How to turn on speaker on iPhone

Table of Contents

How to check the volume of the earpiece?

To increase the volume of an Android smartphone, you need to dial the command ### (in some individual phone models it may be different. use Google). In the opened engineering menu, you need to scroll through the top menu, then go to the Hardware Testing section, and then to Audio.

Where is the iPhone 7 microphone?

The iPhone 7 has 3 microphones: main and 2 auxiliary. The device used when talking on a mobile phone is located on the bottom edge of the case, to the left of the connector for the charging cable. Auxiliary microphones are located near the cameras.

What to do if the speaker on iPhone becomes quieter?

  • Make sure that Do not disturb mode (Settings. Do not disturb) and Silent mode (switch on the side of the iPhone) are disabled.
  • Reboot iPhone and set the sound level to maximum.
  • Disable Bluetooth if other accessories are paired with it.

Where are the speakers on the iPhone 11?

The smartphone’s dual speakers are located at the bottom of the bezel and in the cutout above the screen. At the same time, the lower speaker is much louder and clearer than the speaker in the bangs. Also on the underside is the Lightning connector.

How to turn on silent mode on iPhone

An easier option is to use the silent mode button on the iPhone. Yes, yes, the developers have installed a separate key for this, which is located on the left side of the smartphone, just above the volume control.

Normally, the switch directs all sounds to the speaker of the device. To turn on silent mode on iPhone, slide it as shown in the figure. If done correctly, an orange background will be visible. In this mode, the device will not sound any notifications or calls. By default, the device will alert the call / notification by vibration.

Vibration setting

If you want to fine tune this mode, you need to refer to the settings. Before the 7th model, to do this, you must first go to the “Settings” item, and then open the “Sounds” section. On devices with the seventh iPhone and newer, another sub-item is used, which is called “Sounds, tactile signals”.

At the very beginning, it is indicated when the apparatus should use vibration. If you want it not to hum when activating the Silent function, move the corresponding slider to the left to disable it. An alternative is to change the vibration pattern. You can choose from preset sequences or program your own. In the latter case, use the “Create vibration” sub-item, and then draw the desired signal pattern by touching your finger in the graphic mode.

In the same section, you can get rid of other sound signals. For example, if you want to not only remove ringing / vibration, but also disable clicks of the virtual keyboard when typing or the signal that is given when the system is locked or unlocked. In this case, scroll through the settings to the appropriate item and deactivate it.

Features of silent operation

Please note that this silent mode on iPhone 6 and later does not affect other sounds. Accordingly, if you set the alarm clock in the “Clock” program, it will still play. The same applies for playing music or special effects in games.

Another feature is that if you make the silent mode on the iPhone as described above, when a headset is connected to the smartphone, then the sounds in it will still be heard. That is, the “silent” button only affects the sound reproduction through a regular speaker.

turn, speaker, iphone

Finally, keep in mind that in silent mode of use, the smartphone will still automatically turn on the screen when a new message arrives or when it is necessary to show a notification. This won’t hurt if the iPhone is in your or bag, but if it’s in sight, this behavior can be distracting.

How to turn on silent mode on iPhone

Apple makes premium smartphones, but sometimes some of the functions are difficult to figure out. from the habit after Android or just at the initial stage of use. For example, how to turn on silent mode on iPhone, as well as how to customize it to suit your needs. Immediately, we note that you can get rid of unnecessary sound in two ways, differing in complexity and capabilities.

Do Not Disturb Mode

As you can see, there are many limitations to using a mechanical switch. Therefore, Apple has provided another way, how to turn on the silent mode on the iPhone. And even without displaying notifications and other distractions, in order to maintain the blocking state to the maximum and not once again distract the owner’s attention. for example, at an important meeting, during class, or while the owner is meditating.

The name of this function was given by the speaker. “Do not disturb” mode. The easiest way to activate it is using the control panel. To do this, make a swipe from the bottom up, from the bottom edge of the display (in the iPhone X, everything was slightly altered, the swipe must be done from the upper right corner).

Next, lightly tap the crescent moon icon to enable / disable. When activated, the icon will be highlighted.

Also, directly from the control panel, you can go to quick settings. To do this, you do not need to touch the icon, but press it with some effort. The system will display a menu with various options. activate for a specific time while you are in the same place or for the period of a scheduled event.

Another way how to set iPhone to silent mode is through settings. A special item is highlighted under it in the phone’s menu. It is convenient in that it allows you to more accurately change the parameters of the mode.

For example, you can put the device into a permanently quiet mode. If you need to specify a specific time frame, use the “Scheduled” radio button and then specify the period. It’s so convenient to turn off notifications at night.

Additionally, you can specify a list of contacts, calls from whom the phone will allow you to attract your attention. To do this, select the appropriate item and mark “favorites”.

detailed settings can be found in the official Apple help: https://support.Apple.com/ru-us/HT204321.

In addition to turning off alarms more efficiently, the Do Not Disturb mode solves the question of how to turn off the sound on the iPhone if the button does not work. because it is activated independently of the keys.

How to restore default apps on iPhone?

Recovering a firmware that has been removed

  • On an iOS device, open the App Store.
  • Search for a program. Be sure to use the exact name of the program.
  • Click the icon to restore the program.
  • Wait for the program to recover and then launch it from the Home screen.

Where are the voice recorder files stored on Xiaomi?

We are looking for the voice recorder application on the phone’s desktop and open it. In it, click on the three stripes to the right of the record button. In the menu that opens, both the folder with the recorded calls and the recordings made in the voice recorder are available.

How to record a phone conversation?

How to record a phone conversation on Android?

  • Call recorder. One of the most popular conversation recording software that can be found on Google Play.
  • CallRecorder. The next way to record telephone conversations is the CallRecorder application.
  • Call Recorder.
  • Total Recall Call Recorder.
  • Call recording

Is it possible to record a phone conversation on iPhone?

If your iPhone has a jailbreak (open access to the file system), then you can install several “tweaks” that allow you to record conversations. In particular, these are the Audio Recorder 2, CallRecorder and Super Recorder extensions. You can also turn on auto-recording so that all conversations are automatically saved to audio files.

How to Find Voice Recorder in Samsung Phone?

  • On one of the desktops or on the application screen of the Samsung smartphone, we find the “Samsung” folder.
  • Open the “Sound Recorder” application.
  • To start recording sound, just click the button at the bottom in the form of a red circle.
  • Tap the black square button on the right to end recording.

How to enable voice recorder on Android?

  • Open the menu and find “Voice Recorder” in the list.
  • Click “Allow” to allow the application to record audio and grant other rights (access to files, phone calls).
  • Open “Recording Settings”.
  • Step 6.

What to do if the speaker does not work after water?

  • Leave the gadget on a windowsill in sunlight or near a battery.
  • Wrap tightly with a towel.
  • Place the phone in a jar of rice and let it lie down.
  • Dry with a hairdryer, but very carefully so as not to overheat the smartphone.

What to do if iPhone shows that headphones are connected?

The most common cause of iPhone locked in headset mode is dust or dirt that gets into the 3.5mm jack. The solution in this case is the simplest cleaning of the connector with any thin object, for example, a needle or a toothpick.

How to Exit Headphone Mode in iPhone?

How to turn off headphone mode on iPhone?

  • Reboot the device (in all incomprehensible cases I do this);
  • Mechanical damage to the socket or blockage. Inspect and clean with alcohol;
  • Turn on and off the speakerphone;
  • Press the volume buttons.

How to increase the speaker volume on iPhone?

Go to Settings → Music → Equalizer and select the Late Night preset. The iPhone sound will then change and become louder. Depending on the smartphone model, this can be a gain of 5-10%.

How To Set Speakerphone Mode To Automatically Activate On iPhone Calls

What to do if speaker is not working on iPhone?

If the speaker on the iPhone does not work or there is no sound in the headphones, contact the PlanetiPhone service.

  • IPhone 4S charging connector replacement 30 minutes
  • Replacing the hearing speaker iPhone 430 minutes
  • IPhone 4 speaker replacement 15 minutes
  • Replacing the microphone 1190 rub.
  • Replacing the audio codec
READ  How to Connect Locked iPhone to iTunes

How to increase the speaker volume on iPhone?

  • Go to the Library section, Preferences tab. In the com. Apple. celestial.
  • The plist document is then edited. There you will see the name of the regions and the value of the sound. For example, it could be 83%. You need to set 100% (number 1).
  • Reboot your device. After that, the smartphone should give out sound at full strength.

What to do if there is no sound on iPhone on a call?

No sound on incoming call on iPhone. Do Not Disturb is activated If the ringtone on your iPhone stops ringing, check to see if Do Not Disturb is turned on. The beep should now reappear. You can change the Do Not Disturb settings by going to Settings → Do Not Disturb.

What to do if iPhone shows that headphones are connected?

There may be several reasons why the iPhone thinks that the headphones are connected: The headphones were disconnected at the moment when some internal system operations were taking place; Using a headset or headphones of poor quality, which adversely affects the operation of the device as a whole; 3.5mm jack defect.

How to turn on sound on iPhone during a call?

The Ring / Silent switch is on the left of the iPhone. Change ringtones, sounds, and vibration

  • On iPhone 7 and later, go to Settings> Sounds, Tactile Cues.
  • Select the option you want, for example “Ringtone” or “New mail”.
  • Tap the selected alert sound.

How to increase the volume of the earpiece on Xiaomi?

  • Go to phone settings and select “Advanced settings”.
  • Find the Headphones and Sound Effects section.
  • Disable Mi Sound Enhancer (if activated).

How to turn on speaker on iPhone

Sound on iPhone models from 2g to iPhone X and 8 plus is extracted from two speakers. Consider them.

One is used for conversation, and is at the top of the screen. Through the narrow horizontal opening of the display glass and the mesh, sound passes from the internal speaker, which in turn is screwed to the display and pressed to the contacts of the cable, on which, in addition to the speaker, there are a front camera and light sensors to adjust the brightness of the display.

This speaker. so called speaker, mainly used only for mobile phone conversation like standard GSM. as well as for Internet calls via viber whatsapp skype programs, etc.

The second speaker is used for speakerphone and loud reproduction of sounds and music. It is much larger and stronger in power. It is located near the charging socket on the right side, and is also covered with a protective mesh. which protects the speaker from dust, debris, sand and liquid.

The iPhone 7 and 7 plus has an innovation. stereo sound for music and video playback. And everyone wondered if the engineers had created an iPhone with three speakers, or the iPhone had two speakers left, and the speaker became louder and more versatile.?

The answer is number two. stereo sound is extracted from two speakers: the lower and upper speaker-a.

In general, we have already figured out how many speakers and where they are on the iPhone. It remains to disassemble the types of their breakdowns and repair options.

The simplest thing is that the sound of the speaker in the iPhone has become quiet. Such a breakdown usually manifests itself if any kind of liquid gets into the speaker hole and the protective mesh located there. The sticky and viscous liquid immediately clogs the holes and holes in the mesh. thus closing the passage for sound, and possibly nailing the speaker membrane.

You can try to quickly repair such a breakdown at home without disassembling the iPhone by dropping a drop of alcohol or any other non-aggressive degreaser on the mesh and brushing it with a toothbrush.

This option saves with a probability of 70%, but it happens that you still have to disassemble the phone and change both the mesh and the speaker.

If the sound has disappeared completely from the earpiece, you need to make sure that the iPhone has not switched to headset mode. To do this, when you call, you need to press the volume button and see the message that appears on the iPhone screen. If the inscription “headphones” appears under the volume scale. this indicates that the speaker is simply turned off by the system, and the iPhone thinks that headphones or a headset are connected to it.

Repair of such a breakdown is solved either by replacing the lower loop, or by soldering the elements on the board that are responsible for switching the sound modes of the smartphone.

If the earpiece does not work and the sound mode is standard, we try to disassemble the iPhone and change the speaker itself and / or the cable to it.

Few people know that iPhones shipped to Europe through official channels have a factory volume limit. This requirement is primarily due to EU laws, according to which the sound power in headphones cannot exceed 100 dB. According to scientific studies, listening to music at loudness levels above 90 dB can have a truly irreversible effect on hearing. Despite the fact that for most markets Apple does not limit the volume in its smartphones in any way, we still advise you to do it yourself.

Today, almost all playback devices (including iPhones) and headphones are capable of providing very high sound pressure levels, sometimes exceeding all permissible standards. This is especially true for open-type headphones like EarPods or Airpods, where noise isolation is absent as a class. As a result, in a busy place it is easy enough to exceed the limit without even noticing it. Fortunately, the iOS mobile operating system is well placed to manually set the limit. Let’s find out how to do it.

So how to limit the maximum volume of iPhone and iPad?

  • Launch “Settings” and go to the “Music” section on your device.
  • We find the item “Playback” and go to the “Volume Limit”.
  • Here it will be necessary to set an acceptable volume level for you. To do this, drag the “Maximum volume” slider. The recommended indicator is 70-80% of the total volume.
  • Next, go to “Settings” → “Screen Time” → “Content and Privacy”.
  • In the “Allow changes” section, go to the “Volume limit” menu item.
  • It remains only to check the box opposite the option “No”.

All is ready! In order to return everything as it was, it is enough to set the slider in the menu “Settings” → “Music” → “Volume Limit” to the maximum, before that turning off the corresponding option in the “Screen Time”.

Many have found themselves in a situation when, during a trip, it turns out that they have forgotten the Bluetooth speaker at home. Or, for example, while preparing lunch, the user tries to listen to a podcast, but nothing is heard due to the gurgling of the tap and the hiss of the frying pan. There are many situations where you need to turn up the volume on your iPhone, but there is no way to use a bluetooth speaker or headphones.

How to instantly jump to the first or last photos in the Photos app on iPhone and iPad.

Here are five free and easy ways to make your iPhone a little louder.

Equalizer Late Night Mode

Select Settings → Music → Equalizer and then Late Night Mode. Of all the EQ modes available on the iPhone, this is the loudest. However, if the sound on the iPhone is at its maximum, you may hear slight distortion when operating in this mode.

How to properly shade secret data on screenshots in iPhone so that they cannot be seen.

Flip iPhone

The speakers on iPhone are at the bottom of the device. To increase the volume, simply turn the device over so that the sound is not drowned out by any surface or object, such as a table top. This will make the sound a little louder and cleaner. With your iPhone propped up, also make sure the speaker is facing up.

Equalizer: add bass (low frequencies) when listening to music on iPhone and iPad.

Roll your palm around the iPhone speaker

This method is good if you hold the iPhone in your hands, for example, to watch YouTube. Just curl your palm in a semicircle near the speaker and sound waves can bounce off your hand towards your ears.

How to make and install a ringtone (ringtone) on any iPhone without a computer right on the device?

Place iPhone in a bowl

This trick has been around for many years. Just place your iPhone in a bowl with the speaker facing down. Sound waves will bounce off the bottom and sides of the selected cookware, thereby increasing the volume.

Why iPhone Flashlight Won’t Turn On?

There are 3 common reasons why the flashlight on an iPhone might not work:

    Penetration of moisture into the case. Mechanical damage to the device, such as by falling. Software error caused by installing “left” firmware or inept jailbreak.

The user will be able to solve the problem caused by a software error on his own. it will be enough for him to restore the iPhone from a backup created at the time when the flashlight was working. If there is a physical malfunction of the device, it is better to seek help from professionals. service center specialists.

How to turn on the flashlight on iPhone?

The iPhone’s rear camera flash can be used not only for its intended purpose. it can also act as a flashlight. You can turn on and off the flashlight on the “apple” device with just a couple of taps. how is it done??

Surprisingly, a feature as simple as a flashlight first appeared only on iOS 7. Previously, iPhone users had to download third-party programs and tweaks from Cydia to make their mobile devices shine in the dark.

It’s easy to turn on the flashlight on a modern iPhone. In the article we will tell you how to proceed, as well as describe the problems that can lead to the inoperability of the flashlight.

How to turn off the flashlight on iPhone?

Turning off the flashlight on an iPhone is done in much the same way as activating it. You should open the “Control Center” and click on the same icon, which, if the flashlight is on, glows white. After pressing, the icon will change color to gray, and the flashlight will stop burning.

Geeks from the Reddit site discovered another way to turn off the flashlight on the iPhone. relevant for iOS 7. You need to click on the “Home” button to highlight the locked screen of the device, then click on the icon with the image of the camera located in the lower right corner.

Obviously, this is not an option provided by the manufacturer, but a bug. it will no longer be possible to disable the flashlight in this way on gadgets with the latest versions of iOS.

How to turn on the flashlight on iPhone?

You should activate the flashlight on the “apple” gadget like this:

Display the “Control Center” with a swipe from bottom to top (you can also on a locked device).

Click on the flashlight icon in the lower left corner.

You can turn on the flashlight in this way on the iPhone of all generations, starting from the 4th. There is no flashlight on the iPhone 3GS and cannot be, because this gadget does not have a flash on the rear camera.

iPhone 6S and subsequent models received an interesting feature. Thanks to the 3D Touch function, the user of one of the latest Apple devices is able to adjust the light intensity of the flashlight. To do this, just open the “Control Center” and press the flashlight icon with force. A menu like this will appear:

The user can choose one of 3 modes: “High light”, “Medium light”, “Low light”.

Even if any of the modern iPhones has a built-in flashlight, no one forbids the owners of “apple” gadgets to use flashlight applications from the AppStore. Third-party programs are much more functional than the ascetic built-in tool: if you want the light to pulsate or transmit an SOS signal in Morse code. please! The best flashlight apps for Apple devices are Flashlight, SOS My Location, Flashlight. (always with a dot at the end).

How to turn off headphone mode in iPhone

In iPhones, as in iPads, there are two volume modes. Headphones and Ringer. On the one hand, this is convenient, since these two modes exist each on their own, which allows you to remember the volume level of each mode. For example, we listened to music in headphones with a volume level of 50%, turned off the headphones and got into the Call mode, where the volume level set earlier is 100%, and you don’t need to turn up the volume to hear the ringtone of an incoming call well. After some time, I decided to listen to music (instructions for downloading music), plugged in the headphones and did not go deaf, since again the volume level went 50% on its own, i.e. the value last set for this mode. The volume mode is displayed on the screen in the form of a pop-up window with a bell (or speaker) when headphones are connected and disconnected from the iPhone.

READ  How to Transfer Videos from iPhone to Android

But sometimes, iPhone users are faced with the problem of automatic mode change. It happens as follows: after disconnecting the headphones from the iPhone, the phone does not go into Call mode, while remaining in the Headphones mode, while there is no sound in the iPhone. There can be several reasons for a failure in volume modes. dirt, dust, water, excessive moisture getting into the connectors, and finally mechanical damage. In such cases, users have a question. how to turn off the headphone mode in the iPhone on their own?

Buyers of used (second-hand) Apple phones, be sure to check if the automatic volume mode switching in the iPhone works.

For this, it is advisable to have any headphones with you. We turn on the headphones and listen to the clicks of the virtual keyboard (or the sound of blocking) in them, and the sound of the clicks should sound only in the headphones (if, in addition to the headphones, the sound of the clicks is emitted by the phone itself, then this is a malfunction). Unplug the headphones, now the click sounds should be emitted by the iPhone speaker. If you do not have headphones with you to check, then unlock the screen and press the volume buttons on the side of the iPhone, while the volume indicator should be in the Call mode. If, when the headphones are disconnected from the jack, as a result of pressing the volume buttons, the indicator displays the mode. Headphones, then this is a failure or malfunction. If there is no sound in your iPhone without headphones and by adjusting the volume level we see the Headphones mode, then it is advisable to contact the service center for help. But, at your own peril and risk, you can try turning off the headphone mode in the iPhone yourself at home. Choosing the method below, first analyze the previous failure of the manipulation with the phone and remove the case.

  • Charging cable and reboot. The first thing to try is to connect the charging cable to the iPhone (without headphones), turn off the phone and turn it on again. If it does not help, then we do the same, but with the power adapter plugged into the outlet and instead of off / on. applying a hard reboot.
  • Toothpick. If you practically did not use headphones, then the iPhone connectors may be clogged, they can become clogged with dust and even pieces of clothing, and the contacts may become dirty. In good lighting, examine the headphone jack and remove it with a toothpick, as well as the charging connector, clean the Lightning with a corner of paper. In addition to a toothpick, they use a corner of paper, a needle, a cotton swab, alcohol, the main thing is not to make it worse.
  • A vacuum cleaner. If the iPhone could fall into the snow, get wet, then a vacuum cleaner will help, in general, we vacuum all the connectors. Thus, pulling out moisture. If a lot of time has passed since the moment the snow or water hit, then the contacts may oxidize and the vacuum cleaner will not help. You can use a vacuum cleaner to collect dust residues even after a toothpick.
  • Reset. How to reset settings and content read here. “Reset to iPhone”
  • Hair dryer. In the case of water and snow, a hairdryer is sometimes used after vacuuming to dry the connectors.
  • Refrigerator. Well, the most frostbitten option is to put the iPhone in the refrigerator for 5-10 minutes.
  • Readers’ advice. Some readers of this manual suggested their own ways to solve the problem: one, two, three, four, five, six, seven, eight, nine, ten, eleven.

All these methods have helped people to turn off the headphone mode in iPhone 4, 5, 5s 6, 7 and other models without resorting to the service. The main thing is to do everything carefully without fanaticism and pressure. If you are afraid, then bring it to the SC. About which method helped you, write in the Комментарии и мнения владельцев.

Silent mode

To put iPhone in Silent mode, slide the switch to the position where the orange mark is visible.

Do Not Disturb Mode

As you can see, there are many limitations to using a mechanical switch. Therefore, Apple has provided another way, how to turn on the silent mode on the iPhone. And even without displaying notifications and other distractions, in order to maintain the blocking state to the maximum and not once again distract the owner’s attention. for example, at an important meeting, during class, or while the owner is meditating.

The name of this function was given by the speaker. “Do not disturb” mode. The easiest way to activate it is using the control panel. To do this, make a swipe from the bottom up, from the bottom edge of the display (in the iPhone X, everything was slightly altered, the swipe must be done from the upper right corner).

Next, lightly tap the crescent moon icon to enable / disable. When activated, the icon will be highlighted.

Also, directly from the control panel, you can go to quick settings. To do this, you do not need to touch the icon, but press it with some effort. The system will display a menu with various options. activate for a specific time while you are in the same place or for the period of a scheduled event.

Another way how to set iPhone to silent mode is through settings. A special item is highlighted under it in the phone’s menu. It is convenient in that it allows you to more accurately change the parameters of the mode.

For example, you can put the device into a permanently quiet mode. If you need to specify a specific time frame, use the “Scheduled” radio button and then specify the period. It’s so convenient to turn off notifications at night.

Additionally, you can specify a list of contacts, calls from whom the phone will allow you to attract your attention. To do this, select the appropriate item and mark “favorites”.

detailed settings can be found in the official Apple help: https://support.Apple.com/ru-us/HT204321.

In addition to turning off alarms more efficiently, the Do Not Disturb mode solves the question of how to turn off the sound on the iPhone if the button does not work. because it is activated independently of the keys.

How to Use an iPhone Speakerphone

The Ring / Silent switch is on the left of the iPhone. It can be used to control the sounds played through the iPhone speaker.

Call mode

To put iPhone in Ring mode, slide the switch to the position where the orange mark is not visible.

Putting iPhone into Ring / Silent Mode

When the iPhone switch is in the Ringer position, ringing tones, notifications, and sounds play through the iPhone speakers.

Setting the toggle to Silent mode does not play ringtones or notifications through the iPhone speakers, but does not muffle other sounds and vibrates.

These settings only affect the performance of the iPhone speaker. If you are using a headset with your iPhone, sounds will play through the headset even in Silent mode.

Vibration setting

If you want to fine tune this mode, you need to refer to the settings. Before the 7th model, to do this, you must first go to the “Settings” item, and then open the “Sounds” section. On devices with the seventh iPhone and newer, another sub-item is used, which is called “Sounds, tactile signals”.

At the very beginning, it is indicated when the apparatus should use vibration. If you want it not to hum when activating the Silent function, move the corresponding slider to the left to disable it. An alternative is to change the vibration pattern. You can choose from preset sequences or program your own. In the latter case, use the “Create vibration” sub-item, and then draw the desired signal pattern by touching your finger in the graphic mode.

In the same section, you can get rid of other sound signals. For example, if you want to not only remove ringing / vibration, but also disable clicks of the virtual keyboard when typing or the signal that is given when the system is locked or unlocked. In this case, scroll through the settings to the appropriate item and deactivate it.

How to turn on silent mode on iPhone

An easier option is to use the silent mode button on the iPhone. Yes, yes, the developers have installed a separate key for this, which is located on the left side of the smartphone, just above the volume control.

Normally, the switch directs all sounds to the speaker of the device. To turn on silent mode on iPhone, slide it as shown in the figure. If done correctly, an orange background will be visible. In this mode, the device will not sound any notifications or calls. By default, the device will alert the call / notification by vibration.

Change ringtone and vibration mode

On iPhone 7 and later, you can control the ringing and vibration settings from the Settings Sounds & Tones screen. On older iPhones, go to Settings> Sounds.

By default, the volume for ringtones and notifications matches the volume configured for audio playback. To control the ringtone and notification volume separately from other programs, turn off Change with Buttons. If Change with Buttons is disabled, you must manually adjust the ringtone and notification volume in the Settings Sounds, Tactile or Settings Sounds menu.

On the same screen, you can choose whether the iPhone should vibrate when you select Ring or Silent. If you turn off both options, the iPhone will not vibrate.

How to set silent mode on iPhone

Apple makes premium smartphones, but sometimes some of the functions are difficult to figure out. from the habit after Android or just at the initial stage of use. For example, how to turn on silent mode on iPhone, as well as how to customize it to suit your needs. Immediately, we note that you can get rid of unnecessary sound in two ways, differing in complexity and capabilities.

What you need to clean?

We only need 2 ingredients or tools:

  • Hard bristle brush. If you find a soft bristled brush, that’s okay. Just trim off the bristles, it will be hard at the base of the bristles. This is perfect for us. You can use a cotton swab, but it is worse in terms of effectiveness.
  • Some liquid with m alcohol. It can be cologne or alcohol itself. Available to use gasoline for lighters (high purity).

All this can be found in almost any home. Prepare a brush and liquid. Let’s say it will be gasoline.

How not to clean?

Some users don’t know how to clean the speaker on iPhone 6 and try to do it with a toothbrush, but they don’t need to. The toothbrush is very hard and has long fibers, so it can damage the mesh, which can later clog the speaker itself.

It is also advisable to use alcoholic solutions rather than the alcohol itself. Although the latter is also fine. But never use water. Water is oxidizable and is not a degreasing agent. Alcohol and alcohol-based solutions degrease the surface and resist oxidation, making it ideal for cleaning.

Alternatively, you can safely use disposable alcohol wipes, which are usually intended for hands. But be careful not to leave a piece of cloth on the speaker grill. Also, do not use alcohol-free wipes, because most wet wipes now do not contain alcohol, although they also degrease the surface a little. Some users try to do this with a toothpick. Do not use it to clean smartphones, no matter how. You can’t use a toothpick to clean your iPhone 6 speaker at home. You will simply break the mesh, which is not strong anyway.

Now you know how to clean the speaker on iPhone 6 S and other models.

How to clean the speaker on iPhone 6? The easy way

iPhone 6. is a problematic smartphone in terms of sound. Users often complain about poor sound. Such messages are usually teeming with various forums. Sometimes it is enough to simply blow through the speaker, and sometimes a weak sound is the result of a software flaw and is eliminated by software. But more often than not, the speaker needs to either be cleaned or replaced. Therefore, it is important to know how to clean the speaker on iPhone 6. This may well return your smartphone to its previous high-quality sound.

READ  How to prevent iPhone screen from turning off

How to clean the speaker on iPhone 6? Instructions

Pour gasoline into a small container. You need to pour just a little. The main thing is that the brush can be dipped in gasoline and moistened, no more. Do not allow gasoline to drip from the brush.

We moisten the brush and very carefully process the speaker mesh. You don’t need to disassemble the phone and take out the net. Simply moisten the assembled mesh of your phone with a brush. Repeat this procedure several times and very carefully. After the second or third cleaning with a brush, you will visually see that the speaker has become much cleaner.

After that, simply wipe off any remaining gasoline from the speaker grill and from the phone with a tissue. The smartphone should now perform better. Check if the interlocutor can be heard better. If not, then you have to clean the inside. This will require special tools. At the very least, you need a star screwdriver, which only people who repair phones and small electronics have. You also need the skills of disassembling and assembling smartphones, because when you remove the case cover, you can accidentally break the cable. Therefore, if you do not know how to clean the inside of the speaker on the iPhone 6, then it is better not to go inside, but to give the phone for repair.

Although the simplest external cleaning with a stiff brush and an alcohol-based solution usually helps.

Reasons for poor sound from the speaker

There may be several reasons. If water spills on the phone, the sound from the speaker is bad. this is a completely logical consequence. Also, the speaker could get clogged with dust, and even worse. sand. Therefore, remember if the device fell out on the sand on some beach.

It is worth noting that iPhones have a special metal mesh above the speaker. It serves as protection, but during operation it naturally clogs up.

Rarely does the software cause it. There are reports on the forums that the quiet sound issue has been resolved after a software update. So to get started, just try installing more recent software, or, if you don’t already have one, roll back to your previous iOS. If that doesn’t help, then here’s an article on how to clean your iPhone 6 speaker. Try to follow the tips.

How to keep the speaker from clogging?

Nothing new can be advised in this regard. Standard smartphone care tips are fine. Just don’t spill water on it, throw it in the sand, and try not to drop it at all. In any case, sooner or later the speaker will clog up, and the interlocutor will again be hard to hear, no matter how well you monitor the state of your smartphone. But now you know how to clean the speaker on iPhone 6 plus at home, and no blockages are scary to you. Use this method and recommend to your friends.

Causes of malfunction

There are only a few buttons on Apple smartphones. The main is the power button. It is she who is responsible for ensuring that you can turn on the device and begin to operate it. You also have to press it to lock and unlock the screen.

A broken button on an iPhone can be caused by the following reasons:

  • mechanical damage
  • failure of the loop (then a new loop is needed)
  • liquid entering the device
  • button sticking
  • software failure in the operating system without visible damage to the button

The button can sink and stop working after a strong press, so you should not make great efforts when turning on or locking the screen and press hard.

With a faulty “Power” key, you can use the iPhone for its intended purpose, but the comfort of use will greatly decrease.

What to do if you need to turn off your phone

If the power key breaks and stops working, and you need to turn off your smartphone, you can use several methods. There are two effective ways:

  • wait until the battery runs out and the smartphone turns itself off
  • turn off your phone using Assistive Touch

To find Assistive Touch on your phone, go to Settings, then General and find Accessibility, where the tab you want is located. Find there an icon labeled “Apparatus” and click on it. You will see the “Screen lock” item in the settings. Long and hard pressing on this icon will turn off the device.

How to turn on your smartphone

When the button is broken and the smartphone does not work, but it needs to be turned on urgently, there is only one proven method. To do this, you need a power outlet and an iPhone charger.

  • connect your smartphone to the charger
  • plug the charger into an outlet
  • wait 10-20 minutes if the battery was completely discharged

Connecting the switched off iPhone to the charger will trigger the device to turn on. If this does not happen even after 20 minutes of charging, and you see a black screen, you should exclude the breakdown of accessories. Check to see if the socket, wire or charger itself might be broken. Sometimes they are the root cause of the problem.

Sometimes you can try hard rebooting. To do this, you need to simultaneously hold down the Power button and the Home button. You must hold the button for 12-20 seconds until the Apple logo appears on the black screen. This method cannot work with a faulty button, especially if it is deformed or does not work due to mechanical damage.

Power button not working on iPhone

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

If the power button on iPhone isn’t working, you can still turn the device on and off using some tricks. A non-working “Power” button on a smartphone can cause a number of inconveniences, so this problem should be solved as soon as possible, especially if the breakdown was due to mechanical damage.

But if you urgently need to turn on the iPhone, and the button does not work and you cannot press it, use our recommendations.

How to fix a key

All the above recommendations for starting the iPhone if the faulty Power button does not work are a temporary solution to the problem. If the button on the iPhone breaks down due to mechanical damage, software failure of the operating system, you should contact an experienced technician who offers an affordable repair cost.

You will also need the help of a repair specialist if the button starts to sink after pressing hard. Self-intervention will only make the problem worse.

A technician with a low cost of repair will conduct a thorough diagnostics of the device in order to determine what caused the key to break. Specialists provide the following types of repair services:

  • replacement of the loop
  • replacing the button itself on the iPhone
  • elimination of software failure of the operating system

A new loop after mechanical damage or moisture ingress will eliminate the problem of the faulty button. Also, the wizard will perform all the necessary settings if the button breaks down due to a software failure and it does not work. The cost of the repair depends on the phone model and the reasons why the key refuses to work. Do not press the key hard after replacement to avoid re-damage.

If the power button on your iPhone isn’t working, you can’t fix it yourself. Replacing the loop and other elements is performed only with the help of the wizard. Order the services of masters with a low cost of iPhone repair through the YouDo service by filling out a simple application.

Now you know what to do if the power button on the iPhone does not work, and you urgently need to use it.

We fix the malfunction on our own

If you stop hearing the other person or he speaks very softly, start by checking the equalizer settings. First, adjust the volume during a call, making sure the indicator is displayed on the screen. Then make sure that no other devices are connected to the phone jacks. Insert and remove the headphone plug several times. Disable Bluetooth function.

To rule out the possibility of a software problem, you should uninstall new, recently installed software and reset all settings. Algorithm for hard rebooting the device:

  • press the “Home” and “Power” buttons at the same time
  • hold for 10-15 seconds
  • wait for the gadget to restart

If iPhone speaker still does not work (spoken or downstream), restore your system backed up using iTunes. Remember to update iOS to the latest version regularly.

Simple cleaning of hearing and polyphonic speakers from dust often helps. Before performing the procedure, remove the cover and film from the back and front panels, then use a soft bristle brush slightly moistened with alcohol or refined gasoline.

If you suspect a factory defect, immediately take your iPhone to an authorized service center or Apple dealer. they should change the internal parts of your model free of charge. Remember. when installing unlicensed software and careless handling, the warranty conditions are violated. Therefore, if you dropped or flooded your smartphone and damaged the speaker (hearing, voice), do not waste time traveling. It is much easier to call an experienced craftsman at home.

Speaker stopped working on iPhone

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

If your iPhone speaker does not work. it is completely broken or wheezes and rattles during a call. you don’t have to go to the service center right away. First you need to try to find the cause of the problem yourself and fix the malfunction at home.

What could be the reason for the breakdown

Sound problems with spoken (high) and low (polyphonic) speakers are fairly common. The main causes of malfunctions:

  • ingress of moisture due to the fall of the smartphone in the snow or flooding with liquid (tea, coffee, juice, water)
  • mechanical impact (shock, falling on a hard surface), causing damage to internal parts (loop, “ear sensor”, microphone, front camera, etc.)
  • dust and debris on the speaker or headphone jack
  • software malfunctions (especially if you install “left” programs on your phone)
  • volume is poorly adjusted
  • manufacturing defects

Problems can manifest themselves in different ways: it is hard to hear when the interlocutor speaks, the iPhone speaker rattles and wheezes, or stops working altogether.

Where to go for help

If you’re having problems with your microphone (bottom left) or speaker (top, spoken), save time and effort by finding a wizard on youdo.com. Yuda performers will find and fix the breakdown as soon as possible if you are faced with the following situations:

  • the speaker does not work well. it became worse to hear the interlocutor during a call after moisture or mechanical damage
  • rattling sound (when communicating through the voice speaker, when turning on the speakerphone)
  • the sound does not wheeze or tremble. it does not exist at all

Each YouDo performer has been working for many years, has extensive experience in diagnosing and repairing iPhones. Other benefits of performers:

  • leave within an hour to any area
  • provide services without days off and holidays
  • use only new and original spare parts (loops, ear sensors, upper and lower speakers, etc.)
  • repair any model, from 3 to 7

Private traders and companies registered on YouDo guarantee the quality of cleaning, soldering and installation of new components. If the speaker on the iPhone does not work (for example, it broke due to mechanical impact), order the service through Yuda. the master will change the spare part within one hour.

BICBON.COM 2021