How to use iTunes for iPhone

Table of Contents

How to restore iPhone using iCloud

One of the common iPhone recovery methods is using iCloud storage. First of all, you should take care of good Internet traffic, since a significant amount of data will be transmitted. It is then recommended to create a preliminary copy for the current data. To do this, in the settings you need to go to the “iCloud” section “Storage and copies” and enable backup (if disabled) by touching “Create a copy”.

You can now proceed directly to reset your iPhone to factory settings. You need to reset your device to remove all settings and user files. To do this, in the smartphone settings, you need to go to the “General” section, the “Reset” item, the “Erase content and settings” mode. Click “Erase iPhone“.

Restart iPhone, on boot, set the setting to “Recover from iCloud Copy”.

Setting Up New iPhone on iTunes!

Confirm the choice, wait until the download is complete, the user settings of the phone and the saved data will be restored from the previously made copy.

How to Recover iPhone with iTools

This utility is the most famous analogue of iTunes. To work, you need to download the iTools program, install and run it. Connect iPhone to computer. If the gadget is identified in the program, go to the “Tools” section, click “Backup”, in the window that appears, check the boxes with the types of files that need to be saved, click “Next”, wait for the content to be defined. You can pre-specify the folder for storing the backup using the Change function. Click “Run”, wait for the result. Unlike iTunes and iCloud, this application does not encrypt files, which gives access to viewing and using photos without additional software. Unfortunately, it does not always identify the gadget.

ways to restore iPhone without iTunes

Apple has long been known as a quality manufacturer of high-tech iOS devices (iPhone, iPad and iPod). However, the more complex gadgets become, the higher the likelihood of accidental failures in their work. Therefore, it is extremely important for users to have backup copies of their data, which can be restored in case of a forced reset of the device to factory settings or when updating the software. Recovery mode will allow you to return your phone to normal operation. Apple generally recommends using the iTunes app to restore functionality to any of its gadgets. However, users often face a situation where iTunes cannot recognize the device or has been in recovery mode for too long. However, you can restore the iPhone in other ways, for example, via the Internet, connecting to iCloud, as well as using third-party applications. Let’s consider several options for solving this problem.

How to restore iPhone using CopyTrans Shelbee

If you have CopyTrans Shelbee on your computer, you can use it. Naturally, the procedure will be similar to the previous one. First, a preliminary copy (backup file) is created with all the current settings and personal information: contacts, messages, calendar entries, notes, photos and videos. iPhone connects to computer, CopyTrans Shelbee starts. Select “Backup”. Select the “Full backup” mode. By default, the backup will be saved in the folder with the backup files created by iTunes. To change the location of its storage, you need to click on the pencil icon and specify a new location. Click “Start” to start the procedure. After the end of copying, click “Done”. It will be possible to restore data from the created backup in the future.

If you need to restore, you must first reset the iPhone to factory settings in the same way as in the previous option with iCloud. Then connect your smartphone to your computer, call CopyTrans Shelbee, click “Restore” in the start window. To change the current folder with backup files, click on the pencil icon and specify a new path. Select the latest by date or the desired copy. Start the recovery process, when finished, click “Done”.

itunes, iphone

How to Recover Disabled iPhone with ReiBoot

The excellent Tenorshare ReiBoot program not only does the same job, but makes it much easier, literally with one click. In addition, it functions in difficult cases, for example, when the smartphone freezes during a running recovery mode, a cyclic reboot mode, in DFU mode, etc. over, it performs its function without loss or damage to data and supports all iPhone / iPad / iPod devices with iOS of any version, including iOS 12.

Download from the site and install Tenorshare ReiBoot on your computer. Launch the software to get started. The program has a menu for choosing the language of communication. Connect your iPhone (or iPad, iPod touch) to your computer using a cable (if you see a message on the iPhone click “Trust”).

The program itself prompts for further actions, identifies the gadget, opens a window with two main functions: “Enter recovery mode” or “Exit recovery mode”.

Everything the user needs. select the option you want, after which ReiBoot will do everything by itself in a short time.

If after that the device still does not work, click the “Fix Operating System” button and update to Tenorshare ReiBoot Pro to fix the iOS system.

For especially perfectionists, there is a user guide on the developer’s website, and on YouTube. several video instructions.

There are probably a dozen more similar ways to solve the problem. Still, one of the most successful solutions is ReiBoot. You can download the program for free on the official website of the developers. if desired, here you can find other useful programs for every taste, including the extended version of ReiBoot. Information on the site in Russian.

How to Activate iPhone with iTunes

Activation via iTunes, that is, using a computer with this program installed on it, is performed by the user if the device cannot be connected to a Wi-Fi network or use a cellular connection to access the Internet. Below we will take a closer look at the procedure for activating an apple device using the popular iTunes media combine.

How to activate iPhone via iTunes?

Insert the SIM card into your smartphone and then turn it on. If you have an iPod or iPad, start the device right away. If you have an iPhone, you won’t be able to activate the gadget without a SIM card, so be sure to take this into account.

Swipe to continue. You will need to set your language and country.

You will be prompted to connect to a Wi-Fi network or use a cellular network to activate the device. In this case, neither one nor that suits us, so we immediately launch iTunes on the computer and connect the device to the computer using a USB cable (it is very important that the cable is original).

When iTunes detects the device, in the upper left area of ​​the window, click on its miniature icon to go to the control menu.

Following on the screen, two scenarios can develop. If the device is linked to its Apple ID account, then to activate it, you will need to enter the email address and password from the identifier linked to the smartphone. If you are setting up a new iPhone, then this message cannot be, which means, immediately proceed to the next step.

iTunes will ask what needs to be done with the iPhone: set it up as new or restore from a backup. If you already have a suitable backup on your computer or iCloud, select it and click the “Continue” button for iTunes to proceed to activating the device and restoring information.

The iTunes screen will reflect the progress of the activation and restore process. Wait until the end of this procedure and do not under any circumstances Disconnect the device from the computer.

As soon as the activation and restoration from the backup is completed, the iPhone will go into a reboot, and after the restart, the device will be ready for the final configuration, which includes setting up geolocation, enabling Touch ID, setting a digital password, and so on.

In general, at this stage, the activation of the iPhone through iTunes can be considered complete, which means you can safely disconnect your device from the computer and start using.

Brute force attack

A brute force attack is a kind of attack that will try every possible password combination. Choose this attack when you have no idea what the password might be and there is no configuration for this attack. However, this attack can take a long time to find the password.

READ  How to take screenshot on iPhone 11

Select the one you want to restore,

Then, all iTunes backups on that computer will be listed. Select the one you want to restore and click the “Next Step” button.

Tenorshare 4uKey. iTunes Backup offers 3 types of attacks, namely brute force attack, mask attack and dictionary attack. Choose the most suitable password to efficiently extract the iTunes backup file.

Remove iTunes backup password

4uKey. iTunes Backup can also strongly remove password for your encrypted iPhone, iPad, iPod touch backup file.

Mask attack

If you remember something about the password, such as the length of the password, the character set, etc. You can choose a mask attack. The parameters for this attack include password length, character range, and customization affix. Set these items can help you find your lost password faster.

How to use 4uKey. iTunes Backup (iPhone Backup Unlocker)

Tenorshare 4uKey. iTunes Backup is an excellent password recovery tool that helps iOS device users find lost or forgotten iTunes backup password and restore access to iTunes backup. It offers 3 types of attacks to choose from, which improves the decryption efficiency.

Dictionary attack

If your iTunes backup password is one of the commonly used password and you’re not sure what it is, choose a dictionary attack. You can install a text file with all possible passwords and import this text file into the program. Along with this text file, there will be a default dictionary, both of which are for running the program.

Recovery time depends on password length, complexity and attack settings. Typically, a password of up to 4 digits can be found very quickly. The longer your password is, the longer it takes. Once found, you will see a popup displaying your iTunes backup password.

Find iTunes Backup Password

4uKey. iTunes Backup can help you find lost password to unlock iPhone, iPad, iPod touch backups instantly.

Which to choose. iTunes or iCloud?

You may prefer to use iTunes backup instead of iCloud backup. If you do this, keep in mind that it may take much longer. Also make sure you check the box in iTunes to encrypt the backup.

If you have a fast internet connection, it is better to do the recovery using iCloud. it is much faster. Otherwise, iTunes recovery might be the way to go. Don’t forget, if your Mac is running macOS Catalina, you’ll have to use Finder instead of iTunes for backups and restores.

These are the three main ways to set up your new iPhone. Of course, advanced users probably already know all the subtleties, but sometimes experienced owners need to spy on certain points, not to mention newbies (if you have any questions, you can find the answers in our Telegram chat). The latter will be much more after these holidays.

How to set up your new iPhone 11, iPhone 11 Pro, or iPhone 11 Pro Max

Many people prefer to update their smartphone on New Year’s holidays (or give iPhones to loved ones). But it’s one thing if the transition occurs from the iPhone XS to the iPhone 11 Pro, and completely different if the owner of the new smartphone previously had, for example, an iPhone SE or iPhone 6. In recent years, the process of setting up an iPhone has changed as much as ourselves. iPhone. Apple just makes the process easier. And setting up your new iPhone 11 from scratch is just as easy as it used to be. gone are the days of manually copying passwords just to get to your home screen.

Many people find it difficult to set up an iPhone. But everything is very simple

However, there are a few more tricks to get you started using your phone quickly. Let’s see how to properly set up your new iPhone.

Restoring iPhone from Backup

This is the easiest way to switch from your old iPhone to a new one. All you have to do is make sure you have a recent backup from your existing iPhone (or even iPad) and then point your new iPhone 11 to that iCloud backup. Then it will download all your settings, apps, passwords, even your wallpapers. When the process is complete. it may take a while, depending on your internet speed and the size of your backup. it will be like you’ve never sold an old iPhone. Even your Safari tabs will stay in place.

The backup time depends on the amount of information on the iPhone

itunes, iphone

To do this, first go to the iCloud settings on your iPhone and make sure there is a recent automatic backup. If not, just make a new copy manually.

How to use iTunes with your iPhone

Automatic iPhone setup

This fantastic feature was introduced in iOS 11. Just bring your old and new devices close together when prompted, and auto setup will copy your Apple ID and all settings. It’s kind of like AirDrop, with only one specific purpose.

This window appears automatically as soon as you bring up your new iPhone.

When you start your new iPhone for the first time, any nearby iOS devices will detect it and prompt for automatic setup. The new device will display a cloud-like dot pattern on the screen. Just use your old device’s camera to “scan” this pattern as a QR code. Your iCloud login, Wi-Fi passwords, and whatever else you need are transferred automatically. This is really amazing.

To use the migration, you must have an iPhone with iOS 12.4 or later

If you can’t use your current iPhone’s camera, tap Manual Authentication and follow the onscreen instructions. Both iPhones must be nearby and connected to a power source until the data migration process is complete.

Transfer Data from Android to iPhone

For this there is the Move to iOS application. It can only be installed by users of devices running Android. Move to iOS app lets you quickly transfer contacts, photos, and other data from your Android device to your iOS device. In other words, it is intended for those who decide to switch to iPhone.

It is enough to download this application and follow the instructions

Longreads for you

If Apple has blocked your Apple ID account, this does not mean that you have broken the rules, although they usually get blocked for this. We analyze the main reasons for blocking and ways to regain access to your account

If you are running out of ports on your MacBook, such as a memory card slot, an external USB hub might be the solution. But you need to choose it wisely, otherwise you can lose it. We share our experience of using such a device and a selection of cool hubs for MacBook.

Believe it or not, the rose gold iPhone was once one of the most popular. Apple seemed to have forgotten about this color, but returned it to the iPad Air 4. And it looks like it will also appear in the iPhone 13 (or iPhone 12s) this year.

bono_denis, No, it won’t. A week ago, I quietly switched from iPhone 3gs (iOS 6.1.6) to iPhone 5s (iOS 12.4.4)

1 Charge your smartphone faster

Turning on airplane mode allows you to turn off the reception of calls and messages. The internet won’t work either. The option is needed during air travel, at conferences, and in other situations when the phone must be turned off.

Increase battery life. disable or remove programs that you do not use, turn off the Internet, geolocation.

secrets for beginners

Since it is not difficult to use the iPhone 6s and gradually improve your skills, there are some nuances that should be discussed. Even not all experienced users know about them.

  • If you cannot reach a phone number, it is not necessary to dial it every time, especially if it is not in the phone book. You just need to press the call button and the iPhone will prompt you to dial the last number.
  • Apple developers have made sure that the phone can be used by people with poor eyesight. But the display scaling function can be useful not only for them, but also for other users: designers, photographers. To enable it, you need:
  • Go to “Settings”.
  • Go to “Basic”.
  • Next “Universal Access”.
  • Enable “Magnification”.
  • You can enable Caps lock while typing by double-clicking the shift key. Then the button will turn blue.
  • To find out your phone number, you need to go to “Contacts” and drag the screen down with your finger. The phone number will appear at the top.
  • If you need to quickly remove the typed text from the field, then shake the gadget vigorously enough, the characters will be deleted.
  • To charge your iPhone faster, you can connect a more powerful charger. It is important that this is Apple’s memory.
  • To take a picture without using the touchscreen, you can use Siri by holding down the Home button for a long time and then asking to turn on the camera by voice. Now, to take a photo, you should press any volume button on the gadget or headset, if used.
  • iOS supports Screen Aloud feature. To use it, you need to move the slider in the speech settings: “Settings” = “General” = “Accessibility”. For the text on the screen to be read through the speaker, you need to swipe down with two fingers.
  • Siri can speak not only in a female, but also in a male voice. You can change the setting in the “Sound settings” tab.
  • You can delete old messages after a certain period of time. In the “Leave messages” tab, you should set the time after which old records will be deleted.
  • Prioritize application downloads using 3D Touch technology. On the desired application, apply a firm 3D Touch press and select “Boot Priority” from the list of options.

Do I need an iPhone case

Some beginners don’t wear protective covers. However, if dropped, even on a not very hard surface, the glass of the iPhone can break. A special protective film and a hard or soft case will help protect the screen from damage.

How to activate and set up a new iPhone

Then you need to connect your iPhone to your computer using the supplied USB cable, or join your home Wi-Fi network. After that, the gadget will automatically send data to the Apple server and offer the owner to configure the operating system.

READ  How to quickly charge your iPhone

basic settings

A personal Apple ID account will allow the owner to use a smartphone, download applications, use the Apple mail service, use iCloud, etc. First, select the item in the phone menu “Set up as a new iPhone”.

A new menu will appear, when you activate a new gadget, you need to click the item: “Create Apple ID for free”.

Fill in the column “Email address”.

The free iCloud e-mail service is also available for registration. After completing all the actions, the smartphone can be used.

How to use iPhone 6, 6S for beginners

Apple has developed and maintains its own operating system other than Android. Since it can be difficult for newbies to use the iPhone 6, we decided to prepare this white paper.

4 Setting up the camera and learning how to use it

Taking pictures in iOS is easy. But there are a few nuances.

Enable Grid. The gridded display helps orient the lens during the shot. To activate you should:

  • Go to “Settings”.
  • Go to “Photo and Camera”.
  • Select the “Grid” mode by moving the slider to the right.

Focus and Exposure Settings. By default this happens in automatic mode, but manual can be used. Press your finger on the focal point (the central object of the future picture). A yellow square will appear.

To change the exposure, press again with your finger anywhere (outside the mark) and swipe up or down until the desired result is achieved.

How to start and use on the app Store

The service allows you to buy and download useful content: programs, music, videos. To connect, find the App Store icon and click on it, then follow the sequence of actions:

  • Click on the icon.
  • Enter e-mail, indicate country.
  • The program will ask you to accept the terms of use of the service.
  • Enter name and date of birth.
  • Indicate the bank card number. If you do not enter, then with each purchase you will have to enter the details.
  • Then confirm the phone number and click “Next”.
  • An email will be sent to you, you need to activate your account by following the instructions.

The first acquaintance with the gadget is over. iPhone 6. how to use, learning basic settings and functions are known. But you can demonstrate a number of subtleties.

Tunes Store app: how to use it on a personal computer?

It is incredibly difficult to briefly talk about what iTunes is, because it is not an ordinary media player, but a real multimedia complex. This program is designed specifically for owners of branded phones, tablets, Apple players. It is also useful for owners of set-top boxes called Apple TV. For the first time, a person thinks about how to use iTunes, immediately after purchasing one of the above devices. You will need the program (in the case of an iPhone) to start a new phone for the first time, authorize it and complete the setup.

Let’s find this treasure

Before you can figure out how to use iTunes, you need to find it. In search of an application, an unknowing user tries to download it on torrents or some sites of incomprehensible content. Sometimes it is even suggested to send an SMS to get an iTunes activation code. This is a fraud. To download a full-fledged Russian-language version of iTunes, you need to go to the official Apple website. The program can be installed on laptops and computers running Mac OS and Windows operating systems. 64 and 32-bit versions developed for Windows.

How to use iTunes and what it is?

If you want to understand how to use iTunes and for what purposes you need it, this material will help you. We will talk about the “apple” program for laptops and desktops. In the Russian version, the name of the program sounds like “iTunes”. The possibilities of this solution are very wide, and it is necessary for all users of iPod, iPad and iPhone.

How do I use iTunes? Synchronization process

The main purpose of the program. filling the iPhone (or other Apple device) with content, in other words, recording programs, games, books, pictures, movies and music into it using a computer. To download everything you need, sync is used. It should be noted separately that to work with video materials, you need to install the QuickTime Player application. It is impossible to transfer a file from a computer to an Apple device directly (without iTunes). Many users do not like this idea with a “middleman”, however Apple has not yet come up with a better way to deal with pirates.

Perhaps the need for the familiar iTunes will disappear when the manufacturer implements a deeper integration of its resources into the Internet. Progress in this direction is already visible. Confirmation of this. iCloude service. However, the software solution to which this material is devoted will not lose its relevance for a long time. Whenever a new version of software becomes available, Apple recommends updating and always using the latest software version. You can get the update in two ways: just download the new version of the software on the official website and install over the previous one, or use the built-in updater. Some Apple device owners, looking for an alternative, instead of iTunes use other programs with which you can try to download files to branded devices. However, such actions are extremely unreasonable and not always justified, because the official software is distributed absolutely free of charge. Now you know the basic principles of the program and can figure out in practice how to use iTunes.

How to use iTunes?

Almost all Apple device owners are aware of iTunes and its capabilities. Thanks to the so-called “tuna”, you can download videos, photos, music, books and other files to i-devices from the Cupertino company. Without aytyuns, downloading these files is impossible, and direct file transfer will not bring a positive result. If you have an iPhone, iPod or iPad, then most likely you will have a question about how to use iTunes?

ITunes is a huge multimedia processor. In addition to a file downloader for Apple devices, iTunes can be used as a media player, and you can also buy music and movies through the program on the iTunes service. In addition to all this, with the help of “tuna” you can update the firmware of your smartphone, player or tablet at the touch of a button.

iTunes to iPhone Transfer | How to use iTunes | Tutorial

So, the first thing you need to do is download iTunes to your computer. Please note that iOS devices already have iTunes preinstalled, but this is not suitable for PCs. Open the Apple website in your browser and click the Download iTunes button. Enter your e-mail if you are interested in the latest company news.

Click the “Download” button and save the installer to your computer. As of October 2014, iTunes 11.4 is available with a volume of 107 MB. With the release of new devices, the version of “tuna” is updated. However, you can always update to the new version from the installed iTunes.

After installing the program, connect your Apple device to your computer. The device should be identified as a flash drive. Open “My Computer” and make sure the device is connected.

Alas, Apple devices do not support “simple” file transfer. All music transferred to a player or smartphone is synchronized and converted in a special way. For example, this is how music files look on an iPod:

So how do you use iTunes? The iTunes media player is a rather gluttonous program in terms of resources, so if you have a weak computer, close other utilities when opening the program. The connected device appears in the main iTunes window under the Overview tab. When you connect your Apple device for the first time, you will need to set the device name.

In the options, be sure to check the boxes next to “Sync only checked songs”, “Open iTunes when connected” device name “. If the “tuna” finds a new firmware for your device, he will offer you to update it. It is enough to click the “Update” button, wait for the firmware to download and install it on the device.

In addition, using iTunes, you can set the volume threshold on the player. Check the box “Limit maximum volume” and set the slider to the desired position.

Most Apple gadget owners use iTunes to download music to their devices. Here’s an example of downloading music to iPod.

After connecting your iPod, go to the “On this iPod” tab and click the “Add” button.

In the new window, click on the “File” link and create a new playlist: “New Playlist”.

Enter the name of the playlist and click on the “Finish” button.

The playlist you created will be displayed on the left side of the program. It’s empty for now, but it’s time to add some music.

Open the music folder on your computer that you want to download to your iPod, and drag it into the program window.

The added music will appear in iTunes. If you uncheck the box next to a song, it will not be saved to the player. Click on the iPod icon to go to sync.

Under Music, select your playlist, check the box next to Sync Music, and highlight Favorite Playlists. After these steps, click the “Synchronize” button at the bottom of the screen. The process of copying (syncing) songs to the iPod begins.

Do not disconnect your iPod until “Synchronization complete” appears at the top. Click “Finish” and eject your iPod in a “safe” way.

Other files are added in the same way, only the creation of a playlist is not required. It is enough to select the items “File Add file to the library”, and then start the synchronization process.

Every Apple device owner can learn how to use iTunes correctly. Undoubtedly, at the beginning of using the program it will be a little unusual, but this is a kind of payment for the huge functionality of iTunes. Be sure to watch the following iTunes video:

If you plan to connect to an iPhone or iPad via Wi-Fi, set the checkbox “Synchronize with this iPhone / iPad via Wi-Fi” in the settings. After that, you will need to launch a wireless connection through the device settings.

READ  How to view browser history on iPhone

Want to save space on your smartphone or tablet? In this case, we advise you to check the box “Reduce bitrate for high quality songs to kbps AAC”.

Instead of dots, there is a drop-down list in which the desired bitrate is selected (the optimal indicator is at least 128 kbps). How to use iTunes to download music?

It’s simple. go to the music tab and add music tracks here via the “File. Add to Library” menu.

You can also use direct dragging and dropping of tracks from a folder to the library, which is somewhat easier. After that, you can start prescribing ID3 tags (if they are absent) or start synchronization. in the latter case, you need to check the “Synchronize music” box and mark the downloaded tracks.

Please note that syncing works in such a way that the content on your device will match the current content in your library. If necessary, you can upload music sorted by albums, genres, playlists and artists by checking the corresponding checkboxes.

How to use iTunes on a computer

We upload videos and films

How to use iTunes on a computer to upload movies and videos? This is done as easy as shelling pears. First, you need to carry out the initial iTunes settings as indicated in the previous section, where we learned to upload music tracks.

Next, go to the “Movies” tab and add the video files here. If they do not want to be added or played, you need to install the Quick Time player.

Music upload

You can download music to your iPhone from a wide variety of sources. it can be tracks from the iTunes Store or music files from your hard drive.

In order to start downloading, you need to connect your device to your computer and wait until iTunes sees the connected gadget. We carry out the initial setup of the program.

To do this, go to the “Overview” tab and check the boxes “Synchronize only selected songs and videos” and “Process music and videos manually”.

How to use iTunes. step by step instructions

With the following instructions, you will learn how to download various content to smartphones and tablets from Apple, create backups and update software. Let’s start with music files.


Owners of Android devices do not use any programs to download music, videos and other content to their smartphones and tablets. As for the owners of Apple devices, they are forced to use the iTunes multimedia combine.

This program is designed to work with content and to perform other functions. How to use iTunes?

Install iTunes

In order to start working with content, registering an Apple ID, or working with backups of your iPhone or iPad, you need to download the latest version of iTunes.

The main source for downloading this application is the official Apple website. We go to the site, go to the section with iTunes, click on the download button.

A form will open in front of us, offering to subscribe to newsletters. If mailings are not needed, uncheck the boxes and click on the “Download” button below.

Next, we wait for the download to complete and proceed with the installation of the program. The installation file will install the specified program on the computer, and will also take care of installing the drivers and starting the necessary services.

After that, you can start connecting your smartphone / tablet to upload content and perform other actions.

How to download the app via iTunes

First of all, let’s look at how the applications of interest are loaded into iTunes. To do this, start the iTunes program, open the “Applications” section in the upper left area of ​​the window, and then go to the “App Store” tab.

Apps downloaded from iTunes will appear in the My Programs tab. Now you can go directly to the process of copying the application to the device.

How to install an application on an iPhone via iTunes

ITunes is a popular computer program that allows you to organize work on your computer with all the available arsenal of Apple devices. One of the features of the program is downloading applications and then installing it on the device. This process will be considered by us in more detail.

Important: In the current versions of iTunes, there is no section for installing applications on iPhone and iPad. The last release in which this feature was available was 12.6.3. You can download this version of the program at the link below.

How to Transfer App from iTunes to iPhone, iPad or iPod Touch?

Connect your gadget to iTunes using a USB cable or Wi-Fi sync. When the device is detected in the program, in the upper left area of ​​the window, click on the miniature icon of the device to go to the device control menu.

In the left pane of the window, go to the “Programs” tab. The selected section will be displayed on the screen, which can be visually divided into two parts: the list of all applications will be visible on the left, and the desktops of your device will be displayed on the right.

In the list of all applications, find the program that you need to copy to your gadget. Opposite it is the “Install” button, which must be selected.

After a moment, the application will be displayed on one of the desktops of your device. If necessary, you can immediately move it to the desired folder or any desktop.

It remains to start syncing in iTunes. To do this, click on the “Apply” button in the lower right corner, and then, if necessary, in the same area, click on the “Synchronize” button that appears.

Once the sync is complete, the app will be on your Apple gadget.

If you still have questions related to how to install applications via iTunes on iPhone, ask your questions in the Комментарии и мнения владельцев.

What is iTunes for Computer

It is very difficult to say in one word what iTunes is, because it is not just a media player, it is a whole multimedia complex. This program is intended for all owners of iPhones, iPads, iPods and Apple TVs.

The need to install iTunes on your computer appears from the moment you purchase one of the devices listed above. As soon as you purchased, for example, an Apple iPhone, you will immediately start looking for this very iTunes, you will need it in order to launch your new phone for the first time, authorize it and perform the first setup. For an example of the initial activation procedure, see the article. First launch and setup of Apple iPod touch.

How to update iTunes

With a new version of iTunes available, Apple recommends that you update the software and always use the latest version. We tried to update iTunes in two ways, in the first method we just downloaded the new version of the program from the official website and installed it on top of the old one, you can update via the built-in updater, read more in the instructions for updating iTunes.

I hope after reading everything written above, it will become a little clearer for you what iTunes is and what it is for.

ITunes versions for computers

The first version of iTunes was developed by Apple in 2001 and is being updated to this day, at the time of this writing, version 11.0.5 is available.

ITunes can be installed on computers and laptops with Windows or Mac OS installed. There are no problems with Mac OS, but for Windows there are 64 and 32-bit versions, read more about the bit depth. Choosing iTunes. 32 or 64 bit.

The subsection says “for computers”, but there is also iTunes for iOS, it is a standard application and is supplied in the operating system of any iPhone, iPad or iPod touch, it is not installed separately in iOS, but is updated itself, along with the iOS firmware update.

What is iTunes for. Synchronization process

After iTunes is installed, let’s figure out what it is for, we have already figured out the activation and the first setting above. The main purpose of the iTunes program is filling the iPhone (or other Apple gadget) with content, that is, recording music, films, pictures, books, games and programs into it using a computer.

To download everything you need, the synchronization procedure is used. As an example, here are some instructions for syncing iPhone:

iTunes and instructions will guide you through all of the above steps, although no, not all, you need to install QuickTime Player to fully work with video.

The fact is that simply taking a file and uploading it directly from a computer, for example, to an iPhone or iPad, just won’t work, for this you need the iTunes program. Everything is done through this Tuna. Many users, of course, do not like this idea with the “intermediary Aytyuns”, but apparently Apple has not yet come up with another way to combat piracy.

ITunes on its own for computers will probably die out over time as deeper integration into the Web takes place. We already see some steps today. the iCloude web service is an example of this. But while iTunes is still up to date.

Where to download iTunes for free

In search of free Tuna, an unknowing user often tries to download iTunes from torrents or from some sites of incomprehensible content. Some are even offered to send an SMS to receive an iTunes activation code. all this is complete nonsense.

To download a normal iTunes in Russian, you need to visit the official Apple website. We described detailed instructions on how to download and install iTunes on your computer or laptop earlier:

Before installing, check out what versions of Tuna are.