Follow the path: Settings → Display and brightness → View.

    In addition to the Standard display of iOS interface elements, there is also Zoom. In Magnified mode, all interface elements, including the icons on the springboard, become slightly larger, and the display rotation feature on the desktop will be disabled. At the same time, in all applications, everything will rotate normally.

    To reactivate desktop rotation, go to the Standard tab and click Install. The installation process will take a few seconds.

    How to take a mirror image on iPhone?

    • Tap an item to select it, then tap.
    • Tap Arrange, then tap Flip Vertically or Flip Horizontally. If you don’t see these options, swipe up from the bottom of the controls.

    How to enable auto-rotate screen on iPhone in settings?

    Find the Settings app on your desktop and open it. In the “General” section, check the “Lock orientation” checkbox. In this case, the auto-rotate screen is turned off, that is, the lock is turned on.

    Why is screen rotation not working on iPhone?

    Why iPhone screen does not rotate, how to fix it? … To do this, open Settings → Display and brightness → in the Display enlargement section, go to the View section. Switch “View” to “Standard” mode. After this action, the device will reboot.

    Turn off screen rotation?

    How to disable screen rotation in Android

    • Go to settings.
    • Select the “Screen” section.
    • Uncheck the “Auto-rotate Screen” flag.

    What is screen repeat on iPhone?

    What is “mirroring” (screen mirroring, screen mirroring, mirroring) AirPlay. AirPlay Mirroring. the ability to duplicate the screen display of a Mac or iOS gadget to a receiver (Apple TV) with AirPlay support. This functionality is supported by both iPhone and iPad, and Mac.

    How to turn off screen repeat on iPhone?

    To completely fill the TV screen, change the aspect ratio or scale in its settings. To stop mirroring the screen of your iOS device, open Control Center, select Screen Mirroring, then select Stop Mirroring. Or press the Menu button on your Apple TV Remote.

    How to disable screen rotation on Samsung?

    Go to “Settings” and find the “Screen” section. Here we uncheck the “Auto-rotate screen” item. Please note that not all devices can turn off screen rotation through the “Settings”. This is what the button for disabling the function looks like in Samsung devices under the curtain.

    How to rotate the screen?

    Open “Settings” on your device; Select “Screen”; Turn Screen Rotate On or Off.

    Turn screen rotation on and off in iPhone 7

    For iPhone 5s, 6, 7, 8, the rotation setting in iOS 11 is still done by pressing a button. portrait orientation lock. To find it, we do the following:

    The lock screen icon in iPhone 7 with iOS 11

    The appearance of the screen lock button or the menu itself may differ if you are using previous iOS firmware or earlier iPhone models, then look here. screen rotation before.

    If the button is not active (as in the picture above), then you can turn your iPhone on its side, the screen with a movie or clip will also turn, stretching across the entire display in horizontal scanning.

    But if you lie on your side and want to read from your iPhone in this position, you will have to use the screen rotation lock so that it does not spin. By pressing a button, you turn off the rotation of the screen, which is not just locked, it is locked in portrait orientation and this is an unfortunate solution. Lying on your side, you can’t watch YouTube reviews in full screen.

    About saving video from the Internet to iPhone, see. here.

    So listen to Apple here. you just need to make a screen lock, without being tied to a book scan, then it will be much more convenient.

    Setting iPhone screen rotation in iOS 11

    Especially for those who recently bought an iPhone or updated the firmware to iOS 11, here’s how to set up screen rotation for any iPhone model. Screen rotation is most often used to watch video from a smartphone screen, horizontal viewing of a movie or a YouTube video is more comfortable for the eye.

    Wide or panoramic photos are also better viewed when the iPhone is placed horizontally. Auto-flip to the side enables the engineering mode in the calculator.

    Horizontal screen mode on iPhone Plus models

    A lock icon that blocks the rotation of the screen is also present on iPhone models with the Plus prefix. So for the pros, everything works exactly the same.

    But in the iPhone 6 Plus, 6S Plus, 7 Plus, 8 Plus, a function has been added to rotate the desktop with icons to horizontal mode (also called landscape mode). If such a model is turned on its side, then all the icons and wallpapers, having turned over, will adjust to the horizontal position of the display.

    If in Plus the auto-rotate of working screens with icons does not work, then perhaps you are using a larger scale, with larger elements, including icons. This mode can be disabled in the Settings app:

    • Screen & Brightness. View. Standard. Set

    The phone will reboot after confirmation. The 5.5-inch iPhone Plus should now re-enable auto-rotate screen icons.

    BICBON.COM 2021