Screen goes blank while listening to voice messages

20 most common iPhone breakdowns Everyone needs to know

screen, goes, blank, listening

There are a number of iPhone breakdowns that are all too familiar to the employees of all smart service centers. With such problems, users of Apple smartphones turn to repair literally every day and, according to trends, this will definitely not stop in the near future. We interviewed the experienced craftsmen of the iMobi SC and compiled a list of the 20 most frequent iPhone breakdowns. It is important to know them, although in order to try to avoid them.

❗ You should not repair your smartphone on your own, as this can only exacerbate the problem. It is highly recommended to take the device to a service center, where you will be repaired professionally and with a guarantee.

Save the article to bookmarks so as not to lose it! It will be useful to you

Face ID does not allow you to enter a face or gives an error

When you try to register a new face, the camera is periodically out of focus and messages appear asking you to raise or lower the camera.

The malfunction may be caused by a break or cut in the loop. In addition, face recognition can completely fail due to moisture ingress (one drop is enough).

It is impossible to repair this breakdown. Therefore, it is recommended that you always check the functionality of the Face ID function when buying an iPhone hand-held. If a similar problem manifests itself on a recently purchased iPhone, such a smartphone should be returned under warranty.

11. No network (or Wi-Fi / Bluetooth)

The phone sees the SIM card, but it always says “No network”, it is impossible to connect to Wi-Fi or Bluetooth.

The modem’s microcircuit “got off”, usually this happens after a fall.

It is easiest to identify a microcircuit malfunction in the “Settings”. “General”. “About device” menu, where you should check for the presence of the modem firmware, Wi-Fi and Bluetooth. If they are absent, then it is necessary to restore these microcircuits.

There is one nuance with regards to the modem. The modem microcircuit will work only with the native one, it’s like with a fingerprint scanner. only the native spare part works. There are times when the modem microcircuit simply dies after falling, and no matter how much you reinstall it on your contact pad on the board, the network will not catch. Accordingly, the chances of a successful repair are 50 to 50.

If the Wi-Fi and Bluetooth switches are inactive, you need to change their microcircuits.

Working time about 2 hours.

The recorder does not work and voice messages are not recorded

Voice recorder stops activating on iPhone. no voice memos are recorded.

The audio codec is out of order, most often this happens when the device falls.

Working time about 2 hours.

iPhone works, but no image

The smartphone itself is turned on, calls go through and you can even enter applications from memory, but the screen is black and there is no image.

The problem occurs due to drops and damage to the internal components of the phone. The breakdown lies either in the display or in the image controller chip, which is located on the motherboard.

Display or image controller replacement required.

depending on the model. Working time 15 minutes.
depending on the model. Working time about 1.5 hours.

20. On the screen there is an error: “iPhone is disabled. Connect to iTunes

When turned on, a cable is drawn on the screen and the inscription “iPhone is disconnected. Connect to iTunes “.

As a rule, multiple mistakes when entering the lock password.

Phone flashing with data deletion required.

Working time. up to 1.5 hours.

Main camera and flashlight do not work

When trying to take a photo, a black screen. Flashlight button is inactive.

The reason lies in the disconnection of the main camera cable when the iPhone is dropped. A non-working camera pulls a flashlight along with it.

The fix involves connecting a loop of the main camera, after which both the camera and the flashlight begin to work.

Working time. 5 minutes.

How to save a voice message from Whatsapp

All voice messages are stored in a backup copy on virtual media or in the phone memory if this feature is enabled. All previously sent recordings can be listened to by opening the dialogs where they are contained. The entire history of correspondence, along with audio files, can be sent to your email address. this is the best way to quickly access the desired recording.

Whatsapp voice messages not sending

The most common reason for an error sending a message is when the application is denied access to the microphone. Allow access when the program is requested and start recording.

Since this feature is relatively new, it is possible that your version of the application simply does not support this feature. Please update the app and try to record.

If the recording is interrupted every time after a few moments, this may be due to the feature of the phone’s multi-touch display, the presence of a protective film or glass on the screen. Remove protection from the screen and, if possible, edit the sensitivity of the sensor in the settings. This will help you record longer messages.

How to record a voice message on WhatsApp

Recording voice messages on WhatsApp is very simple. the entire application interface is built on an intuitive principle of use, and voice messages are no exception. In previous versions of the program, the microphone icon in the lower right corner of the screen was used for recording, with the latest update, changes came: it became possible to continuously record for 15 minutes without having to hold down the microphone icon. Click on the paper clip icon (“Attach file” function), then on the “audio” section.

A window will appear with options to choose from: send an audio file on the phone or record your own. Choose the second option and record your message. at this point, you can minimize the application and keep it in the background. To complete it, click the “Stop” button.

Whatsapp. all about voice messages

Whatsapp is an innovative application that makes communication between people easier and more accessible. To make this process even easier and faster, start voice messages in Whatsapp. This will allow you to quickly respond to any message.

How to delete voice messages on Whatsapp

You can delete a failed or mistakenly recorded message right away by clicking the “Cancel” button. After sending, you can delete it like a regular text entry. hold down the message and in the context menu that appears, click “Delete”.

If you do not have backup storage of files connected, messages will be deleted as the memory becomes full.

READ  How can I wipe the TV screen

How to send a voice message on WhatsApp

Sending a voice message will start after the file is recorded by pressing the “Stop” button or after releasing the microphone icon. Before sending the entry, you can cancel. to do this, press the corresponding button on the screen. A voice message can be deleted after sending, just like a text message, before the user listens.

There are colored indicators for WhatsApp voice messages. If the received recording is listened to, there will be a blue microphone next to it, if not, a gray one. When the other party listens to the message you sent, the icon turns green. If he did not have time to listen to it, the icon will be blue.

How to recover Whatsapp voice messages

If messages have been deleted from dialogs, there are several ways to restore them. If the data was deleted earlier than a week ago, it will be easy to restore it: reinstall the application on your phone and the program will offer you to restore information from the backup.

If more time has passed, you will have to find the file with the data saved in it yourself. If the storage location is set to phone memory, the information is saved in the WhatsApp / Databases folder by default. Find it. it will contain folders with saves, separated by date. If you remember the date when the message was created, look for it in a folder with this name.

Sensor check

But what if you suddenly notice that the proximity sensor on Android has stopped working on its own? A system failure is possible, in which all the standard settings are lost. This can happen due to a fall of the device, download of malware, and so on.

How to check the proximity sensor on Android, the easiest way:

  • Go to the call section of your smartphone.
  • In the lower right corner, click on three dots and you will see available options for action.
  • Click on the “Settings” button and you will be redirected to the control panel.
  • Go to the “Incoming Calls” section.
  • Scroll down the page to the Proximity Sensor and check the position of the slider. If it is gray, then it is off, move the slider to the right. If it is highlighted, then it is working properly.

Another way is to view the status of the option through the engineering menu. How to check with this method:

  • In the dialing menu, enter the combination ### and a list will immediately open in front of you.
  • Scroll through the available options to the Hardware Testing tab.
  • Next, select the “Sensor” item and click on it to go.
  • Click on the “Light / Proximity Sensor” option.
  • Further “PS Data Collection”, you will be redirected to the next window, where you can check the operation of the option.
  • To check, click on the “Get One Data” button, and enter the number zero in the second line.
  • Place your hand on the screen and press the GOT button again.
  • If the number 255 appears, then the option is working properly.

Through the installation of special programs

First, let’s look at shutdown using the Smart Screen on / off program. To do this, follow these steps:

  • Find the program in the Play Store and install it.
  • After successful installation, open the application and click on the “OK” button to allow access to the device.
  • You will be redirected to the next page, where you need to click the “Activate” button.
  • You will be redirected to the main page of the application, where you need to move the largest slider to the left to disable the proximity sensor. It should turn red.

The last way to disable is through the Sensor Disabler app. To use this shutdown method, follow these steps:

After saving the data, the parameter setting will be saved.

Through the settings of your smartphone

To turn off the option via smartphone settings, follow these steps:

  • Go to the settings section of your smartphone and scroll down to the “System applications” section.
  • Find “Calls” among the available applications and go to the section to view detailed information.
  • Among the listed options, find “Incoming Calls” and click on the line to go.
  • Find the item “Proximity sensor” and click on it so that the slider turns gray. This means that it will be disabled.

How to turn on the proximity sensor

If you want to enable the option on your smartphone, you can use the same methods that are intended to disable it. How to enable proximity sensor on Android:

  • Through the call settings on the smartphone.
  • Through third party applications.

To do this, you will need to follow the same steps as indicated above, but to enable the slider must be green / blue, depending on the peculiarities of the color solution of the software of your device.

Disconnection methods

If the sensor bothers you during calls, opens other applications at the same time, dials other numbers or stops working, then it can be disabled at the request of the owner. In what ways can you disable the proximity sensor on smartphones with Android:

  • Through the settings of your smartphone.
  • Through the installation of special programs. 2 programs will be considered. Smart Screen on / off and Sensor Disabler.

We will analyze all the methods so that you can use the most suitable one. The options will be considered on the Android version from 9.0 Pie. The installed firmware can be checked by going to the “System” section in the settings and then “About the phone”. The line “Android version” will indicate the current.

How to disable, enable, configure the proximity sensor on Android

The proximity sensor is located on the working side of the smartphone. It determines how close the object is to the screen. When it is brought too close to the face, it reads the information and turns off the screen for a while so that the user does not accidentally click on the applications on the screen. This option is especially relevant during a call. But what to do if the sensor is no longer needed, how to disable the proximity sensor on Android, it is faulty or needs to be checked?

Proximity Sensor Calibration

If, after checking, the sensor is triggered once, turns off, locks the screen on its own when listening to voice messages, then you need to calibrate the proximity sensor. To do this, you need to install the app of the same name from the Play Store.

READ  How to keep the phone screen from turning off

How to set up the proximity sensor on Android:

  • Open the app after installing it.
  • Click on the “OK” button, agreeing to the user agreement and you will be redirected to the main page of the application.
  • On the main screen, click on the single big button “Fix It”.
  • An instruction will appear in front of you. Follow all the steps indicated in it in order to properly configure the operation of the option. First step: Second step: Third step: Fourth step:
  • After completing the calibration of the proximity sensor on Android, click on the “OK” button to complete and confirm the actions.

If, during calibration, do any of the actions incorrectly or a failure occurs, the application will offer to go through all the configuration steps again.

After successful completion of the procedure, restart your device so that the settings take effect and you do not experience any inconvenience when working with your smartphone. But if after that the problems in the operation of the options remain unchanged, then contact the service center, because the problem is most likely in the device itself.

Volume

Can’t play a WhatsApp voice message, can’t listen to it even though you keep pressing the play button? Have you checked if the sound is turned on on the phone? We advise you to do the following:

  • Open the audio file and run it;
  • Press the volume up button;
  • Be sure to watch the screen. a sound indicator should appear.

Everything worked out? Congratulations! If the smartphone still does not play audio, we recommend cleaning the speakers.

  • Turn the phone over and check if the holes are clogged with dust;
  • Remove dirt if necessary with a soft dry brush.

Couldn’t fix the speaker breakage yourself? Contact the service center!

Can’t Listen to Voicemail on Whatsapp: Troubleshooting

Are you asking the question “I can’t listen to a voice message on Whatsapp”, do you constantly face difficulties? We can help you. after a thorough analysis of the problem, effective solutions were found. Read them in our article. everything is described in detail and clearly, even a beginner will figure it out.

No permission

If you are wondering why WhatsApp does not load voice messages, the first step is to understand if the program has been given permission to use the microphone. When you turn on the Whatsapp messenger for the first time, it asks for access to the audio headset. you may not have given the appropriate rights. Fix?

  • Go to the list of applications and find the messenger;
  • Click on the microphone icon and move it to the “On” position.

Pay attention! Menu item names may differ depending on the phone model.

We have analyzed the first reason why audio files cannot be opened or listened to. Moving on to the next problem?

Motion Sensor

Screen keeps going blank while listening to Whatsapp voice messages? Perhaps the problem lies in the motion sensor, which was accidentally blocked.

  • When the smartphone is brought to the ear, the screen turns off. this is done for the convenience of the user;
  • If you cover the top of the phone with your hand or finger, the sensor is deactivated;
  • Take your hand off and try to start recording again.

This is a common reason why it is impossible to listen to a voice message on Whatsapp. as you can see, it can be solved in the blink of an eye. There are other options, let’s consider them in more detail.?

Headset connected

The last obvious reason why audio files on Whatsapp are not downloaded or listened to is the parallel connection of another device. Make sure there are no headphones or other devices in the inlet.

We have analyzed the main problems that lead to the fact that voice messages in Whatsapp are not being listened to. Save our review to bookmarks so as not to lose useful and necessary tips and not to complain “I can not listen to the voice message in Whatsapp”!

Why the screen does not light up when listening to messages in WhatsApp

WhatsApp has earned popular love due to its simple, user-friendly interface, reliability and high-quality communication. these are three factors that allowed the messenger to win the first positions and become the most widely used in terms of coverage of subscribers in the world. However, the ointment was not without a fly in the ointment: from time to time there are minor technical problems that cannot be solved right away. One of these is directly related to voice messages.

Volume

One of the most common problems: often users switch their mobile device to silent mode and happily forget about it. Accordingly, at the time of listening to a voice message, an error occurs.

  • Try disabling silent mode through the drop-down curtain (called by swiping down), or through the device settings.
  • Deactivate the “Mute” button.
  • Play any music file on the device and check the sound through the volume rocker.
  • If the sound indicator appears at the top of the screen, everything is in order.
  • Now voices should be played normally.

If the sound is not restored, then the problem is in the speakers, which need to be thoroughly cleaned with a dry brush. In some cases, the inability to play an audio file is due to lack of space on the device.

Reasons and solutions

Recently, more and more complaints have been received that on most smartphones and tablets, regardless of the brand and model, the screen goes blank when listening to WhatsApp voice messages, in some cases the sound disappears. After a thorough analysis of the situation, the following ways of solving the problem can be distinguished:

Motion Sensor

In some cases, the problem with the screen while working with WhatsApp and receiving voice messages is associated with a blocked motion sensor. The reason may be due to the following factors:

  • The user raised the smartphone to his ear to listen to the voice message.
  • The user accidentally covered the top of the phone with his hand, or with a separate finger.
  • The user has placed the phone on a tabletop or similar flat surface while receiving a message.

Solution to the problem: try listening to the voice message through the speakerphone without unnecessary touches to the device.

No permissions

Unfortunately, not all people are advanced users of modern gadgets. Often, users go through the installation of software without delving into the nuances, thereby blocking the access of applications to the hardware of the device. To give WhatsApp the necessary permissions, you need to consistently do the following:

  • Go to “Settings” (depending on the brand of the phone, it is located either directly on the main screen along with the main applications, or it is called up with a swipe).
  • Go to “Applications”.
  • Find the Whatsapp client in the drop-down list and go to the “Permissions” tab.
  • Check what permissions the application lacks for full operation (you need to give access to the microphone, camera, contacts, and so on).
READ  How to Capture Video from Honor Phone Screen

Depending on the brand of the phone (Xiaomi, Samsung, OnePlus), the procedure may differ slightly, but the essence is the same. Also, in some cases, the microphone can be occupied by a third-party application with the appropriate permission. Sometimes blocking access to the microphone from other applications can fix the problem.

Connecting a headset

The last obvious problem with WhatsApp audio production is the parallel connection of third-party devices. For example, headphones, or portable audio (bluetooth speaker). In this case, you need to turn off third-party equipment and double-check the quality of the Internet connection.

Often, conflict-related audio problems are due to a technical malfunction of the device. In this case, you need to restart the phone and try to play the audio file through the messenger again. Sometimes, in some cases, the problem may be on the part of the WhatsApp client, the cache of which needs to be cleared, or even reinstall the application.

Mi Comm APP

Receive news about Mi products and MIUI

Volume

Can’t play a WhatsApp voice message, can’t listen to it even though you keep pressing the play button? Have you checked if the sound is turned on on the phone? We advise you to do the following:

  • Open the audio file and run it;
  • Press the volume up button;
  • Be sure to watch the screen. a sound indicator should appear.

Everything worked out? Congratulations! If the smartphone still does not play audio, we recommend cleaning the speakers.

  • Turn the phone over and check if the holes are clogged with dust;
  • Remove dirt if necessary with a soft dry brush.

Couldn’t fix the speaker breakage yourself? Contact the service center!

Motion Sensor

Screen keeps going blank while listening to Whatsapp voice messages? Perhaps the problem lies in the motion sensor, which was accidentally blocked.

  • When the smartphone is brought to the ear, the screen turns off. this is done for the convenience of the user;
  • If you cover the top of the phone with your hand or finger, the sensor is deactivated;
  • Take your hand off and try to start recording again.

This is a common reason why it is impossible to listen to a voice message on Whatsapp. as you can see, it can be solved in the blink of an eye. There are other options, let’s consider them in more detail.?

Why does the screen go blank when listening to a voice message

Hello.
If the voice message in Whats App is poorly heard and the screen goes blank, add the program to the sound settings.

Settings. Sounds and vibration. Advanced sound settings. Separate audio from the app. Enable. Application (add Whats App). Sound device (telephone)

Thus, I solved the problem in my Samsung Galaxy A9. I would be glad if my comment helps someone.

Today I listened to a voice message in VK, accidentally closed the light sensor and the screen went out, and the sound was played in the auditory dynamics, what kind of shit is with Andrey?

how is it ok? before this was not, took from his wife Xiaomi, she does not have this

This happened after the update?
If so, then it is better to synchronize all data and save the media files on a USB flash drive and reflash Smart.
P.S. The most reliable way.

Dmitry Maltsev
This happened after the update?
If so, it’s better to syn.

This may be due to the fact that you are covering the proximity sensor (if you do not know that this is Google for help)

I know that I was closing the sensor, I want to find out why this is happening, because before this was not in more than one version of Andrey

it should fade out only after covering the sensor

RUS102
how is it ok? This was not the case before, I took it from my wife with.

This is the role of the proximity sensor. When you talk on the phone, you cover it with your ear, the screen turns on so that you do not accidentally press the button on the screen with your ear

Karma li
This is the role of the proximity sensor. When you.

but I didn’t talk. I listened to the recording in the message in VK, and accidentally closed the sensor and the screen went out, the sound disappeared in the speaker, and started playing in the auditory

No permission

If you are wondering why WhatsApp does not load voice messages, the first step is to understand if the program has been given permission to use the microphone. When you turn on the Whatsapp messenger for the first time, it asks for access to the audio headset. you may not have given the appropriate rights. Fix?

  • Go to the list of applications and find the messenger;
  • Click on the microphone icon and move it to the “On” position.

Pay attention! Menu item names may differ depending on the phone model.

We have analyzed the first reason why audio files cannot be opened or listened to. Moving on to the next problem?

Recommendations

It is recommended to upload cover images with 720312 resolution

Are you asking the question “I can’t listen to a voice message on Whatsapp”, do you constantly face difficulties? We can help you. after a thorough analysis of the problem, effective solutions were found. Read them in our article. everything is described in detail and clearly, even a beginner will figure it out.

Headset connected

The last obvious reason why audio files on Whatsapp are not downloaded or listened to is the parallel connection of another device. Make sure there are no headphones or other devices in the inlet.

We have analyzed the main problems that lead to the fact that voice messages in Whatsapp are not being listened to. Save our review to bookmarks so as not to lose useful and necessary tips and not to complain “I can not listen to the voice message in Whatsapp”!

BICBON.COM 2021