Samsung phone how to open the back cover

Disassembly tools required

To open the phone cover yourself, it is worth preparing special tools. Neatly, without damage and scratches, it will be possible to carry out the manipulation using such things as:

  • Spatula for parsing phones;
  • If it is not there, you can take a plastic card;
  • Paperclip to remove the SIM card;
  • Screwdriver or tweezers;
  • New items.

samsung, phone, open, back, cover

The latter must be purchased in advance from a trusted seller. The quality of the parts to be replaced must be worthy. Otherwise, parsing the phone will not bring the desired result.

How to open the back cover of Xiaomi?

The back cover can be removed in another way. This process is required when it becomes necessary to replace the battery of the Mi gadget. The user must perform the following actions:

  • A paper clip prepared in advance is inserted into a special hole for a SIM card and pressed;
  • The tray is removed;
  • To prevent scratches, it is worth sticking glass or film on the screen;
  • A special blade moves along the body, along the perimeter;
  • If one edge snapped off, while others remained closed, you do not need to jerk the cover off. You can open the device with a suction cup or scissors;
  • After processing the latches, you can lift the cover;
  • The plume is lifted separately with tweezers.

This process is relevant for Xiaomi models. There may be only minor differences. Phones without a fingerprint may not have a menu ribbon cable. Then you can start replacing the battery.

If you use basic tools, have a certain amount of time at your disposal, you can change the battery yourself. To achieve this goal, you need to follow these steps:

  • The phone switches off. The SIM card slot is removed. The end screws are removed with a screwdriver.
  • Pick up the lid with a mediator. This should be done in the place where the two halves of the case are connected.
  • With light sliding movements, you need to increase the gap between the elements of the body along the perimeter.
  • Xiaomi cover opens and removable.
  • The power cable is disconnected from the system board. To do this, you need to pick up the plug.
  • Screws are removed with a screwdriver.
  • Removing the module.
  • You need to pull on both black labels on the battery. This will remove the protective film from the battery.
  • The battery is pushed in with a sharp object and pushed out of the hidden slot.

The old battery can then be replaced. If you follow this guide, you can replace the charger without losing the quality of the phone itself.

How to open the SIM card slot?

Without opening the SIM card slot, it is impossible to carry out subsequent work related to the disassembly of the device. The tray is removed like this:

  • Using a spatula, gently pry off the joint. This is where the back panel adjoins.
  • After detaching the fasteners, the case opens.
  • A sensor cable is located under the back side. It detaches from the rear panel.

The user will now be able to see the phone’s 4x battery and its processor. The mechanics of the device are attached to the body with small bolts. After unscrewing them, you can disconnect the battery or change the lens.

On Redmi devices or this one, you can replace everything except the display. After completing the repair work, it is necessary to collect. Required to proceed in reverse order.

It is difficult to disassemble redmi or note phones without special tools. Their back covers are securely fixed. There are no voids. The ideal option would be to use a spatula. With its help, you can carry out minor work related to disassembly and repair technical processes.

Apart from the scapula, nothing can be used. Sharp objects can damage your miui gadget. Additionally, you need to have a paper clip and a screwdriver at your disposal. You cannot change the SIM card and battery without them.

How to open a Xiaomi phone?

Having prepared the necessary elements, you can start opening your smartphone. The sequence of actions how to open the back cover of Xiaomi is as follows:

  • The tray for the SIM card comes out. No need to leave him. It will interfere with the removal of the cover.
  • Latches open along the perimeter of the gadget. It is important to make an effort here, but do it carefully. It is necessary to proceed gradually from one corner of the phone to the next.
  • The back cover of the smartphone is carefully and slowly removed. A loop will appear, which connects with the back surface to the touchscreen. The train is neatly removed. This will give access to the front panel with the camera for video.

After removing the back cover, the user will see the chip and cameras. A battery is installed under them. It can be replaced if necessary. This must be done with a screwdriver. The elements located inside are secured with bolts.

After unscrewing the bolts, open the protective top panel. The chip will be presented to the attention. It is not recommended to touch it. Don’t make your own configuration changes.

How to open the back cover of Xiaomi and open the SIM card tray

How to open a Xiaomi phone is a question that may arise for owners of phones of this brand. There are many reasons for this. Starting from replacing a card or battery, ending with the need to carry out serious manipulations. The article provides information on how to open the phone cover yourself. How to replace the necessary parts. What are the benefits of such manipulation?

Summing up

If you need to disassemble a Xiaomi phone 4 x, max and 5a, it is not necessary to seek professional help. This Chinese manufacturer produces exclusively monolithic smartphones. Accordingly, the procedure for disassembling devices can be difficult. It is for this reason that the case must be disassembled with special tools. Follow the instructions and act very carefully.

remove the panel on Honor with a plastic tool

To implement this method, we need a small screwdriver and a plastic tool to open the lid (a regular bank card is also suitable).

    Place your Honor phone with the back cover up;

Modern Meizu models have a one-piece body, which reduces the chances of dust, moisture and dirt getting inside the device. Sometimes, device users need to open the phone case on their own to check the motherboard, display, etc. This is not difficult, but it is necessary to observe an increased security measure. All components of smartphones are small and easily damaged, so it is recommended to read the instructions before disassembling the device. How to open Meizu phone below.

Why is it needed

Dismantling an Android smartphone is necessary in case of replacement of the display, back cover, etc. Most service centers provide a guarantee for the work, but it does not always make sense to overpay. For example, any user can replace the display, cover or battery, subject to safety precautions. If the damage to the device is associated with smaller and less obvious details, it is recommended to contact a specialist.

How to Open the Back Cover of Honor Mobile Phone

Honor phones have several basic ways to open the cover, depending on your phone model. Below we will discuss two of the most popular ways to dismantle a panel. Please note that these actions must be carried out as carefully and carefully as possible, without sudden movements. As you can break your device or damage its functional components.

Remove the cover

Whatever the reason, removing the back cover is a process that every user of a mobile device needs to be able to do:

  • First, take your phone in hand. Now it needs to be turned upside down in order to see the back panel of the device. The whole process will take very little time, but you need to remove the cover with two hands.
  • Turn the phone upside down so that the lower part of the mobile phone (where the microphone is located) is at the top, and the upper part (where the speaker that we put to the ear) is at the bottom.
  • Now, with two thumbs of the left and right hand, press down on the latch on the cover. Usually it is located under the camera, but if there is no camera, then at the top of the lid, or it will be indicated by relief elements. Next, together with pressure, move the lid away from you.
READ  How to open the cover of a Samsung a50 phone

If the phone is new, it will take a lot of effort to open the cover, but over time this process will become easier and easier.

In addition, the covers of some mobile devices are fixed with screws, so all screws must be unscrewed to remove the cover.

How to Remove the Samsung Galaxy S8 Back Glass Cover

Phones “Honor”. one of the most popular in the domestic market. Combining advanced technologies and low price, these devices are in demand by many users who enjoy excellent functionality and high quality of their gadgets. While using your Honor, it may be necessary to open its back. This may be due to the need to replace the battery or other relevant reasons. But when we try to open it, we realize that everything is not so simple, and the panel is literally glued to the body of the gadget. What to do? Below we will analyze how you can open the back cover of your Honor mobile phone, and what we need for this.

How to open the back cover of a smartphone

Knowing how to remove the cover from the phone can be useful especially when you need to change the SIM card, insert the memory card, change the battery in case of damage or purchase a new one, etc.

The principle of removing the cover on mobile devices is approximately the same.

What is needed

To open a smartphone, you do not need various kits with devices. It is enough to find the following tools at home:

  • a small screwdriver that fits the screws on the phone case;
  • a suction cup with a handle required to open the panel;
  • any plastic card;
  • hair dryer.

When you find these tools, you can proceed to the analysis of the smartphone.

How to open the cover of Meizu phone

Before you start to open the back cover of the device, you need to pay attention to its material. Some Meizu models have an all-metal case, which is not recommended to be disassembled at home. The manufacturer warned that these models are non-separable, so if they break, you should contact the service center. Otherwise, not only will it not be possible to put the lid back on, but there is a chance to damage the microelements of the device.

Only models with a plastic cover can be disassembled. How to open the cover of Meizu:

  • Turn off the phone.
  • Remove SIM cards and flash drives.
  • At the bottom of the smartphone there are small screws that need to be unscrewed.
  • The case and display are held in place with double-sided glue, so it should be gently warmed up with a hair dryer.
  • Use a suction cup to gently pull the display.
  • Using a plastic card, carefully separate the case and display.

All actions must be carried out as slowly as possible so as not to damage the internal components.

Smartphones of the company with and without a removable cover. list

  • 7A PRO.
  • P20 PRO.
  • P30 Lite.
  • P8 Lite 2017.
  • Y9 2018.

All other modern devices do not provide this function. These include:

  • 8 Lite.
  • P Smart Z.
  • 8 C.
  • Y6 Prime 2018.
  • 6C Pro.
  • 9/9 Lite.
  • P30 Pro.
  • P Smart.
  • Nova 3.
  • P9 eva l19.
  • 6a.
  • 7a.
  • View 20.
  • Y6 2021.
  • 10/10 Lite.

How to open the back cover of Honor and Huawei phones on different models

Smartphones from the Chinese manufacturer Huawei have gained sufficient popularity among consumers. The users named the main advantages as the cost with a combination of sufficient power and functionality. But, modern flagships have a more complex design, which raises the question. how to open the back cover of an Honor or Huawei phone.

What are the back covers made of?

The manufacturer is not limited to one design. So, the back panel can be:

  • Glass / ceramic.
  • Plastic / metal.
  • Leather.

Regardless of the material, the removal instructions will be identical.

with a suction cup

The second option requires a special suction cup and card. The procedure under consideration is easy and involves a number of actions:

  • Use a hair dryer and warm up the back panel.
  • Place the suction cup firmly on the panel.
  • Pull it gently towards you.
  • Insert a thin plastic object into the gap that appeared during the use of this tool.
  • Run it along the entire seam and carefully detach the cover.

If there is a fingerprint, carefully disconnect the ribbon cable with an auxiliary tool.

Replacing and installing a new cover on Honor or Huawei

Follow the same procedure as presented in the article above. When you are finished disassembling the device, attach a new panel. Do not forget to reconnect the fingerprint cable if there is.

Required tools

Disassembly of the device is carried out with different tools. You can remove the back cover from a Huawei or Honor phone using:

  • Phillips screwdriver or Pentalobe (0.8).
  • Cup suction cup.
  • A card or any plate with fine, pointed edges.
  • Thermo hairdryer.
  • Paperclip, key or needle to get a SIM card.

with a plastic key

The first method involves using a small screwdriver and any card. Take the phone with the screen facing down and unscrew the two small screws at the edges near the USB port.

Gently slide a card or any plastic instrument with a pointed and flat end.

If you have any questions or complaints. let us know

Carefully slide it along the seam on the case, and then detach the panel.

How to open the back cover on Samsung Galaxy S7 Edge

Let’s take an example of how specialists open non-removable back covers on a Galaxy S7 Edge smartphone. It is much easier to do this when you have special equipment at hand. It resembles an ordinary vise equipped with a large suction cup.

It serves as a holding tool for the back of the case. No hot air gun is needed with this equipment. Since it refers to methods that have a certain share of the risk of breaking Samsung with a high temperature.

  • In the middle there is a niche for a telephone. The body is placed between two rubber holders of the vice;
  • The cover of the device closes and the suction cup is activated. It is attached to the back of a Samsung smartphone. The joints must be moistened with alcohol or an alcohol-containing solution;

Ultimately, the glue between the parts of the case yields and the device is disassembled into two main parts. the back cover and the Samsung mobile phone module. When the cover comes off the module, you do not need to immediately open the fixture. It is necessary to remove the suction cup from the body, after which you can open the machine.

Method to remove cover on Samsung J5 phone

Recently, developers of mobile phones of various brands have begun to create cases in which the back cover is simply absent. In fact, it exists, but it is not possible for ordinary users to open it without special devices. For example, the two parts of the Samsung J5 are glued together. And in order to glue them, the body must be exposed to heating at a temperature of 100 degrees. This will require a hot air gun.

Before opening the case, be sure to remove the cells for the SIM card and flash drive.

The muzzle of the hot air gun must be directed towards the back of the Samsung and its seams. Then you need to arm yourself with a plastic card or a plastic scalpel to pry the front screen module.

The lid is not a thin plastic sheet, as in classic smartphones, but rather a depression in the form of a bath. You should be very careful when working along the seam of your phone with a card. Don’t run it too deep. 0.5 cm is enough. Be careful not to disrupt important phone modules.

When the lid gives way, do not rush to open the case completely, do it with caution. After all, both parts exchange information using a wide ribbon cable that connects the screen module and the Samsung motherboard.

To disconnect the ribbon cable, you need to open the mount cover and remove the ribbon cable from the socket. It’s pretty simple. The main thing is not to rush and be attentive.

READ  How can you take video from your phone screen

How to open the back cover of a Samsung phone

Let’s find out in what ways you can open the back cover of your Samsung mobile phone. No mobile phone is complete without a SIM card. This is a small chip that provides us with cellular services. On some Samsung models, you need to remove the cover to gain access to the slot where the chip is inserted. And also Micro-SD. a flash drive for a mobile device. Or get to the motherboard for repair.

Removing the cover with the tools at hand on the Samsung Galaxy S9

The more popular model Samsung Galaxy S9 practically does not differ in the process of disassembling the case from other models. Here, all the two components are glued together, as the engineers at Samsung decided. But we will consider manual disassembly of the device, without any special tools. We will use the tools at hand that are in every home. For example, instead of a hot air gun, you can use a regular hair dryer to dry your hair. But use it to its fullest. Direct the hot air flow exclusively at the joints of the case.

It is necessary to warm up the glued joints with a hairdryer for a few minutes. A suction cup is also needed to safely remove the back cover.

    Attach the suction cup to the top or bottom of the Samsung Galaxy S9 case. Gradually start pulling the cover away from the screen module. It’s nothing that at first she won’t give in. Do this regularly but effortlessly. After a while, a gap will begin to appear between the body and the lid;

How to open the cover of Samsung Galaxy j3 2017

First way:

  • The device must be turned off, so press and hold the power button for a few seconds.
  • After that, press and hold the Volume Up Home Power button and hold it for a few seconds.
  • You can release the held keys when the Samsung logo appears on the screen.
  • Then select “wipe data / restore factory settings” from the recovery mode menu. using volume buttons to navigate and power button to confirm.
  • In the next step, select “Yes. delete all user data ”. to confirm the whole operation.
  • When the screen reappears in recovery mode, select the option “reboot system now”.
  • Well done! Hard reset has just been performed.

If you found this useful, click on the Google star, like or follow us on and Instagram

Download mode Samsung J330 Galaxy J3 2017, show

How to enter download mode in Samsung J330 Galaxy J3 2017? How to open download mode in Samsung J330 Galaxy J3 2017? How to start download mode on Samsung J330 Galaxy J3 2017? How to get out of download mode in Samsung J330 Galaxy J3 2017? How to Exit Download Mode in Samsung J330 Galaxy J3 2017?

Everything you need to know about Download Mode in Samsung J330 Galaxy J3 2017. Check out the following download mode guide:

  • First turn off the device by briefly holding down the power button.
  • Then press and hold at the same time Volume down Home Power button for a while.
  • After that, you should see a menu with two options.
  • Select Download mode. pressing Volume Up.
  • If you want to exit boot mode you must use the same keyboard shortcut.

If you found this useful, click on the Google star, like or follow us on and Instagram

Removing the cover with the tools at hand on the Samsung Galaxy S9

The more popular model Samsung Galaxy S9 practically does not differ in the process of disassembling the case from other models. Here, everything is also glued together, the engineers at Samsung decided. But we will consider manual disassembly of the device, without any special tools. We will use the tools at hand that are in every home. For example, instead of a hot air gun, you can use a regular hair dryer to dry your hair. But use it to its fullest. Direct the hot air flow exclusively at the joints of the case.

It is necessary to warm up the glued joints with a hairdryer for a few minutes. A suction cup is also needed to safely remove the back cover.

Samsung Cover Opening Tools

  • Attach the suction cup to the top or bottom of the Samsung Galaxy S9 case. Gradually start pulling the cover away from the screen module. It’s nothing that at first she won’t give in. Do this regularly but effortlessly. After a while, a gap will begin to appear between the body and the lid;
    Attach the suction cup to the Samsung back cover
  • Insert a plastic card or plectrum into it;
    Insert a guitar pick or plastic card into the hole that appears
  • Gradually insert plastic objects into the new holes so that they do not stick together again;
    A pick inserted into the hole between the lid and the Samsung case
  • Move the guitar pick further so that the lid gradually peels off.

In this simple way, you can easily open the back cover on almost any Samsung mobile phone.

How to open the back cover on Samsung Galaxy S7 Edge

Let’s take an example of how specialists open non-removable back covers on a Galaxy S7 Edge smartphone. It is much easier to do this when you have special equipment at hand. It resembles an ordinary vise equipped with a large suction cup.

Cover opener on a Samsung smartphone

It serves as a holding tool for the back of the case. No hot air gun is needed with this equipment. Since it refers to methods that have a certain share of the risk of breaking Samsung with a high temperature.

  • In the middle there is a niche for a telephone. The body is placed between two rubber holders of the vice;
  • The cover of the device closes and the suction cup is activated. It is attached to the back of a Samsung smartphone. The joints must be moistened with alcohol or an alcohol-containing solution;
    Attaching the Suction Cup to the Back Cover of Your Samsung Smartphone
  • The pressure regulator, which is located on the right, comes into play. When twisting it, the smartphone body is held by a rubber vise, and the suction cup “pulls” up;
    Pressure regulator in the fixture
  • The adjuster is hand-tightened, but does not tighten tightly, as we are dealing with a fragile material. We tighten the regulator every few minutes.
    Samsung smartphone open case

Ultimately, the glue between the parts of the case yields and the device is disassembled into two main parts. the back cover and the Samsung mobile phone module. When the cover comes off the module, you do not need to immediately open the fixture. It is necessary to remove the suction cup from the body, after which you can open the machine.

Hard reset (Samsung J327P Galaxy J3 Emerge)

FACTORY RESET via Samsung J100F Galaxy J1 settings. GUIDE. video

How to Factory Reset Samsung Galaxy J3 Prime. Delete data / Master reset | HardReset Information. video

How to Hard Reset Samsung Galaxy J3 Prime. Bypass Screen Lock / Erase Data | HardReset.Info. video

REMOVE SCREEN LOCK / HARD RESET: Samsung J100F Galaxy J1. video

Replace the plastic cover and screw

To secure everything in place, start by putting the small plastic cover back in place.

Then, since the screw is very tricky, just grasp the head with tweezers. Carefully guide the screw back into the hole with little or no pressure and letting gravity do most of the work for you.

The screw should slide back into place relatively easily.

The screw can now be safely screwed into place.

Tighten it very carefully as it is a metal retainer that fits into the plastic port. When the screw offers any resistance, turn the screwdriver an additional 1/8 turn. Basically, just fix the error.

How to replace the charging port of a Samsung phone

WARNING: Repairs can be difficult, especially if you are inexperienced. Before you start, understand that you are at risk of additional damage and may void any warranties and insurance policies.

On older models like Samsung Galaxy S1. S5, Galaxy J1. J3 and Galaxy Note 1. Note 4, you usually need to do the following to access the charging port:

  • Remove the back cover, SIM card and microSD card
  • Remove the battery
  • Unscrew the middle frame and disconnect the various cables and screws
READ  The difference between Samsung Note 10 and Note 10

On newer phones like the Galaxy S6. S10, Galaxy Note 5. Note 10 and Galaxy A models A3, A5 and A9, as well as some Galaxy J models, you usually need to do the following to access the charging port:

  • Heat rear window
  • Remove the rear window using a suction cup and a pry tool
  • Disconnect the various cables and screws

4 Ways to Recover Data from Samsung with Broken Screen

A broken or dead Samsung smartphone screen is never welcome. Worse, I don’t know how to recover data from broken Samsung screen. In this article, we will discuss 4 solutions to fix Samsung screen not working in different situations.

How to Backup Samsung Galaxy with Broken Screen When You Can’t Unlock Phone?

If it happens that you hacked the screen of your Samsung S10 / S9 / S8 / S7 / S6 / S5 and cannot unlock your Galaxy, you can remove the password and lock your Samsung Galaxy with Samsung Find My Mobile

  • Go to the Find My Mobile website and sign in with your Samsung account name and password.
  • Click the Sign In button to sign in to your Samsung account.
  • Select the “Lock Screen” section on the left panel.
  • Enter a new PIN to unlock the Galaxy screen when prompted.
  • Click “Lock” at the bottom of the screen.
  • Wait a few minutes, the PIN you just set in the web browser can be used to unlock your Samsung Galaxy.
  • Then you need to back up files from your Samsung Galaxy using Samsung KIES.

(1) To use Find My Mobile, you need to set up a Samsung account on your Galaxy phone and sign in to it.

(2) Find My Mobile can even back up your Samsung Galaxy to Samsung cloud and erase all data stored on the device.

(3) Find My Mobile is not available on Samsung Galaxy S3 / S2.

Check out how to backup Samsung Galaxy:

Professional cell phone repair

Expect to pay anywhere from 50 to 90 for a professional Samsung charging port replacement, depending on your model and service chosen. It is recommended that you check if your repair shop offers any warranties for parts and labor. You should also inquire about the experience, credentials and quality of parts of your service engineer.

Here are some examples of pricing for professional Samsung charging port replacement services:

Ready to sell? Many broken phones cost over 100 Determine the value of your phone.

Note that the charging port is soldered directly to the motherboard on older models such as the Galaxy SII and Galaxy SIII. If you have experience in soldering, you can separate the charging port from the motherboard to replace it as shown in the video below.

On newer models, the charging port is sold either as a separate piece or as part of a flex cable (also known as an assembly or, in some cases, a daughter board). While it is possible to replace the standalone charging port with soldering, it is usually easier to replace the entire flex cable. This will also ensure that the charging port is completely repaired if the issue is with the flex cable itself.

And here’s how to replace the charging port on your Galaxy S9:

Recover data from broken Samsung screen. How to Recover Data from Samsung Galaxy with Dead / Black Screen?

If your Samsung phone does not have a screen working, meaning the device is working, but you cannot turn it on to work with it, then you will need a third party app that can sync your phone and computer to create a backdoor. for data recovery. Broken Android Data Recovery or similar software compatible with Samsung phones. However, let’s stick with the first one and see how you can use it to recover data from Samsung phone with dead / black screen.

Key Features of Broken Android Data Recovery:

Now download the powerful software and follow these steps to start the process.

samsung A10 back cover open | Pardeep Electronics

Connect Samsung Phone to PC with USB Cable.

Download and install Broken Android Data Recovery on your Windows computer. After that, launch it and connect your Samsung phone to your computer with a USB cable. You don’t need USB debugging for this.

Step 2: choose the correct mode for data recovery.

In the software window, select Broken Android Data Extraction in the left pane. After that, you will find two options in the right interface: one is for retrieving data from a device with a non-working screen (dead or broken), and the other. in case of damage to the telephone system itself. For our purpose, click the “Start” button under the first.

Offer the program information about your device.

On the next screen, you will find two data fields: device name and device model. From the drop-down menu next to each, select your phone and its model number. Then check the box “I agree” and click “Confirm”.

Enter download mode.

Now you need to enter download mode. The program will download the hotfix package to your phone to fix the problem with your phone and get it back to normal. For this:

(2) Press and hold the Volume Down, Home / Menu and Power buttons at the same time.

(3) Press and hold the volume up button.

Recover Data from Broken Samsung Galaxy.

Once you have entered download mode, click “Start” and the program will start scanning. When complete, you will see an interface with all the different categories of data listed on the left. Select them in groups or as separate data and click the “Restore” button in the lower right corner to create a backup on your computer.

The software only supports Samsung Galaxy S5 / S4 / S3, Galaxy Note 5 / Note 4 / Note 3, Galaxy Tab Pro 10.1. You can check similar models on this page:

How to Recover Data from Android Phone with Broken Screen?

Samsung Galaxy models with adhesive covers

New Samsung Galaxy phones have back covers that are held in place with adhesive. These include Galaxy S models from S6 to S10, Galaxy Note models from Note 5 to Note 10 and Galaxy A models A3, A5 and A9, as well as some Galaxy J models. Their back covers can still be removed, but the process is a little more complicated:

  • Use a hair dryer to heat the back cover and loosen the glue underneath. Be sure to heat the edges, not the middle of the device.
  • Place the suction cup on the rear window, then lift up by prying the side seam with a pick.
  • Run your pick along the seam to separate the back cover from the frame until it is completely removed

You can get step-by-step instructions on how to remove the back cover of your Samsung Galaxy on sites like iFixit and YouTube (if you can’t find specific instructions on how to remove the back cover, search the Samsung Galaxy guide on how to remove or replace the battery).

| Contacts | Content | RSS