Monitor Out Of Range How To Fix Windows 10

Set the correct screen resolution settings when starting the game

The functionality of the Windows OS allows you to set the screen resolution settings the user needs before starting the game itself. To do this, open the properties of the game shortcut as described above, and at the end of the “Object” timeline, write:

In this case, w is width (screen width) and h is height (height). Instead of the specified values, you can register the parameters supported by your monitor, and it will run the game with the resolution you specified.

Will register the required resolution

An alternative option for such a launch is to write the screen resolution settings in the text file of the game configuration settings. It is recommended to look for such a file in the game folder (it can have the.ini or popular.xml extension), and open it with a standard text editor of the “Notepad” level. Here you can find the settings for the screen resolution and its Hz, and set instead the correct values ​​supported by your monitor.

Will register the correct indicators

Working with monitor and map

In some cases, the error “Out of range 67.5 kHz / 60 Hz and 75.0 kHz / 60 Hz” may be caused by a hardware failure of the PC card or monitor. It is recommended that you try to connect your monitor to a second PC, checking that it works.

It is also recommended to borrow a monitor from one of your friends, and connect it to your PC to make sure that the prerequisite for dysfunction is NOT the failure of your card. If there are similar problems, replace the Corresponding Component of your PC.

Dealing with 67.5 kHz / 60 Hz and 75.0 kHz / 60 Hz errors

To get rid of errors outside the range of 75.0 kHz / 60 Hz and analogs, you need to use Several methods, which I will describe below.

Boot in VGA mode

An alternative solution to the “Out of Range” error is to boot the PC in VGA mode (or “Enable Low Resolution Mode”). When the system boots, quickly press F8 again, and in the menu that appears, select the specified VGA mode (or “low resolution” mode). Boot the system in this mode, then set the correct settings for your display in Windows.

Enable VGA mode

Enabling Safe Mode

The easiest way to solve the error “outside the range of 75.0 khz / 60hz “when the system starts, the computer is restarted in safe mode.

  • When turning on the PC, quickly periodically press F8, until the system boot menu appears in safe mode.
  • Select “safe mode” here, Wait for the system to boot.
Monitor Out Of Range How To Fix Windows 10

Boot into pointing mode

  • Then go to the display settings settings (on the PC desktop, move the mouse cursor to an empty space.
  • Right-click, and click on “Screen Resolution “or” Screen Options “).
  • Select a value supported by your monitor (for example, 1024 by 768 @ 70HZ), Confirm the changes and restart the PC. Out of range error may disappear.
  • Reasons for the message: out of range when starting a game or computer

    As you know, each monitor has several modes of its operation, differing in resolution and screen refresh rate (“hertz”). For example, it could be 1366 by 768 at 60 Hz, 1280 by 1024 at 75 Hz, and so on.

    The monitor usually receives a request to activate any of the modes from the card to which it is connected. The specifics of its work, in turn, is regulated by the means of Windows OS and the corresponding drivers.

    If the card requires the monitor to activate a mode that is beyond the capabilities of this monitor, then the latter issues a message “Out of the range of 67.5 kHz / 60 Hz and 75.0 kHz / 60 Hz”.

    For example, a monitor can support a maximum resolution of 1366 @ 768 @ 60 Hz, and the card requires it to display a picture with a resolution of 1680 x 1050 @ 80 Hz. In this case, the user usually receives the error discussed in the article.

    Usually this situation occurs due to the following reasons:

    • The user (or any program) set incorrect values ​​for the resolution and screen refresh rate in the settings of any game (or in Windows itself);
    • Something went wrong in the system, which changed the resolution and the hertz pattern of the screen to incorrect;
    • Any virus malware is to blame for changing these parameters;
    • the PC card is out of order;
    • The monitor does not work correctly (hardware failure, “EDID” and other things in the monitor).

    Dysfunction may be caused by hardware failure of your monitor

    Working with drivers

    Other options to fix the out of range problem include working with PC card drivers.

    • It is recommended to boot the PC in safe mode, go to the “Device Manager”, find your card there, and remove it from the list (RMB. “Delete”).
    • Then restart the PC, after which the system will install the fresh driver by itself, after which the problem “out of range” can be solved.

    If this does not help, install the latest drivers for your card (depending on your card, the resources of its developers. “Nvidia”, “AMD”, as well as programs of the “Driver Pak Solution” level will help).

    You use “driverpack Solution”

    Out of band 67.5 kHz / 60 Hz and 75.0 kHz / 60 Hz. what to do

    When you start a game (or even when Windows starts), the message “Out of the 67.5 kHz / 60 Hz range” (or 75.0 kHz / 60 Hz) may suddenly appear on the PC monitor. The appearance of this message usually means that the signal supplied from the card is not supported by the hardware capabilities of this monitor. Below I will analyze the causes of this dysfunction, and also explain how to fix an out of range error on your PC.

    Set the game launcher to windowed mode

    If Out of Range dysfunction occurs when starting a game, try running that game in windowed mode. To do this, move the cursor over its icon on the desktop, right-click, select “Properties”. In the screen that opens, in the “Label” tab, we find the term “Object”, and at the very end of the case, after the quotation mark, put a space and add after the space.

    Save changes and try to run the problematic game.

    Add.w

    If you start the game in Steam, then write.windowed in the additional parameters of the game launch. The game will start in a window, after which you need to go to the game settings and lower their values ​​to a lower level supported by your monitor.

    Also, when starting the game, you can try pressing AltEnter until the game appears. Then go to its settings, and set the optimal screen values.

    Why the Out of Range error occurs

    So, what are the reasons for the “input signal out of range” error? The main and most significant prerequisite for the “Out of range” error is the discrepancy between the screen settings of the game being launched and the technical capabilities of your monitor. Simply put, the game runs at 1366 by 768, and your monitor, due to its outdated specifications, only supports 1024 by 768.

    The next prerequisite for popularity is the absence of the VCRUNTIME140.dll file, an article on LifeHacki.ru will help you download and install in the right place.

    In addition, the refresh rate of the picture (hertz) at which the game starts may also NOT coincide with the capabilities of the monitor (for example, the game starts at 85 Hz, and the user’s old CRT monitor works at a maximum of 75, or even 60). Accordingly, this factor can also lead to an error. “out of range”.

    Another prerequisite for the appearance of this message is the unstable operation of the drivers for the card (or monitor), when the latter either work incorrectly, or are damaged (deleted) for some reason.

    Monitor problems

    Well, in the most cardinal cases, EDID (Extended Display Identification Data. basic data in the monitor, stored in the monitor and read by the card) could “fly off” in your monitor. Loss of EDID is rare, but worth mentioning as well.

    Out of range when starting the game how to fix

    When launching Some programs (usually game type), users may encounter the message “Out of range” on a black background, and the game refuses to start. In addition to the above phrase, a number of numbers may be indicated in the text of the message (for example, “outside the range of 75 khz 60 hz”), the essence of which the user also does not guess. In this article I will tell you what to do when the game starts, the message Out of range appears. I will acquaint the reader with the causes of this dysfunction, as well as List a set of methods for solving the problem.

    READ  Flashing Monitor Screen What To Do Windows 10

    Screenshot of an error when starting games

    How to fix out of range error when starting the game

    To fix the error that gamers have, I recommend doing the following:

    • Set the correct screen resolution settings in Safe Mode. Restart your computer in Safe Mode. When the system boots into this mode, go to your screen settings and set the screen resolution to the mode supported by your monitor (if your monitor maximum mode is 1024 by 768, then set the screen settings to this position). Then reboot the system in normal mode, and try to run the problematic program;
    • Try yourself to register the resolution supported by the monitor in the game settings. To do this, right-click on the game icon on the desktop, and select “Properties” from the menu that appears. In the line “Object”, at the very end, the case will add the screen resolution parameters supported by your monitor in the form “space, dash, w600.h800” (instead of the classic 800 by 600, Substitute other values ​​that are complementary to the capabilities of your monitor).

    For example, text timeline object.w600.h800 click on “Apply” and “OK”.

    You can also try to run this game in a window, added to the text the terms “Object” combination

    -w600.h800.windowed then clicked on Apply and Ok.

    Game shortcut properties

      Set the display resolution supported by the monitor in the graphics card control panel (for example, ATI’s Catalyst Control Center). Run this application, go to the screen resolution settings and set there the value supported by your monitor (do not forget to also set the correct hertsovka value)

    By changing the screen resolution of the map

    • Change the game configuration settings to fix the Out of Range error. The most meticulous can look in the folder “My Documents” for the configuration file of the game settings (usually this file has the extension “ini”). It will be necessary to open it with any text editor, look for the “Resolution” lexeme there and change the Width and Height values ​​(width and height) there to those supported by your monitor. Also hertsovka (Refresh) should have an indicator of “60” and stand in the value “On”;

    Adjusting the game settings

    • Reinstall the card and monitor drivers. Reboot into Safe Mode, open Device Manager (click on the “Start” button, type devmgmt.msc in the search bar and press enter). Find the Display Adapters subsection in the list of devices, click on it to expand it, right-click on the name of your card and select “Delete”. Do the same for your monitor drivers (open the “Monitors” subsection and delete its contents). Then restart your computer and let the system reinstall the drivers for these devices. If for some reason Windows cannot find drivers for your devices, then look for them yourself on the network or use the functionality of the programs for automatic driver installation (DriverPack Solution, Driver Genius worthy of analogues).
    • Check the functionality of your monitor and card. Try connecting your monitor to a second PC and check its functionality. If the problem occurs on another computer, then the monitor needs repair (or replacement). If the problem does not occur, then there may be problems with the performance of your card. I also recommend checking the functionality of cables and adapters from the monitor to the PC, replacing the indicated inoperative elements can also help in the question of how to get rid of the “out of range” error on your PC.

    decision

    To fix the error, you should first of all try to change the system screen resolution settings to the values ​​supported by your monitor. This will help both the use of the safe mode of operation of the OS, and work with the Specialized control panel of the graphic card. I also recommend checking (and, if necessary, reinstalling) the drivers for your card and monitor, sometimes they are the direct cause of the “Out of Range” problem, and their rearrangement will allow you to normalize your PC.

    What to do if the monitor shows “Out of range” or “Out of range” when starting the game

    Black Screen Issue with Out of Range or Input Not Supported” (on some monitors, the image may appear, despite the message) when starting games, it most often occurs either after incorrectly set graphics parameters in the game, or when using games in the form of “repacks”, where the graphics are already configured by a second person, but are not suitable for your monitor.

    Possible solutions to the problem of going out of range on the monitor in games:

    • Try pressing the AltEnter keys. in some games this switches them from full screen to windowed mode. As a result, the image will reappear, and you can change the graphics settings in the game to those that will be supported by your monitor.
    • If among the executable files of the game there is a separate file for launching the graphics settings (look in the folder with the game file or in the game folder in the Start menu), launch it and set the resolution options supported by your monitor.
    • Search (you can use a search on the Internet) where the configuration file of your game is located and either delete it (or better, try to move it to another place first, rather than delete it), or open it in a text editor and find the terms responsible for the screen resolution. The file usually has the extension.cfg or.ini (but there is an exception, for example, in Stalker. user.ltx), may have the word “Config” in its name. The location may also be different: in the folder with the game executable files, in the user folders, for example: Documents \ Rockstar Games \ Red Dead Redemption 2 \ Settings \ or C: \ Users \ Name \ Saved Games \ ID Software \ DOOM \ base
    • Also check if it is possible to launch a specific game with some parameters that sets graphics parameters or windowed mode, for example, Sims 4 can be launched in windowed mode using the “-w” parameter, you can set it (without quotes) as in the shortcut properties. so, for example, in the properties of the game in Origin. Other games often have similar parameters too.

    Out of range, Out of range, Input not supported and Input not supported on monitor when starting Windows or a game. how to fix?

    If you see the message “Out of range”, “Input not supported” or “Out of range” when starting a game or when turning on the computer after booting Windows 10, 8.1 or Windows 7, it almost always means that a signal has been sent to the monitor unsupported by it: either an unsupported resolution or an unsupported screen frequency (frequency). Other message options. Input not supported or Input not supported, may also display supported frequencies or resolutions.

    This manual details what to do if the monitor writes out of range or out of range in various situations. Related topic: Monitor writes Vs signal, No signal or Check signal cable.

    Out of range or Sign in is not supported when you turn on the computer or start Windows 10, 8.1, and Windows 7

    With the messages “Out of range”, “Input not supported” and English analogs of this inscription on the monitor when the computer is turned on, the prerequisite is most likely incorrectly set graphics parameters, and not Corresponding to the supported modes of your monitor. Especially if you have recently changed your screen refresh rate or resolution.

    Note: sometimes it happens that the monitor, according to the characteristics, must support a certain refresh rate, but when you set it, you see a message stating that the signal is out of range or the like. In this case, I recommend that you read the instructions carefully: it happens that a high refresh rate is supported only when connected through certain inputs, without any adapters and adapters.

    In the described situation, there are several simple solutions that may work:

    • If you have an integrated card (output on the motherboard) in addition to the discrete card, you can turn off the computer, connect the monitor to the integrated card and turn it on again. Most likely, an image will appear. After that, using the device manager, remove the discrete card drivers (this will also reset the graphics settings), Turn off the computer, Connect the monitor to the discrete card again, turn on the computer. most likely, you will NOT see Out of range, Input not supported and similar messages : all that remains is to install the drivers again.
    • If you have Windows 7, then most likely the message appears just before switching to the desktop, and before that you see the boot process. If so, immediately after starting the download, start pressing F8 (or FnF8), and then select the low-resolution mode from the menu. In this mode, you can uninstall-install the card drivers (this will reset the graphics settings), and if you have system restore points (Control Panel. System Restore), then use them.
    • In the case of Windows 10, after two incorrect shutdowns of the computer, the system recovery environment (with safe graphics settings) should automatically start, where you can try using restore points or special boot options to start the system in safe mode or at low resolution.
    READ  How To Scan A Screen On A Computer

    Another option for Windows 10 and 8.1, which will require you to use a bootable USB flash drive (you may have to make it on another computer or laptop) with a system with the same bit depth that is installed on your computer:

    • Load the computer from a bootable USB stick. On the screen, after selecting the language at the bottom left, click “System Restore”.
    • In the recovery environment that opens, go to “Troubleshooting”, then. “System Restore” and try using restore points if available.
    • If this did NOT work, then re-enter the recovery environment, open “Troubleshooting”. “Command Prompt”.
    • At the command prompt, enter the command
    • After running this command, you will see a message that the entry was copied successfully and a unique GUID in curly braces. It will be required in the following command:
    • Close the command line and restart the computer, you will see a menu with two items, select “Low resolution”.
    • After booting in low-res mode, you can perform actions with drivers and parameters. The fastest solution is to completely uninstall the card drivers and reinstall.
    • Restart your computer and choose Easy Boot from the menu. To delete the menu item we created, press the WinR keys, enter msconfig and delete it in the “Download” tab.

    If none of the methods helped, and the problem arises when you turn on the computer. try to connect the monitor with a second cable, or even better, using the second outputs on the card and inputs on the monitor, if any.

    The root cause of the error

    Typically, the “Out of Range” message in Windows 10 or another version of the system indicates that a signal has been sent to this monitor, which is Plasma. Most often, this means that the image resolution set in the game or in the OS settings does not correspond to the technical capabilities of the monitor. The same applies to such a property as the screen refresh rate, which may differ from the one set in the game settings.

    An error after installing a new version of the system most often indicates that the driver automatically set the wrong resolution. For example, the physical resolution of a widescreen monitor is 1920 × 1080 px, and the driver set the upper resolution to 1600×1200 px. It turns out that the monitor needs to display 1200 pixels vertically, while the vertical “length” is limited to 1080 pixels. The monitor is not able to do this, as a result of which it writes an error “Out of range 75.0 kHz 60”. Depending on the monitor parameters, the error may have other meanings, for example, “Out of range 67.5 kHz 60”.

    Connecting a second monitor

    If the problem is not related to incorrect operation of the driver, but only caused by incorrect settings, connecting the computer to a second monitor, TV or second output device can help. With your monitor connected, boot into Normal Mode and change the resolution settings to match the physical characteristics of the display you are using continuously.

    When the Signal Out of Range error appears

    In most cases, the “out of range” error is encountered by PC users when launching games, but it can also appear in other cases:

    • After installing a new version of Windows on an old computer;
    • After changing the refresh rate of the screen by the user;
    • Installing buggy card drivers;
    • As a result of errors in the operation of the card or monitor, as well as inept overclocking;
    • When connecting a second display to the computer, displaying images on a TV or other device;
    • In very rare cases, an error is caused by the loss of EDID. its characteristics stored in the monitor itself, read by the adapter.

    How to fix out of range error when booting your Windows 10 PC

    The appearance of the “Out range” error on the monitor when the computer starts up can be caused by the installation of a “crooked” driver, as well as by erroneous actions of the user who manually changed the resolution settings. There are several ways to solve this problem.

    With GeForce Experience

    You can change the parameters of the game that turned out to be out of the resolution range using the utility from Nvidia. GeForce Experience.

    • Open the utility and select your game in it:
    • In the right pane of the window, click the wrench icon;
    • In the panel that opens, select the appropriate resolution and save the settings:

    Unfortunately, GeForce Experience does not support all games, on the other hand, it is NOT the only tool that allows you to change the resolution in a game, not included in its settings. A similar function is available, for example, on Steam.

    Editing the game config file

    This way of coordinating resolution settings is to manually edit the game’s config file. It is not recommended for novice users to use it, since they need to know exactly the name of the configuration file of this particular game and the name of the edited parameters. Most often, such files have the INI, XML extension, or less often LTX or LUA.

    You need to find the parameters width (width), height (height) in them and set values ​​for them that correspond to the resolution of your monitor. You should also pay attention to the refreshRate parameter, its value does not have to exceed the operating refresh rate of the display. If you are in doubt about the correctness of your actions, use the more accessible solutions to the problem or contact the resource from which you downloaded the game for help.

    Out of Range Monitor. How to fix the error

    Software that places high demands on the system and hardware resources of a computer often exhibits “whims”, sometimes requiring the installation of additional components, then giving various errors at startup. A typical example would be computer games, the launch of which leads to a frightening kind of error “signal out of range”, which is issued by the monitor and, apart from a short message on a black screen, the user does not see anything else. In some cases, the error has a different name, namely “Out of range”, “Input not supported” or “Input not supported”, which are essentially the same thing. Other options are possible, for example, “d sub out of range”.

    other solutions

    To fix the “Out of range” or “Out of range” error at startup, you can try using other solutions:

    • Rollback to a previous restore point from a bootable environment.
    • Resolution Changes in Intel, NVIDIA, or AMD Graphics Control Panel after Boot in Safe Mode.
    • Connecting the monitor to the integrated card (if any), then booting in normal mode and removing the problematic discrete card drivers. After that, the display is reconnected to the discrete card, and the drivers are reinstalled.

    Using compatibility mode

    Alternatively, try running the game in compatibility mode. The procedure is very simple:

    • Open the properties of the game shortcut and switch to the “Compatibility” tab;
    • Check the box next to “Use 640 x 480 screen resolution” and save the settings:
    • Launch the game and change the resolution settings in it.

    Second way

    The end result will be the same, but the procedure is slightly different from the previous instructions. Maybe you will like this method more.

    The monitor says “out of range” what to do? Open “Explorer” (This computer), go to the “Documents” folder and look for a directory with the name of your game. There will be many elements inside it:

    But we need to find the one responsible for the configuration. Such files have the extension “ini” or “xml”, and their name indicates options. For example, “UserOptions” or “Config”. In our case, you should open this object in any text editor and find the width (width), height (height) and refresh rate (refreshRate) indicators in it:

    Please enter the correct values ​​for your monitor. The frequency value should be 60.

    Sometimes the configuration files can look like this chaotic:

    But the essence does not change from this.

    Attention! Deleting such files will restore the default settings. And the next time you launch the game application, it will be recreated.

    It should be noted that sometimes the error message contains the following inscription: “d sub out of range” or “out of range”. It simply indicates how the monitor is connected. via the D-Sub (VGA) interface.

    Sincerely, Victor!

    Out of range when starting the game: how to fix the error, why it appears

    Occasionally, the user may encounter an “Out of Range” notification when starting the game. How to fix this, and why this error appeared, read within this article.

    -decision

    To fix the error, you should first of all try to change the system screen resolution settings to the values ​​supported by your monitor. This will help both the use of the safe mode of operation of the OS, and work with the Specialized control panel of the graphic card. I also recommend checking (and, if necessary, reinstalling) the drivers for your card and monitor, sometimes they are the direct cause of the “Out of Range” problem, and their rearrangement will allow you to normalize your PC.

    Cause of malfunction

    Many PC users are immediately scared as the screen darkens, and only a small rectangle with an incomprehensible message indicates that the monitor is working. What does it mean?

    Notices like this (text and numbers may vary) indicate that the game resolution does NOT match the display resolution. Outdated widescreen monitors are often “out of range”.

    Why the Out of Range error occurs

    So, what are the reasons for the “input signal out of range” error? The main and most significant prerequisite for the “Out of range” error is the discrepancy between the screen settings of the game being launched and the technical capabilities of your monitor. Simply put, the game runs at 1366 by 768, and your monitor, due to its outdated specifications, only supports 1024 by 768.

    READ  How To Customize The Screen On Windows 10

    The next prerequisite for popularity is the absence of the VCRUNTIME140.dll file, an article on LifeHacki.ru will help you download and install in the right place.

    In addition, the refresh rate of the picture (hertz) at which the game starts may also NOT coincide with the capabilities of the monitor (for example, the game starts at 85 Hz, and the user’s old CRT monitor works at a maximum of 75, or even 60). Accordingly, this factor can also lead to an error. “out of range”.

    Another prerequisite for the appearance of this message is the unstable operation of the drivers for the card (or monitor), when the latter either work incorrectly, or are damaged (deleted) for some reason.

    Monitor problems

    Well, in the most cardinal cases, EDID (Extended Display Identification Data. basic data in the monitor, stored in the monitor and read by the card) could “fly off” in your monitor. Loss of EDID is rare, but worth mentioning as well.

    Out of range when starting the game how to fix

    When launching Some programs (usually game type), users may encounter the message “Out of range” on a black background, and the game refuses to start. In addition to the above phrase, a number of numbers may be indicated in the text of the message (for example, “outside the range of 75 khz 60 hz”), the essence of which the user also does not guess. In this article I will tell you what to do when the game starts the message Out of range appears, introduce the reader to the causes of this dysfunction, and also list a set of methods to solve the problem.

    Screenshot of an error when starting games

    In problem

    A notification on the monitor indicates that the currently set screen resolution of the game, and does not match the resolution settings of your screen. Often, “Out of Range” appears on widescreen screens.

    To fix the problem, you need to set your screen resolution values ​​for the game itself. To do this, determine the screen resolution of your monitor:

    • Right click on the desktop and select “Display Settings”.
    • Determine what resolution your monitor supports.

    Out of range error when starting the game, how to fix

    Hello. I was once an avid gamer, but now I have “retired”. But I still have a connection with this topic, because I often help other gambling addicts to fix various problems. For example, the screen displays an “out of range” error when starting the game, how can I fix it? Common situation? In fact, the solution is very simple.

    • Cause of malfunction
    • How to fix?

    Monitor writes out of range what to do

    Monitor writes out of range. what to do?

    Here are computer malfunctions, alas, no one is immune. There are frequent cases when, after a seemingly most ordinary shutdown of Windows, when the operating system is rebooted, “incomprehensible” system windows pop up. For example, what if the monitor says “Out of Range”? What to do in this case? First of all, DO NOT panic: the problem can be solved.

    Cause and effect of problem monitor out of range

    The first question to be resolved is the cause of the problem. Knowing what this problem is related to, it will be easier to avoid its recurrence in the future. Are there many such reasons? Yes, only one. in the last Windows session, the monitor settings were changed incorrectly, its frequency was exceeded.

    It happens that this setting also fails for reasons beyond the control of the user:

    • the computer has caught a virus;
    • software installed incorrectly;
    • a software failure caused the card to malfunction;
    • monitor broke.

    However, it is often the user himself who is to blame for such a problem, since he was too clever with the settings. For example, the problem may appear after trying to independently increase the size of the image on the display or as a result of an overload using Reset due to a crash in a computer game.

    Ways to Solve the Out of Range Problem

    The first thing to do when the monitor is writing out of range is to check if it is working properly? To do this, disconnect it from your PC and connect to a second computer. If the problem persists, then there is only one solution. take the monitor to the service center for repair. However, according to statistics, this happens no more than in 2% of cases when the inscription “Out of range” appears when loading. Otherwise, you can solve the problem yourself.

    In cases where the malfunction is caused by Incorrect picture adjustment:

    • Turn on the computer (press the power button).
    • After the monitor lights up, press the F8 key on the keyboard several times. A menu for selecting the type of boot should appear on the screen.
    • Use the keys on the keyboard to find the item in the list:

    for Windows 7 and Vista:

    The OS will then boot into safe mode. However, the icons on the screen will be unusually large. In this case, adjust the screen resolution to make the display look normal. On a PC with Vista and Windows 7, this can be done, for example:

    If you fix the problem in this way Failed, the most likely cause of the problem is a malfunction of the card. In this case, reinstalling the card drivers will help solve the problem.

    Out of range error when starting the game: reason

    The “Out of range” message that the player can see when starting the next project is NOT a system error, but a problem with the monitor on which the image is displayed. The fact is that some monitors do NOT allow you to display an image whose resolution is lower or higher than that set in the system. Most often, the “Out of range” error occurs when you start some old games, which on their own do NOT know how to adjust to the monitor resolution, especially widescreen. The reverse situation is also possible, when the monitor is “too bad” for the selected game, which is launched at a higher resolution by default.

    However, the “Out of Range” error may vary depending on the monitor model and the company that makes it. Therefore, the instructions below will also work if an “Out of range” error occurs when starting the game or “Out of range”.

    Out of range error when starting the game

    Gaming is one of the advantages Windows has over Mac, Linux and other operating systems. Modern developers create their own game projects for consoles and computers. But the launch of the game on the computer is not always smooth. When starting the next project, users may encounter various kinds of errors. lack of system files, lack of drivers, or a monitor error with the inscription “Out of range”. We will look at the error with the wrong range in this article, explaining why it occurs and how to fix it.

    Out of range when starting the game: what to do

    There are several solutions to the problem with the “Out of range” error, but below we will consider the simplest and most effective way to launch a particular game, at the start of which a problem occurs. It should be noted that automatic adjustment of the monitor resolution, a button for which is provided on some models of screens, often helps to get rid of the “Out of range” error. If this button is present on the monitor, press it when you see an Out of Range error. If it did not help to get rid of the problem, go to the instructions below.

    For the error “Out of range” did not occur when starting the game, it is recommended to do the following:

    • The first step is to find out the exact resolution that is currently installed in the system and used. You can do this in several ways, and the easiest one is to look at the resolution in the settings. In the Windows 10 operating system, to find out the screen resolution, you need to press the WindowsI key combination on the keyboard to bring up the options menu. Then go to the “System” section in the list of parameters;
    • A window will open in which you need to click “Advanced screen settings” to go to the display resolution settings;

    Please note: If you already have a shortcut for the game you want on your desktop, then point 4 of this instruction can be skipped.

  • After creating a shortcut for the game on the desktop, right-click on it and select “Properties”;
  • Go to the “Shortcut” tab in the properties window that opens. Further in the line “Object” after the path to the executable file, you need to register the resolution of your monitor. This is done with the command:
  • The “w” is the screen width in pixels, and the “h” is the height. These values ​​were defined in paragraph 3 of the instruction.
  • Please note: If you want to start the game in windowed mode, then after specifying the width and height of the screen, you must also write the word “-windowed”.

    It is also worth noting that you can change the resolution in a number of games not only through the shortcut, but also in other ways, which will also help get rid of the “Out of range” error. For example, you can change the resolution in the settings file, which is most often located in the game folder or in the “Documents” folder on your computer. In a text document with settings, you need to find where the screen resolution is set and enter the values ​​defined in the third paragraph of this instruction.

    | Contacts | Content | RSS