How to use the Internet on a Samsung TV

Diagrams for connecting a TV by cable

We will show and tell you how to connect a TV to a router or just to a cable from an Internet provider.

What you need to connect your TV to the Internet via cable

To establish a wired connection, you need:

  • the provider’s cable, which comes from the entrance or from the modem in your apartment, or the LAN cable (if we connect through a router);
  • TV with Smart TV and LAN connector;
  • router (if direct connection does not suit you);
  • availability of Internet access (paid tariff);
  • type of network. ask your provider what protocol it works with: call technical support or look at your contract with the company. Protocol Options: PPPoE, L2TP, PPTP, Dynamic IP, Static IP.

Internet on TV: how to connect using a cable

internet, samsung

How to find the MAC address of the TV

Direct connection may not work for you if your ISP uses MAC address binding. The provider has a MAC device (its physical number) to which the Internet was previously connected (your router, PC). Now you have decided to change the device, so the provider needs to inform the new MAC of your TV, so that the company now supplies the Internet to this device too.

How do I find the MAC address of my TV? This unique code is, of course, in the TV documentation. Or you can see the address on the screen of the device itself. If you have Samsung, go to the “Support” section, under “Product Information” there will be “Model Code”. This is the MAC of your TV.

You can find out the model code through the “Support” block

Setting up TV with a wired connection directly or through a router

After the physical connection, you need to configure the TV to receive an Internet signal.

Through a router

If you decide that you need an intermediary in the form of a router, do the following:

Using a special cord, you need to connect the router to the TV

How to set static IP and DNS on TV

If you connect the Internet directly and use the “Static IP” protocol, after the basic TV setup (which was described in the previous section), you need to register the data from the contract in the TV settings: IP address, DNS addresses. Where to write them:

  • After the basic setup of the wired connection, go to the “Connection Status” section.
  • Next, click on the IP Settings / Settings.

How to enter the service menu of a Samsung TV

Any TV, including those that are not smart TV devices, have a service menu that controls vital settings. In particular, the size of the image horizontally and vertically, brightness correction, and other parameters that can seriously affect the operation of the device. Therefore, if you do not understand how and what to do, it is better to leave this service altogether.

It is not surprising that the service menu on Samsung TV is usually called extended, because it is used if you need to make serious changes in the operation of the TV itself. And to use it, you need to have a special remote control. over, it is important that it is “native” for the TV, that is, it comes with it. Otherwise, even if you get into the menu, it will be difficult to be there, since the control is not reliable.

Service mode Samsung TV UN55TU8000, as on

How to enter the service menu on Samsung UN55TU8000 TV?

READ  How to remove a foot from a Samsung TV

If you want to enter the service menu on your Samsung UN55TU8000 TV, you can try one of the methods listed below.

Second method:

  • First turn off the TV by pressing the power button on the remote.
  • Then press the buttons on the remote in the following order: Mute, 1, 8, 2 and Power.
  • Now the TV turns on, and the service menu should appear on the screen.
  • Use the ARROW button to navigate the menu and the OK button to confirm your selection.

How to set up Samsung Smart TV.

So, connect the cable between the router and the TV via the Ethernet port and go to the Smart TV menu in the “Network” section and open the “Network Settings” item.

After entering the network setup, you will see a message that the network cable is connected. Click the “Start” button to configure the wired network settings.

After successful network connection and network connection, click “OK” button. Now access to the Internet on the Samsung Smart TV is open for you. But if the connection and connection is not established, then do not rush to contact your Internet provider, but click on the “IP Settings”.

How to Access the Internet on a Samsung TV

Second method:

  • Turn off the TV by pressing the power button on the remote.
  • Then press the buttons on the remote in the following order: Mute, 1, 8, 2 and Power.
  • Now the TV turns on, and the service menu should appear on the screen.
  • Use the ARROW button to navigate the menu and the OK button to confirm your selection.


You can purchase access to viewing TV channels from Pirs TV by following several points:

  • Download and install the player on the device.
  • If the TV is 2010-2014, then installation is possible as in paragraph 2 of the previous appendix.
  • Launch the player, enter the link address in the settings where the playlist is located.
  • Finishes the installation process, and proceed to view all available channels.


To customize this widget, you need:


To use the OTT player, you must first perform the following steps:

  • Download this player to your device.
  • The application requires authorization, so we register on the official website.
  • We confirm the action by e-mail and the letter that came to it.
  • We go to the account on the site to complete authorization and edit personal data as needed.
  • Download your favorite playlists and add them to the playlist.
  • We enter the information used for authorization into the application downloaded to the device and watch the desired telepictures.

Setting up IPTV on Samsung Smart TV

Important! Before configuring programs for viewing, you need to make sure that the Internet connection is successful.

When the Internet is connected, you can start searching for widgets.

Let’s consider several well-known applications for viewing IPTV and how to install playlists in them.

Samsung Smart TV: How to Connect to Internet WiFi (Wireless or Wired)

Connecting to the network using WPS

There is a faster option for connecting to the network, but to complete it, you will need to support the router for wps technology. For this:

  • In the network settings, select the connection method. WPS (PBC).
  • On the side panel of the router, hold down the WPS button for a couple of minutes. The TV device will establish a connection with the network.
  • The display should show an inscription indicating the completion of the connection process.

LAN connection

Using a cable Internet connection, the user automatically provides himself with a reliable connection and high-speed data flow. With a LAN cable, you can connect to the network in three different ways:

  • By connecting the Ethernet port on the TV to the same type of connector on the portable modem.
  • Using a router. The cable from the router should be connected to the network port on the TV set, given that the router is already connected to the existing modem and configured correctly.
  • Direct connection. A network cable connects the Ethernet port and the port on the TV.

Wi-Fi wireless connection

Samsung Smart TVs can also be connected to the network via Wi-Fi. To do this, you need to use wireless routers (routers) and have an independent Wi-Fi adapter in your TV. If the TV model does not provide such an adapter, you can additionally purchase an external one and use it.

Setting up via the TV menu. Select the “Network” section and go to the section of its settings. Choose a wireless connection method and your network. Next, enter the password for Wi-Fi, and then complete the installation.

How to set up IPTV on Samsung Smart TV

Smart TV today is integrated into almost all new TV models. This function allows you not only to watch channels without restrictions, but also to manage air streams, chat and play various 3d games. But in order for all these opportunities to be available, you first need to perform a number of activities. This article will cover how to set up IPTV on a Samsung TV device and what you need to enjoy TV viewing.

READ  How to distribute the Internet from a Samsung to a laptop

Features of Internet connection on LG TV

Smart TV is a popular technology found on most modern TVs. With the help of this feature, it is possible to use all the possible services of the Network. But first. they need to be connected.

The entire Internet has special ciphers that protect it from hackers.

How to connect a TV to the Internet via wires

Stay up to date with internet connectivity on TV. If, in addition to the TV, there is no Smart-enabled technology in the house, you can connect to the Internet directly. However, this is not always the case, so you often have to branch out the cables. It is for this purpose that you have to create a wired connection through a router.

  • We take a LAN conductor with crimped ends, insert one of them into the corresponding plug of the router (usually there are up to 6 of them), and the second to the Internet input on the TV.
  • Next, we go into the settings and select the configuration method (manual or automatic). If necessary, we register the necessary data from the contract.
  • Check the functionality of the connected wire. To do this, take a look at the front panel of the router: if the indicator light is on, the connection is correct.

As a result, you can check the functionality of the installed Internet applications on the TV.

Ways to connect the Internet using a working router

Wireless routers are found in every home where there are many appliances with wireless connectivity. However, the connection via a router is not always done via Wi-Fi. Therefore, we will consider two methods: wireless and wired.

How to set up Smart-TV on LG TV

Banner ads on TV pop up less often than on PCs. You can set up the Internet for this TV using any of the above methods. However, this is not enough: in order to fully use the global capabilities, you also need to register your device model on the manufacturer’s website. Go to your profile, for this click the “Login” button, where enter the required data in the fields, then accept the agreement and stay online. To get to the user menu, you must press alternately two buttons on the remote control: Exit and Home.

We connect the Internet directly to the TV using a network cable

You can also download game apps and social networking software to your TV. Cable TV connection to the Internet is considered one of the most reliable, since the signal carries only minimal losses from the point of entry to the receiver itself. Consider how to produce it.

  • When the house already has a router or modem, you need to get an additional crimped cable of the required length.
  • Then insert it into the LAN port of the router, and the second plug into the socket on the back of the TV.
  • If the provider distributes a static IP, then you need to make some settings to activate.
  • To do this, enter the “Network” on the TV screen, write in all the necessary data (you can find them in the service provider agreement). Then save the data by clicking on the “Finish” button.

If the provider provides dynamic IP addresses, all settings will be done automatically, and the TV will immediately receive an individual IP address.

Is it possible to connect the Internet to a TV via a PC or laptop and how to do it

Synchronizing a TV and a personal computer is possible, and this has significant advantages for the owner: a high-speed connection for watching movies, convenient video calls, and convenient listening to music. To get started, connect the devices to each other via a wireless LAN or using a special adapter. After that, you need to turn on the DVD output on the TV, and launch two screens on the computer (on a laptop, this is done by pressing the FN button and the key, which shows two screens). It turns out that you seem to be connecting a large monitor (in the form of a TV), and the TV, accordingly, gains access to the Internet.

Internet connection via a router via Wi-Fi

Aim the antennas of the router correctly to pick up the best signal quality. The following settings are available for absolutely any type of equipment, so there should be no difficulties in this connection. We act according to the instructions.

  • We go into the network settings of the TV (note that the path to them may differ. different brands use their own operating systems, respectively, the interface also changes).
  • We find the item “Wireless connection” or “Connection via Wi-Fi”. Be sure to check the box next to “Wi-Fi: On”.
  • Then we search for available wireless networks, enter the Wi-Fi password and enjoy using the Internet.
READ  Samsung 30s settings

Now you can watch not only videos on TV, but also visit interesting sites or read articles.

How to connect a TV to the Internet: use a phone, PC, Wi-Fi or cable

A TV connected to an external network becomes more functional. If you previously viewed only the established list of channels, now IP channels and the ability to communicate on social networks, watching movies and TV series through a browser, as well as many other popular paid applications become available.

With a wired connection to your TV, your music listening experience will be top notch. In addition, you can connect applications for communication to the device. Skype, Viber and other instant messengers. Of course, such software will be able to provide full-fledged functions only if there is an installed Webcam. Not all TVs can boast of such advanced features. Some hardware does not support Flash Player, so you can only use the default applications. A prime example of such a TV is the Sony Bravia KDL series.

TV set

Turn on the TV and press the Smart button on the remote control.


Launch the Play Market by clicking on the shortcut in your smartphone. In the search bar, start entering Video TV-Cast, then select the found application and click the “Install” button.

And so, you have installed the TV-Cast application on your TV and smartphone, it remains to set up the connection and start using.

Setting up the connection between TV and smartphone in the TV-Cast app

Before setting up applications, make sure that both devices, TV and smartphone are connected to the same access point, and the TV-Cast program is installed on both devices.

Before using the TV-Cast application, you must configure the connection on both devices by entering the IP address on the TV obtained from the application on the smartphone.

Launch the TV-Cast app on your smartphone and then click a button or link to get the current IP address.

Now start the TV-Cast app on your TV, and using the remote control and the “/ up / down / left / right / numbers /” keys, enter the IP address obtained on the smartphone.

Once the connection is configured, the “Not Connected” icon will change to “Connected”.

With each subsequent connection, only the last digits of the IP address change.

How to watch movies from the Internet on a Samsung Smart TV

I bought a Samsung TV with Smart technology and 3D, somewhere in 2012, at that time it was a flagship model that incorporated all the latest technological innovations. If I began to use 3D technology almost immediately, then the functions of a smart TV Smart TV quite recently.

And all because all the delights of a smart TV are reduced to nothing without a good high-speed Internet. Therefore, as soon as I had a “normal” Internet, I immediately thought about the possibility of watching all kinds of video on the TV screen.

In general, I want to share with you (step by step) how to watch “any” video from your favorite sites, on a 3D TV screen Samsung Smart TV Model UA40D6600WR.

In order to set up a connection, you must have:

  • Smart TV with Wi-Fi connection
  • Smartphone for Android or iOS
  • Configured access point or Wi-Fi modem router with Internet access

TV set

Turn on the TV and press the Menu button on the remote control.
2. Go to “Menu” on the “Network” tab and select “Network Settings”.

Click the “Start” button, then select the type of network connection “Wireless”, the access point is “ASHW”, in my example it is ASHW, you naturally have a different one, enter the Password and upon completion “OK”.

After a successful connection, the wizard will inform you that the Internet connection is complete, otherwise, it will offer to restart the access point and check (re) enter the password!

Here are screenshots for Samsung TVs, which are logically easy to adapt to any model!


I hope you already know how to connect your smartphone to a Wi-Fi access point, if not, then just click on the “Wi-Fi Connection” icon, then select the desired network, in my example it is ASHW, you will naturally have another one, enter “Password” and click “Connect”.

Be sure to wait for the connection message, otherwise, restart your smartphone and re-enter the password.

Here are screenshots for the MEIZU smartphone, which are logically easy to adapt to any model!

And so, you connected both devices, TV and smartphone to one ASHW access point that has Internet access.