Use your TV as a monitor for your computer
HDMI / DisplayPort
The HDMI interface is used to connect media players, game consoles and other equipment. The HDMI port can transmit high-quality, high-definition video, coupled with an audio track, and with almost perfect response.
DisplayPort is the next generation of interfaces developed by VESA. For connection to the system unit, this is an ideal option that meets all modern technological trends. Both interfaces are quite common, especially HDMI. DisplayPort is found only on new technology, so not every TV can be connected to a laptop or PC video card.
How to connect TV to PC via HDMI or DisplayPort:
- We insert the plug into the TV on one side and into the video output on the PC on the other side (video card, laptop port).
- Call the technical menu on the remote control by pressing the Input button (a similar action can be performed through the TV settings).
- Select HDMI or DisplayPort as the main signal source.
- It takes a few seconds for the technician to accept the connection, after which the PC screen switches to the TV screen.
Sometimes it may take longer to sync. It depends on the TV firmware and the video card of the computer. If the picture is displayed incorrectly, then you should configure the parameters on the PC.
- Call the context menu by right-clicking on the desktop.
- Selecting “Screen Options”.
- In the section “Multiple displays” we set the nominal resolution of the TV.
Here, in the additional parameters, you can adjust the screen refresh rate and set other presets. If the TV is not defined as a second monitor, then you need to press the “Find” button.
This is the most stable and simplest option. It does not require any specific settings and works great as is. You can connect a TV to a computer instead of a monitor in several ways: via DVI, VGA, HDMI or DisplayPort.
This tandem has its pros and cons. Among the obvious advantages, first of all, we can single out the screen diagonal. For average monitors, this figure ranges from 17-24 “, while for TVs. in the region of 30-40”.
It is much more convenient to work with multimedia content, documents and play games on a large TV screen. But this approach has its drawbacks. In a good half of the cases, TV equipment is devoid of any adjustments, that is, it is static. and that’s it. Whereas the position of the monitor can be changed. vertically and / or horizontally.
In addition, the TV is much heavier than a computer monitor, as well as larger. Using the TV as a monitor requires more desktop space. A device with a diagonal of 30 inches must be located more than 50 cm from the user’s eyes, otherwise he will not be able to capture everything that is happening on the screen. Not all computer desks meet these criteria.
There are two ways to connect the equipment. by cable and by means of wireless protocols. Let’s analyze them in more detail.
You can also connect your phone to a TV via WI-FI or via a local network using a DLNA server. The ideal option is to adopt Miracast or WiDi (Wireless Display) technology: there is no fundamental difference between them. For the latter to work correctly, you need a Smart TV and PC format on the Windows 8 or higher platform. The equipment must be connected to the same Wi-Fi network.
Connecting TV to PC via Miracast or WiDi:
- Open the “Network” item in the TV settings.
- Click on the line Miracast / Intel’s WiDi.
- Move the slider to the on position.
- Download and install Intel Wireless Display drivers on the PC (freely available).
- In the settings of the utility, select “Devices” and “Detect”.
- Click on the TV model and wait for the end of the synchronization.
You can connect your TV to your computer via a DLNA server. There are more than enough special utilities for organizing the latter on the Web. The Home Media Server program has proven itself especially well. Let’s consider synchronization using its example.
Connecting TV to PC via DLNA Server:
- Installing the utility on a PC.
- We go into the settings and click on the item “Devices”.
- Start searching for equipment for synchronization.
- Choose a TV model from the list that appears.
- Go to the section “Media resources”.
- Click on the “Add” button and designate all disks or individual folders that will have access to the TV.
- We save the changes by clicking “Apply”.
- On the main screen of the program, open the appeared media server and click on the “Start” button.
- On the TV, we select the LAN protocol as the signal source, after having connected the cable from the TV to the corresponding connector on the PC.
- Now all playable content on a PC from the above discs or folders will be broadcast on TV.
We use the TV as a monitor for the computer
Today’s TV technology works perfectly in tandem with other modern devices, including a PC. You can safely use your TV as a computer monitor. It remains only to figure out how to properly connect and configure it. Many beginners have serious problems with this procedure.
- Right-click on the speaker icon at the bottom of the interface.
- We find the item “Playback Devices”.
- In the list provided, in addition to PC speakers, there must be a TV model.
- Select TV with the right mouse button and click on “Use as default”.
- We save the changes by clicking on the OK button.
DVI / VGA
Ports have long lost their relevance, and you can find them on old equipment. The VGA interface transmits only an analog signal, while the DVI port can also work with digital broadcasting. The capabilities of the latter are indicated by the corresponding prefix:
- DVI-I is a universal option;
- DVI-D. digital broadcast only;
- DVI-A. analog only.
If your TV has a DVI port, and your computer has VGA, or vice versa, you can use an adapter.
- We insert the video plugs into the corresponding interfaces.
- We connect the audio cable to the Audio-In port.
- In the TV menu, set DVI or VGA (sometimes D-Sub) as a signal source.
If necessary, adjust the image on the PC according to the instructions above.
Disadvantages of wireless technologies
Despite the convenience of wireless protocols, they also have serious drawbacks. When working with the aforementioned technologies, braking and freezing are often observed. In addition, the output picture quality does not always meet the stated requirements. Unpleasant “soap” or artifacts may appear.
Advice! If we are talking about the game side of the issue, where you need a good screen response and normal visualization of dynamic scenes, then it is better to stay with a wired connection. In other cases (movies, music, web surfing), you can turn a blind eye to these shortcomings.
How to use (set up) a TV as a monitor
New generation electronic devices are manufactured in such a way that they can interact with each other if necessary. This is done in order to simplify the process of operation by the user. A striking example of such collaboration was the use of a TV as a monitor. A TV receiver connected to a PC is capable of displaying any information output to it.
Many will wonder: why connect a TV as a monitor. There may be several reasons for this:
- failure of a stationary computer monitor;
- comfortable viewing of films on a large high-resolution screen;
- the need to make a presentation to a large audience;
- computer games with gamepad.
As you can see, such a need can arise for almost every user. Using your TV as a computer monitor will give you a home theater experience in your room. Streaming TV does not spoil its customers with high quality content. But from a PC you can stream 4K and Ultra HD video files to the big screen.
How to use a TV as a monitor
The process of connecting a TV receiver to a computer should not cause difficulties and will be clear to every user. The most common way to do this is by cable connection. You just need to first study all the external interfaces of the computer and TV and find the same connectors. There are several types of video outputs:
- VGA is an obsolete type of connector that is used to transfer images;
- DVI is a more modern interface for transferring graphic content. Separate audio cable required for audio playback.
- HDMI is a universal connector that allows you to transfer high quality video and sound to other devices.
All devices of the latest generation have HDMI output for transferring graphics and audio files. After connecting the cable to your computer and TV, you need to make simple settings. To do this, go to the outputs section in the TV receiver menu. There, among the proposed options, we activate the method used (in most cases, this is HDMI output).
On the computer, you need to go to the screen settings menu and select the TV monitor as the main display. It is better to set the resolution recommended by the system, and if necessary, a more accurate image correction can be made in the TV receiver menu. We save the changes made by pressing the “Apply” and “OK” buttons. After that, you can use the TV as a monitor.
How to connect a TV instead of a monitor via Wi-Fi
A wireless connection between a TV and a computer is much more convenient than a cable one. Firstly, the length of HDMI or other cable is limited and forces you to place the system unit or laptop in close proximity to the TV screen. Secondly, fewer cables will be involved, which makes the appearance more attractive.
It is important to remember that for comfortable viewing of high-definition video, a data transfer rate of 30 Mbps or higher is required. There are three ways you can set up your TV as a monitor over Wi-Fi:
- Establishing a DLNA connection. This method allows information to be transmitted wirelessly within a home LAN. To do this, you need to enable network discovery and file and folder sharing in the PC settings. You can activate this feature in the “Network and Sharing Center”. Then, in the TV menu, you need to select the wirelessly connected device.
- Via WiDi software (Miracast). This utility is a home media server with which it is very convenient to duplicate the playback of any content to external devices via Wi-Fi.
- Using an external Wi-Fi adapter. This method allows you to establish a wireless network between your computer and TV. It is applicable for TV receivers that do not have their own integrated Wi-Fi adapter.
Benefits of using a TV instead of a monitor:
- improved image quality;
- larger screen diagonal;
- the ability to use a TV receiver as an additional monitor;
- convenient for computer games with a gamepad.
Disadvantages of using a TV instead of a monitor:
- inconvenience in working with a PC in close proximity to a large TV;
- increased eye strain;
- when working in graphic editors, the TV screen is not able to convey a picture of high detail;
- most of the Internet content is not adapted for large monitors.
TV as a monitor: pros and cons
If you have not yet decided and are just thinking about whether to use the TV as a laptop or computer monitor, then you should definitely familiarize yourself with the pros and cons of such a solution. Let’s list the points that deserve special attention.
- On the modern TV market there is a wide range of TV models with screen diagonals by an order of magnitude larger than for monitors. Thus, the image on the TV screen will look more impressive, which is especially important for fans of video games and movies, because the immersion effect is amplified many times over.
- The TV can be used both as a main monitor and as an additional monitor. It all depends on how you use the additional screens in the “Screen Resolution” settings of your computer. Big screen TVs are much cheaper than monitors.
- Large screen sizes create some inconvenience if you often have to work at a laptop or computer. you need to constantly turn your head to the area of the screen you need.
- This option is not suitable for working with graphic images. The TV screen is not able to convey the image accuracy necessary for such a delicate work.
- It is not always convenient to work with such a monitor on the Internet. Unlike watching video clips, switching from site to site is not very convenient, since they are not always responsive and in some cases will not look very attractive on such a large screen.
5 easy steps to use your TV as your primary monitor
If you have never used your own TV as a monitor, then you have lost a lot. Most modern TV models are very easy to connect to other devices. If you do not go into details, then for this it is enough to determine the type of cable with which the connection will be made, and configure the two devices connected to each other accordingly. Following the simple instructions that will be indicated in this article, you can, after spending just a few minutes of personal time, connect and set up your TV and computer.
Why is the number of people deciding to use a TV as a monitor for a computer or laptop growing? Here are some common reasons:
- The need to obtain a more “large-scale” and “spectacular” picture. This is especially true for moviegoers and for those who like to spend time playing computer games. Select TVs here
- Lack of a monitor. This solution allows you to find a way out of the situation if there is no computer monitor, especially since monitors can be many times more expensive than TVs at their cost.
- The need to use a laptop as a stationary computer or the need to connect an additional monitor. This is an important point, because, after making the appropriate settings, you can use the TV as a laptop, while not duplicating screens, but expanding them, which allows you to get two desktops between which you can move the mouse cursor.
The very connection and configuration of devices will not take much time, just follow simple instructions.
As you understand, there are many additional advantages in working with a computer connected to a TV, but do not forget about some inconveniences. In order to weigh all the pros and cons, we suggest you learn about the pros and cons of using the combination of these devices.
How to connect a TV like a monitor? Yellow Tips
Easily connect your TV to your computer or laptop
Follow these five easy steps to connect a TV instead of a monitor for gaming, watching movies, and working:
- First of all, it is necessary to determine the type of cable with which the connection will be carried out.
- After the device, you need to connect to each other using the previously selected cable.
- Next, the TV switches to receive a signal from the desired connector.
- After that, you will need to configure a stationary computer or laptop to display a picture on a TV screen.
- If necessary, you may need to adjust the display resolution.
Let’s consider each of the listed steps in more detail.
- Point 1. Initially, you should establish which connectors can be used for your own purposes, ie determine their presence on the TV panel and on the transmitting device. By default, there are three most common types: VGA (an outdated standard used for transferring images, provides a low-quality picture), DVI (a modern digital connector for transferring images), HDMI (one of the most suitable options, provides video and audio data, such the connector is available in most modern devices).
- Step 2. When connecting via HDMI, you do not need to connect additional cables, but if you will use a DVI or VGA connection, you will need an audio cable for sound transmission.
- Item 3. Using the menu functions, you need to configure the TV to receive a signal from the connector where the cable was connected.
- Item 4. There are several ways to configure the transmitting device to display the picture on the TV screen, in particular, using the “Display” function from the keyboard, as well as through the “Screen resolution”. Next, the required image display mode is selected.
- Point 5. If the resolutions on the transmitting and receiving devices are different, then in order to achieve the maximum picture quality, it is necessary to make adjustments to set the correct resolution.
It is impossible to ignore some points regarding LCD TVs. In general, the connection of the LCD-panel of the TV to the laptop is carried out according to the same scheme, however, there are a number of features that are important to know about when using the LCD-device. The fact is that static images on the screen adversely affect the liquid crystal display (LCD). LCD panel manufacturers warn their customers that a static image that is displayed for more than two hours can cause LCD screen burn-in. Adjusting the brightness and contrast can help eliminate image retention. It is also necessary to adjust the image so that it does not occupy part of the screen, because darkened areas may appear in place of the black fields.
Separately, it is worth discussing the possibility of settings to use the TV as a monitor via WI-FI. There are three proven ways to connect these devices wirelessly:
- DLNA connection. This method requires opening network access for content contained on a computer or laptop, after which, using the TV settings, it will be possible to view the content of sources connected via a wireless channel.
- WiDi (Miracast). Allows you to duplicate the image of sources connected via a wireless network.
- Using special adapters to create a wireless pair of “PC (Notebook). TV set”.
It is important to remember the following point: in order to avoid possible damage to equipment, all actions for connecting devices must be performed after disconnecting them from the network.
Conclusion: TV or monitor
As a conclusion, it is worth noting that when deciding what is best to use for displaying computer data, you should consider a number of important aspects. To figure it out, you need to get answers to several key questions:
- For what tasks do you plan to use the computer by connecting it to TV?
- Is it comfortable for you to interact with the system through a TV screen?
- Does the TV have sufficient technical parameters to work comfortably, using it as a monitor??
As for the connection itself, the procedure for connecting devices using a suitable type of cable or via WI-FI, as well as the settings are quite simple, so you can easily use the TV like a regular monitor.
If you clearly understand what you will use the TV for, you are satisfied with the quality of the resulting image and control of the device does not bring additional inconveniences, then you should definitely expand the capabilities of a stationary computer or laptop by connecting a TV to them.
Transmits image, video content and audio signals as packets. Provides high quality transmission without the help of other devices. Sound or video can be transmitted separately. The difference from HDMI is the application. Despite the fact that the latter can be synchronized with a PC, its main purpose is multimedia equipment.
The adapter will help you sync the cord to your DisplayPort source and VGA display. Or connect to 1 channel DVI or HDMI display.
Undoubtedly a better option than a cord. There is no need to place the system unit near the TV due to the short cable length. This affects the attractive appearance of the room in the absence of a lot of hanging cords.
“Minus”. depends on the speed of the net. It connects if the Internet is at least 30 Mbps. Wireless sync in three ways:
- via Wi-Fi adapter (external). For TV sets without a general Wi-Fi adapter;
- via DLNA. For home LAN. On the PC, connect network discovery and file sharing. To activate, go to the “Network and Sharing Center”. In the TV menu, click on the wireless connection;
- via WiDi software (Miracast). It is a home media server for conveniently dubbing content playbacks to external devices via Wi-Fi.
Connecting a TV to a Computer
It’s simple. The only nuance can be in the absence of suitable connectors on both devices. But this task is fixable.
How to connect a TV instead of a monitor? Via cable or Wi-Fi.
- HDMI and DisplayPort cables provide high-quality Full HD picture display and excellent sound, without additional connections.
- But VGA, DVI should be used in the absence of the above plugs. Why? Read below.
On the topic: 5 effective ways to connect a TV monitor to a PC
The simplest and most common connection method. There may be several such connectors on the TV set. One cable carries high quality audio and picture. No other cables are needed, provided that the TV and video card are equipped with this port.
TV as a monitor. can I use: 4 steps to connect
TV monitor instead of computer. yes, you can! Video content, gaming, presentations. all this is more effective to look at on large screens. There are drawbacks in operation. But this is nothing compared to what opportunities open up to the user.
Which is more convenient, a monitor or a TV
Depends on financial capabilities and purposes of application. If you buy a computer monitor with a large display, then the use of a TV as a computer monitor immediately disappears. It is expensive.
A monitor is suitable for working with graphic “pictures”. TV does not convey the fidelity required for such delicate work. When working with browsers on the Internet, it is better not to use a TV.
- First, the TV set is not always adaptive.
- Secondly, the graphics will look ridiculous on the big screen.
Convenience is an important factor. Especially if you have to spend more than 8 hours on a PC. Doing this on TV is uncomfortable, fatigue overwhelms literally in the first half of the day.
We evaluate the positive and negative sides of the TV as a monitor.
The big screen is the dream of gamers, because you can plunge into the gaming world much deeper. But, it is worth considering such a technical feature as Input Lag. This is the delay in displaying images for a certain period of time.
The cursor when moving the gaming mouse on a PC instantly follows your movements, unlike TV, where the action takes place with slowdown. If on a physical level this is not so noticeable, then it affects inveterate gamblers. The indicator is measured in milliseconds (ms), for a comfortable game. no more than 40 ms. These nuances are important to Honor in the first place. Everything else is secondary.
What TVs can be connected to a computer
One way or another, but not every TV screen will serve as a computer monitor. It all depends on the resolution of the TV set. Large diagonal and small resolution promises to show coarse-grained “pictures”. Standard TV models have twice as many pixels as monitors. A good option would be a resolution of 1920 × 1080 pixel. But, this is not the limit. The larger the diagonal, the larger the pixel should be.
Whether a TV can be used instead of a monitor depends on the user’s needs. To work with office applications, browsers on the Internet, a diagonal of 32 inches is enough. You can play games and watch videos on a diagonal of 36 ″ and above.
Using DVI and VGA
DVI transmits a high quality picture. But, you can’t do without an audio wire.
Let’s analyze three variants of DVI-cable in the table:
Unlike the modernized DVI, VGA is a legacy interface. Only “pictures” are not of the best quality. The picture in HD-format will not be displayed. In addition, you need to use a cable (RGA) or “minijack” (3.5 Jack) to transfer the audio signal. Modern TV models are not equipped with it. Both devices must be off to connect.
The TV does not have DVI-I, but there is on the PC video card. connecting devices to help. Options: DVI — VGA or DVI — HDMI.
“Disadvantages” of cords. fastening connection of the socket. If caught on the cord, damage to both devices cannot be avoided.
Setting up the TV after connecting to a computer
You will need a remote control. Press the “Source” or “Input” button on it. Further setup on a PC:
- On Windows 7 and later, press WindowsP to open the Project menu. For other versions. on the PC desktop, right-click and select “Properties”.
- Decide in what form the “pictures” will be displayed. in our case it is “Computer”.
- If necessary, enter the screen resolution in the corresponding window using the slider.
Can the TV be used as a computer monitor? Yes. But the aspects to be judged can change your mind. Consider the degree of need and the technical parameters of the TV. Having found this out, there will be no difficulties with synchronization.