It is difficult to hear the interlocutor on the iPhone 7

Iphone 6s is hard to hear the interlocutor reasons

Many people often complain about the poor hearing of the interlocutor on the iPhone 6s (iPhone 6c). A fairly common reason for this is a speaker malfunction resulting from mechanical damage. But sometimes the interlocutor is hard to hear for an elementary reason. the volume of the conversation is reduced to a minimum in the smartphone.

In some situations, the quiet sound of the interlocutor appears suddenly. When doing this, consider whether you have recently connected headphones. Insert the headphone plug again and pull it out sharply. If such manipulation did not help, then most likely you will have to change the audio connector or the top cable.

The bad sound of the interlocutor on the iPhone 6s (iPhone 6c) can also be provoked by extraneous software. In this case, it is worth removing it and restarting the device. These steps will usually fix the problem.

The problem may be caused by the fact that the sound lever itself is in the mute position. In this case, the owner will see a red mark on the lever. It is worth switching it to another position.

To solve this problem, you can also clean the speaker hole (maybe dirt, dust got there). If you tried everything, but the problem still remains, then you need to resort to the help of the specialists of our Apple-SAPPHIRE service center.

We strongly do not recommend performing any manipulations with the smartphone on your own, because ill-considered actions can affect its operation.

Many users make a serious mistake. waiting for the phone to fix itself. But looking at our price list, you will be convinced that we provide services at affordable and quality repairs will not hit your

Shipping films and covers

Another reason: transport film. After buying a new smartphone, there is always a film on the screen that people for some reason do not remove. They do this ostensibly in order to preserve a beautiful appearance, but this film can simply block the speaker, which will make the interlocutor hard to hear.

Covers can also block sound. They usually have a speaker hole, but sometimes it gets clogged with debris. Try cleaning it and test your phone again.

Add volume

Let’s start with the banal. Inexperienced users, when talking, simply make the sound of the speaker quieter by involuntarily pressing the volume down button on the side panel. In this case, you don’t even need to open the “iPhone 6” settings. To set the maximum volume, you need to call someone and increase the volume with the side keys during the call.

Judging by the messages on various forums, a simple action also helps many users: insert and remove the headset. If it helps, then that’s great, but if not, then let’s move on.

Why is it hard to hear the interlocutor on the iPhone 6 and how to fix

The real story that happened to my phone. One fine day, while talking on the phone, I noticed that the interlocutor was hard to hear on the 6 iPhone. All this did not happen immediately, but I did not pay attention to the symptoms of the degrading volume of the interlocutor‘s sound.

And then one fine day, talking on the phone with different interlocutors, I noticed that the sound of a conversation, such as the person’s butt, is far from the phone. To begin with, information was collected about possible malfunctions and remedies.

The first common reason “it is hard to hear the interlocutor on the iPhone 6” is the mesh that covers the speaker. The fact is that the user himself, without noticing it when using a smartphone, gradually clogs the microphone grid with microscopic dirt and is modern because of this, the sound becomes quiet.

The first step is to clean the mesh yourself. To do this, you need a small brush with a hard bristle and a strong drink of 70 degrees. We wet the brush so that it is damp but not wet and gently clean the mesh. And that’s it! Our phone works like new.

Modern telephones have not been used for their intended purpose for a long time. Now it is a music player, video and photo camera, GPS-navigator, etc. For conversations, of course, phones are used, but less often than before. But even if the interlocutor is hard to hear on the “iPhone 6”, then this is a reason for the owner to worry. Such expensive gadgets from Apple should work properly.

Unfortunately, not a single phone is immune from this. Even the new flagships iPhone 7 and 7 Plus are at risk.

We clean the speaker mesh

If the mesh that covers the membrane and serves as some kind of protection from debris could become clogged, then to clean it, you need to use a cotton swab with alcohol or a toothbrush. Also try blowing it out and taking out the trash.

If cleaning helped, then that’s great. True, dirt accumulates not only outside, but also inside. Therefore, sometimes the phone needs to be disassembled in order to clean the debris from under the mesh.

For disassembly, special star screwdrivers are used. Most likely, you do not have them, so you will have to contact the service center. If you have the necessary tool, then you can try to remove the cover yourself. But do it carefully so as not to hurt or tear off the train.

Did it help? If not, then we will look for the reason.

Looking for a reason

It is important to remember, after which it became difficult to hear the interlocutor on the “iPhone 6”. For example, after the gadget fell out of your hands or you threw a glass of water on it. It is possible that sand got into the speaker after relaxing on the beach. Anything could disrupt its work, but most often it is the owner who is to blame. The speakers themselves rarely deteriorate. After all, this is a simple module in which there is really nothing to break.

Unfortunately, only a few users can repair the iPhone 6 on their own. It is impossible to do this without special screwdrivers, so the simplest laconic advice is to take the phone to the service center.

over, if you remember exactly that the speaker began to work worse after a fall, then you shouldn’t be in a hurry. However, if you are sure (or at least there is such a possibility) that you identified a bad sound on the “iPhone 6” after water got inside the case, then you must immediately turn off the phone, remove the battery and take the device to a service center. In this case, this is the minimum that you can do useful. The maximum is if you also dry the phone with a hairdryer for at least 5-10 minutes. Surely during this time, the water will evaporate from the inside. After that, take the phone to the master anyway.

If it turns out that water got inside and closed the contacts, then you will have to put a new speaker on the “iPhone 6”. Usually it is inexpensive, but with the condition of payment for the work, it will not be so cheap. Also, it cannot be ruled out that during the fall, some contact or train did not come off. In this case, repairs will not be expensive.

Could there be a software reason?

Can. The iOS operating system itself is great. It is well optimized, easy to operate and constantly updated. But nowadays many users have popular jailbreaks. These are special programs installed on iOS. In other words. firmware.

Yes, they open up a lot of possibilities for users, including the ability to install cool free programs that would have to pay money without jailbreak. But firmware is unofficial software, and no one is responsible for their performance. No need to be surprised that after some jailbreak it will be hard to hear the interlocutor on the “iPhone 6”. And although the problem in the software is solved quite easily, a similar feature takes place.

So it is not recommended, unless absolutely necessary, to install all sorts of complex software that can harm the system. It’s good if the problem with the speaker is of a software nature. In this case, “iPhone 6” repair is not required at all. It will be enough just to install the latest official software via iTunes.

By the way, it is extremely rare that there can be a problem even in the official firmware. There have been times when new versions of Apple’s software only hurt the phone. Therefore, you can try to “roll back” to the previous version of the software. It is unlikely that this will solve the problem, but it is worth trying.

Malfunction with software

If the speaker is quiet, the problem lies in the OS of the device. If visual inspection has not yielded results, then restoring the device is the next step to solving the problem. How OS recovery works?

  • Using a cable, connect the device to your computer, launch iTunes and create a copy of the gadget files. When restoring the software, contacts, music and photos will be deleted from the phone, so it is important to create a backup.
  • Run the firmware using the “Restore” button.

iTunes will find a suitable IOS and install it on the iPhone automatically. To speed up the process, if necessary, you can use a previously downloaded firmware file. Hold down the “Shift” key while specifying the path to the file, and then click “Restore”. Often on the iPhone 7, the interlocutor is hard to hear during a conversation due to software problems.

If it is not possible to reflash the phone on your own, the service center employees will help. They more accurately diagnose the cause of low audibility and install, if necessary, new software. We will talk about the service center in more detail a little later.

Cleaning the speaker mesh

The speaker mesh is the most clogged on older models. That is why, if the interlocutor is hard to hear on your iPhone 5S, carry out a complete cleaning with a dry, non-sharp object. The main thing is not to bring moisture inside the speaker (applies to iPhone 5S, 6) and do not pierce it. Some users use a vacuum cleaner at minimum power for cleaning, but those. Apple Support does not recommend this procedure to avoid damaging the device.

Adding volume

A standard feature worth trying out. Change the volume using the buttons on the side panel. It is also worth watching the sound indicator that appears on the smartphone screen.

If all else fails

The methods did not bring the desired result? On iPhone 6, you can’t hear the interlocutor and the call is possible only through the speakerphone? The problem lies in the internal components of the mobile phone.

READ  How to Record iPhone 10 Screen

Reasons for poor hearing on iPhone

If this is not the first time you are faced with the fact that it is hard to hear the interlocutor on the iPhone 7 during a conversation, try to find the reason yourself. Make sure that:

  • The microphone is located at a normal distance from the sound source. The reason is trivial, but pay attention to it first. Smartphone users, using the speakerphone during a call, hold the phone in such a way that the speaker is too far away. Therefore, poor audibility of the subscriber arises.
  • The case does not obstruct the microphone of the device. The non-original protective shell becomes a barrier between the user and the microphone. By the way, not only the cover acts as a physical barrier. Falling a mobile phone, as well as mechanical stress on the internal parts of the upper loop, harm the normal operation of the smartphone.
  • Upper loop failure. If the loop is completely broken, the volume control and mute buttons on the device will not work normally. By the way, it is because of the malfunction of the loop that the interlocutor is hard to hear on the iPhone 5S.

iPhone 7 cannot hear the interlocutor

Dropping or getting wet is a common cause of speaker breakage. As a result, the interlocutor is hard to hear on the iPhone 6 and other models. Speaker problems are observed not only on the iPhone 6, 7, but also on earlier models. First, check the link indicator of the device. If the signal level is normal, and the sound is quiet, the malfunction is hidden in the phone itself.

Shipping film and covers

Didn’t changing the position of the volume buttons improve the sound quality? Can’t hear another caller on iPhone 7? If we are talking about a transport film, then you may have forgotten to remove it from your mobile phone immediately after purchase. The film protects the device before purchase, but after purchase it does not make sense and prevents the speaker from working in normal mode.

Methods for improving hearing

The first way to solve the problem is to restore the operation of the IOS OS. In 99% of cases, if a new version is installed incorrectly or a jailbreak is implemented, there are problems with poor audibility on the iPhone.

Clean up applications from your mobile device that have been installed in the last days or weeks. Even popular and seemingly safe applications like WhatsApp, Telegram and Instagram affect the speaker’s performance due to unforeseen bugs and errors.

Another commonplace, but effective step is to reboot the smartphone. Turn off the device and then restart it using the side button (on iPhone 6,7) or top (iPhone 5S) and the Home button.

Still hard to hear the interlocutor on the iPhone? Then consider other methods of solving the problem.

If all else fails

The methods did not bring the desired result? On iPhone 6, you can’t hear the interlocutor and the call is possible only through the speakerphone? The problem lies in the internal components of the mobile phone.

Cleaning the speaker mesh

The speaker mesh is the most clogged on older models. That is why, if the interlocutor is hard to hear on your iPhone 5S, carry out a complete cleaning with a dry, non-sharp object. The main thing is not to bring moisture inside the speaker (applies to iPhone 5S, 6) and do not pierce it. Some users use a vacuum cleaner at minimum power for cleaning, but those. Apple Support does not recommend this procedure to avoid damaging the device.

How do iPhone speakers work??

Before you begin to describe the malfunctions and answer the question. Why is it hard to hear the interlocutor of the iPhone during a conversation and what to do in such a situation, you need to study the smartphone device and divide the breakdown into mechanical and software.

The iPhone has two speakers, the lower speaker, which is responsible for speakerphone, music playback and call sound, and the upper earpiece, which is responsible for hearing the interlocutor’s voice on the iPhone.

What to do if the interlocutor is hard to hear on the iPhone?

From the above possible breakdowns and their symptoms, it is extremely difficult to correctly diagnose the place and cause of the breakdown. If you have little experience, it is better to start the test by checking the volume level in the settings and the silent mode key.

The best and simplest answer to the question. why you can’t hear the interlocutor of the iPhone, is to come to the PlanetiPhone SC for free iPhone diagnostics.

Software glitches and errors

Now we will analyze software faults that we can fix on our own without resorting to the help of the service.

It is worth remembering if you have connected speakers or headphones via Bluetooth? iOS may not properly disconnect the headset and think that it is still connected to the phone. Just go to settings and turn it off again.

On the iPhone, the interlocutor is hard to hear due to the use of third-party software. Remember what you installed before you discovered the problem. Try deleting them and rebooting. Hold down the Power and Home keys.

If the sound does not always disappear, but only in periods, it may be a glitch in the iPhone operating system. Try updating your firmware.

The iPhone has a quiet speaker. why the sound is dull

Quite often, the owners of Apple smartphones turn to me with a complaint that the iPhone speaker has become quieter, the interlocutor has become hard to hear and you have to strain your hearing significantly. In a noisy street, this becomes terribly annoying. Skeptics immediately start scolding Apple and the iPhone, complaining about the Chinese assembly and the high cost. In fact, in most cases, the reasons why the iPhone has a quiet speaker and a dull sound lie not in the device itself, but in its accessories. But first things first!

So, if all of a sudden your iPhone speaker starts to work quietly, start by simply restarting it. After that, call one of your friends and during a conversation, adjust the speaker volume with the buttons from minimum to maximum and back several times. This helps in cases where sound problems are associated with a simple malfunction of the device.

The second, fairly common case is a crookedly glued protective film or glass.

But here, as a rule, the problem pops up immediately after you have glued the protective accessory to the device. Accordingly, you need to re-glue the film or glass correctly and everything will be fine.

It also happens that the iPhone has become quieter due to the case, which has warped over time and partially covered the speaker. Again, it’s quite simple to check it. just remove the cover and make a call.

Stages of repair in “PlanetiPhone”.

  • – Further, we announce all the faults found, the time it will take to eliminate them and the final price. (The price already includes the price of the part and the work of the master! No extra charges after repair!)
  • – The specified procedures and full testing of the smartphone are performed.
  • – You pay for the services and you are given a fully refurbished iPhone, a warranty and a discount card.

Get a discount now just by filling out an application on the website.

Malfunction with software

If the speaker is quiet, the problem lies in the OS of the device. If visual inspection has not yielded results, then restoring the device is the next step to solving the problem. How OS recovery works?

  • Using a cable, connect the device to your computer, launch iTunes and create a copy of the gadget files. When restoring the software, contacts, music and photos will be deleted from the phone, so it is important to create a backup.
  • Run the firmware using the “Restore” button.

iTunes will find a suitable IOS and install it on the iPhone automatically. To speed up the process, if necessary, you can use a previously downloaded firmware file. Hold down the “Shift” key while specifying the path to the file, and then click “Restore“. Often on the iPhone 7, the interlocutor is hard to hear during a conversation due to software problems.

If it is not possible to reflash the phone on your own, the service center employees will help. They more accurately diagnose the cause of low audibility and install, if necessary, new software. We will talk about the service center in more detail a little later.

IPhone 7 processor hiss

And so, the trouble came from where it was definitely not expected.

New A10 Fusion processor found in iPhone 7 and iPhone 7 Plus turns out to hiss and make different sounds under heavy load.

What is heavy load? Games, watching videos online, testing in various programs, etc.

over, as it turns out, this very processor (to be more precise, transistors or whatever happens on it) produces sounds on almost any iPhone 7. Somewhere quieter, somewhere louder, but in general. the “seven” hisses and this fact.

But what is more interesting. if not normal, then close to it. Almost any iPhone makes noise in this way, it’s just that they didn’t pay attention to it before. And then the hysteria started 🙂

Of course, when we say that any iPhone makes noise in this way, we mean a quiet sound. If the sounds are strong, then it is better to turn off the device and return it under warranty, this is an unambiguous marriage. Apple knows about this and such iPhone 7 can be easily replaced with new ones.

Factory defects in the iPhone 7 and iPhone 7 Plus. all the disadvantages!

Hello everyone! We continue and today we are already finishing (for the next year. this is almost for sure) the topic of factory marriage in iPhones. Next in line we have a novelty. the iPhone 7 and its larger brother, the iPhone 7 Plus. Did Apple engineers manage to make a wonderful gadget, without any defects? Now let’s see and find out

Important note. Since the devices are new and have only recently appeared on sale, the article will be supplemented as information becomes available about new identified defects in the seventh iPhone. And you, too, can participate in this. Why not? If you have something to add or you yourself are faced with any common marriage in the iPhone 7 (Plus), then do not be lazy and be sure to write in the comments.

READ  How to connect Huawei headphones to iPhone

All finished with the introduction. Let’s move on to the most important thing. defects. Begin!

Speaker problem. the interlocutor is hard to hear in the iPhone 7

In the comments to this article (thank you!), And on other various resources, many users note the fact that the sound of the spoken speaker in the iPhone 7 is a little unusual. “like from a barrel”.

Considering the fact that some people are already handing over their “sevens” with a similar problem to the service (and they change them there!), We conclude that the iPhone 7 has a new marriage:

If possible, be sure to check when buying!

True, there are two nuances that you need to remember before running to the service. If your interlocutor is hard to hear on the iPhone 7, then:

  • First, be sure to change the SIM card, especially if you have it for a long time and for Nano SIM it was cut yourself. Well, or just check with another, “normal” SIM card.
  • The iPhone 7 has moisture protection and such a dull sound during a call may be due to the presence of special protective membranes. Which, on the one hand, prevent moisture from getting inside the case, and on the other hand, slightly distort the sound during a conversation.

Everything seems to be. At the moment, there is no other known factory defect in the iPhone 7. an ideal smartphone 🙂 Of course, over time, defects will appear, so where can we go without it. But for now. like this.

I can’t hear the interlocutor on iPhone 11 / X (s / r) / 8/7/6

Now we will figure out the reasons why you cannot hear the interlocutor on your iPhone through the auditory / voice / conversational speaker (not to be confused with the polyphonic one). However, we recommend contacting the service center for qualified assistance if the breakdown is of a hardware nature.

This article applies to all iPhone 11 / XS (r) / X / 8/7/6 and Plus models on iOS 13. Older versions may have different or missing menu items and hardware support specified in the article.

The main causes of the problem

Have you noticed that during some calls on the iPhone the interlocutor is not heard? This problem is very common among iPhone owners.

If, after completing all the methods, you still do not hear the interlocutor during a telephone conversation, then the problem is related to the hardware part. Professionals from the service center will help you solve it.

Clean the receiver

The iPhone receiver may not work properly if it is dirty or clogged. Make sure that the receiver is not blocked by anything, such as a protective film or case, and also check that the receiver grille is not clogged. In the latter case, it is necessary to brush it with a clean dry brush with soft bristles.

Advice! If you just bought an iPhone, remove the plastic films from the covers of your smartphone.

Force restart your iPhone

Quite often, the problem with poor performance of the iPhone receiver is due to a software bug. Perform a forced restart of the smartphone by holding down the Power and Home buttons (the volume down button on the iPhone 7/7 Plus) in order to reset errors.

I can’t hear the interlocutor on the phone on the iPhone. what to do

Have you noticed that with some calls on your iPhone you can’t hear the interlocutor? This problem is quite common among owners of Apple smartphones. Its cause can be either an iOS error or a malfunction or contamination of the iPhone receiver. What to do in any of these cases is described in this instruction.

Restore iPhone

An even more powerful way to fix a software bug is to restore your iPhone. For this:

difficult, hear, interlocutor, iphone

Note: You must have an up-to-date version of iTunes installed on your computer. You can update iTunes on Mac by going to the Updates tab in the Mac App Store, on Windows from Help → Updates. If iTunes is not installed on your computer, you can download the latest version on the official Apple website.

Download the latest iOS version for your iPhone on this website.

Connect your iPhone to your computer and then put your smartphone into recovery mode. To do this, simultaneously hold down the Home and Power buttons for 10 seconds, then release the Power button, but continue to hold the Home button for 6-9 seconds. If you did everything correctly, iTunes will report iPhone detection in recovery mode.

Note: Putting iPhone 7 and iPhone 7 Plus into recovery mode is slightly different. Instead of the Home button, you must hold down the Volume Down button.

Hold down the Shift key and hold it down and click “Restore” in iTunes. In the window that opens, select the previously downloaded firmware file.

Confirm the start of the recovery procedure.

After the restoration is completed, perform the initial setup of the iPhone, and then check if the error with the incorrect operation of the device receiver has been fixed.

Check volume and connections

Initially, you need to check the basic settings. First, make sure the call volume is not set to the minimum. During a call, adjust the volume using the control buttons. the screen should display the volume indicator and its current state.

Secondly, make sure that no headset is connected to the iPhone, as there will be no sound from the smartphone’s receiver in this case. Check that nothing is plugged into the headphone jack or dock jack, and that the iPhone is not stuck in headset mode. In addition, go to Settings → Bluetooth and turn off Bluetooth.

Contact the service center for help

If none of the above methods helped, in your case the problem is hardware. Only the specialists of the service center will be able to help solve it.

Please rate 5 stars at the bottom of the article if you like this topic. Subscribe to us Telegram. In contact with. Instagram YouTube.

Can’t hear the interlocutor iPhone

No one today will argue with the fact that mobile has long been no longer used only for its intended purpose. And how can you use it exclusively for conversations, if this new smartphone has a huge variety of functions? And even more so a smartphone from Apple!

But be that as it may, the owners of such high-tech devices often face such a problem as hard to hear the interlocutor iPhone (“iPhone“). This causes panic, and the user immediately thinks about what to do. over, this can happen with any model, and the latest generation smartphones are no exception.

So, what to do if it is hard to hear the interlocutor iPhone (“iPhone”)

First of all, you need to think and try to remember what could have caused this problem at all. In most cases, this problem occurs as a result of mechanical damage or water ingress into the cabinet, which has caused malfunction of the top speaker. The main reason for these breakdowns is the owner’s careless handling of the mobile.

It’s not a secret for anyone that it is impossible to disassemble (or, for example, dry if moisture gets in) on your own, when the interlocutor is hard to hear on the iPhone (“iPhone”), and the only right decision is to refer the smartphone to the master. And if you can take your time with mechanical damage to the phone, then if liquid gets in, you must immediately take the phone to the Apple-SAPPHIRE service center, since it will oxidize the contacts on the elements (and if the smartphone is not turned off, then this can lead to a short circuit of the internal elements ). Diagnostics will not take too long. a specialist will almost immediately identify the cause of the breakdown and tell you what will be needed to return the gadget to a working condition.

How serious is the problem that the smartphone is not receiving calls? Any highly qualified professional would tell you that it is indeed quite serious. Many owners say that this fragment occurs periodically and over time it can pass on its own. But you must understand that sooner or later it will result in a certain malfunction for you. It cannot be argued that this is a technical malfunction or a factory defect of a certain component. There can be many reasons, this is a banal fall, and problems with contacts. Diagnostics will be required to find out the cause. If, in addition to the main reason, you noticed such difficulties as interference during a conversation or it is hard to hear the interlocutor in the iPhone (“iPhone”), then most likely the reason lies in the dynamics.

over, two how different problems can have a common cause. So, we can notice that it is not the phone that is broken, but only one component that can be repaired.

It is difficult to hear the interlocutor iPhone (“iPhone”). Step-by-step instruction

When you notice the prerequisites for a malfunction, try to find time to contact a special service, where experienced craftsmen will provide urgent and technically correct assistance. When choosing a company, we recommend that you be especially careful, because the market is full of unscrupulous ones, and it is possible that cheap copies of components will be installed on your phone, which will be passed off as originals. Apple-SAPPHIRE has been cooperating with the manufacturer for a long time and provides guarantees for every detail, as well as for the repair itself.

Among other things, our employees will provide you with consultations, point out the cause of the malfunction free of charge and announce the for the upcoming repairs. As a result, your iPhone will work for a long time, you will receive a warranty for a certain period of its operation.

Important! We strongly do not recommend to perform any actions to repair the “iPhone”, as your inept manipulations can significantly affect the performance of the device.

The main mistake that many iPhone owners make is to wait for it to start working and fix itself. Sometimes an untimely appeal to a service center threatens the device with even more expensive repairs or, even worse, its complete failure. Please note that the cost of repairs compared to the cost of buying a new device will be minimal.!

Fixing the problem yourself

When the interlocutor is not heard on the phone, the first thing to do is to make sure that the problem is not accidental or inattentive. Sometimes during a call, the user presses the volume control button, and the sound in the smartphone disappears. If the volume on iPhone is set to maximum, then the following may help to solve the problem:

  • operating system update
  • cleaning the sound channel
  • reboot smartphone
  • restore default settings
READ  How to connect Samsung buds to iPhone

If, while talking on the phone, the sound in the speaker suddenly disappears and the headphone icon appears on the display, this may mean a malfunction of the audio jack and the loop connected to it. To fix the problem, just plug in the headset and pull it out sharply (but carefully).

I can’t hear the interlocutor on the iPhone

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

Users of mobile devices from Apple sometimes have a situation when it is hard to hear the interlocutor on the iPhone. In exceptional cases, the cause of the malfunction is communication problems. just wait a while or restart the smartphone for the sound to return to normal.

If the problem of poor audibility during a call appears regularly, then you should look for the causes of the problem in the smartphone itself and eliminate them.

Poor audibility due to earpiece loop

If the subscriber is not heard on the phone during a call, or the sound in the speaker constantly “floats” during a call, the cause of the breakdown may lie in the loop of the earpiece. The flat connection cable can oxidize or break and you will not hear the caller during a call.

To fix the problem, you need to replace the flat cable on the iPhone using a special screwdriver, a flat plastic object and an original spare part, but this is a rather difficult task for a person who is not familiar with the device.

Modem breakdown

Quiet conversation sounds are often the result of a broken modem in a new phone. The symptoms of this part in an Apple mobile device are as follows:

  • rewind sounds are heard during a conversation
  • connection suddenly disappears when making a call
  • very quiet sound of microphone and speaker

It is very easy to determine that the caller cannot be heard on the phone due to a breakdown of the modem. If your smartphone does not catch the network or does not connect to the Internet, then most likely this is caused by damage to the modem. It is not recommended to repair or replace this part yourself, as careless actions can lead to more serious damage.

Broken speaker

Most often, it is hard to hear the interlocutor on the iPhone if the speaker is malfunctioning. This part of the smartphone is one of the most vulnerable, since dirt and dust accumulates on the membrane. The main reasons for speaker breakage in iPhone are as follows:

How To Fix The Ear Speaker On Any iPhone! [Hearing Issues | Low Volume]

  • moisture ingress
  • fall of a mobile device
  • swipe
  • violation of the contact of the audio codec with the board

The first thing to do when the sound in the speaker becomes quieter or disappears is to thoroughly clean the membrane. If this does not help, then you will need to replace the speaker in the iPhone. When a smartphone is dropped or bumped, the speech and microphone codecs are damaged, which affects the quality of the conversation. In this case, you will hardly hear the caller during a conversation, and he may not hear you at all.

Professional smartphone repair

If you become hard to hear your interlocutors when talking on the iPhone, do not take risks and do not make repairs yourself. Entrust this complex process to experienced specialists registered in Yuda. Professional craftsmen know how to fix damage of any complexity and restore the functionality of a smartphone. The advantages of working with private craftsmen are as follows:

  • prompt troubleshooting at home or in the office
  • departure at a convenient time for you
  • minimum iPhone repair cost
  • guarantee for all work performed

An experienced technician will determine why the new iPhone is out of order and repair it using genuine parts and quality consumables. If you become hard of hearing the interlocutor on the iPhone, seek help from professionals who can fix any problem in a short time.

Cleaning the speaker mesh

The speaker mesh is the most clogged on older models. That is why, if the interlocutor is hard to hear on your iPhone 5S, carry out a complete cleaning with a dry, non-sharp object. The main thing is not to bring moisture inside the speaker (applies to iPhone 5S, 6) and do not pierce it. Some users use a vacuum cleaner at minimum power for cleaning, but those. Apple Support does not recommend this procedure to avoid damaging the device.

Malfunction with software

If the speaker is quiet, the problem lies in the OS of the device. If visual inspection has not yielded results, then restoring the device is the next step to solving the problem. How OS recovery works?

  • Using a cable, connect the device to your computer, launch iTunes and create a copy of the gadget files. When restoring the software, contacts, music and photos will be deleted from the phone, so it is important to create a backup.
  • Run the firmware using the “Restore” button.

iTunes will find a suitable IOS and install it on the iPhone automatically. To speed up the process, if necessary, you can use a previously downloaded firmware file. Hold down the “Shift” key while specifying the path to the file, and then click “Restore”. Often on the iPhone 7, the interlocutor is hard to hear during a conversation due to software problems.

If it is not possible to reflash the phone on your own, the service center employees will help. They more accurately diagnose the cause of low audibility and install, if necessary, new software. We will talk about the service center in more detail a little later.

If all else fails

The methods did not bring the desired result? On iPhone 6, you can’t hear the interlocutor and the call is possible only through the speakerphone? The problem lies in the internal components of the mobile phone.

I can’t hear the interlocutor on the iPhone

Dropping or getting wet is a common cause of speaker breakage. As a result, the interlocutor is hard to hear on the iPhone 6 and other models. Speaker problems are observed not only on the iPhone 6, 7, but also on earlier models. First, check the link indicator of the device. If the signal level is normal, and the sound is quiet, the malfunction is hidden in the phone itself.

Adding volume

A standard feature worth trying out. Change the volume using the buttons on the side panel. It is also worth watching the sound indicator that appears on the smartphone screen.

difficult, hear, interlocutor, iphone

Reasons for poor hearing on iPhone

If this is not the first time you are faced with the fact that it is hard to hear the interlocutor on the iPhone 7 during a conversation, try to find the reason yourself. Make sure that:

  • The microphone is located at a normal distance from the sound source. The reason is trivial, but pay attention to it first. Smartphone users, using the speakerphone during a call, hold the phone in such a way that the speaker is too far away. Therefore, poor audibility of the subscriber arises.
  • The case does not obstruct the microphone of the device. The non-original protective shell becomes a barrier between the user and the microphone. By the way, not only the cover acts as a physical barrier. Falling a mobile phone, as well as mechanical stress on the internal parts of the upper loop, harm the normal operation of the smartphone.
  • Upper loop failure. If the loop is completely broken, the volume control and mute buttons on the device will not work normally. By the way, it is because of the malfunction of the loop that the interlocutor is hard to hear on the iPhone 5S.

Methods for improving hearing

The first way to solve the problem is to restore the operation of the IOS OS. In 99% of cases, if a new version is installed incorrectly or a jailbreak is implemented, there are problems with poor audibility on the iPhone.

Clean up applications from your mobile device that have been installed in the last days or weeks. Even popular and seemingly safe applications like WhatsApp, Telegram and Instagram affect the speaker’s performance due to unforeseen bugs and errors.

Another commonplace, but effective step is to reboot the smartphone. Turn off the device and then restart it using the side button (on iPhone 6,7) or top (iPhone 5S), and the Home button.

Still hard to hear the interlocutor on the iPhone? Then consider other methods of solving the problem.

Shipping film and covers

Didn’t changing the position of the volume buttons improve the sound quality? Can’t hear another caller on iPhone 7? If we are talking about a transport film, then you may have forgotten to remove it from your mobile phone immediately after purchase. The film protects the device before purchase, but after purchase it does not make sense and prevents the speaker from working in normal mode.

| Contacts | Content | RSS