How to unlock iPhone 11 screen
Why iPhone might be locked
Let’s reiterate that the iPhone can be considered locked for various reasons. The word “locked” itself can mean different states of the iPhone.
But I’m just sure that many users, finding themselves face to face with a problem device, are trying to find a solution on the Internet for the query “how to unlock an iPhone”.
It is a pity that at the very top of the search results of Google and Yandex there are currently sites that do not fully disclose this topic. I hope this article will fix everything.
So, I have identified three cases in which you may need to unlock your iPhone:
- Forgot numeric password to unlock iPhone
- Lock iPhone by mobile operator
- ICloud Activation Lock activated (requires Apple ID)
Decide which of the problems is closer to yours and move on to solving your problem.
Forgotten numeric password for iPhone
A numeric password (4 or 6 digits) is set on the iPhone to protect your data. If the password was forgotten or initially unknown, then access to information on the iPhone cannot be obtained.
Remember the recent FBI / Apple litigation during the San Bernardino massacre investigation? Then Apple refused to provide the FBI with the funds to unlock the terrorist’s iPhone. Well, if the FBI cannot get to the data hidden behind the password, then you are not destined.
From this it follows that data from a password-protected iPhone will no longer be able to fetch. Unless you made a backup beforehand.
Despite this, you can still unlock your iPhone. To do this, you will have to erase all data from the device (including the numeric password). Again, there are several options. How to do it in the instructions below.
There are at least three ways that will lead to a complete iPhone clean:
- The first is using iTunes (provided that this iPhone was previously synced to your computer).
- The second is through the Find iPhone service on the icloud.com website (provided that you have access to the account that is registered in this iPhone).
- The third is through the recovery mode (there are no conditions). This is the last method we will delete all information on the iPhone.
STEP 1. Connect iPhone with a cable to your computer and launch iTunes.
STEP 2. Hard restart your iPhone while holding down the HOME POWER buttons at the same time. Do not release the buttons until the iTunes logo with a cable image is displayed on the iPhone screen.
This will signal that recovery mode has been successfully activated on the iPhone.
If you have an iPhone X or older, read here how to put your phone into recovery mode.
STEP 3. A prompt to restore / update the device will appear on the computer screen. Select “Restore”.
STEP 4. iTunes will start downloading the latest iOS version for your iPhone. On average, an iOS distribution is about 1.5 GB.
If your internet connection is slow, the download process may take a long time. If the waiting time exceeds 15 minutes, iPhone will exit recovery mode and you will have to repeat steps 2 and 3.
After the restore process is complete, your iPhone will return to its “out of the box” state and you will need to set it up again. If you still have a backup, there shouldn’t be any problems at all.
It should also be remembered that after restoring the phone, you will be asked for the username and password from the Apple ID account to which this iPhone was linked. Read more about this in the third part below.
How to Unlock iPhone. Complete Guide
Most likely, you came to this page hoping to find an answer to the question of how to unlock your iPhone. And it’s good. that you came to us. Indeed, the Internet is full of articles that not only mislead people, but at the same time try to impose someone’s dubious services.
What exactly do you mean by unlocking? After all, the word “unlock” can be applied to the iPhone in different contexts.
This can be a forgotten numeric password or a lock for a specific communication provider, or a lock via iCloud (Find iPhone service, aka Locator).
The listed types of blocking have nothing to do with each other, therefore, in each case, the actions must be correspondingly different. Today I will tell you how to unlock your iPhone in all the above situations.
Lock iPhone by mobile operator
Now let’s consider the situation when the iPhone is locked under a certain mobile operator. Usually, such phones come to our market according to gray schemes from America or European countries.
In civilized countries, most of the population has long been using mobile services on a contract basis. Those. By paying a monthly amount, the client receives a certain tariff package. When concluding a contract, the client is usually offered a mobile phone of his choice.
It can be free or for a nominal fee a tube. over, such phones are provided locked for a specific operator.
Thus, conditionally cheap / free iPhones, locked under ATT or Verizon, appear in the hands of people, which then enter our market.
The problem is that such iPhones can only be unlocked by calling the support service of the mobile operator. No letters to the operator’s e-mail address will pass, so you don’t have to try. If you nevertheless decide to call the operator and request unlocking the iPhone, you will definitely be asked the personal account of the completed contract and whether you are the owner of this account.
If your answer to both questions is no, they will not be able to help you. The thing is that it is allowed to remove the lock from the iPhone only after the expiration of the contract (usually 2 years).
How to unlock iPhone in such a situation? On the Internet, you can find sites that provide an iPhone unlock service from various American cellular network operators.
I myself have never used such services, so I will not advise you anything. I just know that somehow they succeed. albeit not with all devices.
There is another (more popular) solution that will help you bypass the operator lock and allow you to use the iPhone with any SIM card. This solution is called TurboSIM, and is an adapter (a thin board the size of a nano SIM), which you have to shove into the SIM tray of the phone along with the SIM card itself.
TurboSIM is currently available from three major manufacturers: Jevey, R-SIM and Heicard. You will find detailed information on configuring TurboSIM on this site.
How to Unlock iPhone with iCloud Activation Lock Activated
Another common type of lock that could happen to your iPhone is iCloud Activation Lock. The most common reason that leads to this type of blocking is entering someone else’s Apple ID data in Settings. iCloud of your iPhone.
If you knew how many comments people leave under my articles with complaints that some unauthorized people (fraudsters) have tricked their phones by activating Lost Mode.
Well, what can you do, as my father says. “Everyone is a blacksmith of his own happiness.” You don’t have to trust every person you meet on the Internet.
On the other hand, iPhone could get locked after iOS firmware update / restore. This usually happens when the iPhone was not properly unlinked from the previous owner’s Apple ID.
There can be more than a few varieties of iCloud Activation Lock manifestations, so they cannot all fit in one article. There aren’t many ways to unlock your iPhone anyway.
Basically, all methods boil down to communicating with Apple support, but there are other steps that you yourself can do to unlock your iPhone.
Depending on your situation, read the articles at the link below:
In this article, I tried to fit three different reasons that can lead to iPhone lock. They are in no way connected with each other and actions in each case should be correspondingly different.
If you did not find the answer to your question, write in the comments what exactly brought you to this page. In one of the following articles I will tell you in more detail how to unlock an iPhone for use with any GSM operator and what nuances may arise when using Turbo SIM.
Resetting the counter of invalid attempts
Did you leave your iPhone on the coffee table and was grabbed by a curious child? Returning from the bathroom, they found that their favorite phone had turned into a piece of iron. But you know the password, you just need another chance! In this case, you can SIMply reset the counter of incorrect attempts and re-enter the desired combination, or use Face ID on your iPhone X, XS or XR.
You can reset the counter of incorrect password attempts on the phone on a computer with which the gadget has already been synced at least once.
- We connect the phone to the computer with a cable.
- In the “Devices” menu, select “Synchronize with.” Instead of dots. the name of the device.
- Once syncing starts, stop it by clicking the cross at the top of iTunes. The phone will return to the password entry window. Make no mistake this time.
By the way, you won’t be able to reset the password and the counter of attempts by “hard reset”: you must admit, it would be too easy for intruders.
It will also not work to connect the phone to someone else’s computer: in this case, you must first press the “trust” button on the phone. But you cannot do this as the screen is locked.
How to unlock iPhone if you forgot your password
Top 5 Ways to Unlock iPhone
. Why you need to urgently unlock your iPhone with really working methods?
We will not talk about cases when someone else’s phone fell into your hands. In this case, it is still better to return it to the owner. But still, atypical situations may arise:
Face ID has stopped working (scanner is broken, not responding). Yes, the situation is not the most common, but it happens.
The fingerprint scanner is broken, the settings are lost,
Thinking while twisting the phone in your hands, and spent ten attempts to scan your fingerprint,
You only used the password, but you cannot remember it and attempts to recover have been exhausted,
The phone fell into the hands of a child who entered incorrect information 10 times, and now the gadget is blocked,
The child set the password while playing and does not remember it.
You bought the gadget off hand and did not check if it is ready to work with you. In this case, it is worth not only recovering the password, but first make sure that your gadget is not listed as hijacked. This can be done by entering the serial number on the Apple website: the device must have a Clean status. Although, if this is not the case, we generally do not recommend that you pay money for such a dubious purchase.
You bought a device handheld and the previous owner did not unactivate the device in iCloud.
Recovery Mode to Unlock iPhone if Forgot Password
This method can be used only if you know the Apple ID of the device and the password to which the device is linked in the iCloud menu. If you dare to restore a locked iPhone without this information, and activation lock is installed on it using the “find my phone” function, the device will turn into a “brick”.
It is worth using the recovery mode if you want to reset the password on a locked iPhone 6, 7, 8, X, XS, XR. This may be needed if you don’t know, don’t remember the password, couldn’t find it.
- Turn off your phone.
- Connect it to your computer.
- Select Recovery Mode from the menu that appears.
- Turn on iTunes, click OK and then “Restore iPhone”.
- If a message appears about auto-checking for updates, click on the “check” button.
- Then click “Recover and Update” on the next screen. You will be warned that all data from the gadget will be deleted.
IMPORTANT: on some firmware versions, an error appears (3004): Failed to restore iPhone. To cope with this, close all browsers and make Internet Explorer your default browser by launching it and agreeing to the offer in the window that appears.
If you downloaded the firmware in advance (for example, because the Internet is slow on the computer), then the “restore iPhone” button in iTunes must be pressed while holding down the Shift key. Then a window will appear where you can enter the path to the firmware file.
Recover using a deleted iCloud service
This method is almost the same as the previous one. But you can be far from home and your home computer, in another city or another country. You can unlock iPhone via iCloud if you have enabled the “Find My Phone” option before.
- Go to iCloud.com from any device.
- Enter your Apple ID.
- Go to the “All devices” section and select the desired gadget.
- Select the line “erase iPhone” (Erase).
All data on the device will be erased, it will be unlocked. Then you can connect the gadget to iTunes at a convenient time and use the backup to restore.
This method only works if the locked phone is connected to WI-FI or mobile internet. And if you know your ID.
How to Unlock iPhone via iTunes
So, if you entered the wrong password more than 9 times or used the recognition scanner on the gadget, then the smart operating system will turn off the device, lock and deactivate it. In order to prevent fraudsters from accessing personal data (for example, wallet passwords, your personal photos and contacts), all content on the device will be deleted.
And it will end well if you have done an iPhone backup restore to iTunes regularly. In this case, in order to reset the phone, you will need an authorized computer.
- Connect iPhone to computer with cable, turn on iTunes.
- To force restart your phone on iPhone X, XS and XR, and iPhone 8 and 8 Plus, press and quickly release the volume up button, then volume down. Then keep pressing the side button until the recovery mode screen appears. (program icon). On iPhone 7 and 7 Plus, press the side and volume buttons at the same time. On iPhone 6s, press the Home button and the Top or Side key.
- Select “restore phone” in the window that appears.
- If you saved system backups during synchronization, after downloading the software, you will be prompted to use them to write to your phone. Agree.
- Set up the newly turned on phone and use it.
Installing new firmware via DFU mode on iPhone if you forgot your password
If soft recovery does not help, then it remains to use a hard reset to install the new firmware. This task can be solved in DFU mode. To get there on the iPhone 6 and 6s, SIMultaneously press the Home and Power buttons and hold for 10 seconds.
For iPhone 7 and 7 Plus, the procedure is different:
- Connect your phone to iTunes.
- Hold down the volume down and off buttons, hold until the phone turns off. Release only the Power button.
- In DFU mode, the screen should be black, no iTunes icon.
- On the computer screen, the program will offer to check for updates, after clicking the “Check” button, it will inform you that the phone is in recovery mode. Click OK and reinstall the firmware (it’s better to download it in advance).
Apple ID account data recovery
If the user remembers the Apple ID password, then unlocking the device is quite SIMple. For this:
- On the page iforgot.apple.com enter the e-mail specified during registration, which is at the same time an identifier in the Apple ID, click on “Continue”.
- A message will be sent to the mail with a link to change the password.
If you can’t access your mail, try to answer your security questions correctly. If you cannot use these methods, you will have to personally contact the support service to re-access your account.
Flashing iPhone to Reset Password
iPhone is well protected from hacking and theft of personal information, so almost the only way to unlock the device in the absence of a password is to flash it. This is also a standard procedure for recovering from a disaster when a Soft Reset does not help (normal restart).
The iPhone is flashed as follows:
- On a computer with iTunes, check for updates for the media player and, if necessary, install the latest version.
- Connect the Apple device to the computer using the original Apple USB cable.
- In iTunes, click on the phone icon, after which a window will open with which you will directly work.
- Further, the SIMplest option for a novice user. click the “Restore” button.
Immediately after this command, the application will start downloading the firmware for your device from the Apple servers, after which it will reinstall it on the iOS device. The next step is to restore personal data from previously saved backups using the same application.
Unlocking iPhone with iCloud
With iCloud access, unlocking your iPhone is easy. For this, however, the function “Find iPhone” on the smartphone must be active.
In addition, the device must be connected to the Internet. Unlocking is done as follows:
- From a computer or any device with Internet access, go to iCloud, where you need to open the Find iPhone utility.
- By clicking on the “Devices” button in the “All devices” section, make sure that yours is present in the drop-down list, opposite which a green circle is lit. This means that it is online, but the application was able to detect it.
Once completed, Setup Assistant will prompt you to restore your device either “as new” or from an iCloud or iTunes backup. In the first case, you will receive a device with factory settings, in the second, all user data at the time of creating the backup will be returned.
Self-installation of the firmware
You can independently download the firmware you need for your iPhone to your computer from one of the many specialized sites. Further actions will not differ much from what is described earlier:
- With iTunes open, click on the restore button while holding down Shift on the keyboard. If you work with a Mac computer, then you need to hold down Alt.
- An explorer will open, where you just need to indicate the program the location of the previously downloaded archive and click “Open”.
Further, the flashing will go to “automatic”, after which the device can be unlocked. To do this, during the initial boot, select the system language, region, connect to iTunes and set the “Like new” setting for the phone. After that, the user receives a smartphone with factory settings. You don’t have to create a password again.
Resetting the password in DFU mode
This method. the most reliable in terms of security. Using it to unlock, in most cases it is possible to avoid errors during flashing, since the device is forced by the user into DFU mode.
This is a bootloader mode, in which not only the installed system is rolled back to the factory state, but the memory is formatted, system components and iOS itself are reinstalled. But it should be borne in mind that in the absence of a backup of personal data, the latter will be irretrievably lost.
To unlock iPhone, enter the device connected with the Apple USB cable to the computer in DFU mode:
- hold the iPhone power button for three seconds,
- without releasing this button, press and hold the “Home” key,
- after 10 seconds release the last one, and hold “Power” until the device enters DFU mode.
In this case, iTunes will detect the device, but the display of the iPhone itself will not display the image of the USB cable and the player icon typical for the normal recovery mode (Recovery). The phone screen will be black, in some cases it may be white.
Further unlocking occurs according to the previously described scenario, indicating the location of the iOS firmware previously downloaded to the computer.
Disadvantages of this unlocking method
Despite its SIMplicity, this method has disadvantages, which often lead to failures and errors during flashing:
- The latest iOS versions are large, the latter weighing about 1.5 GB. This makes the download process quite lengthy.
- In case of a short interruption of access to Apple servers or an unstable home Internet, each time after the download is interrupted, the process will have to be restarted.
- If you are not using a Mac for recovery, but a regular Windows computer, the process is often accompanied by various failures and errors.
To avoid these troubles, it is better to download the firmware in advance yourself, and the SIMple method described above is more suitable for owners of Apple computers.
Also note that iTunes automatically downloads the latest iOS version for your device that it can work with. This is unacceptable for owners of “jailbroken” devices, for whom the password reset procedure will be somewhat different. Below we will talk about it, now let’s see how you can use your own firmware to unlock your iPhone.
How to unlock your iPhone (iPhone) screen if you don’t remember the passcode. 5 ways
Sometimes iPhone users have problems unlocking it. This can happen as a result of the device freezing or SIMply when it is impossible to remember the password. You can log in to the system again after flashing by connecting the device to a computer with iTunes. During this process, personal data is lost, which can then be restored from a backup, and errors can also occur. We will tell you further how to avoid them by performing the unlocking procedure correctly and safely.
How to unlock a device for owners of unlocked iPhones
To maintain the ability to connect iPhone to your cellular operator, unlocked smartphones can be unlocked using the SemiRestore application.
To do this, however, you need to install the OpenSSH component on your phone in advance, which is available for download from Cydia.
When unlocked, all user data will be reset, but the jailbreak will remain. For this:
- From office. site is downloaded and installed on the computer utility SemiRestore.
- The device is connected to the PC via a USB cable.
- After starting the SemiRestore program on the computer, it will take some time to detect the connected device.
- After successful recognition of the device, click on the “SemiRestore” button in the main window, after which the recovery process will be launched.
During the operation, the screen may turn off and on repeatedly, but upon completion the user will receive a “clean” device with factory settings. The only difference is that the SemiRestore component will remain in the phone. This will ensure that the jailbreak is still valid.
unlocking iPhone using recovery mode
This method can be used when Find iPhone is disabled on your iPhone. To complete this method, you need to sync your device with iTunes at least once.
To get started, you must update iTunes to the latest version.
Launch iTunes and connect your iPhone to the computer you previously synced with.
Put your device into DFU mode:
IPhone 8 or higher: Press and release the Volume Up and Volume Down buttons at the same time. Then press and hold the side button until the Connect to iTunes screen appears.
On iPhone 7 and iPhone 7 Plus: Press and hold the side and volume down buttons at the same time. Don’t let go until you see the recovery mode screen.
IPhone 6 or earlier: Press and hold the Home and Top (or Side) buttons at the same time until the Connect to iTunes screen appears.
You will be informed that your device is in recovery mode. And click “OK” to restore iPhone.
After a while, you unlocked your iPhone passcode, you can reset your iPhone or iPad. You can restore from iTunes backup if you have.
The device will be restored to factory settings. After restoring, you will be asked if you want to restore data from backup, now you can restore iPhone from iTunes backup.
Enjoy a safe and vibrant digital life
People also read:
- How to Unlock Broken iPhone Screen
- How to Unlock iPhone 6 / 6S Without Passcode
- How to unlock iPhone with unresponsive screen
- How to Remove Passcode from iPhone 7 / iPhone 7 Plus
Step by step to unlock a disabled iPhone with Siri
On your iPhone, press and hold the Home button to activate Siri. Tell Siri, “Hey Siri, what time is it? Then the Clock icon will appear, click on it to start the process.
Go to the “World Clock” interface and click on the sign. to add more hours.
You will be prompted to find a city. Enter whatever you want and click “Select All”.
This will bring up various options like cut, copy, define, share and more. Click on the Share button.
You will receive a new window that contains various exchange channels. Click on the “share hours via message” icon to continue.
In the “To” field, enter something, then press the “Return” button on your keyboard.
The provided text will be highlighted in green. Select it and click on the “”.
A new window will appear, then click “Create New Contact”.
After that press “Add photo” and select “Select photo”.
You can now access your photo library and view all photos in albums.
Exit the interface by pressing the Home button and you will be taken to the phone’s home screen. You can now access your iPhone without a password.
What happens if you enter the wrong password on iPhone too many times?
Your iPhone password protects your device from unauthorized access, and can also prevent you from using your device if you forget your password. This message usually appears after you have tried to enter the wrong password at least six times. When we see the message “iPhone is disabled”, first the instruction follows: try again after 1 minute or try again after 5, 15, 60 minutes.
6 attempts. your iPhone is disabled for 1 minute
7 attempts. your iPhone is disabled for 5 minutes
8 attempts. your iPhone is disabled for 15 minutes.
9 attempts. your iPhone is disabled for 60 minutes
10 attempts. you will receive the message “iPhone is disabled. Connect to iTunes “OR your iPhone will be completely deleted if Wipe Data is enabled in Settings” Touch ID & Password “(or” Settings “” Password “for iPhone without Touch ID).
Too many failed attempts and your iPhone is automatically locked for a short period of time. If you continue to enter the wrong password, the phone will either turn off until it is connected to iTunes, or it will automatically erase all your data if you have this option turned on. Many users want to know how to remove iPhone lock screen passcode without passcode? How to unlock a disabled iPhone without passcode? How to Unlock iPhone without Passcode. Don’t worry, this article will show you five effective ways to unlock iPhone without passcode.
The iPhone keeps users safe. A lot of valuable data is stored on your phone, including contacts, photos, social media accounts, passwords, and even e-wallets. Almost everything is hidden on the other side of the lock screen and it seems that you cannot get it if you don’t know the password. Everything seems to be safe, but there can be problems with the iPhone. Your iPhone 5S / 6 (Plus) / 6S (Plus) / SE / 7 (Plus) / 8 (Plus) / X / XS / XS Max / 11 can get locked for a variety of reasons. often than not, kids enter the wrong password and end up blocking your phone. Also, you may suddenly forget the new password you temporarily set. Or you just don’t remember the iPhone passcode you haven’t used for a long time. Usually, if someone enters the wrong password 5-10 times, the message “iPhone is disabled, connect to iTunes” appears on the screen. So how to access locked iPhone without passcode? If you forgot your password, here we will offer you some common solutions to unlock a disabled iPhone without a password.
By following the above steps, you will learn how to unlock iPhone without passcode. Because Find My iPhone will delete your phone data; you can take advantage of the Siri vulnerability. With Siri, you can unlock your device without losing data. But using Siri is too complicated and you have to repeat the steps every time you access your phone. If you want to find a SIMple, convenient and 100% doable method, UkeySoft Unlocker should be the most suitable choice. It is able to quickly save your iPhone from a disconnected state.
Unlocking iPhone without Password with iTunes
How to unlock a disabled iPhone if you forgot your password? Let’s learn what to do if your iPhone is disabled / locked, then follow the steps to unlock iPhone without password using iTunes. After restoring iPhone using iTunes, you can set up and access your iPhone, iPad or iPod touch.
If you have recently synced iPhone with iTunes, you can use iTunes to unlock iPhone without password. Actually, this method is to restore your iPhone using iTunes. Let’s learn how to put iPhone into recovery mode and restore it with iTunes.
Launch iTunes and Connect iPhone to Computer
Open iTunes on your PC or Mac, then connect your iPhone to your computer with a USB cable. If iTunes does not open new windows to require you to enter a password on your iPhone, this means this method can help you unlock it because the passcode was synced to iTunes before, then disconnect your iPhone from your computer.
Put iPhone into Recovery Mode for iTunes to Detect It
To use iTunes to recover a locked iPhone without entering a password, you need to put the iPhone into recovery mode for iTunes to detect the device.
The operation to put the device into recovery mode depends on the iPhone model. on how to put your iPhone or iPad into recovery mode.
Let’s take an example of putting the iPhone 6 / 6S into recovery mode:
1) turn off iPhone
2) Go to your computer and open iTunes.
3) While holding down the Power and Home buttons at the same time, connect the iPhone to the PC. While your iPhone is still connected to your computer, restart your iPhone. As soon as the Apple logo appears, release the power button, but hold the Home button until the iPhone displays a “Connect to iTunes” message. The device now reboots into recovery mode.
Restore or update your iPhone
iTunes has now detected the iPhone in recovery mode. On your computer, you will see a message in iTunes: “There is a problem with your iPhone that needs to be updated or restored.” You will be asked to choose if you want to repair or update your device. Please click “restore” And click OK, Then iTunes will restore iPhone.
IPhone password will be deleted after full recovery
Your password will be deleted and then all your data will be deleted at the same time. After completing this process, the password will be removed from your iPhone and you can now set up and access your iPhone without entering a password.
Cons of using iTunes: However, iTunes will erase your data, information, and settings along with your password. Besides. If you have not recently synced iPhone with iTunes, when you connect your disconnected iPhone to your computer, you may receive the following error message: “iTunes could not connect to iPhone because it is locked with a password. You must enter your iPhone password before it can be used with iTunes. ” In other words, iTunes can’t help you unlock your iPhone, don’t worry, keep reading part 2 and learn how to unlock any activated iPhone / iPad / iPod with a third party iPhone unlock tool.
5 Ways to Unlock iPhone Without Passcode
Justin Sabrina Updated on July 13, 2020
- Choose your language:
My naughty daughter changed her iPhone 8 Plus lock screen password and forgot it. I tried to enter the password several times and soon received the message “iPhone is disconnected, please connect to iTunes”. Now I am blocked. How to unlock iPhone without passcode?
How to Unlock iPhone 11 / X / XR / 8/7/6/5/4 If You Forgot iPhone Passcode? If you’ve forgotten your iPhone passcode and entered the wrong passcode too many times, you will see a message that says “iPhone is disabled, please try again in 1 minute.” After 1 minute you really do not remember the password for the locked screen and enter the wrong password again, the device is still locked and you will have to try again after 5 minutes.
People also ask:
unlock iPhone without password using Find My iPhone
Find My iPhone allows users to erase a locked iPhone and thus help you bypass iPhone passcode. It allows you to unlock iPhone passcode without a computer. If Find My iPhone is enabled on your iPhone, you can follow these steps to unlock iPhone without passcode.
Visit icloud.com in a browser window and sign in to your account.
When you’re done, you should select All Devices and choose your iPhone. If “Find My iPhone” is already on, it should be listed when checking.
Click on “Erase iPhone“, and then click on the “Erase” button to remove forgotten / lost passcode, but remember that all data on your iPhone will be erased at the same time.
Through iCloud. Find iPhone function to remotely erase iPhone so that it will delete the password and all data.