iPhone 6 does not catch the network

Time correction to restore access to the cellular network

  • Connect to an active Wi-Fi network.
  • Go to Settings. General.
  • Open Date and Time.
  • Activate the item Automatically.
  • If the switch “Default” is active, then turn it off and turn it on again.
  • Restart iPhone.

As you can see, the method is very simple and at the same time quite effective. However, you definitely need to be connected to a Wi-Fi network for the iPhone to register with Apple’s server. Otherwise, the cellular connection will not come to life.

iPhone does not see the network. simple solution to the problem

After manipulating the iPhone‘s firmware or hardware, it is not uncommon for the iPhone to not see the network. There can be many reasons for this problem, but one of the most common is a failure in the current date and time zone settings. Today we will look at the main ways to solve this problem.

After flashing iOS or replacing the SIM card, it happens that the iPhone says “no network”. In place of the operator’s logo is the inscription “No network”. This situation immediately reduces the capabilities of the device and actually turns it into a player. Often, users take the device to a service center, where they try to return the connection for an additional fee, although in most situations, the problem when the network on the iPhone is lost can be solved on their own.

The secret lies in the peculiarities of the operation of iOS itself. iPhone will not pick up the network if the time zone and date / time do not match the current values. It is very easy to fix the situation by simply connecting the smartphone to a Wi-Fi network and performing a number of simple manipulations.

iphone, does, catch, network

How To Fix No service iPhone 6,6s, Problem Software

What to do if there is no wireless access point nearby?

In this case, the simplest solution would be to create a Wi-Fi network using another iPhone that can connect to the mobile Internet and distribute the wireless network. It is quite simple to do this:

  • Go to Settings. Cellular. Cellular data network.
  • In the Modem mode section, in the APN field, enter the network identifier. It depends on your mobile operator. The corresponding settings can be found in the technical support of the operator.
  • The Username and Password fields can be left blank.
  • Return to the Cellular menu and go to the Modem Mode section.
  • Activate Tethering.

After these manipulations, a new item will appear in the main settings menu. Modem mode. After its activation, the device will start to “distribute” the Internet.

If this method is also unavailable (the “network search” inscription is saved on the iPhone), then all that remains is to restore the iOS firmware.

First, you will have to download the firmware file, connect your smartphone to a computer with iTunes installed. In the app, select Recover.

It is important to remember that the recovery procedure will delete all personal data and settings from the mobile device.

If even after these manipulations the iPhone does not levitate the network, then the problems may be associated with the hardware of the device and you cannot do without a trip to the service center.

iphone, does, catch, network

Internet settings in iPhone with iOS 10

In the first example, the Internet settings were shown using the example of older versions of iOS. In order to turn on the Internet in an iPhone with a more recent firmware (for example, iOS 10), do the following. If you do not have a SIM card yet, then we purchase a SIM card, having previously decided on a more suitable tariff plan. Get the settings brochure from the seller immediately

Now go to the Settings application and select. Cellular. Data Options Next, select. Cellular data network, and register all APNs (and, if necessary, other sections). In the example above, the settings of the Tele2 operator are indicated, you need to enter the settings of your operator.

We make the settings for the Internet, which you can find out from your mobile operator or search in the existing list given in the archive below. Fill in the fields in small, English letters, as in the examples given:

MTS APN: internet.mts.ru Username: mts Password: mts

Beeline APN: internet.beeline.ru Username: beeline Password: beeline

Megaphone APN: internet Username: blank Password: blank

Tele2 APN: internet.tele2.ru Username: empty Password: empty

You can search for your operator’s settings in

Software malfunctions

It cannot be ruled out that when the iPhone writes “No network” on the display, this is directly related to software errors. In most cases, they are fixed by the developer himself.

When releasing the next version of the mobile operating system, it is thoroughly analyzed for errors and vulnerabilities. If they are found, corrections are made to the firmware, and these changes are sent to users along with other add-ons in the form of updates.

Therefore, the first thing to do when you do not know why your iPhone suddenly loses its network is to update your smartphone by installing the latest available firmware on it.

Poor coating quality

Unfortunately, not a single Russian mobile operator can provide high-quality and uninterrupted coverage throughout the country. As a rule, this problem is not observed in large cities. However, if you are in an area, you should assume that there is no connection because the iPhone cannot catch the network. In this case, the problem will be solved automatically as soon as the quality of the cellular signal is improved.

Flashing

But you should not be afraid of updating the current firmware on the iPhone. over, it is a useful and sometimes simply necessary procedure that has a positive effect on the operation of the device.

You can update directly through the gadget settings. Alternatively, the phone connects to a computer where iTunes is installed. Next, the program should recognize the connected device. By opening the “Overview” tab, all the characteristics of the smartphone, including the firmware version, will be displayed here. By clicking on the “Update” button, the current firmware will be installed on the iPhone, if available.

Hardware problems

Sometimes there is no network on the iPhone due to damage to the hardware: antenna, motherboard and other important parts of the device. In this case, the user will have to contact gadget repair centers.

Damage or failure of the SIM card

In the process of solving the problem of finding a network on your own, you should pay attention to the SIM card. Often, it can be damaged during cutting, it can fail if it gets wet or for other reasons. Pull out the SIM card using the key in the box from under the phone, put the SIM card in place. Turn on. turn off the airplane mode several times.

Damage to the antenna responsible for receiving the signal of the cellular network

Often there are times when the iPhone has stopped catching the network due to damage to the antenna due to shock, moisture and oxidation, previously carried out repairs, defective parts. To eliminate such a malfunction, you need to contact us at iConceptService, where qualified technicians will diagnose and be able to repair the device.

Incorrectly set time in the settings

This happens after updates and flashing, as well as after repairs in service centers. To fix this problem, you need to connect to a wi-fi network. Then go to Settings. General. Date and Time and activate the item Automatically. Restart your phone. Please note that these actions must be carried out being necessarily connected to a wi-fi network, otherwise the cellular network will not come to life.

READ  The Computer Turns On But The Monitor Does Not Show

iPhone locked by carrier

It happens that a gadget is blocked by a telecom operator for a SIM card of a certain operator. The phone simply does not support other SIM-cards, it says “no network”. You can contact us at the service center, we can unlock by IMEI. As a rule, such a service takes from several days to 10 days, depending on which operator the device is locked to.

Cellular operator settings and updates

Have you checked the date and time, and the message “no network” has not disappeared? The operator may not provide its services in the region where you are located. Then you can try to activate the “airplane” mode for a few seconds. We do the same if you are in your home region. It happens that the connection is “buggy” and you just need to restart it. You can also turn off and on the device. If this does not help, then you need to check the operator settings. Go to Settings. Operator and check if the Automatic mode is activated.

Do not forget about the update for the system. Connect to Wi-Fi again. Go to Settings. General. About this device. If updates are available to you, the operating system will ask you to install them. If Wi-Fi does not work, connect to iTunes. Then update your device to the latest iOS version.

iPhone does not catch the network?

Often, after a fall, flashing or updating the phone, as well as replacing the SIM card, the smartphone does not catch the network. An inscription “no network” appears and, in fact, the device turns into a useless expensive “brick”. There are usually several reasons for this problem. Let’s look at the most common of them, while paying attention to ways to troubleshoot a problem called “no network”.

Damage to the modem part and eternal network search

If the modem part on the motherboard is damaged by shock or moisture, the phone will constantly search for the network and the modem firmware will be absent in the settings. To make sure your modem is not damaged, go to Settings. General. About this device. Modem firmware. If the field is empty, then your phone has received damage to the modem and only qualified service center technicians can help you here. It will take painstaking, complex work on the motherboard, which will allow you to restore the modem part and return the device to the ability to see the network. Our craftsmen have extensive experience in this work, which allows us to carry out even such complex repairs.

Factory Restore

In cases where the iPhone does not see the SIM card, there is no network or the smartphone does not ring, resetting to factory settings often helps. this allows you to get rid of malicious files. Remember that this method will help you troubleshoot system problems, but all applications and games on your phone will have to be reinstalled.

IPhone Factory Restore Steps:

  • launch iTunes on computer
  • connect the gadget to the PC
  • select your device in iTunes
  • click on the “Browse” tab
  • select “Restore”
  • confirm the recovery procedure

Apple recommends that you always use original USB cables and adapters. Using analog wires can lead to software installation failures. Before restoring the device to factory settings, you can save the data to iCloud. Backups can also be done on iTunes.

How to fix system crashes

Before fixing the problem, inspect your iPhone for damage. Any chips and scratches can cause hardware problems. only experienced technicians can fix them efficiently.

  • restart iPhone
  • reset network settings
  • software upgrade
  • replacement of the antenna responsible for the operation of the network

Persistent problems with the mobile network can occur due to a malfunctioning SIM card. To replace the card, contact your mobile operator.

After activation, the iPhone may not be detected on the network due to overheating. High and low temperatures lead to disruption of the smooth operation of the gadget. Before changing the settings of the cellular network or giving your smartphone for repair, leave it for 15-20 minutes at room temperature. Then restart your iPhone. if after the update it still does not see the SIM card, perform a factory reset by following these steps:

  • click on the category “General”
  • select “Reset”
  • click on the “Reset Network Settings” tab

Resetting the network settings on iPhone will update the rest of the settings, including APN and VPN. You will also have to re-enter all passwords and search for Wi-Fi networks.

If after these procedures there is still no network signal or the SIM card is not detected, check the coverage area. see if the receipt of data from the mobile operator is activated.

Iphone 4/5/5s/6/6s/7/8/10 no service problem fix || fix no network problem on iphones||

Why does my smartphone work intermittently?

Problems with your cellular carrier can occur due to a small software glitch in your iPhone. In this case, to restore Apple technology, it is enough to restart the device. If the phone after the update does not see the SIM card or writes: “no network”, the cause of the malfunction may be more serious.

The phone may not detect the SIM card in the following situations:

  • wear of the modem, antenna or other parts
  • moisture penetration into the iPhone case
  • SIM card lock
  • network problems due to malfunctions of the mobile operator

Network problems can appear due to late software updates or malfunctions after factory unlocking. In the latter case, the SIM card is successfully registered, but the iPhone cannot find the mobile operator.

Also, network problems can arise after disassembling the iPhone. If you do not have the special tools recommended by Apple, do not perform your own repairs. You can not only incorrectly connect the cables, but also damage the motherboard.

IPhone is offline

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

If the iPhone has no network, the reasons for the malfunction may be incorrectly set parameters or mechanical damage to the device. You don’t have to go straight to the wizard to find out why the iPhone can’t find the SIM card. Try to diagnose yourself. reset the settings or restart your smartphone. If the iPhone does not catch the network due to a malfunction of the modem or wear of the parts responsible for activating the mobile operator, you need to contact a specialist.

How to download updates

Persistent interruptions or poor signal strength may be due to outdated network settings. If you inserted a SIM card into the iPhone, but the smartphone does not ring, update the cellular data. To do this, after activating the SIM card, follow these steps:

  • connect your phone to wifi
  • select “Basic”
  • click on the “About this device” tab

If new options are available, your mobile operator will automatically prompt you to search for and install them. Each time you insert a different SIM, download new settings to improve connectivity.

Network problems also depend on the quality of service. Before sending your iPhone for repair, contact your mobile operator and find out all the important information:

  • state of an account
  • changes in tariff
  • information about interruptions in the work of a mobile operator
READ  Check iPhone by IMEI on Apple website

If after these steps the signal is still not available or the SIM card does not work, you need to look for other causes of the problem.

When a professional repair is needed

If you have tried all the methods, but the phone still does not pick up the network, and you do not know how to fix the situation, contact qualified technicians for help. Most likely, network problems arose due to hardware problems. the wizards will fix them after disassembling the device.

On the YouDo site, you will quickly find contractors who specialize in the repair of Apple appliances. Yuda professionals offer favorable terms of cooperation:

  • high-quality iPhone repair using modern tools and original parts
  • home visit at a convenient time for you
  • restoration of the device in accordance with the manufacturer’s recommendations

If the iPhone does not have a network or the SIM card is not available, leave a request on the Yudu website. experienced service providers guarantee efficiency and excellent quality of repair.

No network on iPhone 6

We are often approached by users who complain that there is no network on the iPhone 6. Several different breakdowns can lead to this, but all of them are easily eliminated by the specialists of our service center. So, if your iPhone does not find the network, then it is quite possible that:

  • The problem is with the antenna. To fix the malfunction, the antenna will have to be changed.
  • The radio path is out of order. This component is subject to repair, and with a qualified approach can be restored.
  • Doesn’t connect to iPhone 6 network even when moisture gets into the device. In this case, it is necessary to carry out a comprehensive restoration after corrosion.
Seize the moment: Seasonal discount 40-70%.
Photo problem the name of detail iPhone6S / 6S iPhone6 ​​/ 6 iPhone5S / SE / 5C / 5 iPhone4S / 4 Services S.C.
Doesn’t catch the network Part: Antenna Description: poorly catching the network or not at all.Repair time: 40 min.

It is possible to eliminate any of the breakdowns that lead to the fact that the iPhone 6 does not see the network quickly and efficiently at the Apple Telemama service center. Our service professionals will carry out the repairs with impeccable quality and in the shortest possible time. We accompany any performed repairs to replace a component with the issuance of a warranty card, which can be used for a whole year.

  • The trust of our customers is based on the transparency of our and the high quality of our services and components. All current for today you can find in the price list.
  • The first thing to do if the device loses the network is to diagnose. Here it is performed completely free of charge. After it, you will find out the exact cause of the breakdown and will be able to determine the cost of its elimination according to the price list.
  • Becoming our regular customers, gadget users can repair equipment at the lowest price without expecting any promotions or discounts.
  • If your iPhone does not catch the network, the breakdown can be fixed in the Telemama service at cost. To do this, you need to take advantage of the offer of any of the promotions held in our center. After such repairs, you will also receive our regular full year warranty.
  • To offer you the most loyal prices, we purchase all parts for iPhones in bulk directly from the manufacturers.
  • Installing only original spare parts, we are absolutely sure of their excellent quality, therefore, after each repair we issue a guarantee.
  • Is there no network on the screen of your iPhone? Don’t hesitate to visit us. We will solve this problem as quickly and inexpensively as possible.
  • By calling the courier to your home, you can save time. He will take care of the fast and safe delivery of the device to the service.

When the device does not find the network, there is always a way out! After all, our masters will be able to carry out repairs of any degree of complexity.

IPhone 6 Screen. 6900 3290 iPhone 5 Screen. 2890 1890 Screen iPhone 5S / SE / 5C. 2890 1890 Screen iPhone 4 / 4S. 2114 1510 Glass iPhone 3. 1900 890 Installation. 680 (original 1 year warranty) Next.

Replacing parts on the iPhone: Speaker. 900 650 Microphone. 900 650 Home button. 1100 520 On button. 1400 510 Camera. 1680 1200 WI-FI antenna. 900 650 Installation. 680 discounts.

iphone, does, catch, network

Why the iPhone does not see the network?

Apple makes one of the best smartphones out there. iPhone. But even he sometimes fails his owners. There are times when “Search” or “No network” is written on the phone screen instead of the operator’s logo. Questions about why the network disappeared on a smartphone most often come from owners of iPhone models 4, 5, 6, 7, 8, X, less often. XR, XS, XS Max.

What could be the reason for this? What if the smartphone does not catch or is constantly looking for the network? Does this mean that something is wrong with the device and it is broken? In this article, we will try to figure out why this is happening, consider the most likely causes of such a problem and offer options for solving it on the iPhone.

Network disappeared after Jailbreak

Sometimes iPhone network gets lost after jailbreak. This is especially true for those models that were originally locked for a specific telecom operator. In such cases, it is best to take the phone to a service center, where it will be unlocked by IMEI. However, this procedure can take several days, depending on which operator the smartphone is blocked by.

No network when roaming

It often happens that the iPhone loses the network of the cellular operator abroad when using the roaming service. The most likely solution to this problem is to switch your smartphone from 4G to 3G mode. The fact is that mobile operators, for the most part, do not provide services abroad in LTE networks. Plus, owners of the latest iPhone XR, XS, and XS Max often complain about network issues when using 4G mode. Therefore, it will be advisable to switch to a third generation network. This can be done in the menu “Settings”. “Cellular”. “Voice and data”.

If this does not help, then you can do the following:

  • turn the device off and on again;
  • take out and re-insert the SIM-card;
  • reset network settings in the menu “Settings”. “General”. “Reset”;
  • update to the latest software version;
  • reset your smartphone to factory settings;
  • update the settings of the mobile operator in the “Settings”. “General”. “About this device” menu when Wi-Fi is on.

It may also be that the mobile Internet does not work in roaming. In such cases, you need:

  • go to “Settings”;
  • go to the “Cellular” submenu;
  • find the menu item “Data parameters”;
  • move the slider “Data roaming” to the active position.

If none of the above worked and the smartphone still shows that the network is unavailable, then you should contact the technical support of the operator for help.

Another reason the iPhone can’t find the network is that the mobile operator is not providing its services in the region. That is, it happens that when entering an area where the coverage of a telecom operator is absent, the network disappears, and leaving it does not appear. In some cases, this can be corrected by activating the “Airplane” mode for a while or by turning the device off and on again. This will help reboot the frozen network.

READ  How to create a copy of iPhone to icloud

No network after flashing, iOS update, factory reset

Sometimes it happens that after repairing the device, updating the operating system, flashing or resetting to factory settings, the iPhone loses the network, and the operator’s logo does not appear on its display. Instead, you can see “Searching” or “No network” on the screen. This is especially true for iPhone models 7 and 8, as well as earlier. 4, 5 and 6. The first thing to do in such cases is to make sure that the SIM card is working properly. To do this, you just need to install it in any other phone.

If the SIM card is working, but the problem remains, you should pay attention to the correctness of the time display on the device display. If the current date and time is displayed incorrectly, which happens quite often after repairing a smartphone in a service center, as well as after self-flashing or updating, you must perform the following steps:

  • connect to Wi-Fi;
  • go to the “Settings” menu item;
  • in the submenu “General” find “Date and time”;
  • move the “Automatic” slider to the active state;
  • if this item is active by default, deactivate and reactivate the slider;
  • restart smartphone.

It should be remembered that the phone must be connected to a Wi-Fi network without fail, otherwise no changes will occur to the cellular network.

If there is no access point nearby, you can create a Wi-Fi connection using a second iPhone that has access to the mobile Internet. This can be done as follows:

  • enter the “Settings” menu and go to the “Cellular” menu;
  • click on the item “Cellular data network”;
  • go to the “Modem mode” section;
  • enter the network identifier in the APN field, which can be found in the technical support of your operator;
  • the fields “Username” and “Password” are optional;
  • return to the “Cellular” submenu and switch the “Modem mode” slider to active state.

After these manipulations, the gadget will begin to “distribute” the Internet.

Loss of network after replacing the SIM card

There are also cases when the iPhone does not see the network after replacing the SIM card. Such a problem, like the previous ones, can occur in absolutely any model. If this happens, then the first thing to do is to get out and examine the SIM card. It can deteriorate when trimmed by yourself, when water gets on it, or for some other reason. In the event that it is damaged, it will have to be replaced with a new one. The operability of the card can be checked by inserting it into another smartphone.

In some cases, it helps to simply pull out the card and put it back in again. It happens that the network simply “glitches”, and such a simple procedure can restart it. Also, as in the previous cases, you can try to turn off and then turn on the smartphone, or several times to activate and deactivate the “Airplane” mode.

Firmware

Updating iPhone firmware to the latest version is one of the options for self-solving the problem.

What to do if Wi-Fi is not working well on iPhone 6 / 6s / Plus?

This problem is found on some iPhone models. However, it was noted that it is the owners of the iPhone 6 who most often complain about the fact that their device does not pick up Wi-Fi well.

Here are the main symptoms of an iPhone with Wi-fi. Familiar?

  • The gadget only catches the network at a short distance;
  • iPhone does not catch the network (does not see it at all);
  • Internet is constantly interrupted.

iPhone 5/6/6s: No Service or Constantly Searching. 9 Possible Fixes!!

In this article, we will consider all possible ways to solve the problem at home, from the simplest to the more sophisticated and complex.

What to do if the iPhone is not picking up the network well? The way to solve the problem is as follows

Reset network settings

Instructions on the procedure for resetting the settings: go to the menu “Settings” → “General” → “Reset” and press the button “Reset network settings”.

It is not recommended to do a factory reset. If necessary, save important information, for example, upload it to the cloud.

What to do if the problem is with the router?

If, after checking the connection of other devices, it turns out that the router is to blame, the following options can help:

  • Restarting iPhone sometimes saves.
  • Reset the router settings using the “RESET” button. However, if you are unable to re-configure the device, it is better to consult the wizard.
  • Go to the router interface and change the region “Russia” to “America”.
  • Sometimes changing WPA2 / WPA to WEP helps. Of course, this is an old and unreliable encryption method, but in some cases it helps to restore the connection to the Wi-Fi network.

Reconnection

Sometimes you just need to reconnect to the network. To do this, you need to forget the network in “Settings”. “Wi-Fi” and reconnect to it.

Don’t forget to check if you wrote the security key correctly!

Non-standard ways

  • You can try connecting to a faster DNS server. In the Wi-Fi settings, from the right edge of the screen, you need to click on the letter “i” and select the Google or OpenDNS server from the specified ones.
  • You can switch to another broadcasting channel. This helps in apartment buildings when many networks are connected to one channel. To do this, you really have to go to the router interface and change the channel yourself.
  • Installing a security key to your Wi-Fi network will also help. If the network is “not password protected”, that is, it is open, unauthorized users, for example, neighbors, can connect to it, which threatens with connection problems and a decrease in the data transfer rate.

Force restart your phone

It is better to start with the most likely method. restarting the phone. It instantly clears some minor iOS software bugs. To restart the iPhone 6/6 s plus, you need to hold down only two buttons: “Power” and “Home” (for iPhone 7 / 7s plus. the volume down button).

complicated procedure for iPhone X (but similar to restarting the 8th iPhone). It is necessary to alternately press and immediately release the volume up / down buttons. Then, on the other hand, hold down and hold “Power” until the Apple logo appears.

We solve the problem ourselves

Before “picking” the iPhone, first it is better to check for faults in the router itself. This is easy to do. Check how other devices work when connected to a Wi-Fi network. If the internet speed is stable and good, then the problem is not with the router, but with your iPhone.

What to do? What measures should be taken if the iPhone 6 or iPad does not catch Wi-Fi well and stubbornly refuses to see the network?

Draw your attention to! If the iPad cannot connect to the network or does not see it, the solutions are the same as with iOS smartphones.

BICBON.COM 2021