iPhone stuck on apple while updating

Method 2: Force Restart to Fix iPhone Stuck on Update Panel

The most popular solution to fix iPhone errors is to restart iPhone. However, it is not suitable for fixing iPhone stuck on iOS 11/12/13/14 update. You need to force restart iPhone instead of soft restart. Apple has released a variety of iOS devices. Thus, you need to press different buttons to completely reboot the iPhone.

Press and release “Volume Up”. Then press and release the “Volume Down” button. Press and hold the sleep / wake button until you see the Apple logo.

iphone, stuck, apple, updating

Press and hold the “Volume Down” button and “Power”. Don’t let go of them until you see the Apple logo. Later, your iPhone freezes at the update loading screen or other frozen cases should return to normal.

Press and hold the “Home” button and the “Sleep / Wake” button for about 10 seconds. When you see the Apple logo, release these two buttons to unfreeze the iPhone.

  • Hard reset iPhone X / 8 Plus / 8
  • Hard reset iPhone 7 Plus / 7
  • Hard reset iPhone 6s Plus and earlier

Forcing the iPhone to restart can disable all running apps in the background. So, if your iPhone freezes due to system error, you can successfully fix iPhone stuck on update screen.

Method 3. Fix iPhone Freeze When Updating Using Recovery Mode Restore in iTunes

If your iPhone is frozen while updating with a progress bar, or your iPhone is frozen during updating for several hours, force restarting iPhone may not work. During this time, you can fix the stuck iOS 14/13/12/11 update on iPhone by going into recovery mode. Before unfreezing iPhone during or after iOS update, you need to update iTunes to the latest version first.

Close iTunes if it’s already open. Connect iPhone to computer and launch iTunes. Force restart your iPhone to see the recovery mode screen. Select “OK” if you receive a notification that iTunes has detected an iPhone in recovery mode.

Select “Update” if you are prompted to restore or update your iPhone. You can protect your iOS data without erasing it and reinstall iOS at the same time.

After the iPhone update process is complete, you need to set up iPhone.

Key Features of Fix iPhone Stuck on App Update

  • Fix iPhone stuck on Apple logo, DFU mode, loop restart, recovery mode and other situations
  • Detect your device and restore iPhone system from abnormal to normal
  • User-friendly interface and easy to use

Method 1: Best Way to Fix iPhone Stuck on Update (No Data Loss)

Most helpful solution to fix iPhone stuck on update download screen. this is using Apeaksoft. IOS System Recovery. You can quickly and easily return a frozen or disconnected iPhone to normal. Whenever your iPhone freezes while updating or other abnormal situations, iOS System Recover can fix iPhone without data loss. Plus, it supports all iOS devices, including iPhone 12 Pro Max, 12 Pro, 12 mini, 12, 11 Pro Max, 11 Pro, 11, 11 Pro, XS Max, XS, XR, iPhone X / 8 Plus / 8 / 7 Plus. / 7 / SE / 6s Plus / 6s / 6 Plus / 6 / 5c / 5s / 5, iPad and iPod models.

iPhone Stuck on iOS 14/13/12/11 Update Screen: Here’s How to Fix It

How to get iPhone out of update screen? This post shows 3 solutions to fix iPhone stuck on update screen. Apeaksoft iOS System Recovery fixes iPhone stuck on update screen, Apple logo, DFU mode and more.

When updating iPhone to the latest version, you can see the update confirmation. A typical iPhone update only takes a few minutes. However, if your iPhone is stuck on the iOS 14/13/12/11 update screen, etc. for several hours, you need to fix iPhone freeze issue as soon as possible.

It is disappointing that the iPhone freezes when updating iOS to the latest firmware. Nothing left but a frozen iPhone screen with a progress bar. So what should you do when iPhone is stuck on updating ?

Why is iPhone stuck on Refresh

In fact, there are many reasons iPhone might be stuck on the update screen. This is one of the most common iPhone update issues and often occurs during or after an iOS update. And it’s hard to pinpoint the real cause if your iPhone crashed or sustained other physical damage. Below are common reasons explaining why the reliable iOS 12 update failed or stuck. You can read and determine why iPhone stuck during the latest iOS update.

  • If your iPhone doesn’t have enough storage space, then your iPhone is stuck at the download update screen.
  • An unstable or poor Wi-Fi connection can cause iPhone to freeze while installing an update.
  • If your iPhone is overheated, then it is frozen and stuck in an update request or progress bar.
  • System errors should also be blamed if your iPhone freezes during the update, like corrupted apps and data.

If you have identified the real reason iPhone is stuck on update, you can go to related solutions to quickly fix frozen iPhone during update.

How to fix iPhone stuck on update without data loss

If iPhone is stuck on downloading updates screen, the problem still exists, you can count on a professional iOS System Restore to get rid of this situation. You can download it for free and try.

Step 1. Run iOS System Restore

Download and install the program for free on your Windows or Mac computer. Connect iPhone to computer with USB cable. Later select “iOS System Restore”.

Step 2. Start fixing iPhone frozen during or after iOS update

Click “Start” after reading the information below. You should know that your iPhone will be updated to the latest iOS version when you fix iPhone stuck during iOS update. In addition, the iPhone will be restored to a non-jailbroken state after being jailbroken.

Step 3. Put your iPhone into recovery mode

Follow the instructions on the screen to enter Recovery Mode or DFU Mode manually. After that, iOS System Recovery will be able to detect your frozen iPhone successfully.

Step 4. Fix iPhone Stuck on Update Panel

Check the information of the detected iPhone carefully. Hit “Repair” to download the firmware package and safely fix the frozen iPhone. It will take a few minutes for your iPhone to freeze when updating due to freezing at the Apple logo or progress bar without losing data.

Tip: Frequently Asked Questions to Fix iPhone Freeze on Update

While your iPhone is stuck on iOS update, you can stop the iOS update during the download process. Go to Settings on iPhone, tap General, scroll down to select iPhone Storage, then scroll down to find the latest iOS version, tap a version and tap Uninstall Update to exit the stuck iOS update.

How long does it take to update iOS?

The time it takes to update iOS depends on the internet connection and other elements. Generally speaking, it will take about 30 minutes for the iOS update to complete if your device and internet are working fine.

How to fix iPhone stuck checking for update?

Generally speaking, it will take a few minutes to check for an iOS update. However, once your iPhone gets stuck in checking for an update, you can try to force restart your iPhone.After that, if that doesn’t work, just contact Apple Support for help.

There is no need to panic when your iPhone is stuck on the iOS update screen. After reading this post, we can find out why your iPhone or iPad is frozen during the update process.Also, you can find effective solutions (especially the powerful iOS System Restore) here to help you out of this situation. Just read and try the methods above to fix iPhone update problem.

IPhone Recovery

The main disadvantage of restoring is deleting settings and content. If you recently made a backup, then the losses will be minimal, but still you cannot do without them. a working phone is more important. Since you are dealing with a software error, to fix it, you need to put the phone in DFU mode.

If the call does not go through, or you cannot find the files responsible for the error, then you will have to restore the iPhone to fix the problem.

Reboot the device

First of all, you need to determine the reason for the device freezing. This problem is often encountered by users who use the jailbreak system. The error can occur when the machine crashes or restarts. If “iPhone 5” hangs on an apple, what to do and how to return it to working condition? Regardless of the model of the mobile device, the operation can be restored by rebooting. To do this, just press and hold the volume and power buttons at the same time for 10 seconds. Often, after performing this manipulation, the device works well and boots.

How to identify hardware failures?

In the process of updating the operating system, all components of the mobile device are checked. If some programs do not work correctly, after carrying out this procedure, the phone may not turn on at all.

“iPhone” stuck on an apple: what to do? Before deciding on an algorithm of actions, you need to understand the cause of the problem. Hardware problems include:

  • faulty charging controller (often appears when a mobile device is dropped);
  • breakage of the Power button;
  • malfunctions in the power supply of the device (in case of network jumps);
  • incorrect battery operation;
  • software error;
  • problems with the motherboard;
  • failure in the phone memory;
  • failure of storage chips.

The most difficult cases include power problems and a malfunction of the device’s central processor. In the situations presented, the percentage of successful repair and stable operation of the smartphone is small.

Recovery through the program

If the “iPhone” hangs on the apple, what to do if nothing helps and the device does not turn on. In this case, you can put your smartphone in DFU mode using iTunes. Connect your mobile device to your computer and press the Power and Home buttons at the same time. The user will see the phone screen go blank. So, the device will be displayed in the program. Next, you need to press the Shift key and the “Restore” button in iTunes.

If “iPhone 4” hangs on an apple, what should the owner of the device do? In most cases, it is quite difficult to eliminate such faults on your own. Experts recommend contacting a service center or a private workshop, since any technique requires a professional approach.

IPhone update

If the reboot procedure does not help, you should update the operating system in Recovery Mode. The method allows you to reinstall iOS without any changes to the data stored on the device. However, this method is only effective if the device is frozen due to a system update. If the problems are related to the jailbreak or the “stuffing” of the gadget, then this method will not help. To carry out the update procedure, the user will need a PC with the latest version of iTunes and a USB cable. Then you need to open the program on the computer and activate the recovery mode.

If “iPhone 6” freezes on an apple, what to do and how to reboot the device? The user will need to press the power button and volume control at the same time. After about 10 seconds, a logo will appear on the screen of the mobile device. ITunes on PC will display a notification that a gadget has been detected in recovery mode.

If “iPhone 7” hangs on an apple, what should the owners of the device do and how to return it to working condition? On all early iPhones, you can press and hold the Home button and the Power key. After the smartphone turns off, you need to hold “Home” and at the same time connect the mobile device using a USB cable to the PC. After a few seconds, the iTunes logo appears on the smartphone screen. This method will help users who are looking for an answer to the question of what to do. “iPhone” stuck on an apple. solving this problem by applying the specified method will reset the settings to the factory defaults. Beforehand, you should create backup copies of the necessary data.

READ  How to make WhatsApp like on iPhone

Main reasons

“iPhone” stuck on an apple: what to do? This question worries many owners of Apple mobile devices. The causes of the phenomenon can be system failures or software errors. A hardware malfunction of the smartphone is also possible. Next, we will consider the algorithm of actions in each of the listed cases.

If the owner of the gadget tried to install updates, and the mobile device is frozen, we can conclude that there is a system error. The operating system cannot reboot, so the smartphone reboots cyclically and displays the Apple logo. Sometimes this error occurs as a result of the phone running out of free space or running out of battery power when installing iOS updates.

iPhone stuck on an apple: what to do? Freezing reasons and methods of their elimination

Sometimes, iPhone users face various problems related to the functioning of the devices. Devices may stop showing signs of life after crashing or installing updates. “iPhone” stuck on an apple: what to do if its further use is impossible? In the article, we will consider in detail the causes of this phenomenon and possible ways to fix the problem.

Additional way

If the “iPhone” hangs on an apple, what if the above methods did not show a positive result? The user can check the installed tweaks for compatibility with a mobile device. He will need to put the device into safe mode. To do this, you need to turn off the gadget and wait a few seconds. Then you should click on the power button and go to the Cydia application, where you should remove the incompatible tweak.

If the user does not want to spend personal time restoring the work of the mobile device, you can use the qualified help of the wizards. Experts will approach the question of what to do professionally. “iPhone” stuck on an apple. they solved this problem many times.

Why iPhone blinks and won’t turn on?

If an apple blinks on the screen while charging your iPhone and the device won’t turn on, try performing a hard reset. disconnect the device from the charger for a couple of seconds, hold the power buttons and “Home” wait until an apple appears on the display

Why the apple burns and the iPhone does not turn on?

The main root cause of the problem, if an apple is on on the iPhone, the phone does not turn on, is a banal lack of energy for the smartphone, since the iPhone battery has a very low percentage of charge. In this case, after restarting the smartphone, it is quite possible to face such a situation.

What to do if iPhone 11 freezes while updating?

To do this, you need to simultaneously hold down the Home and Power buttons and hold them until the Apple logo appears on the screen. Depending on the severity of the failure, the frozen picture may change to the same icon for connecting to iTunes and this means that the new version of iOS, unfortunately, could not be installed correctly.

Why iPhone 5 turns on and off?

If the iPhone turns on and off immediately, then the reason for this may be: Deterioration of the battery. Its current voltage is simply not enough to initialize the device (it must be at least 2.5V), which is why when trying to start the OS, the device turns off.

What to do if iPhone 8 is frozen on an apple?

Smartphone freezes on apple while loading

  • On iPhone 8, 8 Plus, X, press and release the volume up button, then press and release the volume down button.
  • If you are using an iPhone 7 or 7 Plus, press and hold the Power and Volume Down buttons for ten seconds or longer until the Apple logo.

What to do iPhone stuck on an apple?

How to Hard Reset iPhone without Button

  • Press the volume up button and release it.
  • Then press the volume down button.
  • Hold the power button and hold it until the screen goes blank (the Apple logo disappears) and the device starts to reboot.

Why does iPhone restart on its own?

Sometimes the device also starts to work unstable if its memory is “clogged”. Clean up your iPhone and free up a few extra gigabytes. If iPhone, iPad or iPod Touch continues to reboot, back up the device and reset the operating system.

Force reboot

This is one of the most effective methods for getting out of a frozen state in most cases. We advise you to start resuscitation with him.

Here the algorithm depends on the device model.

  • If you have an earlier version of a popular smartphone, up to and including iPhone 6, then to start a forced reboot, you must simultaneously press the power button and Home (home). Hold the buttons for a few seconds until the gadget goes into reboot mode.
  • If a newer model of iPhone hangs on an apple and does not turn on, then the procedure is the same, but different keys will be functional. Here you need to hold down the power button and the volume rocker to decrease the sound.

If everything is done correctly and the device responded correctly to the start of the forced reboot, then the screen will first go out completely, and then it will show the logo again and the process will start over.

Recovery Mode. recovery mode

If the first method did not work and the gadget did not recover, it is worth trying the recovery mode. Usually it is used when it is necessary to reinstall the current OS while preserving the user’s content located on the device. Feel free to use this opportunity to reanimate a frozen device. Even if there is data that is not synchronized with the cloud storage on it, it will be completely safe.

There is one nuance here. The desired result will be only if the failure occurred due to the update of the current version of the operating system. For users of the system, jailbreak, as well as in the case of a technical malfunction, Recovery Mode will not help.

First, run iTunese on your computer, make sure you have the latest software, and enable recovery mode on your device. Honor’s smartphone model also follows here.

  • If the iPhone 7 freezes and does not turn on (the same applies to later versions of the gadget), then you must, as in the previous scenario: press and hold the power button and the volume control in the direction of decreasing the sound. As soon as the device turns off, hold down the volume button again and, while holding it, connect the device via a USB cable to the computer. Make sure the iTunes logo lights up on the screen and the cable appears. This signals that the connection was successful.
  • If the problem occurred in an early model or the iPhone 6 freezes and does not turn on, then the procedure will be slightly different. We press and hold the “Home” and “Power” buttons, wait for the shutdown. Press “Home” again, hold and connect the USB cable already connected to the PC. We are waiting for the logo to appear on the screen and a notification about the detection of the device in the working window of the program.

After pairing with the device, the program will ask what task should be performed in the current situation. In addition, the software will give recommendations on the choice. We press the “Update” command and wait for the completion of the process. As a result, the smartphone should return to working condition.

Problems with iPhone: the device hangs on the apple and does not turn on

Apple technology is of high quality, everyone knows that. Nevertheless, she gets into trouble. Most often, people who are not ready to put up with the manufacturer’s restrictions and use jailbreak, but sometimes even ordinary users. A more widespread problem is of the following nature: the iPhone hangs on the apple and does not turn on. Today we’ll talk about what to do and why a similar phenomenon occurs.

How to deal with the situation

So, the owner is in a panic: the iPhone is frozen, does not turn on, what to do is the first question to which he wants to know the answer. Therefore, for a start, we offer effective ways to bring your smartphone into working condition.

DFU reset

This is an option for the most extreme case. It implies the complete removal of all user data. If your device has valuable content that hasn’t been backed up, it’s best not to make hasty decisions.

The process runs in low-level recovery mode when the operating system does not boot. The transition to the DFU mode is performed on the device connected to the PC, according to the algorithms described above. The only difference is that you need to hold down the Home button or the volume key until iTunes informs you that the device is in recovery mode. In this state, the iPhone screen is completely black, nothing is displayed on it.

If the user knows for sure that a jailbreak, an installed tweak or other application is the cause of the hang, then this is the only way that can solve the problem.

There are situations when none of the above options helps. This means that the problem is of a hardware nature. It is necessary to contact a service center specializing in the repair of Apple appliances.

Possible reasons for freezing

Only a service center will be able to accurately diagnose the cause of iPhone failure. But we bring to your attention a list of the most frequent problems for which things do not move beyond a black screen with a corporate logo.

Malfunctions are of both hardware and software nature:

  • Failed to update the operating system. At the moment of updating the firmware version, the script is executed incorrectly and the smartphone stops running iOS.
  • This is often encountered by jailbreak users. After installing the next tweak, a device reboot is required, which ends up freezing on the logo.
  • If the iPhone has been disassembled, the power button may be damaged.
  • Malfunctions when charging the device (possible power surges), breakdown of the controller responsible for the process, problems with the battery. The latter is typical for smartphones, which are often subject to falls.
  • Screen freeze due to situational software error.
  • Problems with the motherboard. Usually, in this case, a complete freeze is preceded by short episodes, when the repeated shutdown of the device saves.
  • Memory failure. The storage chip needs to be checked.

These are all common reasons iPhone freezes on an apple and won’t turn on. The article contains the most effective methods of correcting the situation, unless it is of a hardware nature. We are waiting for everyone who still has questions in the comments. Share the article and stay with us.

READ  iPhone has turned off and the boot circle is spinning

DFU mode on iPhone and iPad

If the computer does not see the connected iPhone, you need to put it into a special Device Firmware Update mode or DFU mode. This is a special mode for updating and restoring firmware on Apple devices when standard methods do not help. It’s easy enough to enable Forced Recovery, but the process is slightly different on different iPhone models. How to enable DFU-mode on your device can be found on the official Apple technical support website.

If you did everything correctly, iTunes will automatically recognize the iPhone in recovery mode and a special notification will appear on the screen.

iTunes detects iPhone in DFU mode

Then follow the instructions on your computer screen. The process is very similar to the regular firmware described above.

iPhone hangs on the logo: causes and solutions

And so, if you are faced with a problem when your iPhone does not boot, hangs on an apple or asks to connect it to iTunes. firstly, do not panic. The problem is solvable in 90% of cases and is quite simple. You may even be able to restore the phone to work on your own.

First of all, pay attention to what preceded the iPhone freezing on the apple and no longer turning on. Perhaps the phone was being updated, perhaps it was dropped on the floor or liquid got on it. All of these can affect the performance of your iPhone and lead to the problems described above.

The main reasons for iPhone freezing on an apple:

  • “Crooked” installed firmware;
  • Installed custom firmware. jailbreak;
  • Defective iPhone battery;
  • Failure of some of the elements of the motherboard: flash memory, processor, modem.

Almost all of these problems are solvable and repairable, except for the processor blade. It cannot be replaced with a new one and is very difficult to reball. In this case, it will be quite problematic to repair a smartphone. In other cases, when the problem concerns software, restarting the device or flashing the iPhone almost always helps. If the problem concerns hardware, then you will probably have to seek help from a service center, for example, fixlab.com.ua, which specializes in complex repairs of motherboards for smartphones, tablets and laptops.

Self-service iPhone recovery via iTunes

“Hard” rebooting different iPhone models

First, try to force restart your smartphone. As a result, all non-critical errors will be fixed, the cache memory of the device will be cleared and your smartphone should boot normally. You can see how this is done on different iPhone models in the picture above or you can read in our article on this topic.

If the reboot does not help and the smartphone still hangs on the apple, you need to go to more radical methods. flashing the iPhone. Follow the instructions below exactly and you will probably be able to independently get the iPhone out of the state when it hangs on an apple or constantly reboots.

  • To get started, download and install the latest version of iTunes on your computer.
  • After that, use the cable to connect the iPhone that “hangs” on the apple. It should be automatically detected by the system and iTunes.
  • Then follow the instructions and prompts of the iTunes program to “Update” or “Restore” iPhone. iTunes will independently select and download the latest firmware version for your iPhone model and install it.

IMPORTANT.

If you choose “Update iPhone”, then all personal information will be SAVED on it. But updating the iPhone that hangs on the apple is not always possible. Sometimes you have to perform “Restore iPhone” which leads to the complete destruction of all information on the iPhone. You can only recover deleted information if you have backed up iPhone before.

  • If everything went right and without interruptions, then your iPhone will turn on with the updated firmware and you can continue to use your favorite gadget.
  • If an error appears during the recovery or update process, we recommend contacting one of our service centers. Where comprehensive and always free diagnostics of your iPhone will be carried out. As soon as possible, we will establish the true problem and determine the best ways to solve it by agreeing on the timing and cost of repairs with you.

    IPhone Motherboard Repair

    If none of the above methods helped you, then the problem is clearly deeper than a software failure and you need to contact a specialist for qualified iPhone repair in Kiev.

    Fix iPhone Stuck on Update Bar/Loading Screen

    IN service center FixLab on Demeevka you are always waiting for a polite and competent staff who will fully advise you on the repair of your Apple smartphone. Thanks to our experience and the availability of modern equipment and a large warehouse of spare parts, we carry out 70% of repairs on the same day.

    What Do I Do if My iPhone Stuck while Updating to iOS14

    You can read reviews about our work on Google maps or on social networks. Regarding the repair of iPhones that freeze when loading and which are not helped by flashing, then often the case lies in the broken contact between the motherboard and the elements installed on it, usually flash memory or a modem. As a result of falls or other mechanical influences, the factory soldering may be broken, and there may be no contact in the right places. This leads to the fact that the system cannot boot to the end.

    FixLab service center engineers are competent enough to identify and fix most of the malfunctions in your smartphones and tablets. For example, in the case of a “dump” flash memory, we will reball a flash on an iPhone in just one working day. And in a day, a fully working and serviceable smartphone will be in your hands!

    IPhone hardware problems

    Let’s start with the unpleasant. If your iPhone was prone to drops, shocks, contact with water or poor-quality repairs, after which, in fact, a problem appeared in the form of a permanent apple on the screen. you need to contact a service center.

    The cause of the breakdown may be a faulty / outgoing cable, damage to the iPhone processor or its other components. Apple iLab Service Center Wizard will help you fix such problems.

    What to do if iPhone stuck on apple and won’t turn on

    Is your iPhone stuck on an apple and you don’t know what to do? We have prepared instructions to help you get out of this unpleasant situation.

    A white / black screen and an apple with a constant reboot is probably one of the most frightening pictures for an iPhone owner. Although, if you understand and know how to act in this situation, then you will understand that everything is not as bad as it seems.

    Follow our instructions and you will undoubtedly be able to fix the problem with the frozen apple on the screen of your device.

    Method 1 Force reboot

    • Hold down the Home button and keep it pressed for 10 seconds
    • After the screen goes out, press the Power button again until the Apple logo lights up.
    • The phone will restart on its own and the logo will disappear if there was no serious system damage on the device.

    For iPhone with TouchID (iPhone 7 to iPhone 8)

    • Press on Power and volume button.
    • Everything goes out, the Apple logo appears again.
    • Then turn on the device again.

    For iPhone with FaceID (and iPhone SE (2020)):

    • Click on the Volume up button.
    • Then press the volume down button.
    • After that, hold down Power for 10 seconds.
    • iPhone should restart.

    Please note that you will need to enter your device PIN to continue using it.

    Why iPhone freezes on apple

    There are many reasons why your iPhone can turn into a brick with an eternally rebooting apple.

    Some of the most common are:

    • Incorrect iOS update
    • Error in the system application
    • Low battery
    • Poorly performed jailbreak process
    • Processor problems
    • Poor repair
    • Falls / hits
    • Contact with moisture
    • Installing beta versions of iOS
    • Overheating / overcooling iPhone

    Next, we will take a closer look at the main reasons that can lead to the fact that your iPhone is constantly restarting and how to fix this problem without harm to your iPhone.!

    Method 3 Enter DFU mode

    Using this method will delete all information from the iPhone. If you’ve already created backups, you can download them later from iCloud.

    DFU or device firmware update allows you to connect to iTunes and bypass automatic updates. This allows you to change the iPhone firmware to any version.

    We wrote about this method for iPhone X / XS / 11 earlier. Using this mode, you can restore the firmware of the device.

    How to enter DFU mode on iPhone with TouchID (physical button):

    • Connect your iPhone to PC with iTunes.
    • Press and hold the Home and Power buttons at the same time. You need to hold for ten seconds.
    • Then stop holding Power.
    • Keep the Home button pressed for another 10 seconds.
    • If your screen is blank, your iPhone is in DFU mode.
    • Now, when you launch iTunes, you should receive the following message: “iPhone has detected iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes “.
    • You can restore your phone to factory settings or upload a backup.

    To exit this state: you need to hold down Home and the power button.

    How to enter DFU mode on iPhone with TouchID (touch button. From iPhone 7/7 Plus):

    • Connect your iPhone to PC with iTunes.
    • Press and hold the Volume Down and Power buttons at the same time. You need to hold for ten seconds.
    • Then stop holding Power.
    • Keep the Volume Down button pressed for another 10 seconds.
    • If your screen is completely blank, your iPhone is in DFU mode.

    To get out of this state: you need to hold down Power and Volume Down.

    • Connect your iPhone to PC with iTunes.
    • Hold down the Volume UP button for a few seconds. Letting go.
    • Then press the volume down button. Letting go.
    • Then click on Power until the screen goes out.
    • When the screen goes out completely, press the volume down button again.
    • We hold until the screen turns off completely and this will mean that your phone is in DFU mode.

    The Apple logo should not be in DFU mode! If it appears, then you did something wrong. Repeat your steps one more time.

    You can get out of this state if: press Volume Down and Power.

    IOS / app or jailbreak issues

    Apple has highlighted the need for users to responsibly update their iPhone many times.

    • Have enough memory on your device to update;
    • Create a backup before updating;
    • Charge your iPhone at least 50% or put it on charge;
    • Provide a stable Wi-Fi connection;
    • When starting the update, you cannot restart or interrupt the download.

    Many users ignore these facts, install low-quality beta, carry out the jailbreak process, and then suffer from the fact that the iPhone freezes on the “apple” and does not want to work. I do not recommend doing this.

    Hypothermia or overheating

    With hypothermia or overheating of the iPhone, sometimes, but still there are cases that the device freezes on an apple and refuses to boot.

    In this case, you need to give the iPhone time to “recover”. The main thing for the device is to provide it with a place at room temperature, away from open sunlight or freezing temperatures.

    READ  How to view browser history on iPhone

    But we do not recommend trying to warm or cool the iPhone using aids.

    What to do if iPhone freezes while updating

    Despite the seeming glitchiness of the iPhone, iPad and iPod touch, even Apple mobile devices can freeze when updating, especially if you follow the development of new versions of iOS and always install the latest tested builds for yourself. In this guide, we will tell you what to do if the iPhone freezes during the update and how to bring the device back to life on our own.

    An iPhone, iPad or iPod touch freezing when installing a new version of iOS, or rolling back to one of the available previous builds, can be caused by a number of reasons. At the same time, the saddest thing is that the user, for his part, can influence the installation process to a minimum. he just needs not to disconnect the device and not disconnect it from the computer if the firmware is installed via iTunes.

    But after the failure happened to the owner of the mobile device, you can perform a number of actions aimed at saving the gadget in distress. It is recommended to start with the simplest.

    What to do if iPhone freezes while updating. force restart

    We are considering a situation where the iPhone is frozen and the smartphone does not make any calls to action, such as the requirement to connect to iTunes. In cases where the image on the device screen froze, a banal forced reboot can help.

    To do this, you need to simultaneously hold down the Home and Power buttons and hold them until the Apple logo appears on the screen. Depending on the severity of the failure, the frozen picture may change to the same icon for connecting to iTunes and this means that the new version of iOS, unfortunately, could not be installed correctly.

    What to do if iPhone freezes while updating. restore smartphone via iTunes

    If a forced restart did not help fix the problem, or a notification appeared on the screen about the need to restore the smartphone via iTunes, we have no other choice but to connect the device to the computer for subsequent recovery.

    The recovery process is straightforward:

    Connect your iPhone, iPad or iPod touch to your computer and launch iTunes

    If the device has not yet entered recovery mode, hold down the Home and Power buttons until the iTunes icon appears on the screen (as in the image below)

    Click on the “Update” button, confirm the start of the operation and wait for it to end

    Important: If you update, you will try to reinstall iOS without losing data. If you choose to restore, then all content and settings will be erased.

    Note: the process can take quite a long time, since initially iTunes will download the required version of iOS from Apple servers.

    Once the restore process is complete, the latest available version of iOS will be installed on your iPhone, iPad or iPod touch.

    What to do if iPhone is frozen?

    The iPhone is more than just a smartphone. This is a full-fledged computer, packed in a minimalist case and equipped with a high-resolution (retina) screen. Controlling your iPhone is a pleasure. “Yabloko” opens access to high-speed Internet, opens the owner to the world of colorful games and multifunctional applications. But even such a great device has its drawbacks. for a number of reasons, the device may “hang”, responding inadequately to commands. Let’s list some of them:

    • battery problem;
    • device freeze;
    • damage to the integrity of the display.
    • the phone does not charge at all;
    • charging is in progress, but the phone is not charging;
    • the battery is charged for a short time;
    • the phone does not accurately show the battery level.
    • ingress of moisture into the apparatus;
    • charging the phone through non-original chargers, which subsequently has a bad effect on the quality of the battery charge;
    • charging is carried out through car chargers, which sometimes leads to a malfunction of the battery.

    IPhone stuck

    Every owner of mobile devices had to deal with malfunctions in the work of their favorite device. There are several ways to get an iPhone out of a frozen state.

    The first method is the most harmless, because it reboots the phone normally. To do this, press and hold the power off button for a while. As soon as the message “turn off” appears on the screen, you need to slide your finger from left to right on it, but do not lift your finger. This gesture is called “swipe” from the English word “swipe” ̶ hold without lifting. After these manipulations, the phone will reboot.

    What if your email friend doesn’t respond to touching the screen or pressing buttons? There is a forced reboot procedure and this can be done from any state of the smartphone. Simply hold down the two mechanical buttons “Home” and “Power” at the same time. after 10 seconds, the iPhone screen will turn off. Then release the buttons. The Apple logo should appear. If the last action did not happen, press the power button of the device. The device will start working in standard mode.

    It is recommended to use this reboot method only as a last resort, if other methods have exhausted themselves.

    The last option you can use to restart your iPhone is by using the Assistive Touch feature. It is worth noting that this method will only be effective if iOS is operating normally and responds to touching the sensor.

    The creators of the device have foreseen that mechanical buttons can fail, so they have developed duplicate operations that can be performed using a touch screen. Assistive Touch allows you to completely switch control of the device using the sensor. To enable it, you need to go to “Settings”, then “General” and “Universal Access”. Scrolling through the list of functions, in the section “Physiology” and “Motor” you will find the desired item. Turn it on. A semi-transparent white round button appears on the device screen. By tapping on it, you will open the Assistive Touch menu, which consists of 4 items. You need the item “Apparatus”. click on it. Then, tap and hold your finger on the Screen Lock button. The Shutdown and Cancel buttons will pop up. Next, do everything as in the first method: swipe to the right to turn off the phone.

    Broken display

    There may be such a problem that during the operation of the iPhone, its screen crashed or cracked, which already directly affects the speed of the device. The most important thing in this problem is time. The longer the device is in a broken state, the more you will have to invest in repairing it. In this situation, the only correct solution would be to contact the service center, where the screen and the filling of the electronic sufferer will be quickly and efficiently replaced. Apple’s licensed service centers work only with original parts and similar dealerships are located throughout the country, so the for repairs will pleasantly surprise you. Importantly, after the repair and elimination of defects, the owner is issued a full warranty for the entire device.

    What to do, iPhone stuck on apple after iOS 12/11/10 update

    Despite the seeming glitchiness of the iPhone, iPad and iPod touch, even Apple mobile devices can freeze after an update. iPhone stuck on apple and won’t turn on, this problem is one of the most common and annoying problems encountered in Apple iPhones. However, the iPhone often freezes after booting or updating, causing the device to become unresponsive and display the Apple logo on its screen. In this article, we offer you 4 ways to fix this problem for free if iPhone freezes after iOS 12/11 // 10 update.

    Put iPhone into Recovery Mode with Tenoshare Tenorshare ReiBoot

    With Tenorshare ReiBoot, it’s easy and free to solve this problem in 3 steps.

    First, download and host Tenorshare ReiBoot on your computer or Mac. Connect iPhone / iPad / iPod touch to your computer using USB cables. Then press the button “Enter the Recovery Mode”.

    If the device entered the recovery mode, then the “Exit Recovery Mode” button appeared. Click this button to exit recovery mode and restart your device.

    After exiting recovery mode, your device reboots successfully.

    Recovery in iTunes (data loss)

    • Connect the iPhone to the computer using a cable and launch iTunes, then hold down the Home and Power buttons on the device and hold them for 12 seconds.
    • Release the Power button, but hold the Home button until the information appears on the computer screen that the device has been detected. After that click “restore”.

    Note: Put iPhone in DFU mode may lose all your data, so you need to back up your data before using this method.

    Fix operating system with Tenorshare ReiBoot (no data loss)

    If the above methods did not help solve the problem, it would be something wrong with the hardware, no need to worry, then you can try the methods below, and these final solutions will not only solve the freezing on the white logo, but also solve the freezing problems in recovery mode, on a cyclic restart, connection to iTunes on the screen, and other freezes on iPhone / iPad / iPod without data loss.

      Click the “Solve All Freezes” button and then you get to the recovery page, click “Fix it now”.

    Now you will be “Download Firmware Package” interface, click “Download” button to download the firmware package online.

    After the firmware package has been successfully downloaded, click the “Start Repair” button to start the system restore.

    Table of Contents

    | Contacts | Content | RSS