iPhone 11 screen not working
How to turn on / off iPhone 11 / iPhone 11 Pro / iPhone 11 Pro Max?
The number of buttons is getting smaller and this is both good and bad. Poor because it takes a little time to get used to new gestures.
But as soon as you get used to it, everything becomes very simple and clear. As practice shows, Apple changes only for the better.
iPhone 11, 11 Pro, 11 Pro Max Touch Screen Not Working (Fixed)
If you have used the iPhone X even a little, then this information will not be new to you. However, there is another category of users.
- Power on iPhone 11/11 Pro / 11 Pro Max. You need to hold down the button on the right until the Apple logo appears. Then, after a few seconds, the device is turned on and everything is ready to work.
- Restart / Shutdown iPhone 11/11 Pro / Pro Max. In the case when your device is just a little, you can get by with a regular reboot.
To do this, you just need to hold down the same button on the right until the slider appears and then swipe it to the right side (this is also the shutdown process).
15-20 seconds pass and then you can turn on the device by holding the button on the right.
If this button does not work for some reason, you can always carry out this procedure through Settings. General. Disable.
How to turn on, turn off, and restart iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max?
Freezing your iPhone, especially if it costs more than 1000, is not the most pleasant case. Apple technology has never been 100 percent perfect, and that’s a fact.
Therefore, sometimes it becomes necessary to reboot the device. If you do this on iPhone 11, iPhone 11 Pro or iPhone 11 Pro Max, then you already need to know a certain key combination.
Let’s go through in order how to properly turn on, turn off and, if necessary, hard restart your brand new “iPhone 11”.
How to Force Restart iPhone 11 / iPhone 11 Pro / iPhone 11 Pro Max?
Situations are completely different, especially if you are using the beta version of iOS and therefore, often a simple restart may not help.
After all, if the screen is completely frozen and you cannot do anything, then you have to resort to a hard reboot.
On the iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max, it works in a very specific way:
- press and release the Volume Up button;
- press and release the Volume Down button;
- press and hold the Lock button (button on the right) until the recovery screen appears.
As you probably guessed, the same method works for the iPhone XS as well. Basically, it fits all iPhones with cutouts.
How to restart iPhone if the screen is not responding to touches
In a standard situation, to reboot after pressing the lock button, you need to confirm the action by swiping your finger across the screen. But you can restart your smartphone even if the sensor does not respond. This procedure is called “Hard Reset” or “Hard Reset”. To do this, you must simultaneously press the lock and “Home” buttons on the phone. You need to hold them for a few seconds (about 10) until the screen turns off and the Apple logo appears on the display. This means that the smartphone has rebooted.
Possible consequences of rebooting without using a sensor
The “hard reboot” procedure is marked in the instructions as a last resort for cases when other, more secure, ways to turn off or restore the smartphone to work do not help. In fact, if you do not abuse the “Hard Reset” and do not use this method all the time, then there will be no negative consequences for the smartphone. However, with frequent use, there is a possibility of losing information that is stored in the smartphone’s memory. Hard reboots can crash or completely damage the iPhone memory module. The number of hard reboots and module failure are not directly related, but the probability increases over time. Thus, do not neglect regular data backups to iCloud and try to use “Hard Reset” as little as possible.
How to turn off iPhone if the screen is not working
If the touch screen stops responding to touches, this is not a reason to rush to the workshop. just try restarting your smartphone first. How to turn off the iPhone if the screen does not work, we will tell you in this article.
The first thing that is advised to do in case of any malfunction or freeze of the smartphone is to restart the device. However, the non-functional touchscreen makes the standard reboot procedure impossible. Below is a detailed description of how to turn off your iPhone if it freezes and the sensor does not work.
How to turn off iPhone if sensor is not working
When a reboot is not needed and you only need to turn off the smartphone, the algorithm of actions changes somewhat. The shutdown procedure is similar to the one discussed, only you need to hold down the lock and Home buttons for 4-5 seconds until the screen turns off and then immediately release it, without waiting for the logo to appear. In this case, the phone will not be switched on again (rebooted). To restart the smartphone after a hard shutdown, standard actions will be required. hold the power button for two to three seconds.
Unstable operation or complete failure of the touch screen is often associated with the following reasons:
- Mechanical impact (due to impact or falling of the phone).
- Ingress of moisture into the case (moisture protection for Apple smartphones does not guarantee complete impermeability).
- Overheating of the smartphone.
- IOS software crash or freeze.
- Poor quality protective glass or bumper.
And if it is better to contact the service center with mechanical problems, then in other cases it is worth trying to restart the iPhone. In the overwhelming majority of cases, this will be enough to restore performance. How to turn off the iPhone if the screen does not work, we will tell you in the following sections.
If all else fails
If the described methods did not work or you do not want to perform a hard reboot, then try other options. “Hard Reset” is a quick and easy way, but not the only one. Two more methods on how to turn off the iPhone if the sensor does not work are described below.
The safest option would be banal waiting for the battery to drain. The iPhone will turn off by itself and to turn it on again, you just need to connect the charger to it. This method is the safest for the phone and does not create additional risks.
Another fairly harmless and uncomplicated option would be to restore your smartphone through the iTunes media service. You will need a computer with the installed program and Internet access. Connect iPhone to PC with original USB cable and wait for iTunes to find and detect your device. If the identification stage has passed successfully, find the “Restore iPhone” button on the “Overview” tab and confirm the action.
In the process of updating and restoring factory settings, the program will automatically restart the phone. This iTunes function will delete all media files and other data from the device while it is running. Therefore, before starting the recovery, be sure to make a backup and save it to iCloud.
How to turn off iPhone 7
You can turn off the iPhone 7 differently from the 5 and 6 models. Now the “Home” button has become touch-sensitive, now an emergency shutdown is impossible. Let’s consider how else to reboot or turn off the device.
Disconnection with buttons
To “lull” the iPhone when the screen freezes or the sensor breaks, it is enough to use 2 main ones: “Home” and “Power”. You need to simultaneously hold down “Home” and “Power” for 5-6 seconds. A black screen will appear, restart will begin.
How to turn off iPhone 11
Holding down the power key on iPhone 11 activates the voice assistant. Consider the current ways to disable.
How to turn off iPhone if the screen is not working
To turn off the iPhone, if the screen does not work, then any of the methods does not work, because always swipe to the right before disconnecting. With a broken sensor, this is not possible. Consider what to do in such a situation.
Through the menu
To de-energize any model without using the buttons, go to “Settings”. Select “Basic”. Scroll to the very end of the menu and click Turn Off. A slider will appear, after swiping, the iPhone will be disabled.
How to turn off iPhone
Has the sensor stopped working on the device, and the buttons do not respond to pressing? Is it starting to feel like turning off your phone is an impossible task? The article discusses the key ways to turn off the iPhone and some of them do not even know avid “apple lovers”.
How to Unlock iPhone with Unresponsive Screen Easily
Justin Sabrina Updated June 16, 2020
“This morning my phone unexpectedly fell out of my hand to the ground and finally I got an iPhone with a broken screen. When I tried to unlock the screen password to access my contacts, I found that the screen was not responding at all. no matter how I touch him. How to remove the locked screen now when there is no answer from the phone screen? “
“How do I enter a passcode when my iPhone‘s screen is not responding? I found that my iPhone 8’s screen was suddenly unresponsive, I tried to do a soft reset, but it didn’t work. Now I cannot access my iPhone because it is impossible to enter the unlock password on the screen “.
If you are facing a similar issue and are worried about unlocking an iPhone with an unresponsive screen, here is a troubleshooting article for unlocking an iPhone with an unresponsive screen. If your iPhone’s touchscreen isn’t responding or working, we’ve come up with several working solutions. Both methods are simple, allowing you to unlock the lock screen when the iPhone touchscreen is not working or not working. So let’s dive deeper into the process of fixing an unresponsive iPhone.
How to Unlock iPhone with Unresponsive Screen Easily (100% Working)
Sudden irresponsibility of your iPhone can be fixed immediately with UkeySoft Unlocker. If your touchscreen is broken or the screen is unresponsive, obviously you cannot enter the password to unlock your iPhone. UkeySoft Unlocker helps you, it removes locked screen from iPhone without password. It is used to remove 4-digit / 6-digit passwords, Touch ID and Face ID on iPhone or iPad. In addition, users also reported that their iPhones were locked with iCloud Activation Lock because they forgot their passwords. UkeySoft Unlocker is also a good helper when you need to remove Apple ID from any iDevices without password or remove iCloud activation lock in iOS 13, 12 and earlier. Now follow the steps below to learn how to unlock iPhone from unresponsive screen without password using UkeySoft Unlocker.
- Unblock disabled iPhone / iPad / iPod touch without iTunes or iCloud;
- Unlock broken screen, locked, locked or black screen iPhone;
- It is easy to remove password from any disabled iPhone / iPad / iPod touch;
- High level of successful unlocking. compared to iTunes and other iOS unlocking software on the market;
- Unblock Apple ID from any iDevice without password;
- Unlock iCloud Activation Lock for your iPhone / iPad / iPod;
- Keep your apps and data safe while removing Apple ID.
Common Ways to Fix iPhone Black Screen Problem
What else can you do if your iPhone has a black screen but it works? Below we list simple methods that can also help in this situation. It should be noted that the result in the case of their use is not guaranteed, however, if you wish, you can start with them, as the simplest, and in which case it is never too late to turn to the above utility.
Briefly present the main characteristics of the program.
- The utility is able to fix more than 50 different iOS system errors that may occur on iOS devices, including the iPhone 11.
- Wide compatibility of the program (works with all iOS devices: iPhone / iPad / iPod, supports all versions of iOS, compatible with both Windows and Mac) makes it an indispensable assistant for any user of Apple products.
- The program allows you to fix the operating system of the device, while preserving all your data. this option is unique and is of great value for those who store important information on their iPhone and do not have a backup copy.
- The utility also offers an option to downgrade the system. efficiently and quickly: you only need to make a few mouse clicks.
- Able to help you find an error in iTunes. when restoring or backing up an iPhone. and achieve the desired result.
- If you are also the proud owner of an Apple TV, this program will solve any crashes that occur with tvOS.
- The Russian-language version of the program is available for installation.
- The utility interface is quite simple and does not require special knowledge or efforts from the user to achieve the goal.
As you can see, the program has many advantages and rightfully ranks first among the ways to solve the “Black screen on iPhone” problem. All you need to do is make a few clicks and in a few minutes your device will be up and running again. So, below we attach detailed step-by-step instructions on how to use the program to eliminate the black screen of death on iPhone.
Step 1 Download the installation file of the program from the official website of the developer and install the program on your PC. Run the program on your computer. Connect your iPhone to PC with a USB cable.
Step 2 In the program window, select the option “Fix the operating system”.
Step 3 Then click on the “Start” button. At this stage, you can also select the deep recovery mode by clicking on the corresponding link in the lower left corner of the screen (by default, the quick scan mode is set).
Attention: the developer does not guarantee the safety of the device data during deep scanning.!
Step 4 In the new window of the program, click the “Download” button to download the latest firmware version of the operating system. Using the “View” button, you can specify the path to save the downloaded file. If your computer already has files for installing the OS, open them in the program using the “Select” button at the bottom of the screen.
Step 5 After downloading the required files, click the Fix Now button. Wait for the process to complete without disconnecting the device from the PC. To close the program, click the “Finish” button. Your iPhone will restart normally and ready to go.
If the black screen on the phone has not disappeared, the utility offers a second, more radical method of solving the issue. restoring to factory settings. However, it should be borne in mind that in this case, all data on the iPhone will be deleted, so make a backup in advance and only then proceed to troubleshoot the problem. So, in order to factory reset iPhone using ReiBoot, follow these steps.
Step 1 Start the program on your computer. Connect your iPhone to PC with a USB cable. In the menu located in the upper right corner, select the “iPhone Factory Settings” option.
Step 2 The deep recovery mode window will open. Click on the “Start” button. Then, to download the firmware of the latest version of the operating system, click on the “Download” button.
Step 3 After the download is finished in the new window, click on the “Fix Now” button. The entire recovery process can take about 10 minutes. Do not disconnect your device from the PC. After that, iPhone 11 will restart normally.
Easiest Way to Fix iPhone 11 Black Screen Problem
Tenorshare, which produces professional software for eliminating any errors, failures and bugs of the iOS operating system, to solve this problem invites users to turn to the specialized program ReiBoot.
Force restart iPhone
In addition to using specialized software, you can try to simply reboot your device. This procedure helps to resolve many system or device errors. if they were due to any minor reasons.
To restart iPhone 11, X, XS, XR, 8, and 8 Plus:
Quickly press and release the volume up button.
Quickly press and release the volume down button.
Hold the side button until the Apple logo appears on the phone screen.
Press the side button and the volume down button at the same time.
Hold the buttons until the Apple logo appears on the phone screen.
To restart iPhone 6s and 6:
Press the side button and the Home button at the same time.
Hold the buttons until the Apple logo appears on the phone screen.
To restart iPhone SE, 5s and earlier:
Press the top button and the Home button at the same time.
Hold the buttons until the Apple logo appears on the phone screen.
Contacting the service center
If none of the methods solved your problem, you can contact the nearest service center for professional diagnostics and repair of your phone. It is worth remembering that during the troubleshooting process, all data on your iPhone may be deleted by the specialists of the service center, so try to make a backup copy of your data in advance. Subsequently, you can download them to your phone again.
When iPhone 11 was black screens of death, what can you do?
The iPhone has long established itself as a fairly stable and reliable device. But its owners also experience system errors, freezes and other not very pleasant situations. Recently, users of Apple products have begun to encounter such a phenomenon as the “black screen of death” more often. In this case, the device can be completely turned off, or it can continue to work, but the screen does not light up. New phone models come out, new versions of the operating system, but the crashes remain the same. So, what can you do in a situation if the iPhone 11 has a black screen of death? Our article is intended for those who find themselves in a similar situation and strive to find the best way out as soon as possible.
Sometimes the cause of a problem is so obvious that many do not even imagine it. If the camera does not work on the iPhone 6, 8, 11 and any other model, the screen is black, the phone does not respond in any way to button presses. the first thing to do is check the battery level of the phone, because it could simply be discharged! A separate instruction for this method is unlikely to be needed. just plug the iPhone into an outlet and wait a few minutes. Then try pressing one of the phone buttons. If the reason was a lack of charge, the screen will light up and display a rechargeable battery icon.
Screen freezes on iPhone or iPad: free up device storage
A freeze on the touchscreen along with a crash in applications can be caused by running out of storage space. Check if there is enough free memory on your iPhone or iPad. To do this, go to Settings. Basic. About this device. Available. If there are less than 200 megabytes left, iOS performance is noticeably reduced.
We described in detail how to clear memory on an iPhone or iPad in this article, suggesting 40 ways.
IPhone display not working: restart the device using a “hard reset
If your iPhone’s touchscreen suddenly stops responding to touches, do a hard reset.
4 Ways to Fix iPhone Touch Screen not Working | iPhone Screen not Responding to Touch |iPhone Repair
This reboot option is very simple, but the process is different for different iPhone models. In order to restart iPhone 7, you need to simultaneously press and hold the volume down button and the power button until the Apple logo appears.
To restart iPhone 6s and earlier, press and hold the Home button and the Power button at the same time until the Apple logo appears. If the touchscreen is working again after restarting the device, then the problem was caused by a software malfunction.
Screen (display) does not work on iPhone: possible solutions to the problem
On very rare occasions, the iPhone’s touchscreen stops working and responds to touch. You touch the display, but nothing happens. neither “tapes” nor “swipes” lead to the expected result. A freeze of the touchscreen can be caused by several reasons. software malfunction, breakdown of the display or the iPhone itself, etc. Here are some tips to help bring a frozen screen back to life.
Touchscreen not working on iPhone or iPad: wipe the display and hands
If the touchscreen suddenly stops responding to touch, first of all, wipe it well and dry your hands. Hold your iPhone up to the light and view from different angles. A build-up of grease or dirt, food stains, hand cream or lotions may be preventing the display from working properly. Take a piece of soft cotton cloth and use it to gently wipe the display to remove any dirt. For better cleaning, slightly dampen a cloth with water (water must not drip!).
Make sure your fingers are clean and dry. Wash your hands thoroughly, as a sticky finger can be the cause of a frozen touchscreen. Too dry skin of hands or calluses cannot cause malfunction, but wet or sticky fingers are another matter.
Screen freezes or does not work on iPhone or iPad: check if the display is intact and remember if the device has been dropped
If your iPhone or iPad’s display is cracked, then it is likely that this is what caused it to freeze.
If the device has been damaged as a result of a fall (there may be no external damage at all), it may stop working at all, or the problem only affects the touch screen. Falling iPhone or iPad could damage the internal touchscreen components. In this case, it is best to take the device to a service center.
Screen freezes on iPhone or iPad: uninstall or update problematic app
Sometimes a touch screen freeze is caused by launching a specific application. In this case, the problem is not connected with the iPhone display, but with this program, which freezes and stops responding to “taps” and “swipes”. Typically, pressing the Home button solves the problem. the application closes and you return to the home screen.
In this case, try updating this app first. Open the App Store, check if updates are available for the problematic program, and install them. If the application still freezes after installing updates, uninstall it from your device and reinstall it. If this does not help, then the problem lies in the program itself, and you cannot do anything.
iPhone 11 Touch Screen Not Working? Fix iPhone 11 Screen Unresponsive, Slow, Frozen Issue
The touch screen still doesn’t work?
If your iPhone or iPad’s touchscreen doesn’t work, and none of the above methods helped, we recommend backing up your device’s data and restoring iOS using iTunes. It will not hurt to make backups even if you decide to contact the repair shop, because the service specialists will probably also begin to reanimate the device with the software recovery process.
If the screen freezes, and the Apple logo is displayed on it, this is another problem (described in detail in this material), and it is not related to the display. Restoring the device using iTunes on a computer will also help solve this problem.
MAIN PROBLEMS »iPhone sensor does not work
IPhone SENSOR DOES NOT WORK
Sometimes you may notice that the iPhone sensor is intermittently not working for you. Or even the iPhone sensor stopped working.
This problem can arise due to several reasons:
- The iPhone sensor has stopped working, or only a part of the sensor is working, due to a mechanical failure due to the iPhone falling to the floor or being hit. Due to the impact, both the iPhone touchscreen itself and the case could be damaged;
- The iPhone touchscreen does not work due to moisture ingress. If liquid gets on the iPhone, corrosion and short-circuiting of the circuit board may occur, which will cause the iPhone’s sensor to fail;
- The iPhone’s touchscreen chip could fail;
- Faulty iPhone touchscreen controller. This issue can also cause the iPhone’s sensor to malfunction;
- In the previous service, low-quality spare parts were used during the repair.
What are the malfunctions of the Touchscreen iPhone?
- The iPhone touchscreen responds poorly to touches, or does not respond to them at all;
- IPhone screen responds to press with a delay;
- IPhone apps “take on a life of their own.” Programs spontaneously turn on or off abruptly. Text is randomly typed in messages. Pages are turned with difficulty;
- The sensor does not work in certain areas of the screen.
What to do if iPhone sensor is not working?
How to fix iPhone touchscreen problem?
one). If problems with the iPhone touchscreen do not occur often, you can try to restart the device.
For iPhone 4, iPhone 4S, iPhone 5, iPhone 5C, iPhone 5S, iPhone SE, iPhone 6, iPhone 6 Plus, iPhone 6S, iPhone 6S Plus, the following reboot scheme applies.
Simultaneously press and hold the Power and Home buttons for 15-20 seconds. If the restart was successful, an Apple (Apple logo) will appear on the iPhone screen. And after a while the iPhone will turn on.
For iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, follow these steps:
Also, as in the previous case, simultaneously press and hold the Power button and the volume down button for 15-20 seconds. If the restart is successful, the iPhone will display Apple and the phone will turn on.
2). The touchscreen of the iPhone does not work well if the protective glass is glued to it, a bumper or case is on.
These accessories may cause screen performance problems. The protective glass may not fit tightly to the screen, and as a result, the sensor will react poorly to interactions with it. Also, a protective bumper or cover can pinch or overlap the screen and indicate poor sensor performance. Remove all accessories and check if the screen is working.
3). If, after the previous recommendations, the iPhone sensor still does not work, the iPhone repair should be entrusted to professionals.
In a specialized Apple service center, the wizard will diagnose the iPhone sensor malfunction and offer options for iPhone repair.
If the reason lies in a malfunction of the display, the service will replace the screen.
In modern smartphones, the display module consists of several parts: a protective glass, a sensor (touchscreen) and a matrix. As a rule, if the iPhone touchscreen malfunctions, the entire display module is replaced. It is not recommended to replace the sensor or display cable separately due to the unreliability of this procedure.
How to turn on iPhone 10 if it won’t turn on?
Press and quickly release the volume down button. Press and hold the top button until the device starts to reboot. Continue holding the top button until the device enters recovery mode.
How to restart iPhone if black screen?
- Hold down the Home button (the largest button on the phone, bottom middle) and the Sleep button (the one on top that can unlock the smartphone).
- Hold down the buttons for 10 seconds.
- Your iPhone should restart. The screen will light up, an apple will appear.
What to do if the sensor does not respond to iPhone touches?
If the iPhone stops responding to touch, then there are several repair options: replace the entire module; replace the touchscreen (for this you need to disassemble the model). However, there are times when repairs, as such, are not required.
How to Restart iPhone 11 If Screen Doesn’t Work?
If the gadget is not responding or you just want to quickly restart your smartphone: press and quickly release the volume up button, press and quickly release the volume down button, then hold down the side button and do not release until the iPhone restarts.
How to unlock iPhone if the screen is broken?
Step by Step to Unlock Broken Screen iPhone
- Start Unlocking iPhone on Computer
- Connect iPhone to Computer
- Put iPhone into recovery mode
- Download firmware package
- Start Unlocking iPhone with Broken Screen
- Step 6.
What to do if iPhone has a black screen but it works?
You can restore a black screen on a working iPhone by rebooting. When the device freezes, restart usually helps. Press the power button and the Home button at the same time and hold for 20 seconds until the corporate logo appears. If the dark screen does not disappear after that, then the problem should be looked for in another.
Why iPhone screen doesn’t work?
If your iPhone’s touchscreen suddenly stops responding to touch, perform a hard reset. To restart iPhone 7, you must simultaneously press and hold the volume down button and the power button until the Apple logo appears.
How to Restart iPhone 10 If the Screen Doesn’t Work?
How to restart iPhone 10 if it freezes
- Hold and quickly release the volume up button.
- Hold and quickly release the volume down button again.
- Hold down the on / off button (Power key). Hold it until the iPhone screen darkens.
Screen stopped working on iPhone 4
Before rushing about in panic and looking for advice wherever possible, check if your device is frozen. Yes, Apple devices almost never freeze, which is why this phenomenon is mistaken for a breakdown. The non-working screen in this case is easily corrected by rebooting (holding the shutdown button and sleep / home). If this helps, but it is repeated often, immediately contact the service. the screen is in order, but the system itself or the components are “naughty”. they need to be repaired.
IPhone Screen Blank Causes Alarm
If the restart did not help or the apple symbol does not appear, go to the next step. Another reason why the screen on the iPhone 4 does not work may be its Chinese origin: non-original equipment breaks down very quickly, not to mention the fact that its repair exceeds, but then go broke on replacements.
Screen does not work on iPhone 4s after flooding
Having “expiated” your device, you run the risk of finally ditching it, so do the following as soon as possible:
- Turn off your phone;
- Disconnect the battery (you need a screwdriver for small screws, it is screwed on);
- Wipe off any visible water;
- Place iPhone in a container of rice and leave for 24 hours.
After that, the device can turn on, but it’s better not to risk it and contact the service. Instead of rice, you can use a hairdryer or a special cover, but in the case of a hairdryer there is a risk of damaging the insides and finally “killing” the device, and in the second case, the price of a cover may be higher than the price of repair from honest craftsmen.
Choosing a service
High-quality service is the key to the iPhone’s work
“IPhone works but the screen is black? Our masters know what to do! ” A similar statement in different forms is found in contextual advertising and in paper advertisements, the essence is the same: to lure you as a client. Do not get fooled by discounts and free diagnostics: a licensed service takes money for diagnostics, but then deducts its amount from the cost of the service. What to look for when visiting:
By the way, services that promise “only original spare parts” are often cunning: Apple does not have original spare parts, there are high-quality Chinese counterparts. The paradox is that phones are repaired with the same parts from which high-quality replicas are assembled. After handing over the device, do not forget to take the certificate of acceptance of the equipment for repair, in which the identifier of your iPhone must be indicated.
IPhone has blanked out screen, but it works. what to do
If the iPhone does not have a screen, not all owners know what to do, but meanwhile the question is very, very relevant: the cost of the display is high, so replacing it unknowingly can lead to unnecessary expenses. To avoid this, it is important to know two things: the reasons for the occurrence and how to fix the problem without harm to the phone.
IPhone 4 screen not working: what to do
Check the battery charge before disassembling
The first thing to start diagnosing with is checking the charge level. Oddly enough, one of the reasons people turn to Apple services is banal forgetfulness: a completely discharged phone may not turn on even when working from charging, which people who are especially prone to panic perceive as a breakdown.
If charging is okay, check your iPhone. It does not show the screen, but everything else works. you should think again if you or anyone else has ever poured the device, because the remaining moisture is insidious and hurts the entire device slowly, even if it worked before. There were no such cases? Well, you are a very neat user, so the reason that the iPhone’s screen stopped working, there is sound, and the calls go through, is either a breakdown of the screen as a whole, or a loose cable.
Having experience in assembling and disassembling complex electronic devices, you can independently disassemble your iPhone and check the reliability of the loop fastening, but remember: if the phone has a guarantee, this should not be done, then any service will withdraw the warranty due to opening.
There is no guarantee. there are no fears, you can check. In the case of a correctly looking cable, it is better to take the iPhone for examination. Advice for owners of CRT TVs and screens (if there are still any): do not put the device on them, the screen does not work for the iPhone 4c after a long lay. Either charging with reboot or service helps. The effect of the CRT on the iPhone screen is palpable.
iPhone works, but the screen does not light up
Often, by “off”, users mean insufficient backlighting, which confuses the wizards. If your screen just glows dimly, but the picture on it is clear and the device’s response is good, increase the brightness in the settings. 100% will help if the firmware is original and correct. A non-working point for changing the backlight can be the cause of an error during the update, this is corrected by the firmware, which is also better to do in the service.
If you don’t want to contact the service for such a trifle, try resetting the settings to the factory settings, it can also help. Do not get carried away with unauthorized flashing: the same JailBreaks are capable of injecting malicious code into the system, forcing individual iPhone nodes to malfunction.
The first step is to eliminate the possibility of software glitches and errors. This can be done at home, while you will save the time spent by the gadget in the service center, if it turns out that the cause of the malfunction is the breakdown of components.
First, make sure not to use test versions of iOS and developer firmware.
We have already described in detail how to roll back to the stable version of iOS and disable the ability to download beta releases of the system.
Restart your device and try to track down the problem.
Sometimes these glitches disappear after the gadget is restarted or Hard Reset. Read more about how to do this here.
Remove applications that are embedded in standard programs.
Sometimes, all kinds of extensions for the Phone (caller ID and filters for calls), Messages (add-ons for iMessage) or third-party keyboards from the App Store can lead to such failures.
Remove such programs while checking the smartphone.
Disable two important system settings. The incorrect response of the sensor can be affected by the iOS chips “Raise to activate” (Settings. Screen and brightness) and “Swipe to open” (Settings. Accessibility. Home button) on iPhone models without Face ID.
Turn both off and check for a glitch.
Restore the firmware on the device.
The last way to check if the software is working is to reset the device and restore the factory firmware. This way you can get rid of jailbreak-related glitches or system crashes due to regular over-the-air updates.
You can try a factory reset first, and then iOS restore. Detailed instructions are attached.
If all manipulations with the software did not give any result and the glitch appears with the same frequency, you should proceed to checking the accessories used.
Get rid of covers and cases.
First on the list of unsuccessful accessories might be the iPhone case. This is especially true for accessories that cover the screen or the top of the gadget from the front side.
The case can interfere with the correct operation of the sensors. This will happen both due to the banal closure of the sensors, and due to the presence of magnets in the case design.
Do not use removable accessories.
Removable accessories such as attachment lenses for a camera, aqua box or a tripod with a powerful mount can lead to problems with triggering sensors on the top of the smartphone.
For the duration of testing, discard such accessories.
Remove glass or protective film.
As much as you would like to remove the protective coating from the front panel, but in any case it will be removed when checking the gadget in the service center.
Perhaps it is poor-quality protection that interferes with the correct operation of the proximity sensor.
What to do if iPhone does not turn on the screen during a call
It is worth examining how the iPhone display behaves during a call. Especially in the event that a film or glass is stuck on the display.
Occasionally, the screen may not turn off when you bring your iPhone closer to your ear while on an active call. Or vice versa, do not turn back when moving away from the head until the end of the conversation.
There may be several reasons for this, so we will analyze each separately.
If all the described procedures do not give any effect, then the problems are with the iPhone components.
The device was damaged by being dropped.
Glitches and crashes may not start immediately after the fall, but after a few days or even months.
The gadget does not work after a poor-quality repair.
If the device was in the hands of the craftsmen from the basement SC, it could well damage something or connect it in the wrong way. The cable could be incorrectly laid, which was frayed during operation, the module could have been completely forgotten to fix and over time it moved out and stopped falling into the corresponding hole.
If the screen was changed in the iPhone, then the matter may be in a poor-quality unit with sensors.
Smartphone didn’t survive swimming in water.
The presence of moisture-proof does not guarantee that after the next hit of liquid on the case, it will not be inside.
So even after a long time after getting wet, any components of the iPhone may fail.
In any case, there is only one way out. a trip to the service center.