Lenovo b50 how to enter BIOS

Table of Contents

How to Run System Restore on a Lenovo Laptop?

In Windows (or shut down your computer), press the Novo button or double-click the OneKey Recovery icon to start the Lenovo OneKey Recovery system. In the Novo buttons menu. select System Restore. This menu may also be called the System Recovery Menu.

How to enable advanced BIOS settings on Lenovo laptop?

To enter BIOS via function key

Turn on your computer. The Lenovo logo is displayed on the PC screen. Press (Fn) F2 immediately and repeatedly.

How to choose to boot from a USB flash drive on a Lenovo laptop?

  • To get into the BIOS of a Lenovo laptop, immediately after turning it on, hold down two keys on the keyboard: FnF2:
  • Using the arrows on the keyboard, go to the Security section.
  • Next, go to the Boot section.
  • And now we leave from here, saving the changes made.
  • Go to the Boot section.

How to enter BIOS Windows 7 on Lenovo laptop?

To enter the BIOS, you need to have time to repeatedly press a key or key combination before loading the operating system. Usually these are the Delete, Esc., F1, F2, F12 keys (depending on the manufacturer). Some laptops have a dedicated button to access Setup.

How to enter BIOS Lenovo g50 45?

Thus, it turned out that to go to the BIOS, you must press FnF2. And further, if you need to make a Print Screen, then you won’t be able to take a picture without holding Fn. The second way to go to the boot menu is no less interesting. On the left side of the laptop, next to the power socket, there is a small button.

How to enter BIOS Lenovo IdeaPad 320?

To enter BIOS via function key

Turn on your computer. The Lenovo logo is displayed on the PC screen. Press (Fn) F2 immediately and repeatedly.

How to enter Boot Menu on Lenovo g50 laptop?

How to enter the Boot Menu on Lenovo laptops

For almost all Lenovo brand laptops and all-in-ones, you can use the F12 key when turning on to enter the Boot Menu. Also, additional boot options for Lenovo laptops can be selected by clicking the small arrow button next to the power button.

Features of entering BIOS on laptops with Windows 8

Let’s consider how to enter the BIOS on a Lenovo v580c laptop with Windows 8. After pressing and holding the special button (with an arrow) near the power input, the Windows 8 system recovery window appears. Select the language, keyboard layout, then the Diagnostics mode (recovery computer). Then go to “Advanced Settings”, then to “UEFI Firmware Settings” and click on the “Restart” button. After we get to the BIOS menu.

Lenovo B50 G50 80 Boot From Flash USB Install Windows 2017

Another case is when after installing Windows 8 on a v570 laptop, the BIOS entry keys F2 and F12 are automatically blocked. Also in this model there is no special button “Novo”.

To unlock them, you need to remove the battery, unscrew the bottom cover and remove the battery for a few minutes. Thus, the BIOS settings are reset. After that, the keys will be unlocked.

Today we will look at how to configure the BIOS of a Lenovo B50 laptop to install Windows 7, 8, 10 from a flash drive or disk.

To do this, we need a bootable flash drive (disk) with your operating system. We insert it into the left connector, USB port.

Turn on the laptop and press Fn and F2. to enter BIOS. At the bottom there is a panel with tips for navigating the menu.

In the parameter “Boot Mode” set “Legacy Support”.

We see that a new item “Boot Priority” has appeared, change its value to “Legacy First”.

Go to the “Exit” tab and exit with saving changes (Exit Saving Changes).

At boot, press Fn and F2 again to enter BIOS. Go to the “Boot” tab again and see that the boot sequence has appeared in Legacy.

We find our flash drive (disk), and with a combination of the Fn and F6 keys, we raise them to the first place.

After, we exit with saving the settings, as we already did.

The laptop will restart and, upon boot, will start installing Windows from a flash drive (disk).

To reset to factory settings, go to the “Exit” tab and select “OS Optimized Default”, confirm the reset.

Then exit with saving. All settings have been reset and the current version of Windows will boot normally from the hard drive.

Lenovo is one of the largest computer companies in the world. And since the demand for the products of this company is growing, the questions about the correct operation and operation of Lenovo equipment are becoming more and more relevant for users. And for those who decided to reinstall Windows, at the very beginning of the process, the question is raised: how to enter Lenovo BIOS?

First, you need to figure out what BIOS is and what it is eaten with. So, the BIOS on Lenovo is a special microscopic program that ensures correct and stable interaction between all components of the PC and the OS and allows you to customize it. And the BIOS setting is a standard PC setting that helps the system calculate the functions that should be activated and how they should be loaded. BIOS is on any computer, be it Lenovo B560, Lenovo S21 or M5400.

To date, several different versions of Bios have been created, which differ slightly in appearance, but as for the functions, everything is identical here. Each of the versions is used for the initial setup of the computer and for testing it. The BIOS functionality includes:

  • Date and time setting;
  • Selecting the boot sector. the device from which the operating system will be installed or loaded;
  • Checking system components, including checking the health of RAM and hard drives;
  • Connection protection. password on your laptop to protect personal data.

Lenovo b50 enter BIOS

BIOS is a very important component of a computer and is a piece of system software. With its help, when the computer is turned on, the operability of all components is tested and checked. It allows the user to make changes to the operation of individual components of the computer, set the boot priority, date and time, etc. In this article, we will look at how to enter the BIOS on Lenovo laptops. In different models of Lenovo brand laptops, the input is slightly different. If this is the first time you want to enter the BIOS, you can see how to do this in the instructions for your laptop. There is also a way to find out which login keys your model is using. Within 2-3 seconds after turning on the laptop, they are displayed on the screen as a hint.

In general, most Lenovo models use the F2 key or FnF2 combination to enter the BIOS. But not all models react to their pressing.

How to enter settings on a Lenovo b50-30 laptop

On this model, you will not enter BIOS settings using the Delete, F2, F8 or F10 buttons, and there is no button near the power input. The button for calling the Novo menu is located on the right side near the USB port. In order to press this button, you need a pin or sharp object. Then you will be taken to the “Novo Button Menu”.

READ  How to enter the service menu of a Samsung TV

Entering BIOS on Lenovo g50-30 laptop

In order to enter the BIOS on the Lenovo g50 model, you need to press a special button, near which an arrow is indicated. This button is located near the power (charging) input. On the switched off laptop, you need to press and hold it until “Novo Button Menu” appears.

Then use the up / down arrows to select “BIOS Setup”. Thus, you will be able to enter the settings in the BIOS. If you change something in the settings, press FnF10 to save the changes and exit. You will be prompted to save the changes and then press Enter to confirm them.

How to enter BIOS

Notebook BIOS entry methods may differ for different Lenovo models. First, try the standard login method. when starting a personal computer, you need to press the F2 button on the keyboard, sometimes holding down the Fn key before that. Next, the PC parameters menu will be called.

But this method is not always working. For some Lenovo models, the BIOS does not load when you press F2 or FnF2. for example, Lenovo Legion Y520, Lenovo G70, G50-30, or G500. If you tried to enter the BIOS using the above method, and you did not succeed, the following instruction is for you:

  • On the side of the laptop (where the charging socket is usually located) or right next to the power button, there should be a special small key with a curved arrow. It’s called Novo Button, One Key Recovery, or One Key Rescue System. You need to turn off the laptop and click on it.
  • If you pressed the correct button, the laptop will start, and on the screen you will see that we are going to a special startup menu:
  • Normal Startup
  • BIOS Setup (parameters);
  • System Recovery (system recovery);
  • Boot Menu.
  • As you probably already guessed, in order to enter the BIOS on Lenovo, you need to go to the BiosSetup item. After you select it, you will see that the laptop entered the BIOS and you can configure it as you like.

Configuring BIOS on Lenovo b50-70 to install boot from a USB flash drive

To configure boot from a USB flash drive to Lenovo b50-70, install it into the USB port and go to the settings using the FnF2 key combination. Go to the Boot tab in the Boot Mode section and change UEFI to Legacy Support. In Boot Priority, we also change to Legacy First. Then we exit and confirm saving the changes.

After restarting the laptop, you again need to go into the BIOS settings using FnF2. Go to the Boot tab. Here, in the Legacy section, a hard disk, a drive and a USB flash drive have appeared. To boot from a USB flash drive, transfer it to the first place using the FnF6 keys.

After installing the operating system from a USB flash drive, you can return the default settings (to factory settings) in the Exit section. Here we select the item Load Default Setting.

Two secrets of running BIOS

But if you still did not manage to start the BIOS using one of the above methods, and the laptop has Windows 8.1 or higher operating system, we will tell you two startup secrets.

  • You need to turn on the PC. In a running computer on the desktop, drag the mouse pointer to the lower right corner of the desktop (call the side menu).
  • A menu opens to us, where we select the items “Options”. “Update and Recovery”. “Recovery”.
  • Here, in the “Special boot options” section, click on the “Reload now” button.
  • Next, a blue screen with tiles will open. Open the “Diagnostics” tile, by clicking on which you will be taken to additional parameters.
  • You need to open the item “UEFI Firmware Options” and click the “Restart” button. Done! You are in BIOS!

Second secret. Many Win 8.1 users make an error when trying to enter BIOS. Everyone knows how to get into the BIOS. you need to press a certain button on the keyboard. To do this, the user clicks on “Shutdown”, waits for the laptop to turn off, and then presses the button to enter the BIOS, but the computer starts in the old way. the OS is loading.

The whole problem is that the Windows 8.1 operating system works initially with the fast startup function, which is based on sleep mode. enter the BIOS without turning off the PC, but restarting it.

Some helpful tips:

  • After entering the BIOS, go to the various settings of the system parameters and its boot in the BIOS itself. Be very careful and careful, and it is better not to touch what you do not know, as there is a risk of doing something wrong and completely losing your computer. And after making all the changes, go to the “Exit” section and select “Save exit”. After that, the laptop will be restarted, and on a new start, all the settings that you had to set before will already be taken into account.
  • If the above methods of entering BIOS on a Lenovo laptop do not work, try holding down the F12 key while starting the device until the BIOS starts. this method works on some Lenovo models.
  • It is very rare, but it still happens. in some models the F1 key works (you need to press it several times while the laptop turns on).
  • Manufacturers recommend adjusting PC settings in BIOS only with a fully charged laptop battery, since if during the setup process your laptop turns off due to being discharged, then this is likely to cause some system problems in the future.
  • Before exiting BIOS, be sure to save all changes so as not to get lost.

Remember that BIOS setup is a very serious undertaking that requires maximum understanding of the process and great attention to detail. You should be aware that if the configuration is incorrect, some components of the system may not work correctly, which brings additional difficulties in operation. And if you doubt that you know how to do it right, it is better to call qualified specialists, this will save money, time and nerves. We hope this article helped you figure out how to enter BIOS.

How to enter BIOS: method 5

The latter method is the most radical, and can only be recommended to those users who already have good experience in disassembling such a device. Otherwise, you run the risk of irreparably damaging your Lenovo laptop.

The essence of the method is as follows: to reset all BIOS settings, you need to disconnect for some time a special CMOS battery that is connected to the motherboard of the device. After performing this action, the device will “think” that the settings may be incorrect and will prompt you to open the BIOS to correct them, or it will enter it on its own.

BIOS batteries look different and in almost every model each has its own place, so you have to dig around before you get to it and unplug it. But in general, the procedure is as follows:

  • Disconnect the laptop, remove the battery;
  • Access the CMOS battery and carefully disconnect it from the motherboard;
  • Wait 15-20 minutes (this is necessary so that the CMOS chip is de-energized and the capacitors on the motherboard are discharged);
  • Connect the battery back, assemble the laptop, plug in the power and turn on the device;
  • If you did everything correctly, you will see the BIOS settings screen.

We hope that one of the above methods helped you find the answer to the question of how to enter the BIOS on a Lenovo P70, G50-80, Lenovo ThinkPad T400 or T440 laptop.

Secret of how to enter BIOS on a lenovo laptop

Newbies sometimes hear “Reboot enter BIOS lenovo b50 press setup key /. launch ”and act strictly in accordance with what is written or heard. They simply turn off the Lenovo laptop and enter the operating system and press the BIOS entry key. But in this case, it is not the BIOS that will open for them, but the OS will start loading, the problem is that the Windous 8.1 operating system is programmed for a fast entry, which is tied to hibernation. And therefore, the BIOS can only be entered through the Reboot menu on your favorite laptop. Remember, do not run “turn off and on” on your ideapad.

As you can see, nothing complicated. You just need to get used to it and keep in mind that your laptop is a little special compared to many others.

Entering BIOS on Lenovo Laptop: Method 2

Entering the BIOS on a Lenovo laptop is carried out in several ways. unfortunately, there is no single solution for how to get into the BIOS for everyone, but the ways to start it are quite simple. So, let’s move on to the first method.

The most popular solution is to use a keyboard. pressing several buttons at the same time on the laptop immediately after starting it up. Turn off your laptop (this method will not work with enabled), then press the power button and immediately one of the options:

  • F2 button or Del button;
  • Combination FnF2;
  • F1 key
READ  How to connect Bluetooth on Lenovo laptop

If the BIOS was launched incorrectly, the computer will boot the OS normally. In this case, you will have to turn it off again and call the BIOS again, but using the new boot method. In order not to play the “guessing game” and start the BIOS faster, you can also look at the instructions for the Lenovo laptop.

It also happens that the laptop starts up too quickly, and the user does not have time to press the required combination. To avoid this, turn off the laptop by holding down the power key for 10-15 seconds. Then hold down the desired combination to enter the BIOS, and then press the power button and release, while continuing to hold down the keys to enter the BIOS until the desired screen with parameters appears in front of you.

Entering BIOS on a Lenovo laptop

Probably, there are no PC users who, at least once during the entire time of their work with a computer, would not need to enter the BIOS. Those who use Lenovo products did not stand aside either. This manufacturer has a huge list of laptops, and not all of them can enter the BIOS in the same way, but it is easy to configure it. the functions are the same everywhere. Today we will try to figure out how to enter the BIOS in a lenovo laptop, be it Lenovo s9, Lenovo z50 or Lenovo b50.

Why is there a need to enter BIOS on Lenovo at all? Even despite the fact that laptop manufacturers in each new released model try to minimize the requirements for PC knowledge from the user and give the simplest answer to the question of how to configure it or determine the cause of problems, sometimes it becomes necessary to fine-tune the parameters. What you can use this input for:

  • Turning on and off some of the hardware parts of the laptop, diagnosing problems;
  • Configuring boot parameters for the OS and the entire device;
  • Setting up the disk subsystem, in particular, the modes of its operation;
  • Customization of many other functions, parts or system in general.

And now the previously promised two secrets

Few people know that there are two more little-known options how to enter BIOS from a lenovo b50 10 laptop. So let’s get started.

Entering BIOS on Lenovo g50-30 laptop

In order to enter the BIOS on the Lenovo g50 model, you need to press a special button, near which an arrow is indicated. This button is located near the power (charging) input. On the switched off laptop, you need to press and hold it until “Novo Button Menu” appears.

Then use the up / down arrows to select “BIOS Setup”. Thus, you will be able to enter the settings in the BIOS. If you change something in the settings, press FnF10 to save the changes and exit. You will be prompted to save the changes and then press Enter to confirm them.

Entering BIOS on a Lenovo laptop

Probably, there are no PC users who, at least once during the entire time of their work with a computer, would not need to enter the BIOS. Those who use Lenovo products did not stand aside either. This manufacturer has a huge list of laptops, and not all of them can enter the BIOS in the same way, but it is easy to configure it. the functions are the same everywhere. Today we will try to figure out how to enter the BIOS in a lenovo laptop, be it Lenovo s9, Lenovo z50 or Lenovo b50.

Why is there a need to enter BIOS on Lenovo at all? Even despite the fact that laptop manufacturers in each new released model try to minimize the requirements for PC knowledge from the user and give the simplest answer to the question of how to configure it or determine the cause of problems, sometimes it becomes necessary to fine-tune the parameters. What you can use this input for:

  • Turning on and off some of the hardware parts of the laptop, diagnosing problems;
  • Configuring boot parameters for the OS and the entire device;
  • Setting up the disk subsystem, in particular, the modes of its operation;
  • Customization of many other functions, parts or system in general.

Entering BIOS on Lenovo Laptop: Method 2

Entering the BIOS on a Lenovo laptop is carried out in several ways. unfortunately, there is no single solution for how to get into the BIOS for everyone, but the ways to start it are quite simple. So, let’s move on to the first method.

The most popular solution is to use a keyboard. pressing several buttons at the same time on the laptop immediately after starting it up. Turn off your laptop (this method will not work with enabled), then press the power button and immediately one of the options:

  • F2 button or Del button;
  • Combination FnF2;
  • F1 key

If the BIOS was launched incorrectly, the computer will boot the OS normally. In this case, you will have to turn it off again and call the BIOS again, but using the new boot method. In order not to play the “guessing game” and start the BIOS faster, you can also look at the instructions for the Lenovo laptop.

It also happens that the laptop starts up too quickly, and the user does not have time to press the required combination. To avoid this, turn off the laptop by holding down the power key for 10-15 seconds. Then hold down the desired combination to enter the BIOS, and then press the power button and release, while continuing to hold down the keys to enter the BIOS until the desired screen with parameters appears in front of you.

How to enter BIOS of Lenovo laptop: method 3

Around the same time that a new BIOS version called UEFI was released, the new Windows 8.1 operating system was released. And along with it, a new way of loading BIOS appeared. through the OS:

  • First you need to go to your desktop. Then we call the side menu of the Windows desktop. to do this, move the mouse cursor to the lower right corner of the desktop. Select “Settings”. “Change computer settings”;
  • Then go to the menu item “Update and recovery”, and then under the line “Special boot options” press the restart button;
  • After the reboot has been completed, we get to the screen with the ability to select an action. Click on the “Diagnostics” tile and then on “UEFI Firmware Settings”;
  • Confirm the selection by clicking on the “Restart” button. Done, the laptop entered the BIOS!

How to Enter BIOS on Lenovo Laptop: Method 4

If you have Windows 10, then there is another way to boot the BIOS, similar to the previous one. Here it is implemented in a slightly different way:

  • In the “Start” menu, click on “Options”, select the “Update and Security” item;
  • Open the “Recovery” tab and click on restart under the “Special boot options” label;
  • The device reboots, and we see an action selection window. After you enter the desired menu, do the same as in the previous paragraph when starting BIOS on Windows1.

If, when using this or the previous method, you did not see the “UEFI Firmware Options” button on the screen, this means either that this laptop has an outdated BIOS version without UEFI, or that the OS was installed on the laptop in Legacy mode. Then work with UEFI is not available from the operating system. you will have to use the first two methods.

How to enter BIOS of Lenovo laptop: method 1

Hardware manufacturer Lenovo has created its own software called Lenovo One Key Recovery, a system that includes the ability to back up and restore data to Lenovo PCs. In order to turn it on, there is an additional button on the laptop. Novo. It is found on almost all the latest laptop models from Lenovo and is located either on the side of the case or near the power button. Sometimes, in the most modern models, there is a small hole inside which there is a microswitch. In this case, you need to use a thin, non-sharp object. for example, a paper clip.

And despite the fact that the direct purpose of this button is not to call the BIOS, you can still get into the BIOS using it:

  • Turn off the device by holding down the power key for 10-15 seconds;
  • Hold the Novo key for 2-3 seconds and release;
  • Your laptop turns on and opens a small menu with a choice. click on the line with the signature “BIOS Setup”.

How to enter BIOS on a Lenovo laptop

Good day.

Lenovo is one of the most popular laptop manufacturers. By the way, I must tell you (from personal experience), laptops are quite good and reliable. And there is one feature of some models of these laptops. an unusual entry into the BIOS (and you often need to enter it, for example, to reinstall Windows).

In this relatively short article, I would like to consider these features of the entrance

READ  How to boot from a USB stick on a lenovo laptop

Entering BIOS on a Lenovo laptop (step by step)

1) Usually, to enter the BIOS on Lenovo laptops (on most models), it is enough to press the F2 (or FnF2) button when it is turned on.

However, some models may not react at all to these presses (for example, Lenovo Z50, Lenovo G50, and in general the model range: g505, v580c, b50, b560, b590, g50, g500, g505s, g570, g570e, g580, g700. z500, z580 may not respond to these keys)

2) The above models have a special button on the side panel (usually next to the power cable) (for example, Lenovo G50 model, see Fig. 2).

To enter the BIOS, you need to: turn off the laptop, and then press this button (an arrow is usually drawn on it, although I admit that on some models the arrow may not be).

By the way, an important point. Not all Lenovo laptop models have this service button on the side. For example, on a Lenovo G480 laptop. this button next to the laptop power button (see Fig. 2.1).

3) If everything was done correctly, the laptop should turn on and a service menu with four items will appear on the screen (see Fig. 3):

LENOVO B50-80 ENTERING BIOS AND DEFAULT SETTINGS

To enter BIOS. select BIOS Setup (BIOS settings and settings).

4) Next, the most common BIOS menu should appear. Then you can configure the BIOS in the same way as other laptop models (the settings are almost identical).

By the way, maybe someone will need it: in fig. 4 shows the settings of the BOOT section of the Lenovo G480 laptop for installing Windows 7 on it:

  • Boot Mode: [Legacy Support]
  • Boot Priority: [Legacy First]
  • USB Boot: [Enabled]
  • Boot Device Priority: PLDS DVD RW (this is a drive with a Windows 7 boot disk installed in it, note that it is the first in this list), Internal HDD

After changing all the settings, remember to save them. To do this, in the EXIT section, select “Save and exit”. After restarting the laptop, the installation of Windows 7 should start

5) There are certain laptop models, such as Lenovo b590 and v580c, where you may need the F12 key to enter the BIOS. Holding this key right after turning on the laptop. you can get into Quick Boot (quick menu). where you can easily change the boot order of various devices (HDD, CD-Rom, USB).

6) And the F1 key is used quite rarely. You may need it if you are using a Lenovo b590 laptop. The key must be pressed and held after turning on the device. The BIOS menu itself differs little from the standard.

The manufacturer recommends that you charge the laptop battery sufficiently before entering the BIOS. If during the process of configuring and setting parameters in the BIOS, the device is abnormally turned off (due to lack of power). there may be problems in the further operation of the laptop.

To be honest, I’m not ready to comment on the last recommendation: I have never experienced problems when turning off a PC when I was in the BIOS settings

How to enter Lenovo boot menu?

How to enter the Boot Menu on Lenovo laptops

For almost all Lenovo brand laptops and all-in-ones, you can use the F12 key when turning on to enter the Boot Menu. Also, additional boot options for Lenovo laptops can be selected by clicking the small arrow button next to the power button.

What you need to do to enter the BIOS?

To go to the BIOS menu on a stationary computer, at boot, you need to press the Del key, in rare cases. F2. Usually the required key is indicated on the screen before displaying information about the operating system.

How to install Windows 7 on Lenovo G 50 45 laptop?

How to install Windows 7 on Lenovo G50 laptop

  • We go into BISO (fnf2 key or turning on the laptop using the secret button on the left near the power connector)
  • In the Exit section, select OS Optimized. Win7 (if it is not there, then other OS)
  • In the Boot section, in the Boot Mode item, select Legacy Support; in the Boot Priority item, select Legacy First.

How to boot from a USB flash drive on a Lenovo laptop?

  • To get into the BIOS of a Lenovo laptop, immediately after turning it on, hold down two keys on the keyboard: FnF2:
  • Using the arrows on the keyboard, go to the Security section.
  • Next, go to the Boot section.
  • And now we leave from here, saving the changes made.
  • Go to the Boot section.

How to enter BIOS Lenovo g50 45?

Thus, it turned out that to go to the BIOS, you must press FnF2. And further, if you need to make a Print Screen, then you won’t be able to take a picture without holding Fn. The second way to go to the boot menu is no less interesting. On the left side of the laptop, next to the power socket, there is a small button.

lenovo, enter, bios

Methods for Entering BIOS Settings on Lenovo Laptops

BIOS is a very important component of a computer and is a piece of system software. With its help, when the computer is turned on, the operability of all components is tested and checked. It allows the user to make changes to the operation of individual components of the computer, set the boot priority, date and time, etc. In this article, we will look at how to enter the BIOS on Lenovo laptops. In different models of Lenovo brand laptops, the input is slightly different. If this is the first time you want to enter the BIOS, you can see how to do this in the instructions for your laptop. There is also a way to find out which login keys your model is using. Within 2-3 seconds after turning on the laptop, they are displayed on the screen as a hint.

In general, most Lenovo models use the F2 key or FnF2 combination to enter the BIOS. But not all models react to their pressing.

Configuring BIOS on Lenovo b50-70 to install boot from a USB flash drive

To configure boot from a USB flash drive to Lenovo b50-70, install it into the USB port and go to the settings using the FnF2 key combination. Go to the Boot tab in the Boot Mode section and change UEFI to Legacy Support. In Boot Priority, we also change to Legacy First. Then we exit and confirm saving the changes.

After restarting the laptop, you again need to go into the BIOS settings using FnF2. Go to the Boot tab. Here, in the Legacy section, a hard disk, a drive and a USB flash drive have appeared. To boot from a USB flash drive, transfer it to the first place using the FnF6 keys.

lenovo, enter, bios

After installing the operating system from a USB flash drive, you can return the default settings (to factory settings) in the Exit section. Here we select the item Load Default Setting.

How to enter settings on a Lenovo b50-30 laptop

On this model, you will not enter BIOS settings using the Delete, F2, F8 or F10 buttons, and there is no button near the power input. The button for calling the Novo menu is located on the right side near the USB port. In order to press this button, you need a pin or sharp object. Then you will be taken to the “Novo Button Menu”.

lenovo, enter, bios

Entering BIOS on Lenovo g50-30 laptop

In order to enter the BIOS on the Lenovo g50 model, you need to press a special button, near which an arrow is indicated. This button is located near the power (charging) input. On the switched off laptop, you need to press and hold it until “Novo Button Menu” appears.

Then use the up / down arrows to select “BIOS Setup”. Thus, you will be able to enter the settings in the BIOS. If you change something in the settings, press FnF10 to save the changes and exit. You will be prompted to save the changes and then press Enter to confirm them.

Features of entering BIOS on laptops with Windows 8

Let’s consider how to enter the BIOS on a Lenovo v580c laptop with Windows 8. After pressing and holding the special button (with an arrow) near the power input, the Windows 8 system recovery window appears. Select the language, keyboard layout, then the Diagnostics mode (recovery computer). Then go to “Advanced Settings”, then to “UEFI Firmware Settings” and click on the “Restart” button. After we get to the BIOS menu.

Another case is when after installing Windows 8 on a v570 laptop, the BIOS entry keys F2 and F12 are automatically blocked. Also in this model there is no special button “Novo”.

To unlock them, you need to remove the battery, unscrew the bottom cover and remove the battery for a few minutes. Thus, the BIOS settings are reset. After that, the keys will be unlocked.

BICBON.COM 2021